Fujifilm GFX 50r Owner’s Manual

Owner’s Manual BL00004964-203 EN Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents before using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information The latest versions of the manuals are available from: http://fujifilm-dsc.com/en/manual/ The site can be accessed not only from your computer but also from smartphones and tablets. It also contains information on the software license. For information on firmware updates, visit: http://www.fujifilm.com/support/digital_cameras/software/ ii P Chapter Index Menu List 1 Before You Begin iv 1 2 First Steps 25 3 Basic Photography and Playback 43 4 Movie Recording and Playback 49 5 Taking Photographs 55 6 The Shooting Menus 87 7 Playback and the Playback Menu 129 8 The Setup Menus 155 9 Shortcuts 191 10 Peripherals and Optional Accessories 203 11 Connections 217 12 Technical Notes 231 iii Menu List Camera menu options are listed below. Menu List Shooting Menus Adjust settings when shooting photos or movies. N See page 87 for details. H IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING SIMULATION 1⁄3 FILM GRAIN EFFECT COLOR CHROME EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE SHADOW TONE COLOR 2⁄3 SHARPNESS NOISE REDUCTION LONG EXPOSURE NR LENS MODULATION OPTIMIZER COLOR SPACE PIXEL MAPPING 3⁄3 SELECT CUSTOM SETTING EDIT/SAVE CUSTOM SETTING iv P G AF/MF SETTING P 88 FOCUS AREA 89 AF MODE 89 STORE AF MODE BY ORIENTATION 90 RAPID AF 1⁄3 91 AF POINT DISPLAYyz 91 NUMBER OF FOCUS POINTS 92 PRE-AF 93 AF ILLUMINATOR 96 FACE/EYE DETECTION SETTING 96 AF+MF 96 MF ASSIST 96 FOCUS CHECK 2⁄3 97 INTERLOCK SPOT AE & FOCUS AREA 97 INSTANT AF SETTING 97 DEPTH-OF-FIELD SCALE 97 RELEASE/FOCUS PRIORITY 98 3⁄3 TOUCH SCREEN MODE 98 99 100 101 102 102 102 103 103 103 104 105 106 106 107 107 108 108 109 Menu List P B MOVIE SETTING 111 112 112 114 114 115 116 117 118 118 119 121 123 123 MOVIE MODE MOVIE AF MODE HDMI OUTPUT INFO DISPLAY HDMI REC CONTROL MIC LEVEL ADJUSTMENT MIC/REMOTE RELEASE P 127 127 127 128 128 128 P 124 124 125 125 126 126 v Menu List A SHOOTING SETTING SELF-TIMER SAVE SELF-TIMER SETTING INTERVAL TIMER SHOOTING BKT SETTING 1⁄2 AE FILM SIMULATION BKT FOCUS BKT PHOTOMETRY SHUTTER TYPE FLICKER REDUCTION IS MODE 2⁄2 ISO MOUNT ADAPTER SETTING 35mm FORMAT MODE WIRELESS COMMUNICATION F FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING The Playback Menu Adjust playback settings. N See page 135 for details. Menu List C PLAY BACK MENU SWITCH SLOT RAW CONVERSION ERASE SIMULTANEOUS DELETE 1⁄3 (RAW SLOT1/JPG SLOT2) CROP RESIZE PROTECT IMAGE ROTATE vi P C PLAY BACK MENU 135 RED EYE REMOVAL 136 VOICE MEMO SETTING 138 COPY TRANSFER ORDER 140 2⁄3 IMAGE WIRELESS COMMUNICATION PHOTOBOOK ASSIST 140 PRINT ORDER (DPOF) 141 instax PRINTER PRINT 142 143 3⁄3 DISP ASPECT P 144 145 146 147 148 149 151 152 153 Menu List Setup Menus Adjust basic camera settings. N See page 155 for details. P D SCREEN SETTING P 156 EVF BRIGHTNESS 162 157 EVF COLOR 162 157 EVF COLOR ADJUSTMENT 162 163 158 1⁄3 LCD BRIGHTNESS LCD COLOR 163 158 LCD COLOR ADJUSTMENT 163 159 IMAGE DISP. 164 159 AUTOROTATE DISPLAYS 164 159 PREVIEW EXP./WB IN MANUAL MODE 165 P NATURAL LIVE VIEW 165 160 FRAMING GUIDELINE 166 160 PB 167 160 2⁄3 AUTOROTATE FOCUS SCALE UNITS 167 161 DISP. CUSTOM SETTING 168 161 LARGE INDICATORS MODE(EVF) 169 161 LARGE INDICATORS MODE(LCD) 170 3⁄3 LARGE INDICATORS DISP. SETTING 171 vii Menu List D USER SETTING FORMAT DATE/TIME TIME DIFFERENCE Qa MY MENU SETTING SENSOR CLEANING BATTERY AGE RESET D SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME Menu List Menu List D BUTTON/DIAL SETTING FOCUS LEVER SETTING EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING DIAL SETTING 1⁄2 COMMAND SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS SHOOT WITHOUT CARD FOCUS RING MODE 2⁄2 AE/AF-LOCK TOUCH SCREEN SETTING LOCK D POWER MANAGEMENT AUTO POWER OFF SHOOTING STAND BY MODE AUTO POWER SAVE viii P D SAVE DATA SETTING 172 173 174 176 177 177 177 178 178 178 179 179 P 180 180 181 P FRAME NO. 182 SAVE ORG IMAGE 183 EDIT FILE NAME 183 CARD SLOT SETTING (STILL IMAGE) 183 SWITCH SLOT (SEQUENTIAL) 183 MOVIE FILE DESTINATION 184 SELECT FOLDER 184 COPYRIGHT INFO 184 P D CONNECTION SETTING Bluetooth SETTINGS 185 NETWORK SETTING 186 instax PRINTER CONNECTION SETTING 187 PC CONNECTION MODE 187 GENERAL SETTINGS 189 INFORMATION 189 RESET WIRELESS SETTING 189 P Table of Contents Introduction ....................................................................................................ii For the Latest Information ................................................................................... ii Menu List .........................................................................................................iv Shooting Menus ........................................................................................................iv The Playback Menu .................................................................................................vi Setup Menus ..............................................................................................................vii Supplied Accessories ............................................................................... xix About This Manual ......................................................................................xx Symbols and Conventions .................................................................................xx Terminology ................................................................................................................xx 1 Before You Begin 1 Parts of the Camera ......................................................................................2 The Serial Number Plate ........................................................................................5 The Focus Stick (Focus Lever).............................................................................5 The Shutter Speed Dial ..........................................................................................5 The Drive Button ........................................................................................................6 The Exposure Compensation Dial ...................................................................6 The Command Dials ................................................................................................7 The Indicator Lamp ..................................................................................................8 The LCD Monitor ........................................................................................................9 Camera Displays.......................................................................................... 10 The Electronic Viewfinder .................................................................................. 10 The LCD Monitor ..................................................................................................... 12 Display Rotation ...................................................................................................... 13 Choosing a Display Mode ................................................................................. 14 Adjusting Display Brightness........................................................................... 15 Focusing the Viewfinder..................................................................................... 15 The DISP/BACK Button ........................................................................................ 16 The Dual Display...................................................................................................... 17 Customizing the Standard Display .............................................................. 18 Using the Menus......................................................................................... 20 ix Touch Screen Mode ................................................................................... 21 Shooting Touch Controls ................................................................................... 21 Playback Touch Controls .................................................................................... 24 2 First Steps 25 3 Basic Photography and Playback 43 4 Movie Recording and Playback 49 5 Taking Photographs 55 Attaching the Strap ................................................................................... 26 Attaching a Lens ......................................................................................... 28 Charging the Battery ................................................................................. 29 Inserting the Battery ................................................................................. 32 Inserting Memory Cards .......................................................................... 34 Using Two Cards ...................................................................................................... 35 Compatible Memory Cards .............................................................................. 36 Turning the Camera On and Off............................................................ 37 Checking the Battery Level ..................................................................... 38 Basic Setup.................................................................................................... 39 Choosing a Different Language .................................................................... 41 Changing the Time and Date.......................................................................... 41 Taking Photographs (Mode P) ............................................................... 44 Viewing Pictures ......................................................................................... 47 Deleting Pictures ........................................................................................ 48 Recording Movies....................................................................................... 50 Adjusting Movie Settings .................................................................................. 52 Viewing Movies ........................................................................................... 53 P, S, A, and M Modes .................................................................................. 56 Mode P: Program AE ............................................................................................. 56 Mode S: Shutter-Priority AE .............................................................................. 58 Mode A: Aperture-Priority AE.......................................................................... 61 Mode M: Manual Exposure ............................................................................... 62 x Table of Contents Autofocus ...................................................................................................... 64 Focus Mode................................................................................................................ 65 Autofocus Options (AF Mode) ........................................................................ 67 Focus-Point Selection .......................................................................................... 69 Manual Focus ............................................................................................... 72 Checking Focus........................................................................................................ 74 Sensitivity ...................................................................................................... 76 AUTO............................................................................................................................... 77 Metering ........................................................................................................ 78 Exposure Compensation ......................................................................... 79 C (Custom) .................................................................................................................. 80 Focus/Exposure Lock ................................................................................ 81 The AF-L and AE-L Buttons ............................................................................... 82 Bracketing ..................................................................................................... 83 O AE BKT .................................................................................................................... 83 W ISO BKT.................................................................................................................. 83 X FILM SIMULATION BKT ................................................................................ 83 V WHITE BALANCE BKT.................................................................................... 84 Y DYNAMIC RANGE BKT ................................................................................. 84 Z FOCUS BKT ......................................................................................................... 84 Continuous Shooting (Burst Mode) ..................................................... 85 Multiple Exposures .................................................................................... 86 6 The Shooting Menus 87 IMAGE QUALITY SETTING ........................................................................ 88 IMAGE SIZE.................................................................................................................. 88 IMAGE QUALITY ....................................................................................................... 89 RAW RECORDING .................................................................................................... 89 FILM SIMULATION................................................................................................... 90 GRAIN EFFECT ........................................................................................................... 91 COLOR CHROME EFFECT ................................................................................... 91 DYNAMIC RANGE .................................................................................................... 92 WHITE BALANCE...................................................................................................... 93 xi HIGHLIGHT TONE .................................................................................................... 96 SHADOW TONE ........................................................................................................ 96 COLOR............................................................................................................................ 96 SHARPNESS................................................................................................................. 96 NOISE REDUCTION................................................................................................. 97 LONG EXPOSURE NR ............................................................................................. 97 LENS MODULATION OPTIMIZER .................................................................... 97 COLOR SPACE ............................................................................................................ 97 PIXEL MAPPING ........................................................................................................ 98 SELECT CUSTOM SETTING ................................................................................ 98 EDIT/SAVE CUSTOM SETTING.......................................................................... 99 AF/MF SETTING .........................................................................................100 FOCUS AREA ........................................................................................................... 100 AF MODE................................................................................................................... 101 STORE AF MODE BY ORIENTATION............................................................ 102 RAPID AF ................................................................................................................... 102 AF POINT DISPLAYyz ................................................................................. 102 NUMBER OF FOCUS POINTS ......................................................................... 103 PRE-AF......................................................................................................................... 103 AF ILLUMINATOR .................................................................................................. 103 FACE/EYE DETECTION SETTING .................................................................. 104 AF+MF ........................................................................................................................ 105 MF ASSIST ................................................................................................................. 106 FOCUS CHECK........................................................................................................ 106 INTERLOCK SPOT AE & FOCUS AREA ....................................................... 107 INSTANT AF SETTING ......................................................................................... 107 DEPTH-OF-FIELD SCALE .................................................................................. 108 RELEASE/FOCUS PRIORITY ............................................................................. 108 TOUCH SCREEN MODE..................................................................................... 109 SHOOTING SETTING ................................................................................111 SELF-TIMER ............................................................................................................... 111 SAVE SELF-TIMER SETTING ............................................................................. 112 INTERVAL TIMER SHOOTING.......................................................................... 112 1 Introduction xii Table of Contents 7 Playback and the Playback Menu 129 The Playback Display...............................................................................130 The DISP/BACK Button ..................................................................................... 131 Viewing Pictures .......................................................................................133 Playback Zoom...................................................................................................... 134 Multi-Frame Playback ........................................................................................ 134 xiii 1 Introduction AE BKT SETTING .................................................................................................... 114 FILM SIMULATION BKT ...................................................................................... 114 FOCUS BKT ............................................................................................................... 115 PHOTOMETRY ........................................................................................................ 116 SHUTTER TYPE ....................................................................................................... 117 FLICKER REDUCTION ......................................................................................... 118 IS MODE ..................................................................................................................... 118 ISO ................................................................................................................................. 119 MOUNT ADAPTER SETTING ........................................................................... 121 35mm FORMAT MODE ..................................................................................... 123 WIRELESS COMMUNICATION ....................................................................... 123 FLASH SETTING .........................................................................................124 FLASH FUNCTION SETTING ........................................................................... 124 RED EYE REMOVAL .............................................................................................. 124 TTL-LOCK MODE ................................................................................................... 125 LED LIGHT SETTING ............................................................................................ 125 MASTER SETTING ................................................................................................. 126 CH SETTING ............................................................................................................. 126 MOVIE SETTING .........................................................................................127 MOVIE MODE.......................................................................................................... 127 MOVIE AF MODE .................................................................................................. 127 HDMI OUTPUT INFO DISPLAY ...................................................................... 127 HDMI REC CONTROL.......................................................................................... 128 MIC LEVEL ADJUSTMENT ................................................................................ 128 MIC/REMOTE RELEASE ...................................................................................... 128 The Playback Menu..................................................................................135 SWITCH SLOT .......................................................................................................... 135 RAW CONVERSION .............................................................................................. 136 ERASE .......................................................................................................................... 138 SIMULTANEOUS DELETE(RAW SLOT1/JPG SLOT2) ........................... 140 CROP ............................................................................................................................ 140 RESIZE ......................................................................................................................... 141 PROTECT.................................................................................................................... 142 IMAGE ROTATE ....................................................................................................... 143 RED EYE REMOVAL .............................................................................................. 144 VOICE MEMO SETTING ..................................................................................... 145 COPY ............................................................................................................................ 146 IMAGE TRANSFER ORDER................................................................................ 147 WIRELESS COMMUNICATION ....................................................................... 148 PHOTOBOOK ASSIST .......................................................................................... 149 PRINT ORDER (DPOF)......................................................................................... 151 instax PRINTER PRINT......................................................................................... 152 DISP ASPECT ........................................................................................................... 153 1 Introduction 8 The Setup Menus 155 USER SETTING ............................................................................................156 FORMAT ..................................................................................................................... 156 DATE/TIME................................................................................................................ 157 TIME DIFFERENCE ................................................................................................ 157 Qa ......................................................................................................... 158 MY MENU SETTING ............................................................................................. 158 SENSOR CLEANING ............................................................................................. 159 BATTERY AGE .......................................................................................................... 159 RESET ........................................................................................................................... 159 SOUND SETTING .......................................................................................160 AF BEEP VOL. ........................................................................................................... 160 SELF-TIMER BEEP VOL. ....................................................................................... 160 OPERATION VOL.................................................................................................... 160 xiv Table of Contents xv 1 Introduction SHUTTER VOLUME............................................................................................... 161 SHUTTER SOUND ................................................................................................. 161 PLAYBACK VOLUME ............................................................................................ 161 SCREEN SETTING.......................................................................................162 EVF BRIGHTNESS................................................................................................... 162 EVF COLOR ............................................................................................................... 162 EVF COLOR ADJUSTMENT .............................................................................. 162 LCD BRIGHTNESS.................................................................................................. 163 LCD COLOR .............................................................................................................. 163 LCD COLOR ADJUSTMENT ............................................................................. 163 IMAGE DISP............................................................................................................... 164 AUTOROTATE DISPLAYS ................................................................................... 164 PREVIEW EXP./WB IN MANUAL MODE..................................................... 165 NATURAL LIVE VIEW............................................................................................ 165 FRAMING GUIDELINE......................................................................................... 166 AUTOROTATE PB ................................................................................................... 167 FOCUS SCALE UNITS .......................................................................................... 167 DISP. CUSTOM SETTING.................................................................................... 168 LARGE INDICATORS MODE(EVF) ................................................................. 169 LARGE INDICATORS MODE(LCD) ................................................................ 170 LARGE INDICATORS DISP. SETTING............................................................ 171 BUTTON/DIAL SETTING ..........................................................................172 FOCUS LEVER SETTING ..................................................................................... 172 EDIT/SAVE QUICK MENU ................................................................................. 173 FUNCTION (Fn) SETTING ................................................................................. 174 COMMAND DIAL SETTING ............................................................................. 176 SHUTTER AF ............................................................................................................ 177 SHUTTER AE ............................................................................................................ 177 SHOOT WITHOUT LENS .................................................................................... 177 SHOOT WITHOUT CARD .................................................................................. 178 FOCUS RING ............................................................................................................ 178 AE/AF-LOCK MODE............................................................................................. 178 TOUCH SCREEN SETTING ................................................................................ 179 LOCK ............................................................................................................................ 179 POWER MANAGEMENT ..........................................................................180 AUTO POWER OFF ............................................................................................... 180 SHOOTING STAND BY MODE ........................................................................ 180 AUTO POWER SAVE............................................................................................. 181 SAVE DATA SETTING ................................................................................182 FRAME NO. ............................................................................................................... 182 SAVE ORG IMAGE ................................................................................................. 183 EDIT FILE NAME..................................................................................................... 183 CARD SLOT SETTING (STILL IMAGE).......................................................... 183 SWITCH SLOT (SEQUENTIAL) ......................................................................... 183 MOVIE FILE DESTINATION ............................................................................... 184 SELECT FOLDER .................................................................................................... 184 COPYRIGHT INFO ................................................................................................. 184 CONNECTION SETTING ..........................................................................185 Bluetooth SETTINGS........................................................................................... 185 NETWORK SETTING ............................................................................................ 186 instax PRINTER CONNECTION SETTING ................................................. 187 PC CONNECTION MODE ................................................................................. 187 GENERAL SETTINGS ............................................................................................ 189 INFORMATION........................................................................................................ 189 RESET WIRELESS SETTING ............................................................................... 189 1 Introduction 9 Shortcuts 191 Shortcut Options ......................................................................................192 The Q (Quick Menu) Button ..................................................................193 The Quick Menu Display ................................................................................. 193 Viewing and Changing Settings................................................................. 194 Editing the Quick Menu................................................................................... 195 The Fn (Function) Buttons .....................................................................196 Assigning Roles to the Function Buttons ............................................. 198 MY MENU ....................................................................................................200 MY MENU SETTING ............................................................................................. 200 xvi Table of Contents 10Peripherals and Optional Accessories 203 11Connections 217 HDMI Output..............................................................................................218 Connecting to HDMI Devices ...................................................................... 218 Shooting.................................................................................................................... 