Pentax EI-200 Operating Manual

ENTAX
EI-200
OPERATING MANUAL
QS Lice
es ‘Le
< Ap
m Digitar
In The Beginning
Thank you very much for buying the Pentax El-200 digital camera. Please read this
document before use in order to make the most of this product's functions and keep it safe
after reading. This document will prove very useful if you do not understand how to use
the camera or wish to know more about the functions.
Regarding copyrights
Images taken using the El-200 that are for anything other than personal enjoyment cannot
be used without permission according to the rights as specified in the Copyright Act.
Please take care, as there are even cases where limitations are placed on taking pictures
even for personal enjoyment during demonstrations, industrial enterprise or as items for
display. Images taken with the purpose of obtaining copyrights also cannot be used
outside the scope of use of the copyright as laid out in the Copyright Act, and care should
be taken here also.
Regarding trademarks
+ HP, HP Imaging Technology, HP JetSend and Hewlett-Packard are trademarks of
Hewlett-PackardCompany.
* FlashPoint, Digita, Digita Desktop, Digita-Digita Desktop and Digita Script are
trademarks of FlashPoint Technology, Inc..
* Adobe and Adobe Photoshop are trademarks of Adobe Systems Incorporated.
* CompactFlash and CF are trademarks of SanDisk Corporation.
* All other brands or product names are trademarks or registered trademarks of their
respective companies.
* There is a possibility that recorded data may be erased or that the camera may not
function correctly when used in surroundings such as installations generating strong
electromagnetic radiation or magnetic fields.
* The liquid crystal panel used in the LCD display is manufactured using extremely high
precision technology. Although the level of functioning pixels is 99.99% or better, you
should be aware that 0.01% of fewer of the pixels may not illuminate or may illuminate
when they should not. However, this has no effect on the recorded image.
The camera may not operate correctly in locations where strong electrical or magnetic
fields are present.
FOR SAFE USE OF YOUR CAMERA
Sufficient attention has been paid to the safety of this product but please pay particular
attention to the warnings indicated by the following symbols during use.
These symbols indicate that it is possible that the user may
AWa rn | n g experience serious difficulties if the warnings are not
heeded.
These symbols indicate that it is possible that the user
| A Cauti on may experience minor or middling difficulties or physical
difficulties if the warnings are not heeded.
O is a symbol indicating items that are prohibited.
AN is a symbol emphasizing a warning.
O Do not attempt to take the camera apart or remodel the camera. High
voltages are present within the camera, and there is therefore a danger of
electric shocks.
If the inside of the camera should become exposed as a result of, for example,
the camera being dropped, please do not under any circumstances touch such
exposed portions, as there is a danger of receiving an electric shock.
Wrapping the strap of the camera around your neck is also dangerous, and
please take care that small children do not hang the strap around their necks.
with this product. The use of an AC adapter other than that specified exclu-
sively for use with this product may cause fire or electric shocks.
Stop using the product if the AC adapter emits noise during use, as there is a
Q Use an AC adapter that is of the power and voltage specified for exclusive use
O danger of receiving an electric shock.
Tiene
E NE
Do not attempt to touch the product, should the product catch fire due to a
battery short, etc, and do not attempt to disassemble or charge the battery at
such times, as there is a danger of the product bursting into flames.
extract the battery as soon as possible, taking great care not to get burnt at
such times.
Some portions of the camera heat up during use, so please take care, as there is a
WN On the other hand, should the camera battery explode or start smoking,
O risk of low temperature burns if such portions are held for long periods of time.
Care tobe taken during handling
* Do not clean the product with organic solvents such as thinner or alcohol
benzine.
* Places of high temperature and humidity should be avoided. Particular care
should be taken regarding vehicles, which can become very hot inside.
* Do not store the camera where pesticides and chemicals are handled should be
avoided. Remove from case and store in a well-ventilated place to prevent the
camera from becoming moldy during storage.
* Do not use the camera where it may come in contact with rain, water, or any
other liquid, because the camera is not weather, water, or liquid resistant.
Should the camera get wet from rain, splashing water, or any other liquid wipe
it off immediately with a dry soft cloth.
* Ensure that the camera is not subjected to substantial vibrational shocks or
pressure, Place the camera on a cushion for protection when the camera is
subjected to the vibrations of a motorbike, car, or ship, etc.
* The liquid crystal display will become black at temperatures of approximately
60°c but will return to normal when normal temperatures are returned to.
The display response speed of the liquid crystal becomes slow at low tempera-
tures but this is due to the characteristic of the liquid crystal and is not a fault.
* Remove dust from the lens viewfinder using a blower or clean off dust using a
lens brush.
* Periodic checks are recommended every 1 to 2 years in order to maintain high-
performance.
* When the camera has not been used for a long time, please, without fail, try out
the camera to confirm that it is still working properly, particularly prior to
taking important pictures (such as at a wedding or during travelling). No
guarantee can be given with regards to collateral damage (costs incurred as a
result of taking pictures, loss of benefits that were to be obtained through
taking pictures) that may cause this product to fail.
* If the camera is subjected to rapid temperature changes, drops of water appear
on the inside and outside of the camera. Therefore put the camera in a bag or
plastic bag, and take the camera out when the difference in temperature has
subsided.
* The temperature range in which the camera can be used is O°c to 40°c.
* Take care to ensure that garbage, dirt, sand, dust, water, toxic gases, salt, etc.
do not enter within the camera, as this may cause the camera to become
damaged. If rain or drops of water get onto the camera, please wipe dry.
* When the batteries are changed as a result of liquid being spilled, etc., batteries
of the same make and of the same type should be used, and care should be
taken not to mix up the new batteries and the old batteries.
E
How to use this operating manual.
Setup guide |
Setup Guide В
PENTAX
El-200
This is a description of the simplest way of taking pictures after preparing
the camera.
- Basic ope
This is a description functions for general use.
e Taking pictures .. . This is a description of the basic operation when
taking one picture at a time from the point of view of the display panel.
e Representing pictures that have been taken … this is a description of
the method of operation from the point of view of taking pictures.
e Deleting unrequired pictures . . . this describes a method of lining up
the pictures for checking and deleting unrequired pictures.
* How to take good pictures . . . This is a description of useful functions
for making full use of the functions of this camera in line with conditions
for taking pictures and the circumstances in which the camera is used.
nm
This is a detailed description of how to use each function in order to make
full use of the functions of this camera.
« Capture Mode . . . preferences (recording method, exposure and ISO
— speed, and camera preferences etc.) for continuous shooting, timelapse
shooting, audio recording, date and text stamping, and other types of
preferences.
» Presentation Mode . . . Slideshow (continuous displaying), slideshow
preferences. |
e Review Mode . . . Deletion, classification and retrieval of pictures.
*e Use with other equipment . . . Direct printing to printers, displaying on a
television, connection with personal computers.
Contents
Flash mode button for setting the flash Mode 29
Taking pictures using self-timer or remote control... 30
Adjusting focus range. Macro/Infinity button 32
Zoom lever for setting the focus range to the telephoto
setting and the wide-angle setting ................ neos 34
Using the diopter to adjust viewfinder visibility. ........................... 37
Setting Video Output Format cc one 38
Summary of Step-up Operation: …….….…..…..….…..……csseereeeneaees 40
Using Various Functions
About The Various Capture Methods ers 46
Taking pictures in continuous shooting mode 47
Taking designated number of pictures
at regular interval -Timelapse shooting mode- 48
Sound recording for a captured picture - Sound Recording ......... 50
Setting File Settings
Setting save format and size of image - File Setting ..................... 52
Setting Exposure, White Balance And ISO Speed
Setting exposure mode according to subject - Exposure ............. 54
Exposure adjustment for whole photo - EV Compensation ............ 56
Adjusting color balance according to lighting - White Balance ....57
Manual focus - AF/MF Focus Mode... rain 58
AE Metering range setting for determining exposure
- AE Metering e nneaeeeer remeros. 60
ISO speed setting - ISO Speed... eee 61
FOR SAFE USE OF YOUR CAMERA .......... Denia en nana aaa 1
Care to be taken during handling... rene 2
How to use this operating manual... rai ares 3
Part Names EEE RS 6
Outline of Basic Operation ……………..........……..…...….…rressssensecssarrennnes 10
Mastering the basics
Taking pictures
How to take pictures aa eeienererere aereo. 12
Comparing pictures, and deleting unnecessary pictures
Check pictures taken aaa ee ee rerias 17
Deleting Unnecessary Pictures ...... rene ne 18
Presenting pictures on a television
Get the television ready for viewing... eii 20
Representing pictures on a television 20e 21
How to use the camera
Regarding the battery
Checking байегу 1еме! ea nia arenero. 22
Changing the Batteries ina erario, 23
Regarding memory cards
Check memory card capacity eiii ear a reee 25
Changing the memory Card inaaeen ear ree 26
How to take good pictures
Using the function buttons
Stamping Date & Time And Text On A Picture
How to set the date and time of shooting to be stampe
_ on a picture - date and time .......................e=..—— rere 62
How to set your favorite phrase to be stamped
ona Picture -1eXt . ooo, 64
How to set a logo to be stamped on a picture - Logo teres 68
Changing The Settings Of Functions Of The Camera
Changing the display state of the LCD monitor - Display ............. 70
Changing the playback volume and function sound - Sound ....... 72
Erasing all the data in the memory card - Formatting the card ..... 74
Setting the display mode of the date - Set date and time ............. 74
Setting the method for numbering pictures — |
- Image numbering method ...................... 2... 76
Naming the camera - Camera name ........................00000000 0 77
Specifying the language displayed - Language ................cc....... 79
Resetting the setting of the camera to the initial state - All reset... 80
Application For Review Mode Function
Playing Pictures One By One . .... 82
Continuous Play With Automatic Switching ..........--.- =>... 84
Displaying picture as slideshow (Continuous play) ....................—.- 85
Playing pictures taken in Timelapse Shooting Mode or pictures
grouped continuously and automatically .......................—..—.——. 88
Arranging Picture With Review Mode
Basic Operation For Review Mode
Checking pictures оп a list .....................e2eee EEK NEE EEK EEE 92
Sound recording ................=.... EEE EEE R EEE ER EREKRRR RER KREEEE EEK KEN EEE EEE 94
Deleting Picture Taken
Delete pictures taken one by one ........................meeceerierner e EEE 95
Deleting selected pictures .........................20 0000 EEK 96
Making it impossible to delete pictures - Protection ..................... 98
Categorizing Pictures
Classifying pictures by category - Category ......................————.. 102
Group classification - Group .............e.....22e eee 103
Searching Taken Pictures
Searching picture by date 2er KERNE EEE EEE 110
Searching by Category ……….…….…….……rircrrnensen serense crane cen eee 112
Printing Or Other Processes Using Other Devices
Printing The Pictures You Have Taken
Print order using DPOF compatibility cr 116
Printing using a JetSend compatible printer ................... ees 121
Viewing And Processing The Pictures You Have Taken
On APC
Before connecting the camera and a PC ere 124
Setting the PC connect mode ...................e..e0 es 125
Connecting with a PC... reer 126
Transmitting/Receiving Pictures To/From Other Cameras
Having Digita Installed
To transmit pictures ...............—...—. ates 127
To receive pictures... Garteen nanas eee 129
Running À Script. .... 131
Error/Alert Message Table cenrrnennanoconnenns 134
Specifications Table 136
Part Names
Infrared data transmitter
Remote control receiver
Self-timer lamp
+= а
EFT ERS Built-in flash
(ToC 21>
Shutter release button Umm A
Strap lug
Lens
Microphone
Mode dial
E Capture Mode ... .... pictures are taken
(>) Presentation Mode captured sourd and pictures are presented one at a
time or presented as a shdesnow. either or a camera
or by connection with a te-evision. ESE” p 20, 81
2 Review Mode ...... . pictures saved to the memory card can be
LCD panel displayed next to each other. Pictures that are nc
The LCD panet shows the remaining longer required can then ce deleted, or pictures
battery power. the flash preferences. the can be grouped together tb p.17. 45
number of images that may be taken, and PC PC Connect Mode .. editing can be carned out by connecting with a
the macro/infinity preferences personal computer Es” p.125
f
!
/ | (CN \
= omega | СПИД) = оное
; | = 0
Flash mode button — : Power switch Zoom lever
1s ts pressed when setting flash mode such as tar p.34
red-eye reduction and slow speed shutter mode. or oo
whether or not to use the flash ESF р.29 Macro/infinity button
Press this button to take pictures using
the macro(close range infinity mode.
Timer button p.32
Press this button to set the mode for taking pictures
using the self timer or wireless remote control.
5 p.30
Card access lamp
The card access lamp blinks when data is saved to
the memory card. Under no circumstances is the Green lamp
memory card to be removed while the card access The green lamp lights when the camera is in focus
lamp is blinking. with the shutter half-pressed.
Red lamp
The red lamp lights when the flash is on,
Diopter adjustment dial !
tE p.37 and blinks during charging.
Sound record button r p.50, 94
Viewfinder
LCD monitor
The LCD monitor displays photographed
subiects, displays pictures taken using the
“presentation or editing functions, and displays
select/preferences using the menu. '
Display button
This is pressed when taking pictures
while displaying the subject on an
LCD monitor,
Menu button
Speaker When the menu button is pressed
using the capture or presentation
functions, a menu of the preferences
possible for each function is
, displayed.
Transmit
button Battery chamber cover release lever
E p.xx
Battery chamber cover
Four-way Controller
The four-way controller is for selecting functions from
the menu, and changing over the pictures displayed Left Soft Key/Middie Soft Key/Right Soft Key
using the playback or editing functions. These keys are pressed when selecting the soft key
displayed at the lower part of the LCD monitor.
Tripod socket
CF card cover
AV output terminal
Captured pictures and sound can be presented on a television etc. by
connecting the camera to a video terminal of a television etc. using a video
cable. E" p.20
DC input terminal
Power can be supplied from an AC power supply by connecting with an
AC adapter (sold separately).
USB connector
Pictures that have been taken can be transmitted to a personal computer
by connecting the camera to a personal computer using a USB cable.
LE” p.126
Side cover
Specifying the language displayed - Language
Please read this page with regards to displaying languages other than English.
1 Displaying the language screen
11: Turn on the power to set the mode dial to the capture
mode mark.
2. Press the menu button to display the [Capture
Settings] menu.
13" Press the right key on the four-way controller three
times to display the [Preferences] menu.
:4: Press the down arrow on the four-way controller
seven times to highlight the [Language] menu.
‘5 Press the left soft key to select the soft menu [Edit].
The [Language] screen appears on the display.
2 Setting the language
1 Press the down arrow on the four-way controller to
highlight the language to be set.
[English]... A menu or message is displayed in
English.
2! Pressing the left soft key to select the soft menu
[Select] will return the system to the [Preferences]
menu.
A menu or message is displayed in the language set.
3" Press the right soft key to select the soft menu [Exit].
Out of Basic Operation
Taking pictures .…..…..….….…..……erennenennennennsnnmnnnnennnenn+n*s 12
Comparing pictures,
and deleting unnecessary pictures нение 17
Representing pictures on a television... Er 20
How to use the camera
'Regarding batteries ......................enmenn 22
Regarding memory cards ..................emevenenee ress, 26
How to take good pictures
Using the function buttons ....................m.e.ee ee 29
eThe flash mode button for changing the flash mode
e The timer button for taking pictures using the self-timer or
the remote control |
eThe macro/infinity button for adjusting focussing range
e Adjusting the viewfinder
Setting Video Output Format................ eee eeer aerate sate ere nanan 38
F WOT OE ES ввезено сене теней ванна ABR LLE
г
+
;
- Outline of Basic Operation
x
» This is a brief introduction of the contents described in the basic operation.
+ Please refer to the respective pages for more details of the operating methods.
E
*
> Capture Mode
: Taking pictures
? Introduces the specific operations
. for functions that are particularly useful
a when taking pictures.
=
: Basic operation when taking pictures. r& p.12
A À description of how to get ready to take pictures and how to take pictures.
‘ Taking good pictures.
. Introduction of some functions that may be of some use when taking pictures.
Е ® Flash preferences t&7 p.29
. Red-eye can be reduced when the flash goes off and the backgrounds of
e people can be exposed properly when taking pictures at night.
= ® Adjusting the range of focus tE” p.32
> The range of focus can be adjusted when taking pictures by pressing the
+ macro/infinity button.
. ®Macro
e This is set when taking close-ups of subjects such as flowers, and
: pictures can be taken at distances as close as 10cm to the subject.
w e Infinity
4 This is set when it is wished to take pictures of scenery etc. through
; glass or netting without focussing on the glass or netting.
+ e Taking pictures using the self-timer or remote control I p.30
4 This is set when taking pictures of the whole family using a tripod using
a the timer or using the remote control unit accessory.
e e Adjusting viewfinder visibility. tE” p.37
3 The viewfinder visibility is adjusted with the diopter adjustment dial.
oe
: Setting Video Output Format. 1& p.38
a Select a video output format NTSC or PAL.
CS arsrcorertesicaa:e onarnciocrona€ darcuoAvoame?v ddooao
10
8065806095 95608SÉ6 096659090666 600960906090 8 G06G0C00 800 DSOSE
R eview M o de | e - De
- Checking pictures taken
o - troduction of functions for editing pictures.
- Displaying pictures on the LCD monitor. (#7 p.17
Displaying pictures saved to the memory card on the LCD monitor.
Deleting unnecessary pictures. rt p.18
Deleting of unnecessary pictures displayed on the LCD monitor.
Pre: resentation Mode
; Presenting pictures taken
- on a television
= Pictures a can n be presented on a television screen for your enjoyment.
Connecting to a television. I” p.20
A description of how to connect the camera and a television.
Representing on a television. t& p.21
How to display pictures on a television is described.
lee 0 ODO CEO 00GCE000000¢066890OIDPOBREREIVOIITT
e
aa?
®0a0528602060000009069D00998000986000099200090000090990.06090OA00 #60 G 60°
—
—
Taking pictures
How to take pictures
Pictures are taken by carrying out the following steps.
Wr
Get the camera ready
.1:Put the batteries in.
(2:1nstail the memory card.
(see setup guide for how to insert the memory card)
A memory card should be loaded or replaced in a
power off state.
A
Turn on the power supply
and select the capture
function
.1-Move the power switch to the right to put on the power
supply.
(2Rotate the mode dial so as to line up the capture mode
symbol [4] with the black line.
Mode dial
Power switch
Zoom lever
Display button
;
SN Reference
Please set up the date and time by referring to the set
up guide when the date and time screen is displayed.
Please read ESE" p.8 with regards to displaying
languages other than English on the LCD monitor.
+ Taking pictures while looking at the LCD monitor
When the display button is pressed, the subject is displayed
on the LCD monitor. Please take care, however, as battery
consumption is substantial when pictures are taken while
displaying the subject on the LCD monitor. ES” p.16
A
Confirming the LCD panel
J'Confirm the LCD panel. When nothing is set, the LCD
panel displays the battery symbol and the number of
pictures that can be taken.
i 8 u Exposure Counter
È This displays the number of pictures
| that can be taken with the memory
card that 1s installed
Battery Level
Displays the amount of power remaining for the battery
Regarding the displaying of remaining power. T&F p.22
Taking Picturs
LCD panel and Preferences
When symbols other than the battery symbol and the symbol indicating the number
of pictures that can be taken are displayed at the LCD panel, the flash mode button, timer
button, or macrofinfinity button is pressed.
| — Macro/Infinity preferences
display area
This shows how the focussing range
is set. When nothing is displayed,
pictures are taken using the
autofocus. When the macrofinfinity
button is pressed, pictures can be
taken with the focus at macro (taking
. pictures close up) or infinity. 1” p.32
Display area for flash
preferences
The flash preferences are
displayed. When nothing is
displayed, the flash fires as
necessary. When the flash
mode button is pressed, the
presence of the flash or
red-eye reduction, etc. can
be set. IS” p.29
=
jab)
wn
—
D
=.
