Bosch Gas freestanding cooker Serie | 2 Instruction manual

Add to My manuals
28 Pages

advertisement

Bosch Gas freestanding cooker Serie | 2 Instruction manual | Manualzz

Free standing cooker

HGA243255M

[en] Instruction manual

Table of contents

[en]Instruction manual

Important safety information.....................................................4

Causes of damage......................................................................7

Damage to the oven...........................................................................7

Damage to the plinth drawer............................................................7

Set-up, gas and electricity connection.....................................7

Gas connection ...................................................................................7

Faults in the gas installation/smell of gas .....................................8

Moving the appliance by the gas line or door handle.................8

Electrical connection ..........................................................................8

Levelling the cooker ...........................................................................8

Wall fixing .............................................................................................8

Setting up the appliance ...................................................................8

Measures to be noted during transport..........................................8

Your new appliance ....................................................................9

General information............................................................................9

Cooking area .......................................................................................9

Control panel .................................................................................... 10

Your accessories......................................................................10

Inserting the accessories ............................................................... 11

Optional accessories ...................................................................... 11

After-sales service products .......................................................... 12

Before using the oven for the first time..................................12

Setting the time of day.................................................................... 12

Heating up the oven........................................................................ 12

Light the lower gas burner ............................................................. 12

Setting the gas grill.......................................................................... 12

Cleaning the accessories............................................................... 13

Making settings on the hob.....................................................13

Advance cleaning of burner cup and cap .................................. 13

Igniting the gas burners.................................................................. 13

Table – Cooking .............................................................................. 14

Suitable pans ............................................................................14

Precautions for use ......................................................................... 15

Setting the oven........................................................................15

This is how you adjust the lower gas burner in the oven ........ 15

Setting the gas grill.......................................................................... 16

Setting the timer .......................................................................16

Care and cleaning ....................................................................17

Cleaning agents ............................................................................... 17

Upper glass cover ........................................................................... 18

Detaching and refitting the rails .................................................... 19

Detaching and attaching the oven door...................................... 19

Removing and refitting the door panels...................................... 20

Oven door - Additional safety precautions.................................. 20

Troubleshooting .......................................................................21

Fault table.......................................................................................... 21

Replacing the bulb in the oven ceiling light ............................... 21

Glass cover ....................................................................................... 21

After-sales service ...................................................................21

E number and FD number ............................................................. 21

Energy and environment tips ..................................................22

Saving energy................................................................................... 22

Saving energy with the gas hob ................................................... 22

Environmentally-friendly disposal.................................................. 22

Tested for you in our cooking studio. ....................................22

Cakes and pastries ......................................................................... 22

Baking tips ........................................................................................ 23

Meat, poultry, fish, toast.................................................................. 24

Tips for roasting and grilling.......................................................... 24

Acrylamide in foodstuffs .........................................................24

Produktinfo

Additional information on products, accessories, replacement parts and services can be found at

www.bosch-home.com

and in the online shop

www.bosch-eshop.com

3

4

:

Important safety information

Read these instructions carefully. Only then will you be able to operate your appliance safely and correctly. Retain the instruction manual and installation instructions for future use or for subsequent owners.

These instructions are only valid if the appropriate country symbol appears on the appliance. If the symbol does not appear on the appliance, it is necessary to refer to the technical instructions which will provide the necessary instructions concerning modification of the appliance to the conditions of use of the country.

Appliance category:

Category 1

Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.

Only allow a licensed professional to connect the appliance and to convert the appliance to a different type of gas. The appliance must be installed (electric and gas connections) in accordance with the instruction and installation manual. An incorrect connection or incorrect settings may lead to serious accidents and damage to the appliance. The appliance manufacturer accepts no liability for damage of this kind. The appliance's warranty becomes void.

Caution:

This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

This appliance is intended for use up to a maximum height of 2000 metres above sea level.

Caution:

The use of a gas cooking appliance results in the production of heat, moisture and products of combustion in the room in which it is installed. Ensure that the kitchen is well ventilated especially when the appliance is in use: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).

Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.

This appliance is not designed for operation with an external timer or by remote control.

Do not use inappropriate child safety shields or hob guards. These can cause accidents.

This appliance may be used by children over the age of 8 years old and by persons with reduced physical, sensory or mental capabilities or by persons with a lack of experience or knowledge if they are supervised or are instructed by a person responsible for their safety how to use the appliance safely and have understood the associated hazards.

Children must not play with, on, or around the appliance. Children must not clean the appliance or carry out general maintenance unless they are at least 8 years old and are being supervised.

Keep children below the age of 8 years old at a safe distance from the appliance and power cable.

Always slide accessories into the cooking compartment correctly.

See "Description of accessories

in the instruction manual.

Risk of fire!

A draught is created when the appliance door is opened. Greaseproof paper may come into contact with the heating element and catch fire. Do not place greaseproof paper loosely over accessories during preheating. Always weight down the greaseproof paper with a dish or a baking tin. Only cover the surface required with greaseproof paper.

Greaseproof paper must not protrude over the accessories.

Combustible objects that are left in the cooking compartment may ignite. Never store combustible items in the cooking compartment. Never open the appliance door if there is smoke inside. Switch off the appliance and unplug the mains plug or switch off the fuse in the fuse box. Shut off the gas supply.

Risk of fire!

Hot oil and fat can ignite very quickly.

Never leave hot fat or oil unattended.

Never use water to put out burning oil or fat. Switch off the hotplate. Extinguish flames carefully using a lid, fire blanket or something similar.

Risk of fire!

The hotplates become very hot. Never place combustible items on the hob.

Never place objects on the hob.

Risk of fire!

The appliance becomes very hot, and flammable materials can easily catch fire.

Do not store or use any flammable objects (e.g. aerosol cans, cleaning agents) under or in the vicinity of the oven.

Do not store any flammable objects inside or on top of the oven.

Risk of fire!

When gas hotplates are in operation without any cookware placed on them, they can build up a lot of heat. The appliance and the extractor hood above it may become damaged or be set on fire.

Grease residue in the filter of the extractor hood may ignite. Only operate the gas burners with cookware on them.

The rear of the appliance becomes very hot. This may cause damage to the power cables. Electricity and gas lines must not come into contact with the rear of the appliance.

Never place flammable objects on the burners or store them in the cooking compartment. Never open the appliance door if there is smoke inside. Switch off the appliance. Pull out the mains plug or switch off the appliance at the circuit breaker in the fuse box. Shut off the gas supply.

Risk of fire!

The surfaces of the plinth drawer may become very hot. Only store oven accessories in the drawer. Flammable and combustible objects must not be stored in the plinth drawer.

Risk of burns!

The appliance becomes very hot. Never touch the interior surfaces of the cooking compartment or the heating elements.

Always allow the appliance to cool down.

Keep children at a safe distance.

Risk of serious burns!

Accessories and ovenware become very hot. Always use oven gloves to remove accessories or ovenware from the cooking compartment.

Alcoholic vapours may catch fire in the hot cooking compartment. Never prepare food containing large quantities of drinks with a high alcohol content. Only use small quantities of drinks with a high alcohol content. Open the appliance door with care.

