Kodak Instamatic 704 Instructions
Kodak Instamatic 704 is a versatile camera that offers automatic exposure control, flash control, and focusing, making it easy to capture sharp and well-lit photos in various conditions. It features a 38mm f/2.8 lens for clear images, a shutter with speeds from 1/60 to 1/250 seconds, and a built-in socket for 4-bulb Flashcube. The camera accepts all Kodak No. 126 films, allowing you to shoot black-and-white snapshots, color snapshots, or color slides. It also has an illuminated viewfinder with parallax marks and distance-setting scale for precise focusing.
PDF
سند
تبلیغات
تبلیغات
DETAILS
Film
+ Film Size—Kooak Mo. 126 In the KODAPAK
Cartridge; 12- or 20-exposuré.
a Negative Size—28 x 28mm.
Lens—38mm, f/2.8 KODAK EXTANAR
® Lens Openings —1/2.8 through 1/64 — sel
by automatic exposure controls.
a Focusing Range—3 feet to infinity,
a Lens Altachments—Series 5. Ring
supplied.
shutter—Automatically set
e Speeds—1/60, 1/125, 1/250: plus 1/30,
set by exposure control and for flash. Also
"В" бог brief time exposures.
Viewfinder
a Optical, projected viewframe-type with
parallax marks for 5 feet.
a Handy distancé-setling scale for Close:
Ups, Groups, and Scenes.
® Hluminated signals for insufficient light
and flash readiness.
Automatic Daylight Exposure Control
E Film speed is set automatically by film
cartridge {ASA 25 to 800).
EASTMAN KODAK COMPANY -
Pt, Mo, 633042
2.0 5-CH-AE
a Lens openings set automatically Бу
electric eye.
+ Automatic shutter control reduces speed
after maximum lens opening is reached,
Automatic Flash Control
a Guide number ls set automatically by film
cartridge (40 to 228),
« Built-in socket for 4-bulb Flashcube.
a Correct lens opening is set automatically
by focusing.
@ Flash shutter speed (1/30 sec.) la set
automatically by Inserting Flashcube.
a Uses 2 N-size batteries.
Other Features
@ Instant Loading and Unloading.
a Single-Stroke Film Advance.
@ Automatic Double Exposure Prevention,
@ Exposure Compensation.
a Tripod Socket,
a Eyelet for nackstrap (supplied).
® Die-cast metal body; black and satin
chrome finish.
Rochester, New York 14650
Printed in The United States of Americ
704
WL
KODAK
INS TAMATI
E
Your Konak INSTAMATIC 704 Camera — with f/2.8
lens, fast-action shutter, automatic electric-eye expo-
sure setting, automatic flash control, illuminated finder
signals, and automatic flashbulb advance with the new
Flashcube—is one of the most distinguished members
of the KODAK INSTAMATIC family.
Simply do this...
e Drop in KODAPAK Cartridge—camera is loaded
e Operate Film Advance Lever—first exposure is ready
e Set for CLOSE, GROUP, or SCENE —camera is
focused
eo Aim through Viewfinder and press Shutter Release
—you've taken the picture
. « . read on for the details
Kodachrome
TRANSPARENCY
PROCESSED AY
Kodak
< Your camera takes
all thres—
1 Black-and-white
snapshots
2 Color snapshots
3 Color slides
Before making any
important pictures—
of a trip or some
special event = it is
well to shoot à car-
tridge of film out-
doors, and indoors
with flash. This will
give you practice in
camera operation
and provide a check
on your equipment.
3
FILM
Your camera accepts all Kopak No.
126 Films in the Koparak Cartridge
for instant camera loading and un-
loading.
You can make black-and-white
snapshots, color snapshots, or color
slides, depending on which film type
15 loaded in the camera.
Kopaxk VERICHROME Pan Film, VP 126 В
Корлсонов-Х. Рйт, СХ 126 № |
KopacHrome-X Film, KX 126 №
Kooax Extachaome-X Film, EX 126 Jp
For 12 black-and-white snapshots. Standard enlarged
black-and-white prints from vour negatives are 314 x
314 inches in size, Bigger enlargements are also avail-
able.
For 12 color snapshots. Standard enlarged color prints
are 314 x 314 inches in size. Color slides, as well as
bigger color enlargements, are also available.
For 20 color slides. These color pictures on film are
framed in 2 x 2-inch mounts, for showing in slide pro-
jectors.
For 20 color slides. Can be processed by the user or by
a laboratory. These color pictures on film are usually
framed in 2 x 2-inch mounts, for showing in slide pro-
Jéctors.
Films, processing, printing, and mounting service, can
be obtained from your photo dealer.
NOTE:
You always obtain color
négatives from HKonacot-
OR-X Film, These negatives
are primarily for enlarged
color prints, but you can
also obtain color slides
from the negatives. From
KODACHAROME-X or Коолк
EKTACHROME-X, you obtain
color slides, ready for pro-
jection. You can also have
duplicate slides or en-
larged color prints made
from the original slides.
LOADING
Open the back of the cam-
era by sliding the Lock but-
ton down to pop open the
hinged cover; then swing
out the cover, as far as it
will go, until it “click-stops"’
approximately perpendicu-
lar to the camera.
6
Place a Konarax Cartridge
in the camera, as illus-
trated, with the larger cylin-
drical end down and toward
the lock button.
Close the back of the cam-
era by pressing the back
against the body until it
locks. The film name and
number of exposures per
cartridge appear in the WIN-
pow on the back of the
camera. The film speed and
flash guide number are now
automatically set.
aL ri
LS
im
|" mm:
Eo mE
ATT re “RTE =
TU
r= =
= al
Вет L FA
si
{ FILM ADVANCE
HE Vo PTI SE
rome 1 = 1 COUNTER E
i a
1 pa = 3
Slide the FILM ADVANCE lever as far as it will go toward the
right, and allow it to return; repeat until the lever locks (about
8 full strokes). The appearance of a series of arrows In the
center of the window indicates that the film is advancing to-
ward the first exposure. After each picture, operate the film
advance lever one full stroke (or several short strokes until the
lever locks) to advance the film.
The number that appears in the center of the window on the
back of the camera (shown above, right) serves as your expo:
sure COUNTER, The same number may appear in duplicate.
UNLOADING
1. After the last picture, operate
the film advance lever until it locks,
before you open the back of the
camera. The appearance of an "XxX"
in the center window indicates that
the film has been exposed, but that
the backing paper has not been
wound into the take-up chamber.
2. Slide down the lock button:
open the back.
3. Remove the cartridge by turning
the camera over to allow the car-
tridge to fall into your hand. Close
the back. For processing. send
entire cartridge.
NOTE:
Do not remove the cartridge from
the camera until all the yellow pa-
per, with the "As, has been moved
past the window, otherwise several
exposures will be *light-fogged."”
Removing and replacing partially-
exposed cartridges, even under
darkroom conditions, may result In
loss of one exposure,
SHUTTER SETTING
Your camera has four manually
adjustable shutter settings — 60
(1/60 sec.), 125, 250, and “В” —
plus 1/30, which is automatical-
ly selected for flash by inserting
the FLASHCUBE in the socket. A
shutter speed of 1/125 (125) is ae eee
recommended for general daylight 9% retaking: the faster speed (250) is use-
ful to minimize the effect of subject or camera movement, while the slower
speed (60) can be used for less favorable light conditions.
If there is not sufficient available light for proper exposure at the slowest
shutter speed (selected automatically; page 9), a red warning SIGNAL, USE
FLASH, will appear in the viewfinder, as the shutter release is slightly depressed.
If flash 1s not appropriate, use the “B” (Brief time) setting — the shutter opens
when the shutter release is fully depressed and closes when pressure is removed,
After each “B” exposure the shutter setting moves automatically to 250
(1/250) and can easily be reset for another "B” exposure. The camera must be
on a solid support, such as a tripod for these longer exposures,
ELECTRIC EVE y
Em * * COMPENSATOR x |
To select a shutter setting, rotate the knurled shutter speed DIAL so that the
desired speed number or “B” clicks into place opposite the speed INDEX.
"AUTOMATIC DAYLIGHT EXPOSURE CONTROL
The size of the lens opening is automatically controlled by the
amount of light reflected to the ELECTRIC EYE by the scene.
Make sure hat the electric eye is not obstructed during picture-
faking by the fingers or any other abject, and that the camera is
not pointed directly toward the sun or other unusually bright
light saurce.
In weak light, when the lens opening has reached its largest
opening (f/2.8) the shutter, regardless of the dial setting, auto- SIGNAL
matically begins to reduce speed (except at “B”) to give the cor-
rect exposure, as far as 1/30, if necessary. A red warning SIGNAL, USE FLASH,
will appear, as the shutter release is slightly depressed, in the right side of the
luminous frame of the viewfinder, if there is insufficient light for a properly
exposed picture — this indicates use of either flash or a “B” exposure. Under
these low-light conditions, judge “B” exposure times on the basis of f/2.8.
NOTE: An exposure meter will be helpful in determining these longer exposure times at the
"B" setting.
10
Unusual Situations: Because the electric eye reads the over-all brightness of a
scene, better results sometimes can be obtained by altering the exposure when
there 15 considerable brightness difference between the subject and the back-
ground. If you wish to give one stop more exposure for a dark subject against
à larger light background, rotate and hold the knurled COMPENSATOR as far as
it will go toward the plus (+) sign while taking the picture; for a light subject
against a larger dark background, you can give one stop less exposure by rotat-
ing and holding the COMPENSATOR as far as it will go toward the minus (—)
sign, during exposure. The compensator resets to normal when released. This
exposure compensator can also be used with flash to give one stop more expo-
sure for a dark subject, or one stop less for a light subject.
Also, in daylight pictures, when severe brightness differences occur between
the subject and the background and ir is possible to get close to the subject,
you can exclude the background by moving up to a place where only the sub-
ject fills the finder. Then press down the shutter release, shown, page 13, about
Là of the way (not far enough to release the shutter), continue to hold the
release in this position to maintain the close-up exposure setting; then step
back, aim, and press the release down fully to take the picture.
VIEWING AND DISTANCE SETTING
Hold the camera close to your eye with the eye cen-
tered on the rear eyepiece so that the complete lumi-
nous viewframe is visible. The image seen within this
viewframe will be included in the picture, except at
short camera-to-subject distances. The two indicators
(one on each side) near the top of the frame, and the
one at the lower left, provide parallax correction at
a subject distance of about 5 feet. Therefore, when the
subject is at about this distance, aim the camera so
that the subject image is within this smaller area, as
outlined by the dotted lines in the illustration at left.
NOTE: Since the picture area Is square, there will be no format
advantage in holding the camera vertically.
11
Scale Distance Setting— Estimate the camera-to-subject* distance carefully and
rotate the LENS MOUNT by ils convenient knob until the figure representing the
camera-to-subject distance in feet is opposite the focusing MARK.
Handy, Zone Distance Setting—For quick distance setting while viewing the
subject, a symbol-type scale appears at the top of the luminous frame in the
viewfinder. Rotating the lens mount moves the INDICATOR to the left symbol
for CLOSE-UPS (4-foot range), middle symbol for GROUPS (9-foot range),
or right symbol for SCENES (25-foot range and beyond). Intermediate dis-
tances can be estimated on this scale.
*For precise measurement at the shorter subject distances, measure to the film plane marker
(-O-) on the top of the camera.
INDICATOR
io
OUTDOOR PICTURES
Set the shutier speed. For general picturetaking, the
shutter speed setting may be left at 125, —
Set the camera-to-subject distance by the symbol scale
in the finder, or the footage scale on the lens mount.
View the subject, as illustrated, with your eye close to
the rear opening of the viewfinder so that the subject
is framed by the luminous viewframe. If, as the shutter
release is slightly depressed, the red warning signal ap-
pears in the right side of the viewframe, there's not
sufficient light for proper exposure. However, Nash
can be used for close subjects, or a “B” exposure for a
still subject.
Hold the camera steady and take the picture by slowly
pressing the SHUTTER RELEASE all the way down.
Operate the film advance lever one full stroke. You
are ready for the next exposure.
NOTE: The shutter release cannot be depressed a second time
until the film advance lever has again been operated one full
stroke. This provides double exposure prevention.
FLASH PICTURES
Your camera features easy, rapid flash picturetaking with the new rotating
Flashcube, and automatic flash control — the correct lens opening is automati-
cally set as you focus for the camera-to-subject distance. The rotating Flash-
cube incorporates 4 blue bulbs (recommended for all films), reflectors and
flashguards.
e For color slides, use Konak EKTACHROME-X or KODACHROME-X Film.
# For color prints, use KopacoLor-X Film.
¢ For black-and-white prints, use Konak VERICHROME Pan Film.
Batteries: Two fresh photoflash or flashlight, N-size, batteries
(manganese alkaline recommended) are required.* Weak bat-
teries may cause flash failures. To install batteries, first open the
battery compartment on the bottom of the camera, as shown,
by inserting the thumbnail in the notch, pressing in the direc-
tion of the arrow, and swinging open the hinged COVER, Insert
the batteries — one base down; the other base up — as illus-
“4 trated. Close the cover securely.
*To insure dependable battery and camera service, clean battery contacts periodically with
a rough cloth. For maximum protection of camera contacts, batteries may be removed if
camera is stored.
TAKING FLASH PICTURES
e Insert Flashcube—Fit the hollow stem on the base of
the Flashcube over the center hub of the socket on the
top of the camera, so that the 4 wings of the Flashcube
stem enter the cross around the socket hub; then press
down the Flashcube until it snap-locks in place with
one of its four sides facing forward in its detent (click-
stop) position. If a fresh bulb is in the frontal firing
position, a FLASH READY SIGNAL appears in the left side
of the viewframe as the shutter release is slightly de-
pressed. Absence of this signal indicates that the cube
is not detented in its frontal firing position or that a
used bulb is in the forward position. Also, a dim signal
or no signal can indicate that batteries should be
checked and possibly replaced. The USE FLASH signal
may or may not appear, depending on the amount of illumination present.
The cube revolves* one quarter turn (clockwise) each time film is advanced
to the next exposure, thus providing flash for 4 exposures if a fresh cube is in
place. If a partially used cube is in place and film has been advanced, a fresh
* IMPORTANT: Do not obstruct rotation of Flashcube.
15
16
bulb must face forward; if film is to be advanced, make sure that a fresh bulb
15 facing toward the EJECTOR button, so that it will rotate into position as film
is advanced. The cube can also be rotated by hand to bring any fresh bulb to
its frontal firing position.
Press down the EJECTOR button (shown, page 15) to remove a Flasheube.
e Set Distance—Rotate the lens mount until the figure representing the camera-
to-subject distance in fect (up to 25 feet) is opposite the focusing mark.
e View Subject—Look through the eyepiece and compose the picture within the
luminous viewframe of the viewfinder.
e Take Picture—Hold the camera steady and slowly press the shutter release to
flash the bulb and take the picture.
AUTOMATIC FILL-IN FLASH
When flash is used in combination with available light (fill-in flash) the elec-
tric eye determines the lens opening on the basis of available light at 1/30
second, and the flash exposure control determines the lens opening on the
basis of the distance setting in the 3 to 25 foot range. The smaller of the two
openings is automatically set when taking the picture. At short subject dis-
tances or relatively low available light levels, fill-in flash will produce better
lighted pictures, especially of side- or back-lighted subjects.
PHOTO AIDS
You can extend your picturetaking scope and enjoyment with the photo aids
described below. Sec your Kodak dealer for these and others.
Kooak Instamatic Field Case, Model F—This attractively lined, molded case will provide
maximum camera protection. The special design permits instant picturetaking, load-
ing and unloading without removing the camera from its case, A KopaK INSTAMATIC
Compartment Case is available for carrying camera, film, bulbs, filters, ete.
Konak Lens Attachments—A removable ring is provided on the front of the lens mount
of your camera Lo retain a Series 5 Kopak Filter or other useful lens attachment.
For example: A Kopak Skylight Filter (No. 1A) adds warmth to color pictures taken
in the shade or on overcast days, and reduces bluish haze in landscape shots; Kobak
PORTRA Lenses can extend the camera's picturetaking range down to 10 inches,
portra lens-to-subject distance, with an approximate field size of 634 x 634 inches.
Merely unscrew the ring on the front of the lens mount, insert a filter or other
lens attachment; then screw the ring in place to hold the accessory,
Kopax Projectors—A Kopak Projector will show your color slides big, bright, and
sharp on the screen. Ask your dealer to see the revolutionary, fully-automatic Kopak
CarousiL Projector. Features round, 80-slide trays that change as quickly and easily
as a hi-fi record. Other features include remote focus, remote forward slide change,
remote reverse, instant editing and 500-wait power.
17
18
CARE OF THE CAMERA
Your KODAK INSTAMATIC 15 a
fine, ruggedly built camera, but
yet a precision instrument. Pro-
tect it from dust and dirt and
avoid rough handling. Use a rub-
ber syringe to blow out any dust
that may accumulate inside the
camera. If the lens needs clean-
ing, first brush or blow away any
grit or dust, then wipe the surface
gently with Kopak Lens Cleaning
Paper. If necessary, use KODAK
Lens Cleaner.
Do not attempt to make any
repairs or remove any parts from
the shutter, lens, or camera.
Never oil the shutter or any other
parts of the camera.
GUARANTEE
Within a year after purchase, any repairs
necessary to this KODAK INSTAMATIC Camera
due to a defect in materials or workman-
ship will be made or, at our option, the cam-
era will be replaced without charge. No other
warranty or guarantee, express or implied,
shall be applicable to this equipment. Mor are
we responsible for loss of film, for other ex-
penses or inconveniences, or for any conse-
quential damages occasioned by the equip-
ment.
In case of a defect, the camera can be
sent directly or through a Kodak dealer to
Eastman Kodak Company or a repair firm
authorized by us to make such repairs.* It
should be accompanied by a description of
the trouble encountered and other avallable
information regarding the camera, including
the date and place of purchase,
“Kodak service facilitles, with addresses, are
described on the following page.
EASTMAN KODAK COMPANY
Rochester, Mew York 14650
If your Kodak camera should
require attention, complete
servico facilities are provided
at Rochester and in Kodak
Regional Sales Divisions at
the addresses opposite. Also,
service covered under the
guarantee is available
through independent service
shops in many cities. For
such local, guarantee-covered
service, please see your
Kodak dealer or refer to the
yellow pages of your tele-
phone directory under Photo-
graphic Equipment and Sup-
plies—Factory Approved War-
ranty Service.
Eastman Kodak Company
Apparatus Service
800 Lee Road
Rochester, Mew York 14606
Eastman Kodak Company
Apparatus Service
1901 West 22nd Street
Oak Brook, Illinois 60523
Eastman Kodak Company
Apparatus Service
6300 Cedar Springs Road
Dallas, Texas 75235
Eastman Kodak Company
Apparatus Service
2315 Peachtree
Industrial Blvd.
Chamblee, Georgia 30005
SERVICE FACILITIES
Eastman Kodak Company
Apparatus Service
3250 Yan Ness Avenue
San Francisco, California 94119
Eastman Kodak Company
Apparatus Service
1334 York Avenue
New York, New York 10021
Eastman Kodak Company
Apparatus Service
508 Rivera Road
Whittier, California 20606
Eastman Kodak Company
Apparatus Service
1065 Kapiolani Bhd.
Honolulu, Hawaii 96807
19
">
/
دانلود
فقط یک یادآوری دوستانه. می توانید سند را درست در اینجا مشاهده کنید. اما مهمتر از همه، هوش مصنوعی ما قبلاً آن را خوانده است. این می تواند موارد پیچیده را به زبان ساده توضیح دهد، به سوالات شما به هر زبانی پاسخ دهد و به شما کمک کند به سرعت حتی طولانی ترین یا پیچیده ترین اسناد را پیمایش کنید.
تبلیغات