EXPERIENCE™ SERIES 800 LINE TREADMILL
GETTING STARTED GUIDE
Welcome to a personalized fitness experience for your members
The Experience™ Series cardio line gives operators the proven, reliable performance they count on. Each piece delivers the personalized exercise experience and entertainment choices your members seek. For the 800 Line treadmills, Integrated Footplant Technology (IFT) and Ground Effects® provide maximum stability for high-impact motion.
Get to know Precor equipment
To make sure your equipment withstands the test of time and consistent usage, it’s important to know if it’s working well. The Active Status Light is located at the front edge of the treadmill hood and gives you this information at-a-glance.
During normal operation, the status light is a steady blue. It changes color and pattern if the treadmill detects a mechanical or electrical problem.
Status Light Color Meanings
Steady (solid) blue Treadmill operating normally
Pulsing blue
Steady (solid) yellow
Treadmill belt needs replacement (except for
230 V models).
Treadmill has detected and recovered from an error.
Safe to use, but some functions may be unavailable.
Action Required
None
Perform maintenance then, reset status light.
Refer to console’s event log for more information.
Get to know Precor cardio workouts
Our instructional videos empower exercisers, trainers, and operators with essential information for safe and effective equipment use.
Once trainers understand the cardio workouts available on Precor equipment, they can recommend either manual or preset workouts that match up with a member’s training program or fitness goals, including weight loss, toning, and performance workouts.
For complete console operating instructions and troubleshooting, visit us at www.precor.com
.
Make sure your trainers regularly read our blog (select languages) at www.precor.com
for more ideas about fitness routines and advice from trusted industry experts.
TRM Getting Started Guide | P/N 304296-101 rev A, ENU
©Precor Incorporated | September 2016
CAUTION
TRAINING AND EXERCISING
Before beginning any fitness program, see your physician for a thorough physical exam. Seek advice from your physician to learn the target heart rate appropriate for your fitness level.
Read all safety and operating instructions included with your equipment. For more information, visit us at www.precor.com
and look for your equipment model number.
Start a workout
Step 1: Make sure your fully assembled treadmill is on by checking that the blue light is on at the bottom front.
Step 2: Straddle the belt by placing your feet on either side of the belt. Attach the safety clip securely to your clothing
Step 3: Press QuickStart (on screen for touchscreen consoles), or choose a preset workout, then press OK to begin.
Step 4: After the console has displayed its countdown and the belt has started moving, step onto the belt.
Step 5: Use the motion controls to adjust the incline angle of the treadmill and the speed of the belt.
Step 6: To end your workout early, press Pause on the console or press the Stop switch.
Step 7: To dismount safely, place feet on the rails until the belt comes to a complete stop and then step off the treadmill.
Check out our trend-based workouts and Precor product tutorials at www.precor.com/education .