Risk of burns!

The hotplates and surrounding area

(particularly the hob surround, if fitted) become very hot. Never touch the hot surfaces. Keep children at a safe distance.

During operation, the surfaces of the appliance become hot. Do not touch the surfaces when they are hot. Keep children away from the appliance.

Risk of burns!

Empty cookware becomes extremely hot when set on a gas hotplate that is in operation. Never heat up empty cookware.

Risk of burns!

The appliance becomes hot during operation. Allow the appliance to cool down before cleaning.

Risk of burns!

Caution:

Accessible parts may be hot when the grill is in use. Young children should be kept away from the appliance.

Risk of burns!

If the liquefied gas bottle is not upright, liquefied propane/butane can enter the appliance. Intense darting flames may therefore escape from the burners.

Components may become damaged and start to leak over time so that gas escapes uncontrollably. Both can cause burns.

Always use liquefied gas bottles in an upright position.

Risk of scalding!

The accessible parts become hot during operation. Never touch the hot parts. Keep children at a safe distance.

Risk of scalding!

When you open the appliance door, hot steam may escape. Open the appliance door with care. Keep children at a safe distance.

Water in a hot cooking compartment may create hot steam. Never pour water into the hot cooking compartment.

Risk of injury!

Scratched glass in the appliance door may develop into a crack. Do not use a glass scraper, sharp or abrasive cleaning aids or detergents.

Risk of injury!

Incorrect repairs are dangerous. Repairs may only be carried out, and damaged power and gas lines replaced, by an aftersales engineer trained by us. If the appliance is faulty, unplug the mains plug or switch off the fuse in the fuse box. Shut

5

off the gas supply. Contact the after-sales service.

Risk of injury!

Faults or damage to the appliance are dangerous. Never switch on a faulty appliance. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Shut off the gas supply.

Contact the after-sales service.

Unsuitable pan sizes, damaged or incorrectly positioned pans can cause serious injury. Observe the instructions which accompany the cookware.

Risk of injury!

Caution:

Glass lids may shatter when heated. Turn off all the burners before shutting the lid. Wait until the oven has cooled down before closing the glass cover.

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried out by one of our trained after-sales engineers. If the appliance is faulty, unplug the mains plug or switch off the fuse in the fuse box.

Contact the after-sales service.

The cable insulation on electrical appliances may melt when touching hot parts of the appliance. Never bring electrical appliance cables into contact with hot parts of the appliance.

Do not use any high-pressure cleaners or steam cleaners, which can result in an electric shock.

When replacing the cooking compartment bulb, the bulb socket contacts are live.

Before replacing the bulb, unplug the appliance from the mains or switch off the circuit breaker in the fuse box.

A defective appliance may cause electric shock. Never switch on a defective appliance. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. Contact the after-sales service.

Risk of injury!

If the appliance is placed on a base and is not secured, it may slide off the base. The appliance must be fixed to the base.

Risk of tipping!

Warning:

In order to prevent tipping of the appliance, this stabilizing means must be installed. Refer to the instructions for installation.

6

Causes of damage

Hob

Caution!

Only use the burners when cookware has been placed on top. Do not heat up empty pots or pans. The saucepan base will be damaged.

Only use pots and pans with an even base.

Place the pot or pan centrally over the burner. This will optimise transfer of the heat from the burner flame to the pot or ban base. The handle does not become damaged, and greater energy savings are guaranteed.

Ensure that the gas burners are clean and dry. The burner cup and burner cap must be positioned exactly.

Ensure that the top cover is not closed when the oven is started up.

Damage to the oven

Caution!

Accessories, foil, greaseproof paper or ovenware on the cooking compartment floor: do not place accessories on the cooking compartment floor. Do not cover the cooking compartment floor with any sort of foil or greaseproof paper.

Do not place ovenware on the cooking compartment floor if a temperature of over 50 ºC has been set. This will cause heat to accumulate. The baking and roasting times will no longer be correct and the enamel will be damaged.

Water in a hot cooking compartment: do not pour water into the cooking compartment when it is hot. This will cause

■ steam. The temperature change can cause damage to the enamel.

Moist food: do not store moist food in the cooking compartment when it is closed for prolonged periods This will damage the enamel.

Fruit juice: when baking particularly juicy fruit pies, do not pack the baking tray too generously. Fruit juice dripping from the baking tray leaves stains that cannot be removed. If possible, use the deeper universal pan.

Cooling with the appliance door open: only allow the cooking compartment to cool when it is closed. Even if the appliance door is only open a little, front panels of adjacent units could be damaged over time.

Very dirty door seal: If the door seal is very dirty, the appliance door will no longer close properly when the appliance is in use. The fronts of adjacent units could be damaged.Always keep the door seal clean.

Appliance door as a seat, shelf or worktop: Do not sit on the appliance door, or place or hang anything on it. Do not place any cookware or accessories on the appliance door.

Inserting accessories: depending on the appliance model, accessories can scratch the door panel when closing the appliance door. Always insert the accessories into the cooking compartment as far as they will go.

Carrying the appliance: do not carry or hold the appliance by the door handle. The door handle cannot support the weight of the appliance and could break.

Damage to the plinth drawer

Caution!

Do not place hot objects in the plinth drawer. It could be damaged.

Set-up, gas and electricity connection

Gas connection

Installation must only be performed by an approved expert or a licensed after-sales service engineer in accordance with the instructions specified under "Gas connection and conversion to a different gas type".

For the licensed expert or after-sales service

Caution!

The setting conditions for this appliance are specified on the rating plate on the back of the appliance. The gas type set in the factory is marked with an asterisk (*).

Before setting up the appliance, check the grid access conditions (gas type and gas pressure) and ensure that the gas setting of the appliance meets these conditions. If the appliance settings have to be changed, follow the instructions in the section "Gas connection and conversion to a different gas type".

This appliance is not connected to a waste gas main. It must be connected and commissioned in accordance with the

■ installation conditions. Do not connect the appliance to a waste gas main. All ventilation regulations must be observed.

The gas connection must be made via a fixed, i.e. not mobile connection (gas line) or via a safety hose.

If using the safety hose, ensure that the hose is not trapped or crushed. The hose must not come into contact with hot surfaces.

The gas line (gas pipe or safety hose) can be connected to the right or left-hand side of the appliance. The connection must have an easily accessible locking device.

Safety information

The nominal operating pressure of the appliance is;

For natural gas (G20) 20 mBar, for LPG (G30) 30 mBar, for

LPG (G31) 37 mBar. The appliance must be operated at these pressure values. All data on the rating plate of your appliance relates to these pressure values. The manufacturer is not responsible for results, performance or any risk caused by operating the appliance at different values.

7

:

If the gas pressure in your gas supply grid!

for natural gas (G20) is higher than 25 mBar, for LPG (G30) is higher than 36 mBar, for LPG (G31) is higher than 45 mBar, you must use your appliance in connection with a suitable gas regulator, for safety reasons. Connection, maintenance and configuration of the gas regulator must be performed by an authorised installation expert. If you do not know the gas pressure in your gas supply grid, please ask your local supply grid operator.

