DT301T-TR

Rugged GNSS Tablet

Federal Communica�on Commission Interference

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc�ons, may cause harmful interference to radio communica�ons. However, there is no guarantee that interference will not occur in a par�cular installa�on. If this equipment does cause harmful interference to radio or television recep�on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separa�on between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Cau�on: Any changes or modifica�ons not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules.

Opera�on is subject to the following two condi�ons: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera�on.

This device and its antenna(s) must not be co-located or opera�ng in conjunc�on with any other antenna or transmi�er.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

INTRODUCTION

Thank you for acquiring the DT Research Rugged GNSS tablet — the DT301T-TR. Featuring a slim yet robust enclosure, the DT301T-TR with 10.1” capaci�ve touch display is powered by the Intel® processor, offering op�mal combina�ons of performance and power savings. The DT301T-TR is available with Microso�® Windows® opera�ng system. The opera�ng system features web browser, client/ server compu�ng so�ware, media player, accessories, and applica�ons support. With its high-accuracy GNSS module, the DT301T-

TR is ideal for mapping, posi�oning, and many GIS applica�ons.

PACKAGE CONTENTS

• One DT301T-TR , Ba�ery Pack and Handstrap

• AC-DC Power Adapter with Power Cord

• Basic Opera�on Guide

Major op�ons, depending on configura�on:

• Desktop Charging Cradle with DC-in Power Jack and Ethernet and USB Ports

• Wall/ Vehicle Mount Cradle with DC-in Power Jack and Ethernet and USB Ports

• Detachable Keyboard; connects automa�cally without switching and pairing, ideal for

2-in-1 applica�ons

ENGLISH 8 signage dtri com

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

Copyright © 2018, DT Research, Inc. All Rights Reserved.

BOG102318 DT301T-TR ENG

The DT301T-TR

A

B

C

Ba�ery/Power LED

1

2

3

D

E

F

Input/ Output Ports

A

B

C

Headphone Jack 3.5mm

USB 3.0 Port

DC Power Input

D

E

F

Smart Card/CAC Reader

Back Camera

GNSS Module. The Helix Antenna is op�onal

Bu�on Func�ons

BUTTON ACTION

1

Power bu�on

2

Programmable bu�ons

3 Ba�ery latch • Push the switch up to unlock the latch, then slide the latch le� to remove the ba�ery.

ENGLISH 2

Precau�ons

• Always exercise care when opera�ng and handling the DT301T-TR.

• Do NOT apply excessive pressure to the display screen.

• We recommend using the Digital Pen (op�onal) to keep the screen clean

• Avoid prolonged exposure of the display panel to any strong heat source. Wherever possible, the DT301T-TR should face away from direct light to reduce glare.

• If the AC-DC power adapter is used to recharge or power the tablet, do NOT use any

AC-DC adapter other than the one provided or acquired from the manufacturer or its partners.

• In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power off the DT301T-TR and disconnect all power sources. Report the problem to your device provider immediately.

• Never a�empt to disassemble the DT301T-TR, as this will void the warranty.

Basic Features

The DT301T-TR rugged GNSS tablet integrates a bright display, integrated GNSS module one USB port, and embedded networking elements such as wireless LAN and Bluetooth or op�onal 4G. The DT301T-TR is complemented by a suite of accessories, including addi�onal hot-swappable ba�eries, charging cradles, and ba�ery charger kit, for a comprehensive user experience.

A DT301T-TR typically integrates an 802.11ac wireless LAN (WLAN) adapter that may connect to other wireless devices or access points. If your DT301T-TR does not come with such a network adapter, please consult your device provider to establish the desired network connec�vity.

3 ENGLISH

OPERATION

Powering ON and OFF

To ac�vate the DT301T-TR , push and quickly release the Power Bu�on. The display will come on in a few seconds. To put the DT301T-TR in Standby mode, push and quickly release the Power Bu�on. To turn the DT301T-TR off for extended storage, power off safely using any so�ware func�on that “shuts down computer” provided in the so�ware opera�ng system.