219 Playback ..................................................................................................................... 219 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) ............220 Smartphones and Tablets: FUJIFILM Camera Remote .................. 220 Tethered Shooting: FUJIFILM X Acquire/FUJIFILM Tether Shooting Plug-in/FUJIFILM Tether Shooting Plug-in PRO/ Hyper-Utility Software HS-V5..................................................................... 222 Connecting to Computers via USB ....................................................223 Tethered Shooting: FUJIFILM X Acquire/FUJIFILM Tether Shooting Plug-in/FUJIFILM Tether Shooting Plug-in PRO/ Hyper-Utility Software HS-V5..................................................................... 226 Copying Pictures to a Computer ............................................................... 227 Copying RAW Images in Other Formats: FUJIFILM X RAW STUDIO .................................................................................................................... 228 Saving and Loading Camera Settings (FUJIFILM X Acquire)..... 228 instax SHARE Printers ..............................................................................229 Establishing a Connection ............................................................................. 229 Printing Pictures.................................................................................................... 230 xvii 1 Introduction Lenses ...........................................................................................................204 Lens Parts .................................................................................................................. 204 Lens Care................................................................................................................... 205 Removing Lens Caps ......................................................................................... 205 Attaching Lens Hoods ...................................................................................... 205 Aperture ring .......................................................................................................... 206 External Flash Units .................................................................................207 Flash Settings ......................................................................................................... 208 SYNC TERMINAL.................................................................................................... 209 SHOE MOUNT FLASH ........................................................................................ 210 MASTER(OPTICAL) ............................................................................................... 213 Table of Contents 12Technical Notes 1 231 Introduction Accessories from Fujifilm .......................................................................232 Software from Fujifilm ............................................................................234 FUJIFILM Camera Remote .............................................................................. 234 MyFinePix Studio.................................................................................................. 234 RAW FILE CONVERTER EX ................................................................................ 234 FUJIFILM X RAW STUDIO ................................................................................. 235 FUJIFILM X Acquire ............................................................................................. 235 FUJIFILM Tether Shooting Plug-ins for Lightroom .......................... 235 Hyper-Utility Software HS-V5 ....................................................................... 235 For Your Safety ...........................................................................................236 Product Care...............................................................................................245 Cleaning the Image Sensor...................................................................246 Firmware Updates ....................................................................................247 Checking the Firmware Version .................................................................. 247 Troubleshooting .......................................................................................248 Warning Messages and Displays.........................................................257 Memory Card Capacity ...........................................................................260 Specifications .............................................................................................261 xviii Supplied Accessories The following are included with the camera: • NP-T125 rechargeable battery • BC-T125 battery charger • Plug adapter • Body cap • Metal strap clips (× 2) • Clip attaching tool • Protective covers (× 2) • Shoulder strap • Cable protector • Hot shoe cover (comes attached to hot shoe) • Sync terminal cap (comes attached to camera) • Owner’s Manual (this manual) 1 Introduction N • The plug adapter supplied with the camera varies with the country or region of purchase; be sure to use the adapter appropriate to your country or region as described in the enclosed notice. • For information on compatible computer software, see “Software from Fujifilm” (P 234). xix About This Manual This manual contains instructions for your FUJIFILM GFX 50R digital camera. Be sure you have read and understood its contents before proceeding. 1 Introduction Symbols and Conventions The following symbols are used in this manual: O Information that should be read to prevent damage to the product. Additional information that may be helpful when using the N product. P Pages on which related information may be found. Menus and other text in the displays are shown in bold. Illustrations are for explanatory purposes only; drawings may be simplified, while photographs are not necessarily taken with the model of camera described in this manual. Terminology The optional SD, SDHC, and SDXC memory cards the camera uses to store pictures are referred to as “memory cards”. The electronic viewfinder may be referred to as the “EVF” and the LCD monitor as the “LCD”. xx Before You Begin 1 Parts of the Camera 1 Before You Begin A ON/OFF switch ................................................. 37 B Shutter button................................................. 46 C Exposure compensation dial ..................6, 79 D Fn1 button......................................................196 E Dial lock release .................................................5 F Shutter speed dial .................................................. 5, 56, 58, 61, 62 G Hot shoe ...................................................23, 210 H Microphone ..................................................... 51 I AF-assist illuminator ...................................103 J 2 Self-timer lamp .............................................111 Remote release connector cover ........................................................... 51, 60, 128 K Diopter adjustment control ........................ 15 L Strap eyelet....................................................... 26 M Sync terminal ................................................209 N Lens signal contacts O Lens release button ........................................ 28 P Fn2 button......................................................176 Q Drive button........................................................6 R Front command dial .............................. 7, 176 S Microphone/remote release connector (⌀ 2.5 mm)...................................... 51, 60, 128 T Hot shoe cover...............................................210 U Body cap ........................................................... 28 Parts of the Camera 1 Before You Begin V Electronic viewfinder (EVF)...............10, 14, 15 W Eye sensor ......................................................... 14 X VIEW MODE button......................................... 14 Y b (delete) button .......................................... 48 Z Focus mode selector ...................................... 65 a Fn3 button...............................................82, 196 b Rear command dial....................... 7, 133, 176 c Fn4 button...............................................82, 196 d Fn5 button...............................................67, 196 e Q (quick menu) button ...............................193 f HDMI connector cover g Memory card slot cover ................................ 34 h Memory card slot cover latch ..................... 34 i Indicator lamp ............................................8, 31 j Connector cover.....................................31, 223 k Speaker.....................................................53, 161 l Tripod mount m Battery-chamber cover ................................ 32 n Battery-chamber cover latch...................... 32 o LCD monitor................................... 9, 12, 14, 15 Touch screen ..................................21, 109, 179 p DISP (display)/BACK button ...............16, 131 q a (playback) button................................... 47 r MENU/OK button ............................................ 20 s Focus stick (focus lever) ...................5, 69, 172 t HDMI Micro connector (Type D) ..............218 u Memory card slot 1 ........................................ 34 v Memory card slot 2 ........................................ 34 3 1 Before You Begin w Battery chamber ............................................ 32 y USB connector (Type-C) .............................223 x Battery latch .................................................... 33 z 15 V DC-IN connector.................................... 31 The Cable Protector A The cable protector prevents accidental disconnection of the USB cable or AC adapter. Attach the protector as shown and tighten the lock screw. B 4 Connect the cable and pass it A through the protector as shown. B Parts of the Camera The Serial Number Plate Do not remove the serial number plate, which provides the FCC ID, KC mark, serial number, and other important information. 1 The Focus Stick (Focus Lever) Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus. The Shutter Speed Dial Press the dial lock release to release the dial before rotating it to the desired setting. Press the release again to lock the dial in place. 5 Before You Begin Serial number plate The Drive Button Pressing the drive button displays the following drive mode options. 1 Before You Begin Mode STILL IMAGE (single frame) CONTINUOUS (burst mode) AE BKT (exposure bracketing) ISO BKT (sensitivity bracketing) FILM SIMULATION BKT X (film simulation bracketing) WHITE BALANCE BKT V (white balance bracketing) B I O W P Mode DYNAMIC RANGE BKT 44 Y (dynamic range bracketing) 85 83 Z FOCUS BKT (focus bracketing) 83 j MULTIPLE EXPOSURE F MOVIE 83 84 The Exposure Compensation Dial Rotate the dial to choose an exposure compensation amount. 6 P 84 84 86 50 Parts of the Camera The Command Dials Rotate or press the command dials to: Front command dial Rear command dial 1 through menus the desired combination of shutter speed and aperture (program shift) • Adjust aperture 1, 2 4 • Adjust exposure compensation 1 Adjust sensitivity • • View other pictures during playback • Choose Rotate — Press • Highlight menu items • Choose the desired combination of shutter speed and aperture (program shift) • Choose a shutter speed 1 • Adjust settings in the quick menu • Choose the size of the focus frame • Zoom in or out in full frame playback • Zoom in or out in multi-frame playback • Zoom in on the active focus point 3 • Press and hold to choose the3 manual focus mode focus display • Zoom in on the active focus point during playback 1 Can be changed using D BUTTON/DIAL SETTING > COMMAND DIAL SETTING. 2 If the lens is equipped with an aperture ring with a “C” position, the camera command dials can be used to adjust aperture when the aperture ring is rotated to C. 3 Available only if FOCUS CHECK is assigned to a function button. 4 Exposure compensation dial rotated to C. 7 Before You Begin • Select menu tabs or page The Indicator Lamp Camera status is shown by the indicator lamp. 1 Before You Begin Indicator lamp Glows green Blinks green Blinks green and orange Glows orange Blinks orange Blinks red Camera status Focus locked. Focus or slow shutter speed warning. Pictures can be taken. • Camera on: Recording pictures. Additional pictures can be taken. • Camera off: Uploading pictures to a smartphone or tablet. * Recording pictures. No additional pictures can be taken at this time. Flash charging; flash will not fire when picture is taken. Lens or memory error. * Displayed only if pictures are selected for upload. N • Warnings may also appear in the display. • The indicator lamp remains off while your eye is to the viewfinder. 8 Parts of the Camera The LCD Monitor The LCD monitor can be tilted for easier viewing, but be careful not to touch the wires or trap fingers or other objects behind the monitor. Touching the wires could cause camera malfunction. 1 • Focus or focus-area selection (P 21, 22) • Function selection (P 23) • Full-frame playback (P 24) 9 Before You Begin N The LCD monitor also functions as a touch screen that can be used for: Camera Displays This section lists the indicators that may be displayed during shooting. O For illustrative purposes, displays are shown with all indicators lit. The Electronic Viewfinder 1 A B C D EF GHIJKLM N O Before You Begin t s r q p o n P Q R S 01/01/2018 10:00 AM U 5 4 3 2 1 0 -1 -2 -3 -4 -5 V m W l 1.0 gf k ji h 10 T e d c b a Z Y X Camera Displays X Histogram......................................................... 19 Y Battery level ..................................................... 38 Z Sensitivity.......................................................... 76 a Exposure compensation .............................. 79 b Aperture ...............................................57, 61, 62 c Shutter speed......................................57, 58, 62 d TTL lock ........................................ 125, 175, 199 e AE lock ......................................................82, 178 f Metering............................................................ 78 g Shooting mode ............................................... 56 h Focus mode 2 .................................................... 65 i Focus indicator 2.............................................. 66 j Manual focus indicator 2 ....................... 65, 72 k AF lock ......................................................82, 178 l Distance indicator 2 ........................................ 74 m Recording level 2, 3..........................................128 n Exposure indicator .................................. 62, 79 o Virtual horizon ................................................ 19 p Location data download status .....189, 220 q 35mm format mode ...................................123 r Depth-of-field preview .......................... 61, 74 s Focus check .............................................75, 106 t IS mode 2..........................................................118 1 Shows “9999” if there is space for over 9999 frames. 2 Not displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS MODE(EVF). 3 Displayed during movie recording only. 11 1 Before You Begin A Microphone ...................................................128 B Remote release..............................................128 C Flash (TTL) mode .........................................210 D Flash compensation....................................210 E Self-timer indicator......................................111 F Continuous mode .......................................... 85 G Shutter type....................................................117 H AF+MF indicator 2 ........................................105 I Bluetooth ON/OFF .......................................185 J White balance ................................................. 93 K Film simulation ............................................... 90 L Dynamic range ............................................... 92 M Image transfer status .........................185, 220 N Date and time ................................. 39, 41, 157 O Movie mode 3 ..........................................50, 127 P Time remaining 3............................................. 50 Q Card slot options ...................................35, 183 R Number of available frames 1 ...................260 S Image size......................................................... 88 T Image quality .................................................. 89 U Touch screen mode...............................21, 109 V Temperature warning .................................259 W Focus frame .............................................. 69, 81 The LCD Monitor A B C D E FG H s 1 I J K LM 01/01/2018 10:00 AM N Before You Begin r q p O o P Q n l R S T k U m j V e d i h g f 12 cb a Z Y X W Camera Displays X Sensitivity.......................................................... 76 Y Exposure compensation .............................. 79 Z Aperture ...............................................57, 61, 62 a Shutter speed......................................57, 58, 62 b TTL lock ........................................ 125, 175, 199 c AE lock ......................................................82, 178 d Metering............................................................ 78 e Shooting mode ............................................... 56 f Focus mode 2 .................................................... 65 g Focus indicator 2.............................................. 66 h Manual focus indicator 2 ....................... 65, 72 i AF lock ......................................................82, 178 j AF+MF indicator 2 ........................................105 k Shutter type....................................................117 l Recording level 2, 3..........................................128 m Continuous mode .......................................... 85 n Exposure indicator .................................. 62, 79 o Self-timer indicator......................................111 p Microphone ...................................................128 q Remote release..............................................128 r Flash (TTL) mode .........................................210 s Flash compensation....................................210 1 Shows “9999” if there is space for over 9999 frames. 2 Not displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS MODE(LCD). 3 Displayed during movie recording only. 4 Camera functions can also be accessed via touch controls. Display Rotation When ON is selected for D SCREEN SET-UP > AUTOROTATE DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to match camera orientation. 13 1 Before You Begin A IS mode 2..........................................................118 B Focus check .............................................75, 106 C Depth-of-field preview .......................... 61, 74 D Location data download status .....189, 220 E 35mm format mode ...................................123 F Bluetooth ON/OFF .......................................185 G Image transfer status .........................185, 220 H Movie mode 3 ..........................................50, 127 I Time remaining 3............................................. 50 J Card slot options ...................................35, 183 K Number of available frames 1 ...................260 L Image size......................................................... 88 M Image quality .................................................. 89 N Date and time ................................. 39, 41, 157 O Touch screen mode 4 .............................21, 109 P White balance ................................................. 93 Q Film simulation ............................................... 90 R Dynamic range ............................................... 92 S Temperature warning .................................259 T Focus frame .............................................. 69, 81 U Histogram......................................................... 19 V Distance indicator 2 ........................................ 74 W Battery level ..................................................... 38 Choosing a Display Mode Press the VIEW MODE button to cycle through the following display modes. 1 Before You Begin Option E EYE SENSOR EVF ONLY LCD ONLY EVF ONLY + E E EYE SENSOR + LCD IMAGE DISP. Description Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. Viewfinder on, LCD monitor off. LCD monitor on, viewfinder off. Putting your eye to the viewfinder turns the viewfinder on; taking it away turns the viewfinder off. The LCD monitor remains off. Putting your eye to the viewfinder during shooting turns the viewfinder on, but the LCD monitor is used for the display of images once you remove your eye from the viewfinder after shooting. The Eye Sensor • The eye sensor may respond to objects other than your eye or to light shining directly on the sensor. • The eye sensor is disabled while the LCD monitor is tilted. Eye sensor 14 Camera Displays Adjusting Display Brightness The brightness and hue of the viewfinder and LCD monitor can be adjusted using the items in the D SCREEN SET-UP menu. Choose EVF BRIGHTNESS or EVF COLOR to adjust viewfinder brightness or hue, LCD BRIGHTNESS or LCD COLOR to do the same for the LCD monitor. To focus the viewfinder: A Lift the diopter adjustment control. B Rotate the control to adjust viewfinder focus. C Return the control to its original position and lock it in place. O Lift the control before use. Failure to observe this precaution could cause product malfunction. 15 1 Before You Begin Focusing the Viewfinder If the indicators displayed in the viewfinder are blurred, put your eye to the viewfinder and rotate the diopter adjustment control until the display is in sharp focus. The DISP/BACK Button The DISP/BACK button controls the display of indicators in the viewfinder and LCD monitor. N Indicators for the EVF and LCD must be selected separately. To choose the EVF display, place your eye to the viewfinder while using the DISP/BACK button. 1 Before You Begin Viewfinder Full screen Full screen (no indicators) Dual display (manual focus mode only) Standard indicators Standard (no indicators) 16 Camera Displays LCD Monitor Standard indicators No indicators 1 Before You Begin Dual display (manual focus mode only) Info display The Dual Display The dual display consists of a large full-frame window and a smaller close-up of the focus area. 17 Customizing the Standard Display To choose the items shown in the standard indicator display: 1 Display standard indicators. Use the DISP/BACK button to display standard indicators. 2 Select DISP. CUSTOM SETTING. Select D SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu. 3 Choose items. Highlight items and press MENU/OK to select or deselect. 1 Before You Begin • FRAMING GUIDELINE • ELECTRONIC LEVEL • FOCUS FRAME • AF DISTANCE INDICATOR • MF DISTANCE INDICATOR • HISTOGRAM • LIVE VIEW HIGHLIGHT ALERT • SHOOTING MODE • APERTURE/S-SPEED/ISO • INFORMATION BACKGROUND • Expo. Comp. (Digit) • Expo. Comp. (Scale) • FOCUS MODE • PHOTOMETRY • SHUTTER TYPE • FLASH • CONTINUOUS MODE • DUAL IS MODE • TOUCH SCREEN MODE • WHITE BALANCE • FILM SIMULATION • DYNAMIC RANGE • FRAMES REMAINING • IMAGE SIZE/QUALITY • MOVIE MODE & REC. TIME • 35mm FORMAT MODE • IMAGE TRANSFER ORDER • MIC LEVEL • BATTERY LEVEL • FRAMING OUTLINE 4 Save changes. Press DISP/BACK to save changes. 5 Exit the menus. Press DISP/BACK as needed to exit the menus and return to the shooting display. 18 Camera Displays Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down. For a 3D display (shown), press the function button to which ELECTRONIC LEVEL is assigned (P 174, 198). Pitch Roll Histograms Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis. Number of pixels Shadows Highlights Pixel brightness • Optimal exposure: Pixels are distributed in an even curve throughout the tone range. • Overexposed: Pixels are clustered on the right side of the graph. • Underexposed: Pixels are clustered on the left side of the graph. To view separate RGB histograms and a display showing areas of the frame that will be overexposed at current settings superimposed on the view through the lens, press the function button to which HISTOGRAM is assigned (P 174, 198). A Overexposed areas blink B RGB histograms 19 Before You Begin Framing Outline Enable FRAMING OUTLINE to make the borders of the frame easier to see against dark backgrounds. 1 Using the Menus To display the menus, press MENU/OK. Shooting Playback PLAY BACK MENU IMAGE QUALITY SETTING IMAGE QUALITY SWITCH SLOT RAW CONVERSION IMAGE SIZE RAW RECORDING ERASE 1 FILM SIMULATION SIMULTANEOUS DELETE(RAW SLOT1/JPG SLOT2) GRAIN EFFECT COLOR CHROME EFFECT CROP RESIZE Before You Begin DYNAMIC RANGE WHITE BALANCE PROTECT IMAGE ROTATE EXIT EXIT To navigate the menus: 1 Press MENU/OK to display the menus. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT COLOR CHROME EFFECT DYNAMIC RANGE WHITE BALANCE EXIT 2 Press the focus stick (focus lever) left to highlight the tab for the current menu. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT COLOR CHROME EFFECT DYNAMIC RANGE WHITE BALANCE EXIT Tab 3 Press the focus stick up or down to highlight the tab (H, G, A, F, B, E, C or D) containing the desired item. 4 Press the focus stick right to place the cursor in the menu. N • Use the front command dial to select menu tabs or page through menus and the rear command dial to highlight menu items. • The focus stick (focus lever) does not tilt diagonally. 20 Touch Screen Mode The LCD monitor also functions as a touch screen. TOUCH SCREEN SETTINGS ON TOUCH SCREEN ON/OFF EVF TOUCH SCREENOFF AREA SETTINGS EVF The LCD monitor can be used to select the focus area while pictures are being framed in the electronic viewfinder (EVF). Use D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > EVF TOUCH SCREEN AREA SETTINGS to choose the area of the monitor employed for touch controls. 21 1 Before You Begin Shooting Touch Controls To enable touch controls, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > TOUCH SCREEN ON/ OFF. LCD Monitor Touch controls can be used to choose the focus area. The operation performed can be selected by tapping the touch screen mode indicator in the display to cycle through the following options. 1 Before You Begin Mode Description • In focus mode S (AF-S), the camera focuses when you tap your AF AF OFF subject in the display. Focus locks at the current distance until you tap the AF OFF icon. • In focus mode C (AF-C), the camera initiates focus when you tap your subject in the display. The camera will continue to adjust focus for changes in the distance to the subject until you tap the AF OFF icon. • In manual focus mode (MF), you can tap the display to focus on the selected subject using autofocus. AREA Tap to select a point for focus or zoom. The focus frame will move to the selected point. OFF Touch focus disabled. O Different touch controls are used during focus zoom (P 110). N • To disable touch controls and hide the touch screen mode indicator, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF. • Touch control settings can be adjusted using G AF/MF SETTING > TOUCH SCREEN MODE. 22 Touch Screen Mode Touch Function Functions can be assigned to the following flick gestures in much the same way as function buttons (P 196): • Flick up: T-Fn1 • Flick left: T-Fn2 • Flick right: T-Fn3 • Flick down: T-Fn4 Before You Begin N In some cases, touch-function flick ges- 1 MIC LEVEL ADJUSTMENT tures display a menu; tap to select the desired option. SET CANCEL 23 Touch Screen Mode Playback Touch Controls When ON is selected for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF, touch controls can be used for the following playback operations: • Swipe: Swipe a finger across the display to 1 view other images. Before You Begin • Pinch-out: Place two fingers on the display and spread them apart to zoom in. • Pinch-in: Place two fingers on the display and slide them together to zoom out. N Pictures can be zoomed out until the entire image is visible but no further. • Double-tap: Tap the display twice to zoom in on the focus point. • Drag: View other areas of the image during playback zoom. 24 First Steps 25 Attaching the Strap Attach the strap clips to the camera and then attach the strap. 1 Attach a protective cover. Place a protective cover over the eyelet as shown, with the black side of the cover toward the camera. 2 Open a strap clip. Use the clip attaching tool (A) to open a strap clip (B). 2 First Steps Protective cover (A) (B) 3 26 Slide the clip onto the tool. Slide the clip onto the tool so that it hooks over the projection. Attaching the Strap 4 Place the strap clip on an eyelet. Hook the strap eyelet in the clip opening. Remove the tool, using the other hand to keep the clip in place. N Keep the tool in a safe place, as you will need it to open the strap clips when removing the strap. 2 Pass the clip through the eyelet. Rotate the clip fully through the eyelet until it clicks closed. 6 Fasten the strap. Insert the strap through a protective cover and strap clip and fasten the buckle as shown. First Steps 5 O To avoid dropping the camera, be sure the strap is correctly secured. Strap clip Repeat the above steps for the second eyelet. Buckle 27 Attaching a Lens The camera can be used with lenses for the FUJIFILM G-mount. 2 Remove the body cap from the camera and the rear cap from the lens. Place the lens on mount, keeping the marks on the lens and camera aligned (A), and then rotate the lens until it clicks into place (B). First Steps O • When attaching lenses, ensure that dust or other foreign matter does not enter the camera. • Be careful not to touch the camera’s internal parts. • Rotate the lens until it clicks securely into place. • Do not press the lens release button while attaching the lens. Removing Lenses To remove the lens, turn the camera off, then press the lens release button (A) and rotate the lens as shown (B). O To prevent dust accumulating on the lens or inside the camera, replace the lens caps and camera body cap when the lens is not attached. Lenses and Other Optional Accessories The camera can be used with lenses and accessories for the FUJIFILM G-mount. O Observe the following precautions when attaching or removing (exchanging) lenses. • Check that the lenses are free of dust and other foreign matter. • Do not change lenses in direct sunlight or under another bright light source. Light focused into the interior of the camera could cause it to malfunction. • Attach the lens caps before exchanging lenses. • See the manual provided with the lens for information on use. 28 Charging the Battery The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger. O • An NP-T125 rechargeable battery is supplied with the camera. • Charging takes about 140 minutes. 1 Connect the plug adapter. O The plug adapter supplied with the camera varies with the country or region of purchase; use the adapter appropriate to your country or region as described in the enclosed notice. Place the battery in the charger. Insert the battery in the orientation shown by the arrow. 3 Plug the charger in. Plug the charger into an indoor power outlet. The charging indicator will light. 4 Charge the battery. Remove the battery when charging is complete. First Steps 2 2 29 The Charging Indicator The charging indicator shows battery charge status as follows: On Battery status Battery not inserted. Battery fully charged. Battery charging. Blinks Battery fault. Charging indicator Off 2 Action Insert the battery. Remove the battery. — Unplug the charger and remove the battery. First Steps O • The supplied charger is compatible with power supplies of 100 to 240 volts (a plug adapter may be needed for overseas use). • Do not affix labels or other objects to the battery. Failure to observe this precaution could make it impossible to remove the battery from the camera. • Do not short the battery terminals. The battery could overheat. • Read the cautions in “The Battery and Power Supply”. • Use only battery chargers designated for use with the battery. Failure to observe this precaution could result in product malfunction. • Do not remove the labels from the battery or attempt to split or peel the outer casing. • The battery gradually loses its charge when not in use. Charge the battery one or two days before use. • If the battery fails to hold a charge, it has reached the end of its charging life and must be replaced. • Unplug the charger when it is not in use. • Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging. • Note that charging times increase at low or high temperatures. 