Shimano BL-L331 Brake Lever Service Instructions
PDF
દસ્તાવેજ
જાહેરાત
જાહેરાત
SERVICE INSTRUCTION
Brake Levers
e BL-L331 |
Before use, read these instructions carefully, and follow them
for correct use.
E Specifications
e Weight: 254g (left / right pair)
e Material: light alloy
e Clamp band diameter: ¢$23.8mm~¢24.2mm (15/16"~31/32")
e Cable: outer cable with liner
How to install the brake lever
1 Secure the brake lever to the handlebar.
Clamp bolt tightening torque:
60—80kgfem (50—70 In-1bs.)
Pass the inner cable through from the front of
2 the brake lever and attach the inner end to the
wire hook. Then pass it through the outer casing
from the rear. N
~a Wire hook
Outer casing
Inner end
Outer casing
Inner end
Wire hook
Clamp bolt
e Please nole: Specifications are subject lo change for improvement wilhoul nolice
With the cable placed along the front part of the
handlebar, cover with the outer guide. Be sure that
the installation is done so that the pointed part is at
the lever side.
Pointed part of из ©
outer guide Sod
Outer guide
(option)
Cut the outer guide to correspond to the length of
the handlebar.
Temporarily secure the outer guide to the handlebar
(by using tape or similar material).
Outer guide
(option)
The length of t
there is enough extra length when the handiebar is
turned completely to the left and right.
How to use the cable joint (Option)
When the cable joint is used to divide
the outer casing, the caliper side of the
% outer casing can be replaced easily,
{ / with the handlebar tape still wrapped.
e Cut the outer casing at a point 20mm inward from
the end of the outer guide.
Note:When cutting the outer casing, refer to the
section “How to install the brake lever”, and
make the cut only after first installing the brake
lever and cable to the handlebar and carefully
checking the position where the cut will be made.
Be careful not to cut the inner cable when
cutting the outer casing.
Cable joint
Outer guide
Quter casing
Outer casing mm (caliper brake
(lever side) side)
e Insert the lever side of the outer casing and the caliper
brake side of the outer casing into the cable joint. Then
cover them with the outer guide, and wrap with
handlebar tape.
e To change the outer casing due to damage, change
in stem height or color, only replacement of the
caliper brake side of the outer casing is necessary.
Outer guide
(option)
SHIMANO SALES CORPORATION
9530 Cozycroft Avenue, Chalsworih, California 91311 Tel. (818) 882-4411
SHIMANO (SINGAPORE) PTE. LTD.
No. 20, Benoi Secior, Jurong Town, Singapore 2262 Tel. 2654777
SHIMANO AMERICAN CORPORATION
205 Jefferson Road, Parsippany, New Jersey 07054 US A Tel (201) 884-2300
SHIMANO INDUSTRIAL CO.LTO.
3-77 Oimatsucho, Sakai, Osaka, Japan Tel. (0722) 23.3243
SHIMANO (EUROPA) GmbH.
Im Huelsenfeld 13 4010 Hilden, West Germany Tel. 02103-5005-16
© Jul. 1986. by Shimano. P-35 PIT. 8ZK. Prinled in Japan (English)
">
/
ડાઉનલોડ કરો
માત્ર એક મૈત્રીપૂર્ણ રીમાઇન્ડર. તમે અહીં જ દસ્તાવેજ જોઈ શકો છો. પરંતુ સૌથી મહત્વપૂર્ણ બાબત એ છે કે, અમારા AI એ તેને પહેલેથી જ વાંચી લીધો છે. તે જટિલ બાબતોને સરળ શબ્દોમાં સમજાવી શકે છે, કોઈપણ ભાષામાં તમારા પ્રશ્નોના જવાબ આપી શકે છે અને તમને સૌથી લાંબા અથવા સૌથી જટિલ દસ્તાવેજોને પણ ઝડપથી નેવિગેટ કરવામાં મદદ કરી શકે છે.
જાહેરાત