P O W E R C O N V E R S I O N P R O D U C T S
SWI Series Pure Sine Wave Inverter
FEATURES
• Switching mode design
• High efficiency
• Pure sine wave output voltage
• 12 VDC input and 230 VAC output
• Overload protection
• High output current surge
• Low battery alarm / shut down
• Low idle power draw of less than 0.7 Amps
• Schuko output
• Remote input
• 2 Year warranty
APPLICATIONS
• Service vehicles
• Recreation Vehicles
• Telecommunication
• Solar power systems
• Trucks
• Marine
TECHNICAL SPECIFICATIONS
Model
Input voltage
400 WATTS
SWI 400-12
10.7 - 16.5 VDC
Output Voltage
Output frequency
Output Voltage Waveform
Total Harmonic distortion
Output Power
Continuous
Surge (for <1 second)
Low Input Voltage Warning Alarm
Low Input Voltage Shut-down
High Input Voltage Shut-down
Operating Ambient Temp
Peak Efficiency
Cooling
Connections
Input
Output
DC Side Input Fuse
(automotive Type ATC 32V)
Dimensions (LxWxH)
Weight
Remote controller (optional)
230 VAC+/-3%
50 Hz / 60 Hz selectable
Pure Sine Wave
<2.5%
400 Watts*
800 Watts*
10.7 V +/- 0.1 V
10 V +/- 0.1 V
>16.5 V
-20 to 50°C
>88%
1 x Temperature Controlled Fan
Hex screw M6 connection
VDE European Outlet (Schuko)
35 A x 2
269 x 174 x 70 mm
1.8 Kgs
RC-15
The power specified is for resistive type of loads (like incandescent lamps, heaters etc.) which have a power factor = 1.
Reactive type of loads (like electric motor driven loads, fluorescent lights, computers, audio/video equipment etc.) may have a power factor of 0.8 to 0.6. The power that can be delivered to such type of loads will reduce by this factor.
Technical Specifications subject to change without notification.
To view a full selection of Samlex products visit our website at: www.samlex.com or www.samlex-solar.com
