DETAILS
© Film Size—Kopaxk Мо. 126 film cartridge:
12- or 20-axposura.
® Negative Size—28 x 28mm.
Lens—- 38mm, 1/2.8 KoDax Extan
a Lens Openings=1/2.8 through 1/64.
a Lens Attachments—Accepts screw-in type,
34 x .5mm, Series 5 filters directly. Also,
Series 6 by adapter,
Shutter—Automatically Set
® Speeds=1/60, 1/125, 1/250: also 1/30,
sat by exposure control and 1/40 for flash,
Algo “E” for brief time exposures.
Focusing and Viewing
® Rangefinder—3Superimposed-image type,
combined with viewfinder,
e YViewfinder—QOptical, projected viowframe-
type with parallax marks for 6 feet,
#® Focusing Range=3 ft to infinity,
e llluminated signals for Insufficient light
and flash readiness.
Automatic Film Advance
@ Spring motor advances film=20 axpo-
sures, plus leader and trailer.
Automatic Daylight Exposure Control
e Fiim speed ls set automatically by film
cartridge (ASA 64 to 800).
® Lens openings set automatically by
electric eve.
® Automatic shutter control reduces speed
after maximum lens opening is reached.
Automatic Flash Control
a Guide number ls set automatically by film
cartridge (50 to 228).
* Built-in socket for 4-bulb flashcube.
a Correct lens opening is sot by focusing.
a Flash shutter speed (1/40 sec.) is set
automatically by Inserting flashcube,
® Uses 2 PX-B25 batteries.
Other Features
a Instant Loading and Unloading.
» Tripod Socket.
a Eyelets for neckstrap (supplied).
* Die-cast metal body; black and satin
chrome finish.
EASTMAN KODAK COMPANY + Rochester, New York 14650
Pr. Ma. 433090
ed CH—
Printed in tha United Stolos al America
KODAK
i "A
AUDAÄR
INSIAMATIG
814 CAMERA
1
KODAK
INSTAMAT Your KODAK INSTAMATIC 814 Camera is the most
distinguished member of the KODAK INSTAMATIC
81 4 family. In addition to its instant-loading feature, fine
f/2.8 EKTAR Lens, daylight exposure control (battery-
CAM ERA powered cadmium sulphide cell), and automatic flash
exposure control, it provides rangefinder focusing,
automatic film advance, illuminated finder signals, and
automatic flashbulh advance with the flasheube.
After inserting batteries, simply do this. ..
e Drop in 126 film cartridge—camera is loaded
e Wind Spring-Power Motor—first exposure is ready
e Look through Viewfinder and adjust Rangefinder—
camera 15 focused
e Compose picture and press Shutter Release—you've
taken the picture
..Feadon for the details
NOTICE: Equipment subject to minor appearance changes.
—
Wr.
A |
Kodachrome
TRANSPARENCY
PROCESSED BY
Kodak
4 Your camera takes
all threg—
1 Black-and-white
snapshots
2 Color snapshots
3 Color slides
Before you take any
important pictures,
camera and your op-
eration of it. Expose
pictures outdoors
and also indoors with
flash. If time is
pressing, a cartridge
of black-and-white
film can be proc-
essed very quickly.
FILM
Your camera accepls all KobDak
films in the 126 cartridge for instant
camera loading and unloading.
You can make black-and-white
snapshots, color snapshots, or color
slides. Snapshots are handy to carry,
mail, and make enlargements of—
slides are brilliant, compact, and
good for showing to large groups.
Select the film that provides the type
of picture you want.
NOTE: Storing the camera with the
motor fully wound does not weaken
the spring. If, after a cartridge has
bean removed from the camera, the
shutter release is pressed, the spring
tension is released. For the spring
motor to again retain power, a car-
tridge must be loaded in the camera.
Kopax VericHrOME Pan Film, VP 126 >
Konacoor-X Film, CX 126 >
KooacHroMe-X Film, KX 126 |p
Konax EXTACHROME-X Film, EX 126 |
Kopax High Speed ExracHrome Film, EH 126 №
A
gy =
For 12 black-and-white snapshots. Standard enlarged
black-and-white prints from your negatives are 3%: x
3% inches in size. Bigger enlargements are available.
For 12 or 20 color snapshots. Standard enlarged color
prints are 314 x 31 inches in size. Color slides, as well
as bigger color enlargements, are also available.
For 20 color slides. These color pictures on film are
framed in 2 x 2-inch mounts, for slide projection.
— "= BEE
For 20 color slides. Can be processed by the user or by
à laboratory. These color pictures on film are framed
in 2 x 2-inch mounts, for showing in slide projectors.
