advertisement
Micro Motion
™
UL-D-IS Installation
Instructions, MVD
™
Transmitters
Preparation
Installation Manual
20001964, Rev BC
November 2019
Safety messages
Safety messages are provided throughout this manual to protect personnel and equipment. Read each safety message carefully before proceeding to the next step.
Safety and approval information
This Micro Motion product complies with all applicable European directives when properly installed in accordance with the instructions in this manual. Refer to the EU declaration of conformity for directives that apply to this product. The EU declaration of conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available on the internet at www.emerson.com
or through your local Micro Motion support center.
Information affixed to equipment that complies with the Pressure Equipment Directive, can be found on the internet at www.emerson.com
.
For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
Other information
Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the configuration manual. Product data sheets and manuals are available from the Micro Motion web site at www.emerson.com
.
Return policy
Follow Micro Motion procedures when returning equipment. These procedures ensure legal compliance with government transportation agencies and help provide a safe working environment for Micro Motion employees. Micro Motion will not accept your returned equipment if you fail to follow Micro Motion procedures.
Return procedures and forms are available on our web support site at www.emerson.com
, or by phoning the Micro Motion
Customer Service department.
Emerson Flow customer service
Email:
• Worldwide: [email protected]
• Asia-Pacific: [email protected]
Telephone:
Asia Pacific
Australia
New Zealand
800 158 727
099 128 804
North and South America
United States
Canada
800-522-6277
Europe and Middle East
U.K.
+1 303-527-5200 The Netherlands
Mexico
0870 240 1978
+31 (0) 704 136
666
0800 917 901
Argentina
Brazil
+41 (0) 41 7686
111
France
+54 11 4837 7000 Germany
+55 15 3413 8000 Italy
Central & Eastern
Russia/CIS
Egypt
Oman
Qatar
Kuwait
South Africa
0800 182 5347
8008 77334
+41 (0) 41 7686
111
+7 495 995 9559
0800 000 0015
800 70101
431 0044
663 299 01
800 991 390
Saudi Arabia
UAE
800 844 9564
800 0444 0684
India
Pakistan
China
Japan
South Korea
Singapore
Thailand
Malaysia
800 440 1468
888 550 2682
+86 21 2892 9000
+81 3 5769 6803
+82 2 3438 4600
+65 6 777 8211
001 800 441 6426
800 814 008
2
Installation Manual
20001964
Contents
November 2019
Contents
Micro Motion Inc.
iii
Contents
November 2019
Installation Manual
20001964 iv UL-D-IS Installation Instructions
Installation Manual
20001964
1
1.1
1.2
Before you begin
November 2019
Before you begin
About this document
Use this manual to ensure that any applicable Micro Motion flow meter installation complies with Underwriter Laboratories (UL) safety standards.
The information in this document assumes that users understand basic transmitter and sensor installation concepts and procedures.
This manual provides only information associated with installation of transmitters through
UL-D_IS, MVD instructions. For complete information on flow meter installation, see the documentation provided with your sensor and transmitter.
Hazard messages
This document uses the following criteria for hazard messages based on ANSI standards
Z535.6-2011 (R2017).
DANGER
Serious injury or death will occur if a hazardous situation is not avoided.
WARNING
Serious injury or death could occur if a hazardous situation is not avoided.
CAUTION
Minor or moderate injury will or could occur if a hazardous situation is not avoided.
NOTICE
Data loss, property damage, hardware damage, or software damage can occur if a situation is not avoided. There is no credible risk of physical injury.
Physical access
NOTICE
Unauthorized personnel can potentially cause significant damage and/or misconfiguration of end users' equipment. Protect against all intentional or unintentional unauthorized use.
Physical security is an important part of any security program and fundamental to protecting your system. Restrict physical access to protect users' assets. This is true for all systems used within the facility.
Micro Motion Inc.
5
Before you begin
November 2019
1.3
Installation Manual
20001964
Hazardous area installations
If your cable will be installed in a hazardous area, ensure that it meets the hazardous area requirements.