=
©
и
=
(D
с
jul]
о,
с
0
13
Flash Timer Macro/ ,
mode button infinity Display area for timer
button button preferences
This displays the states of the timer
preferences. The timer button can
change over between a self-timer and
a remote control operation. ES” p.30
Ds (DLook through the viewfinder so that the subject can be
AA A ae . seen in the viewfinder.
Viewing a subject with The AF frame [ ] at the center of the viewfinder is the
the viewfinder range where the subject is focussed automatically.
a Please place the subject to be focussed on the AF
frame [ |.
Please put the portion to be
focussed on the AF frame.
When you move the zoom lever to the right, the lens
moves towards the telephoto setting and frames the
subject more closely. When you move the zoom lever to
the left, the lens moves towards the wide-angle setting.
4 `
AX CI y» ONOFF
(CT>- Zoom lever
a -
It is possible to change the focus range to the telephoto setting and the wide-angle setting with
the zoom lever. This camera has a digital zoom function, so it is also possible to expand the
magnification range of pictures to 1.2 x, 1.5 x, or 2 x when you are shooting a subject through
the LCD monitor.
À
Regarding the automatic picture orientation detecting and switching function.
The automatic picture orientation detecting and switching function can detect the
orientation when you hold the camera and save the picture taken vertically as a vertical
picture. This makes it possible to prevent image deterioration from occurring by turning
the image round and resaving in JPEG format using picture processing software on a
computer.
A picture captured vertically. The picture is automatically
switched to a vertical picture
The picture is turned round using picture processing software
and saved in JPEG format — image deterioration.
A
The shutter release button is lightly pressed, so as to
When the shutter release be pushed in half-way.
button is pressed in The green lamp beside the viewfinder lights up, and
half-way the focus and brightness (exposure) are stored. The
red lamp also lights up when a flash fires. The half-
pressed state is released when a finger is taken away
from the shutter button in the half-pressed state.
| Green lamp
= Red lamp
14
Taking Picturs
A
(With the green lamp lit up, the shutter is pressed
O ‘completely so that a picture is taken.
Taking a picture There is then a click, and a picture is taken.
Mp 1 TS At this time, a flash fires if the red lamp is lit.
When a lamp is blinking
When the green lamp is blinking, then the camera is not in focus. The shutter will be
released in these circumstances but the camera will not be in focus.
When the red lamp is blinking, charging of the flash is incomplete and the shutter cannot
be released. Please therefore wait for the light to come on, and then press the shutter
release button.
<
5
о
—
CD
=
=
to
—
=
“D
<
QO
O.
©
A
15
- 3 Card access lamp blinks while a picture taken is stored
ei mite : in a memory card and then you are ready to take a next
To decide whether or not to picture. у у у
keep pictures + Quick review monitor
io After a picture is taken, the picture is displayed on the
LCD monitor for a few seconds.
DDD J
J
x A
Left soft key —— Right soft key
Middle soft key
NN Reference
This screen is referred to as an instant review screen, and is initially set to display for three
seconds. The display time is set using the [Preferences]. It can also be arranged for the instant
review screen not to be displayed. IE” p.70
+ Saving a picture in a memory card. |
Press the right soft key, and select [exit] displayed on the LCD monitor.
The picture is stored in the memory card, and the number of pictures that can be taken is reduced.
>
\ Reference
Pictures can also be automatically saved when the LCD monitor is turned off without pressing
the right soft key when saving.
4 Deleting a picture.
Press the middle soft key while the picture is displayed on the LCD monitor and select [Delete].
If the message [Delete?] is displayed, quickly press the left soft key, and select [Delete].
fo,
SN Reference
Pictures that are taken can be deleted using the review mode operation. Please then look
carefully at pictures that have been taken so as to determine whether or not to delete such
pictures, and delete pictures in Review mode. E” p.95
Taking pictures when displaying at the LCD monitor
e Displaying at the LCD monitor
Press the display button when taking pictures while displaying the subject at the LCD
monitor.
When the subject it is wished to take pictures of is displayed at the LCD monitor and
[Ready] is displayed, the picture can be taken.
State Display Area
Messages such as [Ready]. and preference conditions such as
macro (a tulip symbol), infinity. and zero self timer are displayed.
Г 99 E >
O
Live view Screen
Display Button
Soft Key Display Area
« > > Co
|
eu
e)
NM TA
* Please take care because taking pictures with the live view screen displayed
uses up the batteries.
* The initial preferences are such that the live view screen is not displayed when
the power supply is turned on. Please set the [Preferences] in order to display
the live view screen when the power supply is turned on. [& p.70
+Operation of The Soft Keys of the Live view Screen
The soft keys are displayed at the live view screen. The following operations can be
executed by selecting each of the soft keys.
* Left Soft Key [One shot]... The capture method can be changed over between [One shot],
[Continuous] and [Timelapse] by pressing the left soft key.
Regarding continuous shooting . [8 p.47
Regarding timelapse shooting. ESB” p.48
* Middle Soft Key [Overlay]... The state display area and soft key can be displayed or not
displayed on the LCD monitor by pressing the middle soft key.
* Right Soft Key [Status]... The status screen can be displayed and the current capturing
conditions such as the recording size and image quality etc. can be confirmed.
Ne
Resolution: Full Size
Quality: Better
White Balance: Auto
16
Comparing pictures, and deleting unnecessary pictures
Check pictures taken
о Check pictures taken using the LCD monitor.
@Confirm that the memory card is installed.
Turn on power supply and Move the power switch to the right and turn on power
Parr oe | supply.
(3) Rotate mode dial and line up the Review mode symbol
with black line.
enter review mode
Display pictures saved on the memory card at the LCD
monitor.
Cursor
Using the right and left keys of the four-
way controller, move the picture of interest
to the cursor.
Summary Display Area
Up to four saved pictures can be displayed.
Enlargement Display Area
The picture al which the cursor is positioned is
enlarged.
Soft Key Display Area
Soft keys that can be used with editing
functions such as [Select]/[Unmark], [Delete],
[Expand], (Collapse) (when putting into
groups) etc. are displayed. Preference Information Icon Display Area
One shot, continuous, timelapse, group and
— category preference information is displayed
using icons.
Basic Data Display Area
Displays picture number, date and time, and group.
<
{0
wn
—
CD
=.
3
«©
—
=
a
о
a
D,
e
CA
17
v
1:Press 4 and > of the four-way controller and move the
picture you wish to enlarge to the cursor.
Looking at Pictures The picture at the cursor position is enlarged.
|
п < с с
À
J
Deleting Unnecessary Pictures
w
‘Turn on the power switch and select the review mode.
The method of operation is [check pictures taken]
Put into review mode Eb p.17
à
‘Press 4 and P of the four-way controller and move the
picture you wish to delete to the cursor.
Moving the cursor to The picture at the cursor position is deleted.
unrequired pictures
A
'1:Press the middle soft key and select [Delete].
A message confirming deletion is displayed.
Deleting Pictures
¢ When deleting
Press the left soft key and select [Delete].
+ When a delete is cancelled
Press the right soft key and select [Cancel].
18
Comparing pictures, and deleting unnecessary pictures / Edit mode
Regarding other review mode functions
* To delete a number of pictures at the same time, select the pictures you wish to delete,
and select [Delete] from the menu. ESE” p.96
* When the group function is used, the selected pictures can be collected into one group,
given a name, and saved. Pictures in the group can be retrieved using the group name.
LU” p.103 >
* When a function of a particular category is used, the selected picture is classified by
being given an icon of that particular category. The picture with the assigned category
can then be retrieved from that particular category. ES” p.102
<
{о
52
—
o
=.
=
©
i
=
®
с
QO
©.
©
©
19
Presenting pictures on a television
Presentation mode
Get the television ready for viewing
Connect the camera and television together using a video cable in order to show pictures on a television.
1: Turn the camera power supply off.
Connect the video cable to 2'Open the side cover, and attach the video cable
the camera connector to the AV output terminal.
TY
и
т т
|_—— Side Cover
— AY Output Terminal
|_— Video Cable
| TCheck that the television power supply is off.
Connect the video cable to ?Connect the video connector (yellow) of the video
cable to the video input termina! (yellow) of the
the television television.
‘3:Connect the audio connector (red) of the video cable
to the audio input terminal (mono) of the television.
fv)
\ Reference
Please refer to the television user guide with regards to
connection to the output terminal.
-1:Turn on the camera power supply.
Presentation Mode for '2:Turn on the television power supply and select the
| a id |
Presentation on a Television video screen
№
©, Reference
Refer to the television user guide with regards to the
method of displaying the video screen.
20
Representing pictures on a television
Representing pictures on a television
y - When representing pictures on a television, confirm the video output format (NTSC, PAL).
; - Regarding the video out setting, please refer to page 38.
VW
(Turn on the power switch of the camera, rotate the
ETE mode dial, and line up the presentation mode symbo
“Put info with the black line. |
Presentation Mode
Pictures displayed on the memory card are then
displayed on the television.
88/4/25 12:22
-
MWhen 4 and > keys of the four-way controller are
pressed, the pictures are changed over.
the pictures
Press the middle soft key when it is wished to enlarge
the displayed picture.
fa)
S Reference
Regarding the presentation mode function.
There is also a slideshow function for automatically changing over screens provided in the
presentation mode function. In the slideshow function, the display interval and the displayed
pictures can be displayed by category. 188” р.85 21
=
O
mn
—
©
=.
=
©
—
=
(D
с
с
2.
o
©
22
Regarding the battery
Checking battery level
The battery level can be checked using the LCD panel. Please install a new battery when there is
only a small amount of battery power remaining.
fu]
N Reference
A large amount of battery power will be consumed if
pictures are taken while displaying pictures on the LCD
monitor or after continuous use of the LCD monitor in
review mode or presentation mode. It is therefore
recommended that an AC adapter (sold separately) be
employed when using the LCD monitor in review mode
and presentation mode.
However, please ensure that the camera power supply
is turned off when connecting this AC adapter.
“ЧР
Getting the camera ready
‘J‘Check that the battery and the memory card are
installed.
‘2Turn the power supply on. The battery level is then
displayed at the LCD panel.
80
Uy
* Regarding displaying of the battery level
The battery level can be checked using the battery
symbol displayed at the LCD panel.
Battery Symbol |
When the battery symbol is completely filled in,
M there is still sufficient battery power remaining.
When the battery symbol is half-filled in, only half
A or less of the battery power is remaining.
When just the frame the battery symbol remains
| illuminated, the batteries are low. In this case,
please get some new batteries ready.
When just the frame of the battery symbol
r remains and is blinking, this will flash for three
I second and the power supply will then go off. In
this case, please replace the batteries with new
batteries.
Regarding the battery
2
S. Reference
e The batteries are low when [Battery low] is displayed
on the LCD monitor when the LCD monitor is being
used. In this case, please get some new batteries
ready.
e When the message [Batteries depleted] is displayed
on the LCD monitor when the LCD monitor is being
used, the battery symbol will flash for three seconds
and the power supply will then go off. in this case,
please replace the batteries with new batteries.
Changing the Batteries
: When the batteries run out, please replace with new batteries.
le)
AN Reference |
Please use AA -size lithium batteries, AA -size nickel
metal hydride rechargeable batteries, or AA -size
alkaline batteries.
Ll
oO
=
—
e
с
mn
«D
=
=
@
©
oO
3
D
=
№
23
hä
[Open the battery chamber cover at the bottom of the
ET с, camera and open the battery chamber cover as shown
Changing the batteries in the drawing.
Olnsert the batteries as shown in the drawing.
24
'3:Firmly close the battery chamber cover and shift the
battery chamber cover lever as shown in the drawing.
* If the day and time preference screen is displayed
When the day and time preference screen is displayed
after changing the batteries, please set the day and time
in accordance with the operation in the [Setup guide].
Regarding Battery Handling
* Performance falls when the camera is used in low temperatures and it may become easy for
the [Battery low] message to be displayed on the display panel and the LCD monitor. It is
therefore advisable to keep new batteries ready so that the batteries can soon be changed
when using the camera in low temperatures. Lowering of the performance during use can
be prevented by warming up the replacement batteries. AA -size lithium batteries are
recommended for use in cold regions,
* Please store the camera with the batteries removed if the camera is not to be used for a long
period of time. If the camera is stored with the batteries in, the batteries may leak and cause
damage to the battery chamber of the camera.
+ When alkaline batteries are used, there may be cases where the remaining battery charge is
displayed as being low even when new batteries are installed, due to the properties,
temperature and storing method of such batteries. In such cases, the remaining battery
charge will be restored after using for a short period of time, and the remaining battery
power will be displayed in a normal manner.
Regarding memory cards
Check memory card capacity
Check that the battery and memory card are fitted.
@Turn the power switch on. The number of pictures that
G etting the camera ready can be taken is displayed on the display panel.
SRT Gé CIT
i г Í L { Exposure counter
€ Exposure counter
» The number of pictures that can be taken is reduced
every time a picture is taken.
Also, the number of pictures that can be taken is
increased by one each time pictures not required are
deleted by the review function .
When the number of pictures that can be taken becomes
[0] and a light blinks, please replace memory card or
delete unneeded pictures ( KE p.26, 95).
e When using an LCD monitor, if a [Not Enough Memory]
message is displayed please replace memory card or
delete unneeded pictures ( 183” p.26, 95).
* The displayed number of pictures that can be taken is
different depending on image size, image quality and
memory card capacity |
( t@ p.53). Please use the following table as a guideline.
=
о
=
—+
=)
<
©
D
>
Ф
©
su
3
MD
—
®
25
+ The following table is for using the camera with an SMB
memory card. [Good], [Better] and [Best] are com-
pressed and save in JPEG format. TIFF is saved in
uncompressed form in the TIFF format.
E de ale Setter ue ; - Best e TIFF: a
1/4 image size (800 x 600) approx. 82 pictures | approx. 50 pictures | approx. 28 pictures approx. 5
or more or more or more pictures
Full image size (1600 x 1200) | approx. 27 pictures | approx. 14 pictures | approx. 7 pictures approx. 1
or more or more or more pictures
26
Regarding number of pictures that can be taken. Image size/quality
* Image size is the resolution when a picture is taken. The higher the resolution, the larger
the amount of memory used. Image size setting ES” p.53
* Image quality involves a sequentially lower compression rate in the order good, better,
best. The lower the compression ratio, the larger the amount of memory required when
saving. Conversely, if the compression ratio is high the amount of memory is small but the
image quality is deteriorated. Image size setting ESB” p 53
Changing the memory card
The memory card should be removed in a power off state.
Please change the memory card when it becomes full.
.
N. Reference
We recommend using memory cards made by SanDisk
Corporation.
ww
“1.Move the triangular symbol on the memory card cover
to the side and open the memory card cover towards
Eject a fitted card you.
the tnangular symbol
CF Card Eject Button
Regarding memory cards
h 4
Installing a new memory
À В сага. но
OPush the card with the surface of the card having the
triangular symbol facing forwards.
Push the card in until the CF card eject button comes
out to the same position as the card.
I
о
=
o
c
wn
D
=
®
©
AY)
3
D
=
>
@Close memory card cover and move triangular symbol
to the side back to its original position.
[+
Se me
If the memory card is a commercial isomorphic
memory card, it can be used as is, but with some
memory cards a message [Card requires formatting]
will be displayed on the LCD monitor. When this
message is displayed, please format the memory card.
E” p.74
27
28
Handling of the Memory Card
[|
® Note that a memory card, if taken out, may be hot immediately after taking pictures.
e Never eject a memory card or turn off the power during the data storage process or
communicating with another device. It would cause damage data or the card.
® Do not bend a memory card or subject it to a strong shock; do not expose it to the water nor
leave it at a place of high temperature.
® Be sure to format, before using, an unused memory card or a card used on another camera
( ES p.74).
e Never attempt to eject a memory card while it is being formatted. If you do so, the card
would be fatally damaged.
e It is possible for data stored in the memory card to be erased under the following condi-
tions, so please take care. Please be aware that Pentax bears absolutely no responsibility for
erased data.
* Mishandling of the memory card by the user.
* Memory card located at a place susceptible to static electricity or electrical noise.
* Card not used for a long period of time.
* Card ejected or power supply disconnected while the card access lamp is blinking.
| —
Card Access Lamp | O
OD
0 a
= 0ir
® The memory card has a limited lifespan. The stored data may become corrupted if the
memory card is not used for a long period of time. Ensure that necessary data is backed up
to a personal computer etc. on a regular basis.
® Avoid using or storing in places where static electricity or electrical noise is likely to occur.
® Do not subject the card to bending, dropping or strong impacts.
® Avoid using or storing in places where there are sudden temperature variations or conden-
sation, or in direct sunlight.
Using the function buttons
Flash mode button for setting the flash mode
By using the flash mode button it is possible to take pictures with reduced red-eye phenomenon
cu when the flash is used, or to take pictures with a properly exposed background to the subject
—. when taking pictures at night.
wv
(DCheck that the battery and memory card are installed.
@Turn on the power switch and turn the mode dial to the
Getting the camera ready capture mode symbol. 2
E
(D
y 8
| (Check the display panel. 8
Set If there is nothing being displayed on the flash setting o
Changing the flash mode display area, auto (automatic flash) setting will be 2
performed, and the flash will fire as required.
Flash setting Dr ;
display area Ñ Li Li
E Dl Ya
CHOC OC
Press the flash mode button once.
The red-eye reduction symbol will be displayed on the
LCD panel.
Red-eye reduction il F
symbol § Li Lf
i
Di La
Flash mode button ——t— > C 5 С 5)
@Press flash mode button once more.
Daylight syric Mode symbol will be displayed in the
LCD panel.
o, ou
is =
Daylight sync Mode
symbol 5 Oö Waa
COC OCD
29
30
* Display panel and flash mode setting
When the flash mode button is pressed a flash setting
symbol will be displayed on the LCD panel.
The flash setting symbol and the flash conditions are as
described in the following
amas Mach mado Symbol on LCD panel
Flash mode
Automatic flash
ispl
0 No display Flash goes off as required
Red-eye reduction.
,Ç © Before the main flash goes off, a number of small flashes are
emitted, to reduce the phenomenon where peoples eyes appear
red (red-eye reduction).
Daylight-sync mode.
The flash is forced to go off even if it is bright or back light condition.
Red-eye reduction and Daylight-sync mode
The flash is forced to go off and Red-eye reduction is in effect
when the flash goes off.
Slow-shutter-speed mode.
The flash does no go off. This mode is set when taking pictures
where flash photography is prohibited or taking pictures at night.
Slow-speed-sync (Flash-on) 8 Daylight sync mode.
Set when it is desired to take properly exposed pictures of both
people and a background when taking pictures at night
Red-eye reduction. slow-speed-sync (Flash-on) and Daylight sync mode.
Red-eye reduction when flash goes oft when taking pictures with
the slow-speed sync mode.
Taking pictures using self-timer
or remote control (a remote control is optional)
The following section described the operation of the self-timer and the included wireless remote
control for when taking pictures of the whole family using a tripod etc.
ww
Getting the camera ready
JCheck that the battery and memory card are installed.
-2-Fix camera to the tripod etc.
‘3Turn on the power switch and turn the mode dial to the
capture mode symbol
Using the function buttons
Taking pictures with the (DPress the timer button once
self-timer | A self timer symbol will be displayed on the LCD panel.
rt
Ñ Lif
В N Self-Timer Symbol
‚5 Oi Ya
COC)
(2) Check the place where want to appear in the picture by
looking through the viewfinder.
Press the shutter release button halfway down to check
focus position and then press the shutter release
“Timer Button
button fully down т
The self-timer lamp will be lit for 7 seconds, then it will =
blink for 3 seconds before the shutter is released. o
— x a
A
. D
<
Self-timer lamp 21655) [| 8
соо a ©.
TS o.
O
; =
©
\. 7
Taking pictures with the (Get the remote control ready.
remote control @Press the timer button twice.
| The remote control symbol is displayed on the LCD
panel.
ai
N LIL
A (СВ —} Remote Control Symbol
2 Oi Ya
ODO
(Check the place where want to appear in the picture by
looking through the viewfinder.
@Move to the place you want to appear in the picture,
point the remote control at the camera and press the
remote controller button.