30 Charging the Battery Charging via AC Adapter The battery inserted in the camera will also charge when the camera is powered by an optional AC-15V AC adapter. Charging takes about 120 minutes. 31 2 First Steps Battery charge status is shown by battery status icons when the camera is on (playback mode) and by the indicator lamp when the camera is off. Battery status icon (camera on) Indicator lamp (camera off ) Battery status On Battery charging Y (yellow) Off Charging complete N (green) Blinks Battery fault Z (red) Inserting the Battery After charging the battery, insert the battery in the camera as described below. 1 Open the battery-chamber cover. Slide the battery-chamber latch as shown and open the battery-chamber cover. O • Do not open the battery-chamber 2 First Steps cover when the camera is on. Failure to observe this precaution could damage image files or memory cards. • Do not use excessive force when handling the battery-chamber cover. 2 Insert the battery as shown. O • Insert the battery in the orientation shown. Do not use force or attempt to insert the battery upside down or backwards. • Confirm that the battery is securely latched. 32 Inserting the Battery 3 Close the battery-chamber cover. Close and latch the cover. O If the cover does not close, check that the battery is in the correct orientation. Do not attempt to force the cover shut. Removing the Battery Before removing the battery, turn the camera off and open the battery-chamber cover. First Steps To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown. 2 O The battery may become hot when used in high-temperature environments. Observe caution when removing the battery. 33 Inserting Memory Cards Pictures are stored on memory cards (sold separately). N The camera can be used with two cards, one in each of its two slots. 1 Open the memory card slot cover. Unlatch and open the cover. 2 First Steps O Do not open the memory card-slot cover when the camera is on. Failure to observe this precaution could damage image files or memory cards. 2 Insert the memory card. Holding the card in the orientation shown, slide it in until it clicks into place at the back of the slot. Close and latch the memory card slot cover. O Be sure card is in the correct orientation; do not insert at an angle or use force. 3 Format the memory card (P 156). O Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device. 34 Inserting Memory Cards Removing Memory Cards Before removing memory cards, turn the camera off and open the memory card slot cover. Press and release the card to eject it part way (to prevent the card falling from the slot, press the center of the card and release it slowly, without removing your finger from the card). The card can then be removed by hand. 2 Option Description Display The card in the second slot is used only when the card in the first slot is full. If the second slot is selected for D SAVE SEQUENTIAL DATA SET-UP > SWITCH SLOT (SEQUENTIAL), re(default) cording will start on the card in the second slot and switch to the first slot when the card in the second slot is full. BACKUP Each picture is recorded twice, once to each card. As for SEQUENTIAL, except that the RAW copy of pictures taken with FINE+RAW or NORMAL+RAW selected for RAW / JPEG H IMAGE QUALITY SETTING > IMAGE QUALITY will be saved to the card in the first slot and the JPEG copy to the card in the second slot. The card used to store movies can be selected using D SAVE DATA SET-UP > MOVIE FILE DESTINATION. 35 First Steps Using Two Cards The camera can be used with two cards, one in each of its two slots. At default settings, photos are saved to the card in the second slot only when the card in the first slot is full. This can be changed using D SAVE DATA SET-UP > CARD SLOT SETTING (STILL IMAGE). Inserting Memory Cards 2 Compatible Memory Cards • Fujifilm and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera. • UHS-II cards are recommended for use in this camera. • Use a UHS Speed Class 1 or better memory card when recording movies. • A list of supported memory cards is available on the Fujifilm website. For details, visit: http://www.fujifilm.com/support/digital_cameras/compatibility/. First Steps O • Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card. • Memory cards can be locked, making it impossible to format the card or to record or delete images. Before inserting a memory card, slide the write-protect switch to the unlocked position. • Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately. • miniSD or microSD adapters that are larger or smaller than memory cards may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card. • Do not affix labels or other objects to memory cards. Peeling labels can cause camera malfunction. • Movie recording may be interrupted with some types of memory card. • Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always use the camera to delete pictures; before editing or renaming files, copy them to a computer and edit or rename the copies, not the originals. Renaming the files on the camera can cause problems during playback. 36 Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off. Slide the switch to ON to turn the camera on, or to OFF to turn the camera off. O Fingerprints and other marks on the lens or viewfinder can affect picN • Press the a button to start playback. • Press the shutter button halfway to return to shooting mode. • The camera will turn off automatically if no operations are performed for the length of time selected for D POWER MANAGEMENT > AUTO POWER OFF. To reactivate the camera after it has turned off automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then back to ON. 37 First Steps tures or the view through the viewfinder. Keep the lens and viewfinder clean. 2 Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: 2 First Steps Indicator e f g h i i (red) j (blinks red) 38 Description Battery partially discharged. Battery about 80% full. Battery about 60% full. Battery about 40% full. Battery about 20% full. Low battery. Charge as soon as possible. Battery exhausted. Turn camera off and recharge battery. Basic Setup When you turn the camera on for the first time, you can choose a language and set the camera clock. At default settings, you can also pair the camera with a smartphone or tablet so that you can later synchronize the clocks or download pictures. Follow the steps below when turning the camera on for the first time. N If you intend to pair the camera with a smartphone or tablet, install 1 Turn the camera on. A language-selection dialog will be displayed. 2 Choose a language. Highlight a language and press MENU/OK. 3 Pair the camera with the smartphone or tablet. Press MENU/OK to pair the camera with a smartphone or tablet running the FUJIFILM Camera Remote app. PAIRING REGISTRATION PAIR WITH SMARTPHONE? N To skip pairing, press DISP/BACK. IMAGES CAN BE EASILY TRANSFERRED TO SMARTPHONE BY PAIRING SCAN QR CODE OR SEARCH FOR "FUJIFILM Camera Remote" APP ON THE WEB SET SKIP HELP 39 2 First Steps and launch the latest version of the FUJIFILM Camera Remote App on the smart device before proceeding. For more information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ 4 Check the time. When pairing is complete, you will be prompted to set the camera clock to the time reported by the smartphone or tablet. Check that the time is correct. PAIRING REGISTRATION PAIRING COMPLETE 1/ 1/2018 12:00 PM SET DATE/TIME FROM SMARTPHONE? SET N 2 5 CANCEL To set the clock manually, press DISP/BACK (P 41). First Steps Synchronize the camera settings with the settings configured on your smartphone or tablet. SMARTPHONE SYNC. SETTING LOCATION&TIME LOCATION TIME OFF SET N The option selected can be changed at any time using D CONNECTION SETTING > Bluetooth SETTINGS. 6 Set the clock. Press MENU/OK to set the camera clock to the time reported by the smartphone or tablet and exit to shooting mode. N If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on. Skipping the Current Step If you skip a step, a confirmation dialog will be displayed; select NO to avoid repeating any steps you skipped the next time the camera is turned on. 40 Basic Setup Choosing a Different Language To change the language: 1 Display language options. Select D USER SETTING > Qa. 2 Choose a language. Highlight the desired option and press MENU/OK. Changing the Time and Date To set the camera clock: 2 First Steps 1 Display DATE/TIME options. Select D USER SETTING > DATE/TIME. 2 Set the clock. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. Press MENU/OK to set the clock. 41 MEMO 42 Basic Photography and Playback 43 Taking Photographs (Mode P) This section describes how to take pictures using program AE (mode P). See pages 56–63 for information on S, A, and M modes. 1 Adjust settings for program AE. 3 Basic Photography and Playback A Aperture B Shutter speed C Focus mode Setting A (auto) A (auto) S (single AF) P 56 56 65 N To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. 2 44 Check the shooting mode. Confirm that P appears in the display. Taking Photographs (Mode P) 3 Ready the camera. • Hold the camera steady with both hands and brace your elbows against your sides. Shaking or unsteady hands can blur your shots. • To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from the lens and AF-assist illuminator. Basic Photography and Playback 4 3 Frame the picture. Lenses with Zoom Rings Use the zoom ring to frame the picture in the display. Rotate the ring left to zoom out, right to zoom in. 45 Taking Photographs (Mode P) 5 Focus. Press the shutter button halfway to focus. Focus indicator Focus frame • If the camera is able to focus, it will beep twice and focus frame and focus indicator will glow green. • If the camera is unable to focus, the focus frame will turn red, s 3 will be displayed, and the focus indicator will blink white. Basic Photography and Playback N • If the subject is poorly lit, the AF-assist illuminator may light to assist the focus operation. and exposure will lock when the shutter button is pressed halfway. Focus and exposure remain locked while the button is kept in this position (AF/AE lock). • The camera will focus on subjects at any distance in the macro and standard focus ranges. • Focus 6 46 Shoot. Smoothly press the shutter button the rest of the way down to take the picture. a Viewing Pictures Pictures can be viewed in the viewfinder or LCD monitor. To view pictures full frame, press a. 100-0001 N Pictures taken using other cameras are marked with a m (“gift image”) icon to warn that they may not display correctly and that playback zoom may not be available. Two Memory Cards If two memory cards are inserted, you can press and hold the a button to choose a card for playback. You can also select a card using the C PLAY BACK MENU > SWITCH SLOT option. 47 3 Basic Photography and Playback Additional pictures can be viewed by pressing the focus stick (focus lever) left or right or rotating the front command dial. Press the focus stick or rotate the dial right to view pictures in the order recorded, left to view pictures in reverse order. Keep the focus stick pressed to scroll rapidly to the desired frame. b Deleting Pictures Use the b button to delete pictures. O Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. 1 With a picture displayed full frame, press the b button and select FRAME. ERASE FRAME SELECTED FRAMES ALL FRAMES 3 Basic Photography and Playback 2 Press the focus stick (focus lever) left or right to scroll through pictures and press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures. N • Protected pictures cannot be deleted. Remove protection from any pictures you wish to delete (P 142). • Pictures can also be deleted from the menus using the C PLAY BACK MENU > ERASE option (P 138). 48 Movie Recording and Playback 49 F Recording Movies This section describes how to film movies in auto mode. 1 2 Press the drive button and select F MOVIE. Adjust settings for program AE. 4 Movie Recording and Playback A Aperture B Shutter speed C Focus mode Setting A (auto) A (auto) S (single AF) P 56 56 65 N To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. 3 50 Press the shutter button to start recording. A recording indicator (V) and the time remaining are displayed while recording is in progress. Recording Movies 4 Press the button again to end recording. Recording ends automatically when the maximum length is reached or the memory card is full. O • Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. • Note that the microphone may pick up lens noise and other sounds made by the camera during recording. • Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not indicate a malfunction. N • The indicator lamp lights while recording is in progress. • Zoom can be adjusted using the zoom ring on the lens (if available). • If the lens is equipped with an aperture ring, select the aperture Using an External Microphone Sound can be recorded with external microphones that connect using jacks 2.5 mm in diameter; microphones that require plug-in power cannot be used. See the microphone manual for details. N The dialog shown at right will be displayed when a microphone is connected to the microphone/remote release connector. Press MENU/OK and select MIC/REMOTE RELEASE > m MIC. CHECK MIC/REMOTE RELEASE SETTING SKIP SET 51 4 Movie Recording and Playback mode before beginning recording. If an option other than A is selected, shutter speed and aperture can be adjusted while recording is in progress. • During recording, you can change exposure compensation by up to ±2 EV. • Recording may be unavailable at some settings, while in other cases settings may not apply during recording. Recording Movies Adjusting Movie Settings • Frame size and rate can be selected using B MOVIE SETTING > MOVIE MODE. • To choose the card used to store movies, use D SAVE DATA SET-UP > MOVIE FILE DESTINATION. • Focus mode is selected using the focus mode selector; for continuous focus adjustment, select C, or choose S and enable Intelligent Face Detection. Intelligent Face Detection is not available in focus mode M. Depth of Field Choose low f-numbers to soften background details. 4 Movie Recording and Playback 52 a Viewing Movies View movies on the camera. In full-frame playback, movies are identified by a W icon. Press the focus stick (focus lever) down to start movie playback. 01/01/2018 10:00 AM PLAY +1.0 12800 The following operations can be performed while a movie is displayed: 4 Left/right View other pictures Playback in Playback progress ((x x) paused (y (y) End playback Pause playback Start/resume playback Single frame rewind/ Adjust speed advance Progress is shown in the display during playback. 29m59s O Do not cover the speaker during playback. STOP PAUSE N Press MENU/OK to pause playback and display volume controls. Press the focus stick (focus lever) up or down to adjust the volume; press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME. 53 Movie Recording and Playback Focus stick (focus lever) Full-frame playback Up — Down Start playback Viewing Movies Playback Speed Press the focus stick (focus lever) left or right to adjust playback speed during playback. Speed is shown by the number of arrows (M or N). Arrows 4 Movie Recording and Playback 54 29m59s Taking Photographs 55 P, S, A, and M Modes P, S, A, and M modes give you varying degrees of control over shutter speed and aperture. Mode P: Program AE Let the camera choose shutter speed and aperture for optimal exposure. Other values that produce the same exposure can be selected with program shift. 5 Taking Photographs A Shutter speed B Aperture Setting A (auto) A (auto) Confirm that P appears in the display. O If the subject is outside the metering range of the camera, the shutter speed and aperture displays will show “– – –”. N To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. 56 P, S, A, and M Modes Program Shift If desired, you can rotate the rear command dial to select other combinations of shutter speed and aperture without altering exposure (program shift). Aperture Shutter speed O Program shift is not available in any of the following circumstances: • With flash units that support TTL auto • When an auto option is selected for H IMAGE QUALITY SETTING > DYNAMIC RANGE • In movie mode N To cancel program shift, turn the camera off. 5 Taking Photographs 57 Mode S: Shutter-Priority AE Choose a shutter speed and let the camera adjust aperture for optimal exposure. A Shutter speed B Aperture Setting User-selected A (auto) Confirm that S appears in the display. 5 O • If the correct exposure cannot be achieved at the selected shutter Taking Photographs speed, aperture will be displayed in red. • If the subject is outside the metering range of the camera, the aperture display will show “– – –”. N • To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. • Shutter speed can also be adjusted in increments of 1⁄3 EV by rotating the rear command dial. • Shutter speed can be adjusted while the shutter button is pressed halfway. 58 P, S, A, and M Modes Time (T) Rotate the shutter speed dial to T (time) to choose slow shutter speeds for long time-exposures. Use of a tripod is recommended to prevent the camera moving during the exposure. 1 Rotate the shutter speed dial to T. 2 Rotate the rear command dial to choose a shutter speed. 5 Press the shutter button all the way down to take a picture at the selected shutter speed. At speeds of 1 s or slower, a count-down timer will be displayed while the exposure is in progress. N To reduce “noise” (mottling) in long time-exposures, select ON for H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting. 59 Taking Photographs 3 Bulb (B) Select a shutter speed of B (bulb) for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the camera moving during the exposure. 5 1 Rotate the shutter speed dial to B. 2 Press the shutter button all the way down. The shutter will remain open for up to 60 minutes while the shutter button is pressed; the display shows the time elapsed since the exposure started. Taking Photographs N • Selecting an aperture of A fixes shutter speed at 30 s. • To reduce “noise” (mottling) in long time-exposures, select ON for H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting. Using a Remote Release A remote release can be used for long time-exposures. When using an optional RR-100 remote release or an electronic release from third-party suppliers, connect it to microphone/remote release connector. 60 P, S, A, and M Modes Mode A: Aperture-Priority AE Choose an aperture and let the camera adjust shutter speed for optimal exposure. A Shutter speed B Aperture Setting A (auto) User-selected Confirm that A appears in the display. 32 O • If the correct exposure cannot be achieved at the selected aperture, speed display will show “– – –”. N • To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. • Rotate the lens aperture ring to adjust aperture. • Aperture can be adjusted even while the shutter button is pressed halfway. Previewing Depth of Field When PREVIEW DEPTH OF FIELD is assigned to a function button, pressing the button displays a L icon and stops aperture down to the selected setting, allowing depth of field to be previewed in the display. 32 61 Taking Photographs shutter speed will be displayed in red. • If the subject is outside the metering range of the camera, the shutter 5 Mode M: Manual Exposure In manual mode, the user controls both shutter speed and aperture. Shots can be deliberately overexposed (brighter) or underexposed (darker), opening the door for a variety of individual creative expression. The amount the picture would be under- or over-exposed at current settings is shown by the exposure indicator; adjust shutter speed and aperture until the desired exposure is reached. 5 A Shutter speed B Aperture Setting User-selected User-selected Taking Photographs Confirm that M appears in the display. 32 N • To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. • Rotate the lens aperture ring to adjust aperture. • Shutter speed can be adjusted in increments of 1⁄3 EV by rotating the rear command dial. 62 P, S, A, and M Modes Exposure Preview To preview exposure in the LCD monitor, select an option other than OFF for D SCREEN SET-UP > PREVIEW EXP./WB IN MANUAL MODE. N Select OFF when using the flash or on other occasions on which exposure may change when the picture is taken. 5 Taking Photographs 63 Autofocus Take pictures using autofocus. 1 Rotate the focus mode selector to S or C (P 65). 2 3 Choose an AF mode (P 67). 4 Take pictures. Choose the position and size of the focus frame (P 69). 5 Taking Photographs N For information on the autofocus system, visit: http://fujifilm-x.com/af/en/index.html 64 Autofocus Focus Mode Use the focus mode selector to choose how the camera focuses. Choose from the following options: Mode S (AF-S) C (AF-C) M (manual) Description Single AF: Focus locks while the shutter button is pressed halfway. Choose for stationary subjects. Continuous AF: Focus is continually adjusted to reflect changes in the distance to the subject while the shutter button is pressed halfway. Use for subjects that are in motion. Eye-detection AF is not available. Manual: Focus manually using the lens focus ring. Choose for manual control of focus or in situations in which the camera is unable to focus using autofocus (P 72). the lens is in manual focus mode. • If ON is selected for G AF/MF SETTING > PRE-AF, focus will be adjusted continuously in modes S and C even when the shutter button is not pressed. 65 Taking Photographs N • Regardless of the option selected, manual focus will be used when 5 The Focus Indicator Focus status is shown by the focus indicator. Focus indicator Focus status ( ) Camera focusing. Subject in focus; focus locked (focus z (lights green) mode S). Subject in focus (focus mode C). (z) (lights green) Focus is automatically adjusted for Focus indicator changes in distance to subject. A (blinks white) Camera unable to focus. Manual focus (focus mode M). j 5 Taking Photographs 66 Autofocus Autofocus Options (AF Mode) Choose how the camera focuses in modes S and C. 1 Press a function button (by default, Fn5) to display AF mode options. 2 Choose an AF mode. N • The Fn5 button can be assigned other roles using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. The role described above can also be assigned to other function buttons (P 198). • AF mode can also be selected using G AF/MF SETTING > AF MODE. How the camera focuses depends on the focus mode. 5 Focus Mode S (AF-S) Description Sample image Taking Photographs Option Camera focuses on subject in selected focus point. Use for pinSINGLE POINT point focus on selected subject. r y ZONE Camera focuses on subject in selected focus zone. Focus zones include multiple focus points, making it easier to focus on subjects in motion. 67 Option Description Sample image Camera focuses automatically on high-contrast subjects; display WIDE/TRACKING shows areas in focus. z Focus Mode C (AF-C) Option Description Focus tracks subject at selected focus point. Use for subjects moving SINGLE POINT toward or away from camera. r 5 Taking Photographs y ZONE Focus tracks subject in selected focus zone. Use for subjects that are moving fairly predictably. Focus tracks subjects moving z WIDE/TRACKING through wide area of frame. 68 Sample image Autofocus Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > FOCUS AREA to view the focus-point display. Use the focus stick (focus lever) and rear command dial to choose a focus area. N The focus point can also be selected using touch controls (P 21). Selecting a Focus Point Use the focus stick (focus lever) to choose the focus point and the rear command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode. Taking Photographs Focus stick 5 Rear command dial AF mode Tilt Press Select focus point Select center focus point r y z Rotate Press Choose from 6 frame sizes Restore original size Choose from 3 frame sizes — N Manual focus-point selection is not available when z WIDE/TRACKING is selected in focus mode S. 69 The Focus-Point Display The focus-point display varies with the option selected for AF mode. N Focus frames are shown by small squares (), focus zones by the large squares. r SINGLE POINT 5 Taking Photographs Number of able can be G AF/MF NUMBER POINTS. AF mode y ZONE z WIDE/TRACKING points avail- Choose from zones with Position focus frame over selected using 7 × 7, 5 × 5, or 3 × 3 focus subject you want to track. SETTING > points. OF FOCUS Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. • Very shiny subjects such as mirrors or car bodies. • Subjects photographed through a window or other reflective object. • Dark subjects and subjects that absorb rather than reflect light, such as hair or fur. • Insubstantial subjects, such as smoke or flame. • Subjects that show little contrast with the background. • Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a subject photographed against a backdrop of highly contrasting elements). 70 Autofocus Checking Focus To zoom in on the current focus area for precise focus, press the center of the rear command dial. Use the focus stick (focus lever) to choose another focus area. Press the center of the rear command dial again to cancel zoom. Normal display Focus zoom N • In focus mode S, zoom can be adjusted by rotating the rear command dial. • The focus stick can be used to select the focus area while zoom is in 71 5 Taking Photographs effect. • In focus mode S, select r SINGLE POINT for AF MODE. • Focus zoom is not available in focus mode C or when G AF/MF SETTING > PRE-AF is on. • Use D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING to change the function performed by the center of the rear command dial. You can also assign its default function to other controls (P 198). Manual Focus Adjust focus manually. 1 Rotate the focus mode selector to M. j will appear in the display. 5.6 5 Taking Photographs 2 Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. 3 Take pictures. N • Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the direction of rotation of the focus ring. • Regardless of the option selected, manual focus will be used when the lens is in manual focus mode. 72 Manual Focus Quick Focus • To use autofocus to focus on the subject in the selected focus area, press the button to which focus lock or AF-ON has been assigned (the size of the focus area can be chosen with the rear command dial). • In manual focus mode, you can use this feature to quickly focus on a chosen subject using either single or continuous AF according to the option chosen for G AF/MF SETTING > INSTANT AF SETTING. 5 Taking Photographs 73 Checking Focus A variety of options are available for checking focus in manual focus mode. 5 The Manual Focus Indicator The manual focus indicator indicates how closely the focus distance matches the distance to the subject in the focus brackets. The white line indicates the distance to the subject in the focus area (in meters or feet according to the option selected for D SCREEN SET-UP > FOCUS SCALE UNITS in the setup menu), the blue bar the depth of field, or in other words the distance in front of and behind the subject that appears to be in focus. 5.6 Focus distance (white line) Depth of field Taking Photographs N • If both AF DISTANCE INDICATOR and MF DISTANCE INDICATOR are selected in the D SCREEN SET-UP > DISP. CUSTOM SETTING list, the manual focus indicator can also be viewed using the depthof-field indicator in the standard display. Use the DISP/BACK button to display standard indicators. • Use the G AF/MF SETTING > DEPTH-OF-FIELD SCALE option to choose how depth of field is displayed. Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays. 74 Manual Focus Focus Zoom If ON is selected for G AF/MF SETTING > FOCUS CHECK, the camera will automatically zoom in on the selected focus area when the focus ring is rotated. Press the center of the rear command dial to exit zoom. N • Use the focus stick (focus lever) to choose another focus area. • Zoom can be adjusted by rotating the rear command dial. Focus Peaking Select FOCUS PEAK HIGHLIGHT for G AF/MF SETTING > MF ASSIST to highlight high-contrast outlines. When focusing, rotate the focus ring until the subject is highlighted. N The MF ASSIST menu can be displayed by pressing and holding the center of the rear command dial. 5 Taking Photographs 75 N Sensitivity Adjust the camera’s sensitivity to light. Adjust ISO sensitivity using a function button (by default, Fn1). Option 5 Description Sensitivity is automatically adjusted in response to shooting AUTO1 conditions according to combination of standard and maxAUTO2 imum sensitivity and minimum shutter speed chosen for AUTO3 A SHOOTING SETTING > ISO. Choose from AUTO1, AUTO2, and AUTO3 (P 77). Adjust sensitivity manually. Selected value is shown in display. 12800–100 H (102400/51200/25600), Choose for special situations. Note that mottling may apL (50) pear in pictures taken at H, while L reduces dynamic range. Taking Photographs N • The Fn1 button can be assigned other roles using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. The role described above can also be assigned to other function buttons (P 198). • ISO sensitivity can also be adjusted using A SHOOTING SETTING > ISO. • Sensitivity is not reset when the camera is turned off. • If desired, you can use D BUTTON/DIAL SETTING > COMMAND DIAL SETTING to configure the camera so that ISO sensitivity can be adjusted using the front or rear command dial. Adjusting Sensitivity High values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities. 76 Sensitivity AUTO Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3. Item DEFAULT SENSITIVITY MAX. SENSITIVITY MIN. SHUTTER SPEED Options 12800–100 12800–200 ⁄–¼ SEC AUTO1 800 Default AUTO2 100 1600 ⁄ SEC AUTO3 3200 The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for MIN. SHUTTER SPEED. N • If the value selected for DEFAULT SENSITIVITY is higher than that 77 5 Taking Photographs selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY. • The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY. C Metering Choose how the camera meters exposure. A SHOOTING SETTING > PHOTOMETRY offers a choice of the following metering options: O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE OFF/EYE OFF. Mode o (multi) p (centerweighted) v 5 (spot) Taking Photographs w (average) 78 Description The camera instantly determines exposure based on an analysis of composition, color, and brightness distribution. Recommended in most situations. The camera meters the entire frame but assigns the greatest weight to the area at the center. The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total. Recommended with backlit subjects and in other cases in which the background is much brighter or darker than the main subject. Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white. d Exposure Compensation Adjust exposure. Rotate the exposure compensation dial. N The amount of compensation available varies with the shooting mode. 5 Taking Photographs 79 Exposure Compensation C (Custom) When the exposure compensation dial is rotated to C, you can adjust exposure compensation after pressing a function button (by default, Fn2). Rotate the front command dial to choose a value. N • The Fn2 button can be assigned other roles using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. The role described above can also be assigned to other function buttons (P 198). • The command dials can be used to set exposure compensation to values between −5 and +5 EV. • Press the Fn2 to toggle between aperture and exposure compensation. 5 Taking Photographs 80 Focus/Exposure Lock Focus and exposure lock when the shutter button is pressed halfway. 1 Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). 2 Press the button all the way down. N Focus lock using the shutter button is only available when ON is selected for D BUTTON/DIAL SETTING > SHUTTER AF, SHUTTER AE. 5 Taking Photographs 81 Focus/Exposure Lock The AF-L and AE-L Buttons Focus and exposure can also be locked using function buttons. At default settings, the Fn3 button locks exposure, the Fn4 button focus. • While the assigned control is pressed, pressing the shutter button halfway will not end the lock. • If AE&AF ON/OFF SWITCH is selected for D BUTTON/DIAL SETTING > AE/ AF-LOCK MODE, the lock can only be ended by pressing the control a second time. Fn3 button (exposure lock) Fn4 button (focus lock) 5 Taking Photographs N The Fn3 and Fn4 buttons can be assigned other roles using D BUTTON/ DIAL SETTING > FUNCTION (Fn) SETTING. Exposure and focus lock can also be assigned to other function buttons (P 198). 