Nextbase ADAPT DAB350BT DAB adapter Instruction Manual

DAB Radio
Instruction Manual
OK
MENU
MODE
PRESET
FM Trx
ADAPT
DAB350BT
Digital DAB/DAB+ radio with Aux in, Bluetooth, Line out and FM transmitter
DAB Radio
INTRODUCTION TO USING A DIGITAL RADIO ADAPTER
The Adapt range of Digital radios have been designed specifically with ease of use in mind, it
is recommended NOT to change the default settings, which have been carefully
selected to give the best performance for day to day use.
Basic operation.
The Adapt DAB radio will automatically perform a full scan when first turned on, so the
supplied Antenna must be correctly installed and connected to the DAB Adapter before
connecting the Car Power Cable. Follow the in-vehicle installation instructions on page 12 for
information on how to correctly install your DAB adapter.
Automatic Start / Stop Technology. The DAB adapter senses power supplied to the
cigarette lighter socket as soon as the vehicle ignition is turned on and will start the radio
automatically. When the ignition is turned off, the DAB adapter will perform an automatic
shutdown process after a set time which can be adjusted in the menu.
Note:
If the vehicle in which the DAB adapter is installed has permanent live cigarette lighter
sockets, the user can simply use the power button on the bottom of the unit to switch the
adapter off.
To take advantage of the Automatic Start / Stop Technology a Nextbase Hardwire Kit can
be installed on a switch-live power supply.
1. Tips for using the DAB adapter:
1.1 Make sure that the Antenna is correctly installed. Follow the instructions on page
12 to ensure that the DAB adapter receives the best signal.
1.2 If using the DAB adapter in a vehicle with stop/start technology in which the cigarette
lighter socket does not supply power when the engine stops, change the auto power
off time to 5 minutes so that in when the cigarette lighter socket stops supplying
power, your DAB radio adapter remains on.
1.3 If a radio station is not present within the stations list, try performing a full scan.
03
DAB Radio
TABLE OF CONTENTS
INTRODUCTION TO USING A DABADAPTER
03
TABLE OF CONTENTS
04
PRECAUTIONS
05
CAUTIONS ON USING THIS PRODUCT
05
PRODUCT SPECIFICATION
06
PACKAGE CONTENTS
07
PRODUCT FEATURES
07
WINDSCREEN MOUNT
08
PARTS AND CONTROLS
09
IN VEHICLE INSTALLATION
12
CONNECTING TO DAB ADAPTER VIA BLUETOOTH
17
HANDSFREE CONFIGURATION
18
RECEIVING CALLS
19
DAB MODE
20
DAB MENU
21
AUX IN MODE
23
AUX IN MENU
24
BLUETOOTH MODE
25
BLUETOOTH MENU
26
TROUBLE SHOOTING
27
NOTES
29
04
DAB Radio
PRECAUTIONS
Please read this manual carefully before operation and keep it for future reference. It will be
helpful should you encounter any operational problem.
WARNING: Do not expose this product to rain, moisture or water under any circumstances,
doing so may result in the risk of electric shock or fire.
CAUTION: To reduce the risk of electric shock, do not perform any servicing other than
that contained in the instruction manual unless you are qualified to do so.
Have the unit serviced by a qualified service technician if;
The unit has been exposed to rain or water.
The unit does not seem to operate normally.
The unit exhibits a marked change in performance.
LCD: A Liquid Crystal Display (LCD) screen is a multilayer complex component,
containing 8,192 pixels. Pixels can however fail during normal product life.
1 pixel = 0.01% failure rate, and one pixel failure per year of operation is
considered normal and not a cause for concern.
WEEE: Disposal of Waste Electrical and Electronic Equipment and/or Battery by
users in private households in the European Union.
This symbol on the product or on the packaging indicates that this cannot be
disposed of as household waste. You must dispose of your waste equipment
and/or battery by handing it over to the applicable take-back scheme for the
recycling of electronic equipment and/or batteries. For more information
please contact your local household waste disposal office.
CAUTIONS ON USING THIS PRODUCT
1. Ensure that the mounting location is free of dirt or grease before placing mount upon it.
2. Do not obscure the view of the road ahead or impede the deployment of any airbags in
the event of an accident.
3. When not in use, please disconnect the car adaptor from both the 12/24Vdc outlet in
your vehicle and the device itself.
4. Only clean the device with a soft dry cloth, for tough dirt, apply some neutral detergent
diluted in 5 to 6 parts water to a soft cloth.