The self-timer lamp blinks for 3 seconds and the
shutter is released.
Timer Button
31
J
NL Ee
* Ensure that the camera and the remote control
transmitter are no more than 5 meters apart.
* The remote control transmitter contains a battery, and
can transmit about 30,000 times. if the battery runs out,
please contact your nearest Pentax service centre
There will be a small charge for a replacement battery.
Adjusting focus range. Macro/Infinity button
The focus range when taking pictures can be adjusting by pressing the macro/infinity button.
+ Macro (focus range: 10cm to infinity from lens front).
Set in situations such as taking pictures of flowers in
close-up or when you want to get as close as possible to
the subject. For macro shots, it is recommended to use
the LCD monitor in stead of the viewfinder.
+ Infinity (focus range: infinite distance).
Set when taking landscape views through glass or
netting, when you want to take a photo of the landscape
without focussing on the glass or netting.
N NERO OU ©
CO
Va ON ie |
HOON MOON
(A) NT o CT
1 CO
COUT OOOO]
у
УЕ
Qe
SERRE
VW
TCheck that the battery and memory card are installed.
| 2 Turn on the power switch and turn the mode dial to the
Getting the camera ready capture mode symbol.
32
Using the function buttons
Vv
(DCheck LCD panel.
| ВЕ | If there is nothing displayed on the macro/infinity
Adjusting focus range setting display area auto-focus (focus range: 50cm 10
e infinity from lens front) will be set, and focus will be
automatically adjusted.
171 | | noes
= Macrofinfinity setting
Ñ Lf Li display area
Es) Es es
Press the macro/infinity button once. |
The macros symbol (a tulip symbol) will be displayed
on the display panel, and the focus range is set to
macro (10cm to 60cm from lens front).
LI
i Li Li > Macro symbol
Di La
E D E ) C —)—— Macrofinfinity button
XI
©
=
©
—
=
0
©
o
©
a
2.
o
==
=
x
®
©
33
Press the macro/infinity button once more.
The infinity-landscape symbol (a mountain symbol) will
be displayed on the display panel, and the focus range
is fixed to infinity (infinite distance).
7 A Infinity symbol
Ñ Li
à a
L Oi Ya
CC 0
1
Ly
34
Zoom lever
for setting the focus range to the telephoto setting and the wide-angle setting
It is possible to change the focus range to the telephoto setting and the wide-angle setting with
the zoom lever. This camera has a digital zoom function, so it is also possible to expand the
magnification range of pictures to 1.2 x, 1.5 x, or 2 x when you are shooting a subject through the
LCD monitor.
v
Getting the camera ready
1 Confirm that the battery and the memory card are
installed.
‘2'Turn on the power Supply and turn the mode dial to the
capture mode symbol.
Set the focus range to the
telephoto setting or the
wide-angle setting
‘Move the zoom lever towards the telephoto setting (a
single tree). The focus range wiil be brought closer.
Ro TTT" Stotus
-2.Move the zoom lever towards the wide-angle setting
(three trees). The focus range will be taken farther
away.
Zoom lever
Telephoto setting:
brings the subject
closer
Wide-angle setting:
takes the subject
farther away
Using the function buttons
Telephoto with the digital (Press the display button to display the LCD monitor.
Zoom |
SN Reference |
The digital zoom function can not be used unless
shooting by displaying the subject on the LCD monitor.
It is impossible to confirm the magnification rate using
the viewfinder.
Move the zoom lever towards the telephoto setting to
set the highest magnification rate. |
One Shot® Overlay Status
Release your finger from the zoom lever once, and
move the zoom lever towards the telephoto setting
again. The digital zoom function will be on and the
digital zoom symbol will be displayed on the LCD
monitor.
I
o
=
—
©
—
Dm
A
©
to
o
o
a
©.
o
—
©
La
®
©
35
digital zoom symbol
“Qne Shots" Overlay ma ES
‘4:If.the zoom lever is moved towards the telephoto
setting, the magnification range can be changed to 1.2
x, 1.5 x, or 2 x. If the zoom lever is moved towards the
wide-angle setting, the magnification rate can be set
lower.
Ore Shot Overlgy
1.2 x
VERY TJ Overiay
1.5x
One SAT MP Overigy
2х
5'To return to the normal zoom range. move the zoom
lever towards the wide-angle setting when the magnifi-
cation rate is 1.2 x.
o
N Reference
Even when the digital zoom function is on, the digital
function can be canceled by the following operations.
* Turning off the power supply.
* Pressing the menu button.
* Turning off the LCD monitor.
* Turning the mode dial.
Using the function buttons
Using the diopter to adjust viewfinder visibility.
It is possible to adjust the viewfinder visibility so that different people can see through the
viewfinder.
I MLook through the viewfinder.
Adjusting the viewfinder @Rotate the diopter adjustment dial on the left side of the
vi sibility | viewfinder to a position at which the frame lines in the
| viewfinder can be seem most clearly.
diopter adjustment dial
и
o
=
—
O
—
jah]
X
(D
o
Q
O
CL
o.
o
—
=
(D
D
37
Setting Video Output Format
Select a video output format NTSC or PAL.
A
‘1Turn on the power switch of the camera, rotate the
| mode dial , and line up the presentation mode symbol
Put info with the black line.
Presentation Mode 2 If the menu button is pressed, the [Play Settings] menu
will be displayed.
A
If the down arrow on the four-way controller is pressed
twice while [Slideshow] is displayed in highlighted text.
Select a video [Video] wiil be displayed in highlighted text.
output format 2 Press the left soft key to select the soft menu [Edit]
'3-Press the left and right arrows on the four-way control-
ler to select NTSC or PAL.
4 Press the right soft key to select the soft menu [Exit].
38
Summary of Step-up Operation .….…..…..…...….……erircesiasenseneentencenennere csv
Using Various Functions
About The Various Capture Methods o.com ene
Setting File Settings... ET
Setting Exposure, White Balance And ISO Speed er
Stamping Date & Time And Text On A PÍCtUre ..............eennn ee
Changing The Settings Of Functions Of The Camera ..............—.—..ee
Application For Review Mode Function
Playing Pictures One By O Dona
Continuous Play With Automatic Switching er A ее
Arranging Picture With Review Mode
Basic Operation For Review MOE... e
Deleting Picture Taken .…………..…...….……iercerenennen Te
Categorizing Pictures ..................ee e
Searching Taken Pictures .......... EE
Printing Or Other Processes Using Other Devices
Printing The Pictures You Have Taken conn errr
Viewing And Processing The Pictures You Have Taken On A PC ................—.
Transmitting/Receiving Pictures To/From Other Cameras Having
Digita INSANEA «ove TH
Running A Script... einen
39
adh aod og ow
ЗОЖ бобов от 8 8 #4 1% E LF
summary of Step-up Operation
Step-up operation mainly describes a setting menu displayed by pressing the
menus button.
Basic Operation of the Setting Menu
Description will now be given of displaying the setting menu and how to set the various func-
tions.
Display setting menu
screen
—=—
PES
7 >
X "
"
o
-1:-Confirm that batteries and memory card are
installed.
'21Turn on power supply
will be displayed.
presentation mode, and review mode.
-4:Press the Menu button
Four-way Controiler
LCD monitor
Capture Mode ©
Menu button
3-Turn the mode dial to select mode whose menu
The setting menu is different for capture mode,
The menu for each mode is displayed on the LCD
monitor.
Presentation Mode =) Review Mode ©
|2 Display setting items
Menu Item
Setting Item
Soft Menu
controller to select menu items.
e.g. Review mode menu items
'1:Press the left and right arrows on the four-way
4 PO # €: $ @ + =
eABEIOCRECQCCCCOOSEPOONCENQNOAQENÍANN ICAC
En
м
OPress up and down arrows on four-way controller
to select setting items. |
(Select soft menu [Edit] by pressing left soft key.
Setting content for the setting item will be dis-
played. |
e.g. When setting item [File] is selected
KJ setting of respective (DSelect setting content.
items
- Aleft pointing triangle 4 and When the setting content is
> are shown to the left and displayed on the screen, the
right of the setting content, and cursor is moved to the different
the setting content is displayed setting content items by
by pressing the left and right pressing the up and down
arrows on the four-way arrows on the four-way
controller. controller.
Alf the right soft key is pressed to select [Exit], the
selected content is set.
* Depending on the setting content, some items are
set by simply choosing [Select].
* When a soft menu [Default] is displayed on the
setting screen, pressing the left soft key enables the
settings to be reset to the factory setting after
settings have been changed.
Alf the menu button is pressed, the set content is
validated. and the respective function is returned
to.
o CoPreceordcacecucoacaccocoOCATOCACACANACABOCRNACOÍ
50000000090050000000050002090020009000°
00,000000800000022500006805%
41
Menu items displayed for each function
+ Capture Mode
[Capture Settings] menu
(File; settng … … … File Type (JPEGTIFF) Quat ty Leve ‘JPEG aly), reso Lt or erg
ES p52
relacse] seung Interval ard number of images tor trrelanse stooting EE” p 48
[Exposure] setting .. exposure “o des. grated mode (Landscape Program Fortra
Program, Action Program e:c y ESE” pas
(EV Comcersa:cr” set exposure in sieps 9 +0 5 EYES pag
[WF 2 Balance] Setting white Da.arce for aiferen: lyr sources. [АЙ р 57
[Focus]. . . . Setto Auto Focus er Mar »a' Focus when *acussina. EA” c 58
[AE Metering) . . Setting the meter 1G Tetnad tor when dzerrin cg бхосб re
lef p60
[ISO Speeg] . Setting ISO speed tc AL's SO 150 cr ISOP200. EA” 7 6°
[Dae & Time] © Set wherer or net о subenmpose a date á tre stamp on à p-cture
and if 55 se” the type of Stame placement backgrouro color etc
E pe?
[Text]... Set whether or ns: tc SJPErTOCse ext 0” a picture and if sc se’ the
leters placement backgroL a color err [AE ged
[Logo] .. .. Setwheter or rot ‘о SLDerimpase storea Tage cata 07 a Dic re as
a logo file arc * sc set :he o acement [sF 668
However. there is na logo “ e stored in tre Memory cardironudez
[Display] .... . Sel brightness of ‘te LCD man-ar dispiay tre for nstant review for
display7g a p.cture Mrediate y a'ter it vas bee” taken sueter o
ot o display a picture 97 :he _CC mentor a” the tmeofarnga
pclure. anda: Te “or unirg of a power supply И there is no
operator Es” p 79
[Sound] . .. .. Settne volume of recorded sonas and start-up and srutter re ease
Juitas sounds of the camera (systsr stunrds) atc whether or not to
use the system sounds [& o 72
[Format Card]... Th:s wr: de.ete every! ng nie memory card. ESE” p 74
IPC Zarnect Mace” . Set whether :c use a USB Disk Dr ve cr a Digıta Device when
connectng the camera ic a persoral computer ES D.125
Date & Tme] . … Set current cate & tre EP D 74
{mage Courter] Set whether *+e numper о be a“ixed to ar. image s"ou a start from
“17 or continue ar from a cumuatve NUMDEr wher an empty
memory card :s .sed ESF” p.76
Language] . . .. Setthe anguage in wh:ch menus and Messages are displayed
(Eng.ishFrencn: ttalian ‚Spanish German Japanese) I” p.79
[Reset Sett.ngs] . Returr the vario.s settings (except for [Language], Date & Time
settings] & [video output system) :0 the factory se:tings. Esk” p 80
NODO 2 FAO PO LO TARO CUT EMO PERO E RO TIO 27 Te = pry NO Ma € ms a PE AE EM NO ETA и
dd ELO ES E бло со ко сё E A ESO CO ei E E E a 3 ss a 8 5 UF eb Ye EE ESO AO AL E ES
+ Presentation Mode ©
[Play Settings] menu 3
[Slideshow] .......... Set the content, display interval, whether or not to use sound, and <
whether or not to repeat when displaying captured pictures as a
slideshow on the LCD monitor of the camera or on a television.
E p.85
[Playback Rate] ... Set the display interval when displaying photographs taken using
timelapse shooting or continuous shooting. ri p.88
[Video] ............. Set video out (NTSC/PAL) when connecting to a television. a
+ Review Mode & | ©
[Edit] menu | ;
[Delete] ...............- Delete the photograph selected on the edit screen. ES” p.96 -
[Group] ................ Attach a name lo à photograph selected on the edit screen to make
a new group, or add to an already existing group. re р.103 N
[Protect] ............... Protect the picture selected on the edit screen so that it can not be -
deleted or remove protection. TE” p.98 =
[Categorize] ........ Sort the picture selected on the edit screen into a separate category. 2
E p.102 2
[Add Images] ...... When printing only photographs selected on the edit screen, set
whether you want an index print or standard prints, and set the
number of copies. KB” p.116
[View Order] ........ Display your print order form. LS" p.1i9
[Erase Order] ...... Delete all print order forms. TE” p.120
[Camera - Camera) ... Transmit or receive pictures from another Pentax El-200 camera, or
“another digital camera that has Digita operating system. E p.127
[Camera - Printer] ... Transmit pictures in this camera to a Hewlett Packard Printer for И
printing. RÉ p.121 И
[By date] .............. Detect and display pictures in the designated date range on the edit
screen. EE” p.110 ;
[By category] ....... Detect and display pictures categorized on the edit screen. .
ES p.112
sOROSEadeNCCONHATECANPCACSOCACSADOCONSTAMESONOCES
44
Using Various Functions
| Page
About The Various Capture Methods .................—.eeee=e0600e00menee EEE 46
Taking pictures in continuous shooting MOdE …......….......rrrercrrenera sance nee sssrrne 47
Taking designated number of pictures at regular interval
-Timelapse shooting mMOde- .....................emeeeene ene cer s ere 48
Sound recording for a captured picture- Sound Recording ..................eme.— 50
Setting File Settings ………....…-.mimseseeneeeeneene enesne neeencee eee eee 52
Setting save format and size of image -File Setting .............:.....—...—————=———— 52
Setting Exposure, White Balance And ISO Speed ...….......….….…..….…r-cecriierennees 54
Setting exposure mode according to subject -EXposure ....................emeeeenes 54
Exposure adjustment for whole photo-EV Compensation ...................—....— 56
Adjusting color balance according to lighting - White Balance ..................——.- 57
Manual focus - AF/MF Focus Mode .................—.—.————. einen nenes 58
AE Metering range setting for determining exposure - AE Metering ................. 60
ISO speed setting - 1ISO Speed ............... eee aero sarees 61
Stamping Date & Time And Text On A Picture .............—...—.——.=.——>—>—r=eene 62
How to set the date and time of shooting to be stamped on a picture
- Date and Time ……..….…..….……cecrrressanaeneFrnenna TT NEUE KKUUHTTEG 62
How to set your favorite phrase to be stamped on a picture - Text... 64
How to set a logo to be stamped on a picture - Logo ooo, 68
Changing The Settings Of Functions Of The Camerad.................—-.—.——===.... 70
Changing the display state of the LCD monitor - Display ................. eee! 70
Changing the playback volume and function sound - Sound ............. eee. 72
Erasing all the data in the memory card - Formatting the card .................. 74
Setting the display mode of the date - Set date and time STOUR 74
Setting the method for numbering pictures - Image numbering method .......... 76
Naming the camera - Camera name .................—-m+++ieedicerereeeren e 77
Specifying the language displayed - Language overcomes cer 79
Resetting the setting of the camera to the initial state - All reset ..............——.—...... 80
46
About The Various Capture Methods
As well as the operation of taking pictures one frame at a time (single frame shooting) by pressing the
shutter release button, this camera also has the following capture methods. It is also possible to
record sound with a captured picture.
* Continuous shooting
Pictures will be taken continuously while the shutter release button is held down.
When taking pictures with movement, such as at a sports day or the like, pictures can be taken
continuously, enabling pictures like the shifting of motion picture frames.
ВВ В ай
о
+ Timelapse Shooting.
When the shutter release button has been pressed, pictures will be taken the designated number of
times and at the designated interval.
In fixed point observation etc., the camera is placed on a tripod and it is possible to take a landscape
picture of a specified place at fixed intervals.
D
' в j X . и
Y Li PE | = Г
| — = 7 я ’ —
+ Sound Recording
It is possible to record sound with a captured picture.
It is possible to record speech in a large hall or directed towards a microphone, such as when
everyone shouts “Happy Birthday!” or “Congratulations!” at a birthday party, with a picture.
About The Various Capture Methods
Taking pictures in continuous shooting mode
Pictures will be continuously taken as long as the shutter release button is held down.
N. Reference |
e With continuous shooting, pictures will be continuously taken while the shutter release button is
held down (until the memory card is filled up).
e With continuous shooting, pictures will be taken in succession as fast as possible, but there will
be variation in the interval due to throughput of the camera and charging of the flash.
1 Display of the live view screen
Turn on power supply and turn the mode dial to
capture mode (camera symbol).
Press the display button and the live view screen will
be displayed.
2 Switching to continuous shooting
Press left soft key to cause the soft menu [Continuous]
to be displayed.
ESTELLA TT
{ontinuous®. Overlay Status
Soft menu [Continuous]
Left soft key Right soft key
Middie soft key
Cc
©.
3
@
<
v
=
E
о
T
с
3
3.
=
3
O
47
3 Continuous capture
‘J‘Ensure subject to be taken is inside the AF frame in the
viewfinder. then press the shutter release button
halfway down.
-2:Confirm the green lamp lights up, and keep pressing
the shutter release button. When finishing continuous
capture, take away your finger off the shutter release
button.
o
MU: Te
Captured pictures will be shown on the instant review
screen.
* To delete pictures shown on the instant review screen,
press the middle soft key and choose the soft menu
[Delete]. It is possible to take pictures continually while
[Ready] is displayed on the LCD monitor. If the instant
review screen disappears or the soft menu [Exit] is
selected by pressing the right soft key, the pictures
displayed will be saved in the memory card.
All captured pictures will be saved in the memory card
as a single group.
Instant Review screen
Taking designated number of pictures at regular interval -Timelapse shooting mode-
Pictures will be taken the designated number of times and at the fixed interval.
=> a 1 Display [Timelapse] setting screen
HE 2
DEI”,
1. Turn on the power supply and turn the mode dial to
select Capture Mode (camera symbol) .
‘2'Press the menu button to display the [Capture Settings]
menu.
'3-Press the bottom arrow on the four-way controller to
display [Timelapse] in highlighted text.
.4:Press the left key to select the soft menu [Edit].
[Timelapse Settings] screen will be displayed.
2 Setting number of images and interval
1 While displaying [# images] in highlighted text, press
the left and right arrows on the four-way controller to
display the total number of pictures to be taken in
timelapse shooting mode.
[Timelapse Settings] screen
About The Various Capture Methods
7 ,
NS, Reference
The number of pictures can be set from 2 to 1000.
However, a message [Not Enough Memory] will be
displayed if there is not enough room in the memory
card for the designated number of images when
starting the exposure. Please set a number within the
number of images possible displayed on the LCD
panel.
@ Press the down arrow on the four-way controller to |
display [Interval] in highlighted text.
(3 Press the left and right arrows on the four-way control-
“ler to display interval to be set.
@ After setting, press the right soft key to select the soft
menu [Exit].
[Capture Settings] menu will return on the screen.
® Select the soft menu [Exit] by pressing the right soft
key to return to a capturing state from menu screen.
SUONOUN4 SROLUEA Buisn
3 Switching to timelapse shooting mode
Press the display button to display the live view screen.
Press the left soft key to display the soft menu
[Timelapse].
@To save battery power, press the display button so as
not to display the LCD monitor.
E
Ti I pr Overlay Status
Soft menu [Timelapse]
Timer display Number of images
4 Start timelapse shooting
@Show a photo to be taken in the AF frame [+] and
press the shutter release button halfway down.
@ Confirm that the green lamp lights up and press the
shutter release button.
The first photo will be taken. The first picture is taken,
and a Timer Display which counts down from the
designated time at the fixed interval, and the number of
pictures taken so far will be shown on the LCD monitor.
The screen while taking photos я —
N. Reference |
Press the right soft key to select [Stop] to cancel
shooting at any time during shooting.
