TomTom Navigator 7 Instructions

PDF

Hati

Tangazo

TomTom NAVIGATOR

1. Before You Start...

Setting up

To start using your phone as a navigation device, tap the TomTom button in the Windows Mobile start menu.

To set up your navigation device, you need to answer a few questions by tapping the screen.

Important : Take care to select the correct language, since the language you choose will be used for all menus and written instructions.

Activation

You will be asked how you want to activate the map that comes with

NAVIGATOR. There are two ways to do this:

• Automatically

To activate automatically, your device must have an active wireless data connection (GPRS, EDGE, UMTS or CDMA).

Tap Automatic , then enter your product code. The product code is printed on the product code card that is included with your product.

TomTom NAVIGATOR will connect to TomTom using the wireless data connection and activate the map.

• Manually

To activate a map manually, do the following:

1. Tap Manual .

2. Go to this website: www.ttcode.com

3. Follow the instructions on this page to get an activation code.

4. Enter the activation code on your device to activate the map.

Improving reception

If your TomTom NAVIGATOR takes longer than 5 minutes to find your current position, make sure that the device is in an open space away from tall objects such as buildings or trees.

Important : Some vehicles have heat reflective shielding in the windshield.

This may prevent your NAVIGATOR from locating your current position.

Switching on and off

To switch your TomTom NAVIGATOR on or off, press and hold the On/Off button for 2 seconds. The first time you switch on, it may take a short while for your device to start.

Note : In rare cases, your NAVIGATOR may not start correctly. If this happens, press the reset button, then switch on the device again.

To use your TomTom NAVIGATOR on your telephone, tap the NAVIGATOR button.

To close TomTom NAVIGATOR, tap Exit application in the Main Menu. We recommend that you close NAVIGATOR whenever you finish using the application, since some of the phone settings are managed by NAVIGATOR to enable you to place and receive phone calls while you are driving.

Exit application

Driving View

2. Driving View

When your TomTom NAVIGATOR starts, you are shown the Driving View along with detailed information about your current location.

Tap the center of the screen at any time to open the Main Menu.

Note : The Driving View is shown in black and white until your NAVIGATOR locates your current position.

Tap + and - to zoom in and out.

Quick menu - swich this on in the Preferences menu.

Your current position.

The name of the next major road or road sign information, if applicable.

Navigation instruction for the road ahead.

Tap this area to repeat the last spoken instruction and to change the volume.

The name of the street you are on.

Information about your trip such as trip time, remaining distance and arrival time.

To change the information shown, tap Status bar preferences in the

Preferences menu.

Traffic bar. For more information about how to subscribe to and receive

TomTom Traffic, go to tomtom.com/traffic .

To set up Traffic information, tap TomTom Traffic in the Main Menu.

3. Making your first trip

Planning a route with your TomTom NAVIGATOR is easy. To plan your first route, follow the steps below.

Important : You should always plan your journey before you start driving. It is dangerous to plan a route while driving.

1. Tap the screen to bring up the main menu.

Note : The buttons on your NAVIGATOR are shown in full color unless a button is currently unavailable. For example, the button named Find alternative...

in the Main Menu is not available until you have planned a route.

2. Tap Navigate to...

3. Tap Address .

When you enter an address, you can choose from the following options:

• City center - tap this button to set your destination as the center of a city or town.

• Street and house number - tap this button to set an exact address as your destination.

• ZIP code - tap this button to enter a ZIP code as your destination.

• Cross street or intersection - tap this button to set your destination as the point where two streets meet.

In this example, we will enter an exact address.

4. Tap Street and house number.

Note : When planning a trip for the first time your NAVIGATOR asks you to choose a state or country. Your choice is saved and used for all routes you plan.

You can change this setting at any time by tapping the state symbol or country flag.

5. Start to type the name of the town where you want to go.

As you type, the names of the towns that match what you have typed are shown. When your destination appears in the list, tap the name of the town to set the destination.

6. Start to type the name of the street and select it when it is shown.

As with the name of the town, the names of the streets that match what you have typed are shown. When your destination appears in the list, tap the name of the street to set the destination.

7. Now enter the house number of your destination and then tap Done .

8. Your NAVIGATOR asks if you need to arrive at a particular time. For this exercise, tap NO .

The route is calculated by your NAVIGATOR.

9. When the route has been calculated, tap Done .

Your NAVIGATOR will immediately begin to guide you to your destination, using both spoken instructions and on-screen directions.

Arrival times

When you plan a route, your TomTom NAVIGATOR asks you if you need to arrive at a particular time.

Tap YES to enter a preferred arrival time.

Your NAVIGATOR calculates your arrival time and shows you whether you will arrive on time.

You can also use this information to work out when you need to leave. If your

NAVIGATOR shows that you will arrive 30 minutes early, you can wait and leave in 30 minutes time, rather than arrive early.

Your arrival time is constantly recalculated during your trip. The status bar shows whether you will arrive on time or if you are going to be late, as shown below:

You will arrive 55 minutes before the arrival time you entered.

If the estimated arrival time is more than five minutes before the time you entered, it is shown in green.

You will arrive 3 minutes before the arrival time you entered.

If the estimated arrival time is less than 5 minutes before the time you entered, it is shown in yellow.

You will arrive 19 minutes late.

If the estimated arrival time is later than the time you entered, it is shown in red.

Status bar preferences

Tap Status bar preferences in the Preferences menu, to enable or disable arrival time notifications.

Select the required options on the first menu screen and then tap Done .

To enable arrival time notifications, select Show leeway to arrival time .

What are the other navigation options?

When you tap Navigate to...

, you can set your destination in many ways, not just by entering the address. The other options are listed below:

Tap this button to navigate to your Home location.

You will probably use this button more than any other.

Home

Tap this button to select a Favorite as your destination.

Favorite

Tap this button to enter an address as your destination.

1 2

2 3

Address

Tap this button to select your destination from a list of places you have recently used as destinations.

Recent destination

Tap this button to navigate to a Point of Interest (POI).

Point of

Interest

Tap this button to select a point on the map as your destination using the map browser.

Point on map

Tap this button to enter a destination using latitude and longitude values.

Latitude

Longitude

Tap this button to navigate to the last known position of a TomTom Buddy.

Don’t forget that the Buddy may move before you reach him.

TomTom

Buddy

Tap this button to navigate to the address of a contact on your device.

Contact

Planning a route in advance

You can also use your NAVIGATOR to plan trips in advance by selecting both your starting point and your destination. You could, for example, do the following:

• Find out how long a trip is going to take before you start.

• Check the route of a trip you are planning.

• Check a route for someone who is coming to visit you so you can explain the route to them.

To plan a route in advance, follow these steps:

1. Tap the screen to bring up the main menu.

2. Tap the arrow button to move to the next menu screen and tap Prepare route .

Prepare route

3. Select the starting point for your trip in the same way that you would select your destination.

4. Set the destination for your trip.

5. Choose the type of route that should be planned.

• Fastest route - the route which takes the least time.

• Shortest route - the shortest distance between the locations you set. This may not be the quickest route, especially if the shortest route is through a town or city.

• Avoid f reeways - a route which avoids freeways.

• Walking route - a route designed for making the trip on foot.

• Bicycle route - a route designed for making the trip on a bicycle.

• Limited speed - a route for a vehicle which can only be driven at a limited speed. You have to specify the maximum speed.

6. Your TomTom NAVIGATOR plans the route between the two locations you selected.

More information about a route

You can access these options for the route you last planned by tapping View route in the Main Menu or the Details button on the route summary screen.

You can then select from the following options:

Tap this button for a list of all the turn instructions on the route.

This is very useful if you need to explain a route to someone else.

Browse as text

Browse as images

Tap this button to see each turn in the trip. Tap the right and left arrows to move forwards and backwards through the trip.

Tap the screen to turn off the 3D display and view the map from above.

Tap this button to see an overview of the route using the map browser.

Browse map of route

Tap this button to open the route summary screen.

Show route summary

4. Finding alternative routes

Once you have planned a route, you may want to change something about the route, without changing your destination.

Why change the route?

Maybe for one of these reasons:

• You can see a roadblock or a line of traffic ahead.

• You want to travel via a particular location, to pick someone up, stop for lunch or fill up with gas.

• You want to avoid a difficult intersection or a road you don’t like.

Find alternative...

Tap Find alternative...

in the Main Menu to change the route that is currently planned.

Then tap one of the options below.

Calculate alternative

Avoid roadblock

Tap this button to calculate an alternative to the route already planned.

Your NAVIGATOR will look for another route from your current location to your destination.

If you decide you would prefer to use the original route after all, tap

Recalculate original .

Why would I need to do this?

Apart from the roads near your position and near your destination, the new route will use totally different roads to reach your destination. This is an easy way of calculating a totally different route.

Tap this button if you can see a roadblock or a line of traffic ahead. You then have to choose how much of the route ahead you want to avoid.

Choose from the different options: 100m, 500m, 2000m, 5000m. Your

NAVIGATOR will recalculate your route avoiding the section of the route for the distance you selected.

Don’t forget that once a new route is calculated, you may have to turn off the road you are on very soon.

If the roadblock suddenly clears, tap Recalculate original to return to your original route.

Travel via...

Tap this button to change your route so that it passes a particular location, perhaps to pick someone up on the way.

You choose the location you want to pass in the same way as you choose a destination. So you can select from all the same options: for example,

Address , Favorite , Point of Interest and Point on map .

Your NAVIGATOR will calculate a new route to your destination that passes the location you chose. Unlike your final destination, your NAVIGATOR does not inform you when you pass by this location.

Using this button, you can only travel via one location. If you want to pass more than one, use an Itinerary.

Tap this button to return to the original route without deviations to avoid roadblocks or traveling via particular locations.

Recalculate original

Avoid part of route

Tap this button to avoid a part of the route. Use this button if you see that your route includes a road or junction you don’t like, or which is wellknown for traffic problems.

You then choose the road you want to avoid from a list of the roads on your route.

Tap this button to recalculate your route so that it avoids traffic problems as much as possible. Your NAVIGATOR will check if there are any traffic problems on your route and work out the best route to avoid the problems.

Minimize delays

Note : This button is only available with TomTom Traffic enabled.

5. Help me!

Help me! provides an easy way to navigate to emergency services centers and other specialist services and contact them by phone.

For example, if you are involved in a car accident, you could use Help me! to call the nearest hospital and tell them your exact location.

How do I use Help me! to call a local service?

You can use Help me! to find and make contact with a service center.

When you select a service center, your current location and the phone number of the POI are shown.

To use Help me! to locate a service center, contact the center by phone and navigate from your current location to the center, do the following:

1. Tap the screen to bring up the main menu.

2. Tap Help me!

3. Tap Phone for help .

4. Select the type of service you require, for example, Nearest hospital.

5. To dial, select a center from the list, the nearest is shown at the top of the list.

Once the call is answered your NAVIGATOR shows your position on the map along with a description of the location. This helps you explain where you are while making a call.

6. To navigate your way to the center on foot, tap Walk there .

Your NAVIGATOR starts guiding you to your destination.

Options

Phone for help

Use your TomTom NAVIGATOR to find the location of a service and the contact details.

• Emergency services

• Emergency breakdown services

• Nearest police station

• Nearest doctor

• Nearest hospital

• Nearest public transport

• Nearest car repair services

• Nearest dentist

• Nearest pharmacy

• Nearest vet

Note : In some countries, information may not be available for all services.

Drive to help

Use your TomTom NAVIGATOR to navigate your way by road to a service center.

• Nearest car repair services

• Nearest hospital

• Nearest doctor

• Nearest police station

• Nearest pharmacy

• Nearest dentist

Note : In some countries, information may not be available for all services.

Walk to help

Use your TomTom NAVIGATOR to navigate your way on foot to a service center.

• Nearest gas station

• Nearest public transport

• Nearest police station

• Nearest pharmacy

• Home

• Nearest doctor

Note : In some countries, information may not be available for all services.

Where am I?

Your TomTom NAVIGATOR shows your current location.

You can then tap Phone for help to select the type of service you want to contact.

Tap this button to read the British Red Cross First Aid guide.

First Aid

Guide

Tap this button to read a selection of useful guides.

Other guides

Browse map

6. Browse map

To look at the map in the same way as you might look at a traditional paper map, tap Browse map in the Main Menu.

You can move the map by touching the screen and moving your finger across the screen.

The scale bar

Your current position.

GPS button

Tap this button to center the map on your current position.

Options

The cursor

The Find button

Tap this button to find specific addresses.

The Cursor button

Tap this button to navigate to the cursor position, make a Favorite of the cursor position, or find a Point of Interest near the cursor position.

The zoom bar

Zoom in and out by moving the slider.

Cursor button

You can use the cursor to find addresses and Points of Interest (POIs), for example, restaurants, train stations and gas stations.

Position the cursor over a location on the map, then tap one of the following buttons:

Tap this button to navigate to the cursor position. Your NAVIGATOR will calculate the route.

Navigate there

Find POI nearby

Tap this button to find a POI near the cursor position. For example, if you have found a restaurant to go to, you can search for a parking garage nearby.

Tap this button to create a Favorite at the cursor position.

Add as

Favorite

Tap this button to create a POI at the cursor position.

Add as POI

Tap this button to correct the location shown at the cursor position.

Correct location

7. TomTom Map Share

TomTom Map Share TM is a free service that lets you make updates to your map and if you want to, share those updates with other members of the

TomTom Map Share community.

If you find a street that has recently been blocked to traffic but was open before, you can use Map Share to update your map and then share the update with other Map Share members.

You can use Map Share to send and receive map updates during the first year after the map’s release date. This means that one year after the release date, you will no longer be able to send or receive map updates for that version of the map - You will still be able to make updates to your own map for use on your own device.

When you join the TomTom Map Share community you can keep your maps up-to-date with the latest updates made by other Map Share community members.

You choose the type of updates you want and each time you connect your

TomTom NAVIGATOR to TomTom HOME, the map is automatically updated.

TomTom Map Share community

To join the Map Share community, do the following:

1. Tap Map corrections in the Main Menu.

2. Tap Download corrections made by others .

3. Tap Join .

When you connect your TomTom NAVIGATOR to computer, TomTom HOME automatically downloads any available map updates and sends any changes you have made, to the Map Share community.

Map updates

There are two types of map update:

• Updates that are immediately shown on the map. These include, changing the traffic flow of a street, blocking or renaming a street and adding or editing POIs.

This type of change is immediately shown on your own map. You can hide these updates at any time in the Map Share preferences menu.

• Updates that are reported to TomTom but not shown immediately on your map. These include, missing streets, errors in freeway entrances and exits and missing roundabouts.

This type of update is investigated by TomTom and once verified, is included in the next map release. These updates are therefore not shared with the Map

Share community.

Making a map update

Correct a map error

1. Tap Map corrections in the Main Menu.

2. Tap Correct a map error .

A list of possible map updates is shown.

3. Select the type of update you want to report.

Note : If you tap Add missing POI or Report other error you will be asked for some additional information before the next step.

4. Select the method you want to use for selecting the location of the update.

5. When you have found the location, tap Done .

6. Enter update or confirmation of update now.

Marking a map error while on the move

If you notice an item on your map that needs attention, you can mark the location using the Report button and then enter the details when you are no longer driving.

To show the Report button in the Driving View, do the following:

1. Tap Map corrections in the Main Menu.

2. Tap Correction preferences .

3. Tap Done and then tap Done again.

4. Select Show report button , then tap Done .

The Report button is shown on the left-hand side of the Driving View. After you mark a location, you can add more information about the change when you open the Map corrections menu.

For example, you are driving to a friend's house and you notice that the name of the street you are on is different from the one on your map. To report the change, tap the Report button and your NAVIGATOR will save your current location. You can then send the update to TomTom Map Share when you have finished your trip.

Receiving the latest map updates

When you connect your TomTom NAVIGATOR to your computer, TomTom

HOME automatically downloads any available map updates and sends any changes you have made, to the Map Share community.

There are several types of updates which can be set in the Correction preferences menu.

Changing my preferences for map updates

Correction preferences is used to set the way TomTom Map Share runs on your device.

You can set the following preferences:

• Choose what types of updates you want to use on your maps.

• Decide if you want to share your updates with others.

• Show or hide the Report button in the Driving View.

To set your preferences, do the following:

1. Tap Map corrections in the Main Menu.

2. Tap Correction preferences .

A list of update types is shown.

3. Tick the box next to each update type you want use.

4. Tap Done .

5. Choose how you want to share your map updates with the Map Share community, then tap Done .

6. Choose if you want to see the Report button in the Driving View.

7. Tap Done .

Tip : If you later decide you want to remove updates from the map, clear the checkbox next to the types of update you want to remove. If you clear all the checkboxes, your map returns to the original state before the first update.

Map update categories

There are several types of update that you can make to a map.

(Un)block street

To make an update to your map, tap Map corrections in the Main Menu then tap Correct a map error . The following types of updates are shown.

Tap this button to block or unblock a street. You can block or unblock the street in one or both directions.

For example, to correct a street near to your current location, do the following:

1. Tap (Un)block street .

2. Tap Near you to select a street near your current location. You can select a street by name, a street near your Home location or a street on the map.

3. Select the street or section of a street you want to correct by tapping it on the map.

The street you select is highlighted and the cursor shows the name of the street.

4. Tap Done .

Your device shows the street and whether the traffic is blocked or allowed in each direction:

Reverse traffic direction

5. Tap one of the direction buttons to block or unblock the flow of traffic in that direction.

6. Tap Done .

The next time you connect your device to TomTom HOME, your updates are shared with the TomTom Map Share community.

Tap this button to correct the traffic direction of a one-way street, where the direction of traffic is different to the direction shown on your map.

Note : Reverse traffic direction only works for one-way streets. If you select a two-way street you will be given the chance to block/unblock the street rather than changing the direction.

vabckc sdn sdjvfbks vk

Edit street name

Add missing

POI

Edit POI

Report other error

Tap this button to change the name of a street on your map.

For example, to rename a street near to your current location:

1. Tap Edit street name.

2. Tap Near you .

3. Select the street or section of a street you want to correct by tapping it on the map.

The street you select is highlighted and the cursor shows the name of the street.

4. Tap Done .

5. Type the correct street name.

6. Tap Done .

Tap this button to add a new Point of Interest (POI).

For example to add a new restaurant near to your current location:

1. Tap Add missing POI .

2. Tap Restaurant in the list of POI categories.

3. Tap Near you .

4. Select the location of the missing restaurant.

You can select the location by entering the address or by selecting the location on the map. Select Near you or Near home to open the map at your current location or at your Home location.

5. Tap Done .

6. Type the name of the restaurant then tap OK .

7. If you know the telephone number of the restaurant you can type it, then tap OK .

If you don’t know the number, just tap OK without typing a number.

Tap this button to edit an existing POI.

You can use this button to make the following changes to a POI:

• Delete the POI.

• Rename the POI.

• Change the telephone number of the POI.

• Change the category that a POI belongs to.

• Move the POI on the map.

Tap this button to report other types of update.

These updates are not immediately corrected on your map. Your

TomTom NAVIGATOR sends a special update report to TomTom Map

Share.

You can report missing streets, errors in freeway entrances and exits and missing roundabouts. If the update you want to report is not covered by any of these report types, enter a general description then tap Other .

8. Favorites

What are Favorites?

Favorites are places that you often visit. You can create Favorites so that you don’t have to enter the address every time you want to navigate there.

They don’t have to be places you especially like, just useful addresses.

How can I create a Favorite?

From the Main Menu, tap Add Favorite .

Note : The button Add Favorite may not be shown on the first page of the Main

Menu. Tap the arrow to open other pages in the Main Menu.

You can then select the location of the Favorite from the list below.

Give your Favorite a name that is easy to remember. Your NAVIGATOR will always suggest a name, usually the address of the Favorite. To enter the name, just start typing. You don’t have to delete the suggested name.

You can set your Home location as a Favorite.

Home

You cannot create a Favorite from another Favorite. This option will always be unavailable in this menu.

To rename a Favorite, tap Manage Favorites in the Preferences menu.

Favorite

1 2

2 3

Address

You can specify an address to be a Favorite. When you enter an address, you can choose from four options.

• City center

• Street and house number

• ZIP code

• Crossing or intersection

Select a Favorite location from a list of places you have recently used as destinations.

Recent destination

Point of

Interest

You can add a Point of Interest (POI) as a Favorite.

Does it make sense to do this?

If you visit a POI you particularly like, for example a restaurant, you can add it as a Favorite.

To add a POI as a Favorite, tap this button, then do the following:

1. Narrow your choice of POIs by selecting the area where the POI is.

You can select one of these options:

• POI near you - to search from a list of POIs near your current position.

• POI in city - to choose a POI in a particular town or city. You have to specify a town or city.

• POI near Home - to search from a list of POIs near your Home location.

If you are currently navigating to a destination, you can also select from a list of POIs which are on your route or near your destination. Choose one of these options:

• POI along route

• POI near destination

2. Select the category of POI.

Tap the category of POI if it is shown or tap the arrow to choose from the complete list.

Tap Any POI category to search for a POI by name.

Tap this button to add your current position as a Favorite.

For example, if you stop somewhere interesting, while you are there you can tap this button to create the Favorite.

My location

Point on map

Tap this button to create a Favorite using the map browser.

Select the location of the Favorite using the cursor, then tap Done .

Tap this button to create a Favorite by entering latitude and longitude values.

Latitude

Longitude

Tap this button to create a Favorite of the current position of a TomTom

Buddy.

TomTom

Buddy

Tap this button to create a Favorite using the address of a contact on your device.

Contact

How can I use a Favorite?

You will normally use a Favorite as a way of navigating to a place without having to enter the address. To navigate to a Favorite, do the following:

1. Tap the screen to bring up the main menu.

2. Tap Navigate to...

3. Tap Favorite .

4. Select a Favorite from the list.

Your NAVIGATOR calculates the route for you.

5. When the route is calculated, tap Done .

Your NAVIGATOR will immediately start guiding you to your destination with spoken instructions and visual instructions on the screen.

How can I delete a Favorite?

1. Tap the screen to bring up the main menu.

2. Tap Change preferences to open the Preferences menu.

3. Tap Manage Favorites .

4. Tap the Favorite you want to delete.

5. Tap Delete .

How can I change the name of a Favorite?

1. Tap the screen to bring up the main menu.

2. Tap Change preferences to open the Preferences menu.

3. Tap Manage Favorites .

4. Tap the Favorite you want to rename.

5. Tap Rename .

9. Points of Interest

Points of Interest or POIs are useful places on the map. Here are some examples:

• Restaurants

• Hotels

• Museums

• Parking garages

• Gas stations

Showing POIs on the map

1. Tap Show POIs on map in the Preferences menu.

Show POI on map

2. Select the POI categories to display on the map.

Tap Find to search for a POI by name.

3. Tap Done .

The POIs you have selected are shown as symbols on the map.

Calling a POI

Your TomTom NAVIGATOR knows the phone numbers for many POIs. You can, for example, call a restaurant to book a table.

To call a POI, tap Call POI in the Main Menu.

Navigating to a POI

You can use a POI as your destination. For example, if you are traveling to an unfamiliar city, you could choose a POI to help find a parking garage.

1. Tap the screen to bring up the main menu.

2. Tap Navigate to...

in the Main Menu.

3. Tap Point of Interest .

4. Tap POI in city .

5. Narrow your choice of POIs by selecting the area where the POI is located.

You can select one of these options:

• POI near you - to choose from a list of POIs near to your current location.

• POI in city - to find a POI in a particular town or city.

• POI near Home - to choose from a list of POIs near to your Home location.

You can select from a list of POIs which are along your route or close to your destination. Choose from one of these options:

• POI along route

• POI near destination

Note : The last POI you viewed is also shown so that you can plan a route there more quickly.

6. Type the name of the town you want to visit and select the town when it appears in the list.

7. Select the category of POI:

Tap Any POI category to search for a POI by category name.

Tap the category of POI, if it is shown.

Tap the arrow to choose from the complete list of categories. Select the category from the list or start to type the name of the category and select it when it appears in the list.

8. Tap Parking garage .

9. From the list of POIs shown, select the POI you want to navigate to.

The table below explains the distances listed next to each POI.

POI near you

POI in city

Distance from your current location

Distance from the city center

POI near Home Distance from your Home location

POI along route

Distance from your current location

POI near destination

Distance from your destination

If you know the name of the POI, tap Find and type the name. Select it from the list when it is shown.

The next screen shows more detailed information including the location of the POI on the map and the phone number of the POI, if available.

Tap Select to confirm you want to plan a route to this POI.

Once you have selected a POI, the route to the POI is calculated by your

TomTom NAVIGATOR.

Managing POIs

Tap Manage POIs from the Preferences menu.

Manage POIs

You can, for example, do the following:

• Create your own POI categories and add POIs to them.

• Set warnings when you get close to POIs.

Why would I want to create my own POIs?

A POI acts like a shortcut - once you have saved a location as a POI you never have to type the address of that POI again. But when you create a POI you can save more than just the location.

• Phone number - when you create a POI, you can save a phone number with it.

• Categories - when you create a POI you have to put it in a category.

For example, you could create a category of POIs called ‘Favourite restaurants’. With each POI, save the phone number so that you can call them from your NAVIGATOR to reserve a table.

For example, you could create a category of POIs called ‘Favourite restaurants’. With each POI, save their phone number so that you can call them to reserve a table.

How can I create my own POIs?

1. Tap the screen to bring up the main menu.

2. Tap Change preferences .

3. Tap Manage POIs .

4. Before you can add a POI, you have to create at least one POI category.

Every POI is assigned to a POI category. You can only add POIs to POI categories you have created yourself.

Tap Add POI category .

Add POI category

5. Enter a name for your POI category, for example, ‘Friends’ or ‘Favourite restaurants’. Then select a marker for your POI category.

6. Tap Add POI .

Tap this button to add a POI.

Add POI

7. You are asked to name the POI.

8. Select the POI category in which you want to add the POI.

Home

Favorite

1 2 2 3

Address

9. Select the location of your POI from the list below.

You can set your Home location as a POI.

If you want to change your Home location, you can create a POI of the

Home location before you change it.

You can create a POI from a Favorite.

You can only create a limited number of Favorites. If you want to create more Favorites you have to delete some Favorites first. Before you delete a Favorite, make it into a POI so that you don’t lose the address.

You can specify an address to be a POI. When you enter an address, you can choose from four options.

• City center

• Street and house number

• ZIP code

• Crossing or intersection

Select a POI location from a list of places you have recently used as destinations.

Recent destination

You can add a Point of Interest (POI) as a POI. For example, if you are creating a category of POIs for your favourite restaurants, use this option instead of entering the addresses of the restaurants.

Point of

Interest

Tap this button to add your current position as a POI.

For example, if you stop somewhere you like, while you are there you can tap this button to create the POI.

My location

Point on map

Tap this button to create a POI using the map browser.

Select the location of the POI using the cursor, then tap Done .

Tap this button to create a POI by entering latitude and longitude values.

Latitude

Longitude

Tap this button to make a POI of the current position of a TomTom Buddy.

TomTom

Buddy

Tap this button to create a POI using the address of a contact on your device.

Contact

How can I set warnings for POIs?

1. Tap the screen to bring up the main menu.

2. Tap Change preferences .

3. Tap Manage POIs .

4. Tap Warn when near POI .

Tap this button to receive a warning when you travel near to the location of a POI.

Warn when near POI

5. Select the category of POI you want to be warned about.

Select the category from the list or start to type the name of the category and select it when it is shown in the list.

6. Set how close the POI should be when you receive a warning.

7. Choose the warning sound for the category of POI you selected.

10. Itinerary Planning

What is an Itinerary?

An Itinerary is a plan for a trip including more locations than your final destination.

An Itinerary can include the following items:

• Destination - a location on your trip where you want to stop.

• Waypoint - a location on your trip you want to travel through without stopping.

Here’s an example of an Itinerary:

Destinations are shown using this symbol.

Waypoints are shown using this symbol.

When would I use an Itinerary?

You could use an Itinerary for trips such as:

• A road trip through a country with lots of stops.

• A two day car trip with an overnight stop.

• A short drive which passes by Points of Interest.

In all these examples you could tap Navigate to...

for each place. However, if you use an Itinerary, you can save time by planning everything in advance.

Creating an Itinerary

1. Tap the screen to bring up the main menu.

2. Tap Itinerary planning .

The Itinerary planning screen opens. At first, there are no items on the

Itinerary.

Itinerary planning

3. Tap Add and select a location.

Tip: You can add items to your Itinerary in any order and rearrange the order later.

Following an Itinerary

When you use an Itinerary to navigate, the route will be calculated to the first destination on the Itinerary. Your TomTom NAVIGATOR calculates the remaining distance and time to the first destination and not for the whole

Itinerary.

As soon as you start to use an Itinerary, the route is calculated from your current position. You do not need to set a departure point.

When you have passed a waypoint or reached a destination, it is marked as visited.

Waypoints are shown on the map. Your NAVIGATOR will not warn you when you are approaching a waypoint or when you arrive at a waypoint.

Organizing an Itinerary

Tap an item on your Itinerary to open a page of buttons for editing the item.

The buttons shown below are available.

Mark as waypoint

You can change a waypoint into a destination using this button.

Remember that waypoints are points on your trip to your destination that you want to pass and destinations are places where you want to stop.

This button is only shown if the item you tapped is a destination.

Mark as destination

Mark ‘visited’

You can change a waypoint into a destination using this button.

Remember that destinations are places where you want to stop, and waypoints are points on your trip to your destination that you want to pass.

This button is only shown if the item you tapped is a waypoint.

Tap this button to miss out part of your Itinerary. Your NAVIGATOR will ignore this item and all the items before it in the Itinerary.

It will navigate you to the next item in the Itinerary.

This button is only shown if you are still due to visit this item.

Mark ‘to visit’

Tap this button to repeat part of your Itinerary. Your NAVIGATOR will navigate you to this item followed by the rest of the items in the Itinerary.

This button is only shown if you have already visited this item.

Tap this button to move the item up the Itinerary.

This button is unavailable if the item is at the top of the Itinerary.

Move item up

Tap this button to move the item down the Itinerary.

This button is unavailable if the item is at the bottom of the Itinerary.

Move item down

Tap this button to see the location of the item on the map.

Show on map

Tap this button to delete the item from the Itinerary.

Delete item

Start Using an Itinerary

Tap Options , then tap Start navigation .

To save an Itinerary, tap Save Itinerary .

To load a saved Itinerary, tap Load Itinerary .

To create a new Itinerary, tap New Itinerary and to delete one, tap Delete

Itinerary .

11. Preferences

Use night colors / Use day colors

Use night colors

Tap this button to reduce the brightness of the screen and show darker colors on the map.

When should I use this?

When it’s dark, it is easier to see the screen if the display on your

NAVIGATOR is not brightly lit.

To change back to a brighter screen showing brighter colors on the map, tap Use day colors .

Use day colors

Show POI on map

Show POI on map

Tap this button to set which categories for the Points of Interest (POIs) should be shown on the map:

1. Tap Show POIs on map in the Preferences menu.

2. Select the POI categories to display on the map.

Tap Find to search for a POI category.

3. Tap Done .

The POIs you have selected are shown as symbols on the map.

Safety preferences

Safety preferences

Tap this button to set the following safety preferences:

• Hide most menu options while driving

• Suggest driving breaks

• Show safety reminders

• Warn when near places of worship or schools

• Warn when driving faster than allowed

• Warn when driving faster than a set speed

• Warn not to leave the device in the car

If you select one or more of the warnings, you will also be asked to select a sound to be played whenever a warning is displayed.

Select whether or not your TomTom NAVIGATOR should warn you about which side of the road you should be driving on.

Decide if you want the map display to be turned off in special circumstances and press Done .

What happens when I use the Turn off map display option?

When you turn off the map display, instead of seeing your position on a map in the Driving View, you will only see information about the next instruction.

Tap the button and select an option for when the map should be turned off.

These are the options:

• Always - The map will not be shown and you will only see information about the next instruction and arrows showing direction.

• Above a certain speed - you set the speed at which point the map will be turned off. This option is useful for situations when the map might be distracting, such as when you are driving fast.

• Never - the map is never turned off.

Voice preferences

Voice preferences

Tap Voice preferences to manage your TomTom voices. The following options are available:

• Change voice - tap this button to change the voice that gives you instructions.

• Disable voice - tap this button to disable the use of voices. To enable voices, tap Enable .

• Download voice - tap this button to download new voices from

TomTom Services and transfer them to your TomTom.

Turn off sound / Turn on sound

Tap this button to turn off sound. If you turn off the sound, warnings for upcoming POIs are also turned off.

The button changes to Turn on sound .

Turn off sound

Tips

To change the volume, tap Volume preferences in the Preferences menu.

To change the volume quickly while you are driving, tap the bottom lefthand section of the Driving View and move the slider.

To change the voice being used by your NAVIGATOR, tap Change voice in the Voice preferences menu.

Volume preferences

Tap this button to change the volume.

Volume preferences

Manage Favorites

Tap this button to rename or delete Favorites.

To find a Favorite quickly, tap Find , then start to type the name of the

Favorite. As soon as the Favorite is shown in the list, you can select it.

Manage

Favorites

Change Home location

Tap this button to set or change your Home location.

Change Home location

Do I need to use my actual home address for the Home location?

No. Your Home location can be a place you go often, for example, your office.

It can be your actual home address, but it can also be any address you like.

Why should I set a Home location?

Having a Home location means that you have a quick and easy way to navigate there, by tapping the Home button in the Navigate to...

Manage maps

Manage maps

Tap this button to do the following:

• Download a map - tap this button to download a map you have bought using TomTom HOME. It may not be possible to download maps on all devices.

• Switch map - tap this button to change the map you are using.

• Download free map corrections - tap this button to download map corrections provided as part of the Map Share service.

Use TomTom HOME to make backups, download, add and delete maps from your navigation device.

Manage POIs

Manage POIs

Tap this button to do the following:

• Set alerts for when you are near POIs.

For example, your NAVIGATOR can tell you when there is a gas station nearby.

• Create your own POI categories and add POIs to them.

For example, you could create a category of POIs called “Friends”, and add all your friends’ addresses as POIs in the category. You can even add your friends’ phone numbers with their address so you can call them from your NAVIGATOR.

Change car symbol

Tap this button to select a car symbol that will be used to show your current position in the Driving view.

Change car symbol

Change 2D/3D display / Turn on 2D display

Tap Turn on 2D display to change the perspective for viewing the map.

For example, the 2D view shows a two dimensional view of the map as though viewed from above.

Turn on 2D display

To switch the view to a three dimensional perspective, tap Change 2D/3D display and select a view from the list.

Change 2D/3D display

When should I use this?

In some situations, it is easier to see the map from above. Perhaps if the road network is complicated or for times when you are walking while using your

NAVIGATOR to navigate.

Compass preferences

Compass preferences

Tap this button to configure the compass. The following options are available:

• None - the compass is not shown.

• One with arrow pointing north - the arrow always points towards north and the direction you are moving is shown at the top of the compass.

• One with arrow showing your heading - the arrow always shows the direction you are moving.

If you select one of these options, you then need to select the features that are shown in the middle of the arrow:

• Direction - your direction is shown as a compass point, displayed in the center of the compass arrow.

• Degrees - your direction is shown as compass degrees, displayed in the center of the compass arrow.

• Nothing

• One with arrow pointing to your destination - the arrow always points towards your destination. The distance to your destination is displayed in the compass arrow.

Change map colors

Tap this button to select the color schemes for day and night map colors.

You can also download more color schemes from TomTom Services.

Change map colors

Start-up preferences

Start-up preferences

Tap this button to select what happens when your NAVIGATOR starts. The following options are available:

• Show the Driving View - your NAVIGATOR starts and shows the Driving

View.

• Ask for a destination - your NAVIGATOR starts with Navigate to...

menu. You can enter a destination immediately.

• Show the Main Menu - your NAVIGATOR starts with the Main Menu.

Status bar preferences

Status bar preferences

Tap this button to select the information shown on the status bar:

• Remaining time - the estimated time left until you reach your destination.

• Remaining distance - the distance left until you reach your destination.

• Current time

• Arrival time - your estimated arrival time.

• Speed

• Direction

• Show next street name - the name of the next street on your trip.

• Show current street name

• Show leeway to arrival time - your NAVIGATOR shows how late or early you will be compared with the preferred arrival time that is set during the planning of a route.

• Show max speed next to speed - only available when speed (above) is also selected.

• How should the status bar be displayed?

Horizontal - If you choose this option, the status bar will be shown at the bottom of the Driving view.

Vertical - If you choose this option, the status bar will be shown at the right-hand side of the Driving view.

Note : The vertical status bar is only available when using NAVIGATOR in landscape orientation.

Note : If the speed limit for the road you are on is available, it is shown next to your speed.

If you drive faster than the speed limit, your speed is shown in red.

Automatic zooming

Tap this button to enable or disable automatic zooming in the Driving View.

Automatic zooming

Quick menu preferences

Quick menu preferences

Tap this button to choose up to six buttons to be used in the Quick menu.

The Quick menu button enables easy access for your most commonly used buttons.

The buttons you assign for use with the Quick menu, are shown in the

Driving View.

Guided tours

Tap this button to show one of the Guided tours on how to use your

TomTom NAVIGATOR.

Guided tours

Name preferences

Name preferences

Tap this button to set the information that is shown on the map in the

Driving View. The following options are available:

• Show house number before street name

• Show street names - if you are using a computer voice for spoken instructions and have selected that street names should be read aloud, you do not need to select this option, since the street names will be read aloud even though this option is not selected.

• Show next highway / signpost - when this option is selected, the next major road on your route is shown at the top of the screen in the Driving

View.

• Show current street name on map

Set units

Set units

Tap this button to set the type of units that will be shown for the following:

• Distance

• Time

• Latitude and longitude

• Temperature

• Air pressure

Operate left-handed / Operate right-handed

Operate lefthanded

Tap this button to move important buttons, for example, the Done and

Cancel buttons as well as the zoom bar, to the left hand side of the screen.

This makes it easier to tap the buttons with your left hand without blocking the screen.

To move the buttons back to the right hand side of the screen, tap Operate right-handed .

Keyboard preferences

Keyboard preferences

You use the keyboard to enter your destination or to find an item in a list, such as a POI.

Tap this button to select the size of the keys on the keyboard and the keyboard layout. You can select from two sizes:

• Large keyboard

• Small keyboard

Three keyboard layouts are available:

• ABCD keyboard

• QWERTY keyboard

• AZERTY keyboard

Planning preferences

Planning preferences

Tap this button to set the kind of route planned when you select a destination.

The following options are available:

• Ask me every time I plan

• Always plan fastest routes

• Always plan shortest routes

• Always avoid freeways

• Always plan walking routes

• Always plan bicycle routes

• Always plan for limited speed

You can then set if the route summary screen closes automatically after you have planned a route. If you select No , you have to tap Done to close the route summary screen.

Toll road preferences

Toll road preferences

Tap this button to set how your NAVIGATOR handles toll roads if they are on the route to a destination you set. You can choose from the following options:

• Ask me when there are toll roads on my route - you are asked if you want to avoid a toll road whenever you plan a route.

• Always avoid toll roads

• Never to avoid toll roads

Change language

Tap this button to change the language used for all the buttons and messages you see on your NAVIGATOR.

You can choose from a wide range of languages. When you change the language, you are also given the opportunity to change the voice.

Change language

Show GPS status

Tap this button to view navigational information such as sattelite reception, map coordinates, current speed and direction.

Show GPS status

Do not ask arrival time

Tap this button to stop your navigation device asking the arrival time when you plan a trip.

Do not ask arrival time

Hide tips / Show tips

Tap this button to stop your NAVIGATOR from showing tips.

To turn tips on again, tap Show tips .

Hide tips

Reset factory settings

Tap this button to restore the factory settings to your TomTom NAVIGATOR.

All your settings, including Favorites, your Home location, warnings for

POIs and any Itineraries you have created are deleted.

Reset factory settings

12. TomTom Traffic

TomTom Traffic is a TomTom Service for receiving up-to-date traffic information. TomTom Traffic requires a wireless data connection (GPRS,

EDGE, UMTS, CDMA).

TomTom Traffic uses the most up-to-date information from the best local sources. For more information about subscribing see tomtom.com/services

Setting up TomTom Traffic

1. Tap TomTom Traffic in the Main Menu.

2. Tap Enable Traffic .

3. Enter your username and password.

The Traffic sidebar is shown on the right-hand side of the Driving View and your device retrieves the latest traffic information from TomTom.

The following symbols are shown at the top of the Traffic sidebar:

Your device is busy retrieving traffic information.

Traffic information is up to date.

Traffic information has not been updated for at least 15 minutes.

Traffic information has not been updated for at least 30 minutes.

Traffic information has not been updated for at least 45 minutes.

Traffic information has not been updated for at least one hour.

No connection is available between your TomTom device and the

TomTom Traffic server.

Using TomTom Traffic

If you have a route planned, the traffic sidebar warns you about any traffic incidents on your route.

In this example, there is a traffic jam on your route 9 miles ahead that will cause an expected delay of 38 minutes.

To find the quickest route to your destination, do the following:

1. Tap the Traffic sidebar.

Tip : If you have trouble tapping the Traffic sidebar and the Main Menu is being displayed instead of the traffic menu, try tapping your finger half on the Traffic sidebar and half off the screen.

2. Tap Minimize delays .

Your device looks for the quickest route to your destination.

It is possible that the new route may also include traffic delays, or may even be the same route as before. You can re-plan the route to avoid all delays, but this new route will take longer than the quickest route already shown.

3. Tap Done .

Retrieving traffic info...

With TomTom Traffic, there are two ways to update the traffic information:

• Tap Update traffic info in the Traffic menu.

• Set Traffic to be updated automatically at regular intervals.

To do this, tap Change Traffic preferences in the Traffic menu. Select

Automatically update traffic info while on route , then tap Done .

You are then asked if you want to limit how often Traffic is updated.

If you choose not to limit how often Traffic is updated, then TomTom will send updated traffic information to your NAVIGATOR as soon as it is available.

If you choose to limit how often Traffic is updated, you are asked to set a time.

TomTom saves this time limit and sends new traffic information at the interval you set. If there is no new traffic information, then TomTom will not

send any information to your NAVIGATOR. This saves you money by not using your wireless data connection when there is no new information.

Using traffic information

Having up-to-date traffic information can help you to reduce your trip time.

Whenever you plan a route, the latest traffic updated you received from

TomTom is taken into account by your NAVIGATOR when it plans the route.

Your NAVIGATOR can also recalculate your route if the traffic situation changes after you start a trip:

1. Tap Change Traffic preferences in the Traffic menu.

2. Select Automatically optimize route after every update .

After your NAVIGATOR gets new traffic information, it will automatically optimise your route.

Note : The best route may be the same as the route originally planned.

13. Introducing TomTom HOME

TomTom HOME is a free application for your computer that helps you manage the contents of your TomTom device. Connect to HOME frequently to get the latest updates for your device.

You can, for example, do the following:

• Manage maps, voices, POIs and more.

• Buy TomTom services and manage your subscriptions.

• Update your TomTom with the latest software and services automatically.

• Read the full version of the user manual.

Tip : To get the most from HOME, we recommend using a broadband internet connection.

Installing TomTom HOME

You can install TomTom HOME in two ways:

• From the CD supplied.

• By downloading it from tomtom.com/home .

14. Addendum

Important Safety Notices and Warnings

Global Positioning System

The Global Positioning System (GPS) is a satellite-based system that provides location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United

States of America, which is responsible for its availability and accuracy. Any changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of your TomTom device. TomTom does not accept any liability for the availability and accuracy of GPS.

Use with Care

Use of a TomTom device for navigation still means that you need to drive with due care and attention.

Aircraft and Hospitals

Use of devices with an antenna is prohibited on most aircraft, in many hospitals and in many other locations. A TomTom device must not be used in these environments.

REMARQUE SPÉCIALE RELATIVE À LA CONDUITE EN CALIFORNIE ET DANS

LE MINNESOTA

Le California Vehicle Code Section 26708 (a) (1) stipule que "Conduire un véhicule motorisé avec un objet ou matériel placé, affiché, installé, fixé ou appliqué sur le pare-brise ou les vitres latérales ou arrières est interdit.” En

Californie, les conducteurs ne doivent pas utiliser une fixation à ventouse sur leur pare-brise ou leurs vitres latérales ou arrières.

Remarque : Cette section du California Vehicle Code s'applique à toute personne conduisant en Californie, et non uniquement aux californiens résidents.

La réglementation "Minnesota State Legislature Statutes" section 169.71, sous-division 1, section 2 stipule que “Il est interdit de conduire ou manœuvrer le véhicule avec des objets suspendus entre le conducteur et le pare-brise autres que les pare-soleil, les rétroviseurs et les appareils de paiement de péage électroniques."

Remarque : Cette loi du Minnesota s'applique à toute personne conduisant au

Minnesota et non seulement aux résidents du Minnesota.

TomTom Inc. décline toute responsabilité concernant les amendes, les pénalités ou les dommages découlant du non-respect de cette notice.

Lorsque vous conduisez dans des états imposant des restriction de fixation sur pare-brise, TomTom recommande l'utilisation du disque de fixation adhésif ou du kit de fixation alternatif, qui inclut plusieurs options de fixation

des appareils TomTom sur le tableau de bord et les bouches d'aération. Pour plus d'informations sur cette option de fixation, rendez-vous sur www.tomtom.com.

This Document

Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. The information in this document is subject to change without notice.

TomTom shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the performance or use of this material. This document contains information protected by copyright. No part of this document may be photocopied or reproduced in any form without prior written consent from TomTom

International B.V.

15. Copyright notices

© 2008 TomTom International BV, The Netherlands. TomTom™ and the "two hands" logo are among the trademarks, applications or registered trademarks owned by TomTom International B.V. Our limited warranty and end user license agreement for embedded software apply to this product; you can review both at www.tomtom.com/legal

© 2008 TomTom International BV, Niederlande. TomTom™ und das Logo mit den »zwei Händen« gehören zu den Warenzeichen, Anwendungen oder registrierten Markenzeichen von TomTom International B.V. Für dieses

Produkt gelten unsere eingeschränkte Garantie und unsere

Endnutzerlizenzvereinbarung für integrierte Software, die Sie beide auf www.tomtom.com/legal einsehen und nachlesen können.

TomTom ("deux mains") comptent parmi les marques commerciales, les applications ou les marques déposées de TomTom International B.V.

L'utilisation de ce produit est régie par notre garantie limitée et le contrat de licence utilisateur final relatif aux logiciels embarqués ; vous pouvez consulter ces deux documents à l'adresse suivante : www.tomtom.com/legal

© 2008 TomTom International BV, Nederland. TomTom™ en het "tweehandenlogo" maken onderdeel uit van de handelsmerken, applicaties of geregistreerde handelsmerken in eigendom van TomTom International B.V.

Op dit product zijn onze beperkte garantie en licentieovereenkomst voor de eindgebruiker van toepassing; beide zijn te vinden op www.tomtom.com/ legal

"due mani" fanno parte dei marchi, delle applicazioni e dei marchi registrati di proprietà di TomTom International B.V. La nostra garanzia limitata e il contratto di licenza per l'utente finale vengono applicati a questo prodotto, è possibile consultarli entrambi all'indirizzo www.tomtom.com/legal

TomTom International B.V. Nuestra garantía limitada y nuestro acuerdo de licencia de usuario final para el software integrado son de aplicación para este producto; puede consultar ambos en www.tomtom.com/legal

"duas mãos" fazem parte das marcas comerciais, aplicações ou marcas

comerciais registadas cuja proprietária é a TomTom International B.V. A nossa garantia limitada e contrato de licença de utilizador final relativas ao software incorporado dizem respeito a este produto; pode consultar ambos em www.tomtom.com/legal

© 2008 TomTom International BV, Holland. TomTom™ og logoet med "de to hænder" er blandt de varemærker, produkter og registrerede varemærker, der tilhører TomTom International B.V. Vores begrænsede garanti og slutbrugerlicensaftale for indlejret software gælder for dette produkt; begge dokumenter findes på www.tomtom.com/legal

"två händer" tillhör de varumärken, programvaror eller registrerade varumärken som ägs av TomTom International B.V. Vår begränsade garanti och vårt slutanvändarlicensavtal för inbyggd programvara kan gälla för denna produkt. Du kan läsa dem båda på www.tomtom.com/legal

2008 TomTom™ ja "two hands" -logo ovat eräitä TomTom International B.V.:n omistamia tavaramerkkejä, sovelluksia tai rekisteröityjä tavaramerkkejä.

Rajoitettu takuumme ja loppukäyttäjän käyttösopimuksemme sulautetuille ohjelmistoille koskevat tätä tuotetta; voit tarkastaa molemmat verkkosivuillamme www.tomtom.com/legal

© 2008 TomTom International BV, Nederland. TomTom™ og "de to hendene"logoen er blant de varemerker, programvarer og registrerte varemerker som eies av TomTom International B.V. Vår begrensede garanti og lisensavtale med sluttbruker for integrert programvare gjelder dette produktet. Du kan lese om begge på www.tomtom.com/legal

© 2008 TomTom International BV, Holandia. Znak TomTom™ i logo z dwiema d³oñmi nale¿y do znaków handlowych, aplikacji lub zastrze¿onych znaków handlowych, których w³aœcicielem jest firma TomTom International B.V. Do niniejszego produktu zastosowanie ma umowa licencyjna dla koñcowego u¿ytkownika produktu oraz ograniczona gwarancja na wbudowane oprogramowanie; oba dokumenty mo¿na przejrzeæ na stronie www.tomtom.com/legal

© 2008 TomTom International BV, Nizozemsko. TomTom™ a logo se dvìma dlanìmi patøí mezi obchodní znaèky, aplikace nebo registrované ochranné známky ve vlastnictví spoleènosti TomTom International B.V. Na tento produkt se vztahuje omezená záruka a smlouva s koncovým uživatelem pro vestavìný software; do obou dokumentù mùžete nahlédnout na www.tomtom.com/legal

© 2008 TomTom International BV, Hollanda. TomTom™ ve "two hands" logolar ı TomTom International B.V.'ye ait ticari marka, uygulama veya kay ı tl ı ticari markalard ı r. S ı n ı rl ı garantimiz ve kat ı ş t ı r ı lm ı ş yaz ı l ı m ı n son kullan ı c ı lisans sözle ş mesi bu ürün içindir; www.tomtom.com/legal adresinden ikisine de göz atabilirsiniz

alkalmazások és bejegyzett védjegyek közé tartozik. A korlátozott garancia és a benne foglalt szoftver végfelhasználói licencszerz ő dése érvényes erre a termékre; melyeket a következ ő helyen tekinthet át: www.tomtom.com/legal

© 2008 TomTom International BV, Holland. TomTom™ ja "kahe käe" logo kuuluvad nende kaubamärkide, rakenduste või registreeritud kaubamärkide hulka, mille omanikuks on TomTom International B.V. Sellele tootele kehtib meie piiratud garantii ja lõppkasutaja litsentsileping manustarkvara jaoks; saad tutvuda mõlemaga aadressil www.tomtom.com/legal

© 2008 TomTom International BV, N ī derlande. TomTom™ un "divu roku" logotips ir vienas no pre č u z ī m ē m, lietojumiem vai re ģ istr ē t ā m pre č u z ī m ē m, kas pieder uz ņē mumam TomTom International B.V. Šim produktam ir piem ē rojama m ū su uz ņē muma ierobežot ā garantija un iegult ā s programmat ū ras gala lietot ā ja licences l ī gums, ar kuriem var iepaz ī ties www.tomtom.com/legal

© 2008 TomTom International BV, Nyderlandai. TomTom™ ir dviej ų rank ų logotipas yra TomTom International B.V. vienas iš preki ų ženkl ų , program ų arba registruot ų j ų prek ė s ženkl ų . M ū s ų ribota garantija ir galutinio naudotojo sutartis naudotis į d ė t ą ja programine į ranga taikoma šiam produktui; galite perži ū r ė ti abu dokumentus svetain ė je www.tomtom.com/legal

© 2008 TomTom International BV, Països Baixos. TomTom™ i el logotip amb les "dues mans" formen part de les marques comercials, aplicacions o marques comercials registrades propietat de TomTom International B.V. La nostra garantia limitada i l'acord de llicència per a usuaris finals per al programari inclòs són aplicables a aquest producte. Podeu consultar ambdós documents a www.tomtom.com/legal

© 2008 TomTom International BV, Holandsko. TomTom™ a logo s "dvoma rukami" patria medzi ochranné známky, aplikácie alebo registrované ochranné známky vlastnené spolo č nos ť ou TomTom International B.V. Na tento produkt sa vz ť ahuje obmedzená záruka a dohoda s koncovým užívate ľ om pre vstavaný softvér; viac informácií o oboch nájdete na www.tomtom.com/legal

© 2008 TomTom International BV, Holanda. TomTom™ e o logotipo de "duas mãos" estão entre as marcas comerciais, aplicativos ou marcas registradas possuídas pela TomTom International B.V. Nossa garantia limitada e acordo de licenciamento do usuário final para o software incluído se aplicam para este produto; ambos podem ser vistos em www.tomtom.com/legal

Data Source

© Swisstopo.

This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of Her Majesty’s Stationery Office. © Crown copyright and/or database right 2008. All rights reserved. Licence number

100026920.

Data Source

Canadian Data © DMTI Spatial. Portions of Canadian map data are reproduced under license from Her Majesty the Queen in Right of Canada with permission from Natural Resource Canada. Point of Interest data by Info

Data Source

Whereis® is a registered trademark of Telstra® Corporation Limited, used under license.

Some images are taken from NASA’s Earth Observatory.

The purpose of NASA’s Earth Observatory is to provide a freely-accessible publication on the Internet where the public can obtain new satellite imagery and scientific information about our home planet.

The focus is on Earth’s climate and environmental change: earthobservatory.nasa.gov/

Loquendo is a registered trademark. www.loquendo.com

Tangazo