Mastech MS5205B Digital Insulation Tester Manual


Add to my manuals
30 Pages

advertisement

Mastech MS5205B Digital Insulation Tester Manual | Manualzz

DIGITAL INSULATION TESTER

OPERATING INSTRUCTION

MS5205B

MS5205B

1000V

CAT IV

600V

Electrical symbols

DIGITAL INSULATION TESTER

10

10

10

11

11

11

6

8

10

DIGITAL INSULATION TESTER

Replacing test leads

1000 CAT III 600V CAT IV

DIGITAL INSULATION TESTER

1

DIGITAL INSULATION TESTER

Electrical Symbols

Note-Important safety information, refer to the instruction manual.

Complies with European (EU) safety standards

Direct current

Alternating current

Earth (ground) TERMINAL

Equipment protected throughout by double insulation or reinforced insulation.

CAT III: MEASUREMENT CATEGORY III is applicable to test and measuring circuits connected to the distribution part of the building's low-voltage MAINS installation.

CAT IV: MEASUREMENT CATEGORY IV is applicable to test and measuring circuits connected at the source of the building’s low-voltage MAINS installation.

2

DIGITAL INSULATION TESTER

3

DIGITAL INSULATION TESTER

4

DIGITAL INSULATION TESTER

5

DIGITAL INSULATION TESTER

6

DIGITAL INSULATION TESTER

7

DIGITAL INSULATION TESTER

8

DIGITAL INSULATION TESTER

9

DIGITAL INSULATION TESTER

10

DIGITAL INSULATION TESTER

11

DIGITAL INSULATION TESTER

12

DIGITAL INSULATION TESTER

13

DIGITAL INSULATION TESTER

14

DIGITAL INSULATION TESTER

15

DIGITAL INSULATION TESTER

16

DIGITAL INSULATION TESTER

17

DIGITAL INSULATION TESTER

18

DIGITAL INSULATION TESTER

19

DIGITAL INSULATION TESTER

20

DIGITAL INSULATION TESTER

21

DIGITAL INSULATION TESTER

WARNING

To avoid electric shock, make sure that the test leads have been clearly move away from the circuit under measurement before opening the battery cover of the meter.

Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable

(ni-cad, ni-mh, etc) batteries.

22

Replacing Test Leads

Replace test leads if leads become damaged or worn.

WARNING

DIGITAL INSULATION TESTER

Use meet EN 61010-031 standard, rated CAT III 1000V, or better test leads.

23

DIGITAL INSULATION TESTER

180(L)mm X 155(W)mm X 76(H)mm.

900

24

DIGITAL INSULATION TESTER

25

DIGITAL INSULATION TESTER

26

R-00-05-2078

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Frequently Answers and Questions

What are the dimensions of the Mastech MS5205B?
The dimensions are 180mm x 155mm x 76mm.
What is the maximum input voltage for the Mastech MS5205B?
The maximum input voltage is 1000V.
What are the two main safety standards that the Mastech MS5205B complies with?
The two main safety standards are IEC61010 and EN61326.
What does the CAT IV safety rating mean?
CAT IV safety rating means the device is suitable for use on the primary side of distribution panels and similar installations.
What is the insulation resistance range of the Mastech MS5205B?
The insulation resistance range is 0.01MΩ to 2000MΩ.
How many test voltages does the Mastech MS5205B have?
The Mastech MS5205B has 5 test voltages: 50V, 100V, 250V, 500V, and 1000V.
What is the maximum capacitance that the Mastech MS5205B can measure?
The maximum capacitance that the Mastech MS5205B can measure is 10μF.
What type of batteries does the Mastech MS5205B use?
The Mastech MS5205B uses 6 AA batteries.
What is the polarity of the Mastech MS5205B's test leads?
The polarity of the Mastech MS5205B's test leads is red for positive and black for negative.
What is the warranty period for the Mastech MS5205B?
The warranty period for the Mastech MS5205B is 1 year.

advertisement