@The first captured picture will be displayed on Instant
Review screen when Timelapse shooting is finished.
49
fe)
\ Reference
* All of the pictures captured in Timelapse Shooting
mode will be saved in the memory card as in a group.
* Select the soft menu [Delete] by pressing the middle
soft key to delete photos taken in Timelapse Shooting
mode.
Sound
recording for a captured picture - Sound Recording
It is possible to record sound just after taking photos (while the Instant Review screen is displayed) .
NN Reference
* It is possible to record sound in Presentation Mode (té p.94) or Review Mode after taking photos.
It is possible to re-record sound in Presentation Mode or Review Mode (EE p.83).
“sus 1 Recording sound just after taking photos
1 Turn on the power supply and turn the mode dial to
select Capture Mode (camera symbol).
2‘Show a subject in the AF frame [7] of the viewfinder
and press the shutter release button halfway down.
3 Confirm that the green lamp lights up and press the
shutter release button completely down.
Sound Recording screen Captured photos will be displayed on the Instant
Review screen.
-4:Press Sound Record button to display the view for
which sound is recording.
Surrounding sounas or a voice directed toward the
camera will be recorded.
PENTAX (TT
Sound recora button
50
About The Various Capture Methods
Press Sound Record button to finish recording.
Instant Review screen will be displayed.
(e)
SS Reference
e To play recorded sound, select the soft menu [Play] by
pressing the left soft key. |
To delete the photo displayed on the Instant Review
screen, select the soft menu [delete] by pressing the
middle soft key. Both picture and sound, or only
Instant Review screen after recording sound, can be deleted.
e if the Instant Review screen goes off or the soft menu
[Exit] is selected by pressing the right soft key,
displayed photos will be saved in the Memory Card.
e The maximum recording time is 45 seconds.
suonound snolep buisn /
51
Setting File Settings
Setting File Settings for pictures in One Shot Shooting, Continuous Shooting and Timelapse Shooting.
(A
N Reference
Regarding setting Timelapse shooting ga p.48
* Save format of picture
JPEG (Compression format), TIFF (non-compression format)
* Quality level (compression rate) of photo when saving in JPEG format
Good, Better, Best
* Image resolution
Full (1600x1200 pixels), 1/4 (800x600 pixels)
* Color
Full, B & W, Sepia
Setting save format and size of image - File Setting
Set file setting of photos for One Shot Shooting, Continuous Shooting and Timelapse Shooting
The set file setting is saved in the Camera. so it is effective even when the power supply turned
off. Select [Default] on the File Settings screen to return to initial setting.
1 Displaying [File Settings] screen
"1. Turn on the power supply and turn the mode dial to
Capture mode.
2.1f the menu button is pressed, the Capture Setting
screen will be displayed.
3 Press the left soft key to select [Edit] while displaying
[File Settings] in highlighted text.
[File Settings] screen will be displayed.
2 Setting [File Settings]
1 Press the up and down arrows on the four-way
controller to display setting items in highlighted text.
2 Press the left and right arrows on the four-way control-
ler to display setting content,
[File Settings] screer
52
Setting File Settings
(After setting necessary items, press the right soft key to
select the soft menu [Exit]. |
The [Capture Settings] screen will be displayed.
a
Reference
If [Default] is selected by pressing the left soft key, the 5.
initial settings will be restored. =
Dit the soft menu [Exit] Is selected by pressing the right =.
soft key, the menu will return to capturing status. 2
You are now ready to take photos in the set file setting. I
3
- O
+ File Type D
Set a file type for pictures. Set [JPEG] or [TIFF] by pressing the left and right arrows on the four-
way controller. ;
[JPEG]: Saving by compressing files.
[TIFF]: Saving without compressing files.
+ Quality Level
Set Quality Level of compressing when File Type [JPEG] is set.
Set [Good], [Better], or [Best] by pressing the left and right arrows on the four-way controller.
а |
N Reference
When saving in File Type [JPEGI, compression rate determines the Quality Level. The higher
the compression rate is, the smaller the capacity required for storage becomes, but Quality
Level will deteriorate. .
Compression Rate: (higher) Good>Better>Best(lower)
Quality Level: (rougher) Good>Better>Best(clearer)
+ Resolution
Set image resolution when taking photos. Set [Full Size] or [1/4 Size] by pressing the left and right
arrows on the four-way controller.
“ [Full Size]: Taking photos at 1600x1200 Pixels
(1/4 Size]: Taking photos at 800x600 Pixels
+ Color
Set Color when taking photos. Select [Full], [B&W] or [Sepia] by pressing the left and right arrows
on the four-way controller. ; |
Setting File Settings and the number of photos that can be taken
If File Settings is set, the displayed number of photos can be taken will be changed.
If File Type [TIFF] (non-compression) and Resolution [Full Size] are set, it is possible to
take photos at the best Quality level, but the number of picture that can be saved in the
Memory Card is lower.
Also, if File Type [JPEG], Quality Level [Good] and Resolution [1/4 Size] are set, the
number of photos can be saved in the memory card increases to the maximum, but
Quality Level is worst. [&” p.25
53
54
Setting Exposure, White Balance And ISO Speed
On the [Photo Assist] menu, it is possible to set Exposure, White Balance or ISO speed or to switch
between Auto Focus and Manual Focus.
* Save Exposure La” p.54
Auto, Landscape Program, Portrait Program, Action Program, Aperture Priority, Shutter Priority
* EV Compensation ras” p.56
Compensating exposure from —2.0EV to +2.0EV in 0.5 EV steps.
* White Balance rg p.57
Auto, Daylight, Tungsten, Fluorescent
* Focus gg р.58
Auto focus, Manual focus
* АЕ Metering gz p.60
Average (whole screen), Center-weighted (the main center area of the screen), Spot (only the
center of the screen)
* ISO Speed gg p.61
Auto, 1SO100, ISO 200
Setting exposure mode according to subject - Exposure
It is possible to take photos at a proper exposure by selecting Exposure mode according to subjects. It
is also possible to take photos using Aperture Priority Exposure Mode or Shutter Priority Exposure
Mode as a method for determining exposure.
2
SN: Reference
Exposure mode setting is effective until the power supply is turned off. Once the power supply
is turned off, exposure will be set to Auto.
+ Auto
Auto is the most commonly used exposure mode and it is recommended that you use this normally.
Exposure will be automatically set for subjects to be photographed when the shutter release button
is pressed in halfway.
* Landscape Program
It is possible to take photos of an entire landscape on the screen much more clearly by setting the
ISO speed lower and making the aperture opening smaller.
* Portrait Program
By opening the aperture larger, it is possible to take photos of a person in the center much more
clearly,
* Action Program
By setting the shutter speed faster and the ISO speed higher, it is possible to take photos contain-
ing fast action.
Setting Exposure, White Balance And ISO Speed
+ Aperture Priority
By setting the aperture opening with the up and down arrows on the four-way controller, it is
possible to take photos with the shutter speed adjusted to the fixed aperture.
+ Shutter Priority
By setting the shutter speed with the up and down arrows on the four-way controller, it is possible
to take photos with the aperture changed according to the fixed shutter speed.
1 Displaying [Exposure Mode] screen
MTurn on the power supply and turn the mode dial to the
Capture Mode symbol.
Alf the menu button is pressed, the [Capture Settings]
menu will be displayed.
@llf the right arrow on the four-way controller is pressed,
the [Photo Assist] menu will be displayed.
[Photo Assist] screen . @pPress the left soft key to select the soft menu [Edit]
when [Exposure] is displayed in highlighted text.
[Exposure Mode] screen will be displayed.
С
©.
3
<
<
D
=.
o
E
о
T
<
3
o
=
>
©
55
Check mark The Exposure currently set
2 Selecting [Exposure Mode]
(DPress the up and down arrows on the four-way
Exposure Mode controller to display [Exposure Mode] for subjects in
a | Mo—————— | highlighted text.
e a dscap de OPress the left soft key to select the soft menu [Select].
The selected exposure will be set and the [Photo
Assist] menu will be displayed.
Select Exit Ш GIfthe soft menu [Exit] is selected by pressing the right
soft key, capturing status will be restored.
It is possible to take photos with the set exposure
mode. |
ME
If Aperture Priority or Shutter Priority is set, it is possible
to take photos by setting the aperture number and the
shutter speed which are displayed on the LCD monitor.
[Exposure Mode] screen
56
Regarding setting exposure mode
+ Regarding setting exposure mode and ISO speed
If the exposure mode is set to Landscape Program, Portrait Program. Action Program. or
Shutter Priority ISO Speed an the [Exposure Mode] menu will be set automatically, and
can not be set manually
* How to take photos in Aperture Priority AE
Mode
Set Exposure Mode to [Aperture Priority].
The aperture number and the shutter speed will
be displayed on the LCD monitor when the
shutter release button is pressed halfway.
Fa
If the up and down arrows on the tour-way
controller are pressed. the aperture number will
be changed.
The shutter speed will be set automatically Aperture display: displayed at AvF2.7
according to the set aperture.
* How to take photos using the Shutter
Priority AE Mode
1 Set Exposure Mode to [Shutter Priority]. Press
the shutter release button halfway.
The LCD monitor will be displayed.
2. 1t the up and down arrows are pressed. the
shutter speed will be changed.
The aperture will be set automatically according
to the set shutter speed.
Shutter speed display: 1/2 position
Exposure adjustment for whole photo - EV Compensation
It is possible to make the whole photo overexposure or underexposure (by at most 2.0 EV).
ful
N
* The set EV Compensation will be saved in the camera, so it is effective even when the power
supply turned off. Select [Default] on the EV Compensation screen to restore the initial settings.
* If the camera is turned off. [Default] = 0 will be restored.
1 Display [EV Compensation] screen
-1'Turn on the power supply and turn the mode dial to the
Capture Mode symbol.
"2:1f the menu button is pressed, the [Capture Settings]
menu wilt be displayed.
-3:1f the right arrow on the four-way controller is pressed,
the [Photo Assist] menu will be displayed.
Photo Assist] menu
Setting Exposure, White Balance And ISO Speed
Dit the down arrow on the four-way controller is pressed,
the [EV Compensation] screen will be displayed in
highlighted text.
OJPress the left soft key to select the soft menu [Edit].
The [EV Compensation] screen will be displayed.
2 [EV Compensation] setting
(DAdjust exposure by pressing the left and right arrows
on the four-way controller.
The setting value for exposure will be displayed by
pressing the left arrow for the minus direction (darker),
and the right arrow for the plus direction (brighter).
Press the right soft key to select the soft menu [Exit].
[EV Compensation] screen The selected exposure will be set, and the [Photo
Assist] menu will be displayed.
; |
SN Reference |
To restore to the initial settings from those just set,
press the left soft key to select the soft menu [Default]. -
(3)Select the soft menu [Exit] by pressing the right soft
key and capturing status screen will restored.
It is possible to take photos with the set exposure.
©
©,
3
ce
<
sv
=
©
©
©
n
=
=
o
=,
o
3
о
Adjusting color balance according to lighting - White Balance
Adjust the color of photos according to lighting when taking pictures. ;
The whole picture can take on a green or red hue when taking photos under fluorescent light or
normal electric light bulbs. White balance adjusts the colour of pictures according to the lighting
when taking pictures.
o
S Reference
The setting of White Balance will be effective until the power supply is turned off. Once after the
power supply is turned off, white balance adjustment will be set to Auto.
+ Auto
Automatically adjust white balance.
+ Daylight
Set to Daylight when taking photos under natural sunlight
+ Tungsten _
Set to Tungsten when taking photos of subjects lit up with normal or tungsten light bulbs or.
# Fluorescent |
Set to Fluorescent when taking photos of subjects lit up with florescent light.
57
58
1 Displaying [White Balance] screen
Turn on the power supply and turn the mode dial to
Capture Mode symbol.
-2:1f the menu button is pressed, [Capture Settings] menu
will be displayed.
'3:1f the right arrow of the four-way controller is pressed,
the [Photo Assist] menu will be displayed.
[Photo Assis"? menu 4.1f the down arrow of the four-way controller is pressed
twice, [White Balance] will be displayed in highlighted
text.
5 Press the left soft key to select [Edit].
The [White Balance] screen will be displayed.
Check Mark White Balance currently set
2 Selecting light condition
“Press the up and down arrows on the four-way
controller to display light conditions in highlighted text.
2:Press the left soft key to select the soft menu [Select].
The selected white balance will be set and the Photo
Assist menu will be displayed.
3:If the right soft key is pressed to select the soft menu
[Exit], capture status will be restored.
You are now ready to take photos with the set white
balance. |
Manual focus - AF/MF Focus Mode
It is possible to focus manually.
o
N. Reference
If the camera is turned off, AF (Auto Focus) will be restored.
[White Balance] screen
= =P Los 7 1 Displaying [Focus Mode] screen
Turn the power supply on and turn the mode dial to the
Capture Mode symbol.
'2:If the menu button is pressed, the [Capture Settings]
menu will be displayed.
3ilf the right arrow on the four-way controller is pressed,
the [Photo Assist] screen will be displayed.
[Photo Assist] menu 4:1f the down arrow on four-way controller is pressed
three times, [Focus] will be displayed in highlighted
text.
Setting Exposure, White Balance And ISO Speed
(Press the left key to select soft menu [Edit].
[Focus Mode] screen will be displayed.
Check mark The Focus Mode currently set
2 [Focus Mode] setting
#
(DPress the up and down arrows on four-way controller to
display Auto Focus or Manual Focus in highlighted text.
Press the left soft key to select soft menu [Select].
The selected focus mode is set and the [Photo Assist]
screen will be displayed.
Press the right soft key to select soft menu [Exit] and
capture status will restored.
You are now ready to take photos with the set focus
mode.
suonoung snoliep Bus ,
How to take photos with Manual Focus Mode
(D Set focus mode to Manual Focus. Shooting Distance
O) Press the menu button to display the LCD
monitor.
(3) Press the left and right arrows on the four-way
controller to set the shooting distance
according to the subject. |
It is possible to take photos at the set shooting
distance.
7 -
SN Reference
With the Manual Focus setting, even when pressing the Macrofinfinity button, the
Macro/infinity setting symbol will not be displayed and it will not be effective.
59
AE Metering range setting for determining exposure - AE Metering
Set AE Metering range of exposure on the screen when setting exposure.
¢ Average metering
Set exposure based on the whole screen.
+ Center-weighted metering
Set exposure based on the main center area on the screen.
+ Spot metering
Set exposure based only on the center of the screen.
1 Displaying [AE Metering] screen
(1: Turn the power supply on and turn the mode dial to the
Capture Mode symbol.
2:1f the menu button is pressed. the [Capture Settings]
menu will be displayed.
13:1f the right arrow on the four-way controlier is pressed,
the [Photo Assist] menu will be displayed.
[Photo Assist ] menu 4 If the down arrow on the four-way controller is pressed
four times, [AE Metering] will be displayed in high-
lighted text.
5'Press the left key to select the soft menu [Edit].
The [AE Metering] screen will be displayed.
The set AE Melering at present
Check mark 2 [AE Metering] Setting
"1:Press the up and down arrows on the four-way
controller to display AE Metering range to be set,
2 Press the left soft key to select [Select].
The selected AE Metering range is set and the [Photo
Assist] screen will be displayed.
3 Press the right soft key to select the soft menu [Exit]
and capture status will be restored.
You are now ready to take photos with the set focus
[AE Metering) screen mode.
60
Setting Exposure, White Balance And ISO Speed
ISO speed setting - ISO Speed
It is possible to set ISO speed just like ISO speed for films.
и
Reference
e
Itis possible to take photos with high quality, but the exposure time is increased.
It is suitable for taking pictures of landscapes.
ISO speed can be set only when [Aperture Priority} or [Shutter Priority] has been set from the e
[Exposure] menu. | o
©
+ Auto | <
Set ISO speed automatically according to conditions of taking photos. o
+ ISO 100 Ma
<=
=
2
=
=
cn
+ 150 200
Exposure time is short, but the quality of the photos is deteriorated.
It is suitable for taking sports pictures with movement, as well as night view pictures.
1 Displaying [ISO Speed] screen
MTurn the power supply and turn the mode dial to the
Capture Mode symbol.
(IF the menu button is pressed, the [Capture Settings)
menu will be displayed. |
QIf the right arrow on the four-way controller is pressed,
the [Photo Assist] menu will be displayed.
[Photo Assist] menu @ If the down arrow on the four-way controller is pressed
five times, [ISO Speed] will be displayed in highlighted
text. |
Press the left soft key to select [Edit].
[ISO Speed] will be displayed.
Check mark ISO speed set at present
2 [ISO Speed] setting
(DPress the up and down arrows on the four-way |
controller to display 1SO Speed to be set in highlighted
text.
Press the left soft key to select the soft menu [Select].
The selected ISO speed is set and the [Photo Assist]
menu will be displayed.
Press the right soft key to select the soft menu [Exit]
and capture status will be restored. |
(ISO Speed] screen
61
62
Stamping Date & Time And Text On A Picture
Using the [Image Stamp] menu, you can stamp a date, letters, and a logo (a logo file is saved in the
memory card) on a picture that has been taken.
N. Reference
Once the date and time or texts are stamped on a picture, you cannot delete just them,
because they have been Captured together with images.
* Stamping date and time ra p.62
Set a type, position, background of letters, color of letters, and background color of the date and
time.
* Stamping text [5 p.64
Set input style, position, background for letters, color of letters, and background color for text.
* Stamping a logo [5° p.68
Retrieve a logo file saved in a memory card and set the position to be stamped. But, this function
can not be used at present.
How to set the date and time of
shooting to be stamped on a picture - Date and Time
You can stamp the date and time of shooting on a picture.
* Format of date to be stamped [Type]
month/day/year,
i [Date] month/day/year | [Time] hours:minutes | [None]
hours:minutes
No stamp
* Stamping position [ Placement]
Upper right Center Lower left Lower right Upper left
* Type of background for the date and time [Transparency]
[Opaque] Background is [Semi] A semi clear [Clear] No background
provided for the date and time background is provided | of date and time
* Color of the date and time to be stamped
| Red | Сгееп | Blue | Cyan | Magenta | Yellow | Black | White |
* Color of the background, if the background is provided
[Red | Green | Blue | Cyan | Magenta | Yellow | Black | White |
Stamping Date & Time And Text On A Picture
1 Show [Date/Time Stamp] screen
(Turn on the power supply and set the mode dial to the
shooting mode mark.
@pPress the menu button, and the [Capture Settings]
menu appears.
@pPress the right arrow of the four-way controller twice,
and the [Image Stamp] menu appears.
@While [Date & Time] is displayed in highlighted text,
press the left soft key to select [Edit] an the soft menu.
[Date/Time Stamp] screen is then displayed.
suonoun4 snolleA buis 5
2 Setting the stamping format of date and time
@While [None] is displayed in highlighted text, press the
right and left arrows of the four-way controller to
indicate the type of date and time to be stamped.
@ Press the lower arrow of the four-way controller, and
[Placement] is then displayed in highlighted text.
®)Press the right and left arrows of the four-way controller
[Date/Time Stamp] screen before set-up to select a stamping position.
@ Repeat the same procedure until the background of
letters, the color of letters and the background color
are selected. |
| Date/ Time Stamp After setting up the necessary items, press the right
Type {_kih _p soft key to select [Exit] on the soft menu, and the
80/4/18 18:50 [Image Stamp] menu appears.
S Reference
If you want to resume the initial state, press the left soft
key to select [Default] on the soft menu.
Press the right soft key to select [Exit] on the soft menu.
Now you can stamp the date and time on a picture
according to the settings.
[Date/Time Stamp] screen after set-up
+ Type
You can set the type of the date and time to be stamped. Use the right and left arrows of the four-
way controller for selection. |
[Date & Time] ... Both [date] (month/day/year) and [time] (hours: minutes) are stamped.
[Date] .............. Only [date] (month/day/year) is stamped.
[Time] Only [time] (hours : minutes) is stamped.
[None] ................ Neither [date] nor [time] is stamped.