Note : alcohol, thinner, benzene etc. could cause damage to the paint or coatings.
5. Whilst driving, do not adjust the controls of your device as this is a distraction to driving.
05
DAB Radio
PRODUCT SPECIFICATION
Model Number
NBDAB350BT
Power Requirements
5V / .5A
Power Supply
12-24Vdc Car Power Cable (supplied)
Fuse Type: 20mm / 2A
Output: 5Vdc
DAB Frequency Range
174-240MHz
FM Transmitter Frequency 87.5-108MHz
Range
Bluetooth Frequency Range 2402-2480MHz
Screen Size
2.4"
Screen Resolution
128 (W) X 64 (H) pixels
Screen Ratio
2:1
Internal Battery
Lithium-ion 3.7V / 230mAh (approx. 30mins radio listening)
Battery design allows the 'Auto Power Off' feature to function
in event of power loss within the vehicle. It is not intended as
an alternative power source to replace the supplied car
adaptor.
Unit Dimensions
102 x 60 x 31.5mm
Unit Weight
100.5g
06
DAB Radio
PACKAGE CONTENTS
Please check the contents of your NEXTBASE product.
DAB Radio Adapter
Windscreen Mount
Adhesive Mount
Car Power Cable
P/N: NBDAB250-CLC
Input: 12Vdc - 24Vdc
Output: 5Vdc 1.5A
Made in China
MENU
MODE
PRESET
FM Trx
Antenna
Cable Clips
Cable Ties
Screen Wipes
DAB Radio
DAB Radio
Screen wipe
(wet)
Screen wipe
(dry)
Use this wipe first to
clean the area onto
which the antenna
will be applied.
Use the dry wipe to
remove any residue
left by the wet wipe.
Installation Guide
Product appearance may differ slightly to that shown above.
PRODUCT FEATURES
Thank you for purchasing this NEXTBASE Digital DAB radio adapter, this section will outline
some of the features of this Digital DAB radio.
Digital DAB/DAB+ radio with automatic service following function for seamless listening
Service following function allows one to travel between different broadcasting masts and
chooses the strongest signal for the chosen station.
Line out
The line out audio output delivers superior sound quality, allowing DAB/DAB+ radio quality to
be fully appreciated.
FM transmitter
For vehicles without Aux-in connections, and for users who want wire free audio transmission,
The FM transmitter searches for the channel with least interference, allowing easy transmission
with the best audio quality.
Built in battery
Battery allows for seamless use with stop/start vehicles and for use without vehicle engine
running.
Aux-in
Aux-in allows music playing devices to be connected, and listened to through your car speaker
system.
Bluetooth Hands free and music streaming
Bluetooth connectivity for hands free phone calling, and music streaming.
07
DAB Radio
WINDSCREEN MOUNT
Please see below to identify the parts of the supplied windscreen mount.
2
1
4
3
1.
Locking lever
The locking lever is used to attach and release the window mount to your vehicles
windscreen. Pull the lever down to prepare the window mount for use. Once the
mount is firmly upon the windscreen (in a suitable location) push the lever to lock the
mount in place.
2.
Locking ring
Loosen the locking ring to adjust the DAB adapter position if required, remembering
to re-tighten before use.
3.
Suction cup
This is used to attach and release the windscreen mount to your vehicles windscreen.
Only attach to an area of the windscreen where there is no paint effect applied.
4.
Suction release tab
Once the locking lever has been opened use this release tab to break the seal
between the mount and windscreen.
08
DAB Radio
DIGITAL RADIO ADAPTER - PARTS & CONTROLS
Please see below to identify the parts and controls of your Digital Radio Adapter.
Rear:
3
RESET
Made in China
DAB Radio
1
P/N.: NBDAB350BT
Input: 5Vdc
FM: 87.5 - 108MHz
DAB: 174 - 240MHz
4
2
5VDC IN
1.
5VDC in and USB connection
Connect the supplied car power cable here.
2.
Threaded Antenna Connection
Connect the antenna here by carefully screwing it on, only tighten by hand. Tighten
until the coaxial cable no longer freely rotates.
3.
Reset button
In the unlikely event that your DAB radio adapter becomes unresponsive, use a paper
clip or similar to restart it.
4.
Mounting lugs
Attach the supplied windscreen mount here.
09
DAB Radio
DIGITAL RADIO ADAPTER - PARTS & CONTROLS (CONTD.)
Front:
5
OK
MENU
6
5.