Faults in the gas installation/smell of gas

If you notice a smell of gas or faults in the gas installation, you must

■ immediately shut off the gas supply and/or close the gas cylinder valve immediately extinguish all naked flames and cigarettes switch off electrical appliances and lights open windows and ventilate the room call the after ­ sales service or the gas supplier

Moving the appliance by the gas line or door handle

Do not move the appliance while holding the gas line; the gas pipe could be damaged. There is a risk of a gas leak! Do not move the appliance while holding it by the door handle. The door hinges and door handle could be damaged.

Electrical connection

Caution!

Have the appliance set up by your after-sales service. A 16 A fuse is required for connection. The appliance is designed for operation at 220-240 V.

If the electricity supply drops below 180 V, the electrical ignition system does not work.

Any damage arising from the appliance being connected incorrectly will invalidate the guarantee.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

For the after-sales service

Caution!

The appliance must be connected in accordance with the data on the rating plate.

Only connect the appliance to an electrical connection that meets the applicable provisions. The socket must be easily accessible so that you can disconnect the appliance from the electricity supply if necessary.

Please ensure the availability of a multi-pin disconnecting system.

Never use extension cables or multiple plugs.

For safety reasons, this appliance must only be connected to an earthed connection. If the safety earth terminal does not comply with regulations, safety against electrical hazards is not guaranteed.

You must use a H 05 W-F type cable or equivalent for the appliance connection.

Levelling the cooker

Always place the cooker directly on the floor.

1.

Pull out the plinth drawer and lift it up and out.

There are adjustable feet at the front and rear on the inside of the plinth.

2.

Use an Allen key to raise or lower the adjustable feet as necessary until the cooker is level (picture A).

3.

Push the plinth drawer back in (picture B).

$ %

Wall fixing

To prevent the cooker from tipping over, you must fix it to the wall using the enclosed bracket. Please observe the installation instructions for fixing the oven to the wall.

Setting up the appliance

0LQ

The appliance must be set up directly on the kitchen floor and in line with the specified dimensions. The appliance must not be set up on any other object.

The distance between the top edge of the oven and the bottom edge of the extractor hood must meet the requirements of the extractor hood manufacturer.

Ensure that the appliance is not moved again after set up.

The distance from the high output burner or wok burner to the fronts of the adjacent units or the wall must be at least 50 mm.

Measures to be noted during transport

Secure all mobile parts in and on the appliance using an adhesive tape that can be removed without leaving any traces.

Push all accessories (e.g. baking tray) into the corresponding slots with cardboard at the edges, in order to avoid damaging the appliance. Place cardboard or similar between the front and rear side to prevent knocks against the inside of the glass door.

Secure the door and, if available, the top cover to the appliance sides using adhesive tape.

Keep the original appliance packaging. Only transport the appliance in the original packaging. Observe the transport arrows on the packaging.

8

If the original packaging is no longer available

pack the appliance in protective packaging to guarantee sufficient protection against any transport damage.

Transport the appliance in an upright position. Do not hold the appliance by the door handle or the connections on the rear, as these could be damaged. Do not place any heavy objects on the appliance.

Your new appliance

In this section you will find information on the appliance, the operating modes and the accessories.

General information

The design depends on the respective appliance model.

Cooking area

Here is an overview of the control panel. The design depends on the respective appliance model.

Explanations

1* Hob cover**

2* Steam outlet

3

4

5*

6

Caution!

When the oven is in operation, hot steam escapes here.

Hob**

Control panel**

Cooling fan

Oven door**

7* Plinth drawer**

* Optional (available for some appliances)

** Depending on the appliance model, details may vary.

4

5

2

3

Explanations

1 Steam outlet

Caution!

During oven operation, hot steam escapes at this point

Standard burner

Standard burner

High output burner

Economy burner

9

Control panel

Here you can see an overview of the control panel. The design depends on the respective appliance model.

Light button

This button switches on the oven light.

To switch it off, press the multi-function button again.

2

3

4

Explanations

1 Switch for the gas burner (function selector)

Multi-function button

Cooker switch

Operating switches and display panel

Function selector

By turning the function selector anti-clockwise, you can set the temperature for the oven. By turning it clockwise, you can select the grill function.

Settings

(

Function

ÿ

Zero position Oven not hot.

8

Ignition position For igniting gas from the oven's lower gas burner or from the grill.

170-270 Temperature range

Temperature range in °C for baking cakes in tins, pizza on the baking tray, biscuits, etc.

Grill setting Dishes are grilled at maximum heat with this setting.

Heat setting for the lower burner: 3 kW

Heat setting of the oven gas grill: 2.1 kW

Burner knob

You can adjust the heat setting of the hotplates using the four burner knobs.

Positions

þ

Zero position

8

Ignition position

˜

Settings area

Function/gas oven

The oven is switched off.

Ignition position

Large flame = highest setting

Economy flame = lowest setting

There is a limit stop at the end of the settings area. Do not turn the timer beyond this.

Buttons and display

The buttons are used to select the various additional functions.

In the display, you can read the values that you have set.

Button

0

Clock button

A

@

Minus button

Plus button

Function

Use this button to set the timer and the x

cooking time.

Use this button to adjust the set value downwards.

Use this button to adjust the set value upwards.

Your accessories

The accessories supplied with your appliance are suitable for making many meals. Ensure that you always insert the accessories into the cooking compartment the right way round.

There is also a selection of optional accessories, with which you can improve on some of your favourite dishes, or simply to make working with your oven more convenient.

Wire rack

For cookware, cake tins, roasts, grilling and frozen meals.

Insert the wire rack with the open side facing the oven door and the curvature pointing downwards

¾

.

Enamel baking tray

For cakes and biscuits.

Push the baking tray into the oven with the sloping edge facing towards the oven door.

Protecting plate

For use during grilling.

You must use the protecting plate when grilling to protect the control panel and control knob from high temperatures.

Note:

The protecting plate is kept in the plinth drawer.

10

Inserting the accessories

The accessories can be inserted in the oven at 5 different levels. Always slide the accessories fully in to avoid them coming into contact with the oven's glass door.

The accessories can be pulled out approximately halfway without tipping. This allows meals to be taken out easily.

When placing the accessories into the oven, check that the indentation is at the back. They can only lock correctly in place in this position.

Note:

Heat may cause the accessories to deform. As soon as the accessories cool down, they regain their original shape.

Their function is not adversely affected.

Hold the baking tray securely on the sides with both hands and push it parallel into the frame. Avoid movements to the right or left when pushing the baking tray in. Otherwise, it will be difficult to push the tray in and the enamelled surfaces could be damaged.

You can buy accessories from the after-sales service, from specialist retailers or online. Please specify the HEZ number.

Optional accessories

You can buy optional accessories from your after-sales service or from specialist retailers. You will find a variety of suitable products for your oven in our brochures and on the Internet.

The availability of optional accessories and the options for ordering them on the internet vary depending on the country.

Information on purchasing accessories can be found in the sales documents.

Not every optional accessory is suitable for every appliance.

When making a purchase, always quote the full name (E no.) of your appliance.