82 BKT Bracketing Automatically vary settings over a series of pictures. Press the drive button and choose from the options below. O AE BKT Use A SHOOTING SETTING > AE BKT SETTING to choose the bracketing amount, bracketing order, and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount. N Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system. X FILM SIMULATION BKT Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings, chosen using A SHOOTING SETTING > FILM SIMULATION BKT. 83 5 Taking Photographs W ISO BKT Select a bracketing amount (±1⁄3, ±2⁄3, or ±1) in the drive mode display. Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount. Bracketing V WHITE BALANCE BKT Select a bracketing amount (±1, ±2, or ±3) in the drive mode display. Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount. Y DYNAMIC RANGE BKT Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third. N While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 640; the sensitivity previously in effect is restored when bracketing ends. 5 Taking Photographs Z FOCUS BKT Each time the shutter button is pressed, the camera takes a series of photos, varying focus with each shot. The number of shots, the amount focus changes with each shot, and the interval between shots can be selected using A SHOOTING SETTING > FOCUS BKT. 84 I Continuous Shooting (Burst Mode) Capture motion in a series of pictures. Press the drive button and select I CONTINUOUS. The camera will take pictures while the shutter button is pressed; shooting ends when the shutter button is released or the memory card is full. O • If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder. • Shooting ends when the memory card is full; the camera will record all photos shot to that point. Burst shooting may not begin if the space available on the memory card is insufficient. • Frame rates may slow as more shots are taken. • Frame rate varies with the scene, shutter speed, sensitivity, and focus mode. • Depending on shooting conditions, frame rates may slow or the flash may not fire. • Recording times may increase during burst shooting. N Depending on such factors as aperture, sensitivity, and exposure compensation, exposure may not be adjusted automatically. 85 Taking Photographs Exposure To vary exposure with each shot, select OFF for D BUTTON/DIAL SETTING > SHUTTER AE. 5 j Multiple Exposures Create a photograph that combines two exposures. 1 2 3 Press the drive button and select j MULTIPLE EXPOSURE. Take the first shot. Press MENU/OK. The first shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot. N • To return to Step 2 and retake the 5 NEXT RETRY Taking Photographs first shot, press the focus stick (focus lever) left. • To save the first shot and exit without creating a multiple exposure, press DISP/BACK. 4 EXIT Take the second shot, using the first frame as a guide. EXIT 30 5 2.0 Press MENU/OK to create the multiple exposure, or press the focus stick left to return to Step 4 and retake the second shot. RETRY O 86 EXIT Multiple exposures cannot be recorded via tethered shooting (P 187). The Shooting Menus 87 H IMAGE QUALITY SETTING Adjust image quality settings. To display image quality settings, press MENU/OK in the shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT COLOR CHROME EFFECT DYNAMIC RANGE WHITE BALANCE EXIT N The options available vary with the shooting mode selected. IMAGE SIZE Choose the size and aspect ratio at which still pictures are recorded. Option O4:3 O3:2 O 16 : 9 O1:1 O 65 : 24 O5:4 O7:6 6 The Shooting Menus Image size 8256 × 6192 8256 × 5504 8256 × 4640 6192 × 6192 8256 × 3048 7744 × 6192 7232 × 6192 Option Q4:3 Q3:2 Q 16 : 9 Q1:1 Q 65 : 24 Q5:4 Q7:6 Image size 4000 × 3000 4000 × 2664 4000 × 2248 2992 × 2992 4000 × 1480 3744 × 3000 3504 × 3000 N IMAGE SIZE is not reset when the camera is turned off or another shooting mode is selected. 88 IMAGE QUALITY SETTING IMAGE QUALITY Choose a file format and compression ratio. Option SUPER FINE FINE Description Very low compression ratios are used for maximum image quality. Low compression ratios are used for higher-quality images. Higher compression ratios are used to increase the number of NORMAL images that can be stored. SUPER FINE + RAW Record both RAW and super-fine quality JPEG pictures. Record both RAW and fine-quality JPEG images. FINE + RAW NORMAL + RAW Record both RAW and normal-quality JPEG images. Record RAW images only. RAW The Function Buttons To toggle RAW image quality on or off for a single shot, assign RAW to a function button (P 198). Press the button once to select the option in the right column, again to return to the original setting (left column). Option selected by pressing function button to which RAW is assigned SUPER FINE + RAW FINE + RAW NORMAL + RAW SUPER FINE FINE NORMAL FINE RAW RECORDING Choose whether to compress RAW images. Option Description UNCOMPRESSED RAW images are not compressed. RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data. The images can be LOSSLESS viewed in RAW FILE CONVERTER EX (P 234), FUJIFILM X RAW COMPRESSED STUDIO (P 235), or other software that supports “lossless” RAW compression. 89 6 The Shooting Menus Option currently selected for IMAGE QUALITY SUPER FINE FINE NORMAL SUPER FINE + RAW FINE + RAW NORMAL + RAW RAW FILM SIMULATION Simulate the effects of different kinds of film, including blackand-white (with or without color filters). Choose a palette according to your subject and creative intent. Option 6 The Shooting Menus Description Standard color reproduction. Suited to a wide range of c PROVIA/STANDARD subjects, from portraits to landscapes. A high-contrast palette of saturated colors, suited to nad Velvia/VIVID ture photos. Enhances the range of hues available for skin tones in portraits while preserving the bright blues of daylight skies. e ASTIA/SOFT Recommended for outdoor portrait photography. i CLASSIC CHROME Soft color and enhanced shadow contrast for a calm look. Offers slightly more contrast than h PRO Neg. Std. g PRO Neg. Hi Recommended for outdoor portrait photography. A soft-toned palette. The range of hues available for skin tones is enhanced, making this a good choice for studio h PRO Neg. Std portrait photography. Take black-and-white photos with rich gradation and outa ACROS * standing sharpness. b MONOCHROME * Take pictures in standard black and white. Take pictures in sepia. f SEPIA * Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color. The yellow (Ye) filter deepens purples and blues and the red (R) filter blues and greens. The green (G) filter deepens reds and browns, including skin tones, making it a good choice for portraits. N • Film simulation options can be combined with tone and sharpness settings. • Film simulation settings can also be accessed via shortcuts (P 192). • For more information, visit: http://fujifilm-x.com/en/x-stories/the-world-offilm-simulation-episode-1/ 90 IMAGE QUALITY SETTING GRAIN EFFECT Add a film grain effect. Select an amount (STRONG or WEAK) or choose OFF to turn film grain off. STRONG Options WEAK OFF COLOR CHROME EFFECT Deepen colors in shadows. Select an amount (STRONG or WEAK) or choose OFF to turn the effect off. STRONG Options WEAK OFF O COLOR CHROME EFFECT is not available during bracketing or burst photography. 6 The Shooting Menus 91 DYNAMIC RANGE Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights when photographing high-contrast scenes. Higher values are recommended for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn leaves, and portraits taken against a blue sky, and for white objects or people wearing white. Options AUTO V 100% W 200% X 400% O Mottling may appear in pictures taken at higher values. Choose a value according to the scene. N • If AUTO is selected, the camera will automatically choose either V 100% or W 200% according to the subject and shooting conditions. Shutter speed and aperture will be displayed when the shutter button is pressed halfway. • W 200% is available at sensitivities of from ISO 200 to ISO 12800, X 400% at sensitivities of from ISO 400 to 12800. 6 The Shooting Menus 92 IMAGE QUALITY SETTING WHITE BALANCE For natural colors, choose a white balance option that matches the light source. Option AUTO k/l/m k i j k l m n g Description White balance is adjusted automatically. Measure a value for white balance. Choose a color temperature. For subjects in direct sunlight. For subjects in the shade. Use under “daylight” fluorescent lights. Use under “warm white” fluorescent lights. Use under “cool white” fluorescent lights. Use under incandescent lighting. Reduces the blue cast typically associated with underwater lighting. N • In conditions in which AUTO fails to produce the desired results—for Fine-Tuning White Balance Pressing MENU/OK after selecting a white balance option displays a fine-tuning dialog; use the focus stick (focus lever) to fine-tune white balance. WB SHIFT SET N • To exit without fine-tuning white balance, press DISP/BACK after selecting a white balance option. • The focus stick (focus lever) does not tilt diagonally. 93 6 The Shooting Menus example, under certain types of lighting or in close-ups of portrait subjects—use custom white balance or choose a white balance option suited to the light source. • White balance is adjusted for flash lighting only in AUTO and g modes. Turn the flash off using other white balance options. • White balance options can also be accessed via shortcuts (P 192). Custom White Balance Choose k, l, or m to adjust white CUSTOM 1 balance for unusual lighting conditions. White balance measurement options will be displayed; frame a white object so that it fills the display and press the shutter SHUTTER : NEW WB SHIFT NOT CHANGE button all the way down to measure white balance (to select the most recent custom value and exit without measuring white balance, press DISP/BACK, or press MENU/OK to select the most recent value and display the fine-tuning dialog). • If “COMPLETED !” is displayed, press MENU/OK COMPLETED ! to set white balance to the measured value. SET 6 CANCEL • If “UNDER” is displayed, raise exposure compensation and try again. • If “OVER” is displayed, lower exposure compensation and try again. The Shooting Menus 94 IMAGE QUALITY SETTING k: Color Temperature Selecting k in the white balance menu displays a list of color temperatures; highlight a color temperature and press MENU/OK to select the highlighted option and display the fine-tuning dialog. WHITE BALANCE COLOR TEMPERATURE R:0 B:0 SET SHIFT 10000K 9100K 8300K 7700K 7100K Color Temperature Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources with a color temperature close to that of direct sunlight appear white; light sources with a lower color temperature have a yellow or red cast, while those with a higher color temperature are tinged with blue. You can match color temperature to the light source, or choose options that differ sharply from the color of the light source to make pictures “warmer” or “colder.” 6 The Shooting Menus 95 HIGHLIGHT TONE Adjust the appearance of highlights. +4 +3 +2 Options +1 0 −1 −2 0 −1 −2 SHADOW TONE Adjust the appearance of shadows. +4 +3 +2 Options +1 COLOR Adjust color density. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 Options 0 −1 −2 −3 −4 SHARPNESS Sharpen or soften outlines. 6 The Shooting Menus +4 96 +3 +2 +1 IMAGE QUALITY SETTING NOISE REDUCTION Reduce noise in pictures taken at high sensitivities. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 LONG EXPOSURE NR Select ON to reduce mottling in long time-exposures. Options ON OFF LENS MODULATION OPTIMIZER Select ON to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens. Options ON OFF COLOR SPACE Choose the gamut of colors available for color reproduction. The Shooting Menus Option sRGB Adobe RGB 6 Description Recommended in most situations. For commercial printing. 97 PIXEL MAPPING Use this option if you notice bright spots in your pictures. 1 Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab. 2 Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. O • Results are not guaranteed. • Be sure the battery is fully charged before beginning pixel mapping. • Pixel mapping is not available when the camera temperature is elevated. • Processing may take a few seconds. SELECT CUSTOM SETTING Recall settings saved with EDIT/SAVE CUSTOM SETTING. Settings can be recalled from any of the seven custom settings banks. Banks 6 CUSTOM 1 CUSTOM 2 The Shooting Menus CUSTOM 5 98 CUSTOM 3 CUSTOM 6 CUSTOM 4 CUSTOM 7 IMAGE QUALITY SETTING EDIT/SAVE CUSTOM SETTING Save up to 7 sets of custom camera settings for commonly-encountered situations. Saved settings can be recalled using H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING. 1 Press MENU/OK in shooting mode to display the shooting menu. Select the H IMAGE QUALITY SETTING tab, then highlight EDIT/SAVE CUSTOM SETTING and press MENU/OK. 2 Highlight a custom settings bank and press MENU/OK to select. 3 Adjust the following as desired: • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • NOISE REDUCTION Press DISP/BACK. A confirmation dialog will be displayed; highlight OK and press MENU/OK. CUSTOM 1 CUSTOM 2 CUSTOM 3 PIXEL MAPPING CUSTOM 4 CUSTOM 5 SELECT CUSTOM SETTING CUSTOM 6 EDIT/SAVE CUSTOM SETTING CUSTOM 7 CUSTOM 1 SAVE CURRENT SETTINGS ISO DYNAMIC RANGE FILM SIMULATION GRAIN EFFECT COLOR CHROME EFFECT 6 WHITE BALANCE HIGHLIGHT TONE The Shooting Menus 4 • ISO • DYNAMIC RANGE • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • WHITE BALANCE IMAGE QUALITY SETTING SAVE CUSTOM SETTING CUSTOM 1 SET OK? OK CANCEL N • To store current camera settings in the selected bank, highlight SAVE CURRENT SETTINGS in Step 3 and press MENU/OK. • To restore default settings for the current bank, select RESET. • Banks can be renamed using EDIT CUSTOM NAME. 99 G AF/MF SETTING Adjust focus settings. To display focus settings, press MENU/OK in the shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA AF MODE STORE AF MODE BY ORIENTATION RAPID AF AF POINT DISPLAY NUMBER OF FOCUS POINTS PRE-AF AF ILLUMINATOR EXIT N The options available vary with the shooting mode selected. FOCUS AREA Choose the focus area for autofocus, manual focus, and focus zoom. 6 The Shooting Menus 100 AF/MF SETTING AF MODE Choose the AF mode for focus modes S and C. Option Description The camera focuses on the subject in the selected focus point. The number of focus points available can be selected using G AF/MF r SINGLE POINT SETTING > NUMBER OF FOCUS POINTS. Use for pin-point focus on a selected subject. The camera focuses on the subject in the selected focus zone. y Focus zones include multiple focus points, making it easier to ZONE focus on subjects that are in motion. • In focus mode S, the camera automatically focuses on high-contrast subjects; the areas in focus are shown in the display. • In focus mode C, the camera tracks focus on the subject in z WIDE/TRACKING the selected focus point while the shutter button is pressed halfway. The camera may be unable to focus on small objects or subjects that are moving rapidly. 6 The Shooting Menus 101 STORE AF MODE BY ORIENTATION Choose whether the focus mode and focus area used when the camera is in portrait orientation are stored separately from those used when the camera is in landscape orientation. Option Description OFF The same settings are used in both orientations. FOCUS AREA ONLY The focus area for each orientation can be selected separately. ON The focus mode and focus area can be selected separately. RAPID AF Select ON for faster focus times. Display quality will drop while the camera focuses. Options ON 6 OFF AF POINT DISPLAYyz Choose whether individual focus frames are displayed when ZONE or WIDE/TRACKING is selected for G AF/MF SETTING > AF MODE. The Shooting Menus Options ON 102 OFF AF/MF SETTING NUMBER OF FOCUS POINTS Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected for AF MODE. Option 117 POINTS (9 × 13) 425 POINTS (17 × 25) Description Choose from 117 focus points arranged in a 9- by 13-point grid. Choose from 425 focus points arranged in a 17- by 25-point grid. PRE-AF If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway. The camera adjusts focus continuously, allowing it to focus faster when the shutter button is pressed halfway. Choosing this option helps prevent missed shots. Options ON 6 Choosing ON increases the drain on the battery. AF ILLUMINATOR If ON is selected, the AF-assist illuminator will light to assist autofocus. Options ON OFF O • The camera may be unable to focus using the AF-assist illuminator in some cases. • If the camera is unable to focus, try increasing the distance to the subject. • Avoid shining the AF-assist illuminator directly into your subject’s eyes. 103 The Shooting Menus O OFF FACE/EYE DETECTION SETTING Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing on the background in group portraits. Choose for shots that emphasize portrait subjects. You can also choose whether the camera detects and focuses on eyes when Intelligent Face Detection is on. Choose from the following options: Option FACE ON/EYE OFF Description Intelligent Face Detection only. The camera automatically chooses which eye to focus FACE ON/EYE AUTO on when a face is detected. The camera focuses on the right eye of subjects deFACE ON/RIGHT EYE PRIORITY tected using Intelligent Face Detection. The camera focuses on the left eye of subjects detectFACE ON/LEFT EYE PRIORITY ed using Intelligent Face Detection. FACE OFF/EYE OFF Intelligent Face Detection and eye priority off. 6 The Shooting Menus O • If the subject moves as the shutter button is pressed, the face may not be in the area indicated by the green border when the picture is taken. • In some modes, the camera may set exposure for the frame as a whole rather than the portrait subject. N • The face selected by the camera is indicated by a green border. • If there is more than one face in the frame, the camera will select the face closest to the center; other faces are indicated by white borders. • Faces can be detected with the camera in vertical or horizontal orientation. • If the camera is unable to detect the subject’s eyes because they are hidden by hair, glasses, or other objects, the camera will instead focus on faces. • Face/eye detection options can also be accessed via shortcuts (P 192). 104 AF/MF SETTING AF+MF If ON is selected in focus mode S and focus has been locked (whether by pressing the shutter button halfway or by other means), focus lock can be ended and focus adjusted manually by rotating the focus ring. Options ON OFF O • Lenses with a focus distance indicator must be set to manual focus mode (MF) before this option can be used. Selecting MF disables the focus distance indicator. • If the lens is equipped with a focus distance indicator, set the focus ring to the center, as the camera may fail to focus if the ring is set to infinity or the minimum focus distance. N Focus peaking can be used to check focus. To enable focus peaking, select FOCUS PEAK HIGHLIGHT for MF ASSIST. 105 6 The Shooting Menus AF + MF Focus Zoom When ON is selected for G AF/MF SETTING > FOCUS CHECK and SINGLE POINT selected for AF MODE, focus zoom can be used to zoom in on the selected focus area. The zoom ratio can be selected using the rear command dial. MF ASSIST Choose how focus is displayed in manual focus mode. Option Description STANDARD Focus is displayed normally. FOCUS PEAK The camera heightens high-contrast outlines. Choose a color and HIGHLIGHT peaking level. N You can also choose MF assist options by holding the center of the rear command dial. FOCUS CHECK If ON is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode. Options ON OFF N • Pressing the center of the rear command dial cancels focus zoom. 6 • The zoom position is centered on the current focus area and changes when the focus area is changed. The Shooting Menus 106 AF/MF SETTING INTERLOCK SPOT AE & FOCUS AREA Select ON to meter the current focus frame when SINGLE POINT is selected for AF MODE and SPOT is selected for PHOTOMETRY. Options ON OFF INSTANT AF SETTING Choose whether the camera focuses using single AF (AF-S) or continuous AF (AF-C) when a button to which focus lock or AF-ON is assigned is pressed in manual focus mode. Options AF-S AF-C 6 The Shooting Menus 107 DEPTH-OF-FIELD SCALE Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays. Options PIXEL BASIS FILM FORMAT BASIS RELEASE/FOCUS PRIORITY Choose how the camera focuses in focus mode AF-S or AF-C. Option RELEASE FOCUS 6 The Shooting Menus 108 Description Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus. Focus is prioritized over shutter response. Pictures can be only taken when the camera is in focus. AF/MF SETTING TOUCH SCREEN MODE Choose the focus operations performed using touch controls. Still Photography Mode Description • In focus mode S (AF-S), the camera focuses when you tap your AF AF OFF subject in the display. Focus locks at the current distance until you tap the AF OFF icon. • In focus mode C (AF-C), the camera initiates focus when you tap your subject in the display. The camera will continue to adjust focus for changes in the distance to the subject until you tap the AF OFF icon. • In manual focus mode (MF), you can tap the display to focus on the selected subject using autofocus. AREA Tap to select a point for focus or zoom. The focus frame will move to the selected point. OFF Touch focus disabled. 6 Mode OFF Description Touch controls disabled. N To disable touch controls and hide the touch screen mode indicator, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF. 109 The Shooting Menus Movie Recording AF/MF SETTING Touch Controls for Focus Zoom Different touch controls are used during focus zoom (focus check enabled). Central Area Tapping the center of the display performs the operations below. Mode AF AREA OFF AF-S AF MF Instant AF OFF Other Areas Tapping other areas simply scrolls the display. 6 The Shooting Menus 110 A SHOOTING SETTING Adjust shooting options. To display shooting options, press MENU/OK in the shooting display and select the A (SHOOTING SETTING) tab. SHOOTING SETTING SELF-TIMER SAVE SELF-TIMER SETTING INTERVAL TIMER SHOOTING AE BKT SETTING FILM SIMULATION BKT FOCUS BKT PHOTOMETRY SHUTTER TYPE EXIT N The options available vary with the shooting mode selected. SELF-TIMER Choose a shutter release delay. Option If an option other than OFF is selected, the timer will start when the shutter button is pressed all the way down. The display shows the number of seconds remaining until the shutter is released. To stop the timer before the picture is taken, press DISP/BACK. 9 O Stand behind the camera when using the shutter button. Standing in front of the lens can interfere with focus and exposure. 111 6 The Shooting Menus Description The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera moving when the shutter R 2 SEC button is pressed. The self-timer lamp blinks as the timer counts down. The shutter is released ten seconds after the shutter button is pressed. S 10 SEC Use for photographs in which you wish to appear yourself. The self-timer lamp blinks immediately before the picture is taken. OFF Self-timer off. SAVE SELF-TIMER SETTING If ON is selected, the chosen self-timer setting will remain in effect after a picture is taken or the camera is turned off. Options ON OFF INTERVAL TIMER SHOOTING Configure the camera to take photos automatically at a preset interval. 1 Highlight INTERVAL TIMER SHOOTING in the A (SHOOTING SETTING) tab and press MENU/OK. 2 Use the focus stick (focus lever) to choose the interval and number of shots. Press MENU/OK to proceed. INTERVAL/NUMBER OF TIMES INTERVAL NUMBER OF TIMES END 6 CANCEL START WAITING TIME LATER The Shooting Menus ESTIMATED START TIME 11 : 00 PM START 3 Use the focus stick to choose the starting time and then press MENU/OK. Shooting will start automatically. CANCEL 112 CANCEL SHOOTING SETTING O Interval timer photography cannot be used with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. N • Use of a tripod is recommended. • Check the battery level before starting. We recommend using an optional AC-15V AC power adapter. • The display turns off between shots and lights a few seconds before the next shot is taken. • The display can be activated at any time by pressing the shutter button. • To continue shooting until the memory card is full, set the number of shots to ∞. 6 The Shooting Menus 113 AE BKT SETTING Adjust exposure bracketing settings. Option Description Choose the number of shots in the bracketing sequence and the amount exposure is varied with each shot. FRAMES: Choose the number of shots in the bracketing • FRAMES/STEP SETTING sequence. • STEP: Choose the amount exposure is varied with each shot. • 1 FRAME: The shots in the bracketing sequence are taken one at a time. 1 FRAME/CONTINUOUS • CONTINUOUS: The shots in the bracketing sequence are taken in a single burst. SEQUENCE SETTING Choose the order in which the shots are taken. FILM SIMULATION BKT Choose the three film simulation types used for film simulation bracketing (P 90). 6 The Shooting Menus c PROVIA/STANDARD i CLASSIC CHROME a ACROS * Options d Velvia/VIVID g PRO Neg. Hi b MONOCHROME * * Available with yellow (Ye), red (R), and green (G) filters. 114 e ASTIA/SOFT h PRO Neg. Std f SEPIA SHOOTING SETTING FOCUS BKT Adjust focus bracketing settings. Option FRAMES STEP INTERVAL Description Choose the number of shots. Choose the amount focus changes with each shot. Choose the interval between shots. N Do not adjust zoom during shooting. Focus and FRAMES/STEP The relation between focus and the options chosen for FRAMES and STEP is shown in the illustration. : Frames 1 2 Step 3 4 5 6 Starting focus position changes. • Regardless of the option chosen for FRAMES, shooting ends when focus reaches infinity. 115 The Shooting Menus • Focus proceeds from the starting position toward infinity. • Small STEP values translate to small changes in focus, larger values to larger PHOTOMETRY Choose how the camera meters exposure. O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE OFF/EYE OFF. Mode Description The camera instantly determines exposure based on an analo ysis of composition, color, and brightness distribution. RecMULTI ommended in most situations. The camera meters the entire frame but assigns the greatest p CENTER WEIGHTED weight to the area at the center. The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total. Recommended v with backlit subjects and in other cases in which the backSPOT ground is much brighter or darker than the main subject. Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same w lighting, and is particularly effective for landscapes and porAVERAGE traits of subjects dressed in black or white. 6 The Shooting Menus 116 SHOOTING SETTING SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound. Option t MECHANICAL SHUTTER s ELECTRONIC SHUTTER t E-FRONT CURTAIN SHUTTER u MECHANICAL + ELECTRONIC Description Take pictures with the mechanical shutter. Take pictures with the electronic shutter. The camera chooses the mechanical or electronic front curtain shutter according to shooting conditions. The camera chooses the mechanical or electronic shutter according to shooting conditions. The camera chooses the mechanical, electronic, or r E-FRONT + ELECTRONIC electronic front curtain shutter according to shooting conditions. If s ELECTRONIC SHUTTER, u MECHANICAL + ELECTRONIC, or r E-FRONT + ELECTRONIC is selected, shutter speeds faster than ¼000 s can be chosen by rotating the shutter speed dial to 4000 and then rotating the rear command dial. The mechanical shutter will still be used at high shutter speeds when t E-FRONT CURTAIN SHUTTER is selected. • When using the electronic front-curtain shutter, note the following: - Faster shutter speeds are more likely to result in uneven exposure and loss of resolution in out-of-focus areas of the frame. N The following restrictions apply when the electronic shutter is used: • Sensitivity is restricted to values of ISO 12800–100. • Long exposure noise reduction has no effect. • The flash can not be used. 117 6 The Shooting Menus O • When using the electronic shutter, note the following: - Distortion may be visible in shots of moving subjects. - Distortion may also be visible in hand-held shots taken at high shutter speeds; use of a tripod is recommended. - Banding and fog may occur in shots taken under fluorescent lights or other flickering or erratic illumination. - When taking pictures with the shutter muted (P 161), respect your subjects’ image rights and right to privacy. FLICKER REDUCTION Select ON to reduce flicker in pictures and the display when shooting under fluorescent lighting and other similar light sources. Options ON OFF O • Enabling flicker reduction disables the electronic shutter and increases the time needed to record pictures. • Flicker reduction is not available during movie recording. IS MODE Reduce blur. Option l CONTINUOUS Description Image stabilization on. Image stabilization enabled only when the shutter button m SHOOTING ONLY is pressed halfway (focus mode C) or the shutter is released. Image stabilization off ; x appears in the display. RecOFF ommended when the camera is on a tripod. 6 N This option is available only with lenses that support image stabilization. The Shooting Menus 118 SHOOTING SETTING ISO Adjust the camera’s sensitivity to light. Option Description Sensitivity is automatically adjusted in response to shooting AUTO1 conditions according to combination of standard and maxAUTO2 imum sensitivity and minimum shutter speed chosen for AUTO3 A SHOOTING SETTING > ISO. Choose from AUTO1, AUTO2, and AUTO3 (P 120). Adjust sensitivity manually. Selected value is shown in display. 12800–100 H (102400/51200/25600), Choose for special situations. Note that mottling may apL (50) pear in pictures taken at H, while L reduces dynamic range. N • The Fn1 button can be assigned other roles using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. The role described above can also be assigned to other function buttons (P 198). • Sensitivity is not reset when the camera is turned off. • If desired, you can use D BUTTON/DIAL SETTING > COMMAND DIAL SETTING to configure the camera so that ISO sensitivity can be adjusted using the front or rear command dial. 119 6 The Shooting Menus Adjusting Sensitivity High values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities. AUTO Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3. Item DEFAULT SENSITIVITY MAX. SENSITIVITY MIN. SHUTTER SPEED Options 12800–100 12800–200 ⁄–¼ SEC AUTO1 800 Default AUTO2 100 1600 ⁄ SEC AUTO3 3200 The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for MIN. SHUTTER SPEED. N • If the value selected for DEFAULT SENSITIVITY is higher than that 6 selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY. • The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY. The Shooting Menus 120 SHOOTING SETTING MOUNT ADAPTER SETTING Adjust settings for lenses attached via a mount adapter. Shutter Select When using lenses with an internal shutter, choose whether to use the shutter on the camera (BODY) or the lens (LENS). O This option may have no effect with some lenses. Saved Settings Store settings for up to 6 lenses, or choose OFF to disable corrections for focal length, distortion, color shading, and peripheral illumination. Choosing a Focal Length Use the focus stick (focus lever) to enter the focal length. LENS 5 INPUT FOCAL LENGTH 6 SET The Shooting Menus Distortion Correction Choose from STRONG, MEDIUM, or WEAK options to correct BARREL or PINCUSHION distortion. CANCEL LENS5 DISTORTION CORRECTION BARREL STRONG BARREL MEDIUM BARREL WEAK OFF PINCUSHION WEAK PINCUSHION MEDIUM PINCUSHION STRONG 121 Color Shading Correction Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. To use color shading correction, follow the steps below. NEXT SET 1 Rotate the rear command dial to choose a corner. The selected corner is indicated by a triangle. 2 Use the focus stick (focus lever) to adjust shading until there is no visible difference in color between the selected corner and the center of the image. • Press the focus stick left or right to adjust colors on the cyan–red axis. • Press the focus stick up or down to adjust colors on the blue–yellow axis. N To determine the amount required, adjust color shading correction 6 while taking photos of blue sky or a sheet of gray paper. The Shooting Menus Peripheral Illumination Correction Choose from values between –5 and +5. Choosing positive values increases peripheral illumination, while choosing negative values reduces peripheral illumination. Positive values are recommended for vintage lenses, negative values to create the effect of images taken with an antique lens or a pinhole camera. SET CANCEL N To determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a sheet of gray paper. 