SEDONA BY LYNX TM SERIES

42" SEDONA BUILT-IN GRILL

WITH 3 STAINLESS STEEL BURNERS (L700)

OPEN VIEW

L700 PRODUCT OVERVIEW

■

Variable power—three Stainless Steel Burners combining to provide up to 69,000 BTU

■

Consistent assurance—direct spark ignition with battery backup

■

Perfect clarity—dual halogen grill surface lights

■

Quick visibility—temperature gauge

■

Easy opening—Lynx Hood Assist

■

Steadfast durability—heavy-duty welded construction eliminates gaps where grease can collect

■

Generous capacity—1,049 square inches of cooking surface (728 primary, 321 secondary)

■

Beautiful illumination—blue-lit control knobs

■

Steady performance—heat-stabilizing design

■

Smooth opening—fluid rotation handle

■

Premier platform—stainless steel grilling grates

FOR A COMPLIMENTARY CUSTOM DESIGN FOR YOUR OUTDOOR KITCHEN, VISIT LYNXGRILLS.COM/DESIGN-CENTER

42" SEDONA BUILT-IN GRILL

WITH 3 STAINLESS STEEL BURNERS (L700)

L700 PRODUCT FEATURES

The Sedona by Lynx TM Series is always evolving to be the best at something new. That philosophy is reflected in its features.

We’ve refined these features to give you a grilling experience that’s both simple and stunning.

STAINLESS STEEL BURNERS

LYNX HOOD ASSIST

SPARK IGNITION SYSTEM

CERAMIC RADIANT BRIQUETTES

SEAMLESS WELDED CONSTRUCTION INTEGRATED ILLUMINATION

FOR MORE

INFORMATION ON

SEDONA BY LYNX TM SERIES

PRODUCT FEATURES,

PLEASE VISIT

LYNXGRILLS.COM

EXPANSIVE GRILLING SURFACE

L700 ISLAND PREPARATION

3” min.

36 3/8 min.

”

41”

2 1/4 ”

3 1/2 ”

Grill*

2”

21 1/4 ”

10

* 2" round hole must be located at rear of grill cutout. 120V GFI outlet must be located within 6' of the

2" hole.

Access

Doors

19”

33 3/4 ”

CUT-OUT DIMENSIONS: WIDTH: 41" / HEIGHT: 10" / DEPTH: 21.25"

COUNTERTOP NOTCH DETAIL INSULATING JACKET

SHIPPING DIMENSIONS: WIDTH 34" / HEIGHT 47" / DEPTH 30"

SHIPPING WEIGHT: 240 POUNDS

GAS REQUIREMENTS: SHIPS IN LIQUID PROPANE OR NATURAL GAS

FROM FACTORY

48”

5”

23 1/4 ”

4 1/2 ”

Insulated

Jacket

3”

11 5/8 ”

ELECTRICAL REQUIREMENTS: INSTALLATION REQUIRES AN OUTDOOR

120V/15GFI ELECTRICAL OUTLET ADJACENT TO PRODUCT

COOKING CONFIGURATION: BUILT-IN GRILL WITH ROTISSERIE, 1 PROSEAR

INFRARED BURNER AND 2 STAINLESS STEEL BURNERS

Note: Insulating jacket required for all grills installed into a combustible enclosure. For natural gas grills,

Lynx recommends using ¾" gas lines. Side burners may be rotated 90 degrees. See installation manuals for details.

FOR EVEN MORE ON THIS PRODUCT AND OTHER COMPLIMENTARY LYNX PRODUCTS, VIST LYNXGRILLS.COM