MODE
PRESET
7
FM Trx
8
9
Scroll Wheel/OK Button
The scroll wheel is used to choose radio stations and navigate the menu system.
The scroll wheel also functions as an OK button when pressed. This is used to confirm
a selection or action.
Short press: OK/picks up incoming calls.
Long press: Opens hands free menu/rejects incoming calls.
6.
Menu Button
Short press: Short pressing the menu button cycles through information about the
selected radio station.
Long press: Opens the menu.
7.
Mode Button
Press to change between DAB and Aux-in modes.
8.
Preset Button
Short press: Short pressing the preset button opens the preset menu.
Long press: Allows the current station to be stored as a preset.
9.
FM Trx [Transmitter] Button
Short press: Short pressing the FM Trx button allows the FM transmission frequency
to be set manually, using the scroll wheel.
Long press: Automatically searches and chooses the FM frequency with the least
interference, and sets the DAB radio adapter to transmit at this frequency.
10
DAB Radio
DIGITAL RADIO ADAPTER - PARTS & CONTROLS (CONTD.)
Top:
10
10. Preset Buttons
Short press: Select a previously stored preset station.
Long press: Store the current radio station as a preset.
Preset button 10: Whilst in Bluetooth mode and connected to a mobile device, short
pressing button 10 manually synchronises the devices contacts.
Bottom:
AUX IN
LINE OUT
12
13
11
11. Power button
Long press: Power unit on/power unit off.
12. Aux In 3.5mm jack
Used to connect an audio device.
13. Line Out 3.5mm jack
Used to connect the DAB adapter to compatible vehicles line in connections.
11
DAB Radio
IN VEHICLE INSTALLATION
Please read and follow the notes below regarding the positioning of the DAB digital radio
adapter within the vehicle. The DAB adapter is supplied with both a windscreen mount and
adhesive mount for flexibility of installation.
When positioning the DAB radio adapter you must adhere to the following points;
1) The DAB adapter must not obstruct the drivers view.
2) The DAB adapter must not be positioned so that it interferes with or is in the path of
airbag deployment.
3) The DAB adapter must not obstruct your view of any of the controls or instruments in
the vehicle.
4) The DAB adapter must not obstruct the view of the wing or rear view mirrors.
The DAB adapter should be installed so as not to intrude significantly within the
wiped area. A 40mm intrusion into the green wiped area is the maximum permitted by law.
Do NOT mount the DAB adapter in front of the driver, as depicted by the red area in the
above illustration.
When installing the DAB adapter in a vehicle, always make sure that it is mounted securely.
If possible the cables running to the device should be concealed under the cars trim. Make
sure that none of the cables interfere with the drivers operating controls, such as the
steering wheel, pedals or gear lever. The cables also should not obstruct ones view of any
of the vehicles instruments.
Clean the windscreen at the point of location, prior to fitting the DAB adapter. Applying
some moisture to the suction cup may be beneficial, to ensure absolute adhesion.
12
DAB Radio
IN VEHICLE INSTALLATION (CONTD.)
Please follow the instructions below for first-time installation of the Digital DAB Radio.
1.
Installing the Active Antenna
Correct installation of the active antenna is crucial for good DAB radio reception. The
antenna should not obstruct the drivers view. It should be installed on the passenger
side of the vehicle, as shown below.
Antenna positioning for right hand drive vehicle.
Once a suitable location has been found for the Antenna, the first step is to install
the magnetic ground.
Magnetic Ground
Spade connector
Magnet
The Magnetic ground must be affixed to a ferrous object, i.e. the vehicles body.
Typically this is achieved by sliding the magnetic ground under the roof lining of the
vehicle. In most cases you will hear an audible click when the magnet has locates
itself.
If you lightly pull you will be able to feel that the magnet is securely attached. Once
the magnetic ground is located, connect the spade connector to the antenna.
Using the supplied screen wipes, clean the area of the windscreen which the Antenna
will be adhered to, thus making sure the windscreen is clean and free of dirt and/or
grease.
Remove the adhesive backing from the Antenna film and affix it 2.5cm from the A-pillar,
as shown below.
13
DAB Radio
IN VEHICLE INSTALLATION (CONTD.)
2.
Choose location to mount DAB adapter
The DAB adapter is supplied with both a windscreen mount and an adhesive mount
so you have the freedom to mount the adapter in the location that suits your vehicle.
If you choose to mount the adapter on your windscreen then position it as low as
possible so that it does not obscure your view of the road.
