0

0

560

568

550

553

10

554

535

140

0

20

595

85

°

320

6

8

EMPK11 F645 CH

DIMENSION

OVERALL CABINET

MIN Height of the wall cabinet niche, including all required space for installation or ventilation

MIN Height of the tall cabinet niche, including all required space for installation or ventilation

MIN Height of the base cabinet niche, including all required space for installation or ventilation

MAX Height of the wall cabinet niche, including all required space for installation or ventilation

MAX Height of the tall cabinet niche, including all required space for installation or ventilation

MAX Height of the base cabinet niche, including all required space for installation or ventilation

MIN Width of the wall cabinet niche, including all required space for installation or ventilation

MIN Width of the tall cabinet niche, including all required space for installation or ventilation

MIN Width of the base cabinet niche, including all required space for installation or ventilation

MAX Width of the wall cabinet niche, including all required space for installation or ventilation

MAX Width of the tall cabinet niche, including all required space for installation or ventilation

MAX Width of the base cabinet niche, including all required space for installation or ventilation

MIN Depth of the wall cabinet niche, including all required space for installation or ventilation

MIN Depth of the tall cabinet niche, including all required space for installation or ventilation

MIN Depth of the base cabinet niche, including all required space for installation or ventilation

Space in front, which is required to install bottom trim

Indicates whether a ventilation opening is needed or not. Default is "N"

WALL CABINET (vent-shaft incoming)

Indicates the position of the freespace for the inbound airflow (wall cabinet)

Minimum space or inbound ventilation (wall cabinet)

Minimum area for inbound ventilation cavity (wall cabinet)

WALL CABINET (vent-shaft outgoing)

Indicates the position of the freespace for the outbound airflow (wall cabinet)

Minimum space or outbound ventilation (wall cabinet)

Minimum area for outbound ventilation cavity (wall cabinet)

TALL CABINET (vent-shaft incoming)

Indicates the position of the freespace for the inbound airflow (tall cabinet)

Minimum space for inbound ventilation (tall cabinet)

Minimum area for inbound ventilation cavity (tall cabinet)

TALL CABINET (vent-shaft outgoing)

Indicates the position of the freespace for the outbound airflow (tall cabinet)

Minimum space for outbound ventilation (tall cabinet)

Minimum area for outbound ventilation cavity (tall cabinet)

BASE CABINET (vent-shaft incoming)

Indicates the position of the freespace for the inbound airflow (base cabinet)

Minimum space for inbound ventilation (base cabinet)

Minimum area for inbound ventilation cavity (base cabinet)

BASE CABINET (vent-shaft outgoing)

Indicates the position of the freespace for the outbound airflow (base cabinet)

Minimum space for outbound ventilation (base cabinet)

Minimum area for outbound ventilation cavity (base cabinet)

MEASURE

-

0

0

-

0

0

-

0

0

-

0

0

-

0

0

-

0

0 mm cm² mm cm² mm cm² mm cm² mm cm² mm cm²

0 mm

450 mm

450 mm

0 mm

453 mm

453 mm

0 mm

560 mm

560 mm

0 mm

568 mm

568 mm

0 mm

550 mm

550 mm

8

No mm

12NC/Fx: 859991593850 GTIN (EAN) code:

4011577618921

DIMENSION MEASURE

APPLIANCE

Height of the front

Width of the front

Depth of the front

Maximum depth all protruding elements, e.g. handles, controls

Lateral clearance between front edge and most protruding elements which avoid to open a neighbour front more than 90 degrees

Projection of front in relation to housing of appliance

Projection of front in relation to bearing area of the appliance. Taken at minimum height of appliance, if height is adjustable

When product panel is missing, set to 0

Space in front, which is required to guarantee full operability. The most protruding part gives this dimension

Height from bearing area of appliances and lower handle

Frontal handle thickness

Frontal handle width

MIN Height of the product body

MAX Height of the product body

Width of the product body

Depth of the product body

455 mm

595 mm

20

40

0

10

0

97

320 mm mm mm mm mm mm mm

285 mm

30 mm

521 mm

447 mm

447 mm

553 mm

535 mm

Full depth of product excluding protruding interface elements

Minimum height from bottom line hood to top line air outlet

Maximum height from bottom line hood to top line air outlet

Diameter minimum air outlet

Diameter maximum air outlet

Indicates measure between center of air outlet hole and rear wall

Projection of the rear flap in relation to bearing area

Height tube connection for air outlet

Appliance can be used as base for other appliances from the same manufacturer. Default is "No" -

0

0

0

0

0

0

554 mm

0 mm mm mm mm mm mm mm

Appliance Flap door

Projection of the opened flap in relation to bearing area

Maximum angle when flap door is opened totally

Appliance Side swing door

Lateral projection of front incl. controls when door is opened totaly. At the side where the hinge is mounted

Lateral projection of opened front at the side where the hinge is fixed

Maximum angle when door is opened totally

Appliance other

Depth from front end of the niche to the front end of the freespace of the retrace

Height from niche to bottom end of freespace for the retrace

6

85

0

0

0

140

391 mm mm mm mm mm mm mm