VIVO DESK-V000KA Desk Riser Instruction manual

Add to My manuals
4 Pages

advertisement

VIVO DESK-V000KA Desk Riser Instruction manual | Manualzz

Wood 32” Desk Riser

Instruction Manual

SKU: DESK-V000KA

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

https://vivo-us.com/products/desk-v000ka

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST [email protected]

www.vivo-us.com

Chat live with an agent!

309-278-5303

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts.

Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

A (x1)

Adjustable

Desk

B (x1)

Keyboard

Tray

C (x4)

Sleeve Nut

D (x2)

Cable Clip

E (x3)

Pad

F (x4)

Rubber Feet

TOOLS NEEDED

Scissors

Phillips

Screwdriver

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

Separate the sleeve nut ( C ) into C1 and C2 .

C

33 lbs

(14.97kg)

STEP 2

Press C1 into holes on top of keyboard tray ( B ).

Apply pads ( E ) to underside of keyboard tray.

C1

B

C1 C2

E

STEP 3

Cut the large plastic tie beneath desk ( A ). Raise the desk by squeezing the handles underneath the desk. Cut the four plastic ties on the base of the desk.

A

F

2

STEP 4

Raise the desk by squeezing the handles underneath the desk. Cut the four plastic ties on the base of the desk.

STEP 5

Place keyboard tray (B) on metal brackets on desk (A) . Secure keyboard tray to brackets using screws (C2) and tighten with a Phillips screwdriver.

C2

STEP 6

Apply cable clips ( D ) to underside of desk.

D

STEP 7

If installing a monitor mount, remove the plug from the desktop, then secure the mount using grommet mounting hardware included with your monitor mount.

Place keyboard, monitor and other items on top of desk.

1

2

3

CAUTION!

Keep monitor and laptop base fully on the desktop.

Follow the cable routing instructions to avoid the potential to pinch cables.

Leave enough slack in cable to allow for full range of vertical motion (15” / 38 cm).

Raise desktop slowly to keep items stable.

Failure to follow these instructions may result in property damage and/or personal injury.

3

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

LAST UPDATED: 03/04/2020

Open

Monday - Friday 7:00am - 7:00pm

CST, our dedicated support team can offer immediate assistance with rapid response times.

If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. [email protected]

www.vivo-us.com

Chat live with an agent!

AVG. RESPONSE TIME (within office hrs) : 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within office hrs) : < 15 M

309-278-5303 AVG. RESOLUTION TIME (within office hrs) : 5M 4S

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

advertisement

Related manuals

advertisement