Owner’s Manual & Safety Instructions

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

20d

For Best Results Use

3.0 Amp Hour Battery

(Sold Separately)

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.

Copyright

©

2019 by Harbor Freight Tools

®

. All rights reserved.

No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

table of contents

Safety ........................................................................2

Specifications ............................................................7

Setup .........................................................................7

Operation ...................................................................9

Maintenance .............................................................10

Parts List and Diagram .............................................11

Warranty ...................................................................12

WARninG SyMBOLS AnD DEFinitiOnS

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

Addresses practices not related to personal injury.

iMpORtAnt SAFEty inFORMAtiOn

General power tool Safety Warnings

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term ″power tool″ in the warnings refers to your battery-operated (cordless) power tool.

Work Area Safety

1.

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

2.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

3.

Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

Electrical Safety

Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of electric shock.

Page 2

For technical questions, please call 1-888-866-5797.

Item 56895

personal Safety

1.

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious personal injury.

2.

Use personal protective equipment.

Always wear eye protection.

Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

3.

prevent unintentional starting.

Ensure the trigger is in the off-position before connecting to power source, picking up or carrying the tool.

Carrying power tools with your finger on the Trigger or energizing power tools that have the Trigger on invites accidents.

power tool Use and care

4.

Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

5.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.

Loose clothes, jewelry or long hair can be caught in moving parts.

6.

if devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

7.

Only use safety equipment that has been approved by an appropriate standards agency.

Unapproved safety equipment may not provide adequate protection. Eye protection must be

ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area.

1.

Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was designed.

2.

Do not use the power tool if the trigger does not turn it on and off.

Any power tool that cannot be controlled with the

Trigger is dangerous and must be repaired.

3.

Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

4.

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

Battery tool Use and care

1.

Recharge only with the charger specified by the manufacturer.

A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

2.

Use power tools only with specifically designated battery packs.

Use of any other battery packs may create a risk of injury and fire.

5.

Maintain power tools. check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. if damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

6.

Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

7.

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

Use of the power tool for operations different from those intended could result in a hazardous situation.

3.

When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a fire.

4.

Under abusive conditions, liquid may be ejected from the battery; avoid contact. if contact accidentally occurs, flush with water. if liquid contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or burns.

Item 56895

For technical questions, please call 1-888-866-5797.

Page 3

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the power tool is maintained.

Hedge trimmer Safety

1.

Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving.

Make sure the switch is off when clearing jammed material. Blades coast after turn off.

A moment of inattention while operating the hedge trimmer may result in serious personal injury.

2.

carry the hedge trimmer by the handle with the cutter blade stopped.

Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades

.

3.

Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring or its own cord.

Cutter blades contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

4.

DAnGER – Keep hands away from blade.

Contact with blade will result in serious personal injury.

5.

Use both hands when operating the hedge trimmer. Using one hand could cause loss of control and result in serious personal injury.

6. Do not expose to rain.

7. Dress Properly. Do not wear loose clothing or jewelry. They can be caught in moving parts.

Use of rubber gloves and substantial footwear is recommended when working outdoors.

Wear protective hair covering to contain long hair.

8. Wear ANSI-approved safety goggles and heavy-duty work gloves. Use face or dust mask if operation is dusty.

9. Do not leave the tool unattended when the

Battery Pack is connected. Turn off the tool, and remove the Battery Pack before leaving.

10. Carefully inspect the Blade Assembly before inserting the Battery Pack. Do not use Trimmer if any part of the Blade

Assembly is bent, dull, or damaged.

11. The Trigger and Safety Switch are important safety devices. Do not disable or tie down either Trigger or Safety Switch.

12. Do not use in rain, snow, sprinklers, or wet grass.

Do not rinse off the Trimmer.

13. Use only during daylight hours.

14. Do not cut toward your body or face.

15. The Blade will continue to move for a few seconds after use. Allow it to stop completely and remove the Battery Pack before putting the tool down, making any adjustments, or servicing the tool.

16. Cover the Blade Assembly with the

Blade Cover after every use.

17. Do not overreach. Keep proper footing and balance at all times.

18. Stay Alert. Watch what you are doing. Use common sense. Do not operate tool when you are tired.

19. Avoid unintentional starting.

Prepare to begin work before turning on the tool.

20. The battery Charger gets hot during use. The Charger’s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment.

Do not place the Charger on a flammable surface.

Do not obstruct any vents on the Charger.

Especially avoid placing the charger on carpets and rugs; they are not only flammable, but they also obstruct vents under the charger.

Place the Charger on a stable, solid, nonflammable surface (such as a stable metal workbench or concrete floor) at least 1 foot away from all flammable objects, such as drapes or walls. Keep a fire extinguisher and a smoke detector in the area. Frequently monitor the

Charger and Battery Pack while charging.

21. This product is not a toy.

Keep it out of reach of children.

22. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.

