P 41

41cm 125cc Push

Petrol Rotary Lawn Mower

484343

Instruction Manual

IMPORTANT! Please read these instructions fully before starting assembly.

These instructions contain important information that will help you get the best from your product, ensuring it is assembled correctly and safely. If you need help or have damaged or missing parts, call the Customer Helpline on

01904 727 500

.

2

Contents

General 3

Intended 8

Preparing to operate the lawn mower 14

Disposal 27

Warranty 27

General Safety Warnings

Safety Warnings

WARNING! Read all safety warnings and instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

WARNING! Read all safety warnings and instructions designated by the symbol.

Save all warnings and instructions for future reference.

• Always ensure anyone intending to operate this machine is fully conversant with the contents of this instruction manual prior to assembling, maintaining or operating the machine.

• Perform assembly operations as described in this manual. Failure to observe this warning may lead to serious injury, death, or damage to the machine.

• Always take care when removing the packaging, to prevent damage to you or to the machine.

IMPORTANT!

Before assembling the machine, check all the parts indicated in the manual are in the box. Inspect all the parts for signs of damage. Do not assemble the machine if you observe any damaged components.

NOTE:

This lawn mower complies with the Noise Emission

Directive 2000/14/EC.

3

General safety

• Keep this operating and maintenance manual in a safe place for reference at a later date.

• Read the instructions carefully. Be familiar with the controls and the proper use of the equipment.

• Never allow children or people unfamiliar with these instructions to use the lawn mower. Local regulations can restrict the age of the operator.

• Never mow while people, especially children or pets, are nearby. Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

• This appliance is not intended for use by people

(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

• Never touch a rotating blade.

4

Personal safety

• While mowing, always wear substantial footwear and long trousers.

Do not operate the equipment when barefoot or wearing open-toed sandals.

• Thoroughly inspect the area where the equipment is to be used and remove all objects which can be thrown by the machine.

• Petrol is highly flammable; store fuel in containers specifically designed for this purpose.

a) Refuel outdoors only and do not smoke while refuelling. b) Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while the engine is running, or when the engine is hot. c) If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until petrol vapours have dissipated. d) Replace all fuel tank and container caps securely.

• Replace faulty silencers.

• Prior to use, visually inspect to see that the blade, blade bolts and cutter assembly are not worn or damaged.

Replace worn or damaged blades and bolts in sets, to preserve balance.

Operation safety

• Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.

• Mow only in daylight or in good artificial light.

• Avoid operating the equipment on wet grass, where feasible.

• Always be sure of your footing on slopes.

• Walk, never run.

• Mow across the face of a slope, never up and down.

5

6

• Exercise extreme caution when changing direction on slopes.

• Do not mow excessively steep slopes.

• Use extreme caution when reversing or pulling the lawn mower towards you.

• Stop the blade if the lawn mower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawn mower to and from the area to be mowed.

• Never operate the lawn mower with defective guards, or without safety devices, for example deflectors and/or grass catchers, in place.

• Do not change the engine governor settings or over speed the engine.

• Start the engine carefully according to the instructions and with feet well away from the blade.

• Do not tilt the lawn mower when starting the engine.

• Do not start the engine without the grass collector in place.

• Do not put hands or feet near or under rotating parts.

Keep clear of the discharge opening at all times.

• Never pick up or carry a lawn mower while the engine is running.

• Stop the engine and disconnect the spark plug cable, making sure that all moving parts have come to a complete stop:

a) Before clearing blockages or unclogging the chute. b) Before checking, cleaning or working on the lawn mower. c) After striking a foreign object, inspect the lawn mower for damage and make repairs before restarting and operating the lawn mower. d) If the lawn mower starts to vibrate abnormally, check immediately.

• Stop the engine and disconnect the spark plug wire, and make sure that all moving parts have come to a complete stop before refuelling.

Maintenance and storage

• Keep all nuts, bolts and screws tight, to be sure the equipment is in safe working condition.

• Never store the equipment with petrol in the tank inside a building where fumes can reach an open flame or spark.

• Allow the engine to cool before storing in any enclosure.

• To reduce the fire hazard, keep the engine, silencer, and petrol storage area free of grass, leaves, or excessive grease.

• Check the grass collector frequently for wear or deterioration.

• For safety, always replace worn or damaged parts.

• If the fuel tank has to be drained, this should be done outdoors.

7

8

Intended Use

This mower is designed for domestic lawn mowing only. Use in any other way is considered contrary to the intended use. Compliance with the operation, service and repair, as specified in this handbook, also constitutes essential elements of the intended use.