Changing the display format of Z(áDe] or [Time]
If you want to change the order of year, month, and day of the date (i.e., month/day/year, year/
month/day, etc.) to be stamped, or the indication of time (i.e., 12-hour or 24-hour indication), go
to the [Set Up Date and Time] screen. rg= p.74
63
64
+ Placement
You can set the position of the date to be stamped. Use the right and left arrows of the four-way
controller for selection. Each time you press the right arrow, the following stamping position
options will be displayed in this order:
[Upper Right] — [Center] -> [Lower Left] — [Lower Right] » [Upper Left]
* Background of Letters
When stamping the date and time on a picture, you can decide how the image corresponding to
the date and time to be stamped is handled. Use the right and left arrows of the four-way controller
for selection.
[Opaque] .. Background (or background color) is provided for the date to be stamped on a picture.
[Semi ] ..... A semi clear background (or background color) is provided for the date to be stamped
on a picture.
[Clear] ...... No background (or background color) is provided for the date to be stamped on a picture.
€ Color of Letters
You can set the color of the date to be stamped. Use the right and left arrows of the four-way
controller for selection. Each time you press the right arrow, the following choice of colors to be
set will be displayed in this order:
[Red] » [Green] » [Blue] » [Cyan] > [Magenta] -+ [Yellow] -> [Black] -» [White]
+ Background color
When you select [Background] for the background of letters, vou can set the background color of
the date. Use the right and left arrows of the four-way controller for selection. Each time you press
the right arrow, the following choice of colors to be set will be displayed in this order:
[Red] - [Green] > [Blue] > [Cyan] + [Magenta] -> [Yellow] - + [Black] —» [White]
How to set your favorite phrase to be stamped on a picture - Text
You can stamp your favorite phrase, such as names of a person or a place, on a picture.
¢ Enter letters to be stamped - text stamp
| [A]: Capital Letters | [a]: Small Letters | [1] numbers | [%] symbols |
| А! European characters |
® Stamping Position - Placement
Upper right Center Lower left Lower right Upper left
* Type of Background of the letters to be stamped - Transparency
| [Opaque] | [Semi] | [Clear] |
* Color of the input letters to be stamped
| Red | Green | Blue | Cyan | Magenta | Yellow | Black | White |
+ Background color, if a background is provided.
Red | Green | Blue | Cyan | Magenta | Yellow | Black | White |
Stamping Date & Time And Text On A Picture
1 Show [Image Stamp] screen
Turn on the power supply and set the mode dial to the
capture mode mark.
— OPress the menu button, and the [Capture Settings]
menu appears.
(3Press the right arrow of the four-way controller twice,
and the [Image Stamp] menu appears.
@Press the lower arrow of the four-way controller, and
[Text] is displayed in highlighted text.
OPress the left soft key to select [Edit] on the soft menu.
The [Text Stamp] screen is then displayed.
[Image Stamp] menu
Cc
o.
=
O
<
95
=.
o
с
»
A
©
3
o
=
o
5
©
65
2 Enter letters to be stamped
Text Stamp
Text MIf the left and right arrows on the four-way controller are
pressed while the text stamp [Off] is displayed in
highlighted text, the text stamp [On] will be displayed
in highlighted text.
@pPress the left soft key to select the soft menu [Edit].
Press the left soft key to select the type of letters to be
input.
+ Available types of letters to be input
lt is possible to display a list of the following types of
letters to be input by pressing the left soft key.
[A] … Capital Letters |
[a] .... Small Letters
[1] .... numbers (1...0)
[%] ... symbols (/,&,#.etC.)
[A].... European characters
Screen with the stamp text function being
[On]
List of letters to be input
Text edit screen
Display area of input letters
66
4.Press the right soft key to select [Exit] on the soft menu.
You can now stamp input letters on a picture according
to the settings.
Press the up and down arrows on the four-way controller
to place the letter to be input in the frame Г ].
'5:The right arrow on the four-way controller is pressed,
letters will be displayed on the display area for input
letters.
fu]
SN Reference
* |f you want to delete the letters displayed on the
display area for input letters, press the left arrow on
the four-way controller to delete the last letter input.
* Press the center soft key to input a space.
'6:After inputting letters on the pictures, press the right
soft key to select the soft menu [Exit].
Stamping Date & Time And Text On A Picture
3 Setting the stamping format
Text Stamp
(Press the down arrow of the four-way controller while
the text stamp [On] is displayed in highlight text and
input letters are displayed. [Placement] is displayed in
highlighted text.
(Press the right and left arrows of the four-way controller
to select stamping position. |
[Text Stamp] screen after setting (Repeat the same procedure until the background of
letters, the color of the letters and the background
color are selected.
@ After setting up the necessary items, press the right
soft key to select [Exit] on the soft menu, and the
[Image Stamp] menu is displayed.
©
SS Reference
If you want to resume the initial state, press the left soft
key to select [Default] on the soft menu.
Press the right soft key to select [Exit] on the soft menu.
You can now stamp input letters on a picture according
to the settings.
+ Position :
You can set the position of the input letters to be stamped. Use the right and left arrows of the four-
way controller for selection. Each time you press the right arrow, the following stamping position
options will be displayed in this order:
[Upper Right] — [Center] — [Lower Left] — [Lower Right] — [Upper Left]
€ Background of Letters (Transparency)
When stamping letters on a picture, you can decide how the image corresponding to the input
letters to be stamped is handled. Use the right and left arrows of the four-way controller for
selection.
[Opaque] .. Background (or background color) is provided for the input letters to be stamped on a
picture.
[Semi] ....... A semi-transparent background (or background color) is provided for the input letters
to be stamped on a picture.
[Clear] ...... No background (or background color) is provided for the input letters on a picture
(ie, only the letters are stamped).
+ Color of Letiers
You can set the color of the letters to be stamped. Use the right and left arrows of the four-way
controller for selection. Each time you press the right arrow, the following choice of colors to be
set will be displayed in this order: |
[Red] — [Green] — [Blue] — [Cyan] — [Magenta] — [Yellow] — [Black] — [White]
+ Background color
When you select [Clear] for the background of letters, you can set the background color of the
letters. Use the right and left arrows of the four-way controller for selection. Each time you press
the right arrow, the following choice of colors to be set will be displayed in this order:
[Red] — [Green] — [Blue] — [Cyan] — [Magenta] — [Yellow] — [Black] — [White]
= Le +
©
>
67
suonoun4 snoueA buis
68
How to set a logo to be stamped on a picture - Logo
You can stamp a logo saved in the memory card on a picture.
À logo file is not attached with when the camera has just been purchased, so this function can not be
used at present.
* Retrieve the logo file
Retrieve the logo file in the memory card.
+ Stamping Position
Upper right Center Lower left Lower right Upper left
1 Show [Logo Stamp] screen.
Install the memory card containing the logo file.
'2:Turn on the power supply and set the mode dial to the
capture mode mark.
-3-Press the menu button, and the [Capture Settings]
menu appears.
4:Press the right arrow of the four-way controller twice,
[Image Stamp] menu and the [Image Stamp] menu appears.
‘51Press the lower arrow of the four-way controller twice,
and [Logo] is displayed in highlighted text.
'6:Press the left soft key to select [Edit] on the soft menu.
The [Logo Stamp] screen is then displayed.
Stamping Date & Time And Text On A Picture
2 Set the stamping format of the logo
MWhile the stamp logo function is [Off] and indicated in
highlighted text, press the right and left arrows of the
four-way controller, and the stamp text function [On] will
then be displayed in highlighted text. |
@Press the left soft key to select [Edit] on the soft menu,
and a logo file screen appears. |
[Logo Stamp) screen before set up Press the upper and lower arrows of the four-way
controller to display a logo file to be stamped in
highlighted text.
@ Press the left soft key to select [Select] on the soft
menu, and a check mark appears beside the file name.
O)Press the right soft key to select [Exit] on the soft menu,
and the selected file name is displayed to indicate the
logo stamp.
OPress the lower arrow of the four-way controller to
display [Placement] in highlighted text.
@ Press the right and left arrows of the four-way controller
to select the logo stamping position.
When you press the right arrow of the four-way
controller, the following stamping position options will
be displayed in this order:
[Upper right] > [Center] — [Lower Left] — [Lower
Right] — [Upper Left]
©
©.
>
©
<
5
=,
e]
=
©
TI
с
>
©
=
о
>
©
69
Screen with the stamp logo function being
[On] ® Press the right soft key to select [Exit] on the soft menu,
and [Image Stamp] menu appears.
#)
TADA:
If you want to resume the initial state, press the left soft
key to select [Default] on the soft menu.
@ Press the right soft key to select [Exit].
You can now stamp the logo on a picture according to ’
the settings. |
70
Changing The Settings Of Functions Of The Camera
Setting the brightness of LCD monitor, playback volume of the sound, and numbering of the pictures,
* Changing the display of the LCD monitor. ra” p.70
Setting the brightness of the screen, display duration of the Instant Review screen, whether the
Live View screen is displayed while a picture is taken, and the time until the system shifts to the
sleep timeout state.
Changing the playback volume and function sound. A p.72
Setting the playback volume of recorded sound and presence of system sounds such as sounds
emitted when the camera is operated a first time or the shutter is released.
Erasing all the data in the memory card. gg p.74
Erasing all the data stored in the memory card.
Setting the PC connect mode [2 р.125
When connecting this camera to a PC using a USB cable, set whether to have the PC recognize this
camera as one of the disc drives of the PC, or to Jet it operate using soft ware called Digita Desktop
which is installed in the PC.
Correcting date and changing the display mode of the date. LES” p.74
Setting the method for numbering pictures. ra p.76
Setting whether the numbering starts from [1] each time a blank memory card is set or the
number of times the shutter is released from the first time the camera starts operation is set as an
image number (cumulative count) on the picture regardless of the memory card is installed.
Naming the camera gg p.77
Allocate a name for the owner to the camera.
Specifying the language to be displayed. gg p.79
Setting a language (English/ French/German/Spanish/ ltalian/ Japanese) to be displayed on the
menu or as an error message.
Resetting the settings of the camera to the initial state gg p.80
Resetting the information set to the initial state, except for [Language], [Set date and time), [Video
output method].
Changing the display state of the LCD monitor - Display
Setting the brightness of the screen, duration for which the Instant Review screen is displayed, and
setting whether the Live View screen is displayed when the power is turned on.
#® Changing the brightness of the screen.
[1](Darkest) ... [4] (Standard) ... [7] (Brightest)
* Changing the duration of display of Instant Review screen.
[1 second] (Shortest) ... [30 seconds] (Longest), OFF (Not displayed)
* Displaying the Live View screen when a picture is taken.
[ON] Displayed, [OFF] Not displayed.
* Setting the time until the system changes over to the sleep timeout state when the camera is not
being operated.
[30 seconds] (Shortest) ... [5 minutes] (Longest)
Changing The Settings Of Functions Of The Camera
1 Showing the display screen
@Turn on the power and set the mode dial to the capture
mode mark.
Press the menu button to display the [Capture Settings]
menu.
(Press the right key of the four-way controller three times
to display the [Preferences] menu.
[Preferences] menu While [Display] is highlighted, press the left soft key to
select the soft menu [Edit].
The display screen appears.
2 Setting the display of LCD monitor
DWhile Brightness of screen [4] is highlighted, press the
left and right arrows on the four-way controller to select
the brightness of the screen of the LCD monitor.
@pPress the down arrow on the four-way controller to
highlight [Instant Review].
Press the left and right arrows on the four-way controi-
ler to select the time for which Instant Review is
displayed.
Use the same procedure to select [Live View] and
[Sleep Timeout].
® After setting the required items, pressing the right soft
key to select the soft menu [Exit] will return the screen
to the [Preferences] menu.
|
When resetting the system to the initial state, press the
left soft key to select the soft menu [Default].
Display screen
® Press the right soft key to select the soft menu [Exit].
A screen of the contents that are set is displayed on
the LCD monitor.
©
e.
3
CO
<
0
=.
©
©
mn
T1
©
3
o
=
©
>
7
71
72
* Brightness of the screen
Setting the brightness of LCD monitor. Press the left and right arrows on the four-way controller to
set the brightness.
[1] ... Set the brightness of the screen to darkest.
[4] ... Standard brightness of the screen
[7] ... Set the brightness of the screen to brightest.
* Instant Review
Setting the display time of the Instant Review (Instantaneous replay of pictures taken) that will be
displayed after a picture is taken. Set Instant Review with the left and right arrows on the four-way
controller.
[1 sec] - [10 sec] … It is possible to set the time by one second unit.
[10 sec] - [30 sec] … It is possible to set the time by 5 seconds unit.
[Off] ... No Instant Review screen is displayed after shooting.
* Live View screen
Setting whether the Live View screen is displayed when a picture is taken. Set by pressing the left
and right arrows on the four-way controller,
[Off] ... No Live View screen is displayed unless the display button is pressed in capture mode.
[On] ... A Live View screen is displayed when the mode dial is set to capture mode.
VENTE
* Please be careful to remember that the battery power will be used up quickly when pictures are
taken with the Live View screen displayed.
* Even if the display of the Live View screen is set to [Off] in capture mode. a Live View screen
will be automatically displayed when Macro mode (tú p-33). Manual focus mode (ga p.59),
Aperture priority mode (EE p.95). or Shutter priority mode ( ES p.55) is set or when each
function is set by pressing the menu button.
+ Sleep timeout
This sets the time until the system automatically changes to the sleep timeout mode when the camera
is not being operated and is set by pressing the left and right arrows on the four-way controller.
[30 sec], [1 min], {2 min], [5 min] … The system changes to the sleep timeout state once the set
time has elapsed.
fu
SC eme
The power is automatically turned off when further 5 minutes have elapsed after the system has
changed over to the sleep timeout state.
Changing the playback volume and function sound - Sound
This sets the playback volume, system sound volume, and whether system sounds such as starting
sounds and shutter sounds are emitted.
* Changing the volume
[1] (Smallest) ... [4] (Standard) ... [7] (Largest)
+ Presence of system sound
[On] Emitted, [Off] not emitted.
Changing The Settings Of Functions Of The Camera
1 Displaying the sound screen
MTurn of the power to set the mode dial to the capture
mode mark.
Press the menu button to display [Capture Settings]
menu. |
(Press the right key on the four-way controller three
times to display [Preferences] menu.
[Preferences] menu @ Press the down arrow on the four-way controller to
highlight [Sound]. |
@pPress the left soft key to select the soft menu [Edit].
A sound screen appears on the display.
©
©.
>
O
<
o
=,
Q
©
©
т
=
>
o
=r
o
>
©
73
2 Setting the volume and whether or not the system
sound is signaled
@While Volume [4] is highlighted, press the left and right
| arrows on the four-way controller to select the volume.
The volume is a volume when the recorded sound IS
replayed or a volume of system sound.
[1] ... Sets the volume lowest.
Sound screen [4] ... Standard volume
[7] ... Sets the volume largest.
Press the down arrow on the four-way controller to
highlight [System Sounds].
(Press the left and right arrows on the four-way control-
ler to select whether or not system sounds are emitted.
Setting the.system sound accompanying the operation
such as starting sound or shutter sound.
[Off] ... No operation sound is signaled.
[On] ... Operation sound is signaled.
@ Pressing the right soft key to select the soft menu [Exit]
will return the system to [Preferences] menu screen.
a
S Reference
When resetting the system to the initial state, press the
left soft key to select the soft menu [Defauit].
OJPress the right soft key to select the soft menu [Exit].
The volume is adjusted to the set contents.
74
Erasing all the data in the memory card - Formatting the card
Erasing all the data stored in the memory card
N Reference
* Do not remove the memory card while formattin
can not be used again.
g. Doing so may damage the memory card and
* If this operation is performed. all the protected pictures are erased. Be sure to backup the
required pictures on a PC.
[Preferences] setting menu
Changing the display mode of the date
Setting the display mode of the date - Set date and time
1 Formatting the card
'1:Set the memory card to be formatted.
2:Turn on the power to set the mode dial to the capture
mode mark.
‘3‘Press the menu button to display [Capture Settings]
menu.
4 Press the right key on the four-way controller three
times to highlight the [Preferences] menu.
'5:Press the down arrow on the four-way controller twice
to highlight [Format Card].
'6.Press the left soft key to select the soft menu [Format].
A format confirmation screen will appear on the
display.
7:When formatting, press the middle soft key to select
the soft menu [Format].
When canceling the format. press the right soft key to
select the soft menu [Cancel]
For the method of correcting the date. refer to [Setup guide].
* Setting the display mode
Month/Day/Year 24-hour display, Day/Month/Year 24-hour display, Day/Month/Year 12-hour
display, Year/Month/Day 24-hour display, Year/Month/Day 12-hour display
Changing The Settings Of Functions Of The Camera
1 Displaying the set date and time screen
(Turn on the power to set the mode dial to the capture
mode mark. |
Press the menu button to display [Capture Settings]
menu.
Press the right key on the four-way controller three
times to display the [Preferences] menu.
[Preferences] menu (Press the down arrow on the four-way controller four
| times to highlight {Date & Time].
OPress the left soft key to select the soft menu [Edit].
A set date and time screen appears on the display.
C
O.
3
©
<
0
=,
e]
Cc
A
Il
<
3
Q
=,
o
3
о
75
2 Setting the display mode
| Set Date & Time — (Press the left soft menu on the set date and time
VU Format: YY/MM/DD 24hr screen to select the soft menu [Format].
The [Format] screen appears on the display. The item
with check mark is the currently set display mode.
Press the down arrow on the four-way controller to
highlight the display mode to be set.
@pPress the left soft key to select the soft menu [Select].
Set date and time screen A selected display mode is set, with the set date and
Currently set display mode time screen displayed :
Pressing the right soft key to select the soft menu [Exit]
will return the system to [Preferences] menu screen.
Press the right soft key to select the soft menu [Exit].
The date is displayed with set contents.
[0 / #1 / 1
23 : 28
MM/DD/YY 12 hours
DO/MM/YY 24 hours
Mode screen
76
Setting the method for numbering pictures - Image numbering method
Set whether the numbering is started from [1] each time when a blank memory card is installed or
the number of times the shutter has been released from the first time when the camera is operated is
set as an image number (cumulative count) on the picture regardless of the memory card installed.
* Setting the method of numbering the pictures
Reset the count when the memory card is blank (pictures are numbered from 1 by each memory
card), cumulative count (the pictures taken with this camera are numbered serially)
1 Displaying the image numbering method screen
-1-Turn on the power to set the mode dial to the capture
mode mark..
-2:Press the menu button to display [Capture settings]
menu.
-3'Press the right key on the four-way controller three
times to display the [Preferences] menu.
[Preferences] menu ‘4Press the down arrow On the four-way controller five
times to highlight [Image Counter].
'5:Press the left soft key to select the soft menu [Edit].
The [ Image Counter] screen appears on the display.
2 Setting the numbering method
‘VPress the down arrow on the four-way controller to
highlight the picture numbering method to be set.
[Reset When Empty] ... Each time a blank memory
card where no images are recorded is installed, the
stored pictures are numbered from [1].
[Continues Counter] ... The number of times the shutter
is released from the first time the camera is operated is
set as an image number (cumulative count) on the
picture regardless of the memory card installed.
2\Press the left soft key to select the soft menu [Select].
The Preferences menu is displayed, with the selected
method being set.
3 Press the right soft Key to select the soft menu [Exit].
The pictures are numbered with the method set.
[Image Counter] screen.
Changing The Settings Of Functions Of The Camera
Naming the camera - Camera name
Allocating an owner name to the camera.
@pPress the right key on the four-way controller three
times to display the [Preferences] menu.
@ Press the down arrow six times to highlight [Camera
Name].
@pPress the left soft key to select the soft menu [Edit].
The [Camera Name] screen appears on the display.
| 1 Displaying the camera name screen 5
(©
Turn on the power to set the mode dial to the capture <
mode mark. =
Press the menu button to display the [Capture Settings] с
menu. N
=
a
=
=
en
2 Entering a camera name
When erasing the already entered characters, press
the left key on the four-way controller to erase the
characters one by one.
[+
\Y Reference
In the initial state, [Digital Camera] is displayed.