Optional accessories

Pizza tray

Insert wire rack

Grill tray

Baking stone

Enamel baking tray

Enamel baking tray with non-stick coating

Universal pan

Universal pan with non-stick coating

Lid for the Profi extra-deep pan

Profi extra-deep pan with insert wire rack

HEZ number

HEZ317000

HEZ324000

HEZ325000

HEZ327000

HEZ331003

HEZ331011

HEZ332003

HEZ332011

HEZ333001

HEZ333003

Function

Particularly good for pizza, frozen meals and round tarts. You can use the pizza tray instead of the universal pan. Slide the tray in above the wire rack and proceed according to the instructions in the tables.

For roasting. Always place the grill wire rack on the universal pan. This ensures that dripping fat and meat juices are collected.

Used for grilling instead of the grill wire rack or used as a splatter guard to protect the oven from becoming heavily soiled. Only use the grill tray with the universal pan.

Grilling on the grill tray: only shelf positions 1, 2 and 3 can be used.

The grill tray as a splash guard: the universal pan is inserted together with the grill tray under the wire rack.

The baking stone is perfect for preparing home-made bread, bread rolls and pizzas which require a crispy base. The baking stone must always be preheated to the recommended temperature.

For cakes and biscuits.

Place the baking tray in the oven with the sloping edge towards the oven door.

The baking tray is ideal for laying out cakes and biscuits. Place the baking tray in the oven with the sloping edge towards the oven door.

For moist cakes, pastries, frozen meals and large roasts. Can also be used under the wire rack to catch fat or meat juices.

Place the universal pan in the oven with the sloping edge towards the oven door.

This universal pan is ideal for moist cakes, pastries, frozen meals and large roasts. Place the universal pan in the oven with the sloping edge towards the oven door.

The lid converts the Profi extra-deep pan into the Profi roasting dish.

Particularly suitable for preparing large quantities of food.

11

Optional accessories

Wire rack

Glass roasting dish

HEZ number

HEZ334000

HEZ915001

Function

For ovenware, cake tins, roasts, grilling and frozen meals.

The glass roasting dish is suitable for pot roasts and bakes.

Ideal for programmes and automatic roasting.

After-sales service products

You can obtain suitable care and cleaning agents and other accessories for your domestic appliances from the after-sales service, specialist retailers or (in some countries) online via the e ­ Shop. Please specify the relevant product number.

Cleaning cloths for stainless-steel surfaces Product no. 311134 Reduces the build-up of dirt. Impregnated with a special oil for perfect maintenance of your appliance's stainless-steel surfaces.

Oven and grill cleaning gel Product no. 463582 For cleaning the cooking compartment. The gel is odourless.

Microfibre cloth with honeycomb structure Product no. 460770 Especially suitable for cleaning delicate surfaces, such as glass, glass ceramic, stainless steel or aluminium. The microfibre cloth removes liquid and grease deposits in one go.

Door lock Product no. 612594 To prevent children from opening the oven door. The locks on different types of appliance door are screwed in differently.

See the information sheet supplied with the door lock.

Before using the oven for the first time

In this section, you can find out what you must do before using your oven or gas hob to prepare food for the first time. First read the section on

Safety information

.

Setting the time of day

When you connect the power for the first time, the lights up.

x

symbol

1.

Make sure that the x

is flashing in the display.

2.

Press the

0

button.

The display goes dark.

You can use the oven clock as a timer. How to set the timer is explained on the following pages.

Caution!

The clock runs independently of the lower gas burner and gas grill.

The oven clock can be used as a timer.

The clock runs independently of the oven.

The clock has no effect on the gas supply to the lower gas burner and grill burner. The gas supply is interrupted if the switch is turned off.

Heating up the oven

To remove the new cooker smell, heat up the oven when it is empty and closed. Ensure that no packaging material has been left in the cooking compartment.

Keep the kitchen ventilated the whole time the oven is on.

Light the lower gas burner

1.

Open the top cover. The top cover must remain open for as long as the oven is in operation.

2.

Open the main gas supply to the appliance. Connect the plug to the socket. Open the oven door.

3.

Press the switch for the lower gas burner and turn it anticlockwise to the

8

ignition position.

The gas escaping from the oven's lower gas burner is ignited using the ignition button.

4.

Continue to hold the switch for the lower burner depressed and turn it to 270 °C.

To activate the safety ignition, press and hold the lower gas burner on the oven for 10 seconds.

5.

Look through the inspection port to make sure that the flame is lit. If it is not, repeat the process from step 3.

6.

Close the oven door slowly.

7.

Turn off the switch for the lower gas burner after 30 minutes.

Setting the gas grill

1.

Open the top cover. The top cover must remain open for as long as the cooker is in operation.

2.

Turn on the main gas supply to the appliance. Insert the plug into the socket.

12

3.

Insert the protecting plate into the groove below the control panel.

Insert the protecting plate with the longer edge at the front and the curvature at the bottom.

6.

Keep the function selector pressed in and turn it to the grill setting ( .

Keep the function selector pushed in for 10 seconds so that the safety pilot starts up. The gas coming from the gas grill is ignited.

Secure the protecting plate in the groove below the control panel using the retainers.

Ensure that the protecting plate is engaged in the retainers. If the protecting plate cannot be pulled out, it is engaged correctly. You can now safely use the protecting plate. If it can be removed, insert it into the groove at a slightly higher angle and make sure that it engages in the retainers.

4.

Close the oven door so that it is as close as possible to the protecting plate.

5.

Push in the function selector and turn it clockwise to the ignition position 8 .

7.

Check whether the flame is lit. If the flame goes out, repeat the process from step 5.

8.

Switch off the function selector after 30 minutes. Once the oven has cooled down, remove the protecting plate.

Caution!

The gas grill only works when the protecting plate is inserted.

Make sure that the protecting plate is correctly inserted.

Cleaning the accessories

Before you use the accessories for the first time, clean them thoroughly with hot soapy water and a soft dish cloth.

Making settings on the hob

Your hob is equipped with four gas burners. The following information explains how to light the gas burners and set the size of flame.

Advance cleaning of burner cup and cap

Clean the burner cap (1) and cup (2) with water and washingup liquid. Dry the individual parts carefully.

Place the burner cup and cap back on the burner shell (5).

Ensure that the igniter (3) and flame safety pin (4) are not damaged.

The nozzle (6) must be dry and clean. Always position the burner cap exactly over the burner cup.

Igniting the gas burners

Always position the burner cap exactly onto the burner cup. The openings in the burner cup must remain unobstructed at all times. All parts must be dry.

1.

Open the upper cooker cover. The upper cover must remain open whilst the cooker is in operation.

2.

Turn the control for the required hotplate anti-clockwise to the ignition position 8 . This starts the ignition process.

3.

Press and hold the hotplate control for 1-3 seconds. Gas begins to flow out and the gas burner ignites.

The safety pilot is activated. If the gas flame goes out, the gas supply is automatically cut off by the safety pilot.

4.

Set the required flame size. Between the Off þ setting and the

— setting, the flame is not stable. Therefore, always choose a setting between the large flame — and small flame ˜ .