MENU
MODE
PRESET
FM Trx
12-24 Vdc Aux In
If you choose to mount the DAB radio adapter on the centre console position the
DAB radio adapter on an area which does not obscure any controls or instruments.
MENU
MODE
PRESET
FM Trx
12-24 Vdc Aux In
14
DAB Radio
IN VEHICLE INSTALLATION (CONTD.)
3.
Route the cabling to the DAB adapter
Route the antenna & power cables to the DAB adapter, the cables can then be hidden
behind the vehicle’s plastic trim, or secured using the supplied adhesive cable clips.
Connect the Antenna to the DAB adapter. The Antenna is connected via a threaded
connector, this should only be tightened by hand.
Note: do not bend, crease or cut the delicate antenna components. Any excess cable
can either be gently tucked behind trim, or coiled up and secured using one of the
supplied cable ties.
Route the supplied car power cable to the DAB adapter and plug in the mini-usb
connector. Plug in the car power cable into the cigarette lighter socket. The DAB
adapter will now power on and will start an automatic scan of all the available DAB
radio stations.
4.
Connecting the digital DAB radio to your car audio system
If the vehicle has an Aux in connection then it is recommended to use supplied Line Out
cable for the best audio quality. Before connecting the supplied line out cable turn your
car audio system to aux-in mode, and turn the volume of your car audio system to zero.
Once you have done this you can connect the line out cable to the DAB adapter and
route it to the aux in port on your vehicle, slowly turn the volume up on the vehicle.
MENU
MODE
PRESET
FM Trx
15
DAB Radio
IN VEHICLE INSTALLATION (CONTD.)
4.
Connecting the digital DAB radio to your car audio system (contd.)
If you do not have an Aux in connection in your car or would prefer to have a wire free
connection then you can connect your DAB radio adapter & your existing car radio via
FM transmission.
With the DAB adapter on the home screen long press the FM Trx button to begin an
automatic search of the FM frequencies, during which the following screen will appear.
DAB+
DAB+
106.6
Searching freqs...
FM channels . . .
The DAB adapter is conducting a search of FM frequencies from 87.5-108Mhz to find
a channel with a suitably low level of interference from any existing radio broadcasts
within your area. Once the search has been completed the selected frequency will be
shown.
DAB+
DAB+
87.6
106.6
Tune to: 87.6MHz
Now tune the vehicle FM radio in which the DAB adapter is being installed to the
frequency displayed on the DAB adapter. Refer to the vehicle user manual if
necessary.
16
DAB Radio
CONNECTING TO DAB ADAPTER VIA BLUETOOTH
This section describes how to connect a mobile phone via Bluetooth to the DAB adapter.
Bluetooth
106.6
Adapter name :
NBDAB350BT
To connect to the DAB Adapter, enter the Bluetooth connections menu in the mobile device
and select the “Adapter name” which is displayed on the DAB adapter when it is in Bluetooth
mode. If prompted during the pairing process, approve the “Contacts Sharing” option whist
connecting with the mobile device. If you are not prompted to share the devices mobile contacts,
then select this option afterwards through the Bluetooth settings menu.
17
DAB Radio
HANDSFREE CONFIGURATION
Now the mobile device is connected via Bluetooth, Hands free calling can be configured. To
make calls from the adapter the mobile device’s contacts must be synchronised.
To access the mobile devices contacts, long push the scroll wheel. The below screen will
appear:
Phone
Recent Calls
Contacts
Please Wait . . .
Note: The first time you try to make a call, the mobile device contacts synchronise. Please
wait until this is complete, it can take up to 5 minutes if the mobile device has a large
number of contacts.
When this message leaves the screen, the contacts from the mobile device have been
imported, now if you long press the centre scroll wheel in any mode, you can access your
contacts, and make calls via the DAB adapter. The contacts are split alphabetically for
quicker navigation. If the mobile device’s contacts are not synchronised successfully check
that the contacts sharing option is approved within the Bluetooth connection settings on the
mobile device.
Name
A
B
C
Once the desired contact has been reached in the menu, make the call by pressing the scroll
button. To hang up simply press the scroll button again.
Note: Each time a different device is connected via Bluetooth and the contacts menu is
accessed the new mobile devices contacts are synchronised.
Note: If new contacts are added to the mobile device, the contact list must be re-sychronised.
To manually synchronise the mobile device’s contacts, when the DAB adapter is in Bluetooth
mode, press the 10thpreset button.
18
DAB Radio
RECEIVING CALLS
Now the mobile device is connected via Bluetooth, and hands free calling has been configured.
