Samlexpower IDC-200D-12 Fully Isolated Converter Specification

DC-DC

Step Down

Converter

16A

Model

IDC-200D-12

16 Amps

Design Features

- Fully isolated

- Short circuit protected

- Current limited

2 YEAR LIMITED WARRANTY

INPUT

FUSE

SPECIFICATIONS

WIRE SIZE

SAFETY & EMC

GENERAL

MODEL NO.

INPUT VOLTAGE RANGE

OUTPUT VOLTAGE

OUTPUT CURRENT

INPUT TO OUTPUT ISOLATION

OUTPUT RIPPLE & NOISE

PEAK EFFICIENCY

COOLING

OPERATING TEMPERATURE

HUMIDITY (Non-condensing)

PROTECTIONS

EXTERNAL INPUT SIDE FUSE

(Inline with “input +” terminal)

EXTERNAL OUTPUT SIDE FUSE

(Inline with “output +” terminal)

INPUT WIRE (Up to 6 ft)

OUTPUT WIRE (Up to 10 ft)

EMISSION

IMMUNITY

AUTOMOTIVE

INPUT / OUTPUT CONNECTIONS

DIMENSIONS, MM (L x

W x

H)

DIMENSIONS, INCHES (L x

W x

H)

WEIGHT, KG

WEIGHT, LB

NOTE: Specifications are subject to change without notice

IDC-200D-12

60 - 120 VDC

12.5 VDC

16A

Yes. > 400V RMS

< 50 mV RMS

85%

By temperature controlled fan

-20oC to +30oC, De-rate linearly to zero at 70oC

Max 95%

Overload / short circuit on the output side, over voltage on the output side, over voltage / transients on the input side, reverse polarity on the input side, over heating

125V, 5A

32V, 20A

AWG #14

AWG #6

EN50081-1 / EN61000-6-3

EN50082-1 / EN61000-6-1

95 / 54 / EC

Quick connect male 6.3mm / ¼” flat blade

176 x 88 x 50

6.9 x 3.5 x 1.9

0.6

1.4

12004-IDC-200D-12-0319

To view a full selection of Samlex products visit our website at www.samlexamerica.com

or contact us: 1-800-561-5885 or [email protected]