USB Ranger

®

2211

Quick

Start

Guide

Before you get started, ensure that all the drivers required for your USB device(s) are installed.

1

2

Place units where desired, and connect the Cat 5

(solid core) extension link cabling to the Link ports (RJ45) to the Local Extender (LEX) and Remote Extender (REX)

Connect the power adapter to the desired unit –

LEX or REX.

LEX

Plug power adapter in either LEX or REX unit

(Cat 5 cable not included)

Max 100 m

REX

3 Connect LEX to PC with included USB cable.

PC

Refer to the complete user guide online at www.icron.com/2211

For technical support with your USB Ranger® 2211 product contact: [email protected]

www.icron.com

4 Attach USB device to REX.

#90-00941-A01

Certification, Compliance and Warranty Information

FCC Radio Frequency Interference Statement Warning

This device complies with FCC Part 15 Subpart B.

CE Statement

We, Icron Technologies Corporation, declare under our sole responsibility that the USB Ranger, to which this declaration relates, is in conformity with

European Standard EN 55022 Class A, EN 61000 and EN 55024.

IC Statement

This Class A digital apparatus complies with Canadian ICES-003.

Limited Hardware Warranty

Icron Technologies Corporation warrants that any hardware products accompanying this documentation shall be free from significant defects in material and workmanship for a period of one year from the date of purchase. Icron Technologies Corporation’s hardware warranty extends to Licensee, its customers and end users.

The warranty does not include repair of failures caused by: misuse, neglect, accident, modification, operation outside a normal operating environment, service of the device by non-authorized servicers, or a product for which Icron is not responsible.

Hardware Remedies

Icron Technologies Corporation’s entire liability and the Licensee’s exclusive remedy for any breach of warranty, shall be, at Icron Technologies

Corporation’s option, either: (a) return of the price paid, or (b) repair or replacement of hardware, which will be warranted for the remainder of the original warranty period or 30 days, whichever is longer. These remedies are void if failure of the hardware has resulted from accident, abuse, or misapplication.

Limitation of Liability

The hardware warranty set forth in this agreement replaces all other warranties. Icron Technologies Corporation expressly disclaims all other merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the hardware.

Icron Technologies Corporation dealer, agent, or employee is not authorized to make any modification, extension, or addition to this warranty. Under no circumstances will Icron Technologies Corporation, its suppliers or licensors be liable for any costs of procurement or substitute products or services, lost profits, loss of information or data, or any other special, indirect, consequential, or incidental damages arising in any way out of the sale of, use of, or inability to use Icron Technologies Corporation product or service, even if Icron Technologies Corporation, its suppliers or licensors have been advised of the possibility of such damages. In no case shall Icron Technologies Corporation, its suppliers and licensors’ liability exceed the actual money paid for the products at issue.

Since some jurisdictions do not allow the limitation of implied warranties of liability for incidental, consequential, special, or indirect damages, the above limitation may not always apply. The above limitations will not apply in case of personal injury where and to the extent that applicable law requires such liability.

Obtaining Warranty Service

To obtain warranty service, you must contact Icron Technologies Corporation within the warranty period for a Return Material Authorization (RMA) number.

Icron Technologies Corporation will not accept returns without an authorized

RMA number. Be sure to include the serial numbers of the LEX unit and REX unit in any of your email correspondence. Package the product appropriately for safe shipment and mark the RMA number on the outside of the package.

The package must be sent prepaid to Icron Technologies Corporation. We recommend that you insure it, or send it by a method that provides tracking of the package. The repaired or replaced item will be shipped to you, at Icron

Technologies Corporation’s expense, not later than thirty days after Icron

Technologies Corporation receives the defective product.

Address to return product: Icron Technologies Corporation

Att: RMA Coordinator

4664 Lougheed Hwy., Suite 221

Burnaby, BC V5C 5T5 Canada

Warranty/RMA Inquiries: [email protected]

www.icron.com

©2012 Icron Technologies Corporation. All rights reserved. Icron Technologies Corporation, the

Icron Technologies Corporation logo, and the Icron

Technologies Corporation products referred to herein are either the trademarks or the registered trademarks of Icron Technologies Corporation. All other trademarks are property of their respective owners. Icron Technologies Corporation assumes no responsibility for errors that may appear in this document. Information contained herein is subject to change without notice. #90-00941-A02