Freestyle Shark CX5 Owner's Manual

Qa
Freestylee
#711 SHARK CX5™
WATCH INSTRUCTIONS
FEATURES:
* CURRENT TIME
* DAY/MONTH/DATE
* CHRONOGRAPH
* LARGE DIGIT DISPLAY
* DAILY ALARM
* OPTIONAL 24-HOUR TIME
* WATER-RESISTANT TO
330FT/100M
* NIGHT VISION™
ILLUMINATION
KEY REFERENCES
In normal time mode, the button
functions are as follows:
LIGHT - Turns on the Night Vision ™
S1 - Displays the alarm time
S2 - Displays the date
S3 - Changes the function
HOW TO SET NORMAL TIME
In normal time mode, press and
hold the the S3 button for three
seconds. Release the S3 button
and press it again. The seconds
digits will flash. Press the S1 button
to reset the seconds to zero.
After resetting the seconds, press
the S2 button to flash the minute
digits. Advance the digits by
pressing the S1 button.
Press the S2 button again to flash
and set the hour digits. Advance
the digits by pressing the S1 button.
Press the S2 button again to flash
and set the month digits. Advance
the digits by pressing the S1 button.
Press the S2 button again to flash
and set the date digits. Advance
the digits by pressing the S1 button.
Press the S2 button again to flash
and set the day segments. Push
the S1 button to select the correct
day.
Press the S3 button to exit the
normal time setting mode and enter
the normal time mode.
24 - HOUR SETTING
To set the time in 24-hour mode,
press and hold the S1 button. While
holding the S1 button down, press
the S3 button. The hour digits will
change from 12-hour mode to 24-
hour mode. 12-hour mode is
represented by the AM or PM
displayed in normal time mode.
24- hour mode will not show AM or
PM
HOW TO VIEW THE DATE
In normal time mode, press and hold
the S2 button to view the date in
month-day format. To view the date
in day-month format, press and hold
the S2 button and at the same time
press the S1 button. Use the same
procedure to toggle between the
two date formats.
SETTING THE DAILY ALARM
In normal time mode, press and hold
the S3 button until the hour digits
begin to flash. Press the S1 button
to advance the hour digits. Press
the S2 button to flash the minutes
digits. Advance the digits by presing
the S1 button. Push the S3 button
to exit the alarm setting mode after
it has been set.
HOW TO TURN ON/OFF
ALARM AND CHIME
In normal time mode, press and hold
the S1 button. While holding down
the S1 button, press the S2 button
once to turn on the chime function.
Press the S2 button again to turn
on the alarm function.
Press the S2 button again to turn
off the chime function.
Press the S2 button again to turn
off the alarm function. Release the
S1 button to return to normal time
mode.
USING THE CHRONOGRAPH
In normal time mode, press the S3
button three times to enter the
chronograph mode. Push the S2
button to start and stop the
chronograph. To record a lap time,
press the S1 button while the
chronograph is running. The lap
time will appear on the display,
while the chronograph continues to
run. Press the S1 button again to
return to the chronograph. When
the chronograph is stopped, press
the S1 button to reset it back to zero.
HOW TO OPERATE THE
NIGHT VISION™
Press the LIGHT button to activate
the Night Vision™ illumination. The
light will remain illuminated for
approximately four seconds.
CARE AND MAINTENANCE
1. Back case cover should only be
removed by an authorized watch
repair specialist.
2. Always rinse your watch in fresh
water after immersion in salt or
chlorinated water.
3. Do not expose watch or band to
chemicals such as gasoline, aerosol
sprays, paint or solvents.
4. Periodically clean with a soft cloth
and fresh water.
WARRANTY INFORMATION
FreeStyle U.S.A. warrants, to the
original purchaser, that its watches
are free from defects in materials
and workmanship for a period of
ten (10) years under normal use.
The warranty excludes batteries,
crystal, watch case plating, and
strap/ bracelet/ band. The warranty
excludes normal wear and tear and
abuse.
Special note: FreeStyle® watches
are designed and engineered to be
highly water-resistant, and to
withstand the most active of
lifestyles. The most important
component in keeping your watch
water-resistant is the case back O-
ring, which prevents water from
entering the watch through the case
ack.
Water leakage most often occurs
after improper battery replacement.
We strongly recommend having a
certified jeweler, watch repair
technician or FreeStyle's service
center replace your battery. Water
leakage due to improper battery
replacement is not covered under
warranty.
Visit our website at:
www.freestyleusa.com