If the mobile device is connected and receives a call, it can be answered with the DAB adapter
by clicking the scroll wheel, to reject the call, long press the scroll wheel. The incoming call
screen is shown below:
Bluetooth 106.6
Incoming Call:
+442920 866429
19
DAB Radio
DAB MODE
The key below explains the various information displayed on the screen when your Digital
DAB radio adapter is in DAB mode.
1
2
3
4
DAB+
Radio Station
Station Genre
Show information
5
6
7
1.
Signal strength: indicates the strength of the signal received by the DAB adapter.
2.
DAB/DAB+ indicator: indicates whether the station is a DAB or DAB+ broadcast.
3.
Audio out indicator: indicates if the Digital DAB audio adapter is broadcasting FM
or using the Line out connection.
4.
Battery indicator: indicates if battery is being charged, otherwise indicates battery
level.
5.
Radio station: Displays the name of the radio station selected.
6.
Station Genre: Displays the genre being listened to.
7.
Show information: displays information about the show being listened to.
20
DAB Radio
DAB MENU
To access the DAB menu, simply long press the menu button whilst in DAB mode.
Menu
Setup
Auto Scan
System Reset
1.
System
Make settings changes to the digital DAB adapter system.
a. Brightness
Select the brightness of the screen.
Options : High, Medium, Low
b. Traffic Information
Select whether you would like traffic information to interrupt the radio station
you are listening to.*
Options : On, Off
*Only available in areas which broadcast traffic information.
c. Auto Power Off
Select the length of time the DAB digital radio adapter remains on before
automatically shutting down after the unit stops receiving power.
Options : 10s, 5m, 20m, 15m
d. Line Out Volume
Select the audio output level for the line out socket.
Note: the Low setting is to be used if distortion is heard on the vehicle speaker
system.
Options : High, Low
e. Button Lights
Select whether you would like the back-light for the buttons to be turned on or
off.
Options : On, Off
f. Language
Select the language for the device menus.
Options : English, Norwegian
2.
Auto Scan
Perform a full scan for available DAB/DAB+ stations.
21
DAB Radio
DAB MENU (CONTD.)
Continued from previous page.
Menu
Auto Scan
Default Settings
System Info
3.
Default Settings
Selecting this menu item resets the DAB adapter to its original factory settings.
Options : On, Off
4.
System Info
Selecting this menu item opens a page displaying which version of firmware the
Digital DAB radio adapter is using.
22
DAB Radio
AUX IN MODE
The key below explains the various information displayed on the screen when your Digital
DAB radio adapter is in ‘Aux in’ mode.
1
Aux In
2
3
106.6
Aux In
1.
Mode title: indicates that you are in Aux In in mode.
2.
Audio out indicator: indicates if the Digital DAB audio adapter is broadcasting FM or
using line out connection.
3.
Battery indicator: indicates if battery is being charged, otherwise indicates battery
level.
23
DAB Radio
AUX IN MENU
To access the Auxiliary menu, simply long press the menu button whilst in Auxiliary mode.
Menu
Setup
Default Settings
System Info
1.
Setup
Make settings changes to the digital DAB adapter system
a. Brightness
Select the brightness of the screen.
Options : High, Medium, Low
b. Auto Power Off
Select the length of time the DAB digital radio adapter remains on before
automatically shutting down after the unit stops receiving power.
Options : 10s, 5m, 20m, 15m
c. Line Out Volume
Select the audio output level for the line out socket.
Note: the Low setting is to be used if distortion is heard on the vehicle speaker
system.
Options : High, Low
d. Button Lights
Select whether you would like the back-light for the buttons to be turned on or off.
Options : On, Off
e. Language
Select the language for the device menus.
Options : English, Norwegian
2.
Default Settings
Selecting this menu item resets the DAB adapter to its original factory settings.
Options : On, Off
3.
System Info
Selecting this menu item opens a page displaying which version of firmware the
Digital DAB radio adapter is using.
24
DAB Radio
BLUETOOTH MODE
The key below explains the various information displayed on the screen when your Digital DAB
radio adapter is in Bluetooth mode.
1
Bluetooth
2
3
4
106.6
Adapter name :
NBDAB350BT
5
1. Mode title: Labels which mode the DAB adapter is currently in.
2. Bluetooth connection indicator: indicates that a device is connected via Bluetooth.
3. Audio out indicator: indicates if the Digital DAB audio adapter is broadcasting FM or
using line out connection.
