Kodak Instamatic 55-X Instructions
Below you will find brief information for Instamatic 55-X. This document provides essential instructions for operating your new Kodak Instamatic 55-X camera. It covers loading 126 film cartridges, taking outdoor pictures with advice on subject distance and framing, and using the unique Magicube Type X flash for indoor photography without needing batteries. You'll also learn how to advance film, monitor exposures, and properly unload the film cartridge for processing.
Advertisement
Advertisement
Advertisement
Key features
Uses Kodak 126 film cartridges (Kodacolor-X, Kodachrome-X, Ektachrome-X, Verichrome Pan Film)
Magicube Type X flash system (no batteries required)
Provides 4 flash exposures per Magicube
Simple film advance lever with exposure counter
Viewfinder for framing with margin guidance
Recommended outdoor shooting distance of 1.2-2.7 meters (4-9 feet)
Frequently asked questions
The Kodak Instamatic 55-X camera uses Kodak 126 film cartridges, including KODACOLOR-X for color prints, KODACHROME-X or EKTACHROME-X for color transparencies, and VERICHROME Pan Film for black-and-white pictures.
No, the Instamatic 55-X camera does not require batteries for flash photography. It uses Magicube Type X flashcubes, which contain their own firing mechanism.
A single Magicube allows you to take 4 flash pictures with the Instamatic 55-X camera.
For outdoor pictures, you should keep a minimum distance of 1.2 meters (4 feet) from your subject. For flash pictures, the subject should be between 1.2 and 2.7 meters (4 and 9 feet) from the camera.
After taking a picture, operate the advance lever repeatedly until it locks (about 1.5 strokes) or until it makes a distinct 'click' sound if using a flash. Do not count the clicks of the shutter release.
An indicator appears in the viewfinder if a used bulb faces forwards. If this happens, you can turn the Magicube anticlockwise to bring a fresh bulb to the firing position, or replace the Magicube if all bulbs have been used.