122 SHOOTING SETTING 35mm FORMAT MODE Enabling A SHOOTING SETTING > 35mm FORMAT MODE in the shooting menu sets the picture angle to 35 mm; the change is reflected in the display. Option ON OFF AUTO Description The picture angle is set to 35 mm; the change is reflected in the display. 35 mm format mode disabled. 35 mm format mode is enabled automatically when a mount adapter that supports automatic detection is attached. N • The D SCREEN SET-UP > DISP. CUSTOM SETTING item in the setup menu (P 18, 168) includes an option (enabled by default) for displaying a 35mm FORMAT MODE icon. • The H IMAGE QUALITY SETTING > IMAGE SIZE item in the shooting menu is fixed at O 3 : 2. N For downloads and other information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ 123 6 The Shooting Menus WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera F FLASH SETTING Adjust flash-related settings. To display flash-related settings, press MENU/OK in the shooting display and select the F (FLASH SETTING) tab. N The options available vary with the shooting mode selected. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING EXIT FLASH FUNCTION SETTING Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash. MODE SHOE MOUNT FLASH N For more information on flash settings, see “External Flash Units” (P 207) in “Peripherals and Optional Accessories”. 6 ADJUST END The Shooting Menus RED EYE REMOVAL Remove red-eye effects caused by the flash. Option Description A red-eye reduction pre-flash is combined with digital red-eye FLASH+REMOVAL removal. FLASH Flash red-eye reduction only. REMOVAL Digital red-eye removal only. OFF Flash red-eye reduction and digital red-eye removal off. N • Flash red-eye reduction can be used in TTL flash control mode. • Digital red-eye removal is performed only when a face is detected. • Digital red-eye removal is not available with RAW images. 124 FLASH SETTING TTL-LOCK MODE Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs. Option Description Flash output is locked at the value metered for the most LOCK WITH LAST FLASH recent photo. LOCK WITH METERING The camera emits a series of pre-flashes and locks flash FLASH output at the metered value. N • To use TTL lock, assign TTL-LOCK to a camera control and then use the control to enable or disable TTL lock (P 198). • Flash compensation can be adjusted while TTL lock is in effect. • Selecting LOCK WITH LAST FLASH displays an error message if no previously metered value exists. LED LIGHT SETTING Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos. Role of LED video light in still photography Catchlight AF-assist illuminator AF-assist illuminator and catchlight None N In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu. 125 6 The Shooting Menus Option CATCHLIGHT AF ASSIST AF ASSIST+CATCHLIGHT OFF FLASH SETTING MASTER SETTING Choose a flash group (A, B, or C) for the flash mounted on the camera hot shoe when it functions as a master flash controlling remote flash units via Fujifilm wireless optical flash control, or choose OFF to limit master flash output to a level that does not affect the final picture. Options Gr A Gr B Gr C OFF N In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu. CH SETTING Choose the channel used for communication between the master flash and remote flash units when using Fujifilm optical wireless flash control. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. 6 Options The Shooting Menus CH1 126 CH2 CH3 CH4 B MOVIE SETTING Adjust movie-recording options. To display options for movie recording, press MENU/OK in the shooting display and select the B (MOVIE SETTING) tab. N The options available vary with the shooting mode selected. MOVIE SETTING MOVIE MODE MOVIE AF MODE HDMI OUTPUT INFO DISPLAY HDMI REC CONTROL MIC LEVEL ADJUSTMENT MIC/REMOTE RELEASE EXIT MOVIE MODE Choose a frame size and rate for movie recording. Frame size Rate 29.97 fps 25 fps 24 fps 23.98 fps 29.97 fps 25 fps 24 fps 23.98 fps 1920 × 1080 (Full HD) 1280 × 720 (HD) 6 MOVIE AF MODE Choose how the camera selects the focus point for movie recording. Option MULTI AREA Description Automatic focus-point selection. The camera focuses on the subject in the selected focus area. HDMI OUTPUT INFO DISPLAY If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display. Options ON OFF 127 The Shooting Menus Option i 1080/29.97P i 1080/25P i 1080/24P i 1080/23.98P h 720/29.97P h 720/25P h 720/24P h 720/23.98P MOVIE SETTING HDMI REC CONTROL Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording. Options ON OFF MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in and external microphones. MIC LEVEL ADJUSTMENT SET Option 20—1 OFF 6 CANCEL Description Choose a recording level. Disable the microphone. N • The display shows the peak recording level detected in a given period. The Shooting Menus • You can assign MIC LEVEL ADJUSTMENT to a camera control and then using the control to adjust the microphone level during recording. MIC/REMOTE RELEASE Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release. Options m MIC 128 n REMOTE Playback and the Playback Menu 129 The Playback Display This section lists the indicators that may be displayed during playback. O For illustrative purposes, displays are shown with all indicators lit. A B C D E F G 01/01/2018 10:00 AM b Playback and the Playback Menu a H Z I Y J X K W V 7 U T S A Date and time ................................. 39, 41, 157 B Bluetooth ON/OFF .......................................185 C Image transfer order....................................147 D Image transfer status .........................185, 220 E Number of frames selected for upload ...147 F Card slot ..........................................................135 G Frame number ..............................................182 H Protected image ...........................................142 I Location data ................................................220 J Red-eye removal indicator ...............124, 144 K Face detection indicator.............................104 L Battery level ..................................................... 38 M Image quality .................................................. 89 N Image size......................................................... 88 130 R Q P O N ML O Film simulation ............................................... 90 P Dynamic range ............................................... 92 Q White balance ................................................. 93 R Sensitivity.......................................................... 76 S Exposure compensation .............................. 79 T Aperture ...............................................57, 61, 62 U Shutter speed......................................57, 58, 62 V Playback mode indicator............................. 47 W Movie icon ........................................................ 53 X Gift image......................................................... 47 Y Photobook assist indicator........................149 Z DPOF print indicator ...................................151 a Voice memo ...................................................145 b Rating ..............................................................131 The Playback Display The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback. Standard Information off Playback and the Playback Menu 01/01/2018 10:00 AM 1/1000 5.6 12800 +1.0 7 FAVORITES Favorites Info display The Info Display In the info display, you can press the focus stick (focus lever) up to cycle through a series of information and histogram displays. Favorites: Rating Pictures To rate the current picture, press DISP/BACK and press the focus stick (focus lever) up and down to select from zero to five stars. 131 The Playback Display Viewing Photo Information The photo information display changes each time the focus stick (focus lever) is pressed up. Basic data Histogram Playback and the Playback Menu NEXT 01/01/2018 10:00 AM 1/1000 S.S 1/1000 F 5.6 ISO 12800 5.6 12800 +1.0 BACK 7 Info display 2 +1.0 NEXT Info display 1 Zooming in on the Focus Point Press the center of the rear command dial to zoom in on the focus point. Press again to return to full-frame playback. 132 Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Use the rear command dial to go from full-frame playback to playback zoom or multi-frame playback. 100-0001 Playback zoom Multi-frame playback DISP/BACK MENU/OK Nine-frame view Medium zoom Playback and the Playback Menu Full-frame playback 7 Hundred- frame view Maximum zoom 133 Viewing Pictures Playback Zoom Rotate the rear command dial right to zoom in on the current picture, left to zoom out. To exit zoom, press DISP/BACK, MENU/OK, or the center of the rear command dial. N • The maximum zoom ratio varies with the option selected for H IMAGE QUALITY SETTING > IMAGE SIZE. • Playback zoom is not available with cropped or resized copies saved at a size of a. Playback and the Playback Menu 7 Scroll When the picture is zoomed in, the focus stick (focus lever) can be used to view areas of the image not currently visible in the display. Navigation window Multi-Frame Playback To change the number of images displayed, rotate the rear command dial left when a picture is displayed full frame. N Use the focus stick (focus lever) to highlight images and press MENU/OK to view the highlighted image full frame. In the nine- and hundred-frame displays, press the focus stick up or down to view more pictures. 134 C The Playback Menu Adjust playback settings. The playback menu is displayed when you press MENU/OK in playback mode. PLAY BACK MENU SWITCH SLOT RAW CONVERSION ERASE SIMULTANEOUS DELETE(RAW SLOT1/JPG SLOT2) CROP RESIZE PROTECT IMAGE ROTATE EXIT N If two memory cards are inserted, you can press and hold the a button to choose a card for playback. Playback and the Playback Menu SWITCH SLOT Choose the card from which images will be played back. 7 135 RAW CONVERSION Even if you don’t have a computer, you can use the camera to modify RAW pictures and save them in JPEG or TIFF format. Saving RAW Pictures in Another Format 1 2 3 Display a RAW picture. Highlight RAW CONVERSION in the playback menu. Press MENU/OK. A list of settings will be displayed. RAW CONVERSION Playback and the Playback Menu REFLECT SHOOTING COND. FILE TYPE IMAGE SIZE IMAGE QUALITY PUSH/PULL PROCESSING DYNAMIC RANGE CREATE 4 5 CANCEL Press the focus stick (focus lever) up or down to highlight a setting. Press the focus stick right to display RAW CONVERSION 撮影時条件を反映 options. 100% 増感/減感 200% ダイナミックレンジ 400% フィルムシミュレーションホワイトバランス WBシフト 7 6 7 Press the focus stick up or down to highlight the desired option. 8 Press the Q button. A preview of the JPEG or TIFF copy will be displayed. 9 Press MENU/OK. The JPEG or TIFF copy will be saved. Press MENU/OK to select the highlighted option. The settings list shown in Step 3 will be displayed. Repeat Steps 4 to 7 to adjust additional settings. N RAW conversion options can also be displayed by pressing the Q button when a RAW pictures is displayed during playback. 136 The Playback Menu The settings that can be adjusted when converting pictures from RAW to another format are: Setting 137 Playback and the Playback Menu Description Create a copy using the settings in effect at the time REFLECT SHOOTING COND. the photo was taken. FILE TYPE Choose a file format. IMAGE SIZE Choose an image size. IMAGE QUALITY Adjust image quality. PUSH/PULL PROCESSING Adjust exposure. DYNAMIC RANGE Enhance details in highlights for natural contrast. FILM SIMULATION Simulate the effects of different types of film. GRAIN EFFECT Add a film grain effect. COLOR CHROME EFFECT Deepen colors in shadows. WHITE BALANCE Adjust white balance. WB SHIFT Fine-tune white balance. HIGHLIGHT TONE Adjust highlights. SHADOW TONE Adjust shadows. COLOR Adjust color density. SHARPNESS Sharpen or soften outlines. NOISE REDUCTION Process the copy to reduce mottling. Improve definition by adjusting for diffraction and LENS MODULATION OPTIMIZER the slight loss of focus at the periphery of the lens. COLOR SPACE Choose the color space used for color reproduction. 7 ERASE Delete individual pictures, multiple selected pictures, or all pictures. O Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. Option FRAME SELECTED FRAMES ALL FRAMES Description Delete pictures one at a time. Delete multiple selected pictures. Delete all unprotected pictures. Playback and the Playback Menu FRAME 1 Select FRAME for ERASE in the playback menu. 2 Press the focus stick (focus lever) left or right to scroll through pictures and press MENU/OK to delete. N • A confirmation dialog is not displayed before pictures are deleted; be sure the correct picture is selected before pressing MENU/OK. • Additional pictures can be deleted by pressing MENU/OK. Press the focus stick left or right to scroll through pictures and press MENU/OK to delete. 7 138 The Playback Menu SELECTED FRAMES 1 Select SELECTED FRAMES for ERASE in the playback menu. Highlight pictures and press MENU/OK to select. • Selected pictures are indicated by check marks (R). • To deselect a highlighted picture, press MENU/OK again. 3 When the operation is complete, press DISP/BACK to display a confirmation dialog. 4 Highlight OK and press MENU/OK to delete the selected pictures. N Pictures in photobooks or printer orders are shown by S. ALL FRAMES 1 Select ALL FRAMES for ERASE in the playback menu. 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures. N • Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed cannot be recovered. • If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures. 139 Playback and the Playback Menu 2 7 SIMULTANEOUS DELETE(RAW SLOT1/JPG SLOT2) Taking photos with RAW / JPEG selected for D SAVE DATA SET-UP > CARD SLOT SETTING (STILL IMAGE) creates two copies. Choose whether deleting the RAW image will also delete the JPEG copy. Option ON OFF Playback and the Playback Menu 7 Description Deleting the RAW image from the card in Slot 1 also deletes the JPEG copy from the card in Slot 2. Deleting the RAW image from the card in Slot 1 does not delete the JPEG copy from the card in Slot 2. CROP Create a cropped copy of the current picture. 1 2 3 Display the desired picture. 4 5 Press MENU/OK to display a confirmation dialog. Select CROP in the playback menu. Use the rear command dial to zoom in and out and press the focus stick (focus lever) up, down, left, or right to scroll the picture until the desired portion is displayed. Press MENU/OK again to save the cropped copy to a separate file. N • The higher the zoom ratio, the smaller the number of pixels in the cropped copy. • If the size of the final copy will be a, YES will be displayed in yellow. • All copies have an aspect ratio of 3∶2. 140 The Playback Menu RESIZE Create a small copy of the current picture. 1 2 3 Display the desired picture. 4 Press MENU/OK again to save the resized copy to a separate file. Select RESIZE in the playback menu. Highlight a size and press MENU/OK to display a confirmation dialog. Playback and the Playback Menu N The sizes available vary with the size of the original image. 7 141 PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. Option FRAME SET ALL RESET ALL Description Protect selected pictures. Press the focus stick (focus lever) left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete. Protect all pictures. Remove protection from all pictures. Playback and the Playback Menu O Protected pictures will be deleted when the memory card is formatted. N Protecting images currently selected for upload to paired smartphones or tablets removes upload marking. 7 142 The Playback Menu IMAGE ROTATE Rotate pictures. 1 2 3 Display the desired picture. 4 Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera. Select IMAGE ROTATE in the playback menu. Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise. tating pictures. • The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated when viewed on a computer or on other cameras. • Pictures taken with D SCREEN SET-UP > AUTOROTATE PB are automatically displayed in the correct orientation during playback. Playback and the Playback Menu N • Protected pictures cannot be rotated. Remove protection before ro- 7 143 RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. 1 2 3 Display the desired picture. Select RED EYE REMOVAL in the playback menu. Press MENU/OK. N • Results vary depending on the scene and the camera’s success in dePlayback and the Playback Menu tecting faces. • The amount of time needed to process the image varies with the number of faces detected. • Red eye cannot be removed from pictures that have already been processed using red-eye removal, which are indicated by a e icon during playback. • Red eye removal cannot be performed on RAW images. 7 144 The Playback Menu VOICE MEMO SETTING Add a voice memo to the current photograph. 1 2 3 Select ON for VOICE MEMO SETTING in the playback menu. Display a photo to which you wish to add a voice memo. Press and hold the Fn2 button to record the memo. Recording ends after 30 s or when you release the button. N • The new memo will be recorded over any existing memos. Playing Voice Memos Pictures with voice memos are indicated by q icons during playback. • To play a memo, select the picture and press the Fn2 button. • A progress bar will be displayed while the memo plays back. • Volume can be adjusted by pressing MENU/OK to pause playback and then pressing the focus stick (focus lever) up or down to adjust the volume. Press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME. Playback and the Playback Menu • Voice memos cannot be added to protected pictures. • Deleting the picture also deletes the memo. 7 145 COPY Copy pictures between the cards in the first and second slots. 1 2 Select COPY in the playback menu. Highlight one of the following options. Option Description Copy pictures from the card in the first slot to the card in SLOT1 y SLOT2 the second slot. Copy pictures from the card in the second slot to the card SLOT2 y SLOT1 in the first slot. Playback and the Playback Menu 3 4 Press the focus stick (focus lever) right. Highlight one of the following options and press MENU/OK. Option FRAME ALL FRAMES Description Copy selected pictures. Press the focus stick left or right to view pictures and press MENU/OK to copy the current picture. Copy all pictures. O Copying ends when the destination is full. 7 146 The Playback Menu IMAGE TRANSFER ORDER Select photos for upload to a paired smartphone or tablet. 1 Select IMAGE TRANSFER ORDER > SELECT FRAMES in the playback menu. 2 Highlight photos and press MENU/OK to select or deselect. Repeat until all the desired photos have been selected. 3 Press DISP/BACK to exit to playback. N If ON is selected for both D CONNECTION SETTING > Bluetooth N • Image transfer orders can contain a maximum of 999 pictures. • The following cannot be selected for upload: - Protected pictures - Movies - RAW images - “Gift” pictures (pictures taken with other cameras) • If PAIRING/TRANSFER ORDER is selected for D CONNECTION SETTING > GENERAL SETTINGS > r BUTTON SETTING, photos can also be marked for upload using the Fn1 button. • To remove upload marking from all pictures in the current order, select IMAGE TRANSFER ORDER > RESET ORDER. • If ON is selected for D CONNECTION SETTING > Bluetooth SETTINGS > AUTO IMAGE TRANSFER, photos will automatically be marked for upload as they are taken. 147 Playback and the Playback Menu SETTINGS > Bluetooth ON/OFF and AUTO IMAGE TRANSFER, upload will begin shortly after you exit to playback or turn the camera off. 7 WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera N For downloads and other information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ Playback and the Playback Menu 7 148 The Playback Menu PHOTOBOOK ASSIST Create books from your favorite photos. Creating a Photobook 1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST. 2 Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press MENU/OK to exit when the book is complete. for photobooks. • The first picture selected becomes the cover image. Press the focus stick down to select the current image for the cover instead. 3 Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new book will be added to the list in the photobook assist menu. N • Books can contain up to 300 pictures. • Books that contain no photos are automatically deleted. Photobooks Photobooks can be copied to a computer using MyFinePix Studio software. 149 Playback and the Playback Menu N • Neither photographs a or smaller nor movies can be selected 7 Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures. Playback and the Playback Menu Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the onscreen instructions. • EDIT: Edit the book as described in “Creating a Photobook”. • ERASE: Delete the book. 7 150 The Playback Menu PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. 1 2 Select C PLAY BACK MENU > PRINT ORDER (DPOF). 3 Display a picture you wish to include in or remove from the print order. 4 Press the focus stick (focus lever) up or down to choose the number of copies (up to 99). Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding. press the focus stick down until the number of copies is 0. 01 SHEETS FRAME SET Total number of prints Number of copies N Repeat steps 3–4 to complete the print order. 5 Playback and the Playback Menu N To remove a picture from the order, PRINT ORDER (DPOF) DPOF: 00001 7 The total number of prints is displayed in the monitor. Press MENU/OK to exit. N • The pictures in the current print order are indicated by a u icon during playback. • Print orders can contain a maximum of 999 pictures. • If a memory card is inserted containing a print order created by another camera, you will need to delete the order before creating as described above. 151 instax PRINTER PRINT To print pictures to optional Fujifilm instax SHARE printers, first select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password, then follow the steps below. 1 2 Playback and the Playback Menu 7 Turn the printer on. Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING FUJIFILM-CAMERA-1234 CANCEL 3 Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start. PRINTER PRINT 100-0020 SET instax-12345678 CANCEL N • Pictures taken with other cameras cannot be printed. • The area printed is smaller than the area visible in the LCD monitor. • The displays may vary depending on the printer connected. 152 The Playback Menu DISP ASPECT Choose how High Definition (HD) devices display pictures with an aspect ratio of 4∶3 (this option is available only when an HDMI cable is connected). 16:9 4:3 16∶∶9 16 Option 4∶3 N Select 16∶9 to display the image so that it fills the screen with its top and bottom cropped out, 4∶3 to display the entire image with black bands at either side. Playback and the Playback Menu Display 7 153 MEMO 154 The Setup Menus 155 D USER SETTING Adjust basic camera settings. To access basic camera settings, press MENU/OK, select the D (SET UP) tab, and choose USER SETTING. USER SETTING FORMAT DATE/TIME TIME DIFFERENCE MY MENU SETTING SENSOR CLEANING BATTERY AGE RESET EXIT FORMAT To format a memory card: The Setup Menus 8 1 2 Select D USER SETTING > FORMAT in the D (SET UP) tab. 3 A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK. Highlight the slot containing the card you wish to format and press MENU/OK. N To exit without formatting the memory card, select CANCEL or press DISP/BACK. FORMAT FORMAT CARD IN SLOT 1, OK? ERASE ALL DATA OK CANCEL O • All data—including protected pictures—will be deleted from the memory card. Be sure important files have been copied to a computer or other storage device. • Do not open the battery-chamber cover during formatting. N The format menu can also be displayed by pressing the center of the rear command dial while pressing and holding the b button. 156 USER SETTING DATE/TIME To set the camera clock: 1 2 Select D USER SETTING > DATE/TIME in the D (SET UP) tab. 3 Press MENU/OK to set the clock. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the focus stick up or down. TIME DIFFERENCE Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between your local and home time zone: Highlight g LOCAL and press MENU/OK. Use the focus stick (focus lever) to choose the time difference between local time and your home time zone. Press MENU/OK when settings are complete. To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time zone, select h HOME. Options g LOCAL h HOME N If g LOCAL is selected, g will be displayed in yellow for about three seconds when the camera is turned on. 157 The Setup Menus 1 2 8 Qa Choose a language. MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used options. 1 Highlight D USER SETTING > MY MENU SETTING in the D (SET UP) tab and press MENU/OK. MY MENU SETTING ADD ITEMS RANK ITEMS REMOVE ITEMS N To reorder items, select RANK ITEMS. To delete items, select REMOVE ITEMS. 2 The Setup Menus 8 Press the focus stick (focus lever) up or down to highlight ADD ITEMS and press MENU/OK. Options that can be added to “my menu” are highlighted in blue. MY MENU SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT COLOR CHROME EFFECT DYNAMIC RANGE WHITE BALANCE OK N 3 SELECT Choose a position for the item and press MENU/OK. The item will be added to “my menu”. SELECT ITEM LOCATION 1 IMAGE SIZE 2 IMAGE QUALITY MOVE 4 5 CANCEL Items currently in “my menu” are indicated by check marks. SAVE Press MENU/OK to return to the edit display. Repeat Steps 3 and 4 until all the desired items have been added. N “My menu” can contain up to 16 items. 158 USER SETTING SENSOR CLEANING Remove dust from the camera image sensor. Option OK Description Clean the sensor immediately. Sensor cleaning will be performed when the camera is WHEN SWITCHED ON turned on. Sensor cleaning will be performed when the camera turns WHEN SWITCHED OFF off (sensor cleaning is not however performed if the camera turns off in playback mode). N Dust that cannot be removed using sensor cleaning can be removed manually (P 246). BATTERY AGE Check battery age. Age is expressed as a number between 0 and 4. BATTERY AGE The Setup Menus RESET Reset shooting or setup menu options to default values. 1 8 Highlight the desired option and press MENU/OK. Option Description Reset all shooting menu settings other than custom white balance and custom settings banks created SHOOTING MENU RESET using EDIT/SAVE CUSTOM SETTING to default values. Reset all setup menu settings other than DATE/ SET-UP RESET TIME, TIME DIFFERENCE, and CONNECTION SETTING to default values. 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK. 159 D SOUND SETTING Make changes to camera sounds. To access sound settings, press MENU/OK, select the D (SET UP) tab, and choose SOUND SET-UP. SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME EXIT AF BEEP VOL. Choose the volume of the beep that sounds when the camera focuses. The beep can be muted by selecting eOFF. Options b (high) The Setup Menus 8 c (medium) d (low) eOFF (mute) SELF-TIMER BEEP VOL. Choose the volume of the beep that sounds while the self-timer is active. The beep can be muted by selecting eOFF. Options b (high) c (medium) d (low) eOFF (mute) OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF to disable control sounds. Options b (high) 160 c (medium) d (low) eOFF (mute) SOUND SETTING SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose eOFF to disable the shutter sound. Options b (high) c (medium) d (low) eOFF (mute) SHUTTER SOUND Choose the sound made by the electronic shutter. Options j SOUND 2 i SOUND 1 k SOUND 3 PLAYBACK VOLUME Adjust the volume for movie playback. 10 9 8 7 6 Options 5 4 3 2 1 0 The Setup Menus 8 161 D SCREEN SETTING Make changes to display settings. To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SET-UP. SCREEN SETTING EVF BRIGHTNESS EVF COLOR EVF COLOR ADJUSTMENT LCD BRIGHTNESS LCD COLOR LCD COLOR ADJUSTMENT IMAGE DISP. AUTOROTATE DISPLAYS EXIT EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfinder. Option AUTO MANUAL The Setup Menus 8 Description Automatic brightness adjustment. Adjust brightness manually; choose from options between +5 and −7. EVF COLOR Adjust the hue of the display in the electronic viewfinder. +5 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 EVF COLOR ADJUSTMENT Adjust the color of the display in the electronic viewfinder. 1 Adjust colors using the focus stick (focus lever). EVF COLOR ADJUSTMENT 5 SET 2 Press MENU/OK. 162 CANCEL −5 SCREEN SETTING LCD BRIGHTNESS Adjust monitor brightness. +5 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 −5 +1 Options 0 −1 −2 −3 −4 −5 LCD COLOR Adjust monitor hue. +5 +4 +3 +2 LCD COLOR ADJUSTMENT Adjust the color of the display in the LCD monitor. 1 2 Adjust colors using the focus stick (focus lever). Press MENU/OK. The Setup Menus 8 163 IMAGE DISP. Choose how long images are displayed after shooting. Option CONTINUOUS 1.5 SEC 0.5 SEC OFF Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom. Pictures are displayed for the selected time or until the shutter button is pressed halfway. Pictures are not displayed after shooting. N • Colors may differ slightly from those in the final image. • “Noise” mottling may be visible at high sensitivities. AUTOROTATE DISPLAYS Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation. The Setup Menus Options ON 8 164 OFF SCREEN SETTING PREVIEW EXP./WB IN MANUAL MODE Choose whether to enable exposure and/or white balance preview in manual exposure mode. Option Description PREVIEW EXP./WB Enable exposure and white balance preview. Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during PREVIEW WB shooting, as may be the case when you use a flash with an incandescent monitoring lamp. Disable exposure and white balance preview. Choose this opOFF tion when using a flash or on other occasions on which exposure may change when the picture is taken. NATURAL LIVE VIEW Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor. ON OFF Description The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hardto-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of monochrome and sepia settings. The effects of film simulation, white balance, and other settings can be previewed in the monitor. 165 The Setup Menus Option 8 FRAMING GUIDELINE Choose a framing grid for shooting mode. Option G GRID 24 F GRID 9 Display P For “rule of thirds” composition. P H HD FRAMING P A six-by-four grid. Frame HD pictures in the crop shown by the lines at the top and bottom of the display. N • Framing guides are not shown at default settings but can be displayed using D SCREEN SET-UP > DISP. CUSTOM SETTING (P 168). framing can be customized using FUJIFILM Tether Shooting Plug-in PRO or Hyper-Utility Software HS-V5. • HD The Setup Menus 8 166 SCREEN SETTING AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options ON OFF FOCUS SCALE UNITS Choose the units used for the focus distance indicator. Options METERS FEET The Setup Menus 8 167 DISP. CUSTOM SETTING Choose the items shown in the standard indicator display. 1 In shooting mode, use the DISP/BACK button to display standard indicators. 2 Press MENU/OK and select D SCREEN SET-UP > DISP. CUSTOM SETTING in the D (SET UP) tab. 3 Highlight items and press MENU/OK to select or deselect. The Setup Menus Item FRAMING GUIDELINE ELECTRONIC LEVEL FOCUS FRAME AF DISTANCE INDICATOR MF DISTANCE INDICATOR HISTOGRAM LIVE VIEW HIGHLIGHT ALERT SHOOTING MODE APERTURE/S-SPEED/ISO INFORMATION BACKGROUND Expo. Comp. (Digit) Expo. Comp. (Scale) FOCUS MODE PHOTOMETRY SHUTTER TYPE 8 4 5 Default R R R R R R R R R R R R R R R Item FLASH CONTINUOUS MODE DUAL IS MODE TOUCH SCREEN MODE WHITE BALANCE FILM SIMULATION DYNAMIC RANGE FRAMES REMAINING IMAGE SIZE/QUALITY MOVIE MODE & REC. TIME 35mm FORMAT MODE IMAGE TRANSFER ORDER MIC LEVEL BATTERY LEVEL FRAMING OUTLINE Default R R R R R R R R R R R R R R R Press DISP/BACK to save changes. Press DISP/BACK as needed to exit the menus and return to the shooting display. 