VHX-37C
Your new VHX-37C kit includes:
Dakota Digital VHX Instrument Installation
For 1937-38 Chevrolet Car
Universal Sender Pack
Installation Manuals VHX Display
Control Box
Switch Assembly
Installation
CAT5 Cable
1. Remove the stock cluster from the dash and be sure to retain all hardware for reassembly.
Manual # 650436A
2. Connect the CAT5 cable to the system as the VHX cluster is installed into the dash.
Watch carefully so you don’t scratch or damage the lens or bezel, and take care when routing the CAT5 cable to the control box location.
3. Re-install the cluster into the vehicle using the stock hardware on the (4) four mounting tabs and refer to the main manual for wiring instructions to complete the VHX installation.
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Manual # 650436A