4. Battery indicator: indicates if battery is being charged, otherwise indicates battery level.
5. Adapter name : States the Bluetooth name of the DAB adapter.
25
DAB Radio
BLUETOOTH MENU
To access the Bluetooth menu, simply long press the menu button whilst in Bluetooth mode.
Menu
Setup
Default Settings
System Info
1.
Setup
Make settings changes to the digital DAB adapter system
a. Brightness
Select the brightness of the screen.
Options : High, Medium, Low
b. Auto Power Off
Select the length of time the DAB digital radio adapter remains on before
automatically shutting down after the unit stops receiving power.
Options : 10s, 5m, 20m, 15m
c. Line Out Volume
Select the audio output level for the line out socket.
Note: the Low setting is to be used if distortion is heard on the vehicle speaker
system.
Options : High, Low
d. Button Lights
Select whether you would like the back-light for the buttons to be turned on or off.
Options : On, Off
e. Language
Select the language for the device menus.
Options : English, Norwegian
2.
Default Settings
Selecting this menu item resets the DAB adapter to its original factory settings.
Options : On, Off
3.
System Info
Selecting this menu item opens a page displaying which version of firmware the
Digital DAB radio adapter is using.
26
DAB Radio
TROUBLE SHOOTING
PROBLEM
SOLUTION
The sucker will not stay in
Ensure that the protective cover (plastic film) has been
place upon my windscreen. removed from the suction pad.
Moisten the sucker slightly before affixing upon the
windscreen.
Ensure that the locking lever is fully open when the sucker is
pushed on to the windscreen and then close the lever.
Make sure that the glass is smooth and clean.
Do not stick the windscreen mount to glass that has any
non-smooth effect or paint whatsoever. Affix to the glass
firmly and then close the locking lever fully.
The cigarette power cable is not working. Inspect the fuse
No power to my adapter,
but it works when used with in the Car Power plug. Replacement fuse = 2A 20mm type.
If the fuse is found to be blown, inspect the power cable for
other power sources.
damage which may have caused the fuse blow.
My adapter shuts down by
itself after a while.
There is no power to the DAB adapter and the Auto
Power Off command has been triggered.
The battery will not charge. Ensure the DAB adapter is connected to a reliable
power source and that the supplied Car Power Cable is being
used, with the Car Power Cable LED lit.
The battery does not last for The battery will only charge when the DAB Digital Radio
the full auto power off time Adapter is connected to power. Charging takes approximately
90 minutes, so if the DAB digital radio is frequently used
that is set in the menu.
when the car engine is not running it will discharge the
battery, and if only short journeys are taken the battery will
not fully recharge. Charge the battery fully using the supplied
Car Power Cable.
The DAB reception is poor. Check that the Antenna is installed correctly, specifically that
the magnetic ground is still attached to the car body, and the
coaxial connector on the rear of the radio is securely
connected, so that it does not freely rotate. Also check for
damage to the coaxial cable.
When using the ‘Line Out’ Go into the system menu and change the ‘Line Out Level’
setting to low.
function to connect to my
car there is distortion of the
sound in my vehicle.
When using the FM
transmitter the sound
quality is poor.
There is interference on that specific FM frequency, refer
to page 16 to change the transmission frequency to one
without interference.
27
DAB Radio
TROUBLE SHOOTING (CONTD.)
PROBLEM
SOLUTION
The radio is frozen and
does not respond.
Use a paper clip or similar thin object to press the reset
button, which is located above the antenna on the back of
the radio.
Bluetooth contact
synchronisation not
working.
Make sure that the “share contacts” option is confirmed
within the settings menu specific to the Bluetooth
connection between the mobile device and the DAB adapter.
Mobile device will not
connect via Bluetooth.
Enter Bluetooth settings on the mobile device and “forget”
the connection to the NBDAB350BT, now perform a system
reset on the NBDAB350BT and try connecting once the
DAB adapter has restarted.
Downloading files from
www.nextbase.co.uk
using Google Chrome
results in a Malicious
Software message.
This is not a cause for concern, simply go to the settings
within Google Chrome and turn off the malicious software
protection temporarily to download and install the playback
software.Reinstate previous Google Chrome settings
thereafter.
Unresolved issues.
Reset the DAB adapter to the Default Settings within the
Menu and try again.
Should the problem persist call the helpline
(02920) 866429 or
email: [email protected]
28
DAB Radio
NOTES
29
www.nextbase.co.uk
NBDAB350BT-IM-ENG-R6