Quick Installation Guide
TV-IP512WN
1.31
Table of Contents
English
1. Before You Start
2. Hardware Installation and Configuration
Troubleshooting
1
1
2
8
Version 02.08 .2010
1. Before You Start
Package Contents
System Requirements
Windows 7 (32/64-bits) / Vista(32/64-bits) / XP(32/64-bits) / 2000
1
2. Hardware Installation and Configuration
Note:
1. It is recommended that you configure the IP Camera from a wired computer.
2. If you would like to use IPViewPro 2.0 software, please install the software by clicking the Install IPView Pro 2.0 in the Autorun window and refer to the User's Guide on the
CD for more information.
1.
Insert the Utility CD-ROM into your CD-ROM drive.
2.
Click
Run Setup.exe
(Windows 7/Vista only).
3.
Click
Setup Wizard.
4.
Click
Next
. Then follow the
Setup Wizard
instructions.
2
5.
Click
Next.
6.
Double click on the
SetupWizard
icon on your desktop.
7.
Attach the 2 antennas to the IP camera.
8.
Connect a RJ-45 network cable from a
Switch/Router to the Ethernet port on the IP
Camera.
9.
Connect the AC Power Adapter to the IP
Camera and then to a power outlet.
10.
Click
Next
.
3
11.
Select the IP camera and click
Next
.
12.
Enter your ID and password. Then click
Next
.
By default:
ID:
admin
Password:
admin
13.
If you would like to change the administrator password, click
Change Password
, enter a new password, retype the new password and then click
Next
.
14.
Select
DHCP
and then click
Next
.
15.
Click
I want to use wireless for the camera
and then click
Next
.
4
16.
Select your wireless network from the dropdown list. The correct wireless settings will be automatically configured. If you have
Encryption enabled, please enter your
Encryption
Key
. Then click
Next
.
17.
Configure the
Camera Name
and
Camera Time
. Then click
Next
.
18.
Click
Next
.
19.
Please wait while the settings on your cameras are being saved.
20.
Disconnect the RJ-45 cable and unplug the power. Then plug the power back in. Then verify the Power and Link LEDs are on.
Note
: The TV-IP512WN will not work wirelessly until you disconnect the Ethernet cable from the back of the camera.
5
21.
Click on the following URL or click
Link
to open up the browser configuration.
22.
Right click on the yellow bar and select
Install
ActiveX Control
.
23.
Click
Install
.
24.
Right click on the yellow bar and select
Install
ActiveX Control
.
25.
Click
Run
.
6
26.
Live Video will now appear.
27.
Use the command icons to control the camera.
Your Configuration is complete
For detailed information regarding the
TV-IP512WN
configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or
TRENDnet's website at http://www.trendnet.com.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
7
Troubleshooting
1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not appear automatically. What should I do?
1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box, and type
D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard .
2. For Windows Vista, if the installation menu does not appear automatically, click Start, click the Start
Search box, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to your CD-
ROM Drive, and then press the ENTER key on your keyboard.
3. For Windows XP/2000, if the window does not appear automatically, click Start, click Run and type
D:\autorun.exe where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.
2. Setup Wizard is unable to detect my camera. What should I do?
1. Verify that you have followed all the steps in the Section 2: Hardware Installation and Configuration.
2. Disable any software firewall programs such as ZoneAlarm or Norton Internet Security. If you are using
Windows 7, Vista or XP disable the built in firewall.
3. Click on Rescan in the SetupWizard.
3. I do not have a DHCP server or DHCP is disabled on my network and I am unable to configure the
TV-IP512WN. What should I do?
1. Go to the TCP/IP settings on your computer and assign a static IP address on your computer's network adapter in the subnet of 192.168.10.x. Since the default IP address of the TV-IP512WN is
192.168.10.30, do not assign a static IP address of 192.168.10.30 on your computer's network adapter.
2. Open Internet Explorer and enter http://192.168.10.30 into the address bar.
4. The Image is blurry. How can I adjust the focus on the IP Camera?
You can adjust the IP Camera's focus by rotating the lens.
5. Live video does not appear when I click on Live View. What should I do?
1. Make sure that you are using a browser that supports ActiveX.
2. Make sure that you added ActiveX. See steps 18 to 21 in Section 2:
Hardware Installation and
Configuration
.
6. How do I connect the TV-IP512WN to my wireless router or access point?
Make sure that you configure the camera to have the same SSID, encryption mode and key (if enabled).
Follow the instructions in section 2:
Hardware Installation and Configuration
to configure the camera with the SSID and encryption key.
7. After I successfully configured the TV-IP512WN to match my wireless network settings, I can not connect to the camera.
1. Verify that the wireless settings match your wireless network settings.
2. Connect an Ethernet cable from the IP camera to your router and verify in the wireless section of the browser configuration that the
Enable
option is checked.
3. Make sure to disconnect the Ethernet cable from the camera and verify that the
LNK
LED is blinking orange.
8. I forgot my password.
1. Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds. This will return settings back to factory defaults.
2. Open up the SetupWizard program to find out the IP address of the camera (see step 11 in Section 2:
Configure the IP Camera.
If you do not have a DHCP server on your network, the default IP address is
192.168.10.30.
T
he default administrator ID and password is admin.
If you still encounter problems or have any questions regarding the
TV-IP512WN,
please contact TRENDnet's
Technical Support Department.
8
Copyright ©2010. All Rights Reserved. TRENDnet.
