Kodak Instamatic 204 Instructions
PDF
Hati
Tangazo
Tangazo
KEEP YOUR CAMERA CLEAN If necessary, gently dust the lens and view- finder with a well-washed handkerchief, or use ‘Kodak’ Lens Cleaner. Keep fingers away from the lens and viewfinder. KEEP YOUR CAMERA SAFE Protect your camera with the "Kodak" Ever Ready Case, Code 797, and always use the strap. KEEP YOUR CAMERA READY Always keep your camera set to the prevailing weather condition and loaded with a Kodapak' Cartridge — you'll always be ready for a picture, KODAK PUBLICATIONS Ask your dealer to show you "BETTER PICTURES, Simply” (price 1s 0d), and the many other "Kodak publications — you will find them packed with useful hints and tips to help you take better and more interesting pictures. Instametic and product names quoted thus = "Kodak" = are trade marks. KODAK LIMITED LONDON Printed la England S136 ITPSAT/deHC 70) 3.65 Kodak INSTAMATIC 204 CAMERA instructions When you first get your camera, it's a good idea to take some pictures outdoors, and indoors with flash. This will give you practice before you set out to take important pictures. Your pictures cannot be spoiled by double exposures. Once the picture has been taken, the shutter will not operate again until you have wound on fully to the next exposure. NOTE: You cannot operate the camera without a "Kodapak’ cartridge loaded into it. 2 Kodak Films For superb colour transparencies, colour prints or black-and-white prints, ask your dealer for ‘Kodak’ size 126 films in the ‘Kodapak’ Cartridge. ‘Kodachrome-X" Film — for 20 colour trans- parencies. The price of the film includes processing. Post exposed film direct to a Kodak Processing Laboratory. Your colour transparencies will be returned to you mounted in 2x2-inch (5x5em) cardboard mounts, ready for projection. ‘Ektachrome-X" Film = for 20 colour trans- parencies, mounted in Z>XZ-inch (5x5cm) cardboard mounts ready for projection. Exposed "Ektachrome-X' Film may be taken to any Kodak dealer for processing. ‘“Kodacolor-X" Film —for 12 colour prints. Standard 31 x33-inch (9x9em) colour prints or bigger enlargements, can be made from your 28x28mm negatives. Ask your dealer for prints and enlargements on ‘Kodak’ Paper. "Verichrome" Pan Film = for 12 black-and- white prints. Standard 314 31-inch (9>x9cm) black-and-white prints, or bigger enlarge- ments, can be made from your 28x28mm negatives. Order prints from your Kodak dealer. 2 LOAD 4 WIND REPEATEDLY UNTIL LEVER LOCKS Operate the FILM ADVANCE lever repeatedly, as far as it will go, until the mechanism locks — About 12 full strokes to first exposure About 1% full strokes between pictures IMPORTANT: When winding on, disregard the number in the window in the camera back, This number (it may appear in duplicate) serves only as an exposure counter. Wind repeatedly until the lever locks. д. Taking the Picture 1 View the picture with your eye close to, and centred on, the rear viewfinder window. Don't obstruct the lens (with fingers, case or strap). 2 Generally, keep at least 5 feet from your subject for sharp pictures outdoors (but in bright sun, you may stand as close as 3 feet). For flash pictures, you must keep within the distances shown in the table on page 7. 3 Hold the camera firmly and press the SHUTTER RELEASE steadily to take the picture. Take care not to jerk the camera. 