For 20 color slides. This extremely fast film is ideal for
taking pictures of dimly lighted subjects or fast action.
These color pictures on film are framed in 2 x 2-inch
mounts, for slide projection. Can be processed by user
or à laboratory.
Films, processing, printing, and mounting service, can
be obtained from your photo dealer.
NOTE:
You obtain color negatives
from Kopacowor-X Film.
These negatives are pri
marily for enlarged color
prints, but you can also db:
tain color slides from the
negatives. From Kopa-
CHROME-X, KoObaAK EkKTA-
CHRÔME-X, or High Speed
EETACHROME Film, vou ab.
tain color slides, ready for
projection. You can also
have duplicate slides or an:
larged color prints made
from the original slides.
LOADING
Open the back of the cam-
era by sliding the Lock but-
ton down to pop open the
hinged cover; then swing
out the cover, as far as it
will go, approximately per-
pendicular to the camera.
With the cover in its per-
pendicular loading position,
place a film cartridge in the
camera, as illustrated, with
the larger cylindrical end
down and toward the lock
button.
Close the back of the cam-
era by pressing the back
against the body until it
locks. The film name and
number of exposures per
cartridge appear in the wix-
pow on the back of the
camera. The film speed and
flash guide number are now
automatically set. (If the
motor is wound, the first
exposure positions itself im-
mediately.)
Raise the black PuLL-TAB, draw the winding tape straight out (as
above); then, while still grasping the tab, allow the tape to return
—repeat until the motor is fully wound (about 7 full strokes or until
locked.) * This windup positions film for the first exposure and
provides power to advance the film automatically for subsequent
exposures. If an arrow shows in the window, the first exposure
hasn't been reached, thus indicating insufficient windup. To get
the maximum number of advances, wind the motor fully after ex.
posure “1” is in place.
The number that appears in the center of the window on the
back of the camera (shown above, right) serves as your exposure
COUNTER. Thé same number may appear in duplicate.
“After winding, make sure the pull-tab is fully seated in its recess;
otherwise, film will not advance.
UNLOADING
1. After the last picture, the yel-
low paper will automatically move
past the window, provided the
spring motor has been wound
sufficiently. If not and an “YX
shows in the window, before
opening the back of the camera,
draw out the winding tape a few
strokes to advance the yellow
paper beyond the window.
2. Slide down the lock button:
open the back.
3. Turn the camera over to al-
low the cartridge to fall into your
hand. Close the back. Do not
open the cartridge—your pictures
may be ruined.
NOTE: Do not remove the car:
tridge from the camera until all
the yellow paper, with не "Ха,"
has been moved past the window:
otherwise several exposuras will
be "lightfogged.”” Removing and
replacing partially-exposed car-
tridges, even under darkroom con-
ditions, may result In loss of one
or more exposures,
INSTALL BATTERIES
Batteries must be installed before taking any pictures. Install two fresh 1.5-volt,
alkaline, button-type PX825 batteries (such as supplied with camera) fo power
the daylight exposure-control, warning signals and flash. Do this as follows:
First, clean battery contact surfaces with a rough cloth. Rotate the battery
compartment LATCH clockwise; the BATTERY CLIP will spring out so thal it can
be withdrawn for loading. As shown in the illustra-
tion, insert both batteries, positive (+) side up, into
the clip as far as they will go. Replace the loaded
clip in its compartment, plus (+) side up, as shown;
then hold the clip all the way in while rotating the
LATCH counterclockwise to its horizontal, lock posi-
HATTEHRY СЫР 1 = в -
tion. Test batteries, as below.
Battery Testing—A built-in battery tester permits you to periodically
check the present condition of your batteries for exposure-control
purposes. Merely press the Test BUTTON on the front of the camera,
If battery condition is satisfactory, a green light appears in the TEST
WINDOW. If not, clean battery contact surfaces with a rough cloth,
re-install, check, and, if necessary, replace with fresh batteries,
IMPORTANT —Because bright light actuating the electric eye causés
a slow battery drain, battery life can be greally extended by storing
the camera in a dark place or in the field case, described on page 17.
SHUTTER SETTING ITA TNA | INSTAMATIC 914
5 = Li os
Your camera has four manually
adjustable shutter settings — 60
(1/60 sec.), 125, 250, and “B" —
plus 1/40, which is automatical- "UU a. fy |
ly selected for flash by inserting oa % vi |
the flashcube in the socket. A Pc
shutter speed of 1/125 (125) is recommended for general daylight picturetak-
ing; the faster speed (250) is useful to minimize the effect of subject or camera
movement, while the slower speed (60) can be used for less favorable light
conditions.
