Iiyama ProLite XB3288UHSU-B1 User Manual
Add to my manuals28 Pages
The iiyama ProLite XB3288UHSU-B1 monitor boasts a stunning 32-inch display with a remarkable 3840 x 2160 resolution. Experience sharp, detailed visuals with a high contrast ratio of 3000:1 and a rapid response time of 3ms. Protect your eyes with Flicker-Free technology and the Blue Light Reducer feature. Enjoy immersive audio with the built-in 2 x 3W stereo speakers.
advertisement
USER MANUAL
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor.
Please keep this manual in a safe place for your future reference.
ENGLISH
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU “EMC
Directive”, 2014/35/EU “Low Voltage Directive”, 2009/125/EC “ErP Directive” and 2011/65/EU
“RoHS Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PL3288UH
We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com
You can access the Web page of different countries from there.
We reserve the right to change specifications without notice.
All trademarks used in this user manual are the property of their respective owners.
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................4
INSTALLATION ...............................................................................5
FITTING AND REMOVAL OF BASE ...............................................6
CONTROLS AND CONNECTORS..................................................7
CONNECTING YOUR MONITOR ...................................................8
COMPUTER SETTING ...................................................................9
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE ..............9
OPERATING THE MONITOR .............................................................10
ADJUSTMENT MENU CONTENTS ..............................................11
POWER MANAGEMENT FEATURE .............................................20
TROUBLE SHOOTING ......................................................................21
RECYCLING INFORMATION .............................................................22
APPENDIX ........................................................................................23
SPECIFICATIONS .........................................................................23
DIMENSIONS ................................................................................24
COMPLIANT TIMING ....................................................................24
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.
FOR YOUR SAFETY 1
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
When removing the tilt stand, the ventilation slots on the back side of the monitor can be blocked.
This may overheat the monitor and may cause fire or damage. Make sure to allow enough ventilation when removing the tilt stand. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.
CAREFUL! PROTECT YOUR HANDS AND FINGERS
Be careful not to hurt your fingers or hands when you change the height or the angle.
Injury can occur if care is not taken to avoid finger contact with the displays base when adjusting the height. (Just for height adjustable model.)
REMARK FOR 24/7 USAGE
This product is not specifically designed for 24/7 usage in all environments.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.
2 FOR YOUR SAFETY
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
because of the type of computer that is used. In this case, adjust the picture position to the correct position.
pattern you use.
after switching the image, when the same image is displayed for hours. In this case, the screen can be recovered slowly by changing the image or turning off the Power Switch for some hours.
CUSTOMER SERVICE
NOTE
discarded, please contact your dealer or iiyama service center for advice or replacement packaging.
CLEANING
WARNING
unplug the power cable immediately and contact your dealer or iiyama service center.
CAUTION
clean it.
NOTE
the LCD screen.
Thinner
Benzine
Abrasive cleaner
Spray-type cleaner
Wax
Acid or Alkaline solvent
CABINET
LCD
SCREEN
may cause degeneration or loss of paint on the cabinet.
Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
FOR YOUR SAFETY 3
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 3840 × 2160
High Contrast 3000:1 (Typical), Adv. Contrast Function Available / Brightness
300cd/m
2
(Typical) / Quick Response Time 3ms (Gray to Gray)
Flicker - Free
Blue Light Reducer
Digital Character Smoothing
2 × 3W Stereo Speakers
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.
Power Cable*
USB Cable
HDMI Cable
DisplayPort Cable
Stand-Base with a screw
Safety Guide
Quick Start Guide
CAUTION
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a power supply higher than this rating, then a power cable with a rating of 10A/
250V must be used. However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm² must be used.
4 BEFORE YOU OPERATE THE MONITOR
INSTALLATION
WARNING
hold the necessary weight of the display and the mount.
[WALL MOUNTING]
WARNING
stage, tighten the M4 Screw with washer which “L” length is 12mm to fasten the monitor. Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the monitor.
Screw
Mounting Stage
L
Chassis
[ROTATING THE MONITOR]
This monitor can only be used in landscape. Do not rotate or operate the monitor in any other orientation than landscape.
Available
A
Not Available
Power Indicator
A
Landscape
Power Indicator
Portrait
Power Indicator
BEFORE YOU OPERATE THE MONITOR 5
FITTING AND REMOVAL OF BASE
CAUTION
falls or is dropped.
damage.