168 SCREEN SETTING LARGE INDICATORS MODE(EVF) Select ON to display large indicators in the electronic viewfinder. The indicators displayed can be selected using D SCREEN SETTING > LARGE INDICATORS DISP. SETTING. OFF O ON Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(EVF) (P 11). N If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (P 174, 198). The Setup Menus 8 169 LARGE INDICATORS MODE(LCD) Select ON to display large indicators in the LCD monitor. The indicators displayed can be selected using D SCREEN SETTING > LARGE INDICATORS DISP. SETTING. OFF O ON Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(LCD) (P 13). N If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (P 174, 198). The Setup Menus 8 170 SCREEN SETTING LARGE INDICATORS DISP. SETTING Choose the indicators displayed when ON is selected for D SCREEN SETTING > LARGE INDICATORS MODE(EVF) or LARGE INDICATORS MODE(LCD). Option A Expo. DISP. B d Scale C L1, L2, L3, L4 D R1, R2, R3, R4 LARGE INDICATORS DISP. SETTING Expo. DISP. Scale Description Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press MENU/OK. Select ON to display the exposure indicator. Choose up to four large icons for display on the left side of the screen. Choose up to four large icons for display on the right side of the screen. The Setup Menus 8 171 D BUTTON/DIAL SETTING Access options for camera controls. To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING. BUTTON/DIAL SETTING FOCUS LEVER SETTING EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING COMMAND DIAL SETTING SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS SHOOT WITHOUT CARD EXIT FOCUS LEVER SETTING Choose the functions performed by the focus stick (focus lever). Option LOCK (OFF) The Setup Menus Description The focus stick cannot be used during shooting. Press the stick to view the focus-point display and tilt the stick PUSH n TO UNLOCK to select a focus point. Tilt the stick to view the focus-point display and select a focus ON point. 8 172 BUTTON/DIAL SETTING EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu. 1 Select D BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the D (SET UP) tab. 2 The current quick menu will be displayed; use the focus stick (focus lever) to highlight the item you wish to change and press MENU/OK. 3 Highlight any of the following options and press MENU/OK to assign it to the selected position. * * * * * * * * * * * • MF ASSIST • TOUCH SCREEN MODE • SELF-TIMER • PHOTOMETRY • SHUTTER TYPE • FLICKER REDUCTION • ISO • FLASH FUNCTION SETTING • FLASH COMPENSATION • MOVIE MODE • MIC LEVEL ADJUSTMENT • EVF/LCD BRIGHTNESS • EVF/LCD COLOR • NONE * The Setup Menus • IMAGE SIZE • IMAGE QUALITY • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • DYNAMIC RANGE • WHITE BALANCE • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • NOISE REDUCTION • SELECT CUSTOM SETTING • AF MODE • FACE/EYE DETECTION SETTING 8 * Stored in custom settings bank. N • Select NONE to assign no option to the selected position. • When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE. N The quick menu can also be accessed in shooting mode by holding the Q button. 173 FUNCTION (Fn) SETTING Choose the roles played by the function buttons. The Setup Menus 8 1 Select D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING in the D (SET UP) tab. 2 3 Highlight the desired control and press MENU/OK. Highlight any of the following options and press MENU/OK to assign it to the selected control. • IMAGE SIZE • IMAGE QUALITY • RAW • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • DYNAMIC RANGE • WHITE BALANCE • SELECT CUSTOM SETTING • FOCUS AREA • FOCUS CHECK • AF MODE • RAPID AF • FACE/EYE DETECTION SETTING • DRIVE BUTTON • SELF-TIMER • AE BKT SETTING • FOCUS BKT SETTING • PHOTOMETRY • SHUTTER TYPE • FLICKER REDUCTION • ISO • 35mm FORMAT MODE 174 • WIRELESS COMMUNICATION • FLASH FUNCTION SETTING • TTL-LOCK • MODELING FLASH • MIC LEVEL ADJUSTMENT • PREVIEW DEPTH OF FIELD • PREVIEW EXP./WB IN MANUAL MODE • NATURAL LIVE VIEW • HISTOGRAM • ELECTRONIC LEVEL • LARGE INDICATORS MODE • FRONT COMMAND DIAL SWITCH • AE LOCK ONLY • AF LOCK ONLY • AE/AF LOCK • AF-ON • LOCK SETTING • AUTO IMAGE TRANSFER • SELECT PAIRING DESTINATION • Bluetooth ON/OFF • PLAYBACK • NONE (control disabled) BUTTON/DIAL SETTING N • AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4). • Function button assignment options can also be accessed by holding the DISP/BACK button. AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway. MODELING FLASH If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash). The Setup Menus TTL-LOCK If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for F FLASH SETTING > TTL-LOCK MODE (P 125). 8 175 COMMAND DIAL SETTING Choose the roles played by the command dials. Option Description Assign shutter speed (S.S. (PROGRAM SHIFT)) or apFRONT COMMAND erture (APERTURE (PROGRAM SHIFT)) 1 to FRONT DIAL 1 COMMAND DIAL 1. FRONT COMMAND Assign shutter speed (S.S. (PROGRAM SHIFT)), aperture (APERTURE (PROGRAM SHIFT)) 1, exposure compenDIAL 2 sation (EXP. COMPENSATION) 2, sensitivity (ISO), or no FRONT COMMAND role (NONE) to FRONT COMMAND DIAL 2 or FRONT DIAL 3 COMMAND DIAL 3. Assign shutter speed (S.S. (PROGRAM SHIFT)), aperture REAR COMMAND (APERTURE (PROGRAM SHIFT)) 1, exposure compensation (EXP. COMPENSATION) 2, sensitivity (ISO), or no role DIAL (NONE) to the rear command dial. 1 Aperture ring rotated to C. 2 Exposure compensation dial rotated to C. The Setup Menus 8 N • COMMAND DIAL SETTING can also be accessed by pressing and holding the Fn2 button. • You can also press the Fn2 button to cycle through settings in the order FRONT COMMAND DIAL 1, FRONT COMMAND DIAL 2, and FRONT COMMAND DIAL 3. • The Fn2 button can be assigned other roles using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. The role described above can also be assigned to other function buttons (P 198). 176 BUTTON/DIAL SETTING SHUTTER AF Choose whether the camera focuses when the shutter button is pressed halfway. Option Description AF-S • ON: Focus locks when the shutter button is pressed halfway. • OFF: No focus operation is performed when the shutter button is pressed halfway. • ON: The camera focuses while the shutter button is pressed halfAF-C way. • OFF: No focus operation is performed when the shutter button is pressed halfway. SHUTTER AE If ON is selected, exposure will lock while the shutter button is pressed halfway. Description AF-S/MF • ON: Exposure locks when the shutter button is pressed halfway. • OFF: Exposure does not lock when the shutter button is pressed AF-C • ON: Exposure locks while the shutter button is pressed halfway. • OFF: Exposure does not lock when the shutter button is pressed halfway. halfway. N Select OFF to allow the camera to adjust exposure before each shot taken in burst mode. SHOOT WITHOUT LENS Choose ON to enable the shutter release when no lens is attached. Options ON OFF 177 The Setup Menus Option 8 SHOOT WITHOUT CARD Choose whether the shutter can be released without a memory card inserted in the camera. Option ON OFF Description When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed. The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card. FOCUS RING Choose the direction in which the focus ring is rotated to increase the focus distance. Options X CW (clockwise) The Setup Menus 8 Y CCW (counterclockwise) AE/AF-LOCK MODE This option determines the behavior of the button to which exposure and/or focus lock is assigned. Option Description AE&AF ON WHEN Exposure and/or focus will lock while the button is pressed. PRESSING AE&AF ON/OFF Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again. SWITCH 178 BUTTON/DIAL SETTING TOUCH SCREEN SETTING Enable or disable touch-screen controls. Option TOUCH SCREEN ON/OFF EVF TOUCH SCREEN AREA SETTINGS Description • ON: Touch controls enabled; the LCD monitor functions as a touch screen. • OFF: Touch controls disabled; the LCD monitor cannot be used as a touch screen. Select the area of the LCD monitor used for touch controls while the viewfinder is active. • The area used for touch controls can be selected from: ⁃ 6 (all) ⁃ 1 (left half) ⁃ 0 (right half) ⁃ 3 (top left quarter) ⁃ 2 (top right quarter) ⁃ 5 (bottom left quarter) ⁃ 4 (bottom right quarter) • Choose OFF to disable touch controls while the viewfinder is active. Option Description Choose from the following: • UNLOCK: Reset lock options. ALL FUNCTION: Lock all controls in the FUNCTION LOCK SETTING • SELECTION list. • SELECTED FUNCTION: Lock only the controls selected in the FUNCTION SELECTION list. FUNCTION SELECTION Choose the controls locked when SELECTED FUNCTION is chosen for LOCK SETTING. 179 The Setup Menus LOCK Lock selected controls to prevent unintended operation. 8 D POWER MANAGEMENT Adjust power management settings. To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT. POWER MANAGEMENT AUTO POWER OFF SHOOTING STAND BY MODE AUTO POWER SAVE EXIT AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually. Options 5 MIN 2 MIN 1 MIN 30 SEC 15 SEC OFF The Setup Menus SHOOTING STAND BY MODE Choose the delay before the camera enters shooting standby mode. Option 5 MIN 2 MIN 1 MIN 30 SEC 15 SEC OFF 8 180 Description The camera will suspend all functions and enter powering-saving (standby) mode if no operations are performed for the selected period. Shooting standby mode disabled. POWER MANAGEMENT AUTO POWER SAVE If ON is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls. Options ON OFF The Setup Menus 8 181 D SAVE DATA SETTING Make changes to file management settings. To access file management settings, press MENU/OK, select the D (SET UP) tab, and choose SAVE DATA SET-UP. SAVE DATA SETTING FRAME NO. SAVE ORG IMAGE EDIT FILE NAME CARD SLOT SETTING (STILL IMAGE) SWITCH SLOT (SEQUENTIAL) MOVIE FILE DESTINATION SELECT FOLDER COPYRIGHT INFO EXIT The Setup Menus FRAME NO. Frame number New pictures are stored in image files named using a four-digit file number assigned by adding one to the last file number used. The File file number is displayed during playback as Directory number number shown. FRAME NO. controls whether file numbering is reset to 0001 when a new memory card is inserted or the current memory card is formatted. Option CONTINUOUS 8 RENEW Description Numbering continues from the last file number used or the first available file number, whichever is higher. Choose this option to reduce the number of pictures with duplicate file names. Numbering is reset to 0001 after formatting or when a new memory card is inserted. N • If the frame number reaches 999-9999, the shutter release will be disabled. Format the memory card after transferring to a computer any pictures you wish to keep. • Selecting D USER SETTING > RESET sets FRAME NO. to CONTINUOUS but does not reset the file number. • Frame numbers for pictures taken with other cameras may differ. 182 SAVE DATA SETTING SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using RED EYE REMOVAL. Options ON OFF EDIT FILE NAME Change the file name prefix. sRGB images use a four-letter prefix (default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”) preceded by an underscore. Option sRGB AdobeRGB Default prefix DSCF _DSF Sample file name ABCD0001 _ABC0001 N File name prefixes can be edited using touch controls. Option SEQUENTIAL BACKUP RAW / JPEG Description The card in the second slot is used only when the card in the first slot is full. Each picture is recorded twice, once to each card. RAW pictures will be saved to the card in the first slot and JPEG pictures to the card in the second slot. SWITCH SLOT (SEQUENTIAL) Choose the card that is recorded to first when SEQUENTIAL is selected for CARD SLOT SETTING (STILL IMAGE). The camera switches between memory card Slots 1 and 2 each time this option is selected. 183 The Setup Menus CARD SLOT SETTING (STILL IMAGE) Choose the role played by the card in the second slot. 8 SAVE DATA SETTING MOVIE FILE DESTINATION Choose the slot used to store movies. Options SLOT 1 SLOT 2 SELECT FOLDER Create folders and choose the folder used to store subsequent pictures. Option SELECT FOLDER CREATE FOLDER The Setup Menus 8 Description To choose the folder in which subsequent pictures will be stored, press the focus stick (focus lever) up or down to highlight an existing folder and press MENU/OK. Enter a five-character folder name to create a new folder in which to store subsequent pictures. The new folder will be created with the next picture you take and subsequent pictures will be stored in that folder. COPYRIGHT INFO Copyright information, in the form of Exif tags, can be added to new images as they are taken. Changes to copyright information are reflected only in images taken after the changes are made. Option Description DISP COPYRIGHT INFO View the current copyright information. ENTER AUTHOR’S INFO Enter the creator’s name. ENTER COPYRIGHT INFO Enter the name of the copyright holder. Delete the current copyright information. This change applies DELETE COPYRIGHT INFO only to images taken after this option is selected; copyright information recorded with existing images is not affected. N Copyright information can be edited using touch controls. 184 D CONNECTION SETTING Adjust settings for connection to other devices. To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING. CONNECTION SETTING Bluetooth SETTINGS NETWORK SETTING PRINTER CONNECTION SETTING PC CONNECTION MODE GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING EXIT N For more information on wireless connections, visit: http://fujifilm-dsc.com/wifi/ Bluetooth SETTINGS Adjust Bluetooth settings. Option 185 The Setup Menus Description To pair the camera with a smartphone or tablet, select this opPAIRING tion, then launch FUJIFILM Camera Remote on the smart device REGISTRATION and tap PAIRING REGISTRATION. Choose a connection from a list of devices with which the SELECT PAIRING camera has been paired using PAIRING REGISTRATION. DESTINATION Select NO CONNECTION to exit without connecting. Delete pairing information for selected devices. Choose the deDELETE PAIRING vice in the device list. The selected device will also be removed REG. from the devices listed in SELECT PAIRING DESTINATION. • ON: The camera automatically establishes a Bluetooth conBluetooth ON/OFF nection with paired devices when turned on. • OFF: The camera does not connect via Bluetooth. • ON: Mark photos for upload as they are taken. Mark JPEG AUTO IMAGE photos for upload as they are taken. TRANSFER • OFF: Photos are not marked for upload as they are taken. Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone. SMARTPHONE • LOCATION&TIME: Synchronize the time and location. SYNC. SETTING • LOCATION: Synchronize the location. • TIME: Synchronize the time. • OFF: Synchronization off. 8 N • Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images. • When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER or images are currently selected for upload using the IMAGE TRANSFER ORDER option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. IMAGE TRANSFER ORDER can also be used to select pictures for upload when AUTO IMAGE TRANSFER is off. NETWORK SETTING Adjust settings for connection to wireless networks. Option Description • SIMPLE SETUP: Connect to an access point using simple settings. WIRELESS ACCESS POINT SETTING • MANUAL SETUP: Manually adjust settings for connec- The Setup Menus tion to a wireless network. Choose the network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID). • AUTO: The IP address is assigned automatically. WIRELESS IP • MANUAL: Assign an IP address manually. Manually choose ADDRESS SETTING the IP address (IP ADDRESS), network mask (NETMASK), and gateway address (GATEWAY ADDRESS). 8 186 CONNECTION SETTING instax PRINTER CONNECTION SETTING Adjust settings for connection to optional Fujifilm instax SHARE printers. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead. PC CONNECTION MODE Adjust settings for connection to a computer. Option 187 The Setup Menus Description Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to USB CARD READER the computer. The camera functions normally when not connected. Connecting the camera to a computer via USB automatically enables tethered shooting mode. You can also use FUJIFILM USB TETHER X Acquire to save and load camera settings, allowing you to SHOOTING AUTO reconfigure the camera in an instant or share settings with other cameras of the same type. The camera functions normally when not connected. The camera functions in tethered shooting mode even when not connected to a computer. At default settings, pictures are USB TETHER not saved to the memory card, but pictures taken while the SHOOTING FIXED camera is not connected will be transferred to the computer when it is connected. Choose this option for wireless remote photography. Select a WIRELESS TETHER network using D CONNECTION SETTING > NETWORK SHOOTING FIXED SETTING. 8 Option Description Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected. USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the • USB RAW CONV./ camera’s image processing engine to rapidly convert RAW BACKUP RESTORE files to high-quality JPEG images. • BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type. O D POWER MANAGEMENT > AUTO POWER OFF settings also apply during tethered shooting. Select OFF to prevent the camera turning off automatically. N Tethered shooting is available with software such as Hyper-Utility The Setup Menus Software HS-V5 (available separately) or FUJIFILM X Acquire (available for free download from the Fujifilm website) or when the FUJIFILM Tether Shooting Plug-in PRO or Tether Shooting Plug-in (both available separately) is used with Adobe® Photoshop® Lightroom® Classic CC. 8 188 CONNECTION SETTING GENERAL SETTINGS Adjust settings for connection to wireless networks. Option Description Choose a name (NAME) to identify the camera on the wireless NAME network (the camera is assigned a unique name by default). Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; RESIZE IMAGE FOR the original is not affected. SMARTPHONE ON: Larger images are resized to H for upload. This setting • H is recommended. • OFF: Images are uploaded at their original size. Choose whether location data downloaded from a smartphone GEOTAGGING are embedded in pictures as they are taken. LOCATION INFO Display the location data last downloaded from a smartphone. INFORMATION View the camera’s MAC and Bluetooth address. The Setup Menus r BUTTON SETTING Choose the role played by function buttons assigned the WIRELESS COMMUNICATION function. • s PAIRING/TRANSFER ORDER: The buttons can be used for pairing and selecting images for transfer. • r WIRELESS COMMUNICATION: The buttons can be used for wireless connections. 8 RESET WIRELESS SETTING Restore wireless settings to their default values. 189 MEMO 190 Shortcuts 191 Shortcut Options Customize camera controls to suit your style or situation. Frequently-used options can be added to the Q menu or a custom “my” menu or assigned to an Fn (function) button for direct access: Description P The Q menu is displayed by pressing the Q button. The Q menu Use the Q menu to view or change the options se- 193 lected for frequently-used menu items. Add frequently-used options to this custom menu, “My menu” which can be viewed by pressing MENU/OK and se- 200 lecting the E (“MY MENU”) tab. Use the function buttons for direct access to selectThe function buttons 196 ed features. Shortcut Option Shortcuts 9 192 The Q (Quick Menu) Button Press Q for quick access to selected options. The Quick Menu Display At default settings, the quick menu contains the following items: SELECT CUSTOM SETTING BASE 400 SET I HIGHLIGHT TONE J SHADOW TONE K COLOR L SHARPNESS M SELF-TIMER N AF MODE O FLASH FUNCTION SETTING P EVF/LCD BRIGHTNESS Shortcuts A SELECT CUSTOM SETTING B ISO C DYNAMIC RANGE D WHITE BALANCE E NOISE REDUCTION F IMAGE SIZE G IMAGE QUALITY H FILM SIMULATION END The quick menu shows the options currently selected for items B–P, which can be changed as described on page 195. SELECT CUSTOM SETTING The H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING item (item A) shows the current custom settings bank: • q: No custom settings bank selected. • t–u: Select a bank to view the settings saved using the H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING option. • r–s: The current custom settings bank. 193 9 Viewing and Changing Settings 1 Press Q to display the quick menu during shooting. 2 3 Use the focus stick (focus lever) to highlight items and rotate the rear command dial to change. • Changes are not saved to the current settings bank. • Settings that differ from those in the current settings bank (t–u) are shown in red. SELECT CUSTOM SETTING BASE 400 SET Press Q to exit when settings are complete. Shortcuts N The quick menu can also be edited using touch controls. 9 194 END The Q (Quick Menu) Button Editing the Quick Menu To choose the items displayed in the quick menu: 1 Press and hold the Q button during shooting. 2 The current quick menu will be displayed; use the focus stick (focus lever) to highlight the item you wish to change and press MENU/OK. 3 Highlight any of the following options and press MENU/OK to assign it to the selected position. * * * * * * * * * * * • MF ASSIST • TOUCH SCREEN MODE • SELF-TIMER • PHOTOMETRY • SHUTTER TYPE • FLICKER REDUCTION • ISO • FLASH FUNCTION SETTING • FLASH COMPENSATION • MOVIE MODE • MIC LEVEL ADJUSTMENT • EVF/LCD BRIGHTNESS • EVF/LCD COLOR • NONE * Shortcuts • IMAGE SIZE • IMAGE QUALITY • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • DYNAMIC RANGE • WHITE BALANCE • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • NOISE REDUCTION • SELECT CUSTOM SETTING • AF MODE • FACE/EYE DETECTION SETTING 9 * Stored in custom settings bank. N • Select NONE to assign no option to the selected position. • When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE. N The quick menu can also be edited using D BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU. 195 The Fn (Function) Buttons Assign a role to the function buttons for quick access to the selected feature. N The functions assigned to T-Fn1 through T-Fn4 can be accessed by flicking the monitor. The default assignments are: Fn1 button Fn2 button Sensitivity Front command dial switch Fn3 button Fn4 button Exposure lock Focus lock Shortcuts Fn5 button 9 AF mode 196 The Fn (Function) Buttons T-Fn1 (flick up) T-Fn2 (flick left) Histogram Film simulation T-Fn3 (flick right) T-Fn4 (flick down) White balance Electronic level Drive button Center of rear command dial Drive button Focus check Shortcuts 9 197 Assigning Roles to the Function Buttons To assign roles to the buttons: Shortcuts 9 1 Press and hold the DISP/BACK button until a control selection menu is displayed. 2 Highlight a control and press MENU/OK. 3 Highlight the desired role and press MENU/OK to assign it to the selected control. Choose from: • IMAGE SIZE • IMAGE QUALITY • RAW • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • DYNAMIC RANGE • WHITE BALANCE • SELECT CUSTOM SETTING • FOCUS AREA • FOCUS CHECK • AF MODE • RAPID AF • FACE/EYE DETECTION SETTING • DRIVE BUTTON • SELF-TIMER • AE BKT SETTING • FOCUS BKT SETTING • PHOTOMETRY • SHUTTER TYPE • FLICKER REDUCTION • ISO • 35mm FORMAT MODE 198 • WIRELESS COMMUNICATION • FLASH FUNCTION SETTING • TTL-LOCK • MODELING FLASH • MIC LEVEL ADJUSTMENT • PREVIEW DEPTH OF FIELD • PREVIEW EXP./WB IN MANUAL MODE • NATURAL LIVE VIEW • HISTOGRAM • ELECTRONIC LEVEL • LARGE INDICATORS MODE • FRONT COMMAND DIAL SWITCH • AE LOCK ONLY • AF LOCK ONLY • AE/AF LOCK • AF-ON • LOCK SETTING • AUTO IMAGE TRANSFER • SELECT PAIRING DESTINATION • Bluetooth ON/OFF • PLAYBACK • NONE (control disabled) The Fn (Function) Buttons N • AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4). • Button assignments can also be selected using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway. MODELING FLASH If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash). TTL-LOCK If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for F FLASH SETTING > TTL-LOCK MODE (P 125). Shortcuts 9 199 E MY MENU Access a personalized menu of frequently-used options. To display “my menu”, press MENU/OK in the shooting display and select the E (MY MENU) tab. MY MENU SELF-TIMER INTERVAL TIMER SHOOTING FILM SIMULATION GRAIN EFFECT SHUTTER TYPE IS MODE FACE/EYE DETECTION SETTING ISO EXIT N The E tab is only available if options have been assigned to MY MENU. MY MENU SETTING To choose the items listed in the E (MY MENU) tab: 1 Highlight D USER SETTING > MY MENU SETTING in the D (SET UP) tab and press MENU/OK. MY MENU SETTING ADD ITEMS RANK ITEMS REMOVE ITEMS Shortcuts 9 N To reorder items, select RANK ITEMS. To delete items, select REMOVE ITEMS. 2 Press the focus stick (focus lever) up or down to highlight ADD ITEMS and press MENU/OK. Options that can be added to “my menu” are highlighted in blue. MY MENU SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT COLOR CHROME EFFECT DYNAMIC RANGE WHITE BALANCE OK SELECT N Items currently in “my menu” are indicated by check marks. 200 CANCEL MY MENU 3 Choose a position for the item and press MENU/OK. The item will be added to “my menu”. SELECT ITEM LOCATION 1 IMAGE SIZE 2 IMAGE QUALITY MOVE 4 5 SAVE Press MENU/OK to return to the edit display. Repeat Steps 3 and 4 until all the desired items have been added. N “My menu” can contain up to 16 items. Shortcuts 9 201 MEMO 202 Peripherals and Optional Accessories 203 Lenses The camera can be used with lenses for the FUJIFILM G-mount. Lens Parts Peripherals and Optional Accessories A Lens hood B Mounting marks C Focus ring D Aperture ring lock release E Mounting marks (focal length) F Aperture ring G Lens signal contacts H Front lens cap I Rear lens cap N A GF63mmF2.8 R WR lens is used here for illustrative purposes. 10 204 Lenses Lens Care • Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. • Replace the front and rear caps when the lens is not in use. Removing Lens Caps Remove lens caps as shown. Attaching Lens Hoods When attached, lens hoods reduce glare and protect the front lens element. Peripherals and Optional Accessories N Lens caps may differ from those shown. 10 205 Lenses Aperture ring Rotate the lens aperture ring to choose the aperture (f-number). Aperture ring lock release Setting C( ) A( ) Peripherals and Optional Accessories Other values ( Aperture ring Description Set aperture to the value chosen with the camera command dial. Set aperture to the value chosen automatically by the camera. ) Set aperture to the selected value. N To select C or A, or to select another value after selecting C or A, press the aperture ring lock release while rotating the aperture ring. 10 206 External Flash Units Flash units can be mounted on the hot shoe or connected via the sync terminal. Use optional external flash units for flash photography. Some units support high-speed sync (FP) and can be used at shutter speeds faster than the flash sync speed, while others can function as master flash units controlling remote units via optical wireless flash control. O You may be unable to test-fire the flash in some circumstances, for example when a setup menu is displayed on the camera. Peripherals and Optional Accessories Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and a “FACE ON” option is selected for G AF/MF SETTING > FACE/EYE DETECTION SETTING. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. 10 207 Flash Settings To adjust settings for a flash unit mounted on the hot shoe or connected via the sync terminal: 1 2 Connect the unit to the camera. In shooting mode, select FLASH FUNCTION SETTING in the F (FLASH SETTING) menu tab. The options available vary with the flash unit. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING EXIT Menu Peripherals and Optional Accessories Description Displayed when no compatible flash unit is connected or SYNC if a unit is connected via the sync terminal or uses only TERMINAL the X-contact on the hot shoe. SHOE MOUNT Displayed when an optional flash unit is mounted on the FLASH hot shoe and turned on. Displayed if an optional flash unit functioning as a master MASTER flash for Fujifilm optical wireless remote flash control is (OPTICAL) connected and turned on. P 209 210 213 N SYNC TERMINAL will be also displayed if an incompatible flash unit or no flash unit is connected. 3 Highlight items using the focus stick (focus lever) and rotate the rear command dial to change the highlighted setting. MODE 10 SHOE MOUNT FLASH ADJUST 4 Press DISP/BACK to put the changes into effect. 208 END External Flash Units SYNC TERMINAL The following options are available when no compatible flash unit is connected or if a unit is connected via the sync terminal or uses only the X-contact on the hot shoe. MODE SYNC TERMINAL ADJUST END Setting The Sync Terminal Use the sync terminal to connect flash units that require a sync cable. Peripherals and Optional Accessories Description Choose from the following options: • M: A trigger signal is transmitted via the hot shoe X contacts when a picture is taken. Choose a shutter speed slower than A Flash control mode the sync speed; even slower speeds may be required if the unit uses long flashes or has a slow response time. • D (OFF): The trigger signal is disabled. Choose whether the flash is timed to fire immediately after the shutter opens (H/1ST CURTAIN) or immediately before B Sync it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in most circumstances. 10 209 SHOE MOUNT FLASH The following options are available when an optional shoe-mounted flash unit is attached and turned on. MODE SHOE MOUNT FLASH ADJUST Setting END Peripherals and Optional Accessories Description The flash control mode selected with the flash unit. This can in some cases be adjusted from the camera; the options available vary with the flash. • TTL: TTL mode. Adjust flash compensation (B). • M: The flash fires at the selected output regardless of subject A Flash control mode brightness or camera settings. Output in some cases can be adjusted from the camera (B). • MULTI: Repeating flash. Compatible shoe-mounted flash units will fire multiple times with each shot. • D (OFF): The flash does not fire. Some flash units can be turned off from the camera. 10 210 External Flash Units Setting 211 Peripherals and Optional Accessories Description The options available vary with flash control mode. • TTL: Adjust flash compensation (the full value may not be applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, and EF-42, the selected value is added to the value selected with the flash unit. B Flash compensation/ • M/MULTI: Adjust flash output (compatible units only). output Choose from values expressed as fractions of full power, from ⁄ (mode M) or ¼ (MULTI) down to ⁄ in increments equivalent to ⁄ EV. The desired results may not be achieved at low values if they exceed the limits of the flash control system; take a test shot and check the results. Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. F (STANDARD): The flash fires with every shot if possible; • C Flash mode (TTL) flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. D Sync • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain highspeed sync at shutter speeds faster than the flash sync speed. Equivalent to 1ST CURTAIN when MULTI is selected for flash control mode. 10 Setting E Zoom F Lighting G LED light G Number of flashes * Peripherals and Optional Accessories H Frequency * Description The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting. Choose how the built-in LED light functions during still photography (compatible units only): as a catchlight (M/CATCHLIGHT), as an AF-assist illuminator (N/AF ASSIST), or as both a catchlight and an AF-assist illuminator (O/AF ASSIST+CATCHLIGHT). Choose OFF to disable the LED during photography. Choose the number of times the flash fires each time the shutter is released in MULTI mode. Choose the frequency at which the flash fires in MULTI mode. * Full value may not be applied if limits of flash control system are exceeded. 