4 Wind until the lever locks (about 14 full strokes). You are ready forthe next picture. Outdoor Pictures For pictures Outdoors, simply set the DAYLIGHT POINTER to the weather condition. SHUTTER RELEASE Flash Pictures For Flash pictures indoors: Load the batteries (see page 9). Fit a | fresh Flashcube (see page 6). — Set FLASH POINTER to the flash- to-subject distance. DAYLIGHT POINTER a 3 be CLOUDY DULL or SHADE, sun not visible OPEN CLOUDY BRIGHT, no shadows Cast WEAK HAZY SUN, soft shadows cast BRIGHT SUN, distinct shadows cast E FLASHCUBE SOCKET FLASH POINTER EJECTOR BUTTON — When set to You may stand Sft (1m) 3—5ft (1-1 -5m) 6ft (2m) 5-—7ft (1-5—2m) 9ft (3m) 7—10ft (2-3m) 12ft (4m) 8-14ft (2-5—4m) from your subject 7 The Flashcube Your camera accepts the four-shot Flashcube enabling you to take up to four flash pictures in rapid succession without the need to change bulbs. The flashbulb will fire automatically when you take the picture. After each shot the Flashcube automatically rotates one quarter turn to bring a fresh bulb into position. To fit a Flashcube, simply locate the hollow stem over the central post of the Flashcube socket on the camera body, with one face of the cube towards the front of the camera. Press the cube down until it clicks into place. To release a used (or partly-used) Flasheube, press the EJECTOR BUTTON on the camera front. If fitting a partly-used Flashcube, make sure that it is fitted in the correct position with an unused bulb to the front and the next unused bulb to the left (strap end) of the camera. The cube may be rotated clockwise (in the direction of the arrow on the camera) by hand, to position the correct bulb. NOTE ®@ Do not obstruct the rotation of the Flasheube @ Lo not use a bulb if the blue spot at the front has turned pink @ Never take flash pictures in an explosive atmosphere Flash Batteries Two batteries are required. Use only Mallory Mn-2400, Ever Ready HP16 or Berec HP16. Other batteries are not recommended. Replace HP15 batteries at least every 12 months. LOAD CLOSE FULLY To install, slide open the battery compartment in camera base. Insert batteries, one base up and one base down. Close the cover fully. IMPORTANT: For good flash operation: — © Clean the battery ends occasionally with a rough cloth ® Check that batteries are fresh ® Ensure that battery cover is fully closed ® Remove batteries if camera is stored Unloading After the last picture has been taken WIND REPEATEDLY UNTIL ALL THE YELLOW PAPER WITH THE X's HAS DISAPPEARED. OPEN THE CAMERA, REMOVE THE EX- FOSED CARTRIDGE AND RE-LOAD WITH A FRESH ONE. NOTE: Do not remove the cartridge from the camera before all the yellow paper, with the X's, has bean moved past the window; other- wise several exposures will be “light-fogged™. Removing and replacing partially-exposed cartridges, even under darkroom conditions, may result in loss of one exposure due to slight “creeping” of the film during removal. 10 Hints and Tips [] Keep important parts of the subject well away from the edge of the viewfinder. ] Watch the background —if it is not im- portant, keep it plain. [| For colour pictures, make sure the sun is falling directly on the front of the subject. [Q For colour portraits (or groups) by flash, a better appearance of the eyes will result if the room is well lighted. [] For better colour slides of distant views, sea and snow pictures, use a 'Kodisk” Haze Filter, No. 255. [] For close-ups between 2 feet and 3% feet, use a ‘Kodisk’ Close-up Lens No. 255. But remember with close-Ups, to allow a little extra space at the top of your picture. If in doubt, ask your dealer for a free copy of the Kodak leaflet “Don't Lose Your Head". [] Outdoors, when the light is extremely poor, flash may be used to take subjects between B feet and 14 feet from the camera. Simply set the pointer to CLOUDY DULL, fit a Flashcube and take your picture. 11 ">
/
Pakua
Kikumbusho tu cha kirafiki. Unaweza kuona hati hapa hapa. Lakini muhimu zaidi, AI yetu tayari imesoma. Inaweza kuelezea mambo magumu kwa maneno rahisi, kujibu maswali yako katika lugha yoyote, na kukusaidia kuvinjari haraka hata hati ndefu au ngumu zaidi.
Tangazo