Page 4

For technical questions, please call 1-888-866-5797.

Item 56895

23. Maintain labels and nameplates on the tool.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

24. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Lithium Battery Safety Warnings

LitHiUM BAttERiES StORE

A LARGE AMOUnt OF EnERGy AnD

WiLL VEnt FiRE OR EXpLODE iF MiStREAtED:

1. Keep Battery

Pack dry.

2.

DO nOt DO Any OF tHE FOLLOWinG tO tHE BAttERy pAcK:

a.

Open,

b.

Drop,

c.

Short-circuit,

d.

puncture,

e.

incinerate, or

f.

Expose to temperatures greater than 265°F.

3. Charge Battery Pack only according to its Charger’s instructions.

4. Inspect Battery Pack before every use; do not use or charge if damaged.

Battery charger Safety

1. SAVE THESE INSTRUCTIONS – This manual contains important Battery Charger safety and operating instructions.

2. Before using Battery Charger, read all instructions and cautionary markings on Battery

Charger, Battery, and product using Battery.

3. CAUTION - To reduce risk of injury, charge only li-ion Bauer-type rechargeable batteries. Other types of batteries may burst causing personal injury and damage.

4. Do not charge or use tool in rain, or in wet locations.

5. Do not use battery-operated tool in rain.

6. Remove or disconnect battery after use, before servicing, cleaning or removing material from the tool.

7. Do not dispose of battery in a fire. The cell may explode. Check with local codes for possible disposal instructions.

8. Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

9. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

Item 56895

For technical questions, please call 1-888-866-5797.

Page 5

Vibration Hazard

This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:

1. Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any symptoms related to vibration

(such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible.

2. Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury.

3. Wear suitable gloves to reduce the vibration effects on the user.

4. Use appliances with the lowest vibration when there is a choice between different processes.

5. Include vibration-free periods each day of work.

6. Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.

7. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately.

SAVE tHESE inStRUctiOnS.

Grounding

tO pREVEnt ELEctRic SHOcK AnD DEAtH FROM incORREct GROUnDinG: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the charger. Do not use the charger if the power cord or plug is damaged. if damaged, have it repaired by a service facility before use. if the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

Extension cords

note:

Extension cords must not be used with this item’s Charger.

Symbology

Double Insulated

V

Volts

~

Alternating Current

A

Amperes

n0 xxxx/min.

No Load Revolutions per Minute (RPM)

WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved safety goggles with side shields.

Read the manual before set-up and/or use.

WARNING marking concerning Risk of Fire.

Do not cover Charger ventilation ducts.

Charge on fireproof surface only.

WARNING marking concerning

Risk of Electric Shock.

Properly connect Charger’s power cord to appropriate outlet.

WARNING marking concerning

Risk of Explosion.

Do not puncture, short, or open battery packs and do not charge damaged battery packs.

Page 6

For technical questions, please call 1-888-866-5797.

Item 56895

Specifications

Battery Type

Charger Type

No Load Speed

Shrubber Blade

Shearing Blade

20V Bauer Hypermax Li-Ion: 63631, 64816

20V Bauer Hypermax: 63529, 63947

1160 SPM

Blade Length: 8"

Branch Capacity: 5/16" diameter

4" Cutting Width

Set Up instructions

Read the EntiRE iMpORtAnt SAFEty inStRUctiOnS section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

tO pREVEnt SERiOUS inJURy FROM AcciDEntAL OpERAtiOn: Make sure that the trigger is in the off-position and remove the Battery pack before performing any procedure in this section.

note:

For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Functions

Handle trigger Lockout Switch

Shrubber Blade

Shearing Blade

Lock Button trigger

Battery pack

(not included) trigger and Safety Switch:

To increase safety, these have to be used together to activate the Shear/Shrubber. Keep both hands on the Handle at all times during operation. The Blade will coast to a stop after the Trigger is released.

Item 56895

For technical questions, please call 1-888-866-5797.

Page 7

installing Blades

1. Make sure that the Trigger is in the off-position and remove the Battery Pack.

2. Press in the Lock Buttons on the Blade Assembly.

4. Release the Lock Buttons to secure the Blade on the tool.

3. Fit the Blade Assembly onto the

Shear/Shrubber as shown.

5. To remove the Blade Assembly press in the

Lock Buttons and lift the Blade off of the tool.

note:

The tool’s drive mechanism is exposed when no Blade is installed. Make sure no dirt or debris gets into the drive when changing Blades.

Page 8

For technical questions, please call 1-888-866-5797.

Item 56895

Operating instructions

Read the EntiRE iMpORtAnt SAFEty inFORMAtiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

charging Battery pack

Charge Battery Pack according to the instructions included with the

20V Bauer Battery charger (both sold separately).

General Operating instructions

1. Before operating the Shear/Shrubber, put on ANSIapproved safety goggles and other safety gear.

Safety goggles and other safety gear are sold separately.