5.

If the flame goes out again, repeat the process from step 2.

6.

To finish cooking, turn the hotplate control clockwise to the

Off þ position.

The hotplate control should not be turned to the ignition position for longer than 15 seconds. If the burner does not light within 15 seconds, wait at least one minute. Then repeat the ignition process.

:

Caution!

If, after switching the cooker off, you turn the burner control while the cooker is still hot, gas will escape. If you do not turn the hotplate control to the ignition position

8

within 60 seconds, the gas supply will be cut off.

The gas burner does not ignite

If there is a power cut or if the ignition plugs are damp, you can light the gas burners with a gas lighter or a match.

13

Table – Cooking

Select the right pan size for each hotplate. The diameter of the pot or pan base should be the same as that of the hotplate.

Cooking times may vary depending on the type of food, its weight and quality. You yourself can best judge the optimal cooking time.

Use as little water as possible when cooking, so that the food retains its vitamins and minerals. Select short cooking times so that the vegetables remain firm and full of nutrients.

Example

Melting

Warming

Heating and keeping warm

Steaming*

Food Hotplate

Chocolate, butter, margarine Economy burner

Stock, tinned vegetables

Soups

Fish

Standard burner

Electric hotplate**

Economy burner

Electric hotplate**

Standard burner

Electric hotplate**

Heat setting

Small flame

Small flame

1-2

Small flame

1-2

Between large and small flame

3-4

Braising

Boiling

*

* Potatoes and other vegetables, meat

Rice, vegetables, meat dishes

(with sauces)

Standard burner

Electric hotplate**

Standard burner

Electric hotplate**

Between large and small flame

3-4

High flame

5-6

Roasting

Pancakes, potatoes, schnitzel, fish fingers

High-output burner**

Wok burner**

* If you are using a pan with a lid, turn the flame down as soon as it reaches boiling point.

Between large and small flame

** Optional. Available for some appliances, depending on the appliance model (for frying on the wok burner, we recommend that you use a wok)

Suitable pans

Burner/electric hotplate

Electric hotplate* 14.5 cm

Wok burner** 3.6 kW 24 cm

High output burner

3kW

Standard burner 1.7 kW

Minimum pan diameter

24 cm

18 cm

Maximum pan diameter

14.5 cm

28 cm

28 cm

24 cm

Economy burner 1 kW 12 cm 18 cm

* Option (for models with an electric hotplate)

** Option (for models with a wok burner)

14

Precautions for use

The following advice is intended to help you save energy and prevent pan damage:

Use pans which are the right size for each burner.

Do not use small pans on large burners. The flame must not touch the sides of the pan.

Do not use damaged pans, which do not sit evenly on the hob. Pans may tip over.

Only use pans with a thick, flat base.

Do not cook without using a lid and make sure the lid is properly fitted. This wastes energy.

Always place the ovenware centrally over the burner.

Otherwise, there is a risk that it may tip over.

Place the pans on the pan supports, never directly on the burner.

Make sure that the pan supports and burner caps are correctly positioned before using the appliance.

Pans should be placed on the hob carefully.

Do not strike the hob and do not place excessive weight on it.

Never use two burners or heat sources to heat one single pan.

Do not use grill pans, earthenware casserole dishes, etc. for a long period of time on maximum power.

Setting the oven

Here you can find out how to set the oven.

This is how you adjust the lower gas burner in the oven

When the lower gas burner is lit, you can bake on a baking sheet with the oven door closed.

Example in the picture: Baking at 170 °C

1.

Open the top cover. The top cover must remain open for as long as the oven is in operation.

2.

Open the main gas supply to the appliance. Connect the plug to the socket. Open the oven door.

3.

Press the function selector and turn it anti-clockwise to the ignition 8 position.

The gas escaping from the oven's lower gas burner is ignited using the ignition button.

4.

Continue to hold the function selector depressed and turn it to 170 °C.

To activate the safety ignition, press and hold the function selector for 10 seconds.

7.

Preheat the empty oven for approximately 15 minutes before baking.

8.

When the dish has finished cooking, switch the function selector off.

You can change the temperature at any time.

:

Please note:!

The ignition device should not be actuated for more than 15 seconds. If the burner does not light within 15 seconds, wait for at least one minute. Then repeat the ignition process.

5.

Look through the inspection port to make sure that the flame is lit. If it is not, repeat the process from step 3.

6.

Close the oven door slowly.

15

Setting the gas grill

1.

Open the top cover. The top cover must remain open for as long as the cooker is in operation.

2.

Turn on the main gas supply to the appliance. Insert the plug into the socket.

3.

Insert the protecting plate into the groove below the control panel.

Insert the protecting plate with the longer edge at the front and the curvature at the bottom.

6.

Keep the function selector pressed in and turn it to the grill setting ( .

Keep the function selector pushed in for 10 seconds so that the safety pilot starts up. The gas coming from the gas grill is ignited.

Secure the protecting plate in the groove below the control panel using the retainers.

Ensure that the protecting plate is engaged in the retainers. If the protecting plate cannot be pulled out, it is engaged correctly. You can now safely use the protecting plate. If it can be removed, insert it into the groove at a slightly higher angle and make sure that it engages in the retainers.

4.

Close the oven door so that it is as close as possible to the protecting plate.

5.

Push in the function selector and turn it clockwise to the ignition position 8 .

7.

Check whether the flame is lit. If the flame goes out, repeat the process from step 5.

8.

Once the food is cooked, switch off the function selector.

Once the oven has cooled down, remove the protecting plate.

:

Caution!

The burner knob should not be actuated for longer than 15 seconds in the ignition position. If the burner does not ignite within 15 seconds, wait at least one minute. Then repeat the process to light the burner.

Caution!

The gas grill only works when the protecting plate is inserted.

Make sure that the protecting plate is correctly inserted.

Setting the timer

You can use the timer as a kitchen timer. It runs independently of the oven. The timer has a special signal. This means that you can tell whether the timer or cooking time has expired.

Setting procedure

1.

Press the

The

0 Clock button.

S timer symbol flashes.

2.

Use the + or - button to set the timer time.

+ button / default value = 10 minutes

- button / default value = 5 minutes

The timer starts after a few seconds. The the display. The elapsed time is shown.

S symbol appears in

The time has elapsed

A signal sounds. Press the goes out.

0 Clock button. The timer display

Changing the timer duration

Press the Clock button. Use the + or - button to change the time.

Cancelling the setting

Press the 0 Clock button. Press the - button repeatedly until a zero appears in the display.

The timer and cooking time count down at the same time

The symbols light up. You can see the timer time counting down in the display.

To query the

Press the 0 x remaining time:

button.

The queried value appears in the display for a few seconds.

16

Care and cleaning

With attentive care and cleaning, your hob and oven will retain its looks and remain in good working order for a long time. We will explain here how you should care for and clean them correctly.

Notes

Slight differences in the colours on the front of the oven are caused by the use of different materials, such as glass, plastic and metal.

Shadows on the door panel which look like streaks, are caused by reflections made by the oven light.