<Installation>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Install the Stand-Base as shown on the below picture.
Tighten the ‘thumb screw’ provided to secure the base to the monitor.
Stand-Base
Hook
Stand-Base
Thumb screw for Stand-Base
<Removal>
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face down.
Loosen the ‘thumb screw’ to remove the Stand-Base from the monitor.
6 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS
<Front>
<Back>
Power Indicator
NOTE
Blue: Normal operation
Orange: Power Management
Speakers
USB Downstream Connector ( )
USB Downstream Connector ( )
USB Upstream Connector ( )
Cable Hole
Keyhole for Security Lock
NOTE
You can fasten a security lock and cable to prevent the monitor from being removed without your permission.
Headphone Connector ( )
DisplayPort Connector (DP)
HDMI Connector (HDMI2)
HDMI Connector (HDMI1)
AC Connector (AC POWER IN)
Navigation Button
Power Switch / Menu ( )
Scroll Up / Input Select ( ) *
Scroll Down ( )
Left / ECO Mode ( ) *
Right / Volume ( ) *
* You can skip the Menu items and directly display an option setting screen or an adjustment scale.
BEFORE YOU OPERATE THE MONITOR 7
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the Power Cable to the monitor first and then to the power source.
Turn on your monitor and computer.
To turn off your monitor, press and hold the Power Switch for 3 seconds when the menu is not displayed.
NOTE
The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorrect connection may cause serious damage to both the monitor and the computer. The cable supplied with the monitor is for a standard connector. If a special cable is required please contact your local iiyama dealer or regional iiyama office.
For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama office for a suitable adaptor.
The Class I pluggable equipment Type A must be connected to protective earth.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.
[Example of Connection]
<Back>
Mouse
Keyboard
Power Cable (Accessory)
[ Collect Cables ]
Put the cables through the cable hole to bundle them.
USB Cable (Accessory)
DisplayPort Cable (Accessory)
HDMI Cable (Not included)
Computer
HDMI Cable (Accessory)
AV Equipment etc.
8 BEFORE YOU OPERATE THE MONITOR
COMPUTER SETTING
Signal Timing
Change to the desired signal timing listed on page 24: COMPLIANT TIMING.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE
For optimal viewing it is recommended to position yourself directly opposite to the full face of the monitor, then adjust the monitor’s height and angle to your own preference.
Hold the panel so that the monitor does not topple when you change the monitor’s height or angle.
You are able to adjust the monitor's height up to 120mm, angle up to 45° right and left, 22° upward and 3° downward.
3°
22°
NOTE
Do not touch the LCD screen when you change the height or the angle. It may cause damage or break the LCD screen.
Careful attention is required not to pinch your fingers or hands into the moving part of the stand when you change the angle.
Injury can occur if care is not taken to avoid finger contact with the displays base when adjusting the height.
45°
Monitor
Stand
120mm
45°
BEFORE YOU OPERATE THE MONITOR 9
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 24. You are also able to adjust the picture by following the button operation shown below.
Press the MENU Button to start the On Screen Display feature. There are additional
Menu items which can be switched by using the
/
Buttons.
: Exit
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
OSD H. POSITION
OSD V. POSITION
OSD BACKGROUND
OSD TIME OUT
Select : PUSH
Select the Menu item which contains the adjustment icon relating to the adjustment you want to make. Press the MENU Button. Then, use the / Buttons to highlight the desired adjustment icon.
Press the MENU Button again. Use the / Buttons to make the appropriate adjustment or setting.
Press the Button to leave the menu, and the settings you just made would be automatically saved.
For example, to correct for OSD vertical position, select Menu item of OSD Settings and press the MENU Button. Then, select OSD V. Position by using the / Buttons and press the
MENU Button. Use the / Buttons to change the OSD vertical position settings. The OSD vertical position of the overall display should be changing accordingly while you are doing this.
OFF
10s
XB3288UHSU
50
50
: Exit Select : PUSH
Press the Button lastly to close the On Screen Display feature. All changes are saved in the memory.
NOTE
When button operations are aborted during adjustment, On-Screen Display disappears when the time set for the OSD Time Out has passed. Also, the button can be used to return previous menu and turn off the On-Screen Display.
Turning off the power should be avoided while using the Menu.
