ENGLISH

Connecting the SW-G2.1 2000 Speakers

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

1. Place the satellite speakers next to the monitor, one on either side.

2. Place the controller within reaching distance.

3. Plug the subwoofer and satellite speaker cables (A, B & C) into the Controller’s subwoofer, left and right speaker output jacks.

4. Before connecting the power cable, make sure the controller’s power knob is in the “off” or “out” position. Plug the AC power cord (D) into a standard household electrical outlet.

5. For TV/DVD/VCD/Home Audio/Game console: (Figure 1)

Insert the 3.5mm stereo plug cable (E) into the 3.5mm socket “ AUX ” on the controller and then connect the red/white RCA plug to the two RCA sockets of

TV/DVD/VCD/Home Audio/Game consoles.

6. For PC/MP3/CD or other stereo devices: (Figure 2)

Insert the RCA plugs (white and red) of the audio cable (E) into the RCA socket (E) on the controller and insert the 3.5mm plug to the audio devices that use a standard 3.5mm socket, such as desktops, notebooks, CD players, MP3 player etc.

7. For Internet phone (Figure 3)

-Plug the 3.5mm plugs of the stereo cables (E/F) to the Mic and AUX jacks on the controller.

-Plug the other side of the stereo cables into the sound card.

-The plugs of the headset can be plugged into the Mic (5) and earphone (4) jacks on the front of the controller.

8. When you finish the connection, turn on the “Power Switch” on the back of the controller and press the “STANDBY” button on the front panel of the controller to start the system.

ENGLISH

Control Function

1. Power: Press to turn speakers on/off .

2. Volume: Controls system volume level

3. Bass: Controls speaker’s bass level

4. HEADPHONE: Accepts a 3.5mm stereo mini-plug from a headphone

5. MIC Jack: Accepts a 3.5mm stereo mini-plug from headset or microphone

6. LINE-IN: Accepts a 3.5mm stereo mini-plug from MP3 or other stereo devices

7. Input source LED indicator: RCA-blue light; back AUX- green light; front

AUX-orange light

8. Standby: Turns power on/off to the speaker system. The input source LED indicator will be off when standby is on and the power is off

9. Source: Select different input source from RCA, front and back AUX

Warning

1. Do not connect the power plug into an AC outlet until all connections are made.

2. Please unplug AC power cord if device goes unused for a long period of time.

3. Do not expose the speakers to any liquids and make sure that no objects filled with liquids, such as vases, etc., are placed near or on the speakers.

4. When the system is in standby mode, the input source LED indicator will be off and the system will NOT work. Press the STANDBY button to start the system and the blue indicator will turn on.