@pPress the left soft key to select the type of the charac-
ters to be entered.
[Camera Name] screen.
+ The types of the characters that can be entered.
Pressing the left soft key makes it possible to show
the following overview of the characters.
[1]... Numeric characters (1 - 0)
[A] ... Uppercase letter (A-Z)
[a] ... Lowercase letter (a - 2)
[%} … Symbol (, No, $, %, &, etc.)
[À] … European character
77
78
3'Press the up and down arrows on the four-way
controller to match [ ] to the character to be entered.
‘A:Press the right key on the four-way controller to display
the character on the input character display area.
ME Fute
When entering a space, press the center soft key.
5.Pressing the right soft key to select the soft menu [Exit]
after entering a camera name will return the system to
the [Preferences] menu.
The entered camera name is registered.
Changing The Settings Of Functions Of The Camera
Specifying the language displayed - Language
This sets the language (English/German/ French/Spanish/Italian/Japanese) to be displayed on the
menu or as an error message.
Cc
©.
1 Displaying the [Language] screen a
| <
a
Turn on the power to set the mode dial to the capture =
mode mark. E
Press the menu button to display the [Capture Settings] a
menu. - 2
=
=
. ©
Press the right key on the four-way controller three
times to display the [Preferences] menu.
[Preferences] menu | @ Press the down arrow on the four-way controller seven
times to highlight the [Language] menu.
®Press the left soft key to select the soft menu [Edit].
The [Language] screen appears on the display.
| 2 Setting the [Language]
(DPress the down arrow on the four-way controller to
highlight the language to be set. |
(English] ... A menu or message is displayed in
English.
@ Pressing the left soft key to select the soft menu
[Select] will return the system to the [Preferences]
menu.
Press the right soft key to select the soft menu [Exit].
A menu or message is displayed in the language set.
[Language] screen
79
80
Resetting the setting of the camera to the initial state - All reset
Resetting the set information to the initial state.
1 Resetting the setting to the initial state
1 Turn on the power to set the mode dial to the capture
mode mark.
'2:Press the menu button to display the [Capture Settings]
menu.
‘3:Press the right key on the four-way controller three
times to display the [Preferences] menu.
Preferences] menu -4:Press the down arrow on the four-way controller eight
times to highlight [Reset Settings].
5:Press the left soft key to select the soft menu [Reset].
The reset confirmation screen appears on the display.
2 Resetting the setting to the initial state
"1.When resetting the information set to the initial state
except for [Language], [Set date and time], [Video
output method], press the center soft key to select the
soft menu [Reset].
rs (очей | The Preferences menu is displayed, with the set
information reset to the initial state.
When canceling the operation, press the right soft key
to select the soft menu [Cancel], with the Preferences
menu displayed.
fa]
N Reference
Even if the reset setting function is operated, the
setting information for [Language], [Set date and time],
and [Video output format] will not be reset.
Reset confirmation screen
2 Press the right soft key to select the soft menu [Exit].
Application For Review Mode
Function
Page
Playing Pictures One By One............ RE SERRES 82
Continuous Play With Automatic Switching ............=-—..-——— == nesneneneno een. 84
Displaying picture as slideshow (Continuous play) ..............—..-.———mmeee 85
Playing pictures taken in Timelapse Shooting Mode or pictures grouped
continuously and automatically. ....... tees 88
Playing Pictures One By One
Play the pictures saved in the memory card one by one.
SS Reference
Please refer to the basic operation [Presenting pictures on a television] (ra p.20) regarding
how to play on a TV monitor. This description will explain only the way to play pictures on the
LCD monitor of the camera.
1 Displaying presentation screen
11:Set the memory card saving pictures you wish to play.
2'Turn on the power supply and turn the mode dial to the
Presentation Mode (©).
The presentation screen will be displayed.
31f the right arrow on four-way controller is pressed, the
next picture will be displayed.
SS Reference
Press the right soft key to select the menu [Expand] to
display stored pictures taken in the timelapse mode or
grouped pictures.
2 Picture enlargement
1 1f the soft menu [Zoom] is selected by pressing the
middle soft key, pictures will be enlarged.
It 1s possible to see the parts of the enlarged picture
out of the screen by scrolling the up, down. left and
right arrows on four-way controller.
2 Select the soft menu [Zoom Out] by pressing the
middle soft key to return to the initial display.
82
Playing Pictures One By One
3 Sound play
If there is recorded sound, and the soft menu [Play] by
pressing the left soft key, the recorded sounds will be
played.
Regarding operation on the presentation screen
+ Information displayed on the presentation screen
К information display
EET Image number, the date and time when pictures are
© taken, symbol mark, capture mode (One Shot
Shooting Mode / Continuous Shooting Mode/
Timelapse Shooting Mode}.
Soft Menu
— [Play], Zoom] or (Expand]/[Collapse] will be
displayed.
>
©
=
=
O
=
©
=
т
o
—
D
D
<.
©
=
<
©
o
D
T
=
=
o
=.
©
=
83
+ Switching Display of Presentation Screen
it is possible to switch over whether or not to display the information display and the soft
menu. |
Pa
-
- Displaying the information display and the Canceling display of the information display
soft menu. and the soft menu.
Displaying the soft menu.
Continuous Play With Automatic Switching
Pictures can be played continuously by (Slideshow) switching over between all and each different
category of pictures saved in the memory card automatically or by playing a series of pictures taken
in Timelapse Shooting Mode or pictures grouped.
* Displaying Picture As Slideshow (Continuous Play) ré p.85
Playing all pictures continuously
* Playing pictures taken in Timelapse Shooting Mode or pictures grouped continuously ta” р.88
Playing pictures taken in Timelapse Shooting Mode.
84
Continuous Play With Automatic Switching
Displaying picture as slideshow (Continuous play)
The pictures saved in the memory card can be displayed continuously by all or each different
category of pictures. |
ВЕТРЫ 1 Displaying presentation screen
Set the memory card saving pictures you hope to see
as a slideshow.
@Turn on the power supply and turn the mode dial to the
presentation mode (le).
The presentation screen will be displayed.
2 Displaying [Slideshow] setting screen
Mf the menu button is pressed, the [Play Settings] menu
will be displayed. | |
— OSelect the soft menu [Edit] by pressing the left soft key
while displaying [Slideshow] in highlighted text
3 Setting Item
(DPress the up and down arrows on four-way controller to
display items to be set in highlighted text. |
OPress the left and right arrows on four-way controller to
display setting [Content].
+ Content
. Select the [Content] to be played as a siideshow.
— Press the left and right arrows on four-way controller to
“select [All] or [Category].
[Al] ... playing all pictures in Slideshow saved in the
memory card.
[Category] ... playing pictures only with assigned
category (symbol) as a slideshow. After selecting
[Category], press the down arrow on four-way control-
ler to move the cursor to the category setting column
and press the left and right arrows on four-way
controller to select a particular category.
>
5
©
=
0
=
o
3
TI
©
„X
py
®
|<.
©
<
=
о
a
®
т
©
3
a
=
3
85
86
+ Duration
Set [Duration] for playing pictures as a slideshow. Set
Duration from 1 to 10 seconds by pressing the left and
right arrows on four-way controller. The default setting
IS 2 seconds.
a
N Reference
If there is recorded sound, the screen will be switched
after the sound are played.
+ Sound
Set whether or not to play recorded sound or system
sound. Press the left and right arrows on four-way
controller to select [On] or [Off].
+ Loop
Set whether or not to repeat playing pictures when
finishing to play all pictures designated in [Content].
Press the left and right arrows on four-way controller to
select [On] or [Off].
4 Starting up slideshow
1:1f the soft menu [Start] is selected by pressing the left
soft key, the slideshow will be started with the set
content.
“2:1f the soft menu [Stop] is selected by pressing the left
key, the screen will be return to the [Slideshow] screen
and the set can be reset.
Continuous Play With Automatic Switching
Information display
Image NO, the date and time when pictures are
taken, symbol mark, capture mode (One Shot
Shooting Mode,/ Continuous Shooting Mode/
Timelapse Shooting Mode).
#
£
$
+ Soft Menu
Soft menus will be displayed.
* Switching Display of Slideshow
It is possible to switch over whether or not to display the information display and the soft
menu.
uon9ung apo Mene 104 uoneol|ddy
Displaying the information and the soft Canceling the information display and the
menu. soft menu.
Displaying the soft menu.
87
Playing pictures taken in Timelapse Shooting Mode or pictures grouped continuously and automatically
It is possible to play pictures continuously and automatically which are taken in Timelapse Shooting
Mode, or pictures grouped by setting the interval for playing pictures.
It is possible to play pictures which are taken in the timelapse shooting mode, or pictures grouped,
continuously and automatically one by one differently from the Slideshow function.
Setting Playback Rate
00/4/23 34а 1 Displaying [Presentation Screen]
Set the memory card saving pictures you wish play.
-2-Turn on the power supply and turn the mode dial to the
presentation mode (=).
The presentation screen will be displayed.
Displaying [Presentation Rate] setting screen
LIf the menu button is pressed, [Play Settings] menu will
be displayed.
Press the down arrow on the four-way controller to
display [Playback Rate] in highlighted text.
31 the soft menu [Edit] is selected by pressing the left
soft key, [Playback Rate] setting screen will be
displayed.
Setting [Playback Rate]
Set playback rate (1-10 seconds) for the pictures taken
in the timelapse shooting mode by pressing the left
and right arrows on the four-way controller while
displaying [Timelapse] on the screen in highlighted
text.
:2'Press the down arrow on the four-way controller to
display [Group] in highlighted text.
3Press the left and right arrows on the four-way control-
ler to set Playback rate (1-10 seconds) for the pictures
grouped.
If the soft menu [Exit] is selected by pressing the right
soft key, [Play Settings] menu will be returned to.
5:1f the soft menu [Exit] is selected by pressing the right
soft key, it is possible to play the pictures taken in the
timelapse shooting mode and the pictures grouped at
the set playback rate.
88
Continuous Play With Automatic Switching
Eh TIS IVE YY DEIS у $
1 Selecting picture
~~
MD Set the memory card saving pictures you wish to play.
@ Turn on the power supply and turn the mode dial to the
presentation mode (IJ).
The presentation screen will be displayed.
(Press the left and right arrows on four-way controller to
select the pictures taken in the timelapse shooting
mode or grouped.
2 Picture presentation
Dif the soft menu [Play] is selected by pressing the left
soft key, pictures, which taken in the timelapse
shooting mode or grouped, will be played automati-
cally at the set playback rate.
a
SN Reference
To cancel playing, press the left soft key to select the
soft menu [Stop].
89
>
oO
=
5
bY)
=
©
=
TI
о
=
D
D
=.
©
=
=
о
Q
au
n
<
=
o
=
о
=
90
Sound recording
1 Displaying edit screen
Dinstall the memory card holding pictures you wish to
record.
@ Turn on the power supply and turn the mode dial to the
review mode (#3).
The pictures saved in the memory card will be
displayed.
(DPress the left and right arrows on the four-way control-
ler to scroll the pictures until the cursor points to the
picture for which sound is to be recorded.
OIf the sound record button is pressed, a recording will
be started.
Sound record button.
EY» cuore
U
CD CD
If the sound record button is pressed again after
recording sound, recording will be terminated and a
confirmation screen for sound recording will be
displayed. | |
@ To confirm the recorded sound, press the left soft key
to select the soft menu [Play].
(® To delete the recorded sound, press the center soft key
to select the soft menu [Delete].
94
Basic Operation For Review Mode
It is possible to display the pictures taken in the continuous shooting mode, the timelapse shooting
mode or the pictures grouped together on the edit screen by displaying the first picture in a group of
stored pictures (Collapse) or displaying all stored pictures at once (expand).
Grouped pictures e.g. If pictures are displayed on the edit screen...
1 Scroll the pictures until the cursor points to the pictures
taken in the continuous shooting mode or the timelapse
shooting mode or the pictures that are grouped
together.
[Collapse] will be displayed in the soft menu.
'2:Press the right soft key to select the soft menu [Col-
lapse].
Pictures displayed will be stored in the first picture.
3 If the soft menu [Expand] is selected by pressing the
right soft key, the screen of operation '1: will be
returned to and the pictures will be expanded.
>
3
au
=
O,
3
o
LD
O
—
<
=
D
=
=
D
D
<.
D
=
<
©
QQ
D
93
Regarding the edit screen.
Picture ‘nformation displayed on the edit screen is as follow
The list screen:
Displaying pictures four at a time. Switch the
display by pressing the left and right arrows on
the four-way controller.
recording and category information using icons.
Image Number:
Display image numbers
Date 4 Time:
Display the date and tme when pictures are
taken.
Icon display:
Display:ng types of pictures (One Shot Shooting
Mode. Continuous Shooting Mode, Timelapse
Shooting Mode, pictures that are grouped). sound
Zoom: Setting information:
Eniarge pictures selected by the Display a group name of pictures are collected
cursor. This function is helpful to nto a group and a key symbol if pictures are
fird the onertation (vertical or protected
hor:zontal) of a picture.
92
Basic Operation For Review Mode
Check the pictures saved in the memory card on a list. |
Itis possible to record sound for pictures selected with the cursor.
Checking pictures on a list
Check pictures saved in the memory card on a list.
1 Displaying edit screen
(Dinstall the memory card holding pictures you wish to
check.
@ Turn on the power supply and turn the mode dial to the
Review Mode (E).
The pictures saved in the memory card will be
displayed on the edit screen.
2 Checking picture taken
(DIF the left arrow on the four-way controller is pressed,
each picture will be scrolled in from the left side and
displayed.
If the right arrow on the four-way controller is pressed,
each picture will be scrolled in from the right side and
displayed. :
Arranging Picture With Review
Mode
Page
Basic Operation For Review Mode
Checking pictures on a list eee eeLrrrmeeriereo, 92
SOUNd FECOrAING ae eo eéa eee area eee re renrare re ereereLos 94
Deleting Picture Taken
Delete pictures taken one by one ia aerea rarereo. 95
Deleting selected pictures rer eneeeerearreare er eees 96
Making it impossible to delete pictures - Protection ....................oocoi 98
Categorizing Pictures
Classifying pictures by category - Category 0 102
Group classification - Group... 103
Searching Taken Pictures
Searching picture by date reee eee me eeeo, 110
Searching by category... ae erLenr reriraeeeerea, 112
Deleting Picture Taken
Deleting Picture Taken
It is possible to delete pictures one by one or delete a number of pictures at the same time.lt is also
possible to protect pictures selected so as not to be deleted.
N Reference |
Please delete all pictures saved in the memory card by referring to [Delete all memory card
data -Format Card]. ( ra p.74)
* Deleting pictures taken ( rg p.95)
Delete pictures selected one by one.
e Deleting selected pictures( ra p.96)
Deleting all pictures selected on the edit screen.
e Making it impossible to delete pictures (gs p.98)
Protect pictures
Delete pictures taken one by one
Delete the pictures where the cursor is positioned among pictures displayed on the edit screen.
эроуу мемен UHM Ini9Ig BuiBuesy
1 Displaying review screen
MDinstall the memory card holding pictures you wish to
delete.
@ Turn on the power supply and turn the mode dial to the
review mode (FF).
@pPictures saved in the memory card will be displayed on
the review screen.
95
96
ven wi & ® 2 Deleting picture
-1-Press the left and right arrows on the four-way control-
ler so that the cursor points to the pictures to be
deleted.
Reference
The pictures protected (with a key symbol at the
bottom right of the screen) can not be deleted even if a
delete operation is executed.
To delete protected pictures, cancel the protection
( Ka” P.99) and follow the operations for deleting
pictures.
‘2:Press the middle soft key to select the soft menu
[Delete].
The screen for confirming whether or not to delete the
picture.
'3:1f the soft menu [Delete] is selected by pressing the left
soft key, the pictures where the cursor is positioned will
be deleted and the edit screen will be returned to.
To cancel deletion of a picture, press the right soft key
to select the soft menu [Cancel].
Deleting selected pictures
Delete all of the selected pictures among the pictures displayed on the edit screen.
1 Displaying review screen
“T:Install the memory card holding pictures you wish to
delete.
2 Turn on the power supply and turn the mode dial to the
review mode (9).
'3'The pictures saved in the memory card will be
displayed on the review screen.
‘TPress the left and right arrows on the four-way control-
ler to scroll the pictures until the cursor points to the
picture you wish to delete.
Deleting Picture Taken
@Press the left soft key to select the soft menu [Mark].
The bottom right of the picture selected will be clipped
off and [Unmark] will be displayed in the soft menu.
(3 Select all of the pictures you wish to delete by repeat-
ing the above operations.
To unmark the pictures selected once, press the left
soft key to select the soft menu [Unmark].
a й
RA RE
The protected pictures (with a key symbol at the
bottom right of the screen) can be selected but not
deleted even if a delete operation is executed.
To delete protected pictures, cancel the protection
( 1 p-99) and follow the operations to delete pictures.
Selecting or deselecting the pictures altogether
e If you want to select all the pictures at once in an edit screen, press and hold soft menu
[Mark] for more than three seconds and release it when the soft menu is changed into
[Mark All].
« If you want to deselect all the pictures, on the other hand, press and hold soft menu
[Unmark] for more than two seconds and release it when the soft menu is changed into
[Dissolve All] .
>>
=
a
=
©.
3
©
y
D
—
<
~~
D
=
mu
a
<.
“D
=
=
©
©
© .
97
3 Deleting selected pictures
(DIf the menu button is pressed, the [Edit] menu will be
displayed.
Press the middle soft key to select the soft menu
[Delete] while displaying [Delete] in highlighted text.
The screen for confirming whether or not to delete the
selected pictures.
DI the soft menu [Delete] is selected by pressing the left
soft key, the selected pictures will be deleted and the
edit screen will be returned to. |
To cancel a deletion, press the right soft key to select
the soft menu [Cancel].
98
Making it impossible to delete pictures - Protection
Set to protect pictures so that pictures can not be deleted even if operations for deletion are executed.
2
N Reference
If the memory card is reformatted, protected pictures will be deleted even if they are protection.
Protecting picture
1 Displaying edit screen
‘Install the memory card holding pictures you wish to
protect.
12: Turn on the power supply and turn the mode dial to the
review mode (E). `
3'The pictures saved in the memory card will be
displayed.
2 Select picture you wish to protect
.1 Press the left and right arrows on the four-way control-
ler so that the cursor points to the pictures you wish to
protect.
2 Press the left soft key to select the soft menu [Mark].
The bottom right corner of the pictures selected will be
clipped off and [Unmark] will be displayed in the soft
menu. |
‘3'Select all of the pictures you wish to protect by
repeating the above operations.
To cancel the pictures selected once, press the soft
key to select the soft menu [Unmark].
Deleting Picture Taken
3 Protecting picture selected
(DIf the menu button is pressed, the [Edit] menu will be
displayed.
Alt the down arrow on the four-way controller is pressed
twice, [Protect] will be displayed in highlighted text.
(Press the middle soft key to select the soft menu
[Protect].
Protection will be set for the selected pictures and the
protection symbol (key) will be displayed at the right
bottom of the edit screen.
1 Displaying edit screen
MDinstall the memory card holding the pictures for which
you wish to cancel protection.
@ Turn on the power supply and turn the mode dial to the
review mode (E).
The pictures saved in the memory card will be
displayed on the review screen.
2 Selecting picture for which protection is to be
cancelled
(DPress the left and right arrows on the four-way control-
ler to scroll the pictures until the cursor points to the
picture you wish to cancel protection for.
epoyy meney UNM elnjId BuBuely |
99
100
'2'Press the left key to select the soft menu [Mark].
The bottom right corner of the picture will be clipped
off and [Unmark] will be displayed on the soft menu.
'3:Select all pictures you wish to cancel protection for by
repeating the above operation .
To cancel pictures selected once, press the left soft key
to select the soft menu [Unmark].
3 Protection cancellation
1:1f the menu button is pressed, the [Edit] menu will be
displayed.
‘2 the down arrow on the four-way controller is pressed
twice, [Protect] will be displayed in highlighted text,
'3:Press the left soft key to select the soft menu
[Unprotect].
