Cuggl Maple Pushchair Instruction Manual

CUGGL PUSHCHAIR PACKAGE MULBERRY

IMPORTANT- KEEP THE INSTRUCTIONS FOR FURTHER REFERENCE 737/7592

Important-Please read the instruction fully before starting assembly

If you need help or have further question, call the Customer Helpline 03456 400 800

Important -Please read the instruction before assembly and keep it for further reference

Thank you for choosing our product. Please always read all the instructions provided carefully before use and remember, your child’s safety may be affected if you do not follow these instructions. The stroller is suitable for children under

36 months. The max load of the stroller is 15kg, never over loaded.

The parking device shall be engaged when placing and removing the children as the baby does not has ability to control its head.

Any load attached to the handle and/or on the back of the backrest and/or on the sides of the pushchair will affect the stability of the pushchair.

Only replacement parts supplied or recommended by the manufacturer/distributor shall be used.

-1-

Name of parts

Canopy

View window

Handle bar

Hand hook

Safety belt

Storage basket

Leg-rest adjustment button

Brake lever

Rear wheel

Front wheel

Components

If you need help or have further question,

call the Customer Helpline 03456 400 800

Please check if you have all the parts listed below before starting assembly

Foot muff Front wheel Raincover

-2-

Attach the swivel wheels by locating the wheel under the frame tube.

Put the wheels upwards until the wheels clicks into position.

(fig 3)

Fix the snap button of the canopy one the each side and the back on the backrest.(fig 3)

-3-

Follow the arrow 1 or arrow 2 to close or open the hood.

Harness & Buckle:

To fasten the waist harness:

Insert both buckle clips into each side of the buckle.

Listen for the “click”.

To release the harness:

Squeeze the buckles and pull apart.

To adjust the buckle:

To adjust the shoulder straps move the slides as shown on. (fig 5)

Note: you can adjust the shoulder straps length according to the baby height.

Step 6

Press the left & right button underneath to lower or raise the leg-rest. (fig 6)

-4-

6

Step 7

Step 8

Lift and hold the seat backrest adjustment lever and move the seat unit upwards or downwards to upright, semi-recline or full recline.

Release the backrest adjustment lever and wait to hear a “click” for each position to lock into place.

-5-

9

8

7

Step 10

Place the raincover over hood and then cover the stroller.

Fasten the hook & loop straps position on the A, B and C as picture show. (fig10)

Step 11

To Fit The Foot Muff

There is belt with button on top of foot muff at both side, put the foot muff on stroller, wrap the belt around the frame tube and then fasten the button.

Belt with button

Foot muff

10

11

Note: always fold the canopy before folding your pushchair

-6-

12

If you need help or have further question, call the Customer Helpline 03456 400 800