advertisement
▼
Scroll to page 2
of 61
RH7929CP1L_NA6ILL_ENG HDD/DVD RECORDER OWNER'S MANUAL MODEL : RH7900MH Before connecting, operating please read this instruction adjusting this product, booklet carefully and completely. or CAUTION CAUTION Most the Power Cord concerning appliances recommend they be placed upon a dedicated circuit; That Check the INSTRUCTIONS ARE FOR USE BY INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. Caution: The apparatus should not be exposed to water (dripping or splashing) vases, should be placed liquids, on of this owner's manual to be outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are CONTAINED IN THE OPERATING filled with specification page Do not overload wall outlets. Overloaded wall SERVICING OTHER THAN THAT objects outlet circuit which powers only that and has no additional outlets or branch circuits. single certain. QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY no a appliance CAUTION: THESE SERVICING and is, such as the apparatus. dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the a appliance. SERIAL NUMBER: You can find the serial number This number is unique on the back of the unit. to this unit and not available to others. You should record retain this CAUTION: This product employs Laser a System. Serial No. To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments, or the performance of procedures other than herein may result in hazardous radiation exposure. those specified To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. WARNING: Do not install this confined space such similar unit. a This product DIRECTIVE 73/23/EEC. as a equipment bookcase in or is manufactured to the radio interference 2 Model No. comply with requirements of EEC 89/336/EEC, 93/68/EEC and guide as a requested information here and permanent record of your purchase. ______________________________ ______________________________ Playing an Audio CD or MP3/WMA file Program Playback with Audio CD and Contents Introduction............................4-10 SymbolUsedinthisManual................4 . .5 RecordableandPlayableDiscs PlayableDiscs..........................6 RemoteControlOperation.................6 . . Abouttheinternalharddiskdrive . . . . . . . . . . . . . . . . . . . . .33-34 . MP3/WMAfile..........................35 ViewingaJPEGFile..................36-37 .38-39 Editing a MP3/WMA, JPEG, DivX file . NotesonDiscs..........................4 . . . . . . . .7 Carduseableonthisunit....................7 Disc-relatedterms.......................8 FrontPanel.............................9 RemoteControl........................10 HookupandSettings....................11-26 Recording............................40-45 AboutDVDrecording....................40 AboutHDDrecording....................40 Timeshift..............................41 BasicRecordingfromaTV................42 InstantTimerRecording..................42 TimerRecording........................43 Simultaneous recording and playback .43 .44 Checking Timer Recording Details .44 RecordingfromanExternalInput RecordingfromDVInput.................45 . RearPanel............................11 ConnectingtotheAerial..................11 ConnectionstoYourTV..................12 HDMIconnection.......................13 . . . . . . . . . . . . . . . . . . . . . . . . . Editing...............................46-52 Title List and Chapter List Menu Overview .46 .47 HDD, VR Mode: Original and Playlist Editing AddingChapterMarkers.................47 ChangingTitleThumbnails................47 MakingaNewPlaylist....................48 Adding Additional Title/Chapters to the Playlist .48 .49 Deleting an Original or Playlist Title/Chapter DeletingaPart.........................49 NamingaTitle.........................50 . ConnectingtoanAmplifier................14 Accessory Audio/Video (A/V) Connections .15-16 UsingtheHomeMenu...................17 InitialSettings.......................17-26 GeneralSettings..................17-20 AutoProgramming...................17 ProgramEdit........................18 . AutoClockSet......................19 ManualClockSet....................19 TVAspect..........................19 DisplayMode.......................19 ProgressiveScan....................20 PBC..............................20 LanguageSettings....................20-21 AudioSettings.........................21 .21 DolbyDigital/DTS/MPEG. SamplingFrequency..................21 .21 DRC(DynamicRangeControl). . . . . . . . . . . . . . . . . . . Vocal..............................21 Lock .22-23 (Parental Control) Settings .22 Rating/SetPassword/AreaCode DivXRegistrationCode...............23 RecordingSettings...................23-24 . . . . . . . . . . . . . . . RecordModeSet....................23 RecordAspect.......................23 DVRecordingAudio..................24 TVRecordingAudio..................24 AutoChapter........................24 DiscSettings........................24-25 DiscFormat........................24 Undoing/Redoing the Last Deletion CombiningTwoTitlesIntoOne . General Explanation of On-Screen . . Display . . . . . . . .25 .26 Playback.............................27-39 Playing a HDD, DVD, DivX file or Video CD .27-30 PlayingaDivXMovieFile..............31-32 . . . . . . . . . . . . . . . . . . . . . . . . .50 .51 DivideOneTitlesIntoTwo................51 .51 CombiningTwoChaptersIntoOne MovingaPlaylistChapter.................52 HideaChapter/Title.....................52 . . . . . . . . ProtectaTitle..........................52 Dubbing..............................53-55 BeforeDubbing.........................53 DubbingfromHDDtoDVD...............54 DubbingfromDVDtoHDD................54 .55 OneTouchCopy(HDDtoDVD). .55 OneTouchCopy(DVDtoHDD). . . . . . . . . . . . . . . . . . . . . Reference............................56-61 AdditionalInformation....................56 OverwritingRecording.................56 Viewing Title List menu displayed on other DVDRecordersorPlayers.............56 Playing Your Recordings on Other DVD .56 Players(FinalizingaDisc). LanguageCodes.......................57 . Finalize/DiscLabel/DiscProtect . Sort.................................50 . Initialization.........................20 . . . . . . . . . . . . AreaCodes...........................57 Controlling Your TV with the Supplied RemoteControl........................58 Troubleshooting......................59-60 Specifications..........................61 3 Introduction To proper use of this product, please read this owner's manual carefully and retain for future About the Symbol Display ensure reference. " " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available This manual provides information on the operation on that specific DVD video disc. and maintenance of your recorder. Should the unit require service, contact an authorized service location. Symbol Used in this Manual The flash lightning symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute electric shock. a risk of Notes on Discs Handling Discs Do not touch the the disc on by the playback side of the disc. Hold edges so that fingerprints do not get the surface. Never stick paper or tape on the disc. The exclamation point alerts you to the presence of important operating and maintenance / servicing instructions. Indicates hazards unit itself likely to other material or cause harm to the damage. Note: Indicates special notes and operating features. Tip: Indicates tips and hints for A section whose title has applicable only symbol. are HDD the task easier. of the following symbols represented by the Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. the HDD recording DVD-RW with Video mode recording mode DVD+RW disc -R DVD-R disc +R DVD+R disc DVD on DVD-RW with VR -RWVideo +RW one to the disc Titles recorded -RWVR making Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. DVD-Video disc VCD Video CDs ACD Audio CDs DivX DivX files MP3 MP3 files WMA WMA files Do not strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static use spray intended for older vinyl records. Moisture Condensation JPEG JPEG files Never operate this product immediately after moving it from a Leave it for two If you or 4 a warm three hours without product in damage discs/tapes and use this cold location to such location. operating situation, it may internal parts. a it. Recordable and DVD-RW DVD-RW discs on the Video Disc (Digital These Discs Discs Playable can ReWritable): - be formatted for VR mode be recorded can recording repeatedly. Recordings on or Video mode be can recording. erased, then you can record again Disc. same [VR mode] Recordings can be extensively edited Playable only on VR mode compatible players (after finalization) [Video mode] Playable on regular DVD players (after finalization) Limited editing features DVD-R Video Disc (Digital These Discs be can Recordable) recorded only once. After - you finalize DVD-R, you a cannot record on it edit or it. DVD-R discs be can only formatted to Video mode. Playable on regular DVD players (after finalization) Limited editing features DVD+RW These Discs on the Video Disc (Digital same Playable can + be recorded ReWritable) on repeatedly. Recordings be can erased, then you DVD+R it any again DVD+RW (Digital These Discs record Disc. compatible players (automatically finalization) The edited contents are playable on DVD+RW compatible players only Recordings can be edited the title/chapter on can Video Disc can be Recordable) recorded only once. After after finalization + you finalize a DVD+R, you cannot record on it or edit more. Playable on DVD+R compatible players (after finalization) Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added chapter mark, etc.) Limited title/chapter editing features. DVD+R DL These Discs edit it any Video Disc (Digital can be recorded + Recordable; Double Layer) only once. After you finalize a DVD+R DL, you cannot record it on or more. space is nearly doubled with double to 8.5GB of video on a single DVD+R disc. Storage layer DVD+R media, allowing consumers to record up Playable on DVD+R DL compatible players (after finalization) Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter combine, added chapter mark, etc.) Limited title/chapter editing features. The recommendable recordable DVD discs DVD-R SONY DVD+R (8x, 16x) TDK (4x, 8x) Verbatim (4x, 8x) Panasonic (2x, 4x) DVD-RW SONY (2.4x, 4x, 8x, 16x) TDK (4x) Mitsubishi (4x, 8x) Ricoh (2x, 4x, 8x) DVD+RW Victor SONY (1x, 4x) Maxell (1x, 2x, 4x) TDK (2x) Mitsubishi (2x) (2.4x) TDK (2.4x) Philips (4x) Ricoh (2.4x) ---H P (2.4x, 4x) DVD+R(DL) Mitsubishi (2.4x) Maxell (2.4x) - - - Note: If a DVD-RW/DVD+RW discs is recorded So if you want to use the disc on this using a personal computer recorder, you other DVD or must format the disc using the recorder, you original cannot format the disc using this recorder. recorder. 5 Playable Discs DVD(8cm/12cmdisc) Discs such Video CD movies that as (VCD) (8 VIDEO CDs or cm be can / 12 cm purchased or rented disc) CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format AudioCD(8cm/12cmdisc) Music CDs or CD-R/CD-RW CD-Rs/CD-RWs in music CD format that (8 cm / 12 cm can be purchased disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files. Notes: -- -- -- -- -- -- recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions. Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not be playable. DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens. If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) Depending Regional on the conditions of the code of the recorder and DVDs This recorder is 2 region code This unit on designed and manufactured for the labels of some playback of Region 2 encoded DVD software. The DVD discs indicates which type of the recorder can play those discs. ALL. If you try to play any other discs, the message play only DVD discs labeled 2 or "Incorrect region code. Can't play back" will appear on the TV screen. code label even though their playback is prohibited by area limits. can Some DVD discs may not have a region Notes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. Refer also to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be played on the unit. Remote Control Operation Point the Remote Control at the remote Remote Control Battery sensor and press the buttons. Installation Remove the battery batteries with cover on and the matched rear of the Remote Control, and insert two R03 (size AAA) correctly. Caution Do not mix old and etc.). 6 new batteries. Never mix different types of batteries (standard, alkaline, Card useable About the internal hard disk drive Compact The internal hard disk drive (HDD) is We recommend that you back up your important recordings onto DVD discs in order to protect against accidental loss. move Install and the recorder while it is use the recorder on a on. stable, level surface. Do not block the Do not rear vent/cooling is excessively hot or humid places, or in places that may be subject to sudden changes in temperature. Sudden changes in use the recorder in temperature can cause the recorder. This can condensation to form inside be a cause Regarding Introducin Write Protect For cards that have fan. (CF) (MD) Secure Digital Card (SD) Multi Media Card (MMC) SmartMedia Card (SMC) xD-Picture Card (xD) Memory Stick (MS) Memory Stick Pro (MS-Pro) Compatible with: FAT 12, FAT 16, or FAT 32 Only use the memory cards recommended above. failure. Do not Flash Card Micro Drive of fragile piece equipment. Please use the recorder following the guidelines below to protect against possible HDD a this unit on on it will not protect switch, if the switch be possible to write, erase or format a write the card. the Inserting/Removing Memory Card of HDD failure. While the recorder is switched on, do not unplug from the wall socket or switch the electricity off from the breaker switch. Do not move the recorder immediately switching it off. If you need to move please follow the steps below: the from the wall socket. Unplug there is a the memory card out of reach of children. If swallowed, seek medical advice immediately. Keep power failure while the recorder is on chance that some data on the HDD will A memory card may not be used for this recorder Do not extract the memory card in operating be lost. The HDD is very delicate. If used improperly or in an unsuitable environment, it is possible that the Signs of problems include playback unexpectedly freezing and noticeable block noise (mosaic) in the picture. However, sometimes there will be no warning signs a few years of use. of HDD failure. If the HDD will be fails, possible. replace the HDD no playback In this SD, MMC, SMC, xD, MS, or MS-Pro card Inserting the card: Insert straight-in until it fits into place. Removing the card: Withdraw the card carefully. a HDD will fail after Insert MD Notes: 3. Move the recorder. If there's or recorder, 1. After the message POWER OFF is shown in the display, wait at least two minutes. 2. Insert CF after case of recorded material it will be necessary to (play, copy, move, etc.). Using Memory Card 1. Insert 2. Press HOME 3. Select [MEMORY CARD] option 4. Select [Memory a memory card. on the remote control. Card 1] or then press B. [Memory Card 2] then press ENTER. unit. 5. Select the [TV(HDD)], [MUSIC], or [PHOTO] option. Details for the options are on page 17. 7 Disc-related terms PBC: Playback Control (Video CD only) Playback control is available for Video CD (VCD) DVD +R version 2.0 disc formats. PBC allows you to interact with the system via menus, search functions, or other (Double Layer) Double layer recording technology offers two recordable layers on a single DVD disc, providing nearly double the capacity of 4.7GB single layer DVDs. The most valuable benefit of double greatest, layer recording technology is increased capacity. Storage space is nearly doubled with double layer DVD+R media, allowing consumers to burn up to 8.5GB of video on a single DVD+R disc. CDs. Title DVD±R/DVD±RW DVD -R and DVD +R are two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc DVD +RW and DVD -RW once. re-writable media, meaning the DVD erased and re-recorded. 