X Rocker X-Rocker Adrenaline VII Gaming Chair Instruction Manual

Adrenaline
User Manual Item no: 5150301
Need Help? Email: [email protected]
Phone: 01274 683 109 www.XRockerNation.co.uk
IMPORTANT: You must keep your original retail receipt as proof of purchase.
Welcome to X Rocker!
Thank you for purchasing this X Rocker gaming
chair. You are now close to enhancing your
favourite games with glorious audio!
To get started, please assemble the chair using
the assembly instructions on the separate leaflet
and then follow the instructions in this manual to
get rocking!
Table of contents
2
4
5
6
7
8
9
Box contents and control panel overview
Wired Connection guide: TV (All consoles)
Connect by controller (PS4 systems only)
Bluetooth connection guide: (Mobile phones/tablet devices)
Troubleshooting tips
Health and safety information
Power supply safety information
2
B
B1 - 3m RCA to RCA Audio cable
9.84ft/3m
3.28ft/1m
B2 - 1m 3.5mm to 3.5mm Audio cable
B3 - RCA female to female adapters
+ B1
+ B2
0.492ft/0.15m
+ B3
B4 - 15cm RCA to 3.5mm audio cable
B5 – 15cm 3.5mm to 3.5mm audio cable
B6 – Power Supply Cable
+ B4
0.492ft/0.15m
+ B5
+ B6
Control panel overview
3
Wired connection guide: TV
(All consoles)
TV/Mobile/Tablet
B4
1.
2.
3.
4.
5.
Connect B1 Cable to X Rocker control panel RCA INPUT sockets
Connect B3 RCA adapters to other end of B1 RCA cable
Connect B5 RCA cable to B3 Adapter.
Connect B5 3.5mm end into the headphone socket of your Television
Once connected to your TV, increase volume to 50% of the maximum
for the best sound level.**
*N.B: If your TV does not feature a headphone socket then you may need
to purchase an additional TOSlink adapter to get connected directly to a
console for audio.
**Depending on your TV you may need to Increase the headphone
volume separately in the TV sound settings.
4
Connect by controller:
(PS4 systems only)
B2
1. Connect the B2 cable to the bottom of the PS4 controller via the
headset socket.
2. Connect the other end of the B2 cable to the chair via the green port.
3. With the PS4 turned on and in the main menu, press and hold the
black PS button until the quick menu appears.
4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the setting from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum.
5
Bluetooth connection guide:
(Mobile phones/tablet devices)
Step 1:
Switch the X Rocker X-Pro’s wireless switch to the Bluetooth position.
Step 2:
On the Audio output device
go into its Bluetooth settings,
turn Bluetooth on if it is not
on already and search for
XROCKER. Upon finding this,
select the XROCKER option.
If a passcode is required the four
digit code will be ‘0000’.
6
Troubleshooting tips
Issue
Troubleshooting steps
No power going to control panel
• Make sure that the power cable is
connected correctly.
• Make sure that the power supply at the
power source is working correctly.
• With the chair turned to the ON position,
give the power cable a slight wiggle in the
port. If any lights flicker (or not)
then please contact support (details below).
No sound
• Review the connection methods on
the previous page and try alternative
connection methods if possible.
• Confirm that the device/system is
correctly configured as per previous
connection guide.
• Make sure that the Bluetooth switcher
is in the corresponding position that suits
your connection method. (B for and AUX
for wired connections).”
Bluetooth mode cuts out during
gameplay/No vibration or subwoofer
sound via analogue connection
• Please make sure that the volume of
the source device is at a higher level to
strengthen the audio signal.
The cables connected to my
X Rocker have been broken
accidentally
• Please contact X Rocker support
([email protected]) regarding
this issue.
Interference over wireless connection
• In this case, try another of the three
wireless bands to isolate the signal.
7
Health and safety information
• Avoid immersing or allowing the X Rocker to come into contact
with liquids.
• Please consult X Rocker Support before unscrewing any of the electrical
components on the chair.
• Please be mindful of any cabling laid out between the X Rocker and
power source/audio device.
• Please be mindful of cabling attached when moving/swivelling
the X Rocker.
• If the cables or electrical equipment are broken then this may present
a choking risk, please contact Support for replacements and dispose of
these parts safely.
• Do not stand on the X Rocker or exceed the 120kg weight limit via
other means.
• Do not lean back on the chair to the point in which the pedestal would
lift off the ground.
• X Rocker armrests are designed for support and comfort during
gameplay, please do not use these as support for getting in/out of
the chair.
• Playing audio for long periods at loud volumes may contribute to
difficulties in hearing.
• Please be considerate to others when playing audio through the
X Rocker speakers at higher volumes.
8
Power supply safety information
9
Need Help? Email: [email protected]
Phone: 01274 683 109
www.XRockerNation.co.uk
IMPORTANT: You must keep your original retail
receipt as proof of purchase.