The protection of the selected pictures will be canceled
and the protection symbol (key) will disappear from the
bottom right of the edit screen.
Categorizing Pictures
Categorizing Pictures
It is possible for pictures saved in the memory card to be classified by being given an icon of that
particular category or collected into one group by being given a name.
+ Classifying pictures by category gg p.102
Category- Pictures with [Scenery]
Grouped pictures
Collapse screen Expand screen
Grouped pictures
Collapse screen Expand screen
101
>
3
QO
=
©.
=
o
v
©
—
=
==
©
=
=
2
=.
D
=
<
о
oO
CD
102
Classifying pictures by category - Category
Classify pictures saved in the memory card by being given an icon of that particular category.
1 Displaying edit screen
Install the memory card holding the pictures you wish
to attach an icon to.
2 Turn on the power supply and turn the mode dial to the
review mode (#7).
3'Pictures saved in the memory card will be displayed on
the edit screen.
.1:Press the left and right arrows on the four-way control-
ler to scroll the pictures until the cursor points to the
picture you wish to give an icon for.
‘2.Press the left soft key to select the soft menu [Mark].
The bottom right corner will be clipped off and
[Unmark] will be displayed on the soft menu.
-3-Select all pictures you wish to attach an icon to by
repeating the above operations.
To cancel the pictures selected once, press the soft
key to select the soft menu [Unmark].
3 Attaching icon to selected pictures
Cf the menu button is pressed, the [Edit] menu will be
displayed.
2:If the down arrow on the four-way controller is pressed
three times, [Categorize] will be displayed in high-
lighted text.
Categorizing Pictures
Alf the soft menu [Edit] is selected by pressing the left
- soft key, the [Categorizes] screen will be displayed.
@ Press the down arrow on the four-way controller to
display the icon to be attached to pictures in high-
lighted text.
Of the soft menu [Select] is selected by pressing the left
soft key, the selected icon will be set on the picture and
the edit screen will be returned to.
“Pictures to which an icon of an assigned category is
attached can be displayed in different categories on
the edit screen using the searching operations.
(1 p.112)
Pictures saved in the memory card can be collected into one group, assigned a name and saved. It is
possible to add pictures taken previously into a registered group or to make a new group to be
registered and save the pictures in the new group.
>
D
=
Q
=
o
3
=
<
a
©
=
=
N
D
=.
[42]
=
=
o
o
©
1 Displaying edit screen
MInstall the memory card holding pictures you wish to
register a group name for. |
@ Turn on the power supply and turn the mode dial to the
review mode (#5). |
(Pictures saved in the memory card will be displayed on
the edit screen.
103
2 Selecting pictures to be assigned a group name
-1:Press the left and right arrows on the four-way control-
ler to scroll the pictures until the cursor points to the
picture you wish to register a group name for.
-2:Press the left soft key to select the soft menu [Mark].
The bottom right corner will be clipped off and
[Unmark] will be displayed in the soft menu.
'3:Select all pictures you wish to register a group name
for by repeating the above operations.
To cancel a picture selected once. press the left soft
Key to select the soft menu [Unmark].
3 Displaying screen for group name input
1.1f the menu button is pressed, the [Edit] menu will be
displayed.
12:1f the down key on the four-way controller is pressed,
[Group] will be displayed in highlighted text.
+ When inputting a group name for the first time
'3:1f he soft menu [Create] is selected by pressing the left
soft key, the screen for inputting a [Group name] will be
displayed.
+ When registrations of group names are existed
'4:1f the soft menu [Add] is selected by pressing the left
soft key, the screen for [Add To Group] will be dis-
played.
104
Categorizing Pictures
~ @If the soft menu [Create New] is selected by pressing
the middle soft menu, the screen for inputting a group
name will be displayed. |
4 Input group name
(MPress the up and down arrows on the four-way
controller to scroll the characters until the character
you wish to input is placed within the frame [ ] and
displayed in highlighted text, and press the right arrow
on the four-way controller.
The characters displayed in highlighted text will be
input.
(2) Repeat the same operations to input group names.
If characters are input incorrectly, press the left arrow
on the four-way controller to delete the last character
input. |
After input of group names, press the right soft key to
select the soft menu [Exit].
The group name is registered for the selected picture
and the [Edit] screen will be returned to.
[#)
\ Reference
When the review mode screen is displayed, if the soft
menu [Exit] is selected by pressing the right soft key,
the group name is registered for the selected picture
and the [Edit] screen will be returned to.
>
=
-
5
=
O.
=
<
2
Q
€
=
D
=
=
D
MD
=.
®
=
=
oO
Oo
©
105
Groupe name
106
Collapsing expanded pictures
When pictures that are grouped together are displaved on the edit screen, it is possible to display
them by collecting all pictures together with the first picture (collapse) or to displaying all stored
pictures (Expand).
Grouped pictures
1 Collapsing expanded pictures
1 Scroll the pictures until the cursor points to the pictures
that are grouped together.
[Collapse] will be displayed on the soft menu.
'2:1f the soft menu [Collapse] is selected by pressing the
right soft key. the expanded pictures will be collapsed
to the first picture.
2 Expanding collapsed pictures
VScroll the pictures until the cursor points to the pictures
that are grouped together.
[Expand] will be displayed on the soft menu.
-2:If the soft menu [Expand] is selected by pressing the
right soft key, the collapsed pictures will be expanded.
Categorizing Pictures
1 Displaying review screen
OInstall the memory card holding pictures you wish to
add into a group.
@Turn on the power supply and turn the mode dial to the
review mode (E).
Pictures saved in the memory card will be displayed.
£
ñ
2 Selecting picture to add into group
(DPress the left and right arrows on the four-way control-
ler to scroll the pictures until the cursor points to the
picture you wish to add into a group.
Press the left soft key to select the soft menu [Mark].
The bottom right corner will be clipped off and
[Unmark] will be displayed on the soft menu.
Select all pictures you wish to add into a group by
repeating the above operations.
To cance! the picture selected once, press the left soft
key to select [Unmark] on the soft menu.
apolAj Melney UNAA e1niPId BuiBuely
3 Selecting name of group to add to
(DIf the menu button is pressed, [Edit] will be displayed.
107
'2'If the down arrow on the four-way controller is pressed.
[Group] will be displayed in highlighted text.
-3:If the soft menu [Add] is selected by pressing the left
soft key. the [Add To Group] screen will be displayed.
4.1f the group names are scrolled until the cursor points
to the name of a group to add to, and the soft menu
[Select] is selected by pressing the left soft key, the
[Edit] screen will be returned to.
'5:f the soft menu [Exit] is selected by pressing the right
soft key, the pictures selected will be added into the
designated group.
ай oil Г
Mork Delete
108
Categorizing Pictures
1 Displaying review screen
Olnstall the memory card holding pictures you wish to
add into a group.
@Turn on the power supply and turn the mode dial to the
review mode (E).
Pictures saved in the memory card will be displayed on
the review screen.
2 Selecting a picture to cancel group
Press the left and right arrows on the four-way control-
ler to scroll the pictures until the cursor points to the
picture you wish to cancel the group. By selecting only
one picture of the group, you wish to cancel, it is
possible to cancel the group.
3 Canceling group
>
=
D
=
e
3
<
y
o
—
с
=
M
=
DU
OD
<.
D
=
<
о
a
D
109
If the menu button is pressed, the [Edit] menu will be
displayed. |
DI the down arrow on the four-way controller is pressed,
[Group] will be displayed in highlighted text.
If the soft menu [Dissolve] is selected by pressing the
center soft key, the selected group will be canceled.
Searching Taken Pictures
It is possible to search and display a picture saved in the memory card by designating date or
category (Symbol Icon).
* Searching picture by date
Display pictures by date.
* Searching picture by category
Display pictures by symbol icon
Searching picture by date
lt is possible to search and display only pictures taken on designated date from among pictures saved
in the memory card.
1 Displaying edit screen
Install the memory card holding the pictures you wish
to search.
2-Turn on the power supply and turn the dial mode to the
review mode (#7).
'3:Pictures saved in the memory card will be displayed.
2 Displaying [By Date] setting screen
(I the menu button is pressed, the [Edit] menu will be
displayed.
2'If the right arrow on the four-way controller is pressed
three times, the [Find] menu will be displayed and [By
Date] will be displayed in highlighted text.
'3:1f the soft menu [Edit] is selected by pressing the left
soft key, the [Find By Date] screen will be displayed.
110
Searching Taken Pictures
3 Input date to search
” | From (Year of [From] is displayed in highlighted text.
| E Y Press the up and down arrows on the four-way
To: controller to designate the year in which the picture
E 08 / e5 / 12 was taken.
В When it is not necessary to change, press the right
arrow on the four-way controller to display [Month] in
highlighted text.
| After inputting a day, finish by setting Year/Month/Day
. in [From] by repeating the above operations.
| Find By Date [From] by repeating the above op
: To designate only one day, input the same year/month/
a om day in both [From] and [To].
08 / 84 / 73 ~—
To
ев / в / ЕВ
in this operating manual, the method for inputting date
is explained only for the initial date display format. A
display format of year, month and day can be set by
selecting [Date] from the Preferences menu in the
Capture mode.
4 Starting search
(DPress the left soft key to select the soft menu [Find].
The pictures within the designated date range will be
displayed on the search list screen.
@To display all pictures, press the center soft key to
select the soft menu [Show All}.
Terminate the search list screen and return to the edit
screen.
@ i |
SN Reference |
It is also possible to perform edit operations on the
search list screen in the same way as on the edit
screen.
>
=
5
I
Q
3
<
v
a
E
=
D
5
2
D
=.
Dv
=
=
o
a
(D
111
112
Searching by category
It is possible to search and display pictures by particular categories from among the pictures saved in
the memory card.
1 Displaying edit screen
(TInstall the memory card holding pictures you wish to
search.
'2:Turn on the power supply and turn the mode dial to the
review mode (E).
3 Pictures saved in the memory card will be displayed.
2 Displaying [By Category] setting screen
11:1f the menu button is pressed, [Edit] menu will be
displayed.
-2:1f the right arrow on the four-way controller is pressed
three times, the [Find] menu will be displayed. If the
down key on the four-way controller is then pressed,
[Category] will be displayed in highlighted text.
ЗН пе soft menu [Edit] is selected by pressing the left
soft key. the [Find By Category] setting screen will be
displayed.
3 Designating category to search
1'Press the down arrow on the four-way controller to
display the category you wish to find in highlighted
text.
Searching Taken Pictures
(IF the soft menu [Select] is selected by pressing the left
soft key, the pictures to which a designated icon of that
— particular category is attached will be displayed on the
RL ae | search list screen.
wl La EU | Ld 4 @To display all pictures, press the middie soft key to
Ш Ie select the soft menu [Show All].
Terminate the search list screen to find pictures and
return to the edit screen.
a
SN Reference
It is possible to perform edit operations on the search
list screen in the same way as on the edit screen.
РО
В
Li
>
=
D
=
©.
=
o
J
Q
с
-
CD
=
=.
D
“D
=.
D
=
<
©
©.
{D
113
114
Printing Or Other Processes
Using Other Devices
Page
Printing The Pictures You Have Taken
Print order using DPOF compatibilityY ........044.404404404rrrr rer EEE EEE EEE 116
Printing using a JetSend compatible printer .....................--. eme 121
Viewing And Processing The Pictures You Have Taken On A PC
Before connecting the camera and a PC ...................e2e=e2000000e 124
Setting the PC connect MOdE ‚4.0.0.0... rer EEE EEE HEHE 125
Connecting with a PC ..............eee eee een ere 126
Transmitting/Receiving Pictures To/From Other Cameras Having Digita
Installed | |
То (тапегтИ р1С1иГ@$ .......сееоеосеенноенннанннееннзненеененненеенннзенееенннннн A 127
To receive pictures .…….….....….….….…eerserennennnnçençenennnnnnnnnnnnnnnens eee 129
Running A SCPE «veces ees 131
Printing The Pictures You Have Taken
Pictures saved in the memory card can be printed as ordered by DPOF compatible printers and a
laboratory print service, and can also be directly printed using HP JetSend compatible printers.
SN Reference
What is DPOF?
DPOF (abbreviation for Digital Print Order Format) is a format needed to record print specifica-
tion information (the picture you want to print, the total number of pictures or date print neces-
sity) which is needed to print pictures taken by a digital camera, or to have them printed in
laboratory service shops.
If you save the print specification information on to Memory card in DPOF format, and take it to
a DPOF compatible printers or to a laboratory print service, they will be printed as specified in
the print order information.
Print order using DPOF compatibility
When having the pictures taken by this camera printed by DPOF compatible printers or by a
laboratory print service, pictures to be printed, the total number of pictures and type of print (index
print or standard print) can be set, and the above information can be saved on the memory card. It is
also possible to check and delete the print order information.
Print order using DPOF compatibility
Specify which picture you would like to be printed and the total number of pictures, and type of print
(index print or standard print), and save the information on the memory card.
1 Displaying edit screen
‘install the memory card on which the pictures to be
printed are saved.
2 Turn on the power supply and turn the mode dial to
select review mode (#7).
Pictures saved on the memory card will be displayed
On the edit screen.
Selecting a picture
1Press the left and right arrows on the four-way control-
ler and scroll the pictures until the cursor points to the
picture to be selected.
116
Printing The Pictures You Have Taken
Press the left soft key to select the soft menu [Mark].
The lower right of the selected picture will be clipped
and the soft menu [Unmark] is displayed.
(Repeat the same procedure until all the pictures to be
printed are selected.
To cance! a picture that has been chosen, press the left
soft key to select the soft menu [Unmark].
e When selecting pictures, please sort out the pictures
by same number of pictures, print on index, and
standard print out.
e if the collapsed Timelapse shooting or group shooting
is selected, all the pictures collapsed will be printed. If
selecting Timelapse shooting and group shooting
separately, press the right soft key and select the soft
menu [Expand] and expand and select the pictures
from among the collapsed group.
3 Displaying [Add Images] on the screen
Press the menu button to display the [Edit] menu.
@ Press the left key on the four-way controller to display
[Print Order Form] and [Add images] will be displayed
in highlighted text.
Press the left soft key to select the soft menu [Add].
[Add to Order] will be displayed.
TV
=.
>
=.
=
o
O
=
Q
—
=
D
=
U
=
©
©
(D
NA
0
D
En
с
O.
=
<
©
=>
D
-
JJ
D
<.
o
©
wm
117
4 Setting the size and the total number of pictures to
be printed
1:While displaying [Copies] in highlighted text, press the
left and right arrows on the four-way controller to
display the total number of pictures to be printed.
The number of pictures can be set from 0 to 10.
However, the default is set at 1, and the previous
number of pictures will not be displayed.
‘2 Press the down arrow on the four-way controller to
display [Size] in highlighted text.
3 Press the left and right arrows to select whether to print
the selected pictures in [Index] format or in [Standard]
size.
4:Press the left soft key to select the soft menu [Add].
This will return to [Print Order Form] on the menu
screen after saving the printer selection information on
the memory card.
| ‘5/Press the right soft key to select the soft menu [Exit],
7 View Order and it will return to the edit screen.
ni Repeat the same procedure and select the pictures
Ad Eat | and the total number of pictures, and the type of print
(index print or standard print) for the DPOF compatible
printer or a laboratory printing service.
118
Printing The Pictures You Have Taken
Check the printer selection such as pictures, the total number of pictures, the type of the print (index:
print or standard print).
1 Displaying the edit screen
(DSet the memory card on which the printer selection
information is saved.
@Turn on the power supply and turn the mode dial to
select review mode (E).
Pictures saved on the memory card will be displayed
on the edit screen.
2 Displaying [View Order] screen
(DPress the menu button to display [Edit].
OPress the left arrow on the four-way controller to display
[Print Order Form].
(Press the down arrow on the four-way controlier to
display [View Order] in highlighted text.
@ Press the left soft key to choose the soft menu [Select]
[Print Order Form] will be displayed.
3 Checking the print setting information
(Don the [Print Order Form] screen, the picture No., the
total number of pictures and [Standard] and [Index] as
the printing method are displayed.
Press the up and down arrows on the four-way
controller to check if the picture No., the total number
of pictures and [Standard] and [Index] are selected
correctly.
After checking the print setting information, press the
right soft key to select the soft menu [Exit] to go back
to [Print Order Form]. =
(Press the right soft key to select the soft menu [Exit],
which will return you to the edit screen.
y
=.
3
=
=
<
O
=
©
—
=
D
=
=
o
o
D
wn
ow
D
©
C
©.
=
o
Q
=
=
D
m
o
D
=.
O
D
wn
119
120
Canceling the printer selection information
To cancel all the printer selection information saved on the memory card.
1 Displaying the edit screen
"Install the memory card on which the printer selection
information is saved.
'2:Turn on the power supply and turn the mode dial to
select review mode (E).
Pictures saved on the memory card will be displayed
on the edit screen.
2 Canceling the printer selection
‘Press the menu button to display [Edit] menu screen.
‘2:Press the right arrow on the four-way controller to
display [Print Order Form).
13:Press the down arrow on the four-way controller twice
to display [Erase Order] in highlighted text.
'4: Press the left soft key to choose the soft menu [Erase].
The screen for confirming cancellation of the printer
selection screen will be displayed.
5.Press the middle soft key to select the soft menu
[Cancel] in order to cancel the printer selection
Information.
‘6\Press the right soft right key to select the soft menu
[Exit] in order to go back to the edit screen.
Printing The Pictures You Have Taken
Printing using a JetSend compatible printer
How to print using a JetSend compatible printer with the memory card in this camera will now be
explained. |
AI
SN, Reference | |
e Printers other than JetSend compatible printers cannot be used for printing in the following
procedure. .
e In this manual, we will explain the procedure for printing, using Photo Smart P1000/P1 100 by
Hewlett Packard as an example. The actual procedure may differ depending on what printer is
used. Please refer to the user's manual attached to the printer, for operation.
e Please be careful to remember that a lot of the battery power will be used up when printing. It is
recommended that you use an AC adapter (available separately). However, when connecting
an AC adapter, please make sure that you turn off the power supply to this camera.
1 Preparation for printing
Turn on the power supply of the printer, and insert
paper to be printed on.
o
© Reference
Please refer to the user's manual attached to the printer
using for operation.
install the memory card on which pictures to be printed
are saved, in this camera.
Turn on the power supply and set the mode dial to the .
review mode [Edit Icon].
Pictures saved on the memory card will be displayed
on the screen:
2 Selecting pictures
y
=.
=
=r
=
eo .
O
=
O
—
=
@
=
—_
©
O
D
tn
wn
D
m
С
©.
=
o
O
„+
=
D
=
=
a
=
o
“D
©
(DPress the left and right arrows on the four-way control-
ler to scroll the pictures until the cursor points to the
picture to be printed.
Press the left soft key to select the soft menu [Mark].
The lower right of the selected picture will be clipped
and the soft menu [Unmark] is displayed.
121
3 Repeat the same procedure until all the pictures to be
printed are selected.
Press the left soft key to select the soft menu [Unmark]
to cancel a picture that has been selected.
К)
SG ET
* When selecting pictures, please sort the pictures by
the same number of pictures, print on index, and
standard print out.
+ If the collapsed Timelapse shooting or group shooting
is selected, all the pictures collapsed will be printed. If
you want to select pictures within Timelapse shooting
and group shooting separately. press the right soft key
and select the soft menu [Expand] to expand and
select the pictures.
3 Displaying the communication menu
.1-Press the menu button to display [Edit] menu.
2.Press the right arrow on the four-way controller twice to
display [Transmit] menu.
'3:Press the down arrow on the four-way controller, and
[Camera-Printer] will be displayed in highlighted text.
2
SN Reference
If you press the transmit button on the camera, only the
picture where the cursor is placed on the edit screen
can be printed.
Transmit button
122
Printing The Pictures You Have Taken
4 Starting printing
OpPlace the infrared data transmitter on this camera
facing towards the infrared (IR) port of the printer.
other.
Place the transmitter of this camera and the
receiver of the printer close together and facing
each other.