If there is not sufficient available light for proper exposure at the slowest
shutter speed (selected automatically; page 10), a red warning SIGNAL, USE
FLASH, will appear in the viewfinder, as the shutter release is slightly depressed.
If flash is not appropriate, use the “B"” (Brief time) setting — the shutter opens
when the shutter release is fully depressed and closes when pressure is removed.
After cach “B" exposure the shutter setting moves automatically to 250
(1/250) and can easily be reset for another “B” exposure. The camera must be
on a solid support, such as a tripod, for these longer exposures.
To select a shutter setting, rotate the knurled shutter speed DIAL so that the
desired speed number or “B” clicks into place opposite the speed INDEX,
AUTOMATIC DAYLIGHT EXPOSURE CONTROL
The size of the lens opening is automatically controlled by the |
amount of light reflected to the ELECTRIC EYE by the scene. |
Make sure that the electric eye is not obstructed during picture-
taking by the fingers or any other object.
In weak light, when the lens opening has reached its largest |
opening (f/2.8) the shutter, regardless of the dial setting, auto-
matically begins to reduce speed (except at “B”) to give the cor-
rect exposure, as far as 1/30, if necessary. A red warning SIGNAL, USE FLASH,
will appear, as the shutter release is slightly depressed, in the right side of the
luminous frame of the viewfinder, if there is insufficient light for a property
exposed picture — this indicates use of either flash or a “B” exposure. Under
these low-light conditions, judge “B" exposure times on the basis of f/2.8.
Unusual Situations: In daylight pictures, when severe brightness differences
occur between the subject and the background and it is possible ro get close to
the subject, you can exclude the background by moving up to a place where
only the subject fills the finder, Then press down the shutter release, shown,
page 13, about 14 of the way (not far enough to release the shutter), continue
to hold the release in this position to maintain the closc-up exposure setting;
then step back, aim, and press the release down fully to take the picture.
Rangefinder Focusing—As you look through the view-
Top Mustration: Dou- finder, you will also notice a circular area in the center
ble image in range: of the field of view=this is the rangefinder field. Until
finder indicates out- the camera is focused for the correct camera-to-subject
of-focus subject. a |
pti rg НИЙ distance, this field shows a double image of the subject.
DAYLIGHT PICTURES
e Set the shutter speed. For general picturetaking, the
shuiter-speed setting may be left at 125.
e Focus the camera for the camera-to-subject distance
by using the rangefinder, symbols, or the footage
scale on the lens mount. bé Ln
1 LC EC ated, our eve €
image move together and coincide, so that only one > é do de pique ar ee utero fi the sub-
Fo
Single rangefinder To set the distance correctly, rotate the LENS MOUNT,
image means camara by its convenient ki ines
is properly focused. y 10b, until the outlines of the double
APDO TT VES Abe Neue de mc proies Room ject is framed by the luminous viewfinder. If, as the
shutter release is slightly depressed, the red warning
signal appears in the right side of the viewframe,
there's not sufficient light for proper exposure. How-
ever, flash can be used for close subjects or a “В”
exposure for à still subject.
+ ; e Hold the camera steady and take the picture by slow-
Le ly pressing the SHUTTER RELEASE all the way down.
| e With the spring motor wound, film advances auto-
matically to the next frame when pressure is re-
moved from the shutter release.
Scale Focusing—You can also focus by turning the lens
mount until the figure representing the camera-to-sub-
ject distance in feet (or symbol for CLOSE-UP, GROUP,
Or SCENE) 15 opposite the focusing MARK.
Live wy |
т | INS В MATIC 014
‚AMERA
SHUTTER
RELEASE
13
FLASH PICTURES
Your camera features easy, rapid flash
picturetaking with the rotating flash-
cube, and automatic flash control—the
correct lens opening is automatically
set as you focus for the camera-to-
subject distance. The rotating flashcube
incorporates 4 blue bulbs (for all films),
reflectors and flashguards.
* For color prints, use KobAcoLor-X
Film.
* For color slides, use KODACHROME-X,
KODAK EKTACHROME-X, or High
Speed EKTACHROME Film.
® For black-and-white prints, use Konak
VERICHROME Pan Film.
TAKING FLASH PICTURES
a Insert Flashcube—Insert the base of the FLASHCUBE
into the socket on the top of the camera; then press
down the flashcube until it snap-locks in place with
one of its four sides facing forward in its detent (click-
stop) position. If a fresh bulb is in the frontal firing
position, à FLASH READY SIGNAL appears in the left side
of the viewframe as the shutter release is slightly de-
pressed. Absence of this signal indicates that the cube
is not detented in its frontal firing position or that a
used bulb is in the forward position. Also, a dim signal
or no signal can indicate that batteries should be
checked and possibly replaced. The Use FLASH signal
may or may not appear, depending on the amount of
illumination present.