10 212 External Flash Units MASTER(OPTICAL) The options will be displayed if the unit is currently functioning as master flash for Fujifilm optical wireless remote flash control. MODE MASTER(OPTICAL) ADJUST C A B Peripherals and Optional Accessories The master and remote units can be placed in up to three groups (A, B, and C) and flash mode and flash level adjusted separately for each group. Four channels are available for communication between the units; separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. END 10 213 Setting A Flash control mode (group A) B Flash control mode (group B) C Flash control mode (group C) Peripherals and Optional Accessories D Flash compensation/ output (group A) E Flash compensation/ output (group B) F Flash compensation/ output (group C) 10 214 Description Choose flash control modes for groups A, B, and C. TTL% is available for groups A and B only. • TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group. • TTL%: If TTL% is selected for either group A or B, you can specify the output of the selected group as a percentage of the other and adjust overall flash compensation for both groups. • M: In mode M, the units in the group fire at the selected output (expressed as a fraction of full power) regardless of subject brightness or camera settings. • MULTI: Choosing MULTI for any group sets all the units in all groups to repeating flash mode. All units will fire multiple times with each shot. • D (OFF): If OFF is selected, the units in the group will not fire. Adjust flash level for the selected group according to option selected for flash control mode. Note that the full value may not be applied if the limits of the flash control system are exceeded. • TTL: Adjust flash compensation. • M/MULTI: Adjust flash output. • TTL%: Choose the balance between groups A and B and adjust overall flash compensation. External Flash Units Setting G Flash mode (TTL) I Zoom 215 Peripherals and Optional Accessories H Sync Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain highspeed sync at shutter speeds faster than the flash sync speed. Equivalent to 1ST CURTAIN when MULTI is selected for flash control mode. The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length. 10 External Flash Units Setting J Lighting K Master K Number of flashes Peripherals and Optional Accessories L Channel L Frequency 10 216 Description If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting. Assign the master flash to group A (Gr A), B (Gr B), or C (Gr C). If OFF is selected, output from the master flash will be held to a level that does not affect the final picture. Available only if the unit is mounted on the camera hot shoe as a master flash for Fujifilm optical wireless remote flash control in TTL, TTL%, or M mode. Choose the number of times the flash fires each time the shutter is released in MULTI mode. Choose the channel used by the master flash for communication with the remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. Choose the frequency at which the flash fires in MULTI mode. Connections 217 HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. 1 2 Turn the camera off. Connect the cable as shown below. Insert into HDMI connector Insert into HDMI Micro connector (Type D) Connections 11 3 Configure the device for HDMI input as described in the documentation supplied with the device. 4 Turn the camera on. The contents of the camera display will be shown on the HDMI device. The camera display turns off in playback mode (P 219). O • Making sure the connectors are fully inserted. • The USB cable cannot be used while an HDMI cable is connected. • Use an HDMI cable no more than 1.5 m (4.9 ft.) long. 218 HDMI Output Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. Playback To start playback, press the camera a button. The camera monitor turns off and pictures and movies are output to the HDMI device. Note that the camera volume controls have no effect on sounds played on the TV; use the television volume controls to adjust the volume. O Some televisions may briefly display a black screen when movie playback begins. Connections 11 219 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) Access wireless networks and connect to computers, smartphones, or tablets. For more information, visit: http://fujifilm-dsc.com/wifi/ Smartphones and Tablets: FUJIFILM Camera Remote Connect to the camera via Bluetooth or wireless LAN. N To establish a wireless connection to the camera, you will need to install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet. FUJIFILM Camera Remote Once a connection has been established, you can use FUJIFILM Camera Remote to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera • Release the camera shutter • Update camera firmware For downloads and other information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ Connections 11 220 Wireless Connections SmartPhones and Tablets: Bluetooth® Pairing Use D CONNECTION SETTING > Bluetooth SETTINGS > PAIRING REGISTRATION to pair the camera with smartphones or tablets. Pairing offers a simple method for downloading photos from the camera. O • Photos are downloaded via a wireless connection. • Once pairing is complete, you will be able to synchronize the camera clock and location data with the smartphone or tablet (P 185). • You can choose a connection from up to 7 paired smartphones or tablets. Smartphones and Tablets: Wireless LAN Use the WIRELESS COMMUNICATION options in A SHOOTING SETTING or the playback menu to connect to a smartphone or tablet via a Wireless LAN. Connections 11 221 Wireless Connections Tethered Shooting: FUJIFILM X Acquire/FUJIFILM Tether Shooting Plug-in/FUJIFILM Tether Shooting Plug-in PRO/ Hyper-Utility Software HS-V5 SETTING • Before proceeding, select WIRELESS CONNECTION Bluetooth SETTINGS USB CARD READER NETWORK SETTING TETHER SHOOTING FIXED for D CONUSB TETHER SHOOTING AUTO PRINTER CONNECTION SETTING USB TETHER SHOOTING FIXED NECTION SETTING > PC CONNECTION PC CONNECTION MODE WIRELESS TETHER SHOOTING FIXED GENERAL SETTINGS USB RAW CONV./BACKUP RESTORE MODE in the camera menus. INFORMATION RESET WIRELESS SETTING • FUJIFILM X Acquire, the FUJIFILM Tether Shooting Plug-in, FUJIFILM Tether Shooting Plug-in PRO, and Hyper-Utility Software HS-V5 can be used for tethered shooting. N • For more information, visit the following website: http://app.fujifilm-dsc.com/en/#tether • For more information on FUJIFILM X Acquire, the FUJIFILM Tether Shooting Plug-in, FUJIFILM Tether Shooting Plug-in PRO, and Hyper-Utility Software HS-V5, see “Software from Fujifilm” (P 234). Connections 11 222 Connecting to Computers via USB Connect the camera to a computer to download pictures or take pictures remotely. N Before downloading pictures or taking pictures remotely, connect the camera to a computer and check that it functions normally. 1 2 Turn the computer on. 3 4 Turn the camera off. Adjust settings according to whether you will be using the camera for tethered shooting (P 226), copying pictures to a computer (P 227), save RAW pictures in other formats (P 228), or Saving and Loading Camera Settings (P 228). Connect a USB cable. O The USB cable must be no more than 1.5 m (4.9 ft.) long and be Connections USB connector (Type-C) suitable for data transfer. 11 223 5 6 Turn the camera on. Copy pictures to your computer. • Tethered shooting: During tethered shooting, you can copy pictures using tethered shooting software such as the FUJIFILM Tether Shooting Plug-in PRO. • Image transfer: Use MyFinePix Studio or applications provided with your operating system. • RAW conversion: Process RAW images using FUJIFILM X RAW STUDIO. The power of the camera’s image processing engine is used for rapid processing. • Saving and loading camera settings: Use FUJIFILM X Acquire to save or load camera settings. Save your preferred settings to a file in a single operation and copy them to multiple cameras. Connections 11 224 Connecting to Computers via USB O • Turn the camera off before disconnecting the USB cable. • When connecting USB cables, be sure the connectors are fully inserted in the correct orientation. Connect the camera directly to the computer; do not use a USB hub or keyboard. • Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or fully-charged battery before connecting the camera. • If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures. • Make sure that the indicator lamp is off or lit green before turning the camera off. • Do not disconnect the USB cable while transfer is in progress. Failure to observe this precaution could result in loss of data or damage to the memory card. • Disconnect the camera before inserting or removing memory cards. • In some cases, it may not be possible to access pictures saved to a network server using the software in the same way as on a standalone computer. • Do not immediately remove the camera from the system or disconnect the USB cable once the message stating that copying is in progress clears from the computer display. If the number of images copied is very large, data transfer may continue after the message has ceased to be displayed. • The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection. Connections 11 225 Tethered Shooting: FUJIFILM X Acquire/FUJIFILM Tether Shooting Plug-in/FUJIFILM Tether Shooting Plug-in PRO/ Hyper-Utility Software HS-V5 SETTING • Before proceeding, select USB TETHER CONNECTION Bluetooth SETTINGS USB CARD READER NETWORK SETTING SHOOTING AUTO for D CONNECTION USB TETHER SHOOTING AUTO PRINTER CONNECTION SETTING USB TETHER SHOOTING FIXED SETTING > PC CONNECTION MODE in PC CONNECTION MODE WIRELESS TETHER SHOOTING FIXED GENERAL SETTINGS USB RAW CONV./BACKUP RESTORE the camera menus. INFORMATION RESET WIRELESS SETTING • FUJIFILM X Acquire, the FUJIFILM Tether Shooting Plug-in, FUJIFILM Tether Shooting Plug-in PRO, and Hyper-Utility Software HS-V5 can be used for tethered shooting. N • Choose USB TETHER SHOOTING FIXED if the camera will be used solely for tethered shooting. Note that if the USB cable is disconnected, the camera will continue to function in tethered mode and pictures will not be saved to the camera memory card. • For more information, visit the following website: http://app.fujifilm-dsc.com/en/#tether • For more information on FUJIFILM X Acquire, the FUJIFILM Tether Shooting Plug-in, FUJIFILM Tether Shooting Plug-in PRO, and Hyper-Utility Software HS-V5, see “Software from Fujifilm” (P 234). Connections 11 226 Connecting to Computers via USB Copying Pictures to a Computer • Before copying pictures to a computer, select USB CARD READER for D CONNECTION SETTING > PC CONNECTION MODE. • The software that can be used to copy pictures varies with your computer operating system. CONNECTION SETTING Bluetooth SETTINGS USB CARD READER NETWORK SETTING USB TETHER SHOOTING AUTO PRINTER CONNECTION SETTING USB TETHER SHOOTING FIXED PC CONNECTION MODE WIRELESS TETHER SHOOTING FIXED GENERAL SETTINGS USB RAW CONV./BACKUP RESTORE INFORMATION RESET WIRELESS SETTING Mac OS X/macOS Pictures can be copied to your computer using Image Capture (supplied with your computer) or other software. Windows Use MyFinePix Studio to copy pictures to your computer, where they can be stored, viewed, organized, and printed. N For more information on MyFinePix Studio, see “Software from Fujifilm” (P 234). Connections 11 227 Connecting to Computers via USB Copying RAW Images in Other Formats: FUJIFILM X RAW STUDIO • Before proceeding, select USB RAW CONV./BACKUP RESTORE for D CONNECTION SETTING > PC CONNECTION MODE in the camera menus. • FUJIFILM X RAW STUDIO can be used to save copies of RAW images in other formats. CONNECTION SETTING Bluetooth SETTINGS USB CARD READER NETWORK SETTING USB TETHER SHOOTING AUTO PRINTER CONNECTION SETTING USB TETHER SHOOTING FIXED PC CONNECTION MODE WIRELESS TETHER SHOOTING FIXED GENERAL SETTINGS USB RAW CONV./BACKUP RESTORE INFORMATION RESET WIRELESS SETTING N For more information on FUJIFILM X RAW STUDIO, see “Software from Fujifilm” (P 234). Saving and Loading Camera Settings (FUJIFILM X Acquire) • Before proceeding, select USB RAW CONV./BACKUP RESTORE for D CONNECTION SETTING > PC CONNECTION MODE in the camera menus. • FUJIFILM X Acquire can be used to save and load camera settings. CONNECTION SETTING Bluetooth SETTINGS USB CARD READER NETWORK SETTING USB TETHER SHOOTING AUTO PRINTER CONNECTION SETTING USB TETHER SHOOTING FIXED PC CONNECTION MODE WIRELESS TETHER SHOOTING FIXED GENERAL SETTINGS USB RAW CONV./BACKUP RESTORE INFORMATION RESET WIRELESS SETTING N For more information on FUJIFILM X Acquire, see “Software from Fujifilm” (P 234). Connections 11 228 instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead. Connections 11 229 instax SHARE Printers Printing Pictures 1 Turn the printer on. 2 Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING FUJIFILM-CAMERA-1234 CANCEL 3 Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. PRINTER PRINT 100-0020 SET instax-12345678 CANCEL N • Pictures taken with other cameras cannot be printed. • The area printed is smaller than the area visible in the LCD monitor. • The displays may vary depending on the printer connected. 4 The picture will be sent to the printer and printing will start. Connections 11 230 Technical Notes 231 Accessories from Fujifilm The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit http://www.fujifilm.com/products/digital_cameras/index.html. Rechargeable Li-ion batteries NP-T125: Additional high-capacity NP-T125 rechargeable batteries can be purchased as required. Battery chargers BC-T125: Replacement battery chargers can be purchased as required. AC power adapters AC-15V: Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback, when copying pictures to a computer. It can also be used to charge the battery without removing it from the camera. FUJINON lenses GF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM G-mount. Mount adapters H MOUNT ADAPTER G: This mount adapter allows the camera to be used with SUPER EBC FUJINON accessories for the GX645AF, giving you the use of one additional teleconverter and nine different lenses. Macro extension tubes MCEX-18G WR/MCEX-45G WR: Mount this adapter between the lens and the camera body for macro photography with large reproduction ratios. Technical Notes View camera adapters VIEW CAMERA ADAPTER G: This adapter is for use with lenses for older FUJINON large-format cameras, including lenses in the CM FUJINON series. 12 232 Accessories from Fujifilm Shoe-mounted flash units EF-X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. Powered by four AA batteries or an optional EF-BP1 battery pack, it supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent) and features Fujifilm optical wireless flash control, allowing it to be used as a master or remote flash unit for remote wireless flash photography. The flash head can be rotated 90° up, 10° down, 135° left, or 180° right for bounce lighting. EF-42: This clip-on flash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent). The flash head can be rotated 90° up, 180° left, or 120° right for bounce lighting. EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.). Powered by two AAA batteries, this light, compact unit features a dial for adjusting TTL flash compensation or manual flash output. EF-20: This clip-on flash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported). The flash head can be rotated upwards 90° for bounce lighting. Remote releases RR-100: Use to reduce camera shake or keep the shutter open during a time exposure. Stereo microphones MIC-ST1: An external microphone for movie recording. Body caps BCP-002: Cover the camera lens mount when no lens is attached. instax SHARE printers SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film. Technical Notes 12 233 Software from Fujifilm The camera can be used with the following Fujifilm software. FUJIFILM Camera Remote Establish a wireless connection between your camera and a smartphone or tablet (P 220). http://app.fujifilm-dsc.com/en/camera_remote/ MyFinePix Studio Manage, view, print, and edit the many images downloaded from your digital camera (P 227). http://fujifilm-dsc.com/mfs/ Once download is complete, double-click the downloaded file (“MFPS_Setup.EXE”) and follow the on-screen instructions to complete installation. RAW FILE CONVERTER EX View RAW pictures on your computer and convert them into other formats. http://fujifilm-dsc.com/rfc/ Technical Notes 12 234 Software from Fujifilm FUJIFILM X RAW STUDIO When the camera is connected to a computer via USB, FUJIFILM X RAW STUDIO can use the camera’s unique image processing engine to rapidly convert RAW files to create high-quality images in other formats. http://fujifilm-x.com/x-stories/fujifilm-x-raw-studio-featuresusers-guide/ FUJIFILM X Acquire This application for Windows and macOS lets you connect to the camera via USB or Wi-Fi and automatically download photos to a specified folder as they are taken. http://fujifilm-x.com/x-stories/fujifilm-x-acquire-features-users-guide/ FUJIFILM Tether Shooting Plug-ins for Lightroom Plug-ins for Adobe® Photoshop® Lightroom® Classic CC. • FUJIFILM Tether Shooting Plug-in PRO http://fujifilm-x.com/x-stories/fujifilm-tether-plug-in-pro-features/ • FUJIFILM Tether Shooting Plug-in http://www.fujifilm.com/products/digital_cameras/accessories/ others/#soft Technical Notes Hyper-Utility Software HS-V5 This computer application lets you connect to the camera via USB or Wi-Fi, control the camera remotely, and save pictures taken with the camera directly to the computer. http://www.fujifilm.com/products/digital_cameras/accessories/ others/#soft 12 235 For Your Safety IMPORTANT SAFETY INSTRUCTIONS Instructions: All the safety and operating instructions • Read Instructions should be read before the appliance is operated. Instructions: The safety and operating instructions • Retain Instructions should be retained for future reference. Warnings: All warnings on the appliance and in the • Heed Warnings operating instructions should be adhered to. Instructions: All operating and use instructions • Follow Instructions should be followed. Technical Notes 12 Installation Power Sources: This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization: This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate Warnings: This video product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. Overloading: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. This video product should never be placed near or over a radiator or heat register. Attachments: Do not use attachments not recommended by the video product manufacturer as they may cause hazards. Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 236 Power-Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. Accessories: Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Antennas Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Ground Clamp Electric Servicee Equipmentt Antenna Lead in Wire AAnntenna Discharge Unit D (NEC N SECTION 8 810-20) Ground Clamps Power Service Grounding Electrode System (NEC ART 250. PART H) Grounding Conductors (NEC SECTION 810-21) For Your Safety Power Lines: An outside antenna system should not be locat- Damage Requiring Service: Unplug this video product from ed in the vicinity of overhead power lines or other electric the wall outlet and refer servicing to qualified service personlight or power circuits, or where it can fall into such power nel under the following conditions: lines or circuits. When installing an outside antenna system, • When the power-supply cord or plug is damaged extreme care should be taken to keep from touching such • If liquid has been spilled, or objects have fallen into the power lines or circuits as contact with them might be fatal. video product. • If the video product has been exposed to rain or water. Use If the video product has been dropped or the cabinet has Cleaning: Unplug this video product from the wall outlet be- • been damaged. fore cleaning. Do not use liquid cleaners or aerosol cleaners. If the video product does not operate normally follow the Use a damp cloth for cleaning. operating instructions. Adjust only those controls that are Object and Liquid Entry: Never push objects of any kind into covered by the operating instructions as an improper adjustthis video product through openings as they may touch dan- ment of other controls may result in damage and will often gerous voltage points or short out parts that could result in require extensive work by a qualified technician to restore a fire or electric shock. Never spill liquid of any kind on the the video product to its normal operation. video product. When the video product exhibits a distinct change in perforLightning: For added protection for this video product re- mance — this indicates a need for service. ceiver during a lightning storm, or when it is left unattended Replacement Parts: When replacement parts are required, be and unused for long periods of time, unplug it from the wall sure the service technician has used replacement parts specoutlet and disconnect the antenna or cable system. This will ified by the manufacturer or have the same characteristics as prevent damage to the video product due to lightning and the original part. Unauthorized substitutions may result in power-line surges. fire, electric shock or other hazards. Service Safety Check: Upon completion of any service or repairs to Servicing: Do not attempt to service this video product this video product, ask the service technician to perform yourself as opening or removing covers may expose you to safety checks to determine that the video product is in propdangerous voltage or other hazards. Refer all servicing to er operating condition. qualified service personnel. Be sure to read these notes before use Safety Notes • Make sure that you use your camera correctly. Read these The symbols on the product (including the accesories) represent the following: AC DC Class II equipment (The construction of the product is double-insulated.) safety notes and your Owner’s Manual carefully before use. • After reading these safety notes, store them in a safe place. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. Unplug from power socket The icons shown below are used to indicate the nature of the instructions which are to be observed. Triangular icons tell you that this information requires attention (“Important”). Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”). Filled circles with an exclamation mark indicate an action that must be performed (“Required”). Do not use in the bathroom or shower Do not use the camera in the bathroom or shower. This can cause a fire or electric shock. 237 Technical Notes This icon indicates that death or serious injury can result if the information is ignored. This icon indicates that personal injury or CAUTION material damage can result if the information is ignored. WARNING WARNING If a problem arises, turn the camera off, remove the battery, and disconnect and unplug the AC power adapter. Continued use of the camera when it is emitting smoke, is emitting any unusual odor, or is in any other abnormal state can cause a fire or electric shock. Contact your Fujifilm dealer. Do not allow water or foreign objects to enter the camera. If water or foreign objects get inside the camera, turn the camera off, remove the battery, and disconnect and unplug the AC power adapter. Continued use of the camera can cause a fire or electric shock. Contact your Fujifilm dealer. 12 WARNING Do not disassemble Do not touch internal parts Technical Notes 12 238 Never attempt to change or take apart the camera (never open the case). Failure to observe this precaution can cause fire or electric shock. Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation. Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord. These actions could damage the cord and cause a fire or electric shock. If the cord is damaged, contact your Fujifilm dealer. Do not place the camera on an unstable surface. This can cause the camera to fall or tip over and cause injury. Never attempt to take pictures while in motion. Do not use the camera while walking or driving. This can result in you falling down or being involved in a traffic accident. Do not touch any metal parts of the camera during a thunderstorm. This can cause an electric shock due to induced current from the lightning discharge. Do not use the battery except as specified. Load the battery as shown by the indicator. Do not disassemble, modify, or heat batteries. Do not drop, strike, or throw batteries or otherwise subject them to strong impacts. Do not use batteries that show signs of leaking, deformation, discoloration, or other abnormalities. Use only designated chargers to recharge rechargeable batteries and do not attempt to recharge non-rechargeable Li-ion or alkaline batteries. Do not short batteries or store them with metallic objects. Failure to observe these precautions could result in the batteries overheating, igniting, rupturing, or leaking, causing fire, burns, or other injury. Use only batteries or AC power adapters specified for use with this camera. Do not use voltages other than the power supply voltage shown. The use of other power sources can cause a fire. If the battery leaks and fluid gets in contact with your eyes, skin or clothing, flush the affected area with clean water and seek medical attention or call an emergency number right away. Do not use the charger to charge batteries other than those specified here. The supplied charger is for use only with batteries of the type supplied with the camera. Using the charger to charge conventional batteries or other types of rechargeable batteries can cause the battery to leak, overheat or burst. WARNING Using a flash too close to a person’s eyes may cause visual impairment. Take particular care when photographing infants and young children. Do not remain in prolonged contact with hot surfaces. Failure to observe this precaution could result in low-temperature burns, particularly at high ambient temperatures or with users who suffer from poor circulation or reduced sensation, in which case use of a tripod or similar precautions are recommended. Do not leave one part of the body in contact with the product for prolonged periods while the product is on. Failure to observe this precaution could result in low-temperature burns, particularly during prolonged use, at high ambient temperatures, or with users who suffer from poor circulation or reduced sensation, in which case use of a tripod or similar precautions are recommended. Do not use in the presence of flammable objects, explosive gases, or dust. When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover the battery terminals with insulation tape. Contact with other metallic objects or batteries could cause the battery to ignite or burst. Keep memory cards, hot shoes, and other small parts out of the reach of small children. Children may swallow small parts; keep out of reach of children. Should a child swallow a small part, seek medical attention or call emergency. Keep out of reach of small children. Among the elements that could cause injury are the strap, which could become entangled about a child’s neck, causing strangulation, and the flash, which could cause visual impairment. Follow the directions of airline and hospital personnel. This product generates radio-frequency emissions that could interfere with navigational or medical equipment. CAUTION Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock. Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. This can cause a fire. Do not place heavy objects on the camera. This can cause the heavy object to tip over or fall and cause injury. Do not move the camera while the AC power adapter is still connected. Do not pull on the connection cord to disconnect the AC power adapter. This can damage the power cord or cables and cause a fire or electric shock. For Your Safety CAUTION Do not cover or wrap the camera or the AC power adapter in a cloth or blanket. This can cause heat to build up and distort the casing or cause a fire. Do not use the plug if it is damaged or if it does not fit securely into the outlet. Failure to observe this precaution could result in fire or electric shock. When you are cleaning the camera or you do not plan to use the camera for an extended period, remove the battery and disconnect and unplug the AC power adapter. Failure to do so can cause a fire or electric shock. When charging ends, unplug the charger from the power socket. Leaving the charger plugged into the power socket can cause a fire. CAUTION When a memory card is removed, the card could come out of the slot too quickly. Use your finger to hold it and gently release the card. Injury could result to those struck by the ejected card. Request regular internal testing and cleaning for your camera. Build-up of dust in your camera can cause a fire or electric shock. Contact your Fujifilm dealer to request internal cleaning every two years. Please note that this service is not free of charge. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. The Battery and Power Supply Note: Check the type of battery used in your camera and read ■ Battery Life the appropriate sections. At normal temperatures, the battery can be recharged about WARNING: Battery shall not be exposed to excessive heat 300 times. A noticeable decrease in the length of time the battery will hold a charge indicates that it has reached the such as sunshine, fire or the like. end of its service life and should be replaced. The following describes the proper use of batteries and how to prolong their life. Incorrect use can shorten battery life or ■ Storage Performance may be impaired if the battery is left unused cause leakage, overheating, fire, or explosion. for extended periods when fully charged. Run the battery Li-ion Batteries flat before storing it. Read this section if your camera uses a rechargeable Li-ion If the camera will not be used for an extended period, rebattery. move the battery and store it in a dry place with an ambient The battery is not charged at shipment. Charge the battery temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do before use. Keep the battery in its case when not in use. not store in locations exposed to extremes of temperature. ■ Notes on the Battery ■ Cautions: Handling the Battery The battery gradually loses its charge when not in use. • Do not transport or store with metal objects such as neckCharge the battery one or two days before use. laces or hairpins. Battery life can be extended by turning the camera off when • Do not expose to flame or heat. not in use. • Do not disassemble or modify. Battery capacity decreases at low temperatures; a depleted • Use with designated chargers only. battery may not function when cold. Keep a fully charged • Dispose of used batteries promptly. spare battery in a warm place and exchange as necessary, • Do not drop or subject to strong physical shocks. or keep the battery in your pocket or other warm place and • Do not expose to water. insert it in the camera only when shooting. Do not place the • Keep the terminals clean. battery in direct contact with hand warmers or other heating • The battery and camera body may become warm to the touch after extended use. This is normal. devices. ■ Caution: Disposal Charge the battery in the supplied battery charger. Charging Dispose of used batteries in accord with local regulations. times will increase at ambient temperatures below +10 °C Attention should be drawn to the environmental aspects of (+50 °F) or above +35 °C (+95 °F). Do not attempt to charge the battery disposal. Use the apparatus under moderate climate. battery at temperatures above +40 °C (+104 °F); at temperatures below +5 °C (+41 °F), the battery will not charge. Do not attempt to recharge a fully charged battery. The battery does not however need to be fully discharged before charging. The battery may be warm to the touch immediately after charging or use. This is normal. ■ Charging the Battery Technical Notes 12 239 AC Power Adapters Use only Fujifilm AC power adapters designated for use with this camera. Other adapters could damage the camera. • The AC power adapter is for indoor use only. • Be sure the DC plug is securely connected to the camera. • Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable. • Do not use with other devices. • Do not disassemble. • Do not expose to high heat and humidity. • Do not subject to strong physical shocks. • The adapter may hum or become hot to the touch during use. This is normal. • If the adapter causes radio interference, reorient or relocate the receiving antenna. Using the Camera • Do not aim the camera at extremely bright light sources, such as the sun in a cloudless sky. Failure to observe this precaution could damage the camera image sensor. • Strong sunlight focused through the viewfinder may damage the panel of electronic viewfinder (EVF). Do not aim the electronic viewfinder at the sun. Take Test Shots Before taking photographs on important occasions (such as at weddings or before taking the camera on a trip), take a test shot and view the results to ensure that the camera is functioning normally. FUJIFILM Corporation cannot accept liability for damages or lost profits incurred as a result of product malfunction. Technical Notes 12 Trademark Information Digital Split Image is a trademark or registered trademark of FUJIFILM Corporation. Digital Micro Prism is a trademark or registered trademark of FUJIFILM Corporation. xD-Picture Card and E are trademarks of FUJIFILM Corporation. The typefaces included herein are solely developed by DynaComware Taiwan Inc. Mac, OS X, and macOS are trademarks of Apple Inc. in the U.S.A. and other countries. Windows is a registered trademark of Microsoft Corporation in the U.S.A. and other countries. Adobe, the Adobe logo, Photoshop, and Lightroom are trademarks or registered trademarks of Adobe Systems Incorporated in the U.S.A. and other countries. Wi-Fi® and Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi Alliance. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc., and any use of such marks by Fujifilm is under license. The SDHC and SDXC logos are trademarks of SD-3C, LLC. The HDMI logo is a trademark or registered trademark of HDMI Licensing LLC. All other trade names mentioned in this manual are the trademarks or registered trademarks of their respective owners. Notes on Copyright Unless intended solely for personal use, images recorded using your digital camera system cannot be used in ways that infringe copyright laws without the consent of the owner. Note that some restrictions apply to the photographing of stage performances, entertainments, and exhibits, even when intended purely for personal use. Users are also asked Electrical Interference to note that the transfer of memory cards containing images This camera may interfere with hospital or aviation equipor data protected under copyright laws is only permissible ment. Consult with hospital or airline staff before using the within the restrictions imposed by those copyright laws. camera in a hospital or on an aircraft. Handling Color Television Systems To ensure that images are recorded correctly, do not subject NTSC (National Television System Committee) is a color telethe camera to impact or physical shocks while images are vision telecasting specification adopted mainly in the U.S.A., being recorded. Canada, and Japan. PAL (Phase Alternation by Line) is a color Liquid Crystal television system adopted mainly in European countries and In the event that the display is damaged, care should be tak- China. en to avoid contact with liquid crystal. Take the urgent action Exif Print (Exif Version 2.3) indicated should any of the following situations arise: Exif Print is a newly revised digital camera file format in which • If liquid crystal comes in contact with your skin, clean the information stored with photographs is used for optimal colarea with a cloth and then wash thoroughly with soap and or reproduction during printing. running water. IMPORTANT NOTICE: Read Before Using the Software • If liquid crystal enters your eyes, flush the affected eye with clean water for at least 15 minutes and then seek medical Direct or indirect export, in whole or in part, of licensed softassistance. ware without the permission of the applicable governing • If liquid crystal is swallowed, rinse your mouth thoroughly bodies is prohibited. with water. Drink large quantities of water and induce vomiting, then seek medical assistance. Although the display is manufactured using extremely high-precision technology, it may contain pixels that are always lit or that do not light. This is not a malfunction, and images recorded with the product are unaffected. 240 For Your Safety NOTICES To prevent fire or shock hazard, do not expose the unit to rain or moisture. Please read the “Safety Notes” and make sure you understand them before using the camera. Perchlorate Material—special handling may apply. See: http://www.dtsc.ca.gov/hazardouswaste/perchlorate For Customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Contains IC : 10293A-WMBNBM26A Contains FCC ID : COF-WMBNBM26A FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord. A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. Technical Notes 12 241 For Customers in Canada CAN ICES-3 (B)/NMB-3(B) CAUTION: This Class B digital apparatus complies with Canadian ICES-003. Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Radiation Exposure Statement: The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. GFX 50R has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. Technical Notes 12 242 Disposal of Electrical and Electronic Equipment in Private Households In the European Union, Norway, Iceland and Liechtenstein: This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. This symbol on the batteries or accumulators indicates that those batteries shall not be treated as household waste. If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local requirements. The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. In Countries Outside the European Union, Norway, Iceland and Liechtenstein: If you wish to discard this product, including the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal. In Japan: This symbol on the batteries indicates that they are to be disposed of separately. For Your Safety Technical Notes Wireless Network and Bluetooth Devices: Cautions This product complies with the following EU Directives: • Security: Wireless network and Bluetooth devices transmit data via radio and consequently their use requires great• RoHS Directive 2011/65/EU er attention to security than applies in the case of wired • RE Directive 2014/53/EU Hereby, FUJIFILM Corporation declares that the radio networks. - Do not connect to unknown networks or networks to equipment type FF180004 is in compliance with Directive which you do not have access rights, even if they are 2014/53/EU. displayed on your device, as such access may be considThe full text of the EU declaration of conformity is available ered unauthorized. Connect only to networks to which at the following internet address: http://www.fujifilm.com/ you have access rights. products/digital_cameras/gfx/fujifilm_gfx_50r/pdf/index/ - Be aware that wireless transmissions may be vulnerable fujifilm_gfx_50r_cod.pdf to interception by third parties. This compliance is indicated by the following conformity • The following may be punishable by law: marking placed on the product: - Disassembly or modification or this device - Removal of device certification labels • This device operates on the same frequency as commercial, eduThis marking is valid for non-Telecom products and EU harmo- cational, and medical devices and wireless transmitters. It also operates on the same frequency as licensed transmitters nized Telecom products (e.g. Bluetooth®). and special unlicensed low-voltage transmitters used in IMPORTANT: Read the following notices before using the camRFID tracking systems for assembly lines and in other simera’s built-in wireless transmitter. ilar applications. Q This product, which contains encryption function de- • To prevent interference with the above devices, observe the folveloped in the United States, is controlled by the United lowing precautions. Confirm that the RFID transmitter is not States Export Administration Regulations and may not in operation before using this device. Should you observe be exported or re-exported to any country to which the that the device causes interference in licensed transmitters United States embargoes goods. used for RFID tracking, immediately stop using the affected device.. Fujifilm does frequency or move the device to another location. If you • Use only a wireless network or Bluetooth device not accept liability for damages resulting from unautho- notice that this device causes interference in low-voltage rized use. Do not use in applications requiring a high de- RFID tracing systems, contact a Fujifilm representative. gree of reliability, for example in medical devices or other • Do not use this device on board an aircraft. Note that Bluetooth systems that may directly or indirectly impact human life. may remain on even when the camera is off. Bluetooth When using the device in computer and other systems that can be disabled by selecting OFF for D CONNECTION demand a greater degree of reliability than offered by wire- SETTING > Bluetooth SETTINGS > Bluetooth ON/ less network or Bluetooth devices, be sure to take all neces- OFF. sary precautions to ensure safety and prevent malfunction. • Use only in the country in which the device was purchased. This device conforms to regulations governing wireless network and Bluetooth devices in the country in which it was purchased. Observe all location regulations when using the device. Fujifilm does not accept liability for problems arising from use in other jurisdictions. • Do not use the device in locations subject to magnetic fields, static electricity, or radio interference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio interference that may prevent reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of other wireless devices operating in the 2.4 GHz band. • The wireless transmitter operates in the 2.4 GHz band using DSSS, OFDM and GFSK modulation. 12 243 For Your Safety Be sure to read these notes before using the lens Safety Notes WARNING • Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use. • After reading these safety notes, store them in a safe place. Do not immerse About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. Do not disassemble This icon indicates that death or serious injury can result if the information is ignored. This icon indicates that personal injury or CAUTION material damage can result if the information is ignored. Do not touch internal parts WARNING The icons shown below are used to indicate the nature of the instructions which are to be observed. Triangular icons tell you that this information requires attention (“Important”). Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”). Filled circles with an exclamation mark indicate an action that must be performed (“Required”). Technical Notes 12 244 Do not immerse in or expose to water. Failure to observe this precaution can cause a fire or electric shock. Do not disassemble (do not open the case). Failure to observe this precaution can cause fire, electric shock, or injury due to product malfunction. Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation. Do not place on unstable surfaces. The product may fall, causing injury. Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause permanent visual impairment. CAUTION Do not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dusty. Failure to observe this precaution can cause fire or electric shock. Do not leave in direct sunlight or in locations subject to very high temperatures, such as in a closed vehicle on a sunny day. Failure to observe this precaution can cause fire. Keep out of the reach of small children. This product could cause injury in the hands of a child. Do not handle with wet hands. Failure to observe this precaution can cause electric shock. Keep the sun out of the frame when shooting backlit subjects. Sunlight focused into the camera when the sun is in or close to the frame can cause fire or burns. When the product is not in use, replace the lens caps and store out of direct sunlight. Sunlight focused by the lens can cause fire or burns. Do not carry the camera or lens while they are attached to a tripod. The product can fall or strike other objects, causing injury. Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. To prevent dust entering the camera, replace the body cap when no lens is in place. Image sensor: Multiple photographs marred by spots or blotches in identical locations may indicate the presence of dust on the image sensor. Clean the sensor using D USER SETTING > SENSOR CLEANING. Technical Notes 12 245 Cleaning the Image Sensor Dust that cannot be removed using D USER SETTING > SENSOR CLEANING can be removed manually as described below. O Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. O Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary. 3 Replace the body cap or lens. Technical Notes 12 246 Firmware Updates Updates to product firmware may result in changes not described in the manual. For more information, visit: http://www.fujifilm.com/support/digital_cameras/software Checking the Firmware Version O The camera will only display the firmware version if a memory card is inserted. 1 2 Turn the camera off and check that a memory card is inserted. 3 Turn the camera off. Turn the camera on while pressing the DISP/BACK button. The current firmware version will be displayed; check the firmware version. N To view the firmware version or update firmware for optional accessories such as interchangeable lenses, shoe-mounted flash units, and mount adapters, mount the accessories on the camera. Technical Notes 12 247 Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t find the solution here, contact your local Fujifilm distributor. Power and Battery Problem Solution • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 29). The camera does not turn on. • The battery is inserted incorrectly: Reinsert in the correct orientation (P 32). • The battery-chamber cover is not latched: Latch the battery-chamber cover (P 32). The monitor may not turn on if the camera is turned off The monitor does not and then on again very quickly. Keep the shutter button turn on. pressed halfway until the monitor activates. • The battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera immediately before taking a picture. • There is dirt on the battery terminals: Clean the terminals The battery runs down with a soft, dry cloth. quickly. • ON is selected for G AF/MF SETTING > PRE-AF: Turn PRE-AF off (P 103). • The battery has been charged many times: The battery has reached the end of its charging life. Purchase a new battery (P 159). The battery is exhausted: Charge the battery or insert a The camera turns off fully-charged spare battery (P 29). suddenly. Technical Notes 12 248 Troubleshooting Problem Solution • Insert the battery (P 32). • Reinsert the battery in the correct orientation (P 32). Make sure that the charger is correctly plugged Charging does not start. • in (P 29). • Ensure that the plug adapter is correctly connected to the charger (P 29). Charging is slow. Charge the battery at room temperature. • There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth (P 32). The charging lamp The battery has been charged many times: The battery has • blinks, but the battery reached the end of its charging life. Purchase a new batdoes not charge. tery. If the battery still fails to charge, contact your Fujifilm dealer (P 232). Menus and Displays Problem Solution Select ENGLISH for D USER SETTING > Qa Display is not in English. (P 41, 158). Technical Notes 12 249 Shooting Problem Solution • The memory card is full: Insert a new memory card or delete pictures (P 34, 138). • The memory card is not formatted: Format the memory card in the camera (P 156). • There is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth. No picture is taken when The memory card is damaged: Insert a new memory card • the shutter button is (P 34). pressed. • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 29). • The camera has turned off automatically: Turn the camera on (P 37). • You are using a third-party mount adapter: Select ON for SHOOT WITHOUT LENS (P 177). Mottling (“noise”) Gain is increased to aid composition when the subject is appears in the monitor poorly lit and aperture is stopped down, which may result or viewfinder when in noticeable mottling when images are previewed in the the shutter button is displays. Images taken with the camera are unaffected. pressed halfway. The camera does not The subject is not suited to autofocus: Use focus lock or manual focus. focus (P 81). Technical Notes 12 250 Troubleshooting Problem Solution • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 104). • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face occupies a larger area of the frame (P 104). • The subject’s face is turned away from the camera: Ask the subject to face the camera (P 104). • The camera is tilted: Keep the camera level. • The subject’s face is poorly lit: Shoot in bright light. The selected subject is closer to the center of the frame Wrong subject is than the main subject. Disable face detection, select sinselected. gle-point AF, and use focus-area selection to position the focus area over your subject (P 67, 69). • The flash is disabled: Adjust settings (P 124). • The battery is exhausted: Charge the battery or insert a fulThe flash does not fire. ly-charged spare battery (P 29). • The camera is in bracketing or continuous mode: Select single frame mode (P 6). No face is detected. Technical Notes 12 251 Problem Solution • The subject is not in range of the flash: Position the subject in The flash does not fully light the subject. range of the flash. • The flash window is obstructed: Hold the camera correctly. • Shutter speed is faster than the sync speed: Choose a slower shutter speed (P 58, 62, 262). Pictures are blurred. Pictures are mottled. Technical Notes 12 252 • The lens is dirty: Clean the lens. • The lens is blocked: Keep objects away from the lens (P 45). • s is displayed during shooting and the focus frame is displayed in red: Check focus before shooting (P 46). • Shutter speed is slow and the ambient temperature is high: This is normal and does not indicate a malfunction. Use pixel mapping (P 98). • The camera has been used continuously at high temperatures: Turn the camera off and wait for it to cool down (P 37, 259). • A temperature warning is displayed: Turn the camera off and wait for it to cool down (P 37, 259). Troubleshooting Playback Problem Pictures are grainy. Playback zoom is unavailable. No sound in movie playback. Solution The pictures were taken with a different make or model of camera. The pictures were created using RESIZE or with a different make or model of camera. • Playback volume is too low: Adjust playback volume (P 161). • The microphone was obstructed: Hold the camera correctly during recording. • The speaker is obstructed: Hold the camera correctly during playback. Selected pictures are not deleted. Some of the pictures selected for deletion are protected. Pictures remain after Remove protection using the device with which it was ERASE > ALL FRAMES is originally applied (P 142). selected. The battery-chamber cover was opened while the camFile numbering is era was on. Turn the camera off before opening the batunexpectedly reset. tery-chamber cover (P 182). Technical Notes 12 253 Connections Problem The monitor is blank. Both the TV and camera monitor are blank. No picture or sound on TV. The computer does not recognize the camera. Cannot transfer RAW or JPEG files to computer. Technical Notes 12 254 Solution The camera is connected to a TV: Pictures will be displayed on the TV instead of in the camera monitor (P 218). The display mode selected with the VIEW MODE button is EVF ONLY + E: Put your eye to the viewfinder. Use the VIEW MODE button to choose another display mode (P 14). • The camera is not properly connected: Connect the camera properly (P 218). • Input on the television is set to “TV”: Set input to “HDMI” (P 218). • The volume on the TV is too low: Use the controls on the television to adjust the volume (P 218). Be sure the camera and computer are correctly connected (P 223). Use MyFinePix Studio to transfer pictures (Windows only; P 223). Troubleshooting Wireless Transfer For additional information on troubleshooting wireless connections, visit: http://digital-cameras.support.fujifilm.com/app?pid=x Problem Cannot connect to smartphone. The camera is slow to connect or upload pictures to the smartphone. Upload fails or is interrupted. Solution • The smartphone is too far away: Move the devices closer (P 220). • Nearby devices are causing radio interference: Move the camera and smartphone away from microwave ovens or cordless phones (P 220). • The smartphone is connected to another device: The smart- Technical Notes phone and camera can connect to only one device at a time. End the connection and try again (P 220). • There are several smartphones in the vicinity: Try connecting again. The presence of multiple smartphones can make connection difficult (P 220). • The image was created on another device: The camera may Cannot upload images. not be able to upload images created on other devices. • The image is a movie: Although you can select movies for upload when viewing the contents of camera memory on your smartphone, upload will take some time. Movies intended for display on a smartphone or tablet should be recorded at a frame size of 1280 × 720 (HD) or smaller. For information on viewing the pictures on the camera, visit: http://app.fujifilm-dsc.com/en/camera_remote/ Select ON for GENERAL SETTINGS > RESIZE IMAGE Smartphone will not FOR SMARTPHONE H. Selecting OFF increases upload times for larger images; in addition, some phones may display pictures. not display images over a certain size (P 189). 12 255 Troubleshooting Miscellaneous Problem Solution • Temporary camera malfunction: Remove and reinsert the battery (P 32). The battery is exhausted: Charge the battery or insert a The camera is unresponsive. • fully-charged spare battery (P 29). • The camera is connected to a wireless LAN: End the conThe camera does not function as expected. No sound. Pressing the Q button does not display the quick menu. Technical Notes 12 256 nection. Remove and reinsert the battery (P 32). If the problem persists, contact your Fujifilm dealer. Adjust the volume (P 160). TTL-LOCK is active: End TTL-LOCK (P 125). Warning Messages and Displays The following warnings appear in the display. Warning Description Low battery. Charge the battery or insert a fully-charged i (red) spare battery. Battery exhausted. Charge the battery or insert a fulj (blinks red) ly-charged spare battery. The camera cannot focus. Use focus lock to focus on ans (displayed in red with other subject at the same distance, then recompose the red focus frame) picture. The subject is too bright or too dark and the picture will be Aperture or shutter over- or under-exposed. Use the flash for additional lightspeed displayed in red ing when taking photographs of poorly-lit subject. FOCUS ERROR LENS CONTROL ERROR Camera malfunction. Turn the camera off and then on TURN OFF THE CAMERA again. If the message persists, contact a Fujifilm dealer. AND TURN ON AGAIN The shutter can only be released when a memory card is NO CARD inserted. Insert a memory card. • The memory card is not formatted or the memory card has been formatted in a computer or other device: Format the memory card using D USER SETTING > FORMAT. CARD NOT INITIALIZED • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a Fujifilm dealer. Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on. LENS ERROR If the problem persists, contact a Fujifilm dealer. Technical Notes 12 257 Warning Description • The memory card is not formatted for use in the camera: Format the card. • The memory card contacts require cleaning or the memory card CARD ERROR PROTECTED CARD BUSY b MEMORY FULL WRITE ERROR FRAME NO. FULL Technical Notes 12 258 is damaged: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Incompatible memory card: Use a compatible card. • Camera malfunction: Contact a Fujifilm dealer. The memory card is locked. Unlock the card. The memory card is incorrectly formatted. Use the camera to format the card. The memory card is full and pictures cannot be recorded. Delete pictures or insert a memory card with more free space. • Memory card error or connection error: Reinsert the card or turn the camera off and then on again. If the message persists, contact a Fujifilm dealer. • Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card with more free space. • The memory card is not formatted: Format the memory card. The camera has run out of frame numbers (current frame number is 999-9999). Insert a formatted memory card and select RENEW for D SAVE DATA SET-UP > FRAME NO.. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for FRAME NO.. Warning Messages and Displays Warning Description • The file is corrupt or was not created with the camera: The file cannot be viewed. READ ERROR • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a Fujifilm dealer. An attempt was made to delete or rotate to a protected picPROTECTED FRAME ture. Remove protection and try again. The picture is damaged or was not created with the camera. CAN NOT CROP Print orders can contain no more than 999 pictures. Copy any additional pictures you wish to print to another memoDPOF FILE ERROR ry card and create a second print order. The picture cannot be printed using DPOF. CAN NOT SET DPOF F CAN NOT SET DPOF Movies cannot be printed using DPOF. The selected picture cannot be rotated. CAN NOT ROTATE F CAN NOT ROTATE Movies cannot be rotated. F CANNOT EXECUTE Red-eye removal cannot be applied to movies. Red-eye removal cannot be applied to pictures created m CANNOT EXECUTE with other devices. Turn the camera off and wait for it to cool. Mottling may p (yellow) increase in pictures taken when this warning is displayed. Turn the camera off and wait for it to cool. While this warning is displayed, movie recording may not be available, p (red) mottling may increase, and performance, including frame advance rate and display quality, may drop. Technical Notes 12 259 Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate. Capacity T Photos O 4∶3 8 GB 16 GB SUPER SUPER FINE FINE NORMAL FINE FINE NORMAL 254 381 607 524 785 1253 Movies * RAW (UNCOMPRESSED) RAW (LOSSLESS COMPRESSED) i1080/29.97P, 25P, 24P, 23.98P 26 minutes 54 minutes h720/29.97P, 25P, 24P, 23.98P 51 minutes 105 minutes 66 127 137 265 * Use a UHS speed class 1 card or better. Individual movies cannot exceed 30 minutes in length. O Although movie recording will continue without interruption when the file size reaches 4 GB, subsequent footage will be recorded to a separate file which must be viewed separately. Technical Notes 12 260 Specifications System Model Product Number Effective pixels Image sensor Storage media Memory card slots File system 261 Technical Notes FUJIFILM GFX 50R FF180004 Approx. 51.4 million 43.8 mm × 32.9 mm Bayer array with primary color filter Fujifilm-recommended SD/SDHC/SDXC memory cards Two SD memory card slots (UHS-II compliant) Compliant with Design Rule for Camera File System (DCF2.0), Exif 2.3, and Digital Print Order Format (DPOF) File format • Still pictures: Exif 2.3 JPEG (compressed); RAW (original RAF format, uncompressed or compressed using a lossless algorithm; special purpose software required); RAW+JPEG available; TIFF (RGB) • Movies: MPEG-4 AVC/H.264 standard with stereo sound (MOV) • Audio (voice memos): Stereo sound (WAV) Image size O 4∶3 (8256 × 6192) Q 4∶3 (4000 × 3000) O 3∶2 (8256 × 5504) Q 3∶2 (4000 × 2664) O 16∶9 (8256 × 4640) Q 16∶9 (4000 × 2248) O 1∶1 (6192 × 6192) Q 1∶1 (2992 × 2992) O 65∶24 (8256 × 3048) Q 65∶24 (4000 × 1480) O 5∶4 (7744 × 6192) Q 5∶4 (3744 × 3000) O 7∶6 (7232 × 6192) Q 7∶6 (3504 × 3000) RAW (8256 × 6192) TIFF (8256 × 6192) Lens mount FUJIFILM G mount Sensitivity • Still pictures: Standard output sensitivity equivalent to ISO 100 – 12800 in increments of ⁄ EV; AUTO; extended output sensitivity equivalent to ISO 50, 25600, 51200, or 102400 • Movies: Standard output sensitivity equivalent to ISO 200–6400 in increments of ⁄ EV; AUTO Metering 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE, CENTER WEIGHTED Exposure control Programmed AE (with program shift); shutter-priority AE; aperture-priority AE; manual exposure Exposure compensation • Still pictures: −5 EV – +5 EV in increments of ⁄ EV • Movies: −2 EV–+2 EV in increments of ⁄ EV 12 System Shutter speed Continuous • MECHANICAL SHUTTER, E-FRONT CURTAIN SHUTTER ⁃ Mode P: 4 s to ¼ s ⁃ Other modes: 60 min. to ¼ s ⁃ Time: 60 min. to ¼ s ⁃ Bulb: Max. 60 min. • ELECTRONIC SHUTTER, MECHANICAL + ELECTRONIC, E-FRONT + ELECTRONIC ⁃ Mode P: 4 s to ⁄ s ⁃ Other modes: 60 min. to ⁄ s ⁃ Time: 60 min. to ⁄ s ⁃ Bulb: Max. 60 min. • Available frame advance rates (JPEG): 3.0 fps • Approximate maximum number of shots per burst: 25 The frame rate varies with shooting conditions and the number of images recorded. In addition, the frame rate and number of frames per burst may vary depending on the type of memory card used. O Focus • Mode: Single or continuous AF; manual focus with focus ring • Autofocus system: TTL contrast-detect • Focus-area selection: SINGLE POINT, ZONE, WIDE/TRACKING White balance Auto, Custom 1, Custom 2, Custom 3, color temperature selection, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, incandescent, underwater Off, 2 sec., 10 sec. • MODE: TTL MODE (FLASH AUTO, STANDARD, SLOW SYNC.), MANUAL, MULTI, OFF • SYNC. MODE: 1ST CURTAIN, 2ND CURTAIN, AUTO FP (highspeed sync) • RED EYE REMOVAL: e FLASH+REMOVAL, L FLASH, d REMOVAL, OFF Accessory shoe with TTL contacts; supports sync speeds as fast as ⁄ s X contact; supports sync speeds as fast as ⁄ s Provided Self-timer Flash mode Technical Notes 12 Hot shoe Sync contact Sync terminal 262 Specifications System Viewfinder 0.5-in., 3690k-dot OLED viewfinder; magnification 0.77× with 50 mm lens (35 mm format equivalent) at infinity and diopter set to −1.0 m−1; diagonal angle of view approximately 38° (horizontal angle of view approximately 30°) • Diopter adjustment: −4 to +2 m−1 • Eyepoint: Approximately 23 mm 3.2-in/8.1 cm, 2360k-dot color LCD touch screen with 2-way tilt LCD monitor Movies i 1080/29.97P h 720/29.97P (with stereo sound) i 1080/25P h 720/25P i 1080/24P h 720/24P i 1080/23.98P h 720/23.98P Input/output terminals Digital input/output USB connector (Type-C) USB3.1Gen1 HDMI output HDMI Micro connector (type D) Microphone/Remote ⌀2.5 mm 3-pole mini jack release connector DC IN Provided Technical Notes 12 263 Power supply/other Power supply Battery life • NP-T125 rechargeable battery (supplied with camera) • AC-15V AC adapter (available separately) • Battery type: NP-T125 • Lens: GF63mmF2.8 R WR • Flash: Disabled • Shooting mode: Mode P AUTO POWER SAVE ON OFF Number of shots LCD Approx. 400 Approx. 340 EVF Approx. 400 Approx. 340 Total length of footage that can be recorded on a single charge Continuance Actual Battery life of Battery life of movie Mode movie capture capture Approx. 70 minutes Approx. 145 minutes i Technical Notes CIPA standard. Measured using battery supplied with camera and SD memory card. Note: Battery endurance varies with battery charge level and the figures given above are not guaranteed. Battery endurance will decline at low temperatures. Camera size 160.7 mm × 96.5 mm × 66.4 mm (46.0 mm excluding projections, (W × H × D) measured at thinnest part)/6.33 in. × 3.80 in. × 2.62 in. (1.81 in.) Camera weight Approx. 690 g/24.3 oz., excluding battery, accessories, and memory card Shooting weight Approx. 775 g/27.3 oz., including battery and memory card Operating conditions • Temperature: −10 °C to +40 °C/+14 °F to +104 °F (+5 °C to +40 °C/+41 °F to +104 °F when battery is charging) • Humidity: 10% to 80% (no condensation) 12 264 Specifications Wireless transmitter Wireless LAN Standards Operating frequency (center frequency) Access protocols Bluetooth® Standards Operating frequency (center frequency) IEEE 802.11b/g/n (standard wireless protocol) 2,412 MHz–2,462 MHz (11 channels) Infrastructure Bluetooth version 4.0 (Bluetooth Low Energy) 2,402 MHz–2,480 MHz NP-T125 rechargeable battery Nominal voltage 10.8 V Nominal capacity 1250 mAh Operating −10 °C to +40 °C/+14 °F to +104 °F temperature Dimensions 36.0 mm × 54.4 mm × 26.0 mm/1.4 in. × 2.1 in. × 1.0 in. (W × H × D) Weight Approx. 81 g/2.9 oz. N Weight and dimensions vary with the country or region of sale. O Specifications and performance are subject to change without notice. Fujifilm will not be held liable for any errors this manual may contain. The appearance of the product may differ from that described in this manual. 265 Technical Notes BC-T125 battery charger Rated input 100 V – 240 V AC, 50/60 Hz Input capacity 23 –31 VA Rated output 12.6 V DC, 800 mA Supported batteries NP-T125 rechargeable batteries Charging time Approx. 140 minutes (+25 °C/+77 °F) Operating +5 °C to +40 °C/+41 °F to +104 °F temperature Dimensions 71.4 mm × 97.0 mm × 34.2 mm/2.8 in. × 3.8 in. × 1.4 in., excluding projections (W × H × D) Weight Approx. 120 g/4.2 oz. 12 MEMO 266 MEMO 267 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN http://www.fujifilm.com/products/digital_cameras/index.html

Fujifilm GFX 50r Owner’s Manual

Related manuals

Fujifilm

X-T100

Fujifilm

X-T100 24.3MP 15-45mm Compact System Camera- Silver

Fujifilm

X30

Fujifilm

X30

Fuji Film

W2Z-02000004

Fujifilm

GFX 100S

Fujifilm

GFX100S

Fujifilm

X-E3

Fujifilm

GFX100S 系列

Fujifilm

X Pro2 Mirrorless Camera

Fujifilm

XA5 SILVER XC 15 45 LENS PINK