WARNING
Failure to maintain intrinsic safety in a hazardous area could cause an explosion resulting in injury or death.
To keep sensor wiring intrinsically safe:
• Keep intrinsically safe (IS) sensor wiring separate from power supply wiring and output wiring.
• Do not install power cable in the same conduit or cable tray as flow meter cable.
• Use this document with the appropriate approvals documentation. These manuals are shipped with the flow meter or available at www.emerson.com
.
• For hazardous area installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
6 UL-D-IS Installation Instructions
Installation Manual
20001964
2
2.1
1700 and 2700 transmitters
November 2019
1700 and 2700 transmitters
1700 and 2700 transmitter outputs
List of drawings
Transmitter
1700/2700 intrinsically safe outputs
2700 configurable inputs and outputs
Drawing
EB-3600478, Revision DA
EB-3600630, Revision EA
EB-3600666, Revision CA
EB-3600475, Revision G
EB-3600472, Revision G
Micro Motion Inc.
7
1700 and 2700 transmitters
November 2019
2.1.1
1700/2700 mA Outputs
Installation Manual
20001964
8 UL-D-IS Installation Instructions
Installation Manual
20001964
2.1.2
1700/2700 intrinsically safe outputs
1700 and 2700 transmitters
November 2019
Micro Motion Inc.
9
1700 and 2700 transmitters
November 2019
2.1.3
2700 configurable inputs and outputs
Installation Manual
20001964
10 UL-D-IS Installation Instructions
Installation Manual
20001964
2.1.4
1700 and 2700 transmitters
November 2019
1700/2700 F OUNDATION
™ fieldbus outputs
Micro Motion Inc.
G
11
1700 and 2700 transmitters
November 2019
2.1.5
1700/2700 Profibus-PA outputs
Installation Manual
20001964
12 UL-D-IS Installation Instructions
Installation Manual
20001964
2.2
1700 and 2700 transmitters
November 2019
1700/2700 4-wire installations
List of drawings
Installation
1700/2700 4-wire with core processor and sensor
Drawing
EB-3600481, Revision DA
1700/2700 4-wire with core processor and
CMF400 sensor with booster amplifier
1700/2700 4-wire with core processor and D600 sensor
EB-3005809, Revision D
EB-1005075, Revision C
Micro Motion Inc.
13
1700 and 2700 transmitters
November 2019
2.2.1
Installation Manual
20001964
1700/2700 4-wire with core processor and sensor
This drawing does not apply to D600 sensors or CMF400 sensors with a booster amplifier.
14 UL-D-IS Installation Instructions
Installation Manual
20001964
2.2.2
1700 and 2700 transmitters
November 2019
1700/2700 4-wire with core processor and CMF400 sensor with booster amplifier
Micro Motion Inc.
15
1700 and 2700 transmitters
November 2019
2.2.3
Installation Manual
20001964
1700/2700 4-wire with core processor and D600 sensor
16 UL-D-IS Installation Instructions
Installation Manual
20001964
2.3
1700 and 2700 transmitters
November 2019
1700/2700 integral core processor installations
List of drawings
Installation
1700/2700 with integral core processor and
1700/2700 with integral core processor and
1700/2700 with integral core processor and
CMF400 sensor with booster amplifier
1700/2700 with integral core processor and
1700/2700 with integral core processor and DT sensor
Drawing
EB-3600420, Rev EA
EB-3600533, Revision D
EB-3006198, Revision C
EB-1005116, Revision B
EB-3600532 Rev D
Micro Motion Inc.
17
1700 and 2700 transmitters
November 2019
2.3.1
Installation Manual
20001964
1700/2700 with integral core processor and CMF, F, T,
D, or DL sensors
This drawing does not apply to the D600, DT, CMF300A, or CMF400 with booster amplifier sensors.
18 UL-D-IS Installation Instructions
Installation Manual
20001964
2.3.2
1700 and 2700 transmitters
November 2019
1700/2700 with integral core processor and CMF300A sensor
Micro Motion Inc.