Warning Symbols

Please read all of the safety and operating instructions carefully before using this machine. Read the instruction manual before operating.

Keep bystanders away - especially children and pets.

Add engine oil.

Only refuel with unleaded petrol.

Hot surfaces will burn the hands!

Warning! The lawn mower’s exhaust gas contains toxic substances. Do not run the engine in closed or poorly-ventilated areas.

The blade continues to rotate for a period after the machine is switched off. Do not touch the blade until all the machine components have stopped completely.

The product complies with the applicable European directives, and an evaluation method of conformity for these directives was done.

96

Sound level data (96 dB), in accordance with Directive 2000/14/EC.

Beware of sharp blades - remove the spark plug lead before maintenance.

No naked flames.

Appropriate ear, eye, and head protection (PPE) must be worn.

9

In The Box

Parts

A. Main mower deck (with upper handle attached)

B. Lower handle

C. Grass collection bag

D. Bolt and star knob with nut M8 x 2

E. Cable clip

F. Handle fixing bolts x 4 (fitted on deck)

Tools

G. Spanner

H. Spark plug wrench

A B C

D E F G H

You will also need:

- SAE 30 or 4-stroke oil - Unleaded fuel - Funnel

If there are any parts missing, please call the customer helpline on 01904 727 500.

10

Assemble The Lawn Mower

WARNING!

Always take care when removing the packaging, to prevent damage to you or to the lawn mower.

This item requires a two-person lift to remove it from the packaging. Make sure that you have sufficient space to put the lawn mower down. Keep your feet apart so that you have a stable position; bend at the knees and keep your back straight.

Always recycle the packaging in accordance with local recycling schemes.

Assemble the lower handle

1. Remove the packaging from the handle. Set the height adjustment to the highest position, and align the lower handle with the holes in the deck. Make sure the holes in the lower handle are aligned with those in the support.

Note:

Ensure the rope guide is on the right side, when you stand behind the mower.

2. Fix the lower handle onto the deck firmly, using the handle fixing bolts and spanner supplied.

11

Assemble the upper handle

1. Lift the upper handle, and lock it in place using the handle tension knobs and tensioning bolts. Ensure the lower and upper handles are firmly connected.

2. Raise the safety fl ap, and hook the collection bag onto the mower. Release the safety fl ap.

2. Ensure the rope guide is on the right side, when you stand behind the mower. Engage the brake lever, and pull the start cord to hang it on the rope guide.

Assemble the grass bag

IMPORTANT!

Make sure the grass collection bag is in place before starting the engine.

1. Attach the grass bag to the frame by fixing all the plastic hooks.

Attach cable clips

Ensure that the cable clips supplied are used to fix the cable to the lower handle.

STOP!

Do not start the engine before putting 500ml of SAE 30 oil into the engine.

Failure to do so will result in irreparable damage to the engine and invalidate your warranty.

12 13

Preparing to operate the lawn mower

Filling with engine oil

IMPORTANT!

The following procedures and adjustments must be performed before the engine is started. Do not attempt to make any of these adjustments while the engine is running.

This engine is shipped without oil or petrol, any oil residue is from testing prior to shipping.

The engine must be filled with the correct grade of oil and petrol before starting the engine.

Running the engine with a low oil level will cause irreparable engine damage.

Always use high-quality detergent oil classified SAE 30 oil (or equivalent, e.g. 5W 30, often termed as 4-stroke lawn mower oil). Only use additives recommended by the engine manufacturer. To prolong the life of your engine, it is important that the oil is changed after the first 5 hours of use.

Filling with engine fuel

WARNING!

Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow fl ames or sparks in the area where the engine is refueled or where petrol is stored. Avoid repeated or prolonged contact with skin or inhalation of vapour.

CAUTION!

Petrol is highly fl ammable and extreme caution must be taken when handling or working with it. Keep out of reach of children.

1. Clean the area around the petrol filler cap before removing the cap. Check the fuel level.

2. Refill the tank if the fuel level is low.

3. Always use clean, fresh unleaded petrol and purchase fuel in quantities that can be used within 30 days.

Check the engine oil level with the engine stopped and the mower on a level surface.

1. Remove the oil filler dipstick and wipe oil from it with a clean cloth.

2. Insert the dipstick into the oil filler neck, and screw it in.

3. Then remove the dipstick and check the oil level. The oil level must be between the

Min. and Max. marks on the dipstick. If near the lower level, fill to the upper level with the recommended oil (SAE 30 or equivalent). Do not overfill. Wipe away any spilt oil.

min max

4. Before using for the first time, add 0.5 litres of oil (SAE 30).

14

Never mix oil with petrol.