4.38 Gigabytes only two standards for are content Single-sided discs can can be hold and double-sided discs hold twice as much. VCD (DVD video discs only) A title is generally a distinct section of a DVD disc. For example the main feature could be title 1, a documentary describing how the film was made could be title 2, and cast interviews could be title 3. Each title is assigned a reference number enabling you to locate it easily. Chapter (DVD video discs only) A chapter is a segment of a title such film or one interview in a series. Each with quality stereo sound. MPEG MPEG is an international standard for video and audio compression. MPEG-1 is used in encoding video for VCD and provides for multichannel surround sound coding such as PCM, Dolby Digital, DTS and MPEG audio. Scene a is On (VCD) video CD with PBC (playback control) functions, moving pictures and still pictures are divided into sections called "scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want. A scene is composed of one or several tracks. a Track A distinct element of audiovisual information, such as the MP3 MP3 is popular compression format used for digital files that yields very high near-CD quality. a Windows media audio file. A developed by Microsoft type of coding / decoding Corp. JPEG Joint Pictures Expert Group. file format that allows you to on the number of colors. JPEG is save compressed images with no limit a DivX DivX is the name which is based on of a the revolutionary new using this recorder. new MPEG-4 standard for video.You will be able movies picture or sound track for a specific language (DVD), or a musical piece on a video or audio CD. Each track is assigned a track number, enabling you to locate the track you want. DVD discs allow track of video WMA 8 chapter in may not be recorded. A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB disc) of MPEG-1 full-motion video audio as a scene assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters (Video CD) along typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) operate in the same way as audio video codec compression to play DivX of audio. (with multiple angles) one and several tracks Front Panel abcde f g hi T/S REC HDD DVD j TV kl m a n op POWER button and indicator TV: Switches the recorder ON mode. Lights or OFF. up red when the recorder is in standby : mode. b HDD/DVD or playback. Pause playback or recording temporarily, press again to exit pause mode. g h INPUT4 (VIDEO IN/AUDIO IN (Left/Right)) output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.). Press repeatedly to set the l (S-VIDEO IN) output of an external (TV/ Monitor, VCR, Camcorder, etc.). through memorized channels. Connect the DV n closes the disc tray. window Shows the current status of the recorder. timeshifting REC: The recorder is output of mode. o MS HDD: The recorder is HDD mode. camcorder. TV/playback (timeshift) for a a memory card (CF/MD). MEMORY CARD Slot 2 Insert recording. digital MEMORY CARD Slot 1 Insert p a TIMESHIFT Activates pause live live TV program. i Display source mDVIN (Z) T/S: Indicates the INPUT 4 Connect the S-Video Disc Tray Insert a disc here. or Indicates k recording. or PROG. (V/v) Scans up or down Opens programmed. Remote Sensor Point the recorder remote control here. z (REC) OPEN/CLOSE is Connect the audio/video recording. recording time. f recording j x Starts timer clock, total playing time, elapsed time, title number, chapter/track number, channel, etc. DVD. Starts (STOP) Stops playback or a : cN/X(PLAY/PAUSE) e Indicates when the recorder is in timer recording Set the recorder's mode to HDD d Indicates when the recorder is in TV tuner a memory card (SD/MMC/SMC/xD/MS/ Pro). DVD: The recorder is DVD mode. HDD bBDVD: The recorder is dubbing. 9 Remote Control CHP ADD: Inserts marker when chapter playing/recording. CLEAR: Removes the on the Marker Search or a mark on menu. (or DVD to HDD HDD to ENTER - - selection. Acknowledges Displays information while viewing a TV program. menu HOME: Accesses the menu. I.SKIP (INSTANT SKIP): Skips seconds forward on (about the length commercial). of 15 the disc typical a TV: point during playback. menu on a DVD disc. Switches between Title and Title List-Playlist menu. (Z): Opens closes the disc tray. options a menu. THUMBNAIL: Selects TIMER REC: and TV program. menu, if available. playback or press again by to exit pause mode. TV Control Buttons on or off. playback. - or OFF. - RANDOM: b / B / v / V (left/right/up/down): Selects an option in the menu. v / V (up/down): Scans up or down through memorized channels. A-B: Repeat sequence. a DVD camera an audio language (DVD) channel (CD). or an REC (z): Starts recording. Press repeatedly to set the recording time. (HQ, SQ, LQ REPEAT: RETURN audio - - use or for DV the recorder tuner or recording EQ). Repeat chapter, track, (O) Removes the Displays the with PBC. menu. menu of a video CD or the TV tuner. POWER: Turns the TV on or off. source. PR +/--: Selects TV's channel. VOL +/--: Adjusts TV's volume. MUTE: Temporarily turns TV sound OFF, press again to restore. title, all. Changes the input to recording (Tuner, AV1-4, IN). 10 order. mode if available. AUDIO: Selects AV: tracks in random REC MODE: Selects the ANGLE: Selects angle, Plays by -AV: Selects the TV's POWER: Switches the recorder during playback. the disc's Title Displays selected ON Timer menu. (X) : Pause recording temporarily, Starts thumbnail a TIMESHIFT: Activates pause live TV/playback (timeshift) for a live - SURROUND Displays PAUSE/STEP (PLAY): subtitle picture for the current title and chapter for use in the Original and Playlist menu. - 3D SURR.: Selects 3D a or TV/DVD: To view channels PIP: Selects PIP function in SUBTITLE: Selects TITLE: OPEN/CLOSE N or track. Record MENU/LIST: Accesses numbered SKIP(./>):Gotonext chapter or track. Returns to beginning of current chapter or track or go to previous chapter language. MARKER: Marks any 0-9 numerical buttons: Selects menu. (x): Stops playback recording. or removes the or removes STOP HOME List-Original Marker Search Displays menu. Setup Display. Copies DVD). forward. or SEARCH: Search M): SETUP: Accesses DISPLAY: Accesses On-Screen DUBBING: / (m backward track number a List Program SCAN a ZOOM: image. Enlarges DVD video and Hookup Settings Rear Panel abcdef lmn a g hi o i AERIAL Connect the aerial to this terminal. b c AUDIO OUT (Left/Right) Connect to TV with audio k TV with video inputs. (Y Pb Connect to a l TV with Y Pb Pr m VIDEO OUTPUT Switch or RGB to the TV. fan AC Power Cord into the power source. RF. OUT signal from the AERIAL to your AUDIO IN 3 (Left/Right) Connect the audio output of an external source (Audio system, TV/Monitor, VCR, Camcorder). nVIDEOIN3 Connect the video output of an external source (Audio system, TV/Monitor, VCR, Camcorder). EURO AV 1 AUDIO/VIDEO Connect to a TV with SCART jack. o output of Set (Pay-TV decoder, source COAXIAL Connect EURO AV 2 DECODER Connect the audio/video h audio and video. interface for TV/monitor inputs. signal of EURO AV1 AUDIO/VIDEO terminal depending on how you connect the recorder g digital Passes the Pr) Select either COMPONENT VIDEO OUT f HDMI (Type A) output providing a high quality Plug COMPONENT VIDEO OUT/PROGRESSIVE SCAN e a HDMI Connector j Cooling inputs. VIDEO OUT Connect to d a jk an (Digital audio out jack) to digital (coaxial) audio equipment. external Top Box, VCR, etc.). OPTICAL Connect (Digital audio out jack) to digital (optical) audio equipment. Connecting to the Aerial Rear of TV Aerial SCART INPUT Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the recorder. socket aerial on Plug one ANTENNA INPUT AUDIO INPUT VIDEO INPUT end of the aerial cable into the TV the recorder and the other end into the input socket on your TV set. R RF coaxial connection Connect the RF. OUT jack on the recorder to the aerial input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The RF. OUT jack passes the signal through from the AERIAL jack. Rear of the recorder 11 SCART connection Connections to Your TV Make on of the following connections, depending capabilities of your existing equipment. one the When using jack the recorder to the the TV using the scart jacks, jack, using the set the VIDEO OUTPUT switch to the recorder to the video in video cable jack on Tips your TV and other equipment you wish to connect, there are various ways you could on connect the recorder. Use only one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution Make the directly to the Tune the TV to the correct video input channel. not connect the recorder's AUDIO OUT jack to phono in jack (record deck) of your audio sure the recorder is connected system. -- (V). Connect the COMPONENT VIDEO OUT/ Depending Do the TV jack on using the Video connection Component -- on Connect the VIDEO OUT RGB. TV. jacks Video connection set the VIDEO OUTPUT switch to COMPONENT. When -- in corresponding cable (T). on the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN SCART Connect the EURO AV1 AUDIO/VIDEO scart PROGRESSIVE SCAN jacks on the recorder corresponding input jacks on the TV using an cable (C). Progressive Scan If your television is protection system. Y Pb Pr connection high-definition or "digital ready" television, you may take advantage of the recorder's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the recorder. a Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN Do not connect your recorder via your VCR. The DVD image could be distorted by the copy to the in corresponding cable (C). jacks jacks on on the TV the recorder to the using the Y Pb Pr Notes: Set the Rear of TV SCART INPUT AUDIO INPUT VIDEO INPUT COMPONENT VIDEO INPUT Y Pb Progressive to [ON] on the setup menu for progressive signal, see page 20 Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack). Pr Caution Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the AV C T recorder. First, remove the disc in the recorder. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard visible Audio picture will once again be conventional analog TV or monitor. setting, on a and a (Left/Right) Connection Connect the left and right AUDIO OUT recorder to the audio left and using the audio cables recorder's AUDIO Rear of the recorder 12 (record deck) right (A). Do OUT jack to of your audio IN jacks of the jacks on the TV not connect the the phono system. in jack RH7929CP1L_NA6ILL_ENG-59J HDMI connection HDMI compatible TV HDMI If you have a HDMI TV or monitor, you to this recorder using a HDMI cable. can connect it 1. Connect the HDMI HDMI jack on a jack on the recorder to the HDMI compatible TV or monitor H (H). 2. Set the TV's to HDMI source (refer to TV's Owner's manual). SHokupand et ings Notes: When you use the HDMI connection, the audio's sampling frequency is outputted only even if you select [96KHz]. This recorder does not decoding of perform multi channel surround, you recorder to DTS a this recorder's Rear of the recorder internal DTS sound track. To a with 48KHz (2 channel) enjoy DTS must connect this compatible receiver digital audio outputs. via HDMI of one No sound will be outputted from HDMI cable if the [Dolby Digital] or [MPEG] option is not set to [PCM] on the Setup menu (See page 21). The the cable connector arrow on up for correct recorder. alignment should face body with the connector About HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices. HDMI developed to provide the technologies of HDCP (High Definition Contents Protection). HDCP is used to protect digital content transmitted and was received. the on HDMI has the enhanced, or capability to support standard, high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and between the AV (Type A) If there is noise lines or on source and communication and AV devices such as DTVs. the screen, please check the HDMI cable. HDMI, the HDMI logo and High-Definition Multimedia Interface HDMI Tip connectors), are trademarks or registered trademarks of licensing LLC. : When you resolution HDMI the connection, you change (576i, 576p) for the HDMI output by setting the [Progressive Scan] option in the setup menu. use (See page 20) Progressive Scan Progressive Scan can Additional Information for HDMI When you connect a HDMI or DVI compatible device make sure of the followings: -T ry ON mode: recorder. 576p OFF mode: 576i The recorder does not on - - Caution Changing Progressive Next, switch input is set The connected device is Not all recorder and then turn it this recorder. - seconds, then switch for this unit. recorder is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the again. the HDMI/DVI device The connected device's video 720(1440)x576i input. Scan mode when the on on this recorder. correctly the off the HDMI/DVI device and this and leave it for around 30 support 720p and 1080i resolutions for HDMI. switching It's or compatible with 720x576 progressive video HDCP-compatible DVI devices will work with impossible copy protected-DVD playback in non-HDCP devices. title's 13 Connecting to an Amplifier Rear of the recorder Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and recorder to the audio amplifier, receiver, cables (A). or jacks on the left and right in jacks on your stereo system, using the audio Right AUDIO OUT Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) 1. Connect one A X O of the recorder's DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. AUDIO INPUT 2. Digital digital multi-channel sound quality. For this on page digital 21). connection provides the best Manufactured under license from "Dolby", audio formats trademarks supported by your recorder (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Caution: Due to the DTS Licensing agreement, the digital DTS digital out when DTS audio output will be in stream is selected. Notes: If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. --To see the audio format of the current DVD in the press AUDIO. This recorder does not perform internal display, on-screen decoding of DTS sound track. To a multi channel surround, you recorder to DTS a this recorder's (2 channel) enjoy DTS must connect this compatible receiver digital audio outputs. via one of "Pro Logic", of Dolby "DTS" and "DTS Theater 14 DIGITAL INPUT Amplifier (Receiver) you need a multi-channel Audio/Video receiver that supports one or more of the -- DIGITAL INPUT Multi-channel sound A -- OPTICAL You will need to activate the recorder's output. (See "Audio Settings" -- COAXIAL Dolby and the double-D Laboratories. symbol are Laboratories. Digital Systems, Inc. Out" are trademarks of Digital Accessory Audio/Video Connecting jack (A/V) Connections Connecting You can watch a or Connect PAY-TV/Canal Plus Decoder VCR a to the EURO AV2 DECODER or similar EURO AV2 DECODER recording device to jack of this recorder. TV record PAY-TV/Canal Plus VCR, Cable Box, or Satellite Tuner, etc. programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder's mains lead from the mains when To watch or connecting the decoder. record PAY-TV/Canal Plus programmes, set the the the program's [Decoder On/Off] option to [On] Setup menu. See "Program Edit" (page 18). on Tip: You do not need to turn signals on the recorder to view the from the connected tuner on your TV. Note: If you disconnect the recorder's mains lead, you will not be able to view the signals from the connected decoder. Rear of the recorder Tip: TV You do not need to turn signals PAY-TV/Canal Plus Decorder SCART AV on the recorder to view the from the connected tuner on your TV. Notes: Pictures containing copy protection signals prohibit any copying cannot be recorded. If you pass the recorder may not receive a clear Be sure that signals via the VCR, you image on your TV screen. to connect your VCR to the recorder and your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV. Line VCR RECORDER input 1 TV Line input 2 When you record to a VCR from this recorder, do not switch the input source to TV by pressing the TV/DVD button on the remote. Rear of the recorder If you are using a B Sky B tuner, be sure to connect the tuner's VCR SCART jack to the EURO AV2 DECODER jack. If you disconnect the recorder's mains lead, you will not be able to view the signals from the connected VCR or tuner. 15 Connecting to the INPUT 3 or INPUT 4 Connecting Jacks Connect the input jacks (AV3, AV4) on the recorder the audio/video out jacks on your accessory component, using audio/video cables. to Note: Using a tapes Use a Digital Camcorder the front connect DV a DV panel DV IN jack, it is possible to digital camcorder and digitally transfer to DVD. DV cable (not supplied) to connect the DV in/out If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available. IN jack of your DV camcorder jack of this recorder. to the front panel DV Note: Jack This panel of Accessory Component (VCR, Camcorder, etc.) only. jack is for connection to DV It is not compatible with digital camcorder digital satellite tuners D-VHS video decks. S-VIDEO OUTPUT AUDIO OUTPUT R OR DV Digital DV IN/OUT L VIDEO OUTPUT OR Rear of the recorder Front of the recorder Front of the recorder 16 Camcorder or the Home Menu Using From the Home Menu Use v / V to select the desired 6. you can access all the Media (HDD, DISC, MEMORY CARD) for playback and recording of the recorder. setting then press ENTER to confirm your selection. Some items require additional steps. screen Press SETUP to exit the 7. Setup menu. Note: 1. Press HOME to 2. Use the v / V and ENTER buttons to select display media you want. 3. the Home Menu Options screen. to go back to the previous level. a appears. Use the v / V and ENTER buttons to select the you want. option Press b General Auto Settings SHokupand et ings Programming This recorder is equipped with a frequency synthesized tuner capable of receiving up to 88 TV channels. Preparation: Connect the recorder to the desired as 4. Connecting to the Aerial on page 11. To exit the HOME menu, press HOME. TV (HDD): recording. Returns to live TV viewing for HDD TV Returns to live TV viewing for DVD (DVD): recording. TITLE LIST: MOVIE: Displays Plays Video CD. Or MUSIC: Initial In this the Title List menu. back the movie of the Displays Displays PHOTO: Movie Music Displays (or Photo DVD-Video, settings Press B to Audio CD) 3. menu. 4. several ways to provided. Most menus consist are some Setup menu 2. Use v / V to select the desired 3. While the desired item is move to the third level. is highlighted. Use v / V to select [Start] icon is If your country is country then press B. a highlighted. not listed, select [Others] Press ENTER to begin the channel search. The tuner will automatically cycle through all available channels in the area and place them in the tuner's memory. require Note: Operation Press SETUP and the move 2. [Auto Programming] option. [Country] option of three levels to set up the options, but greater depth for the variety of settings. General Select the menu. system, there menu 1. menu. Settings customize the 1. shown in type of aerial, appears. After you have connected your recorder for the very first time. If you press SETUP for initial setting, you can only set the [Auto Programming] option. Then you can option. selected, press B set the other options. to to the second level. 