Press the left soft key to select the soft menu [Send].
The message [Connecting...] is displayed on the LCD
monitor of the camera.
@Press the [Print] button on the printer.
@ Set up a type of paper or size according to the
message displayed on the printer's LCD.
Please refer to the user's manual attached to the printer
using for operation.
6) On determining the printer's configurations, orient the
camera's IR data transmitter again to the printer's IR
port and press [OK/YES] button.
[Printing] message will be displayed, followed by
starting with the printing.
0
=
=
=
=
o
O
-
O
—
=
(D
=
TV
pui
o
oO
Lo
w
wn
D
о
с
©.
=
<
Q
—
=
D
-
OJ
(D
=.
e
D
©
123
Viewing And Processing The Pictures You Have Taken On A PC
By using a USB cable, this camera and a PC can be connected and pictures you have taken can be
edited/printed on the PC.
Before connecting the camera and a PC
A PC which can be connected using the USB cable needs to satisfy the following requirements.
Please check before use.
* Product requirements
* Required Windows computer with windows98 or 2000 preinstalled having standard USB port or
Macintosh computer with Mac OS 8.6 or later installed.
x Important»
* Cannot be used with Windows 95.
* When using Windows 98, please install the USB driver. Please refer to the attached user's manual
for the USB Driver Installation Guide and Software FI-S-SW 1 for installation. The dedicated USB
cable (EI-I-USB1) is recommended for connecting.
124
Viewing and Processing The Pictures You Have Taken On A PC
Setting the PC connect mode
When connecting this camera to a PC using a USB cable, set the PC connect mode so that the PC can
recognize the camera as one of the disc drives of the PC. |
1 To display the capture mode screen
DTurn on the power supply and turn the mode dial to the
capture mode (1).
2 To display [PC Connect Mode] setting screen
(DPress the menu button to display the [Capture Settings]
menu.
OPress the left arrow on the four-way controller three
times to display the [Preferences] menu.
Press the down arrow on the four-way controller three
times to display the [PC Connect Mode] in highlighted
text.
@ Press the left soft key to select the soft menu [Edit]. The
[PC Connect Mode] setting screen is displayed.
3 Setting the PC connect mode
(DPress the up and down arrows on the four-way
controller to display [USB Disk Drive] or [Digita Device]
in highlighted text.
If you press the left soft key to select the soft menu
[Select], PC connection mode is set to [USB Disk
Drive] and [Preferences] menu screen will be resumed.
(Press the right soft key to select the soft menu [Exit],
and return to the [Capture Settings] screen.
SN Reference
PC connection mode [Digita Device] is not available at
present.
y
=.
5
=
3
Q
O
Q
=
D
x
T
=
©
o
D
CA
о
D
о
C
O,
>
©
O
—
>
D
<
o
©
<.
o
O
A
125
Connecting with a PC
How to connect the camera to a PC will now be described.
1 Connect a USB cable to the PC
(Turn on the power to the PC.
2 Connect a USB cable to the camera
LInstall the memory card, which has pictures to be
edited on the PC in the camera.
‘ZiOpen the memory card cover of the camera and
connect a USB connection cable to the USB connector
'3-Turn on the power supply and set the mode dial to PC
mode [PC |.
This camera is recognized by a PC to be one of the disk
drives.
>
MT
If the camera is not recognized by a PC as one of the
disk drives, make sure whether the PC connection
mode is set to [USB Disk Drive] (RE p.125).
126
Transmitting/Receiving Pictures To/From Other Cameras Having Digita installed
Transmitting Receiving Pictures To/From Other Cameras Having Digita Installed
It is possible to transmit/receive pictures to/from other cameras having Digita installed.
a N
NN Reference
e |t is possible to transmit/receive pictures to/from another El-200 cameras or other infrared data
transmitter compatible cameras having Digita installed. | |
e Please be careful to remember that a lot of the battery power will be used up when transmitting/
receiving. lt is recommended that you use an AC adapter (available separately) when transmit-
ting/receiving. However, when connecting an AC adapter, please make sure that you turn off the
power supply to this camera.
To transmit pictures
To transmit pictures saved on the memory card to another camera having Digita installed.
1 To prepare for transmission
install the memory card on which pictures to be
transmitted are saved.
@ Turn on the power supply to set the mode dial to the
review mode (E).
The pictures saved on the memory card are displayed
on the edit screen.
2 To select pictures
(DPress the left and right arrows on the four-way control-
ler to scroll the pictures until the cursor points to the
picture to be sent.
v
=.
3
=
=
o
O
—
O
—
x
D
—
U
=
o
o
Dv
w
wn
D
wn
<
©.
=
o
O
—
=
MD
=
О
D
=.
©
MD
tn
127
128
'2:Press the left soft key to select the soft menu [Mark].
The lower right of the selected picture is clipped and
the soft menu [Unmark] is displayed.
3Repeat the same procedure and select all the pictures
to be transmitted.
To cancel a picture once it has been chosen, press the
left soft key to select the soft menu [Unmark].
NY Reference
If collapsed Timelapse shooting or group shooting is
selected, all the pictures collapsed will be transmitted.
If you want to select pictures within Timelapse shooting
or group shooting separately, press the right soft key
and select the soft menu [Expand] to expand the
pictures and individually select the pictures you want.
3 To display the [Transmit] menu
1 Press the menu button and the [Edit] menu is dis-
played.
'2:Press the right arrow on the four-way controller twice to
display the [Transmit] menu and [Camera-Camera] is
displayed in highlighted text.
4 To start transmission
-1-Place the infrared data transmitter on the transmitter
side facing towards the infrared data transmitter on the
receiver side.
The infrared data transmitter
Place two cameras facing each other.
Put the cameras cioser together and allow
the infrared data transmitters on each
camera face each other.
Transmitting/Receiving Pictures To/From Other Cameras Having Digita Installed
Press the soft left key to select the soft menu [Send].
The message for preparation confirmation on the
receiver side is displayed.
(Make sure that the receiver side is in the receiver
mode, then press the left soft key to select the soft
menu [Continue].
The [Receiving camera ready?] message is displayed
on LCD monitor, and the selected pictures are transmit-
ted.
*Important* a
If corrupt data is found in the pictures being transmit-
ted, the transmission is canceled at that point in time.
The remaining pictures will not be transmitted.
To receive pictures
To receive pictures transmitted from other Digita equipped cameras.
Please make sure that the memory card has enough capacity left to save pictures that are
going to be transmitted. If there is not enough capacity left on the memory card, it is not
possible to receive pictures.
1 To prepare to receive pictures
Olinstall a memory card which has enough capacity left
to save the pictures that are to be received.
@ Turn on the power supply and set the mode dial to the
review mode (@3). |
The pictures saved on the memory card are displayed
on the edit screen.
The received pictures are saved after the last picture
saved in the memory card, in shooting date order.
seoneg 1aulo Buisn sesser0o1d 18U10 40 BUHUL A
129
2 To start receiving
(Press the menu button and the [Edit] menu is dis-
played.
2 Press the left arrow on the four-way controller twice and
the [Transmit] menu is displayed. [Camera-Camera] is
then displayed in highlighted text.
‘3:Place the infrared data transmitter on the receiver side
facing towards the infrared data transmitter on the
transmitter side.
The infrared data transmitter
Place two cameras facing each other.
Put the cameras closer and allow the
infrared data transmitters on each camera
to face each other.
Make sure that the transmitter side is in the transmis-
sion waiting mode, then press the middle soft key to
select the soft menu [Receive].
The [Waiting for connection...] message is displayed
on the LCD monitor.
5 Press the left soft key on the transmitter side to select
the soft menu [Continue], and then the pictures will be
received.
130
Running A Script
Running A Script
Running a script saved in the memory card.
o
SN Reference
Under the Digita operating environment, a script program can be made based on Digita Script
language. It is possible to make a series of operations automatic and expand the functions by
running the script program saved in the memory card on the camera.
1 Displaying the script menus
(install the memory card holding the script program.
@Turn on the power supply and select a mode for
operating the program by turning the mode dial.
(If the menu button is pressed, the menu screen will be
displayed.
Press the right arrow on the four-way controller to
display the script menu.
2 Running the script
(Press the up and down arrows on the four-way
controller to display the script you wish to run in
highlighted text.
(@ Press the left soft key to select the soft menu [Start].
The selected script will be run.
o
NEE IE
To cancel running of the script, press the middle soft
key to select the soft menu [Stop Script].
0
=.
=
=
=
o
O
=
Q
=
D
=
y
x
O
o
D
wn
о
(D
wn
<
©.
=
©
Q
> .
D
=
о
D
=.
©
D
En
131
132
Appendix
Page
Error/Alert Message Table ..............acsereiaroruenivenarereron en rorrenenecccnenrnaraane eee 134
Specifications Table ………….….…ismecmemennennnnçnnnnannnnnnnennnnnnenn*n 136
%
133
Error/Alert Message Table
When the error message table is displayed on the LCD monitor or in Live view while using the
camera, the following causes might be given. Please follow the fault finding recommendations.
Group names beginning with BR or TL
are reserved. Would you like to enter
a new group name?
You are trying to register a group name beginning with BR or TL
when creating a new group. Please select the soft menu [Create
New] and register a group name beginning with first letters other
than BR and TL.
Memory Card Full
There is not enough memory to save the number of images
designated in the timelapse mode. Please replace with a new
memory card or delete unwanted pictures.
No card in camera
The camera does not have a memory card installed. Instail a
memory card in the camera.
No Memory Card
The camera does not have a memory card installed. Install a
memory card in the camera.
No images in camera.
There are no images that can be displayed on the edit screen
saved in the memory card.
No images matched search criteria.
A search was executed in review mode. but no Images matching
the designated date or category could be found. Please select
the soft menu [Find] and designate searching items again.
Unable to receive all of the images.
When sending and receiving images between two cameras,
Images can not be received because one of the cameras was not
facing the right way. Set the infrared data transmitters of both
cameras to face each other and try sending and receiving again.
Unable to send all of the images.
While sending and receiving images between two cameras,
images can not be sent because one of the cameras is facing the
wrong way Set the infrared data transmitter of both cameras to
face each other and try sending and receiving images again.
Too Much Light.
You are trying to take a picture in conditions that are extremely
bright without using the flash. Please set the automatic flash.
Low Light.
You are trying to take a picture in conditions that are too dark
without using the flash. Please set the automatic flash mode or
one of the flash modes.
134
Error/Alert Message Table
Card requires formatting. Formatting
will delete everything on the memory
card.
The memory card installed is formatted for use with a personal
computer. It is necessary to format the memory card to be used
in the camera. If the soft menu [Format] is selected, it will delete
date in the memory card and perform formatting.
Camera could not display this image.
The data, which was edited using image editing software of a
personal computer, is saved in the memory card. Data edited on
a personal computer can not be displayed in the presentation
mode.
This group name already exists. Do
you wish to enter a new group name or
continue with the current group name?
When you create a new group, you are trying to register a name
which already exists. Select the soft menu [Create New] to
register a group with a different name.
No Thumbnail.
In the memory card there is data saved which was edited using
image editing software a personal computer. Data edited on a
personal computer can not be displayed in the review mode.
The receiving camera does not have
enough memory to receive images.
There is not enough memory in the receiving camera to receive
the number of images when sending and receiving images
between two cameras. Please delete unwanted pictures or
replace with a new memory card.
Camera did not establish connection.
Be sure IR ports are correctly aligned
and try again.
While sending and receiving images between two cameras,
images could not be sent and received because one of camera
was facing the wrong way. Set the infrared data transmitter of
both cameras to face each other and try sending and receiving
images again.
Transfer interrupted. Some images
were not sent.
While sending images to print with a printer, the images could not
be sent correctly because the camera became misaligned with
respect to the printer. Set the infrared data transmitter of the
camera to face the printer and try sending images again.
Battery depleted.
There is only a little battery power remaining, please replace with
new batteries.
Battery Low.
There is no battery power remaining, please replace with new
batteries.
135
>
S
o
®
=
©.
>
Specifications Table
e Type Compact-type digital still camera with built-in zoom lens. autofocus. auto
exposure and auto flash.
@Sensor 2.11 megapixel (total pixels), 1/2.7 inch, interline transfer. interlace scan,
CCD with a primary color filter
@Color Depth 10 bits x 3 colors.
eRecording Pixels 1600 x 1200 pixels (Full). 800 x 600 pixels (1/4).
@Sensitivity Auto. fixed (equivalent to 1ISO100. 200).
@File Format Exif 2.1(JPEG), TIFF(uncompressed), DPOF.
@ Quality Level "Good", "Better", "Best" and uncompressed TIFF,
® Storage Media CompactFlash™ (CF™) card Type | and Type Il. not compatible with
Microdrive.
elmage Storage Capacity Exposure capacity when using 8MB CF card.
Recording Pixels Good Better Best TIFF
Full approx. 27 14 7 1
1/4 approx. 82 50 28 5
@Lens Pentax power zoom 5.2mm-16.5mm (Equivalent to 34mm-108mm in
35mm format) F/2.4-F/4.0. 9 elements in 8 groups (2 aspherical
elements).
@Focusing System
Type TTL contrast detection autofocus system.
Manual focus (From 0.1m (0.33ft) to infinity) /infinity-landscape mode
available.
Autofocusing Range Normal: 0.5m (1.64ft) to infinity.
Macro: 0.1m (0.33ft) to 0.6m (1.97f1).
@Exposure Control
Exposure Range 11: Auto-exposure. Auto 1SO speed, Auto or Daylight-Sync flash mode
Wide: EV8.5 (ISO 200 equivalency) - EV16.5 (ISO 100 equivalency)
Tele: EV11 (ISO 200 equivalency) - EV18 (ISO 100 equivalency)
2' Auto-exposure. Auto ISO speed, Slow-Shutter-Speed Mode or Slow-
Speed-Flash Sync Mode
Wide: EV3 (ISO 200 equivalency) - EV16.5 (ISO 100 equivalency)
Tele: EV3 (ISO 200 equivalency) - EV18 (ISO 100 equivalency)
Metering System TTL metering. Choice of Average metering, Center-weighted metering and
Spot metering.
Exposure Mode Programmed AE{Auto), Picture Modes (Portrait, Landscape. Action),
Aperture-Priority AE and Shutter-Priority AE.
Exposure Compensation
+2 EV (1/2 steps).
@Shutter Programmed AE electronic lens shutter with CCD electronic shutter
Shutter speeds: approx. 1/1000 sec. to 4 sec.
@Drive Mode One shot, Continuous, Timelapse, Self-timer and Remote control.
136
Specifications Table
eFlash
Flash effective range
Flash Recycling Time
Built-in auto zoom flash. Automatic discharge under low lighting
conditions in auto modes. Flash-on and flash-off modes. “Red-eye”
reduction function employs a single discharge.
Slow-shutter sync available.
0.3m (0.98ft.) - 5.4m (18ft.) at 5.2mm
0.3m (0.98ft.) — 3.7m (121t.) at 16.5mm
approx. 5 sec. with batteries, 3 sec. with AC adapter
O White Balance
Auto, Daylight, Tungsten Light and Fluorescent Light.
@ Color Modes
Color, Black & White and Sepia.
@Digital Zoom Shooting 1.2X/1.5X/2X, Playback 2X.
®Optical Viewfinder Actual-image zoom viewfinder with diopter adjustment from -3m! to +1m”'.
®LCD Monitor 2 inch, low temperature poly-silicon TFT color LCD with 130,338 pixels.
Adjustable brightness control.
@LCD Panel Battery level, flash modes, exposure counter, self-timer, remote control,
Macro mode and Infinity-landscape mode.
@Sound Recording
Sound recording and playback possible. 45 sec of recording per image.
@Presentation and Review Mode
Images can also be played back, edited, and deleted.
@Auto Image Rotation
Automatic image rotation on TVs, computers and cameras.
elnterfaces
AV output terminal (NTSC/PAL), USB terminal, Ir'DA1.1 with JetSend and
Digital™ protocols and DC input terminal.
@Power sources
4 AA lithium, Ni-MH or aikaline batteries or AC adapter (optional).
@Dimensions
127.5 (W) x 71.5 (Н) х 56.5 (О) тт (5.0 х 2.8 х 2.2 inch)
(Projecting operational parts not included).
®Weight
300 g (10.6 oz.) without batteries and CF card.
137
>
©
o
@
3
©.
><
WARRANTY POLICY
All Pentax cameras purchased through authorized bona fide photographic distribution channels are guaranteed
against defects of material or workmanship for a period of twelve months from date of purchase. Service will be
rendered, and defective parts will be replaced without cost to you within that period, provided the equipment
does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical
corrosion, operation contrary to operating instructions, or modification by an unauthorized repair shop. The
manufacturer or its authorized representatives shall not be liable for any repair or alterations except those made
with its written consent and shall not be liable for damages from delay or loss of use or from other indirect or
consequential damages of any kind, whether caused by defective material or workmanship or otherwise; and it is
expressly agreed that the liability of the manufacturer or its representatives under all guarantees or warranties,
whether expressed or implied, is strictly limited to the replacement of parts as herein before provided. No
refunds will be made on repairs performed by non-authorized Pentax service facilities.
Procedure During 12-month Warranty Period
Any Pentax which proves defective during the 12-month warranty period should be returned to the dealer from
whom you purchased the equipment or to the manufacturer. If there is no representative of the manufacturer in
your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a
considerable length of time before the equipment can be returned to you owing to the complicated customs
procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced free of
charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered
by warranty, regular charges of the manufacturer or of its representatives will apply. Shipping charges are to be
borne by the owner. If your Pentax was purchased outside of the country where you wish to have it serviced
during the warranty period, regular handling and servicing fees may be charged by the manufacturer's
representatives in that country. Notwithstanding this, your Pentax returned to the manufacturer will be serviced
free of charge according to this procedure and warranty policy.
In any case, however, shipping charges and customs clearance fees are to be borne by the sender. To prove the
date of your purchase when required, please keep the receipts or bills covering the purchase of your equipment
for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the
manufacturer's authorized representatives or their approved repair shops, unless you are sending it directly to
the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service
charge, instruct the service station to proceed with the servicing.
The local warranty policies available from Pentax distributors in some countries can supersede this warranty
policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of
purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the
warranty policy.
138
For customers in the USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. :
Changes or modifications not approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This equipment has been tested and found comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will occur in a particular installa-
tion. If this equipment does not cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
¢ Reorient or relocate the receiving antenna.
e Increase the separation between the equipment and receiver.
e Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
e Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus meets all requirements of the Canadian Interference -
Causing Equipment Regulations.
Pour les utilisateurs an Canada
Cet appareil numérique de la classe B respecte toutes les exigences du Reglement sur le
matériel brouilleur du Canada.
Asahi Optical Co., Ltd. 11-1, Nagatacho 1-chome, Chiyoda-ku, Tokyo 100, JAPAN
Pentax Europe n.v. Weiveldlaan 3-5, 1930 Zaventem, BELGIUM
Pentax GmbH. Julius-Vosseler-Strasse, 104, D-22527 Hamburg, GERMANY
Pentax U.K. Limited. Pentax House, Heron Drive, Langley, Slough SL3 8PN. U.K.
Pentax France S.A. 7.1. Argenteuil, 12/14, rue Jean Poulmarch, 95106 Argenteuil, FRANCE
Pentax Benelux B.V. (for Netherlands) Spinveld 25, 4815 HR Breda, NETHERLANDS
(for Belgium & Luxemburg) Weiveldlaan 3-5, 1930 Zaventem, BELGIUM
Pentax (Schweiz) AG Industriestrasse 2, 8305 Dietlikon, SWITZERLAND
Pentax Scandinavia AB Falhagsleden 57, 75127 Uppsala, SWEDEN
Pentax Corporation 35 Inverness Drive East, Englewood, Colorado 80112, USA.
Pentax Canada Inc. 3131 Universal Drive, Mississauga, Ontario L4X 2E5, CANADA
http://www.digital.pentax.co.ip
Copyright 6 Asahi Optical Co., Ltd. 2000
01-0007 Printed in Japan
This operating manual is printed on recycled paper.
57115
">