To allow for expansion, carefully refuel and avoid overfilling or spillage. There should be no fuel in the filler neck.

Clean up any overflow or splashes of petrol before starting the engine.

Tighten the filler cap after filling, finger tight only.

NOTE:

The 41cm hand push lawn mower has a maximum fuel capacity of 800ml.

15

16

Operation

Setting the cutting height

WARNING!

The blade can cause serious injury. Before adjusting the mower height, stop the engine and wait for the mower blade to come to a complete stop.

1. Pull the lever towards the wheel, then move it forward or backward to adjust the cutting height.

2. Move it to any one of the 5 positions for the desired cutting height.

3. Return the lever into the securing plate.

Starting the engine

WARNING!

Do not operate the machine in enclosed or poorly-ventilated areas, as the exhaust gas contains toxic substances. Keep hands, feet, hair and clothing away from all the moving parts of the machine. The exhaust and other parts of the machine will become hot during use. Make sure that the blade is securely fastened before starting the engine.

Step 1 - Starting procedure: quick guide

PRIMER BULB

3~5 TIMES

1

STOP/START-

LEVER CLOSED

2

PULL STARTING

HANDLE

3

1

2

3

4

5

Position

1

2

Approx. cutting height (mm)

25mm

30mm

45mm

60mm

75mm

NOTE:

Never use the lowest cutting height for the first cut of the season or in drought conditions. Only about one third of the grass height should be cut at this time.

To start the engine, make sure that the spark plug cap is located on the plug and the machine is filled with sufficient oil and petrol.

Step 2 - Starting the engine

1.

When starting a cold engine, press down the primer fully 3-5 times.

Pressing the primer button too many times could cause the engine to flood.

A

NOTE:

When starting a warm engine, the primer does not need to be used. If the engine stops due to a lack of petrol, refill and press down the primer 3-5 times.

17

2. Start/stop bar activation

Pull the start/stop bar towards you.

Engine start

Engine stop

3. Pull cord handle

With the right hand, slowly but firmly pull the starter handle and rope from the pull cord guide until you feel resistance, then pull briskly. If the engine fails to start after three pulls, repeat the start process. When the engine starts, return the starter rope to the pull cord guide gently.

To stop, release stop/start bar

Failure to start

If the engine won’t start after you have operated the starter several times, the engine may be fl ooded with excess fuel.

Use the following procedure to clean and start a fl ooded engine:

A. Release the stop/start bar.

B. Remove the spark plug, dry it, and then reinstall it.

Install the spark plug carefully by hand, to avoid cross-threading. After the plug is seated, tighten it 1/8 to 1/4 turns with the socket spanner to compress the washer.

C. Pull the stop/start bar towards the upper handle.

D. Operate the starter, as described above.

Mowing

WARNING!

Always observe the strictest safety procedures when using the lawnmower.

Start the engine and allow it to run. See ‘Step 2 - Starting the engine’.

Keep a firm grip on the upper handle and stop/start bar and push the lawnmower forward.

Walk along with it, never run with the mower. Be very careful when mowing uneven or rough ground. Maintain a stable footing.

Mow across slopes, never up and down. Be careful when changing the direction of the mower on a slope. Do not use the mower on a steep slope of more than 15°.

NOTE:

The best result will be achieved if the grass is dry. Wet grass will tend to clog the blade and the grass collection system.

Grass grows at different rates at different times of the year. Never use the lowest cutting height for the first cut of the season or in drought conditions. Only about one third of the grass height should be cut.

If the lawnmower will not collect the cuttings efficiently, the grass discharge chute may be blocked, the grass bag may be full, or the underside of the mower deck may be clogged.

Emptying the grass bag

Raise the discharge flap with one hand and remove the grass bag using its handle with your other hand. To maintain safety, the discharge flap will close back to cover the mulching plug when you release the flap.

Empty the grass debris in the grass collection bag and refit the bag. If any grass residues are caught in the discharge chute, clean it using a nylon-bristled brush.

18 19

Maintenance and Storage

Storing the lawn mower for short periods

After mowing, please follow the actions below prior to placing the lawn mower in storage:

- Allow the engine to fully cool.

- Ensure the grass bag is empty.

- Clean all debris from under the mower deck.

Store the lawn mower on a flat and level surface, with all 4 wheels on the ground.

Store in a dry, safe place which is not accessible by children or people who are not familiar with operation.

Storing the lawn mower for extended periods

CAUTION!