4. Use v / V to select the second desired 5. Press B to move option. to the third level. 17 Program You can move, 1. Edit edit Program channel a manually (add, delete, name, etc.). Select [Program Edit] option then press B. You Edit perform a search to select and store TV channels manually. When you select [Program Edit] in step 4 above, display for setting channels appears. can the 1.Useb/Btoselecttheitemandpressv/Vto change the setting. Seek PR 07 2. Press ENTER while The Program List is selected. [Edit] menu [PR] Ch. MFT C7 0 OK indicates the selected programme position. [Seek] Searches for a channel automatically. Searching stops when the recorder tunes in a appears. channel. [Ch.] Changes [MFT] Fine picture. the channel number. tunes the channel to obtain a clearer 2. Choose OK then press ENTER to confirm the setting and returns to the Program List menu. AV1 Decoder 3. Use v / V to select a Sets the EURO AV1 AUDIO/VIDEO PR number then press encoded video ENTER. 4. Use v / V to select the program ENTER. [Program Edit] "Program Edit" option Sets the channel on the jack for inputting signals. 1. Press AV while the 2. Press ENTER to select then press Program List menu appears. See manually. right. [Station Rename] Changes the station name. The display for entering characters appears. To enter characters, see page 50. [Move] Sorts the programme positions Program List. Press v / V to move the programme position to a new location. [Delete] Disables a programme on the selected position you do Off: not need. [Decoder On/Off] Sets the channels for the decoder. You need this setting to watch or record PAY-TV/Canal Plus programmes. Press ENTER so [Decoder] appears on the display. setting. 5. Press RETURN List 18 Press ENTER menu. again to turn off the (O) repeatedly to exit Program [On] or [Off] signals from the EURO AV1 AUDIO/VIDEO jack. Normally select this. Inputs the On: The encoded video signal input from the EURO AV1 AUDIO/VIDEO jack is output to the EURO AV2 DECODER jack for decoding. The decoded signal is then input back through the EURO AV2 DECODER jack so you can record view PAY-TV/Canal Plus programmes. In this case, select [AV1] by pressing AV button. or Auto Clock Set TV When Channel auto search is Time and Date are the recorder set also set display manually. completed the actual automatically. If the time in is not correct, the clock must be Aspect Selects the aspect ratio of the connected TV (4:3 standard wide). [4:3] or Select this when TV. When you select below. connecting to a 4:3 screen [4:3], set [Display Mode] [16:9] Select this when TV TV with or a to connecting a wide-screen wide mode function. SHokupand et ings 1. Select 2. Use v / V to select [Clock set] option then press B. [Auto] option then press ENTER. Note: There are cases where the TV station does not send, sends wrong date and/or time information and the recorder sets the incorrect time. or If this happens, manually. we recommend that you set the clock Select 2. Use v / V to select Mode Selects how to when [4:3] display a is selected in [Letter Box] Displays the upper and lower a wide picture [TV Aspect]. wide portions picture of the [Pan Scan] Automatically displays Manual Clock Set 1. Display the entire [Clock set] option then press B. [Manual] option screen and cuts off the a on the screen with bands on screen. wide portions picture on that do not fit. then press ENTER. 3. Enter the necessary information for date and time. b / B (left/right): Moves the cursor to the previous or next column. v / V (up/down): Changes current cursor position. 4. the setting at the Press ENTER to confirm your setting, then press SETUP to exit the Setup menu. 19 Progressive Scan Initialization Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN or HDMI jacks, but are connecting the recorder to a standard (analog) television, set Progressive Scan to [OFF]. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN or HDMI jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to [ON]. You can reset the recorder to its original factory or Memory Card. settings and initialize the HDD [Factory Set] If you need to, you can reset the recorder to all its factory settings. Some options cannot be reset. (Rating, Password, and Area Code) [HDD format] Initializes everything recorded on the HDD (Hard Disk Drive): the HDD will be erased. [M/C format] Initializes the M/C (Memory Card): everything recorded on the Memory Card will be erased. 1. Select 2. Press v / V to select the desired [Initialize] option then press B. Note: Scan will be disable in the Progressive when the VIDEO OUTPUT switch set to RGB on setup the menu panel rear is option then press ENTER. position. The confirm message will appear. Caution 3. Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the recorder. First, the disc in the recorder. remove Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard visible picture will once again be conventional analog TV or monitor. setting, on a and a PBC PBC stands for menus some and Playback Control and refers to special navigation features that are available on Video CDs. [ON] Video CDs are played according to the PBC, if available. [OFF] CDs. 20 Video CDs are played the same way as Audio Use b / B to select [Yes] or [No] then press ENTER. Language Settings Display Select a display. Menu language for the Setup menu and on-screen Disc Menu/Audio/Subtitle [Original]Refers the disc was to the original language Sampling Frequency in which recorded. language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see page 57). If you enter the wrong language code, press CLEAR. [Other] To select another [Off](for Disc Subtitle) : Turn off Subtitle. If your receiver or amplifier is NOT capable of handling 96 kHz signals, select [48 kHz]. When this choice is 96 made, this unit will automatically convert any kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select [96 kHz]. When this choice is made, this unit will pass each type of signal through without any further processing. SHokupand et ings DRC Audio Set the recorder's of audio With the DVD Settings Each DVD disc has Dolby Digital format, you can hear a program's soundtrack in the most accurate and realistic variety of audio output options. Audio Output according to the type system you (Dynamic Range Control) a use. presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen / DTS / MPEG without losing clarity to a movie at a lower volume of sound. Set DRC to [ON] for this effect. Select "Bitstream" if you connect the recorder's DIGITAL AUDIO OUT jack to an amplifier [Bitstream]: or other equipment with a Dolby Digital, DTS or MPEG decoder. Set Vocal to DVD is MPEG): Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to two-channel PCM [PCM] (for Dolby Digital Vocal / [ON] only when a multi-channel karaoke playing. The karaoke channels on the disc will mix into normal stereo sound. audio. [Off] (for DTS): If you select "Off", the DTS signal is not output through the DIGITAL AUDIO OUT jack. 21 Lock (Parental Control) Settings Set Password Rating Some movies contain for children to view. that may not be suitable of these discs contain scenes Many parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the area. DVD video discs may or may not respond to the parental control setting if the Area code of the disc is set wrongly. Some discs offer more suitable scenes as an alternative. Ratings are area dependent. The parental control feature allows you to block access to scenes below the rating you input, thereby preventing your children from being able to view material you 1. Select 2. Follow [Set Password] option 2 then press B. shown "Rating". To change the password, select the [Change], press ENTER and input the new 4-digit code then press ENTER. Input it again to verify. To delete the password, select [Delete] then press believe is unsuitable. step as ENTER. If you forget your 4-digit code If you forget your password, to clear the password, follow the procedure below. 1. Press SETUP to display the Setup current menu. 2. Use the Number buttons to enter the 6-digit number "210499". 3. Select 1. Select 2. To [Rating] option access the features, you [Yes] password is then press B. Rating, Password and Area Code must input the 4-digit security code you created. If you have not yet entered a are prompted to do so. Input security a 4-digit then press ENTER. The 4-digit cleared. Enter a new code. Area Code Enter the code of code you code and an area to rate the DVD video press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing "Area whose standards disc, referring were to the list used (See Codes", page 57.). ENTER, press CLEAR. 3. Select [1] - and a rating using the v / V buttons. [8]: Rating one (1) has the rating eight (8) is the least most restrictions restrictive. If you select [No Limit], parental control is not active and the disc plays in full. [No Limit]: 4. Press ENTER to confirm your rating then press SETUP to exit the menu. selection, 1. 2. Follow Note: If you set the same scenes rating for the recorder, all disc scenes with rating or lower are played. Higher rated are not played unless an alternate scene is available a on the disc. 3. [Area Code] option step as shown "Rating". Select the first character 4. Shift the second is 2 then press B. using the v / V buttons. the disc. The alternative must have the rating or a lower one. If no suitable alternative found, playback stops. You must enter the 4-digit password or change the rating level in order to play same 22 Select 5. using B buttons and select character using v / V buttons. cursor Press ENTER to confirm your area code then press SETUP to exit the menu. the selection, DivX Registration Code Recording Settings DivX We provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. 1. Select 2. Press ENTER while [DivX Reg. Code] option registration [View] then press B. Record Mode Set You picture quality for recording; HQ (High Quality), SQ (Standard Quality), LQ (Low Quality), EQ (Extend Quality). can set the is selected and the code will appear. SHokupand et ings 3. Use the registration videos from Divx code to purchase or rent the VOD service at 1. Select 2. Use v / V to select SQ, LQ 3. www.divx.com/vod. Follow the instructions and download the video onto a disc for playback Note: played back on this unit. can a then press B. desired Record Mode (HQ, EQ). Aspect When DVD VOD Set] option Press ENTER to confirm your selection, then press SETUP to exit the menu. Record All the downloaded videos from DivX or Mode on this unit. be [Rec only you can set the aspect ratio to suit the material you're or recording, recording recording (16:9 4:3). 23 DV Recording Audio Disc You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; shooting. other is for Settings Disc Format If you load a completely blank initialize the disc. the disc, the recorder will DVD-R: The recorder initialize the disc to Video mode. overdubbing after On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the overdubbed sound is The used. Select "Yes" then press ENTER. DVD+RW: The recorder initialize the disc to recording mode will always be Video mode. DVD-RW: The recorder initialize the disc to VR mode. DVD+R (DL): The Initialize menu will appears. DVD+RW mode. Also, you TV Recording When TV can reformat the DVD-RW/DVD+RW from the Setup menu as below. 1. Select [Disc Format] option 2. Press ENTER while Audio recording with bilingual, you can choose audio channel to record. [Main+Sub] Main language [Main] Main language only [Sub] Sub language only and Sub language Format Disc 3. menu Use b / B to select Video [Start] then press B. is selected. appears. a desired mode (VR Mode or then press ENTER. Confirm message will appear. For 4. Auto When Chapter 24 10 minutes markers are this interval to 15 minutes. If you select switch off automatic chapter marking [None], altogether with the DVD+RWs, go Use b / B to select It takes recording in Video mode, chapter specified setting. You can change put in 5 minutes, Mode) or [None] setting. a to step 4. then press ENTER. few moments to initialize the disc. [Ok] Caution If you want to change the disc format, recorded on the disc will be erased. everything Finalize Disc Label recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing Finalizing 'fixes' the MENU/LIST or Use this to enter a name for the disc. This name appears when you load the disc and when you disc information on-screen. The disc display be up to 32 characters long. For discs formatted on a different recorder, you will see only a limited character set. TITLE. name can Caution Once you have finalized a DVD-R and DVD+R disc, you cannot edit or record anything else on that disc except DVD+RW. However, you DVD-RW disc can record and edit SHokupand et ings a by choosing [Unfinalize] option. 1. Select 2. Press ENTER while [Disc Label] option Keyboard To enter menu [Edit] then press B. is selected. appears. characters, see page 50. Disc Protect Select 1. Press ENTER while 2. Finalize Select menu When then press B. [Finalize] option [Finalize] recording in DVD+RW / +R disc formatted DVD-RW is selected. accidental appears. disc, set to recording, editing or or VR mode [ON] to prevent deleting of the disc loaded. If you need to unlock the disc to make select [OFF]. edits, then press ENTER. The recorder starts finalizing the disc. 3. [Ok] Note: How long finalization takes depends disc, how much is recorded number of titles on DVD+R DL disc can on the on the type of disc, and the the disc. take up to 30 minutes to finalize. Tips If you load already been finalized, you can 'Unfinalize' it by choosing Unfinalize from the Finalize menu. After doing this, you can a DVD-RW that has edit and re-record onto the disc. You cannot unfinalize If [Disc Protect] option not available. To a DVD-R and DVD+R disc. is set to finalize, set [ON], the finalize is [Disc Protect] option to [OFF]. 25 General Explanation On-Screen Display This manual of Displaying You loaded operating the recorder. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the recorder or gives basic instructions for is not available Displaying on can 1. Disc Information display on-screen various information about the disc on-screen. Press DISPLAY Example: once to show current status. DVD-RW in VR mode the disc. Information While Watching TV 2. Press DISPLAY again to show various information. playback During viewing the TV, press ENTER or DISPLAY to display/remove the information displayed once The items on-screen. displayed differ depending playing status. type or You can on the disc e.g., when DVD-RW in VR mode is inserted. Indicates channel number, station signal (STEREO, MONO) Indicates name, and audio received by the tuner. operational mode of the recorder. (HDD, DVD, VCD, etc.) Indicates the record mode, free space, and elapsed time progress bar. Indicates disc name 3. change and format. select or an item select the by pressing v / V and setting by pressing b / B. For details about each item, see the pages in parentheses. (or track) number/total number of titles (or tracks) (page 27) [Chapter]: Current chapter number/total number of chapters (page 27) [Time]: Elapsed playing time (page 28) [Audio]: Selected audio language (DVD VIDEO only) or audio channel (page 29) [Subtitle]: Selected subtitle (page 30) [Angle]: Selected angle/total number of angles (page 29) [Sound]: Selected sound mode (page 30) [Title]: Current title Note: Indicates current date and time. 26 If button is pressed display disappears. no for 10 seconds, the on-screen Unless stated Playback Playing a the remote control. Some features may also be available on the Setup menu. use HDD, DVD, DivX file or Video CD Playback Setup Turn the TV on Moving When and select the video input the 1. 