Shimano SL-M453 Shifting Lever Service Instructions

SERVICE INSTRUCTIONS
Before use, read these instructions carefully, and follow them for correct
use.
Shifting Lever
SL-M453
Brake Lever
BL-M451
Note
The following products should be used together for the
Shimano Index System (SIS) function.
«Shifting Lever...........SL-M453
*Rear Derailleur..........AD-M452
*Freehub, Freewheel...FH-M452/CS-MT62
(7 speeds)
GN rie CN-MT62
Outer Cable... Shimano SIS-SP cable
The following products should be used together for the
Shimano Linear Perte (SLR).
«Brake Lever..............BL -M451
*Brake......... Ebb aki -BR-M454/BR-M453/BR-M452
*Outer Cable... ...Shimano outer cable casing with
liner
Shifting lever installation
The brake lever and shifting-lever. are the unified type.
SHIMANO AMERICAN CORPORATION SHIMANO (EUROPA) GmbH.
One Shimumo Drive, jene, Calilornis U S.A 92718 Tel, (714) 051-5003 im Húlsenteld 13 4010 Hilden, West Germany Tel 02103 5005 0 No 20, Benoi Sector, Jurorg Town, Singapore 2262 Tel 2654777 377 Oimatsuetro, Saka
Installation of the brake lever and cable
e-mm lock nut
Inner end
Inner end adapter
(1) Insert the inner cable through the adjustment bolt and
nut, then assemble the inner end through the outer
guide hole.
(2) Hook the inner end on the inner end adapter.
Note: Check to be sure that the adjustment nut is securely
seated in the outer guide hole.
The use of 1.6-mm inner cable and 5-mm outer
casing is standard.
E Turn the width adjustment bolt to the preferred
brake width.
(7
Width adjustment bolt we
Please note: Specifications are subject to change for improvement without notice. (English)
SHIMANO (SINGAPORE) PTE. LTD. SHIMANO INDUSTRIAL [mo
i. Osaka, Japan Tel (0722) Pe
O Jul. 1988 by Shimano Co., Ltd. R-57 XBC SZK Printed in Japan