NOTE:

The ba�ery pack shipped with your tablet may be low in power. Please use the

AC-DC adapter with the DT301T-TR when se�ng up for the first �me to fully charge the ba�ery pack, or use the op�onal ba�ery charger kit.

NOTE:

When the ba�ery pack is charging, the blue-colored Ba�ery LED should blink slowly. If plugging in the AC-DC adapter does not trigger this blinking ac�vity and the LED stays dark, the ba�ery pack may have been drained substan�ally.

Try unplugging/ replugging the AC-DC adapter to the DT301T-TR a few �mes to ac�vate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Bu�on to put the tablet in “Standby” mode while not in use. Pushing briefly on the same bu�on will wake up the system within seconds.

NOTE:

Avoid using the Power Bu�on (“hold 4+ seconds” feature) to turn off the tablet— this form of hardware shutdown is intended to be a means of recovery from lockups, and not as normal opera�on.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed a�er a launch sequence of several seconds. The wireless LAN connec�on may take 10-15 seconds to be established.

Configuring the Mobile Tablet

The DT301T-TR may be configured using the u�li�es and methods dictated by the so�ware opera�ng system. The DT301T-TR should be configurable for various proper�es such as user profiles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT301T-TR is o�en delivered with an embedded (user-inaccessible) 802.11ac WLAN adapter equipped with a hidden custom antenna.

• T hrough the support of typical WLAN adapters, the DT301T-TR will detect 802.11 access points in the vicinity for you to select the access point of your choice for connec�on.

• T he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT301T-TR and the access points have to match. The SSID is case-sensi�ve and it is recommended that you enable WEP/WPA/WPA2 encryp�on (or advanced alterna�ves) for secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network admin istrator or your networking equipment literature to properly configure associated se�ngs such as Authen�ca�on mode, etc.

• R efer to the access point opera�ng manuals for se�ng up the 802.11 access points .

ENGLISH 4 5 ENGLISH

Bluetooth

The Bluetooth configura�on applica�on is enabled from the System Tray or from the

Windows Mobility Center . Follow the instruc�ons and op�ons provided within the appli ca�on to configure and invoke Bluetooth connec�vity with the corresponding peripherals.

Desktop Cradle

The DT301T-TR is complemented by an op�onal Desktop Cradle for support, pass-through charging, and connec�on to a range of USB peripherals, including keyboard and mouse.

The Cradle offers the following interfaces: a DC-in port for the AC-DC adapter, two

4k-capable DisplayPort outputs, an Ethernet port, and four USB ports. Always seat the

DT301T-TR securely onto the cradle. The cradle must be powered by the AC-DC adapter for the Ethernet and USB ports to func�on. The ba�ery pack on the DT301T-TR may be recharged by connec�ng the AC-DC adapter directly to the DC-in port on the DT301T-TR or through the DC-in port on the Desktop Cradle while the DT301T-TR is docked to the

Cradle.

USING THE Mobile Tablet

Peripherals Support

Through its USB 3.0 port, the DT301T-TR supports a wide range of USB-based peripherals.

These peripherals are applicable for so�ware installa�on, applica�ons storage, data storage, and system so�ware recovery and updates. The DT301T-TR is also compa�ble with custom mountable cradle op�ons. These securable and mountable cradles provide an interface to VESA mounts and arms, and to ports that may include USB, Ethernet, and pass-through power.

Remote Management

Depending on so�ware configura�on, the DT301T-TR can be centrally managed for asset monitoring and for so�ware control. Please consult your device provider.

For More Support

Users can download the Tablet Modules Basic Opera�on Guides from the DT Research website.

If the DT301T-TR comes with a Mobile broadband module, please contact your product and/or service provider for the SIM Card installa�on procedures.

ENGLISH 6

To Hold the Tablet

Le� hand: grip the le� back side of the tablet with your le� hand four index fingers, with thumb res�ng on the top of the back side of the tablet and palm securely against the back.

Right hand: grip the right back side of the tablet with your right hand four index fingers, with thumb res�ng on the top of the back side of the tablet and palm securely against the back.

7 ENGLISH