The cube revolves* one quarter turn (clockwise) each time the film advances
to the next exposure, thus providing flash for 4 exposures if a fresh cube is in
place. If a
partially used cube is in place, a fresh bulb must face forward; if a
second fresh bulb is facing toward the Kodak nameplate on top of the camera,
it will rotate into position as film i$ advanced. The cube can also be rotated by
*IMPORTANT: Do not obstruct rotation of the flashcube.
15
hand to bring any fresh bulb to its frontal firing position.
Remove a flashcube by lifting it out of the socket.
* Set Distance— Rotate the lens mount until the two rangefinder images coin-
cide, or until the figure representing the camera-to-subject distance in feet is
opposite the focusing mark. Distance limit, 25 feet for flash.
s View Subject—Look through the eyepiece and compose the picture within the
luminous viewframe of the viewfinder.
* Take Picture—Hold the camera steady and slowly press the shutter release to
flash the bulb* and take the picture.
AUTOMATIC FILL-IN FLASH
When flash is used in combination with available light (fill-in flash) the elec-
tric eye determines the lens opening on the basis of available light at 1/40
second, and the flash exposure control determines the lens opening on the
basis of the distance setting in the 3 to 25 foot range. The smaller of the two
openings 15 automatically set when taking the picture. At short subject dis-
tances or relatively low available light levels, fill-in flash will produce better
lighted pictures, especially of side- or back-lighted subjects.
*Flash failure usually results from tarnish (often invisible) on battery and camera con-
tacts. Clean battery and battery clip contacts with a rough cloth. Clean recessed contacts
in battery compartment by rotating a pencil eraser several times against the contacts, If
flash failure persists after cleaning, install fresh batteries,
18
CARE OF THE CAMERA
Your KODAK INSTAMATIC is a
fine, ragecdly built camera, but
yet a precision instrument. Pro-
tect it from dust and dirt and
avoid rough handling, Use a rub-
ber syringe to blow out any dust
that may accumulate inside the
camera. If the lens needs clean-
ing, first brush or blow away any
grit or dust, then wipe the surface
gently with Konak Lens Cleaning
Paper. If necessary, use KODAK
Lens Cleaner.
Do not attempt to make any
repairs or remove any parts from
the shutter, lens, or camera.
Never oil the shutter or any other
parts of the camera.
GUARANTEE
Within a year after purchase, any repairs
necessary to this KODAK INSTAMATIC Camera
due to a defect in materials or workman.
ship will be made or, at our option, the cam-
era will be replaced without charge. No other
warranty or guarantee, express or implied,
shall be applicable to this equipment. Nor are
we responsible for loss of film, for other ex
penses or inconveniences, or for any conse:
quential damages occasioned by the equip:
ment.
In case of a defect, the camera can be
sent directly or through a Kodak dealer to
Eastman Kodak Company or a repair firm
authorized by us to make such repairs.® It
should be accompanied by a description of
the trouble encountered and other available
information regarding the camera, including
the date and place of purchase.
"Kodak service facilities, with addresses, are
described on the following page.
EASTMAN KODAK COMPANY
Rochester, New York 14650
If your Kodak camera should
require attention, complete
service facilities are provided
at Rochester and in Kodak
Regional Sales Divisions at
the addresses opposite. Also,
service covered under the
guarantee is available
through independent service
shops in many cities. For
such local, guarantée-covered
sarvice, please See your
Kodak dealer or refer to the
yellow pages of your tele
phone directory under Photo-
graphic Equipment and Sup
plies—Factory Approved War-
ranty Service,
SERVICE FACILITIES—
Eastman Kodak Company
Apparatus Service
800 Lee Road
Rochester, New York 14650
Eastman Kodak Company
Apparatus Service
1901 West 22nd Street
Jak Brook, Iilinois 60523
Eastman Kodak Company
Apparatus Service
1400 Hi Line Drive
Dallas, Texas 75207
Eastman Kodak Company
Apparatus Service
5315 Peachtree
Industrial Blvd,
Chamblee, Georgia 30005
Eastman Kodak Company
Apparatus Service
3250 Van Mess Avenue
San Francisco, California 94119
Eastman Kodak Company
Apparatus Service
1334 York Avenue
Mew York, Mew York 10021
Eastman Kodak Company
Apparatus Service
12100 Rivera Road
Whittier, California 40606
Eastman Kodak Company
Apparatus Service
1065 Kapiolani Blvd,
Honolulu, Hawaii 96807
19
">