P O W E R C O N V E R S I O N P R O D U C T S
SEC SERIES BATTERY CHARGERS
FEATURES
• Advanced switch-mode design
• Suitable for charging flooded, AGM, or GEL CELL lead
acid batteries
• “Half Power Mode” reduces maximum charging current to
half the rated capacity, allows for safe charging of lower
capacity batteries.
• 3 color LED indicators for charging status
• Light weight, compact size and quiet operation
• 2 Year warranty
APPLICATIONS
• Automotive
• Recreational vehicles
• Marine
• Communications sites
• Battery back-up systems
TECHNICAL SPECIFICATIONS
45 AMPS
Model
Input Voltage
Input Frequency
Output Voltage, VDC
Absorption / Boost, UO*
Float / Maintenance, U*
Maximum Charging Current
Duration for Absorption
Boost Stage 2, Uo
Temperature Compensation (optional)
Wired Remote Panel (optional)
Cooling
Protection
Output Banks
Output Connector
Operating Temperature Range
Fuses
AC input, 5mm x 20 mm
Time Delay
AC input, Automotive
Blade Type (Bussmann), “ATC”)
Dimensions (LXWXH)
Weight
SEC 1245E
207 - 253 VAC
50 Hz
14.4 VDC
14.8 VDC or Disabled
13.8 VDC
45 A
4 Hours or 8 Hours
Yes, with sensor TF-500
Yes, with 900-RC
By fan, based on output current
Overload
Short Circuit
Reverse Polarity
Thermal Overload
2
Tubular hole (dia8 mm) with set screw
0 - 40°C
250 V, 4.7 A
32 V, 30 A (2 pieces)
330X230X108 mm
5 Kgs
*The charging voltages shown are applicable at battery temperature of 25°C
Technical Specifications subject to change without notification
To view a full selection of Samlex products visit our website at: www.samlex.com or www.samlex-solar.com