Do not empty the petrol tank in enclosed areas, near fire or when smoking. Petrol fumes can cause explosions and fire. Always carry the product on its gripping surfaces.

If the lawn mower is to be placed into storage at the end of the season, or if the mower is not to be used for a longer period than 6 weeks, storage maintenance must be performed on the lawn mower.

Temperature fluctuations cause condensation, which contaminates fuel and causes starting problems. Simply emptying the machine of fuel will prevent this.

Empty the petrol tank with a petrol suction pump, if available, or use the tipping method.

Start the engine and let it run until any remaining petrol has been used up.

Change the oil at the end of every season. To do so, remove the used engine oil from a warm engine and refill with fresh oil.

Remove the spark plug from the cylinder head. Fill the cylinder with approx. 20ml of oil from an oil can. Slowly pull back the starter handle, which will bathe the cylinder wall with oil, and screw the spark plug back in.

Clean the cooling fins of the cylinder and the housing.

Be sure to clean the entire machine to protect the paint.

Store the machine in a well-ventilated place.

NOTE:

Alternatively, adding Briggs & Stratton FUEL FIT to the fuel will prevent contaminated fuel. Not all additives on the market do this. FUEL FIT can be ordered via www.gardenservicecentre.co.uk.

20

Preparation to re-use

Check the oil level before starting the engine to ensure there is sufficient oil, see page 14.

Check the spark plug is inserted correctly, see page 22.

Fill engine with fresh unleaded fuel, see page 15.

Follow starting procedure, see page 16.

Maintenance schedule

WARNING!

Before you tip the lawn mower onto its side, completely empty the fuel tank using a petrol suction pump.

Never turn the mower upside down.

Before commencing any maintenance, always disconnect the spark plug.

Performing routine maintenance correctly on your lawn mower will ensure you get years of trouble-free use.

Please keep this manual safe for future reference.

It is recommended that the following maintenance schedule is adhered to. This will ensure the lawn mower operates correctly and is safe to use.

Cleaning

Air filter

Spark plug

Engine oil

Cutting blade

After every use After 12 hours use clean check check clean clean check check check

After 24 hours use clean clean check check check

NOTE: The engine oil should be changed after the first 5 hours.

After 36 hours use clean replace replace check replace

Cleaning

• To ensure long life and good performance of the machine, it’s important to keep the machine clean and well lubricated. Make sure the chute is clean and under the deck is cleared from wet debris. (See also short term storage).

• Do not allow grass cuttings and other debris to become dry and hard on any of the mower surfaces, as this will directly affect the cutting and grass collection performance.

Make sure that the underside of the lawn mower deck is clean and clear.

• Never clean the lawn mower with a water jet or high-pressure cleaner. The engine must remain dry. Do not use aggressive cleaning agents or solvents, such as cold degreasers or petroleum ether.

21

Cleaning or replacing the air filter

WARNING!

Never run the engine without the air filter element installed:

1. Loosen the fastener that holds the cover.

2. Open the cover and remove the filter.

3. To loosen debris, gently tap the filter on a hard surface. If the filter is excessively dirty, replace with a new filter.

4. Install the filter.

5. Install the cover tabs into the slots.

6. Close the cover and secure with the fastener.

Cleaning or replacing the spark plug

1. Once the engine has cooled, pull off the spark plug boot with a twist. Remove the spark plug using the socket spanner supplied.

2. Clean the plug with a wire brush.

3. Using a feeler gauge, set the gap to 0.51mm.

4. Install the spark plug carefully by hand to avoid cross-threading.

5. After the spark plug is seated, tighten with the spanner to compress the washer.

0.43-0.51mm

Changing the oil

Tilt the lawn mower towards the oil filler, have a container ready to catch the oil, and remove the dipstick. Once the oil has been emptied, wipe clean any spillages.

Refill with 500ml SAE 30 oil or equivalent, i.e. SAE 5W/30, SAE 10W/30). When the dipstick is rested on the filler pipe, the oil level must be between the min. and max. marks on the dipstick.

See ‘Filling with engine oil’. Do not overfill.

Start the engine and allow it to run brie fl y.

Stop the engine, wait one minute and check the oil level. Top up if necessary.

Replacing the cutting blade

WARNING! USE GLOVES.

Before you remove the grass collection bag, stop the engine and wait until the blade stops completely.

You will need garden gloves (not provided) and a spanner wrench to remove the blade.

Always handle the blade with care - sharp edges could cause injury.

Don’t hold the blade directly by hand.

Renew your metal blade after 50 hours of mowing or after 2 years, whichever is sooner, regardless of condition.