Enamel is baked on at very high temperatures. This can cause some slight colour variations. This is normal and does not affect operation. The edges of thin trays cannot be completely enamelled. As a result, these edges can be rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the wrong cleaning agent can be avoided by observing the following instructions.

When cleaning the hob do not use

■ undiluted washing-up liquid or dishwasher detergent,

■ scouring pads, abrasive cleaning agents such as oven cleaner or stain remover, high-pressure cleaners or steam jets.

Do not clean individual parts in the dishwasher.

When cleaning the oven do not use

■ sharp or abrasive cleaning agents,

■ cleaning agent with a high alcohol content, scouring pads,

■ high-pressure cleaners or steam jets.

Do not clean individual parts in the dishwasher.

Wash new sponges thoroughly before first use.

Zone

Stainless steel surfaces*

(depending on appliance model)

Cleaning agent

Hot soapy water:

Clean with a dish cloth and dry with a soft cloth. On stainless steel surfaces, always wipe parallel to the natural grain.

Otherwise, you may scratch the surface.

Remove patches and splashes of limescale, grease, starch and albumin (e.g. egg white) immediately. Corrosion can form under such patches and splashes.

Special care products suitable for hot stainless steel surfaces are available from our after-sales service and from specialist retailers. Apply a thin layer of care product with a soft cloth.

Enamel, painted, plastic and screenprinted surfaces*

(depending on appliance model)

Hot soapy water:

Clean with a dish cloth and dry with a soft cloth. Do not use glass cleaner or glass scrapers for cleaning.

Control panel Hot soapy water:

Clean with a dish cloth and dry with a soft cloth. Do not use glass cleaner or glass scrapers for cleaning.

* Optional (available for some appliances, depending on the appliance model)

Zone

Upper glass cover*

(depending on appliance model)

Rotary knobs

Do not remove.

Hob surround

Gas hob and pan supports*

(depending on appliance model)

Gas burners*

(depending on appliance model)

Electric hotplate*

(depending on appliance model)

Hotplate ring*

(depending on appliance model)

Ceramic hob*

(depending on appliance model)

Cleaning agent

Glass cleaner:

Clean with a soft cloth.

You can remove the upper glass cover for cleaning. To find out how to do this, please refer to the section

Upper glass cover

.

Hot soapy water:

Clean with a dish cloth and dry with a soft cloth.

Hot soapy water:

Do not clean with a glass scraper, lemon juice or vinegar.

Hot soapy water.

Use very little water. Water must not be allowed to enter the appliance through the base of the burners.

Clean off boiled-over liquids and spilt food immediately.

You can remove the pan supports.

Cast iron pan supports*:

Do not clean in the dishwasher.

Remove the burner head and cap and clean with hot soapy water.

Do not clean in the dishwasher.

The gas outlet openings must remain unobstructed at all times.

Ignition plugs: Small, soft brush.

The gas burners only work properly when the ignition plugs are dry. Dry all parts thoroughly. Ensure that they are refitted correctly.

The burner caps are coated in black enamel. The colour may change over time. This does not impair their performance.

Abrasive materials or sponges:

Briefly heat up the hotplate afterwards, so that it dries. Hotplates can rust over time if they remain wet. Apply care product to finish.

Clean off boiled-over liquids and spilt food immediately.

Remove yellow to blue iridescent discolouration from the hotplate ring with a steel care product.

Do not use any abrasive materials that may scratch surfaces.

Care: Protective/care products for ceramics

Cleaning: Cleaning agents suitable for ceramics.

Follow the cleaning instructions on the packaging.

: Glass scraper for stubborn dirt:

Remove the protective cover and clean using the blade only. Caution: The blade is very sharp. Risk of injury.

Cover the blade again after cleaning.

Replace damaged blades immediately.

* Optional (available for some appliances, depending on the appliance model)

17

Zone

Glass hob*

(depending on appliance model)

Glass panel

Childproof lock*

(depending on appliance model)

Seal

Do not remove.

Cooking zone

Cleaning agent

Care: Protective/care products for glass

Cleaning: Cleaning agents for glass.

Follow the cleaning instructions on the packaging.

: Glass scraper for stubborn dirt:

Remove the protective cover and clean using the blade only. Caution: The blade is very sharp. Risk of injury.

Cover the blade again after cleaning.

Replace damaged blades immediately.

Glass cleaner:

Clean with a soft cloth.

Do not use the glass scraper.

The door can be removed to facilitate cleaning. To find out how to do this, please refer to the section

Removing and refitting the oven door

.

Hot soapy water:

Clean with a dish cloth.

If a childproof lock has been fitted to the oven door, it must be removed before cleaning.

If it is very dirty, the childproof lock will not work properly.

Hot soapy water:

Clean with a dish cloth. Do not scour.

Hot soapy water or a vinegar solution:

Clean with a dish cloth.

For stubborn dirt, use a stainless steel scouring pad or oven cleaner.

Only use when the cooking compartment is cold.

:

Please use the self-cleaning function to clean self-cleaning surfaces. To find out how to do this, please refer to the section

Self-cleaning

.

Caution! Never use oven cleaner on selfcleaning surfaces.

Hot soapy water:

Clean with a dish cloth.

Glass cover for the oven light

Shelf Hot soapy water:

Clean with a dish cloth or a brush.

You can remove the shelves for cleaning.

To find out how to do this, please refer to the section

Removing and refitting shelves

.

Telescoping extension rails*

(depending on appliance model)

Hot soapy water:

Clean with a dish cloth or a brush.

Do not remove the lubricant from the extension rails. It is best to clean them when they are pushed in. Do not soak, clean in the dishwasher, or clean in the oven as part of the self-cleaning programme. This may damage the shelves and they may no longer work properly as a result.

* Optional (available for some appliances, depending on the appliance model)

Zone

Accessories

Cleaning agent

Hot soapy water:

Soak and then clean with a dish cloth or a brush.

Aluminium baking tray*:

(depending on appliance model)

Dry with a soft cloth.

Do not clean in the dishwasher.

Never use oven cleaner.

To prevent scratches, never touch the metal surfaces with a knife or a similar sharp object.

Harsh cleaning products, scratchy sponges and rough cleaning cloths are not suitable. Otherwise, you may scratch the surface.

Rotary spit*

(depending on appliance model)

Hot soapy water:

Clean with a dish cloth or a brush. Do not clean in the dishwasher.

Meat thermometer*

(depending on appliance model)

Hot soapy water:

Clean with a dish cloth or a brush. Do not clean in the dishwasher.

Plinth drawer*

(depending on appliance model)

Hot soapy water:

Clean with a dish cloth.

* Optional (available for some appliances, depending on the appliance model)

Upper glass cover

Before opening the top cover, remove any spills with a cloth.

Use glass cleaner if possible.

For cleaning, remove the top cover. To do this, hold the cover securely on both sides with both hands and pull it upwards.

If the cover hinges become loose, note the letters marked on them. The hinge with the letter R must be fitted on the right, and the hinge with the letter L must be fitted on the left.

After cleaning, re-assemble the top cover following the same procedure in reverse order.

Only close the top cover once the burners have cooled down.

