MSP 325
Quick Start
● Support 4K@30Hz, YUV 4:4:4, HDCP 1.X
● Support OSD
● Support recording AV to media storage via USB 3.0
● Manage configuration on Web
● Search and browse vedieo on ONVIF
CONTENTS
Product Introduction
...................................................................................................................................................2
Packing Configuration
................................................................................................................................................. 3
Hardware Orientation ................................................................................................................................................. 4
Interface
.............................................................................................................................................................. 4
Use Your Product
.........................................................................................................................................................5
Log in Web UI
.............................................................................................................................................................. 5
Check Status
................................................................................................................................................................ 5
Preview Video ..............................................................................................................................................................5
Encoder Setting
........................................................................................................................................................... 7
Main Stream
................................................................................................................................................7
Audio Setting
...............................................................................................................................................8
Advanced
.....................................................................................................................................................8
OSD ......................................................................................................................................................................9
OSD Streaming Setting
................................................................................................................................9
LOGO Upload
...............................................................................................................................................9
System
............................................................................................................................................................... 10
Network
.....................................................................................................................................................10
Password ................................................................................................................................................... 10
Serial to TCP
.............................................................................................................................................. 10
Upgrade
..................................................................................................................................................... 11
Reset
..........................................................................................................................................................11
Reboot
....................................................................................................................................................... 11
Multicast ............................................................................................................................................................12
Play Source on NVR
........................................................................................................................................... 12
Trouble Shooting
....................................................................................................................................................... 13
Cannot login in the WEB UI
.......................................................................................................................13
Cannot Play Video on VLC
.........................................................................................................................15
Contact Information .................................................................................................................................................. 17
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
1 / 18
Product Introduction
Encode HDMI signals for H.265 or H.264 IP streaming transmission with the MSP325. Resolutions up to 1080p are supported with facility for audio insert via the mini Jack port.
On board features include OSD and LOGO which can be set via LAN connection along with other settings to configure resolution and bit rate.
System Connection Diagram
MSP 325 HDMI-H.265 Encoder System
Connection Diagram
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
2 / 18
Packing Configuration
Power
Adapter
Power
Cable*2
Note:
AC Power Cable supplied as standard according to destination market.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
3 / 18
Hardware Orientation
Interface
1
2
DC 12V-3.5mm Jack
HDMI 1.4-HDMI-A
6
7
USB 3.0 for U Disk to store the media record
SD slot for SD memory card to stor media record
Record button
3
Audio In-3.5mm stero
Jack
LAN-RJ45
8
4
5 Reset
9 Power indicator
LAN HDMI
When there are SD card installed in SD slot or U disk connected to USB 3.0 port, press RECORD, the media content from HDMI in can be recorded and stored in SD card or U Disk.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
4 / 18
Use Your Product
Log in Web UI
Type in 192.168.1.168 to the search bar of your internet browser and open up the online admin interface.
There will pop up and a window asking for user name (admin) and password (admin).
Check Status
Change the language of WEB UI to English if needed. Check the main stream address as in the red frame.
Preview Video
Input signal can be prieviewed either on WEB UI or on VLC Player
Check Status-Main Stream-Preview Video
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
5 / 18
Or play video on VLC Media Player. When there are valid input signal captured, open up VLC Player
（ download
： http://www.videolan.org/
）， choose media→Open Network Stream.
Type in the TS URLfrom Main Stream
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
6 / 18
Encoder Setting
Main Stream
Click Encoder→Main Stream→Type in each parameter’s vlaue→click Apply
Explanation of Some Parameters:
FPS:Frame Per Second, numbers of picture output each second
GOP:gap of key frame, how many pictures between each two key frame
Bitrate:numbers of bits processed in each second.
Here is an usual bitrate setting table.
Item Calculation Formula 192×144 320×240 480×360 640×480 1280×720 1920×1080
EX Low W×H×3/4
Low W×H×3/2
30kb/s
60kb/s
60kb/s 120kb/s 250kb/s 500kb/s 1mbps
120kb/s 250kb/s 500kb/s 1mbps 2mbps
Medium W×H×3
High W×H×3×2
EX High W×H×3×4
120kb/s 250kb/s 500kb/s 1mbps
250kb/s 500kb/s 1mbps
500kb/s 1mbps 2mbps
2mbps
4mbps
2mbps
4mbps
8mbps
4mbps
8mbps
16mbps
Bitrate Control
CBR
stands for constant
bitrate
. During
CBR
encoding, the
bitrate
or the number of
bits per
second is kept the same throu ghout the encoding process.