Regularly check your blade. If the cut of your grass is poor, the blade might be blunt.

Damaged blades not only result in a bad cut, they cause excessive vibration and uneconomical running of the engine. If the blade has worn excessively and become pitted and blunt, it should be replaced or sharpened.

NOTE:

The blade carrier is designed to break under heavy blade impact to protect the machine. If this happens, also replace the blade carrier. This can be purchased from www.gardenservicecentre.co.uk.

22 23

Tip the machine slightly towards the oil filler pipe and reach under the deck.

Hold the blade and unscrew the blade bolt counterclockwise using a spanner wrench.

Remove the washer and the blade.

Inspect the blade adaptor for any signs of damage.

Fit a new blade, locate the blade on the two studs on the blade fl ange and then replace the washer and bolts.

Check the washer is still slightly domed to keep the pressure on the bolt to stop it unwinding, keeping the blade firmly secure. Then replace the washer (right way around!) and bolts.

Make sure the blade is correctly located, and then firmly tighten the bolt. Do not over tighten. The up turn of the blade must project into the motor compartment.

NOTE:

If you are unsure about performing this operation, call our helpline or go to an authorised dealer to change the blade for you.

List of consumable parts:

QC12YC

933918

933206

Spark plug

Collection grass bag

Blade

932217

466018

Blade bolt

Fixing knob

Parts can be ordered via www.gardenservicecentre.co.uk.

Troubleshooting

WARNING!

Always switch off the engine and pull the ignition cable before starting any inspection or adjustment work.

If after making an adjustment or repair to the engine you let it run for a few minutes, remember that the exhaust and other parts will get hot.

The following table provides solutions to common problems encountered with the lawn mower:

Fault

Loud while running, machine vibrates heavily

Engine does not start

Possible cause

- Screws are loose

- Blade fasteners are loose

- Blade is unbalanced

- Start/stop bar not pressed

- Primer bulb is empty

- Spark plug is defective

- Fuel tank is empty

- Engine may be flooded

Engine runs unsteadily

Uneven mowing results

Unsatisfactory grass collection

- Air filter is soiled

- Spark plug is soiled

- Blade is blunt

- Cutting height is too low

- Cutting height is too low

- Blade is worn

- Grass bag is clogged

Solution

- Check screws

- Check blade fasteners

- Replace blade

- Press start/stop bar

- Press primer bulb 3-5 times

- Replace spark plug

- Refill with fuel

- Remove plug and dry, see page

22

- Clean the air filter

- Clean the spark plug

- Sharpen the blade

- Set correct height

- Set correct height

- Replace the blade

- Clear any clogged grass debris

24 25

Technical Data

Property

Engine type

Engine displacement

Engine power

Max. engine speed

Cutting width

Grass bag capacity

Ignition

Fuel tank capacity

Oil tank capacity

Measured sound power level

Guaranteed sound power level

Vibration

Spark type

Net weight

26

Value

Single cylinder 4-stroke

125cm

3

1.8kW/ 3000/min

3000/min

41cm

45L

T.C.I

0.8L

0.5L

95 dB(A)

96 dB(A) K=3dB(A)

5m/s

2

k=1.5m/s

2

QC12YC

21kg

Disposal

The lawn mower and its accessories are made of various recyclable materials. Dispose of the lawn mower in accordance with your local recycling regulations.

Getting Help

Our dedicated UK-based customer helpline is open 7 days a week to assist you with assembly, parts queries and technical support. We are open during office hours but you can always send an email via

[email protected]

. Our experts are here to get you back enjoying your garden in no time.

For useful assembly, starting and maintenance videos, and for ordering spares, please visit

www.gardenservicecentre.co.uk.

Calling our service does not affect your statutory rights.

Warranty

Any claim under this warranty must be made within 2 years of the date of purchase. To make a claim under the warranty, take the product (with proof of purchase) to your local store.

HHGL Limited bears reasonable, direct expenses of claiming under the warranty.

You may submit details and proof to our store for consideration. The warranty covers manufacturer defects in materials, workmanship and finish under normal use.

This warranty is provided in addition to other rights and remedies you may have under law: our goods come with guarantees, which cannot be excluded under the UK Consumer

Rights Act 2015.

You are entitled to a replacement or refund for a major failure, and to compensation for other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

The warranty excludes damage resulting from product misuse or product neglect. The warranty covers domestic use only and does not apply to commercial applications.

This warranty is given by HHGL Limited, Witan Gate House, 500-600 Witan Gate,

Milton Keynes, MK9 1BA.

27