10 OPERATING THE MONITOR
ADJUSTMENT MENU CONTENTS
Picture
Adjustment Item
Picture Format * 1
Brightness *
3,4
Contrast *
4
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
: Exit
PICTURE FORMAT
BRIGHTNESS
CONTRAST
BLACK TUNER
SHARPNESS
OVERDRIVE
ADV. CONTRAST
ECO MODE
X-RES TECHNOLOGY
XB3288UHSU
FULL SCREEN
80
50
0
50
0
OFF
OFF
OFF
Select : PUSH
Problem / Option Button to Press
Full Screen
Aspect Ratio *
Dot By Dot
2
Full screen display
Expansion display of Aspect
Display the picture dot by dot.
Too dark
Too bright
Too dull
Too intense
Black Tuner
Sharpness *
1
Overdrive * 1,4
Adv. Contrast * 1,4
ECO Mode *
4
X-Res Technology
Direct
Off
Off
1
2
3
Off
Soft
Middle
Hard
From -5 to +5
You can adjust Dark shades.
You can change the picture quality from 0 to 100
(sharp to soft).
Press the Button to change the picture quality in numerical order. Press the Button to change the picture quality in reverse numerical order.
Adjust the picture quality at resolutions of less
3840 × 2160.
You can change the picture quality.
Off / -2 / -1 / 0 / +1 / +2
It will improve the gray level response time of the
LCD panel.
A higher level results in a faster response time.
On Increased Contrast Ratio
Typical Contrast Ratio
Normal
Brightness of back-light is reduced.
Brightness of back-light is reduced more than 1.
Brightness of back-light is reduced more than 2.
Normal
Enhance the picture edge.
Enhance the picture edge more than the Soft option.
Enhance the picture edge more than the
Middle option.
OPERATING THE MONITOR 11
* 1 Picture Format, Sharpness, Overdrive and Adv. Contrast are disabled when PiP/PbP Mode is activated.
* 2 Option unavailable with 16:9 resolution. When input video resolution is 4:3, 5:4 or 16:10, the image will be displayed in the center of the screen with 4:3 aspect ratio.
*
3
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
*
4
Adjustable / settable items depend on which item is activated. See page 19 Function Correlation
Matrix for more details.
Direct
You can skip the Menu items and directly display an option setting screen by using the following button operations.
Button when the Menu is not displayed.
12 OPERATING THE MONITOR
Color *
1
Warm
Normal
Cool
Adjustment Item
User Color
XB3288UHSU
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
WARM
NORMAL
COOL
USER COLOR
RED
GREEN
BLUE
I-STYLE COLOR
BLUE LIGHT REDUCER
0
OFF
OFF
OFF
Select : PUSH
100
100
100
: Exit
Problem / Option Button to Press
Warm color
Normal color
Cool color
Red
Green
Blue
Too weak
Too strong i-Style Color
Blue Light Reducer * 2
Game For PC game environment
Cinema For movie and video environment
1
2
3
Scenery For displaying outdoor scenery images
Text
For text editing and viewing in a word processing environment
Off
Off
Return to a state set by color adjustment except i-Style Color.
Typical
Blue light is reduced.
Blue light is reduced more than 1.
Blue light is reduced more than 2.
* 1 Functions other than Blue Light Reducer is disabled when Blue Light Reducer is activated.
* 2 Adjustable / settable items depend on which item is activated. See page 19 Function Correlation
Matrix for more details.
OPERATING THE MONITOR 13
PiP/PbP
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
PIP/PBP MODE
SUB WIN INPUT
PIP SIZE
PIP POSITION
SWAP
XB3288UHSU
PBP
DISPLAYPORT
SMALL
TOP-RIGHT
Adjustment Item
PiP/PbP Mode *
Sub Win Input
PiP Size
PiP Position
: Exit Select : PUSH
Off
PiP
PbP
HDMI1
HDMI2
DisplayPort
Small
Middle
Large
Top-Right
Top-Left
Bottom-Right
Bottom-Left
Option
PiP/PbP Mode is turned off.
Display the sub screen in the main screen.
Display the main screen on the left and the sub screen on the right.
Select the HDMI1 input.
Select the HDMI2 input.
Select the DisplayPort input.
Reduce the size of the Sub screen.
Normal size
Increase the size of the Sub screen.
Move the sub screen to the top right corner.