2. source and select on button Load your chosen disc in the playback side down. tray, with the Starts menu If a The title icon. connected to the recorder. playback using disc has as more than one HOME is displayed may be displayed (see page can move to use v / V to select the Then, press the appropriate numbered (0-9) Moving title, you follows: Press DISPLAY twice then system: Turn the audio system input a to another TITLE another title source connected to the recorder. Audio otherwise, all operations described or b / B to select a title number. to another CHAPTER/TRACK 17). menu screen menu screen DVD or Video CD which contains first after loading a When a disc has a menu. another Press TITLE or view, then press ENTER want to disc has on a more than MENU/LIST to return to the more than track, you one chapter/track Press SKIP . as one chapter can move follows: > to or Press SKIP . twice menu or a to briefly during playback select the next chapter/track or to return to the beginning of the current chapter/track. Usetheb/B/v/Vbuttonstoselectthe title/chapter you start playback. title briefly to step back to to the previous chapter/track. screen. To go directly to any chapter during DVD playback, Use the number buttons to select the track you want to view. press DISPLAY twice and press v / V to select the chapter/track icon. Then, input the chapter/track Press RETURN numberoruseb/B. (O) to return to the menu screen. Menu for setting and the exact operating procedures using the menu may differ depending on the disc. Follow the instructions on You may also set PBC to menu. See page 20. screen. Setup 3. To the each Search menu under [OFF] 1. Press SCAN 2. Press SCAN stop the playback, press STOP x. The unit records the (m or M) during playback. (m required speed. or M) repeatedly stopped point, depending on the disc. "Xx" appears on the screen briefly. Press N (PLAY) to resume playback (from the scene point). If you press STOP (x) again or unload the disc ("x" appears on the screen.), the unit will clear the stopped point. 3. Press OPEN/CLOSE Playback Press OPEN/CLOSE (Z) (Z) to remove the disc. to close disc tray or HDD, DVD ; 5 steps (forward and backward) Video CD; 3 steps (forward and backward) To exit SEARCH mode, press PLAY. Still Picture and Frame-by-Frame Press PAUSE/STEP 1. (X) during playback. the picture frame-by-frame by pressing PAUSE/STEP (X) repeatedly. 2. To exit still motion press POWER (1), the disc tray closes automatically and unit turns off. Notes: to select the Advance mode, press PLAY. If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit Tip: code must be entered and/or the disc must be You authorized frame (see "Rating", DVDs may have a Region Your recorder will not play on page Code. 22). advance by pressing back up the picture frame-byb / B repeatedly during PAUSE or mode. discs that have code different from your recorder. The for this recorder is 2 (two). can region region code a The picture frame-by-frame in reverse is not available for Video CD. 27 Slow Motion Press PAUSE/STEP 1. The DVD player Use the SCAN 2. (X) during playback. will now (m or to select the A-B To a 1. go into PAUSE mode. M) Repeat required speed. 2. and 4 DVD, HDD; steps (forward backward) Video CD; 3 steps (forward only) repeat Press A-B at your chosen appears briefly on the TV To exit Slow Motion mode, press PLAY (N). again A * " screen. again at your chosen "A B" appears briefly on the TV repeat sequence begins. Press A-B " starting point. Press A-B 3. 3. sequence. end point. screen and the to cancel. Note: HDD During Random you cannot select playback, a sequence less than 5 seconds. Press RANDOM 1. The unit during playback. automatically begins Random Playback and "RANDOM" appears To return to normal 2. on the TV Time Search screen. press RANDOM until the TV screen. playback, "NORMAL" appears on To start at any chosen time search box shows By pressing SKIP > unit selects another during Random playback, the title (track) and resumes Random playback. and "0:00:00" appears. Notes: Input the start time in required works with DVD Karaoke discs Video CD with [OFF] in the Setup PBC, you menu to or Press ENTER to confirm. 4. the Random right. enter the correct numbers. must set PBC to use hours, minutes, and If you enter the wrong numbers, press b / B to move the under bar (_) to the wrong number. Then video CDs without PBC. a during playback. The time the elapsed playing time. seconds from left to only the disc: Press v / V to select the time clock icon 2. 3. This function on Press DISPLAY twice 1. Tip: On playing Playback starts from the selected time. function. See page 20. Zoom Repeat Press REPEAT to select a desired repeat mode. [Chapter] repeats the current chapter. (DVD only) [Title] repeats the current title. (DVD, HDD only) [All] repeats the all titles/tracks on the VR mode The Zoom function allows you to enlarge the video image and to move through the enlarged image. [OFF] play repeatedly. a in the Video CD with Setup page 20. menu must set PBC to to PBC, you use the Repeat [OFF] function. See or still playback x1 size → x2 size → x4 size → x1 size (normal size) 2. Usetheb/B/v/Vbuttonstomovethroughthe zoomed picture. 3. To resume normal press ZOOM playback, press CLEAR or repeatedly until the normal picture appears. Note: The 28 to Each press of the ZOOM button changes the TV screen in the sequence shown below. Note: On during playback activate the Zoom function. DVD-RW, or Video CD. [Track]: repeats the current track. (Video CD only) does not Press ZOOM 1. zoom function may not work for some DVDs. Disc Menu Marker Search HDD -RWVR DVD -RWVideo +RW -R Press MENU/LIST. 1. +R The disc VCD To 2. To enter You Marker start can points. a To enter point the TV screen from up to six memorized marker, press MARKER at the a the disc. The Marker icon appears briefly. Repeat to enter up to six on the disc menu, press MENU/LIST on Camera Angle DVD If the disc contains recorded at different scenes angles, you can change angle during playback. camera To Recall or 1. During disc search menu Clear Marked Scene a press SEARCH. The marker appears on the screen. playback, Useb/B/v/Vtoselectamarkedscenethat you want to recall or Press ENTER and marked scene remove displayed. again. markers. 3. is menu playback desired 2. DVD scene. to a different camera Press ANGLE then press b / B repeatedly playback to select a desired angle. The number of the current angle appears during on the TV screen. Tip: clear. playback starts from the Or, press CLEAR and the marked is erased from the marker search menu. The ANGLE indicator will blink scenes recorded at different is angle switching Changing on the TV angles at screen to indicate that Playbck possible. the Audio Soundtrack DVD Press AUDIO then press b / B repeatedly during playback to hear a different audio language or audio soundtrack if available. Note: Some discs feature both soundtracks. There is no Dolby Digital and DTS analog audio output when DTS is selected. To listen to the DTS connect this recorder to the Contents of DVD Checking Video Discs: Menus DVDs may contain menus that allow you to access special features. To open the disc menu, press MENU/LIST. Then, press the appropriate number buttontoselectanoption.Or,usetheb/B/v/V buttons to highlight your selection, then press ENTER. DTS decoder via -RWVR VCD DivX -RWVideo +RW -R Press AUDIO then press b / B repeatedly playback to hear a different audio channel or of the the Audio Channel HDD LEFT one See page 14 for connection details. digital outputs. Changing a soundtrack, +R during (STEREO, RIGHT). With DVD-RW discs recorded in VR mode and HDD Title Menu 1. that have both DVD you Press TITLE. If the current title has appear menu 2. The on the TV a menu, the screen. menu will main and a switch among Main by pressing AUDIO. can (L+R) a Bilingual audio channel, (L), Sub (R), or Main+sub Otherwise, the disc may not appear. menu language may contain camera angles, spoken and subtitle options, and chapters for the title. 29 3D Surround +R DVD This unit can -RWVR VCD -RWVideo +RW -R DivX produce a 3D Surround which effect, playback conventional stereo instead of the five speakers, speakers normally required channel audio from from two or to listen to multi- home theater a system. To turn off the 3D Surround 2. effect, select Subtitles DVD -R Skip +R skips recalled. Notes: -- stored in memory for use any time. This recorder does not memorize settings of a disc Settings are commencing to DivX HDD -RWVR -RWVideo +RW PIP in (Picture -RWVideo +RW Picture) -R HDD +R -RWVR DVD VCD This function enables you to view the stored stations in sub picture during playback. DVD Each press I.SKIP In HDD the last switch off the recorder. If you load a disc that had its settings memorized, the latest stop position is if you switch off the recorder before play it. Press SUBTITLE then press b / B repeatedly during playback to see the different subtitle languages. Instant user disc that you have viewed. memory even if you remove the disc from the recorder or -- [NORMAL]. DVD settings for Settings remain in automatically Press 3D SURR. then press b / B repeatedly during playback to select [3D SUR.]. 1. Memory This recorder memorizes the simulates multi-channel audio more Last Condition playback forward skips or forward 15 seconds. Timeshift or reverse mode, each press b / B 5 minutes. Note: If appears, the feature is not available Finding You on a Disc the disc. VCD any point on a video CD this function. Use this function only while a can using Locations on directly video CD is access to the playing. Playback jumps point specified. 1. Press PIP to switch Press SEARCH button during playback. The progress bar appears on the TV Use b / B to find 3. Press ENTER to confirm the selected a start position for screen. 2. Playback starts from the selected playback. position. position. This function works Input again on the sub press this to switch it off. mode selection for sub Press AV to select the picture. picture, input picture mode for the sub Each time this button is mode for the sub picture is pressed, each input displayed as shown below. Note: memorized. On and off Tuner→AV1→AV2→AV3→AV4 only when no marker is Program selection for sub picture Use v / V to change the program when sub picture's input is set to tuner. The selected program number is displayed on the TV screen. You can view the selected program by pressing STOP (x). Sub picture position change Press b / B repeatedly until desired position is achieved. The sub picture moves clockwise or counterclockwise. Zoom Sub picture Press ZOOM repeatedly to enlarge the sub picture, the magnification level increases up to three steps. 30 2. DivX Movie File Playing a The recorder can HDD, CD-R/RW DVD±R/RW discs. Before playing DivX files, read play Divx files "About DivX movie files" on on or page 32. Refer to "Disc Menu/Audio/Subtitle" If the subtitle still does not This recorder cannot play back the DivX file(s) in the Card. 1. Press HOME. 2. Select a Select media that contains DivX file(s) page 21. display properly after the press and hold SUBTITLE about 3 seconds then press b / B to select another language code during playback until the subtitle is steps 1-2 proceeded, then Movie then press ENTER. appears on the TV screen. [MOVIE] option The Movie on displayed properly. press ENTER. 3. Setup menu appears. Press SETUP b [LANGUAGE] b [Disc Subtitle] then select the language you have found. Tip: Note: Memory Press SETUP. The menu 1. menu options Press v / V to select menu Movie a folder/file on the Movie then press ENTER. menu options appear. Playbck 4. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to highlight and press ENTER. 5. If you want to view a particular file, press v / V to highlight a file and press PLAY. You can use variable playback functions. Refer to pages 27-30 6. stop the playback. The Movie appears. Notice for displaying the DivX subtitle Please refer to following notice when the DivX subtitle does not display properly. 1. Find a suitable language for the DivX subtitle on the figure below. Disc Subtitle Pressv/V/b/Btoselectanoption,andpress ENTER. [Play] Start playback the [Open] Opens the folder folder appears [Delete] Deletes the selected title. and file(s) or a list of files in the folder(s) from the media. Press STOP to menu 2. Language (HDD only) [Rename] Edits the file name. (HDD only) (page 38) [Move] Moves the file(s) to another folder or media. (HDD only) (page 39) [Copy] Copies the file(s) to another folder or media. (page 39) Available DivX Subtitle Original, English English French, German, Italian, Spanish, French, German, Italian, Spanish, Portuguese Portuguese Dutch, Swedish Russian Russian Other 6976 Greek Other 7665 Polish, Hungarian, Czech 31 About DivX movie files DivX disc compatibility limited follows: as with this recorder is Available resolution size of the DivX file is under 720x576 (W x This recorder the Memory The file H) pixel. cannot play back the DivX file(s) in Card. name of the DivX subtitle is limited to characters. The total number of files and folders on the disc should be less than 1999. If the number of the screen frame is over 29.97 frames per second, this unit may not operate normally. If the video and audio structure of recorded file is not interleaved, returns to the If the file is recorded with menu screen. GMC, the unit supports only 1-point of the record level. * GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 DivX or Xvid, have this option. There are called 1-point, 2-point, Playable encoders, like different levels of GMC or 3-point encoding, usually GMC. DivX file ".avi", ".divx" Playable DivX subtitle ".smi", ".srt", ".sub ".txt (Micro DVD format only)", (Micro DVD format only)" Divx subtitle except those listed above is displayed the TV Playable on not screen. Codec format "DIV3", "MP43", "DIVX", "XVID", "DX50" Playable Audio format "AC3", "PCM", "MP2", "MP3", "WMA" within 8 48 kHz (MP3), Sampling frequency: 32 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32 192kbps (WMA) - - - 32 - within Playing an Audio CD MP3/WMA or file Audio CD and Music 1. The recorder or audio CDs and MP3/WMA files play can HDD, Memory Card, CD-ROM, DVD±R/RW or CD-R/RW discs. Before playing MP3/WMA files, read on Music The on "About MP3/WMA audio files" Press v / V to select menu folder/file the Audio CD on then press ENTER. options menu a options menu appear. page 34. Press HOME. 1. The HOME Select 2. a menu appears. media that contains MP3/WMA or audio title then press ENTER. Select 3. then press ENTER. Music menu appears on the TV [MUSIC] option The Audio CD or screen. 2. Pressv/V/b/Btoselectanoption,andpress ENTER. [Play] Start the selected title. playback the folder and [Open] Opens list of files in the a Playbck folder appears Deletes the [Delete] Audio CD Menu Use v/V to select 4. a [Rename] Music Menu track then press N (PLAY). Playback starts. During playback, the current track's elapsed playing time will appear on the front panel display and menu. Playback will stop at the end of the Press DISPLAY to view ID3-Tag the MP3 file. If information is not ID3-Tag information for present, "Not Checked" will appear. If you select a folder, the number of subfolders and number of MP3/WMA files in the folder Press DISPLAY information again to are remove displayed. move to the upper directory, use and press ENTER. highlight You can also display HOME menu to select another media by pressing RETURN (O). To at any stop playback time, press STOP. Tip: You on can create new the Music-HDD folder. Select or file(s) to another folder or (page 39) [Copy] Copies the file(s) media. (page 39) to another folder or Adds the track(s) to Program List. Pause 1. Press PAUSE/STEP 2. To return to (X) during playback. playback, press PAUSE/STEP (X) again. N (PLAY) or press to Another Track Moving the v / V to 5. media. (page 38) name. the screen. If you want to Moves the [Program Add] (page 35) disc. Tips: Edits the file [Move] from the media. file(s) [New Album] option Music-Memory Card menu then Press SKIP . or > briefly during playback to go to the next track beginning of the current track. or Press SKIP . twice step back previous On briefly to to return to the to the track. Audio CD, to go directly the track number using the numbered buttons an to any track, enter (0-9) during playback. press ENTER. "NONAME##" folder is created. 