19
1700 and 2700 transmitters
November 2019
2.3.3
Installation Manual
20001964
1700/2700 with integral core processor and CMF400 sensor with booster amplifier
20 UL-D-IS Installation Instructions
Installation Manual
20001964
2.3.4
1700 and 2700 transmitters
November 2019
1700/2700 with integral core processor and D600 sensor
Micro Motion Inc.
21
1700 and 2700 transmitters
November 2019
2.3.5
Installation Manual
20001964
1700/2700 with integral core processor and DT sensor
22 UL-D-IS Installation Instructions
Installation Manual
20001964
2.4
1700 and 2700 transmitters
November 2019
1700/2700 remote core processor installations
List of drawings
Installation
1700/2700 with remote core processor and
1700/2700 with remote core processor and
1700/2700 with remote core processor and
CMF400 sensor with booster amplifier
1700/2700 with remote core processor and
1700/2700 with remote core processor and DT sensor
Drawing
EB-3600676 Revision DA
EB-3600678, Revision D
EB-3007060, Revision C
EB-1005118, Revision B
EB-3600677, Revision C
Micro Motion Inc.
23
1700 and 2700 transmitters
November 2019
2.4.1
Installation Manual
20001964
1700/2700 with remote core processor and CMF, F, T, D, or DL sensors
This drawing does not apply to the D600, DT, CMF300A, or CMF400 with booster amplifier sensors.
24 UL-D-IS Installation Instructions
Installation Manual
20001964
2.4.2
1700 and 2700 transmitters
November 2019
1700/2700 with remote core processor and CMF300A sensor
Micro Motion Inc.
25
1700 and 2700 transmitters
November 2019
2.4.3
Installation Manual
20001964
1700/2700 with remote core processor and CMF400 sensor with booster amplifier
26 UL-D-IS Installation Instructions
Installation Manual
20001964
2.4.4
1700 and 2700 transmitters
November 2019
1700/2700 with remote core processor and D600 sensor
Micro Motion Inc.
27
1700 and 2700 transmitters
November 2019
2.4.5
Installation Manual
20001964
1700/2700 with remote core processor and DT sensor
28 UL-D-IS Installation Instructions
Installation Manual
20001964
3
3.1
3500 transmitters
3500 4-wire installations
List of drawings
Installation
3500 4-wire with core processor and sensor
3500 4-wire with core processor and CMF400 sensor with booster amplifier
3500 4-wire with core processor and D600 sensor
Drawing
EB-20000249, Revision BA
EB-20000243, Revision B
EB-20000246, Revision B
3500 transmitters
November 2019
Micro Motion Inc.
29
3500 transmitters
November 2019
3.1.1
Installation Manual
20001964
3500 4-wire with core processor and sensor
This drawing does not apply to D600 sensors or CMF400 sensors with a booster amplifier.
30 UL-D-IS Installation Instructions
Installation Manual
20001964
3.1.2
3500 transmitters
November 2019
3500 4-wire with core processor and CMF400 sensor with booster amplifier
Micro Motion Inc.
31
3500 transmitters
November 2019
3.1.3
Installation Manual
20001964
3500 4-wire with core processor and D600 sensor
32 UL-D-IS Installation Instructions
Installation Manual
20001964
3.2
3500 transmitters
November 2019
3500 remote core processor installations
List of drawings
Installation
3500 with remote core processor and CMF, D,
3500 with remote core processor and CMF300A sensor
3500 with remote core processor and CMF400 sensor with booster amplifier
Drawing
EB-20000234, Revision BA
EB-20000237, Revision C
EB-20000228, Revision B
3500 with remote core processor and D600 sensor
EB-20000231, Revision B
3500 with remote core processor and DT sensor
EB-20000240, Revision B
Micro Motion Inc.
33
3500 transmitters
November 2019
3.2.1
Installation Manual
20001964
3500 with remote core processor and CMF, D, DL, F, or T sensors
This drawing does not apply to the D600, DT, CMF300A, or CMF400 with booster amplifier sensors.
