Steering Wheel Control(SWC) Operation
In Home screen, press SW C icon to enter SW C settings.
It will show as below.
Description
1. Saved functions
2. Steering wheel input
(voltage)
3. Functions
4. Map the function to the steering wheel control
1
3
5. Save the function to the steering wheel control
6. Reset to default
7. High voltage steering wheel input
8. Low voltage steering wheel input
4 5 6 7 8
2
2
Steering Wheel learning Process
Before learning, press to reset RESET icon to remove any previous settings.
1. Input a steering wheel key. The voltage will show as on the description #2 above.
2. Tap the ASSIGN icon as shown on the description
#4 above, tap #2 to select key then tap the function as shown on the description #3 above to map the steering wheel key.
3. Tap the CONFIRM icon as shown on the description
#5 above to save the settings.
SWC Connecting Wires
SWC GND
SWC 1
SWC 2