33 Repeat Audio CDs Track/All/Off Repeat - Press REPEAT to select a desired repeat mode. Repeat A-B To a repeat TRACK: OFF does not (No display): sequence in play repeatedly. The Track/Folder/Off Repeat - Press REPEAT to select a desired again at your Repeat icon and 'A repeat mode. TRACK: OFF does not (No display): The current folder. during playback or in stop mode. automatically begins Random Playback and "RANDOM" appears 2. on the menu screen. repeatedly until playback, press RANDOM "RANDOM" disappears from the menu screen. during Random playback, unit selects another track and resumes Random Repeat icon MP3 / WMA file limited as from the disappears play, menu SKIP > Sampling frequency: 32 48kHz (WMA) Bit rate: within 8 within 8 32 - the a a 3D Surround simulates multi-channel audio CD-R effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from home theater a Press 3D SURR. or system. during playback within physical to select effect, press 3D disappears from the ".mp3" / ".wma". format should be "ISO 9660" and physical format (UDF Bridge format)". should be "ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible File To turn off the 3D Surround MP3/WMA file that has an to playback MP3 / WMA files. We recommend that you use Easy-CD creates an ISO 9660 file system. [3D SUR]. SURR. until "3D SUR" (MP3), - file extension other than DVD±R/RW produce 48 kHz - 320kbps (MP3), 192kbps (WMA) 3D Surround can with this recorder is compatibility follows: "JOLIET". 2. menu screen. playback. 1. the repeat sequence begins. The recorder cannot read Tip: This unit on - To return to normal By pressing B' appears - About MP3/WMA audio files Press RANDOM The unit point. play repeatedly. Random 1. chosen end screen. To exit the sequence and return to normal press A-B again. 3. repeats the current track. FOLDER: repeats the all tracks in the track: Press A-B 2. screen, and the MP3/WMA a Press A-B at your chosen start point. Repeat icon and 'A' appears on the menu 1. repeats the current track. ALL: repeats the all tracks on the disc. (Audio CD only) names must incorporate They should not contain menu screen. should have an maximum of 8 letters and a .mp3 Creator, which or .wma special extension. letters such as / ? *:"<>letc. Changing the Audio Channel Press AUDIO channel repeatedly to hear (stereo, left or right). a The total number of files and folders different audio on the disc should be less than 1999. This recorder requires discs and recordings to meet certain technical standards in order to achieve Search 1. (Audio CD only) Press SCAN (m The recorder will Press SCAN or playback quality. M) during playback. now go into SEARCH mode. 2. (m or M) repeatedly required speed (3 steps). 3. To exit SEARCH to select the mode, press N (PLAY). Pre-recorded DVDs set to these standards. There are optimal automatically many different types of recordable disc formats (including CD-R containing MP3 or WMA files) existing conditions playback. are and these require certain pre(see above) to ensure compatible Customers should note that required permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always 34 be sought from the copyright owner. with Audio Program Playback CD and MP3/WMA file 1. contain up to 99 Audio CD tracks MP3/WMA files. 1. Use v / V to select a Audio CD menu. You by pressing Press v / V to select a track/file on the Program 256 or (or folder) select all files and folders can menu Music or track/file options menu List then press ENTER. The menu options appear. Program Playback enables you to make custom playlists of Audio CD or MP3/WMA tracks. Programs can List Program on on the the Music CLEAR button. To cancel the selections, press CLEAR again. Selecting multiple 1. files/tracks (folders) Press MARKER. 2. A check mark appears on the file/track or folder. Press MARKER again to cancel the marked file/track 2. Repeat step (folders). or Use v / V to select [Play] Playback begins in the order in which you programmed the tracks from the selected track. folder. 1 to mark additional file/track options appear on Use v / V to select the the left side of the menu. [Program Add] option [Save] Repeat steps 1-3 to mark additional tracks. a to the Program The programmed track you highlighted on the program selected last is (HDD only) Tracks Repeat mode. Track from the Program List tracks. Press ENTER. The 3. Select options menu [Delete] option appears then press ENTER. Track Order in the Program List Select the track you wish to move on the Program List. Use MARKER button to select multiple tracks. Use v / V to select the track you want to start 2. Press ENTER. The playing. 3. Press N (PLAY) list. 4. to start. after playing the last To exit and Program Playback playback, select a track on (PLAY). resume appears Select [Move] option then press ENTER. Use v / V to move the yellow bar to the desired Save Your normal the List and press N you have Select The can access or remove pressing MENU/LIST. the Program List screen by Program List (HDD only) This recorder memorizes the 1. Tip: options menu location, then press ENTER. programmed track in the program list. You Playbck the 1. Playback stops 8. change Memorizes the program list. 2. Changing list. to Select the track you wish to erase from the Program List. Use MARKER button to select multiple 7. Program [TRACK] Repeats the current track. [ALL] Repeats all tracks on the Program List. [OFF] Cancels Repeat mode (no display). 1. move track(s) Press REPEAT to select the desired Erasing Use B to Moves the Repeat Programmed If you select a folder for Programmed Playback, all tracks/files in the folder are added to the Program List. 6. from the program order. then Note: 5. track(s) menu. [Move] press ENTER. 4. Deletes the [Delete] Press ENTER. The 3. then press ENTER to confirm your selection. List 2. option an 2. user program list that programmed. a track menu on the options Program List. appear. Select The [Save] option then press ENTER. Program List is saved in the HDD's PROGRAM folder. 35 Viewing The recorder can JPEG files play DVD±R/RW, HDD, JPEG Photo JPEG File a recordings, or on the CD-R/RW, Card. Before Memory read "About JPEG image on pressing Press HOME. The HOME 2. Select a appears. Select media that contains JPEG file then press 1. menu then press ENTER. appears on the TV screen. Program the on List menu by selections, files (folders) Press MARKER. or 2. 4. the A check mark appears on the file or folder. Press MARKER again to cancel the marked file [PHOTO] option The Photo on again. Selecting multiple ENTER. 3. file CLEAR button. To cancel the press CLEAR menu a then press ENTER. The menu options appear. You can select all files and folders page 37. 1. Press v / V to select 1. playing files" options menu folder. Repeat step 1 to mark additional file (folders). Useb/B/v/Vtoselectafolder,thenpress ENTER. The menu options appear on the left side of the 5. 6. Select Use v / V to select 2. menu. [Open] option [Open] Opens [Full Screen] ENTER. options appear on the left side of the If you want to move to the upper directory, use and press ENTER. highlight You can also display HOME menu to select media by pressing RETURN (O). Use v / V to select [Full Screen] image stop viewing The Photo is another at any menu displayed full file from the media. Slide Show menu. [Move] Moves the file(s) to another folder (album) or media. (page 39) (HDD, Memory Card only) then press in full as [Rename] Edits the file name. (page 38) (HDD, Memory Card only) ENTER. The selected list of files in the Shows the selected file [Slide Show] Displays the v / V to To a [Delete] Deletes the selected (HDD, Memory Card only) Tips: 8. the folder and screen. menu. 7. then press ENTER folder appears Useb/B/v/Vtoselectafile,thenpress menu option to confirm your selection. then press ENTER. A list of files in the selected folder appears. The an [Copy] Copies the file(s) media. (page 39) screen. time, press STOP. to another folder or Tip: appears. You can create Card. Select new folder in the HDD [New Album] option or Memory then press ENTER. "NONAME##" folder is created. Skip Images While once Press ENTER to appear or disappear this menu. press SKIP (.or >) to advance to the next file or return to the viewing a previous file. Rotate Images Use v / V while clockwise 36 picture, or viewing a picture counterclockwise. to flip the picture 5. View Slide Shows Press MARKER to select Select 1. Select [Slide Show] option on the Photo menu (Refer to "Photo menu options" on page 36). press ENTER. Select [Deselect 2. Press ENTER. The Slide Show menu multiple files. [Select All] option to select all tracks All] option then to deselect all selected tracks then press ENTER. Select [Cancel] option to exit this menu then appears. press ENTER. 6. Use b / B / v / V to highlight [Start] option then press ENTER. 3.Useb/B/v/Vtosettheoptions. [Object] option: [Selected] Views slide show only selected files. Use the MARKER button to select [All] multiple files. Views slide show all files. Playbck [Speed] option: Sets the Slide Show speed to [Slow], [Normal], or [Fast]. 7. 4. Select the [Start] option then press ENTER to start Press STOP to the Photo stop the Slide Show and return to menu. the Slide Show. 5. Press STOP to the Photo stop the Slide Show and returns to About JPEG menu. JPEG disc limited To Pause the Slide Show 1. Press PAUSE/STEP (X) to pause slide show. 2. When you want to continue slide N show, press files while MP3/WMA music files recorded listening on to HDD. 1. Select [Slide Show] option on the Photo menu (Refer to "Photo menu options" on page 36). 2. Press ENTER. The Slide Show 3. Select [Simultaneous Slide Show upon the size and number of JPEG files, it could take a long time for the recorder to read the appears. Music see an on-screen display after of the files may be too large reduce the resolution of the JPEG files to less some pixels. The total number of files and folders on the disc should be less than 1999. Some discs may be incompatible due to recording format or the condition of disc. a different Ensure that all the selected files have the extensions when menu with this recorder is follows: as than 4M display photo files Depending --- simultaneously can compatibility files. If you don't several minutes, (PLAY). To listen to music while slide show You image copying into the CD ".jpg" layout. If the files have play] option menu on the rename File them ".jpe" or ".jpeg" extensions, please as ".jpg" file. without names ".jpg" extension will not be able to be read by this recorder. Even shown as JPEG are image though the files files in Windows Explorer. 4. Progressive and lossless files supported. are not compression JPEG image Press ENTER. Simultaneous Music play menu appears. 37 Editing DivX MP3/WMA, JPEG, a Naming You These descriptions are MP3 file's operation for example, other kind's files are operated same way. cannot be The DivX can erase folder(s) 1. on Select You a can pressing MP3/WMA, JPEG the HDD or HDD or Memory or DivX 3. 38 3. menu options Select [Edit] option then options appears. on Memory be up to 32 rename on appear or the the menu. menu. press ENTER. again. Repeat step Select Press ENTER. The file you wish to can the HDD by files (folders) 4. folder. menu 2. a Names on selections, 1 to mark additional file (folders). Press ENTER. The Memory file(s)/ A check mark appears on the file or folder. Press MARKER again to cancel the marked file 2. Select Edit Press MARKER. 2. or Card. CLEAR button. To cancel the Selecting multiple or the HDD MP3/WMA files 1. from the HDD file you wish to erase on the menu. select all files and folders on the menu press CLEAR 1. the disc on independently. characters long. copied or moved to Memory Card. file(s) in the memory card is not available. Erasing a file(s)/folder(s) or Memory Card You on can name Card Notes: MP3/WMA, and DivX files file Card file The a options appear [Delete] option The selected file(s) is Memory Card. on the menu. then press ENTER. deleted from HDD or Select [Rename] option then Keyboard menu appears. To enter characters, see press ENTER. page 50. Copying a to another media or file(s) Moving folder You You can copy to another media file(s)/folder(s) a Select You can pressing CLEAR button. To cancel the press CLEAR 1. by 1. Follow 2. Press ENTER. selections, again. The 3. Selecting multiple file(s)/folder(s) to another media or moving, the file(s)/folder(s) are deleted from the current location. file you wish to copy on the menu. select all files and folders on the menu a file(s) can move a folder. After or folder. 1. a files (folders) options Select Move 1-3 steps as appear [Move] option menu shown left. on the left side of the menu. then press ENTER. will appear. Press MARKER. A check mark appears on the file or folder. Press MARKER again to cancel the marked file folder. or 2. 2. Repeat step menu options appear Select Edit 4. (folders). Press ENTER. The 3. 1 to mark additional file [Edit] option then options appears. Select Copy [Copy] option menu on the menu. Playbck press ENTER. 4. then press ENTER. You 1. appears. a album (folder) to move. After The 2. select can selecting a media then press album (folder) list appears. Select a ENTER. folder. Also, you can create [New Album] option new on album the Move (folder). menu Select then press ENTER. "NONAME##" folder is created. 5. 5. You 1. a album (folder) selecting a media then press album (folder) list appears. Select a [Move] option moving. then press ENTER to begin to copy. After The 2. select can Select ENTER. folder. Also, you can create [New Album] option new on album the Copy (folder). menu Select then press ENTER. "NONAME##" folder is created. 6. Select [Copy] option copying. then press ENTER to begin 39 Note: Recording About DVD The maximum number of titles that on can the HDD is 255. the HDD allows you to record 12 hours continuously. Using recording be recorded a maximum of Notes: This recorder cannot make recordings on CD-R or CD-RW discs. The Our company takes failure due to power no responsibility for recording outages, defective discs, Please take proper Disc types and and settings discs: care or of your discs. recording formats, modes, play five different kinds of DVD pre-recorded DVD-Video discs, DVD-RW, can DVD-R, DVD+RW and DVD+R discs. The disc format for DVD-R, DVD+R, DVD+RW discs is always "Video format"---the This means same as that once DVD-R, DVD+R, or pre-recorded DVD-Video discs. finalized, you can DVD+RW in a play a regular DVD player. By default, the DVD-RW disc format is Video Recording (VR) format, though you can change this to Video format, if required. (Reinitializing the disc will erase the contents of the disc.) The recording mode is closely related to the disc format. If the disc format is Video Recording format, then the recording mode is VR mode; if the disc format is Video mode, then the recording mode is Video mode (except for DVD-Video, which is not recordable, and so does not have a recording mode). Within the recording modes (which are fixed for them whole disc) are the record settings. These can be changed as required for each recording and determine the picture quality and how much space the recording will take up on the disc. About HDD recording Recording to the internal hard disk drive (HDD) is basically similar to recording to a VR mode DVD-RW disc. You have the full choice of recording quality options, including the manual mode, and of course you can record, erase and re-record many times of the hard disk drive means as as you like. The capacity that you can store many hours of video on it, even in the higher quality recording modes. To help you the contents, the HDD is divided into ten genre. You can name and use these genres as you like---for example, you might have a genre for movies, organize another for TV recordings. 40 shows, and one for camcorder recording recording the recorder damage to the Recorder. Fingerprints and small scratches on a disc can affect playback and/or recording performance. This recorder Notes for times shown uses are not exact because variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter. If you record still pictures or audio only, the recording time may be longer. The displayed times for recording and time remaining may not always add up to exactly the length of the disc. The recording time available may decrease if you heavily edit a disc. If using a DVD-RW disc, make sure you change the recording format (Video mode or VR mode) before you record anything on the disc. See page 24 (Disc Format) for how to do this. When using a DVD-R or DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before you start a recording session, check the amount of recording time left on the disc. When using a DVD-RW disc in Video mode, recording time available will only increase if you erase the last title recorded The Delete Title on the disc. in the Title List option (Original) menu only hides the title, it does not actually erase the title from the disc and increase the recording time available (except for the last recorded title on a DVD-RW disc in Video mode). Overwrite recording is available using DVD+RW discs. When using a DVD+R/RW, the recorder will execute the Menu-making operation to update the new title and editing when removing the disc from the recorder. So you must remove the disc after selecting the recorder's operation mode to DISC mode. Recording There are four time and picture quality preset recording quality modes: Highest quality setting, gives about 1 hour of recording time on a DVD (4.7GB). Default quality, sufficient for most applications, SQ gives about 2 hours of recording time on a DVD (4.7GB). LQ Slightly lower video quality, gives about 4 hour of recording time on a DVD disc (4.7GB). Lowest video quality, gives about 6 hour of EQ recording time on a DVD (4.7GB). HQ -- -- -- -- Timeshift Do not miss Clip HDD a scene from live broadcast. If the a You telephone rings while you are watching your favorite live broadcast, just press "TIMESHIFT" and "PAUSE" before answering the phone. The timeshift function will viewing. After the phone "PLAY" call or viewing interruption, 2. Press REC at the press use starting point of the section you want to record. Progress Progress of the edit is indicated in red on the Bar. HDD 3. store a program in the HDD storage cache temporarily. 