18

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have cooled down.

Unhooking the rails

1.

Hold the shelf frames from underneath and pull slightly forward. Pull the extension pins at the bottom of the rails out of the mounting holes (Fig. A).

2.

Then fold the rails upwards and carefully remove them

(Fig. B).

$

%

2.

the two hooks must be inserted fully into the upper holes.

Now move the frame slowly and carefully downwards and insert in the lower holes (figure D).

3.

Insert both frames into the side walls of the oven (figure E).

If the rails are fitted correctly, the distance between the two upper shelf positions is greater.

'

(

Clean the rails with washing-up liquid and a sponge. For stubborn deposits of dirt, use a brush.

Installing the frames

1.

Insert the two hooks carefully into the upper holes. (Figure A-

B)

$ %

Detaching and attaching the oven door

For cleaning purposes and to remove the door panels, you can detach the oven door.

The oven door hinges each have a locking lever. When the locking levers are closed (figure A), the oven door is secured in place. It cannot be detached. When the locking levers are open in order to detach the oven door (Fig. B), the hinges are locked.

They cannot snap shut.

$ %

&

:

Incorrect assembly!

Never move the frame before the two hooks are fully anchored in the upper holes. The enamel could be damaged and may break (figure C).

:

Risk of injury!

Whenever the hinges are not locked, they snap shut with great force. Ensure that the locking levers are always fully closed or, when detaching the oven door, fully open.

Detaching the door

1.

Open the oven door fully.

2.

Fold up the two locking levers on the left and right (figure A).

3.

Close the oven door as far as the limit stop. With both hands, grip the door on the left and right-hand sides. Close the door a little further and pull it out (figure B).

$ %

19

Attaching the door

Reattach the oven door in the reverse sequence to removal.

1.

When attaching the oven door, ensure that both hinges are inserted straight into the opening (figure A).

2.

The notch on the hinge must engage on both sides (figure B).

$ %

Fitting

1.

Hold the top glass panel firmly by the sides and slide it in towards the back at an angle. The panel must be inserted into the openings on the lower side. The smooth surface must face outwards, while the roughened side must be on the inside. (Fig. A).

$

3.

Fold back both locking levers (figure C). Close the oven door.

&

:

Risk of injury!

If the oven door falls out accidentally or a hinge snaps shut, do not reach into the hinge. Call the after ­ sales service.

Removing and refitting the door panels

The glass panels can be removed from the oven door to allow more thorough cleaning.

Removal

1.

Removing the oven door See the section

Removing the oven door

. Lay the oven door on a cloth with the handle facing downwards.

2.

Remove the cover from the top of the oven door. To do this, press with your fingers on the left and right-hand side. Pull out the cover (Fig. A).

3.

Raise the top panel and pull it out (Fig. B).

$ %

2.

Place the cover on the top of the oven door and press in place. Make sure that the grooves along the sides lock into position.

3.

Refitting the oven door See the section

Refitting the oven door

.

Do not use the oven again until the panels have been correctly fitted.

Oven door - Additional safety precautions

During long cooking times, the oven door may become very hot.

If you have small children, extra supervision is required during oven operation.

In addition, there is a protective device (protective grid) which prevents direct contact with the oven door. You can purchase this optional accessory (469088) from the after-sales service.

Clean the panels with glass cleaner and a soft cloth.

:

Risk of injury!

Scratched glass in the appliance door may develop into a crack. Do not use a glass scraper, sharp or abrasive cleaning aids or detergents.

20

Troubleshooting

Malfunctions often have simple explanations. Refer to the table before calling the after-sales service as you may be able to remedy the fault yourself.

Fault table

If a dish does not turn out as well as you had hoped, refer to the chapter:

Tested for you in our cooking studio.

It contains useful tips and information on cooking, baking and roasting.

:

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried out by one of our trained after-sales engineers.

Fault

The oven does not work.

Possible cause Troubleshooting/information

Faulty circuit breaker

Power cut.

Look in the fuse box and check that the circuit breaker is in working order.

Check whether the kitchen light or other kitchen appliances are working.

Reset the clock.

flashes in the clock display.

Power cut.

Oven not hot.

Dust on the contacts.

The burner does not ignite.

The gas grill does not work.

Power cut or damp ignition plugs.

The protecting plate is incorrectly inserted.

Turn the control knobs clockwise and anti-clockwise a few times.

Light the gas burner with a gas lighter or a match.

Make sure that the protecting plate is correctly inserted.

Remove the protecting plate and reinsert it.

Replacing the bulb in the oven ceiling light

If the bulb in the oven light fails, it must be replaced. Heatresistant, 25 watt spare bulbs can be obtained from our aftersales service or a specialist retailer. Only use these bulbs.

:

Risk of electric shock!

Switch off the circuit breaker in the fuse box.

1.

Place a tea towel in the cold oven to prevent damage.

2.

Unscrew the glass cover by turning it anti-clockwise.

3.

Replace the bulb with one of the same type.

4.

Screw the glass cover back in.

5.

Remove the tea towel and switch on the circuit breaker.

Glass cover

You must replace a damaged glass cover. Suitable glass covers may be obtained from the after-sales service. Please specify the E number and FD number of your appliance.

After-sales service

Our after-sales service is there for you if your appliance needs to be repaired. We will always find the right solution in order to avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. The rating plate containing these numbers can be found on the right-hand side of the oven door. You can make a note of the numbers of your appliance and the telephone number of the after-sales service in the space below to save time should it be required.

E no.

FD no.

After-sales service

O

Please note that there will be a fee for a visit by a service technician in the event of a malfunction, even during the warranty period.

After-sales contact details for all countries can be found in the attached after-sales service directory.

21

Energy and environment tips

Here you can find tips on how to save energy when baking and roasting in the oven and when cooking on the hob, and how to dispose of your appliance properly.

Saving energy

Only preheat the oven if this is specified in the recipe or in the tables in the instruction manual.

Use dark, black lacquered or enamelled baking tins, because they absorb heat particularly well.

Open the oven door as infrequently as possible while the food is baking and roasting.

For longer cooking times, the oven can be turned off

10 minutes before the end of the cooking time, and the meal can be finished using residual heat.

Saving energy with the gas hob

Always use a saucepan which is the correct size for your food. A larger, less full saucepan requires a lot of energy.

Always place a suitable lid on the saucepan.

The gas flame must always be in contact with the base of the saucepan.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.

This appliance is labelled in accordance with

European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Tested for you in our cooking studio.

Here you will find a selection of dishes and the ideal settings for them. We will show you which type of heating and which temperature are best suited for your dish. You can find information about suitable accessories and the height at which they should be inserted. There are also tips about cookware and preparation methods.

Notes

The values in the table apply to dishes placed into the cooking compartment when it is cold and empty.

Only preheat the appliance if the table specifies that you should do so. Line the accessories with greaseproof paper before preheating.

The times specified in the tables are guidelines only. They will depend on the quality and composition of the food.

Use the accessories supplied. Additional accessories may be obtained as special accessories from specialist retailers or from the after-sales service.

Before using the appliance, remove all accessories from the cooking compartment that you will not be using.

