TC Helicon DITTO MIC LOOPER Quick Start Guide

REC / PLAY / OVERDUB

PRESS ONCE

RECORD

PRESS ONCE

PLAY

PRESS ONCE

OVERDUB

UNDO / REDO

PRESS AND

HOLD

UNDO

PRESS AND

HOLD

REDO

LOOP

STOP / CLEAR

PRESS

STOP

PRESS AND

HOLD

CLEAR

LOOP

STOP

Quick Start Guide

TC HELICON DITTO MIC LOOPER

Loop level - Controls the volume of the looped audio.

To switch from the default

Record/Play/Overdub sequence to

Record/Overdub/Play, hold both footswitches while powering on.

Repeat the process to switch back.

Stop - Press to stop loop.

Hold footswitch to erase loop.

USB - Accepts mini-USB cables for firmware updates.

Visit tc-helicon.com to download the full manual

Loop - Press once to record.

Press again to stop recording and begin loop playback. Repeat for additional overdubs. Hold to undo/redo latest overdub.

Out - Connect to a mixer or powered speaker.

Mic - Connect your microphone.

Power - Connect the included

12 V / >= 400 mA power supply.