4. Press TIMESHIFT while The During Timeshift, on (Pause, Live TV/Playback) Operation can to store the program pause step, search and slow-motion to find the starting point. "SCAN" to watch the program. Press "STOP" to return to the live broadcast. You during Timeshift (Hard Disk Drive). 1. or Timeshift HDD edit can the HDD be activated and the broadcast is then recorded for later Record Progress shown below. watching a Bar to timeshift step, search and slow-motion to find point. Press REC at the ending point of the section you want to record. TV program. the screen as display appears on The Progress Bar changes Use pause the ending Normal 5. playback 1 and 4 to make several Repeat steps Records of icon after 5 seconds. a continues. Recording Clip program. 12 6. Press STOP to stop Timeshift. Confirm message will appear. 34 Indicates 1. 5 playback mode. position. 4. Indicates Timeshift 5. Indicates the time that is elapsed Selected sections time. one hour from Timeshift during on the screen. recorded are on the HDD. the program may not be recorded on the HDD. Clip records cannot be made for sections lasting Tips: can use displayed Or, If you want to stop Clip recording, press the STOP button. If you press POWER to stop Clip recording, start time. You then press ENTER. [Yes] Notes: Indicates Timeshift start time. 3. Use b / B to select press STOP again. The current broadcast is Indicates current Timeshift 2. 7. trick play less than 5 seconds. functions timeshift. Refer to pages 27-30. You can edit the cached (Slow, Scan, etc.) Playback Operation on clip during Timeshift to retain the program on the HDD. Refer to Record on the right. Jump 1. Clip to Start or End Press ENTER during during Timeshift timeshift. The will menu appear. 2. Press b and beginning Notes: starts from the very of the timeshift. Press B and There is not free space on the HDD, the oldest timeshift section of the cache will be incrementally playback jumps to the very end of the timeshift then goes to pause mode. deleted. If button is pressed stop automatically. no for 6 hours, the Timeshift will Marker Search in Timeshift mode You can mark at the desired one in Timeshift mode. Press MARKER point during To Exit the Timeshift 1. Press STOP to exit Timeshift function. 2. Confirm message will appear. Use b / B to select [Yes] then press ENTER. The current broadcast is displayed on the screen. Timeshift. Press SEARCH to recall the marked scene. 41 Basic from Recording a Follow the instructions below to record Recording starts disc is full or To Pause the TV TV program. and continues until the a 1. Press PAUSE/STEP 2. When you want to continue PAUSE/STEP (X). immediately you stop the recording. To record Note: You must load recordable disc for DVD a recording. watching The HOME Select 2. a menu media appears. (HDD or DISC) Select [TV (HDD)] or [TV (DVD)] option that the TV Press TV/DVD to select the TV mode 2. recording. The TV indicator appears. Using the TV, select the channel to be then press viewed. input is set to this 1. recording mode as necessary by pressing MODE repeatedly. (HQ, SQ, LQ, EQ) Recording Recording allows you to make a recording easily of a preset length without using If you load a completely blank disc, the recorder takes a short while to initialize the disc. a during Instant Timer recorder. REC Follow steps from TV). a Press REC 2. time 1-4 as shown left (z) repeatedly the (Basic Recording to select the recording length. Use v / V buttons to select the TV channel to 5. TV program while another program timer. Set 4. sure recording. recording, press one Instant Timer ENTER. Also make to pause to record TV program then press ENTER. 3. (X) 1. Press HOME. 1. Recording record. Changing TV Audio Channel You select the audio channel (language) to by pressing AUDIO during viewing TV program. current audio channel is displayed on-screen. can Stereo or mono Stereo → → The broadcast: → Right → Mono broadcast: Bilingual Main Left listen Sub Main+Sub → For TV recording with bilingual, set audio channel from the [TV Rec Audio] in sub-menu of the Setup menu (see page 24). Checking If the sound is of poor quality when set to Stereo, you can often improve it by changing to Mono (Left screen or 6. Right). Press REC (z) REC indicator lights Timer once recalled will a fixed Recording Press STOP (z) setting for a to check the automatically recording time. The return to the TV moment. Also, remaining time of recording is shown in the window. (x) to on length right. in To Extend the Recording Time of time, stop recording. see (x) Instant recording time can be extended anytime by pressing REC (z). Each subsequent press increases the recording within free space (maximum 240 minutes). time Caution If the recorder is failure) while the will be lost. 42 Time The continues until you press STOP the disc or HDD is full. To record for Recording once. Recording or the Press REC display Recording will start. (The the display window.) 7. Recording starts after the first press. Each subsequent press increases the recording time within free space (maximum 240 minutes). The recording time is displayed on the TV screen. At the end of the recording, the recorder will stop recording and shut off. unplugged (or there is a power recorder is recording, the recording Timer 3. Recording This recorder can be record up to 16 For unattended programmed to period of 1 month. programs within a recording, the timer needs to know the channels to be recorded, the and starting ending use a 4. ENTER, the program will be memorized by To check the recording, the Timer Record List programming, will appear. Check field's "Rec. OK" you must format the disc before starting timer recording. (Refer to "Disc Format" on page 24.) 1. Press the recorder. time. blank disc for timer completely recording mode as necessary by pressing MODE repeatedly. (HQ, SQ, LQ, EQ) a REC Note: If you Set indicates that the timer on the Timer Record List recording is programmed correctly. 5. Press RETURN 6. Make (O) to exit the Program List. Press TIMER REC. The Timer Record menu will appear. that you load a recordable disc for DVD and press POWER to switch your unit to sure recording Standby. Notes: The timer indicator when the recorder lights in the display window is in standby with the timer active. [Media] DVD). [PR] one Choose Choose media to record a (HDD For TV recording with bilingual, set audio channel from the [TV Rec Audio] in sub-menu of the Setup menu (see page 24). or memorized program number, or of the external inputs from which to record. [Date] a Choose [Start Time] [End Time] You must press POWER to stop the timer recording. If you set a timer recording to record to DVD but date up to 1 month in advance. a there isn't Set the start time. [Repeat] Daily (Monday - a desired Friday), or recording, the Recovery Recording feature will automatically record the program to the HDD for repeat (Once, Weekly). of the program you want to record. Note that VPS/PDC may not work with every station. Notes: use VPS/PDC include typically VPS/PDC information in the teletext TV guide Simultaneous When is not recorded. 2. recording for both DVD and built in hard (HDD) are completely independent. For disk drive you can record to either the DVD or HDD and play back video from the other source at the example, source same time. 1. Start 2. Press HOME to 3. Usethev/V/b/BandENTERbuttonsto recording. select a display different media the Home Menu type that you screen. want to play back. Start The Playback. recording will continue while playing back the media from the other mode. Enter the necessary information for your timer recording(s). b / B and and Playback 4. program recording playback pages. Please refer to these pages when setting a timer recording. using VPS/PDC, there may be instances where the beginning of the Recording you. [VPS/PDC] The VPS/PDC system automatically adjusts the recording time so that even if a program is not running to schedule, you won't miss it. For VPS/PDC to work properly, you must input the correct announced time and date Stations that recordable DVD loaded at the time of the Set the end time. Choose a (left/right) move the cursor left/right v / V (up/down) change the setting at the current cursor position Press RETURN (O) to exit the Timer Record -- -- Notes: You can't use simultaneous recording while playback and copying. You cannot edit programs recording and playback. during simultaneous menu. Press ENTER after filling in all the program information. Press TIMER REC to display Timer Record List. 43 Checking Timer If two timer programs overlap: The earlier program takes priority. Recording Details When the earlier program Programming is turned or more can program starts. If two programs be checked whenever the recorder Press TIMER REC twice. on. Use v / V to select a timer finishes, the later exactly the takes priority. set to start at are time, the program entered first recording. If the disc is damaged, complete successfully. Press ENTER to edit the selected program. Timer Record menu appears. the In this Check field shows "Rec. a can record from camcorder Make the not be. Components component, such as to any of the inputs. that the sure external an though External VCR, connected or recorder's external 1. an from External Recording You from may not case even OK", it may Press CLEAR to delete the selected program from the Timer Record List. Recording Input recording same from is connected component you properly want to record to the recorder. See page 15-16. Canceling You can a clear Timer a timer 2. Recording Choose HOME setting anytime before the 3. recording actually starts. Usev/Vtoselectaprogramyouwanttoeraseon the Timer Recorder List. If you want to program, press CLEAR. erase a media menu. Press AV (HDD or DVD) (see page 17). repeatedly to record to select the external After a Timer a timer Recording recording has in the AV1: EURO AV1 AUDIO VIDEO mounted Progress started, you Even panel back on (VIDEO, AUDIO (L/R), IN) mounted on front panel DV: DV IN mounted on front panel the timer is set, the recorder will not 4. disc loaded and there is not free space the HDD. 5. the HDD. [Disc Protect] option menu [ON] and there is not free space page 25). Power is turned There is set to in the on (see (z) as necessary by repeatedly. (HQ, SQ, LQ, REC indicator lights continues until you press STOP the disc is full. To record for Timer on. a timer program when: recording is already underway. The time you're trying to set has already passed. There are already 16 timer programs set. 6. a fixed Recording" Press STOP on length of time, see in (x) "Instant page 42. (x) to stop recording. Note: If your source is copy-protected using CopyGuard, you will not be able to record it using this recorder. See Copyright on or once. are You cannot enter 44 or on S-VIDEO Recording already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R, DVD+RW) recorded on the disc and there are already 255 titles recorded on the HDD. A mode REC MODE Press REC Setup the HDD. recording Recording will start. (The the display window.) A non-recordable disc is loaded and there is not on Select the pressing EQ) no free space back panel AV4: INPUT 4 record when: There is on AV3: AUDIO IN 3 / VIDEO IN 3 mounted still Recording Troubleshooting though on panel cancel the program. Press POWER. Timer to Tuner: Built-in tuner back can input record from. AV2: EURO A/V2 DECODER mounted Stopping using page 53 for more details. from DV Recording Before DV You Input dubbing DV-equipped camcorder to this recorder using a single DV cable for input and output of audio, video, data and control signals. This recorder is only compatible with DV-format (DVC-SD, DV25) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible. can connect Make your digital camcorder is connected to the front panel DV IN jack. See page 16. 2. Select than more one 3. 16-bit/48kHz, or You DV is input choose between Audio 1 can and Audio 2 Input require. (original audio) as you (overdubbed audio). is set from the sub-menu of the Setup Audio" on [DV Rec menu. Audio] in See "DV page 24 for more information. 4. record one repeatedly to select the DV input. appears in the display window and on the TV screen. 5. Find the place on the the recording camcorder want to to start from. For best results, pause playback tape that you at the point from which you want to record. stereo only audio track. Set [DV Rec Audio] option to [Audio 1] or [Audio 2] as required (see page 24). Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz). Picture disturbance on the recording may occur if the source component pauses playback or plays an can Press AV DV twin stereo tracks of 12- bit/32kHz. This recorder your camcorder, you can use this recorder's remote to control the camcorder Depending using 6. the Press REC on STOP, PLAY and PAUSE functions. (z) once to start recording. automatically stopped if the recorder detects no signal. You can pause or stop the recording by pressing PAUSE/STEP (X) or STOP (x). Recording unrecorded section of source then menu Recording equipment connected via the DV IN jack (including two recorders). It may not always be possible to control the connected camcorder via the DV IN jack. Digital camcorders can usually record audio as the [TV(DVD] option on the press ENTER. (see page 17). or Check that the DV audio DV camcorder You cannot control this recorder from external stereo [TV(HDD)] HOME time to this recorder. a sure a You cannot connect at 1. tape, or if the power fails in component, or the DV cable becomes disconnected. is You cannot control the camcorder from this from Recording You can record from the DV IN jack on a a the Digital remote control Camcorder In Video digital camcorder connected front panel of this recorder. the recorder's remote, you camcorder and this recorder. Using recording, make sure DV IN jack is set up (see can to that the audio the page input source signal using this switched operating. sure You cannot control this unit to on and in for properly a while on this camcorder must also be remotely from the DV IN jack. through the the DV cable is Try switching If you connect a second recorder using a DV you cannot control the second DVD from this cable, switch back one. Try switching off the properly connected. connected equipment then on. the audio input. a You cannot record date and time information from DV cassette. to work Make recorder's remote. component connected recording recorder, the digital If you cannot get a picture and/or audio DV IN jack, check the bullet points: must be DVC-SD format. Some camcorders cannot be controlled on screen Troubleshooting Tips: The For timer for 24). mode, the final frame of the recording may remain displayed after recording stops. control both the Before during recording. Note: a Depending on the connected be able to control it using camcorder, you may the remote control not supplied with this recorder. 