2. Install the appropriate Blade Assembly for the work to be performed. The Shearing

Blade is suitable for trimming grass and light weeds. The Shrubber Blade is suitable for trimming small hedges and bushes.

3. Remove all decorations, lighting fixtures, and cords from the area to be cut.

4. Make sure that the Trigger is in the off-position, then slide the Battery Pack into slot on back of Shear/Shrubber until it clicks into place.

5. When the area is clear, push the Trigger Lockout

Switch forward and then squeeze and hold the

Trigger. With the Shear/Shrubber running, you may release pressure on the Lockout Switch.

Releasing the Trigger will stop the motor.

nOtE:

The Trigger cannot be activated unless the Trigger Lockout Switch is pushed forward.

WARninG! tO pREVEnt SERiOUS inJURy:

Maintain a firm grip on Handle with both hands at all times during operation.

nOticE:

Be careful to avoid contacting any chain-link or wire fence — they may damage the Blade.

6. For grass trimming operation: a. Use the Shearing Blade.

b. Trim when grass is dry for best results.

c. Do not force the tool through heavy grass which can bind the Blade. Cut gradually, using multiple passes.

7. For hedge trimming operation: a. Use the Shrubber Blade.

b. Mark off the hedge to be trimmed using stakes and marking string (sold separately).

c. Search for all branches thicker than

5/16" diameter and cut to length using a lopper (sold separately).

d. Take off layers of plant material gradually, using multiple passes. This will help avoid damaging the hedge, and will help prevent accidentally cutting thick branches or other objects hidden within the hedge.

8. Release the Trigger to stop the motor.

The Blade will continue to move for a few seconds after turnoff.

WARninG! tO pREVEnt SERiOUS inJURy:

Wait for the Blade to stop completely before putting down the Shear/Shrubber. the Blade will briefly keep moving, even after the trigger has been released.

9. If the Shrubber Blade gets stuck on a branch: a. Remove the Battery Pack.

b. Remove the Blade from the branch.

c. Cut the branch to the desired length using a lopper (sold separately).

10. To prevent accidents, release the Trigger to turn off the Shear/Shrubber and remove its

Battery Pack after use. Clean and lubricate the Blades using a light machine oil, cover the Blades with the Sheath or Scabbard, then store the tool indoors out of children’s reach.

Item 56895

For technical questions, please call 1-888-866-5797.

Page 9

Maintenance and Servicing

procedures not specifically explained in this manual must be performed only by a qualified technician.

tO pREVEnt SERiOUS inJURy FROM AcciDEntAL OpERAtiOn:

Make sure that the trigger is in the off-position and remove the Battery pack before performing any procedure in this section.

tO pREVEnt SERiOUS inJURy FROM tOOL FAiLURE:

Do not use damaged equipment. if abnormal noise or vibration occurs, have the problem corrected before further use.

cleaning, Maintenance, and Lubrication

1.

BEFORE EAcH USE,

inspect the general condition of the tool. Check for:

• leaking, swollen, or cracked battery pack

• loose hardware

• misalignment or binding of moving parts, especially Blade assembly

• cracked or broken parts

• any other condition that may affect its safe operation.

2.

AFtER USE,

clean external surfaces of the tool with a clean, moist cloth. Clean and lubricate the Blades using a light machine oil. Cover the Blades with the Sheath or Scabbard.

3. Li-Ion BATTERY MUST BE RECYCLED OR

DISPOSED OF PROPERLY.

Do not short, incinerate or open battery.

4. Blade nicks that interfere with normal Blade movement can be removed after removing the

Battery Pack using a file (sold separately).

5. Disconnect Battery Pack and store Battery

Pack, Charger, and tool in dry, indoor area out of reach of children and away from metal objects

(i.e., paperclips, coins) to prevent shorting.

6. Do not store near fertilizer or other gardening chemicals. They may accelerate corrosion, making the tool unsafe.

pLEASE READ tHE FOLLOWinG cAREFULLy

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Record product’s Serial number Here: note:

If product has no serial number, record month and year of purchase instead.

note:

Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.

Page 10

For technical questions, please call 1-888-866-5797.

Item 56895

parts List and Diagram part

1

2

5

6

3

4

7

Description

Left Housing

Trigger Lockout Switch

Spring

Microswitch

Torsion Spring

Trigger

Gearbox Assembly

Qty

1

1

1

1

1

1

1

part

8

9

Description

Shearing Blade Assembly w/Sheath

Shrubber Blade Assembly w/Scabbard

10 Dust-Proof Mat

11 Right Housing

12 Self Tapping Screw (3.5 x 14)

13 Self Tapping Screw (3.5 x 12)

14 PCB

Qty

1

1

1

1

10

2

1

Item 56895

For technical questions, please call 1-888-866-5797.

Page 11

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

26541 Agoura Road • calabasas, cA 91302 • 1-888-866-5797