Always use oven gloves when taking hot accessories or ovenware out of the cooking compartment.

Your oven is suitable for baking on one level.

Caution!

The appliance was manufactured to suit the reference gases specified in the standards. If a gas is used which does not comply with the specified gas mixture and pressure, cooking performance and heat output may not produce the desired result.

Name of the gas

G20

G25

G30

Gas mixture (%)

CH

4

= 100

CH

4

= 86, N

2

= 14 n-C

4

H

10

= 50, i-C

4

H

10

= 50

Cakes and pastries

Cake tins

When you are baking in the cake tin, insert the wire rack at the level indicated and place the cake tin on the wire rack.

Dark-coloured cake tins are the most suitable.

If you use light-coloured baking tins or glass, the baking time increases and the cake is not browned evenly.

Only use heat-resistant glass dishes. Do not place a hot glass dish on a cold or wet surface. The glass could break.

If you want to use silicone moulds, follow the guidelines in the manufacturer's instruction manual. Silicone moulds turn out slightly smaller than normal cake tins. For this reason, the quantities may be slightly different to those indicated in your recipe.

Baking tables for the lower burner in the gas oven

In the tables, you will find the optimum types of heating for a selection of cakes and gateaux. The temperature and cooking times depend on the quantity and consistency of the dough.

The values in the table apply to dishes placed into the cooking compartment when it is cold and empty.

The heat is distributed in the oven as soon as the gas escaping from the lower gas burner is ignited. For this reason, the underside of food is usually more browned than the top.

22

Cake in a mould

Cakes

Cakes

Sponge cake

Apple pie

Semolina cake

Accessories Level

Round springform cake tin with tube sheet, deep

Round springform cake tin with tube sheet, wide

2

3

Springform cake tin (dia. 26 cm) 2

Springform cake tin, light (dia. 20 cm) 2

Glass ovenproof dish, rectangular 3

180

180

230

180

Temperature in

°C

(lower gas burner on the oven)

180

Cooking time in minutes

60-80

60-80

50-60

60-80

60-80

Several small baked items on the baking sheet

Accessories

Small cakes

Biscuits

Sesame seed rings

Puff pastry strudel

Yufka dough strudel

Yeast-risen pastry

Pizza

Baking sheet

Baking sheet

Baking sheet

Baking sheet

Baking sheet

Baking sheet

Baking sheet

Level

3

4

3

4

3

4

4

Temperature in °C

(lower gas burner on the oven)

170

180

190

180

190

170

190

Cooking time in minutes

70-90

40-60

60-80

50-70

60-80

70-90

50-70

Dish Accessories and ovenware

Level Temperature in °C Cooking time in minutes

Pasta bake

Potato gratin made using raw ingredients,

Max. 4 cm deep

Glass ovenproof dish, rectangular*

Glass ovenproof dish, rectangular*

2

2

190

180

60-80

60-80

Vegetable goulash Earthenware pot 2 220 80-100

* Only use heat-resistant glass dishes. Do not place a hot glass dish on a cold or wet surface. The glass could break.

Baking tips

You wish to bake according to your own recipe.

How to tell whether sponge cake is baked through:

Use similar items in the baking tables as a guide.

Approx. 10 minutes before the end of the baking time stated in the recipe, insert a cocktail stick into the cake at its deepest point. If the cocktail stick comes out clean, the cake is ready.

The cake collapses.

The cake has risen in the middle but is lower around the edge.

Next time, add less liquid. Observe the specified mixing times in the recipe.

Do not grease the edge of the springform cake tin. After baking, loosen the cake carefully with a knife.

The cake is too dry.

Make tiny holes in the finished cake using a cocktail stick. Then drizzle fruit juice or an alcoholic drink over it. Next time, reduce the baking time.

The bottom of a fruit cake is too light.

Place the cake one level lower the next time.

The fruit juice overflows.

The pieces of dough are sticking together when the yeast rolls are baked.

Condensation forms when you bake moist cakes.

Next time, use the deeper universal pan (if available).

There must be a distance of about 2 cm between the bread rolls. This gives enough space for the bread rolls to expand and bake evenly on all sides.

Steam can form during baking, which escapes via the door. The steam may settle and form water droplets on the control panel or on the fronts of adjacent units. This is a natural process.

23

Meat, poultry, fish, toast

Table - cooking - gas grill

The values in the table apply to dishes placed in a cold oven.

Turn the pieces of meat after Z of the cooking time.

Always place items in the centre of the wire rack.

If you are grilling directly on the wire rack, you should insert the baking tray at level 1. The fish juices are collected in the pan and the oven is kept cleaner.

Dish Weight Accessories and ovenware

Level Type of heating

Cooking time in minutes

Meat

Steaks, (2 pieces, 3 cm thick)

Hamburgers (6 slices)

Sausages (5 pieces)

Poultry

Chicken drumsticks (4 pieces)

0.5 kg

0.3 kg

0.2 kg

1.5 kg

Fish

Fish, whole (2 pieces)

Fish fillets (4 pieces)

Toast

Toasts, browned (4 slices)

Toasts with filling, browned from above (4 slices)

-

-

1.0 kg

0.5 kg

Wire rack

Wire rack

Wire rack

Wire rack

Wire rack

Wire rack

Wire rack

Wire rack

4

4

4

4

4

4

4

4

(

(

(

(

(

(

(

(

30-40

10-20

10-20

40-50

35-45

35-45

2-4

3-5

Tips for roasting and grilling

The table does not contain information for the weight of the joint.

How to tell when the roast is ready.

Select the next lowest weight from the instructions and extend the time.

Use a meat thermometer (available from specialist shops) or carry out a “spoon test”.

Press down on the roast with a spoon. If it feels firm, it is ready. If the spoon can be pressed in, it needs to be cooked for a little longer.

Check the shelf height and temperature.

The roast is too dark and the crackling is partly burnt.

The roast looks good but the juices are burnt.

Next time, use a smaller roasting dish or add more liquid.

The roast looks good but the juices are too clear and watery.

Next time, use a larger roasting dish and use less liquid.

Steam rises from the roast when basted. This is normal and due to the laws of physics. The majority of the steam escapes through the steam outlet. It may settle and form condensation on the cooler switch panel or on the fronts of adjacent units.

Acrylamide in foodstuffs

Acrylamide is mainly produced in grain and potato products heated at high temperatures, such as potato crisps, chips, toast, rolls, bread, baked goods made from shortcrust pastry

(biscuits, gingerbread, cookies).

Recommendations for baking, roasting and grilling with low acrylamide values

General

Oven chips

Keep cooking times to a minimum.

Cook the food until it is golden brown. "Browned, not charred".

The larger and thicker the food, the less acrylamide it contains.

Where possible, spread out a single layer of oven chips evenly on the baking tray. To prevent the chips from trying out quickly, cook at least 400 g on the baking tray.

24

Robert Bosch Hausgeräte GmbH

Carl-Wery-Straße 34

81739 München

Germany

www.bosch-home.com

*9001198576*

9001198576

01

220396

advertisement

Related manuals

advertisement

Table of contents