34 UL-D-IS Installation Instructions
Installation Manual
20001964
3.2.2
3500 transmitters
November 2019
3500 with remote core processor and CMF300A sensor
Micro Motion Inc.
35
3500 transmitters
November 2019
3.2.3
Installation Manual
20001964
3500 with remote core processor and CMF400 sensor with booster amplifier
36 UL-D-IS Installation Instructions
Installation Manual
20001964
3.2.4
3500 transmitters
November 2019
3500 with remote core processor and D600 sensor
Micro Motion Inc.
37
3500 transmitters
November 2019
3.2.5
Installation Manual
20001964
3500 with remote core processor and DT sensor
38 UL-D-IS Installation Instructions
Installation Manual
20001964
4
4.1
3700 transmitters
3700 4-wire installations
List of drawings
Installation
3700 4-wire with core processor and sensor
3700 4-wire with core processor and CMF400 sensor with booster amplifier
3700 4-wire with core processor and CMF, F, H,
3700 4-wire with core processor and D600 sensor
Drawing
EB-20000223 Rev BA
EB-20000217, Revision B
EB-20000208, Revision BA
EB-20000220, Revision B
3700 transmitters
November 2019
Micro Motion Inc.
39
3700 transmitters
November 2019
4.1.1
Installation Manual
20001964
3700 4-wire with core processor and sensor
This drawing does not apply to D600 sensors or CMF400 sensors with a booster amplifier.
40 UL-D-IS Installation Instructions
Installation Manual
20001964
4.1.2
3700 transmitters
November 2019
3700 4-wire with core processor and CMF400 sensor with booster amplifier
Micro Motion Inc.
41
3700 transmitters
November 2019
4.1.3
Installation Manual
20001964
3700 4-wire with core processor and CMF, F, H, R, CNF, or T sensors
This drawing does not apply to the CMF300A sensor or to the CMF400 sensor with booster amplifier.
42 UL-D-IS Installation Instructions
Installation Manual
20001964
4.1.4
3700 transmitters
November 2019
3700 4-wire with core processor and D600 sensor
Micro Motion Inc.
43
3700 transmitters
November 2019
4.2
3700 core processor installations
List of drawings
Installation
3700 with core processor and CMF, F, or T sensors
Drawing
EB-3300564, Revision D
3700 with core processor and CMF300A sensor
EB-3002935, Revision F
3700 with core processor and CMF400 sensor with booster amplifier
EB-3005808, Revision C
Installation Manual
20001964
44 UL-D-IS Installation Instructions
Installation Manual
20001964
4.2.1
3700 transmitters
November 2019
3700 with core processor and CMF, F, or T sensors
This drawing does not apply to the CMF300A sensor or to the CMF400 sensor with booster amplifier.
Micro Motion Inc.
45
3700 transmitters
November 2019
4.2.2
Installation Manual
20001964
3700 with core processor and CMF300A sensor
46 UL-D-IS Installation Instructions
Installation Manual
20001964
4.2.3
3700 transmitters
November 2019
3700 with core processor and CMF400 sensor with booster amplifier
Micro Motion Inc.
47
3700 transmitters
November 2019
4.3
Installation Manual
20001964
3700 remote core processor installations
List of drawings
Installation
3700 with remote core processor and CMF, D,
3700 with remote core processor and CMF300A sensor
3700 with remote core processor and CMF400 sensor with booster amplifier
Drawing
EB-20000208, Revision BA
EB-20000211, Revision C
EB-20000202, Revision B
3700 with remote core processor and D600 sensor
EB-20000205, Revision B
3700 with remote core processor and DT sensor
EB-20000214, Revision B
48 UL-D-IS Installation Instructions
Installation Manual
20001964
4.3.1
3700 transmitters
November 2019
3700 with remote core processor and CMF, D, DL, F, H, or T sensors
This drawing does not apply to the D600, DT, CMF300A, or CMF400 with booster amplifier sensors.
Micro Motion Inc.