45 Title List and Chapter List Menu 123 45 67 Overview Using the Title List menu you can edit video content. The editing features available in the Title List menu depend on whether you are editing video on DVD, or the HDD, and whether you're editing Original content, or a Playlist. There You two ways to edit VR mode DVD-RW discs. directly edit the Original content of the disc, are can you can create and edit a Playlist. The Playlist doesn't actually change any of the content on the disc, but just controls how the content is played back. or Editing material recorded on the HDD is similar to editing the Original content of a VR mode DVD-RW, with similar commands for erasing and naming titles, as well as fine control over the content of chapters 1. within titles for DVD disc. Note: if you display the Title List menu for of the titles may appear with a mark. During recording, the HDD, some These titles were recorded with different to the current During recording, 1. setting a Line Input setting of the recorder. these titles cannot be played. Press MENU/LIST to Playback You should be also using HOME menu, [TITLE LIST] option then press ENTER. can select display the Title List menu. stopped when you do this. access it When selecting titles, use the v / V buttons to display the previous/next page if there are more than six titles. If you are editing a VR mode disc, press MENU/LIST to switch between Original and Playlist menu. On the left side of the The main part of the screen are screen the menu options. shows thumbnails of the titles (or chapter) on the DVD or HDD. You can change these thumbnails using the THUMBNAIL button---see Changing Title Thumbnails on page 47. Press DISPLAY to title on display the Title List the information of selected menu. After selecting a title or chapter on the Title List or Chapter List menu, then press ENTER. The menu options appears on the left side of the menu. Use v V to select a option then press ENTER to confirm To exit the Title List menu, press RETURN repeatedly. options: To display menu option, select a title or chapter then press ENTER. The options displayed differ depending on the disc type. [Chapter] Displays Chapter List of the title. [Combine] Combines two titles or chapters into one (page 51). [Delete] Deletes the title or chapter. (page 49) [Delete Part] Deletes a part of the Title (page 49). [Divide] Divides a title into two (page 51). [Dubbing] Copies the title to another media. (page 54) [Full Play] Starts playback of the selected title including the hidden chapters. [Hide (Show)] Hides (or Shows) the selected title or chapter. (page 52) [Move] Moves a chapter on the Chapter ListPlaylist menu to a position on the menu. (page 52) [Play] Start playback of the selected title or chapter. The hidden titles and chapters on the DVD+R/RW cannot be play back. [Playlist Add] Adds the title or chapter to the Playlist. (page 48) [Protect] Protects accidental recording, editing or deleting of the title. (page 52) [Rename (Title Name)] Edits the title name. (page 50) [Sort] Lists the programs on the Title List menu by Date, Title, or Category. (page 50) [Title] Displays Title List of the chapter. [Undo]/[Redo] Un-do/Re-do action. (page 50) / 2. your selection. 2. Menu Indicates the record elapsed (O) the last deletion/ mode, free space, and time progress bar. 3. Current media 4. Currently 5. Thumbnail 6. Shows the selected title number and total number selected title. of titles. 7. Shows the title name, recorded recording length. 46 date, and HDD, VR Mode: Original and Adding Chapter Playlist Editing -RWVR You Titles, Chapters and Parts Titles in the disc's content contain original can chapter create chapters chapters. When you insert a disc's title into the Playlist, all the chapters within that title also appear. In words, chapters in the Playlist behave exactly as chapters on a DVD-Video disc do. Parts are sections of Original or Playlist titles. From the Original and Playlist menu you can add or delete parts. Adding a chapter or title to the Playlist creates a new title made up of a section (ie., chapter) of an Original title. Deleting a part removes part of a title from the Original or Playlist menu. editing using the within marks at the desired a start and end frames may not be set in the start and end point display. exactly as During Playlist playback, you may notice a momentary pause between edits. This is not malfunction. DVD like a editing a a video During recording want to start A chapter or a new playing back, at the point chapter, press CHP ADD. marker icon appears Changing on the edits. With DVD, you edit by making a 'Playlist' of and when to play it. On playback, the play Recorder plays About word the disc according 'Original' and to the Playlist. 'Playlist' -RWVR the TV -RWVR Each title screen. +RW displayed in the Title List menu represented by a thumbnail picture taken start of that title or chapter. If you prefer, select a different still picture a you Title Thumbnails HDD +R is from the from within title. picture the one The still No. When you edit a video tape you need one video deck to play the original tape and another to record what to by inserting points. Press THUMBNAIL to make the editing tape? title Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial Setup menu (see "Auto Chapter" on page 24). Delete, Add and Move functions, the Is +R Note: Caution When +RW one or more other Markers currently displayed that appears in the Title List menu. that you choose appears in both the picture Original or Playlist menu. Tip: You change the thumbnail picture of the title on the Chapter List menu. Select a chapter on the Chapter List menu then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is changed. can also Edit ng Throughout this manual, you will often see the words Original and Playlist to refer to the actual content and the edited version. Original: on content refers to what's actually recorded the disc. Playlist: disc --- content refers to the edited version of the how the Original content is to be played. 47 Making a New Playlist Use this function to add an Original -RWVR title or chapter to the Playlist. When you do this, the whole title is put into the Playlist (you can delete bits you don't need later see Deleting an Original or Playlist title/chapter on page 49). Adding Additional Title/Chapters to the Playlist -RWVR You Playlist --- 1. Playlist You add up to 999 chapters to one disc want to add a chapter of a title, use the can to the Choose title Choose Playlist, The later, a chapter on the Title List-Original Chapter List-Original menu to put into the a title add to or then press ENTER. menu options on appears the left side of the screen. title Playlist on . If you Adding a this page. chapter on the Title List-Original Chapter List-Original menu to put into the a menu or or then press ENTER. Playlist, The Original title or chapter to even if it is already registered. an title. only title/chapter 1. add menu or The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you add more chapter markers to the Original these are not automatically copied over into the can menu options appears on the left side of the menu. 2. Use v / V to select options 2. Use v / V to select [Playlist Add] option [Playlist Add] from menu then press ENTER. then press ENTER. 3. Choose a registered Title List-Playlist to insert a title that is or already chapter, then press ENTER. 4. Repeat steps 1-3 on the Playlist. You can view the added List-Playlist 3. Select The chapters on or the chapter Chapter menu. then press ENTER. title appears in the updated Playlist. All [New Playlist] new chapters of the title are added to the Playlist. 5. Press RETURN back to the Title 48 to add additional title (O) to exit, List-Original or MENU/LIST to go menu. Deleting Original Title/Chapter or When you from the an title erase a or chapter Playlist You only remove it from the Playlist; title/chapter remains in the Original menu. menu, you If you choose to delete a title or Deleting chapter Playlist can a delete a Part HDD -RWVR part which you do not want in the title. the 1. Useb/B/v/Vtochooseatitleyouwantto delete from the The Original (title/chapter) menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted from the Original are also removed from the Playlist. 2. on the Title List options appears then press ENTER. the left side of the menu. menu on Select [Delete Part] option then press Edit (Delete Part) menu appears ENTER. Title on the TV screen. [Start Point] icon is highlighted. Title Edit Example: (Delete Part) (HDD) Note: It may not be possible to delete than 5 seconds long. 1. chapters that are less Useb/B/v/Vtochooseachapterortitleyou want to delete on the Title List or Chapter List menu The then press ENTER. menu options appears on the left side of the screen. Select 2. [Delete] option from the options on the 3. Starts playback and use slow-motion to find the menu. Example: Title List (HDD) 4. Press ENTER at the pause step, search and starting point. starting point of the section you want to delete. 'End Point' icon is highlighted. The 5. 6. part is indicated Use pause the ending on the Press ENTER to confirm. The confirm message for deleting ending point will appear. pressing ENTER, displayed. 5. Repeat steps 1 - the new, updated menu Select Press RETURN 4 to continue to delete from the to exit the menu. Notes: is changed If more titles If you finish to ENTER. recording, are combined into repeatedly deleted, edit, select [Done] icon then press menu appears. name to 'Deleted Title'. than two titles are the deleted title's 3-6. The confirm message for deleting will appear. Use b / B to select [Yes] then press ENTER. The selected part is deleted from the title and Title List When DVD+RW Edit ng recordings, you can delete additional part. [Next Part] icon on the menu then press is 7. (O) repeatedly v / V to icon then press ENTER. ENTER, then repeat steps menu. 6. use With HDD [Yes] then press ENTER. The selected chapter or title is deleted. After [Cancel] point, of the section Tip: Use b / B to select 4. to find point. you want to delete. You can cancel the selected 3. Bar. step, search and slow-motion Press ENTER at the select Progress the one. When you are deleting a title or chapter, only the last one on DVD+RW increases remaining recording Note: It may not be possible to delete than 3 seconds long. parts that are less time. 49 Naming You can Title Sort and Playlist titles be up to 32 characters long. Original can name Names 1. a Choose the title you want to menu, then press ENTER. The options menu appears independently. This function allows you to organized by Date, Title, the Title List name on on the left side of the HDD Use v/V to select menu The [Rename (Title Name)] option can Category on listings the Title List- find title you want to watch menu on options the Title List-HDD menu, then appears the left side of the on menu. Use v/V to select 2. appears. Sort 3. So you Choose any title press ENTER. 1. then press ENTER. Keyboard menu. or show access easily. menu. 2. HDD options then press ENTER. [Sort] option appears. Enteranameforthetitle.Useb/B/v/Vto select character then press ENTER to confirm your selection. a Use MENU/LIST button to change keyboard type. Use v/V to select 3. [Date], [Title] option then press ENTER. After pressing ENTER, the displayed. or sorted [Category] menu is OK: Select to finish. Cancel: Cancels all entered characters. space at the cursor position. Delete: Deletes the previous character at the Space: cursor Inserts a position. b / B: Moves cursor to left or right. undo the last Remote control buttons for X x Deletion (PLAY): Inserts a (PAUSE/STEP): Deletes the cursor position. (STOP), -RWVR one a name position. cursor the after character at deletion you Use v / V to select made). [Undo] option then press ENTER. currently in the It doesn't matter whether you are menu screen; the last deletion is undone. CLEAR: Deletes the character at the cursor . / >: Moves Numbers entering space at the the Last If you make a mistake while deleting, you can undo it. There is one level of undo (in other words, you can Tip: N Undoing/Redoing (0-9): previous position. to left cursor or right. Enters the character at the cursor corresponding position. Tip: You 4. 5. can add the genre only for HDD title Choose OK then press ENTER to fix the and return to the previous menu screen. Press RETURN (O) repeatedly name. name to exit the You can't undo menu. Notes: Names recording. You can't undo anything after ejecting the disc from the recorder or switching the recorder into standby mode. You can still undo a deletion even after exiting the menu display. be up to 32 characters long. For discs formatted on a different recorder, you will see only a limited character set. Tip: When You can recording on discs, the entered player only 50 Notes: DVD-R, DVD+R name is displayed after finalization. or DVD+RW on the DVD can option. a redo the last undo action using the [Redo] Two Titles Into One Combining 3. Title Edit (Divide) highlighted. HDD Use this function to combine two HDD titles into Press ENTER. Current adjacent Original- menu appears. is [Divide] option picture one. Notes: The first title's This function is not available if there is only one thumbnail titles within the HDD. If there are more than 60 titles on the HDD, you The second title's cannot combine the titles. 1. thumbnail On the Title List-HDD menu, select the first title of the two titles you want to combine then press ENTER. The options menu appears on Select 5. [Combine] option Use find the left side of the screen. 2. 4. play, pause step, search and slow-motion the point you want to divide the title. Select [Divide] option to then press ENTER at the point. then press ENTER. To reset the press 6. point, select [Cancel] option ENTER. Repeat from step 3. Choose [Done] option dividing point. then then press ENTER to fix the The title is divided into two new titles. It take up to 4 minutes to divide. Note: You cannot select 3. 4. Combining Confirm message appears. One Use b / B to select Use this function to combine two then press ENTER. the updated menu is [Yes] pressing ENTER, displayed. HDD a title up into two On the Title List menu, select divide then press ENTER. The menu options chapter appears on a new titles. Title List +R adjacent Playlist or one. On the title you want to only one Edit ng List menu, select the second of the two chapters you want to combine Chapter then press ENTER The menu options appears on the left side of the screen. the left side of the 2. Use v / V to select [Combine] option. The combine indicator appears between the two chapters you want to combine. [Divide] option. Example: into Into within the title. chapter screen. Select +RW Chapters This function is not available if there is 1. split Two Note: +RW Use this command to -RWVR Original chapters Divide One Titles Into Two 2. less than 3 seconds. Select the second title of the two titles you want to combine then press ENTER. After 1. dividing point (HDD) 3. Press ENTER. 51 Moving a Playlist Chapter -RWVR Use this function to re-arrange the playing order of Playlist chapters on the Title List-Playlist menu. Tip If you select a hidden chapter or title on the Title List or Chapter List menu, you can 'show' it by choosing [Show] option on the menu. After doing that, you are able to Note: This function is not available if there is only one see the Protect chapter. a chapter Title Use this function to 1. Select 2. Press ENTER. The a chapter menu the on options Chapter List-Playlist the left side of the on appears menu. menu. 3. Use v / V to select [Move] option from then press ENTER. Hide a You skip playing chapters Chapter/Title or +RW +R titles without deleting from the disc. 1. Use vVbBto choose to hide on the Title List a or chapter Chapter title you want List menu, then or press ENTER. Options 2. Select appear the left side of the screen. Title List (DVD+RW) Press ENTER to confirm. The 52 on [Hide] option. Example: 3. +RW +R -RWVR protect against accidental or of the title. deleting 1. Press MENU/LIST to 2. Use vVbBto choose Playlist Useb/B/v/Vtochoosetheplaceyouwantto move the chapter to then press ENTER. After pressing ENTER, the updated menu is displayed. can recording, editing title. display a the Title List menu. title you want to protect then press ENTER. options 4. or chapter's or title's thumbnail will dim. Options appear on the left side of the 3. Select 4. Press ENTER to confirm. [Protect] from the screen. options. The lock mark will appears on the title's thumbnail. Tip If you select a title that has already been protected on the Title List menu, you can 'unprotect' it by choosing [Protect] option from the Title List menu options. After doing that, you can edit and delete the title. Copyright Dubbing Before Use the copying Back up a DVD. Make Dubbing features of this recorder to: important recordings the HDD to on This DVD copy of a in another player. play stored a Transfer video from a recording on product incorporates copyright protection technology that is protected by method claims the HDD to certain U.S. DVD to the HDD for editing. Transfer edited video from the HDD to DVD. The simplest method of copying is to use the One Touch Copy feature. Using this you can very simply copy the title that's currently playing from HDD to DVD, the other way around. or If the title's is less than 5 length available. (from Restrictions on HDD to seconds, the dubbing DVD) rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited. copying VR mode DVD-RW disc with CPRM Ver. 1.1, and the compatible following title to DVD it is copying copy-once protected automatically erased from the HDD. It is not therefore possible to copy a locked title that is copy-once protected. a identify copy-once protected material during playback by displaying disc information on-screen. can A media in NTSC format cannot be copied. What is 'CPRM'? CPRM is protection system (with scramble system) only allowing the recording of 'copy once' a PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL HDD/DVD 625p RECORDER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. restrictions apply: After COMPATIBLE WITH THIS PRODUCT AND MAY PICTURE freely copied again. If you want to transfer copy-once protected material from HDD to DVD, you'll use a HIGH DEFINITION TELEVISION SETS ARE FULLY PICTURE. IN CASE OF 625 PROGRESSIVE SCAN then be You patents and other intellectual property CAUSE ARTIFACTS TO BE DISPLAYED IN THE Some video material is copy-once protected. This means that it can be recorded to HDD, but it cannot need to of CONSUMERS SHOULD NOTE THAT NOT ALL Note: is not Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the area in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner. copy Fast copying Copying between DVD and HDD is a completely digital process and therefore involves no loss of quality in the audio or video. This means that you can transfer back and forth without having to worry about the quality getting worse with each copy 'generation'. It also means that copying can be carried out at the maximum speed possible. When copying from HDD to DVD, the speed of copying depends on the recording mode and the kind of DVD disc you're using. broadcast programs. CPRM stands for Content Protection for Recordable Media. This Recorder is CPRM compatible, which means that record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW you can discs formatted in VR mode, and CPRM recordings only be played on players compatible with CPRM. can that are specifically 53 Dubbing 1. from HDD to DVD On the Title List-HDD menu, select to dub then press ENTER. The menu options appears on a Dubbing title you want 1. the left side of the 2. Use v / V to select Dubbing [Dubbing] option or menu Fast), 'Start' icon is then press 2. (HQ, SQ, LQ, 3. highlighted. 