VBR
stands for variable
bit rate
VBR changes the bitrate according to the image content
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
7 / 18
Audio Setting
Click Encoder→Audio→Type in each parameter’s vlaue→click Apply
Advanced
Click Encoder→Advanced→Type in each parameter’s vlaue→click Apply
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
8 / 18
OSD
OSD Streaming Setting
Click OSD →Main Stream→Type in each parameter’s vlaue→click Apply
LOGO Upload
Click LOGO Upload→select desired LOGO pic from local→click Upload
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
9 / 18
System
Network
Click System→Network→Type in parameters→click Apply
Password
Click System→Password→type in password→click Apply
Serial to TCP
Click System→Serial to TCP→choose Baude Rate and TCP Port→click Apply
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
10 / 18
Upgrade
Click System→Upgrade→choose ugrade file.up.rar→click Upload
Reset
Click System→Reset→click Reset
Reboot
When reboot is requrired, Click Reboot. (Reresh the webpage 1 minute after reboot)
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
11 / 18
Multicast
Multicast is designed for multiple local users to watch the video source from one Endcoder.
Enable Multicast in Encoder→Main Stream→Enable Multicast
After Enable Multicast, a warning window pop up. Reboot the Encoder is required.
After rebooting the device, a multicast URL is shown in the Status. Copy the multicast URL and paste on VLC
Player of each each user.
Play Source on NVR
Make sure your NVR can support H.264 decoding. Due to ONVIF communication, RTSP shall be enabled.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
12 / 18
If the audio from the Encoder need to be recognizable on NVR, the AUDIO setting shall be done. After AUDIO
Setting, reboot the Encoder is required.
Note: If NVR cannot play the video after the above setting, download a ONVIF testing tool from http://url.cn/2ESQRcn to the test the ONVIF feature on Encoder.
If the ONVIF feature is normal, please check the NVR settings.
Trouble Shooting
Cannot login in the WEB UI
If you cannot on open up the WEB UI, check the LAN port and see if it is lit up, if the LAN connection is fine, but you still cannot open up the page, check your IP address and see if your computer is in the network of
192.168.1.XX, if not here is the method for you to maunally check and change your IP address.
Check your IP address
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
13 / 18
Step 1. Press Windows + X
PowerShell keys together and open Windows
(or Command Prompt).
Step 2. Type ipconfig and hit Enter, then the information will be displayed in the window.
Manaully Change IP Address
Step 1. Click Start menu, then type
Control Panel
and click the option on the result.
Step 2. Open
Network and Internet
>
Network and Sharing Center
.
Step 3. On the left pane of the new window, click
Change adapter settings
.
Step 4. You will be displayed with
Network Connections
of the PC.
Important note
: Right click on “Ethernet” or “Local Area Connection” if you want to change IP of any physical connection. And right click on “WLAN” in case you wish to change IP of any wireless connections.
Step 5. Choose
Properties
after right clicking on the network name.
Step 6. Select the
Internet Protocol Version 4 (TCP/IPv4)
, then click
Properties
.
Step 7.
Obtain an IP Address automatically
should be selected by default, but please choose the
Use the Following IP Address
.
Step 8. Now put your desired IP Address according to your wish its correct format.
Change
Subnet mask and default gateway
if you want to.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
14 / 18
Cannot Play Video on VLC
If VLC Player does not play video after TS URL is typed in, check the Status of Encoder and see if there are video frames collected.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
15 / 18
If the signal collected is 0, please check the connection between input device and Encoder and check the HDMI indicator is lit up make sure they are correctly connected, and make sure the input source is supported on
Encoder.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
16 / 18
Contact Information
Warranty:
All video products are designed and tested to the highest quality standard and backed by full 1 years parts and labor warranty. Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush), and/or other unusual damages.
The customer shall pay shipping charges when unit is returned for repair.
Headquarter:
S601~609 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province,
P.R.C
● Tel:
+86-592-5771197
● Fax:
+86-592-5788216
● Customer Hotline:
4008-592-315
● Web:
~ http://www.rgblink.com
~ http://www.rgblink.cn
● E-mail:
[email protected]
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
[email protected]
|
www.rgblink.com
17 / 18
