Wren Kitchens 800&1000 Adjustable Corner Base Unit Assembly Guide

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

800/1000

1000 Carousel

800/1000 Magic Corner

For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

BEFORE YOU START

INSTALLATION

SHOULD BE

PERFORMED BY A

COMPETENT

PERSON ONLY.

THIS PRODUCT COULD

BE DANGEROUS

IF INCORRECTLY

INSTALLED

Panel A

x1 Back Panel

Panel B

x2 End Panel

Panel C

x1 Base Panel

Panel D

x1 Muntin

Panel E

x2 Rail

Shelf

x1

Legs

x5

2nd Back Panel

x1

Frontal

(Packed separately) x1

Hinge Mounting Plate

x4 Inc Screws

L Bracket

x4

Space Plug

x2

Hinge

x2 Inc Screws

Page 1

(F) x12

Wooden Dowel

(G) x8

Cam Dowel

(Expanding)

(H) x8

Cam Lock

(P) x4

45mm

Screw Black

(K) x18

30mm

Screw

(L) x37

15mm

Screw

(M) x4

Cover

Cap

(N) x1

Door

Buffer

(Z) x5

Shelf Peg

Plastic

REQUIRED TOOLS

NOT to be used with CAM DOWEL

& CAM LOCK

For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

E

Seat

(G)

cam dowel into hole as shown.

B

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

Step 1

.

Seat dowel

(F)

into holes in both end panels

(B)

as shown.

Step 2.

Seat cam dowel

(G)

into holes in both end panels

(B)

as shown.

G

F F

G G F

F G

B

B

F

C

E

B

F F G

G

F

F

Dowel (F)

& Cam Dowel (G) location detail

Step 3.

Attach panels

(C)

&

(E)

to panels

(B)

, using cam dowel

(G)

& cam lock

(H)

(in blue ), and also using dowels

(F)

(in orange ) in positions as shown.

NB. All

Cam Locks (H)

are to be positioned facing the outside of the unit carcass, for ease of tightening.

G

G

View from underside

B

H

H

View from underside

B

Do

not

use power tools with cam dowel

(G)

or cam lock

(H)

Step 4.

Join panels

(C)

&

(E)

to

(B)

.

Insert cam lock

(H)

.

Do NOT tighten until

Step 6.

For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

Page 2

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

B

E

A

Step 5.

Slide back panel

(A)

into groove of end panels

(B)

.

Once back panel

(A)

is in position, ensure the panel is flush & square with bottom of end panels

(B)

.

Step 6.

Hand tighten all cam locks

(H)

, this will expand cam dowels

(G)

and tighten the unit together.

Step 7.

Secure back panel

(A)

with 4 x 30mm screws

(K)

equally spaced at the bottom of back panel

(A)

into base panel

(C)

, as shown.

Ensure you screw into the centre of base panel

(C)

(9mm from the edge).

C

C

B

B

9mm

A

K

P

E

D

B

P

C

E

Step 8.

Join muntin panel

(D)

to unit, use pilot holes to align muntin. Join muntin panel

(D)

, base panel

(C)

& rail panel

(E)

using 4 x 45mm screws

(P)

as shown.

Please refer to customer plan for left or right hand orientation.

Page 3 For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

Adjustable Corner Post Pack

K

K

Panel X

x1

Panel Y

x1

Packer Z

x2

Step 9.

Place packer

(Z)

flush with the front edge of the cabinet and up tight to the centre muntin.

Screw through from the cabinet using 2 x 30mm screws

(K)

in the top and 2 x 30mm screws

(K)

in the bottom, locations shown.

Please refer to customer plan for left or right hand orientation.

Step 10.

Place panel

(X)

together with the remaining packer

(Z)

flush as shown and screw together using 3x 30mm screws

(K)

equally spaced as shown.

Please refer to customer plan for left or right hand orientation.

K

K

K

Z

Step 11.

Place panels

(Y)

&

(X)

together with packer

(Z)

flush as shown and screw together using 4 x 30mm

(K)

screws equally spaced as shown.

Please refer to customer plan for left or right hand orientation.

For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

K

K

K

K

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

Page 4

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

Step 12.

Corner Blanking Panel. Measure and cut blanking panel to required width.

L

L

L

9mm

L

L

L L

Step 13.

Secure blanking panel with 9 x 15mm screws

(L)

, evenly spaced, as shown. Ensure you screw in the centre of panels (9mm from edge).

L

L

Page 5 For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

B

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

Front

C

C

B

Leg position diagram

C

L L

Front

B

Front

Step 14.

Secure each of the legs into place with 2 x 15mm screws

(L)

per leg.

Ensure legs are rotated as shown so that part of it is supporting the end panels

(B)

.

Front legs should have flat edge to the front

Step 15.

Lightly hit centre peg of leg base with hammer until flush.

B

B

Step 16.

Push leg firmly down into leg base.

Adjust legs to 155mm before turning carcass upright. Once in situ level accordingly.

C

B

For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

Page 6

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

Carousel

Please refer to separate instructions included with your carousel tray.

The middle shelf should be discarded when using the carousel tray.

Carousel

Page 7 For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

Magic Corner

Please refer to seperate instructions included with your magic corner.

The middle shelf and hinges should be discarded when using the magic corner.

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

800 & 1000 Magic Corner

For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

Page 8

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

Attach hinge plates onto panel

(D)

in locations shown using 4 x 15mm screws

(L)

.

(Ignore this step when fitting Magic Corner)

L L

from top

D B

126mm

94mm

from base

L Brackets

Use 2 x 15mm screws

(L)

to secure each of the L brackets to the cabinets at either side.

Then screw up through into the worktop as shown.

Screws for attaching to worktop are not supplied as these vary depending on worktop material and thickness. Ensure appropriate fixings for attaching worktop are used.

Page 9

Secure unit to wall using space plug.

Drill 2 evenly spaced pilot holes through the back brace into the wall and insert wall plugs. Then unwind space plug until it contacts both surfaces. Finally, tighten the screws.

Screws for attaching to walls are not supplied.

Securing to Adjacent Units

Screw into any side units using the screws

(L)

provided to secure to unit. At the top and bottom of both sides of the unit, place a cover cap

(M)

on the head to conceal it.

Worktop

Screw up through the front rail into your worktop to secure it in place.

Screws for attaching to worktop are not supplied as these vary depending on worktop material and thickness. Ensure appropriate fixings for attaching worktop are used.

For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

Step 17.

Insert hinge in top & bottom holes as shown.

Step 18.

Secure hinges by tightening

2 x screws with hinge dowels attached. These are already positioned within the hinges.

BASE UNIT

800 & 1000

Adjustable Corner

Assembly Guide

Step 19.

Attach the door to unit where required. Adjust hinges to suit.

See below.

To attach doorclip hinge onto hinge plate and click to secure.

Step 20.

Adjust hinge to suit. As shown below.

Hinge Plates

FRONTAL HINGE

ADJUSTMENT

To

adjust

hinge using a screw driver, tighten or loosen as required at points

1

&

2

.

Point

1

- In - Out

Point

2

- Left - Right

Step 21

Fit cover caps to hinge.

Adjust Softclose to suit.

Hinge Cover Caps

1

2

To

Release

door

Pull catch as shown, to release hinge from the hinge plate.

View from Inside of Carcass

For Internal Use: FI.WR.INS.023_WKIN00105_BASE_AdjCnr_800 -1000_2Dr_Rev4.indd

The top and bottom hinges

MUST

adjusted to the

be

SAME

STRENGTH.

Page 10