49
3700 transmitters
November 2019
4.3.2
Installation Manual
20001964
3700 with remote core processor and CMF300A sensor
50 UL-D-IS Installation Instructions
Installation Manual
20001964
4.3.3
3700 transmitters
November 2019
3700 with remote core processor and CMF400 sensor with booster amplifier
Micro Motion Inc.
51
3700 transmitters
November 2019
4.3.4
Installation Manual
20001964
3700 with remote core processor and D600 sensor
52 UL-D-IS Installation Instructions
Installation Manual
20001964
4.3.5
3700 transmitters
November 2019
3700 with remote core processor and DT sensor
Micro Motion Inc.
53
3700 transmitters
November 2019
Installation Manual
20001964
54 UL-D-IS Installation Instructions
Installation Manual
20001964
5
5.1
Booster amplifiers
November 2019
Booster amplifiers
Booster amplifiers with CMF400 sensors
List of drawings
Installation
Booster amplifier with core processor and
Booster amplifier with junction box and CMF400 sensor
Drawing
EB-3005973, Revision D
EB-3005811, Revision D
Micro Motion Inc.
55
Booster amplifiers
November 2019
5.1.1
Installation Manual
20001964
Booster amplifier with core processor and CMF400 sensor
56 UL-D-IS Installation Instructions
Installation Manual
20001964
5.1.2
Booster amplifiers
November 2019
Booster amplifier with junction box and CMF400 sensor
Micro Motion Inc.
57
Booster amplifiers
November 2019
5.2
Booster amplifiers with D600 sensors
List of drawings
Installation
Booster amplifier with core processor and D600 sensor
Booster amplifier with junction box and D600 sensor
Drawing
EB-1005076, Revision C
EB-1005077, Revision C
Installation Manual
20001964
58 UL-D-IS Installation Instructions
Installation Manual
20001964
5.2.1
Booster amplifiers
November 2019
Booster amplifier with core processor and D600 sensor
Micro Motion Inc.
59
Booster amplifiers
November 2019
5.2.2
Installation Manual
20001964
Booster amplifier with junction box and D600 sensor
60 UL-D-IS Installation Instructions
Installation Manual
20001964
6 Direct host 4-wire
Core processor to direct host through a safety barrier
Direct host 4-wire
November 2019
Micro Motion Inc.
61
Micro Motion Inc. USA
Worldwide Headquarters
7070 Winchester Circle
Boulder, Colorado USA 80301
T +1 303-527-5200
T +1 800-522-6277
F +1 303-530-8459 www.emerson.com
Micro Motion Asia
Emerson Automation Solutions
1 Pandan Crescent
Singapore 128461
Republic of Singapore
T +65 6363-7766
F +65 6770-8003
Micro Motion Europe
Emerson Automation Solutions
Neonstraat 1
6718 WX Ede
The Netherlands
T +31 (0) 318 495 555
T +31 (0) 70 413 6666
F +31 (0) 318 495 556 www.emerson.com/nl-nl
Micro Motion United Kingdom
Emerson Automation Solutions
Emerson Process Management Limited
Horsfield Way
Bredbury Industrial Estate
Stockport SK6 2SU U.K.
T +44 0870 240 1978
F +44 0800 966 181
© 2019 Micro Motion, Inc. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Micro Motion, ELITE,
ProLink, MVD and MVD Direct Connect marks are marks of one of the Emerson Automation
Solutions family of companies. All other marks are property of their respective owners.
*20001964*
20001964
Rev. BC
2019
advertisement
Key Features
- Intrinsically safe outputs for use in hazardous areas
- 4-wire installation for easy installation and maintenance
- HART® communication protocol for remote monitoring and control
- Rugged construction for use in harsh environments
- Wide range of input and output options for flexibility
Related manuals
Frequently Answers and Questions
What is the power supply voltage range for the UL-D-IS MVD?
What is the maximum output current for the UL-D-IS MVD?
What is the accuracy of the UL-D-IS MVD?
advertisement