'Start' icon is [Start] icon Dubbing starts. stop dubbing STOP more information on Fast is highlighted, at any other (x). --1 hour contents of LQ: 5-6 minutes --1 hour contents of HQ: 12-15 minutes Stopping dubbing in [Fast] mode partway through will cancel the recording and any data recorded up to that point will be lost. title. 54 or 4. When space on the disc is insufficient, the mode is not available. remaining [Fast] then press mode is not available for edited HDD appears. Fast), (HQ, SQ, LQ, then press V. highlighted. [Start] icon Dubbing starts. 5. To stop dubbing STOP recording time of [Fast] mode could be varied depending on data size of source. Approximated Time (Example: 4x DVD disc): The [Dubbing] option Only available when copying VR mode disc to HDD. (See page 53 for more information on Fast copying.) time, press The [Fast] the left side of the Fast: press ENTER. Notes: If the on Use b / B to select record mode EQ, When To menu then press V. copying. 5. Use v / V to select Dubbing appears. Fast: See page 53 for 4. appears title you want to ENTER. Use b / B to select record mode EQ, options a screen. ENTER. 3. On the Title List menu, select dub then press ENTER. Menu screen. from DVD to HDD is highlighted, at any other press ENTER. time, press (x). Notes: Depending on the conditions of the recording equipment or the disc itself, the dubbing may capable. not be Stopping dubbing in [Fast] mode partway through will cancel the recording and any data recorded up to that point will be lost. The recording minutes. time of [Fast] mode can take up to 19 One Touch The One Touch Copy (HDD feature Copy copies to the DVD) currently playing title from the HDD to DVD. The whole title is copied, regardless of where in the title you start copying. The recorder copies at the maximum speed possible. For One Touch to Copy work, make sure that a recordable DVD disc is loaded. During HDD playback, press DUBBING to copy the current title to DVD. The display indicates that the title copied. Playback continues while copying. is on-screen You cannot copy a the One Touch use title if any Copy being function to part of the title is copy-once protected. One Touch One Touch Copy (DVD from DVD to HDD Copy to copies HDD) single copying, a title to the HDD in real time. When you start playback jumps back to the start of the title, then continues through to the end of the title, when recording automatically stops. The copy will be made in the recording mode (HQ, SQ, LQ, EQ) that is currently set. During DVD playback, press DUBBING to copy the current title to HDD. Playback starts again current title. The title is from the on-screen beginning of the display indicates that the being copied. Notes: Video CD cannot be The copying stops badly scratched or If some copied to HDD. when then recorder detects copy Dub ing a protected part. part of the title being copied is copy- protected, copying will start, portions will not be copied. During Playlist title's but the playback, copy-protected One Touch Copy is not available. Tip: To stop dubbing at any other time, press STOP (x). 55 2. Reference To overwrite a new video Title List will appear You menu can remove STOP +RW recording Play mode. as shown below. Tip Additional Information Overwriting Recording Press TITLE in on a the Title List menu by pressing (x). previously recorded title, follow these steps. This feature is not available for DVD+Rs, that always record at the end of the Disc. Select 1. input you want to record source (TV channel, AV1-4, DV). Press MENU/LIST to 2. the Title List display menu. 3. To play back a press ENTER title, select the title you or N want then (PLAY). Playing Your Recordings on Other Players (Finalizing a Disc) Most regular DVD recorded in Video players play can Use vVbBto choose 3. a title you want to Check the manual that Press REC 4. Overwrite starts from recording. the start point The new (x) to stop the overwrite recording. title is created and updated menu is displayed. Notes: This function is not available for If the overwrite is length longer of the current than title, the protected title. the recording a at the protected, starting point of the the title. If the selected title's seconds, the title is recording length next title is overwritten. But if the next Title List You can view the Title List 1. 56 player that is on displayed on the capable of playing DVD+RW menu DVD+R discs. Insert DVD+R player to play. 'fixes' the ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. The menu can be accessed by pressing MENU/LIST or TITLE. To finalize a disc, refer to "Finalize" on page 25. Notes: Unfinalized DVD+RW is DVD+RW disc recorded playable on regular DVD players. The edited contents of compatible Any edited compatible on regular a DVD+RW disc is DVD players only after already. contents of the DVD+R disc are not regular DVD players. (Hide, chapter combine, added chapter mark, etc.) How long finalization takes depends on the type of on disc, how much is recorded number of titles on DVD+R DL disc can finalize. or not. finalization. +R other DVD or displayed or Players menu other DVD Recorders +RW is less than 10 protected, overwriting stops. Viewing or next title is overwritten. But if next title is overwriting stops with the other play recordings and editings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVDFinalizing Press STOP also can of the title. 5. came or mode, finalized check what formats of discs it will to start overwrite (z) recording players DVD-RW discs recorded in VR overwrite. finalized discs mode, finalized DVD+R DVD+RWs. A small number of DVD on the disc, and the the disc. take up to 30 minutes to Language Codes Use this list to your desired language for the Disc Audio, Disc Subtitle, Disc Menu. input Language Code Abkhazian following Code 6566 Language Fiji Afar 6565 Afrikaans initial settings: Code 7074 Language Lingala Code 7678 Language Singhalese Finnish 7073 Lithuanian 7684 Slovak 8375 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam Ameharic 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 8373 8471 8479 Area Codes Choose an area Area code from this list. Code Code Area Code Area Code ET Malaysia MY Saudi Arabia SA AR Ethiopia Fiji FJ Maldives MV SN Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA Hungary HU New Zealand NZ Sweden SE Chile CL India IN NG Switzerland CH China CN Indonesia ID Nigeria Norway NO Thailand TH Colombia CO Israel IL Oman OM TR Congo CG Italy IT Pakistan PK Turkey Uganda Costa Rica CR Jamaica JM Panama PA Ukraine UA Croatia HR JP United States US KE Paraguay Philippines PY CZ Japan Kenya PH Uruguay UY Denmark DK Kuwait KW Poland PL Uzbekistan UZ Ecuador EC LY Portugal PT Vietnam VN Egypt EG Libya Luxembourg LU Romania RO Zimbabwe ZW El Salvador SV Russian Federation RU Afghanistan Argentina Czech Republic AF Area SG SK UG 57 Your TV with the Controlling Supplied Remote Control You You can control the sound You source, and power switch of your LG TV with the supplied remote. can control your TV level, input using other TVs with the remote Controlling the buttons below. can control the sound source, and well. If your TV is level, input power switch of non-LG TVs as listed in the table below, set the appropriate manufacturer code. 1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV 2. (see the table below). Release TV POWER button. Code numbers of controllable TVs If more them than at one one code number is listed, try entering time until you find the a one that works with your TV. TV Control Buttons Manufacturer Code Number LG / GoldStar 1 Zenith 1,3,4 Samsung 6,7 Sony 8,9 Hitachi 4 (Default), 2 Notes: Depending on function the on your TV, TV, all buttons may not after entering the correct some or even manufacturer code. By pressing You POWER Turn the TV AV Switch the TV's can on or If you enter a new code number, the code number previously entered will be erased. off. input source between the TV and other input sources. 58 PR +/-- Scans up or down through memorized channels. VOL +/-- Adjust MUTE Temporarily press again to restore. default again. the volume of the TV. turns TV sound When you replace the batteries of the remote, the code number you have set may be reset to the OFF, setting. Set the appropriate code number Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Solution Cause Symptom No power. The power cord is disconnected. the power cord into the wall outlet securely. No TV/DVD mode for the recorder is set Press TV/DVD to TV. repeatedly to choose DVD mode. TV indicator disappears in the display picture. Plug on the remote control window. The TV is not set to receive recorder Select the signal output. on the TV appropriate video input so the picture from the recorder appears The video cable is not connected on the TV Connect the video cable mode screen. securely. securely. No sound. The connected TV power is turned off. Turn The Select the correct connected with the equipment audio cable is not set to receive recorder signal output. The audio cables not connected are the TV. on audio receiver input mode the on you can listen to the sound from the recorder. so Connect the audio cable securely. securely. The playback picture is The power of the equipment connected with the audio cable is turned off. Turn The audio Replace cord is connecting The disc is damaged. the on connected equipment with the audio cable. it with new one. Clean the disc. dirty. poor. The recorder does not start No disc is inserted. Insert disc. a indicator in playback. An unplayable disc is inserted. Insert a placed upside down. (Check the disc system, and regional code.) playable type, color The disc is (Check that the disc the display window is lit.) disc. Place the disc with the side playback down. The disc is not placed within the correctly guide. The picture from external input is dirty. Clean the disc. The level is set. Cancel the Rating the skipped usingv/V. over The are sound of picture broadcasting channel weak or missing. or Camcorder A/V input or function or change level. Those channels Restore channels. See are not stored in the Aerial or Connect the cables are loose. component directly to your TV. on "Program Edit" page 18. Tighten connections replace or cable. is image is not image via Turn camcorder Camcorder is off. on and operate properly. shown. Camcorder guide. You cannot connect via this recorder. recorder. when Rating tray signal from the external component is copy-protected. distorted Some channels rating the disc on inside the The disc is The video the Place the disc DV IN to The recorder's source is incorrect. Use AV to select input channel (AV1, AV2, DV, etc.) recorder is not shown on TV screen. 59 The disc Cannot play a disc recorded using this recorder on Some another not record will not players The disc or recorded in Video mode. was was recorded in VR player must be RW compatible in order to play it. No solution. The remaining Use another disc. The source are you copy protected. When setting When the protected the on to record is trying the recording channel, on recording programs that is not The other mode, Discs recorded with copy-once material cannot be played on other players. channel is tuned recording possible. (page 25) No solution. even a blank space disc is insufficient. did successfully. Timer play Finalize the disc. finalized disc recorded in Video mode. player. Cannot record Solution Cause Symptom the TV's to a own source. Select the channel the recorder's on built-in TV tuner. tuner. Video mode You cannot record the disc, Use a VR mode formatted disc for copy-once material. are copy-once cannot be recorded. Clock in recorder is not set to correct Set clock to correct time. See "Auto time. Clock Set" or "Manual Clock Set" on page 19. Timer has been programmed Reprogram Recording" incorrectly. Timer record indicator appear after Stereo Audio Record and/or Playback TV is not is not present. light does programming timer. not Reprogram Timer. See "Timer on page 43. Timer. No solution. Stereo-compatible. Broadcast program is not in stereo format. No solution. The recorder A/V Out Make A/V connections. Stereo is connected to TV A/V jacks are In jacks. not available only via A/V output from the recorder. The recorder Audio/Video Out is not Select AUX selected for input. viewing at the TV. or A/V source as TV The recorder's TV audio channel is Set TV audio channel mode to Stereo. set to See mono. "Changing TV audio channel" on page 42. The remote control The remote control is not does not work the remote properly. sensor pointed Point the remote control at the remote at of the recorder. sensor of the recorder. The remote control is too far from the Operate recorder. 7m. There is an obstacle in the of the path the remote control within Remove the obstacle. remote control and the recorder. The batteries in the remote control are Resetting The unit is or The ...you new ones. but the power will not turn panel display is not working. recorder is not operating normally. can reset the recorder as follows: Press and hold the POWER button for at least five following symptoms... off. The front 60 plugged in, the batteries with exhausted. the recorder If you observe any of the Replace on seconds. This will force the unit to power off then turn the unit back on. the power and then plug it in Unplug cord, wait again. at least five seconds, Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Television AC 110-240V, 50/60 Hz 45W 430 X 49 X 350 4.6 mm (w x h x d) without foot kg 5˚C to 35˚C 5 % to 90 % system PAL I, B/G, I/I, SECAM D/K, K1 colour system Recording format PAL Recording format DVD Video Recording Recordable media HDD Recording, DVD-VIDEO (250GB), DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable, DVD+Recordable (Double Layer) Recordable time recording format Sampling frequency Compression format Audio recording format Sampling frequency Compression format DVD (4.7GB): Approx. 1 hour (HQ mode), 2 hours (SQ mode), 4 hours (LQ mode), 6 hours (EQ mode) DVD+R DL (8.5GB): Approx. 3 hour (HQ mode), 3 hours 40 minutes (SQ mode), 7 hours 10 minutes (LQ mode), 10 hours 30 minutes (EQ mode) HDD (250GB): Approx. 66 hours 30 minutes (HQ mode), 129 hours (SQ mode), 239 hours (LQ mode), 356 hours (EQ mode) Video PlaybackFrequency response Signal-to-noise ratio Harmonic distortion Dynamic range 27MHz MPEG 2 (VBR support) 48kHz Dolby Digital DVD (PCM 48 kHz): 8 Hz to 20 kHz, CD: 8 DVD(PCM96kHz):8Hzto44kHz More than 100 dB (AUDIO OUT connector) Less than 0.008% (AUDIO OUT connector) More than 95 dB (AUDIO OUT connector) Hz to 20 kHz Inputs AERIAL IN VIDEO IN AUDIOIN DV IN Aerial input, 75 ohms 1.0 Vp-p 75 ohms, sync negative, RCA jack x 2 / SCART x 2 0dBm morethan47kohms,RCAjack(L,R)x2/SCARTx2 4 pin (IEEE 1394 standard) Outputs VIDEO OUT COMPONENT VIDEO OUT HDMI video/audio output Audio output (digital audio) Audio output (optical audio) Audio output (analog audio) Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 19 pin (HDMI standard, Type A) 0.5 V (p-p), 75 Ω, RCA jack x 1 3 V (p-p), 75 Ω, Optical connector x 1 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 1 x 2 / SCART x 2 Accessory: Scartcable.............................1 Videocable.....................1 Audiocable(L,R)........................1 RFCoaxialCable................1 Remotecontrol..........................1 Batteries.......................2 Design and specifications are subject to change without notice. P/NO:3834RD0059J 61
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement