Acer ASPIRE Z3-715 Owner's Manual

Technical Documentation of (EU) No 617/2013

Product type

Product category

Manufacturer name, address

Product model number

Year of manufacture

E

TEC

allowance with capability adjustments when discrete graphics cards are disabled (from 1 July 2014)

E

TEC

allowance with capability adjustments when discrete graphics cards are enabled (from 1 July 2014)

E

TEC

allowance with capability adjustments when discrete graphics cards are disabled (from 1 January 2016)

E

TEC

allowance with capability adjustments when discrete graphics cards are enabled (from 1 January 2016)

Whether all discrete graphics card are enabled during the test

Whether switchable graphics mode with

UMA is driving the display during the test

E

TEC

of highest power-demanding configuration

Idle state power demand

Sleep mode power demand

Sleep mode with WOL enabled power demand

Off mode power demand

Off mode with WOL enabled power demand

Maximum power demand

Internal power supply (IPS) efficiency at

10 %, 20 %, 50 % and 100 % of rated output power

External power supply's (EPS) average active efficiency

Noise levels (the declared A-weighted sound power level, L

WAd

) of idle mode

Integrated desktop computer

D

Acer Italy s.r.l,

Via Lepetit, 40, 20020 Lainate (MI) Italy

Aspire AZ3-715

2015

Yes

No

Not applicable

Not applicable

279 kWh/year

313 kWh/year

218 kWh/year

236 kWh/year

88.89648 kWh/year

24.64 Watt

2.09 Watt

2.1 Watt

0.34 Watt

0.34 Watt

89.00%

3.0 B

Noise levels (the declared A-weighted sound power level, L

WAd

) of "HDD random seek" mode

Minimum number of loading cycles that the batteries can withstand

Configuration of memory

Configuration of internal storage

Not applicable

4~32G

1~2 piece

Configuration of discrete television tuner 0~1 piece

Configuration of discrete audio card 0 piece

Configuration of discrete graphics cards 0~1 piece

Configuration of discrete graphics cards category

G1

The external package of the notebook provides the information, "The battery in this product cannot be easily replaced by users themselves."

For products with an integrated display, the total content of mercury is

Not applicable

Measurement methodology for E

TEC

3.0 B

0 mg

COMMISSION REGULATION (EU) No

617/2013 of 26 June 2013 implementing

Directive 2009/125/EC of the European

Parliament and of the Council with regard to ecodesign requirements for computers and computer servers:

ANNEX II Ecodesign requirements and timetable:

1.1.1. E

TEC

formula.

Measurement methodology for idle mode

EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:

5.2. Test setup;

5.3.4. Measuring long idle mode;

5.7. True RMS watt meter specification;

5.8. True RMS watt meter accuracy;

Annex E.2 (informative) ENERGY STAR ®

V5 compliant testing methodology.

Measurement methodology for sleep mode

Measurement methodology for off mode

EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:

5.2. Test setup;

5.3.3. Measuring sleep mode;

5.4. Test conditions;

5.7. True RMS watt meter specification;

5.8. True RMS watt meter accuracy.

EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:

5.2. Test setup;

5.3.2. Measuring off mode;

5.4. Test conditions;

5.7. True RMS watt meter specification;

5.8. True RMS watt meter accuracy.

Measurement methodology for IPS efficiency

Not applicable

Measurement methodology for EPS efficiency

EN 50563:2011 External a.c.—d.c. and a.c.—a.c. power supplies —

Determination of no-load power and average efficiency of active modes.

Measurement methodology for noise level

ECMA-109 2nd edition (December 1987)

Declared Noise Emission Values of

Computer and Business Equipment:

4. Determination of the declared noise emission values.

ECMA-74 11th edition (December 2010)

Measurement of Airborne Noise emitted by Information Technology and

Telecommunications Equipment:

5. Installation and operating instructions;

6. Method for determination of sound power levels of equipment in reverberation test rooms;

7. Method for determination of sound power levels of equipment under essentially free-field conditions over a reflecting plane;

Annex C.15 Equipment category: personal computers and workstations.

Measurement methodology for battery loading cycles

Not applicable

Sequence of steps for achieving a stable condition with respect to power demand

EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:

5.2. Test setup;

5.3.2. Measuring off mode;

5.3.3. Measuring sleep mode;

5.3.4. Measuring long idle mode.

Description of how sleep mode was selected or programmed

EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:

5.2. Test setup;

5.3.3. Measuring sleep mode.

Description of how off mode was selected or programmed

EN 62623:2013 — Desktop and notebook computers — Measurement of energy consumption:

5.2. Test setup;

5.3.2. Measuring off mode.

Sequence of events required to reach the mode where the equipment automatically changes to sleep mode

ENERGY STAR ® Program Requirements

Product Specification for Computers,

Eligibility Criteria Version 6.0, Rev. Oct-

2013:

1.D.4 Sleep Mode.

Sequence of events required to reach the mode where the equipment automatically changes to off mode

Not applicable

The duration of idle state condition before the computer automatically reaches sleep mode, or another condition which does not exceed the applicable power demand requirements for sleep mode

30 minutes

The length of time after a period of user inactivity in which the computer automatically reaches a power mode that has a lower power demand requirement than sleep mode

The length of time before the display sleep mode is set to activate after user inactivity

User information on the energy-saving potential of power management functionality

User information on how to enable the power management functionality

Test parameter for ambient temperature

Test parameter for test voltage

Test parameter for frequency

Test parameter for total harmonic distortion of the electricity supply system

Test parameter for information and documentation on the instrumentation, set-up and circuits used for electrical testing

30 minutes

10 minutes http://www.energystar.gov/index.cfm?c=p ower_mgt.pr_power_mgt_users

http://www.energystar.gov/index.cfm?c=p ower_mgt.pr_power_mgt_users

25 ℃

230 V

50 Hz

3 %

Digital Power Meter- Yokogawa WT210

Programmable AC Soure- Chroma 61603