Move the sub screen to the top left corner.
Move the sub screen to the bottom right corner.
Move the sub screen to the bottom left corner.
Swap the Main/Sub screens when PiP/PbP mode is active.
Swap
* PiP = Picture in Picture
With this function, you can display two different pictures.
PbP = Picture by Picture
With this function, display images from two sources side by side.
PiP/PbP Input Matrix
PiP/PbP
Sub Screen
: Available
–
: Not available
HDMI1
HDMI2
DisplayPort
HDMI1
–
Main Screen
HDMI2
–
DisplayPort
14 OPERATING THE MONITOR
Input Select *
Direct
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
HDMI1
HDMI2
DISPLAYPORT
AUTO
XB3288UHSU
: Exit Select : PUSH
Adjustment Item
Input Select
NOTE
HDMI1
HDMI2
DisplayPort
AUTO
Option
Select the HDMI1 input.
Select the HDMI2 input.
Select the DisplayPort input.
Search for an available input source and select automatically.
However it will automatically be selected when just one source is using.
In Power Management Mode input switching is disabled.
Input source is fixed, not selected automatically when HDMI1, HDMI2 and DisplayPort which are selected.
* "Input Select" including direct operation below is disabled when PiP/PbP function is activated.
Direct
You can skip the Menu items and directly display an option setting screen by using the following button operations.
Button when the Menu is not displayed.
INPUT SELECT
: Exit
HDMI 1 HDMI 2 AUTO
Select : PUSH
OPERATING THE MONITOR 15
Audio
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
VOLUME
MUTE
AUDIO INPUT
XB3288UHSU
50
OFF
DISPLAY PORT
: Exit Select : PUSH
Adjustment Item Problem / Option Button to Press
Volume
Direct
Too soft
Too loud
Direct
On
Off
HDMI1
HDMI2
DisplayPort
Turn off the sound temporarily.
Mute
Audio Input *
Return the sound volume to the previous level.
Select the HDMI1 input.
Select the HDMI2 input.
Select the DisplayPort input.
* "Audio Input" selection is available only when PiP/PbP function is activated.
Direct
You can skip the Menu items and directly display an adjustment scale or an option setting screen by using the following button operations.
Keep pressing the Button for about 2 seconds when the Menu is not displayed.
Mute and Unmute are switched by repeating the above button operation.
16 OPERATING THE MONITOR
Language
Adjustment Item
Language
XB3288UHSU
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
: Exit
ENGLISH
Français
Deutsch
Nederlands
Polski
Česky
Italiano
日本語
English
Français
Deutsch
English
French
German
Nederlands Dutch
Polski Polish
Select : PUSH
Option
Česky Czech
Italiano Italian
Русский
Russian
Japanese
OSD Settings
Adjustment Item
OSD H. Position
OSD V. Position
OSD Background
OSD Time Out
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
OSD H. POSITION
OSD V. POSITION
OSD BACKGROUND
OSD TIME OUT
OFF
10s
XB3288UHSU
50
50
: Exit Select : PUSH
Problem / Option Button to Press
OSD is too left
OSD is too right
OSD is too low
OSD is too high
The background of OSD is made transparent.
Off / 1 / 2 / 3 / 4
You can set the OSD display duration time.
5 / 10 / 30 / 60 seconds
OPERATING THE MONITOR 17
Setup Menu
PICTURE
COLOR
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
SETUP MENU
DP FORMAT
HDMI
RGB
HDMI RGB RANGE
HDR
HDR
FREE
SYNC
FREESYNC
OPENING LOGO
LED
AUTO POW. OFF
MEMORY RECALL
INFORMATION
: Exit
XB3288UHSU
1.2
FULL RANGE
OFF
ON
ON
ON
OFF
NO
Select : PUSH
Adjustment Item
DP Format *
LED
1
HDMI RGB Range *
HDR
FreeSync
Opening Logo
2
Option
1.2
1.1
Full Range
Limited Range
On
Off
On
Off
On
Off
On
Off
Standard
If any abnormal picture visible, you can change the setting to 1.1.
For full-range color scale signalscale signal
For limited color scale signal
For HDR (High Dynamic Range) signal
For normal signal
Enable the Freesync function.
The Freesync function is turned off.
iiyama Logo displayed when the monitor is turned on. iiyama Logo does not display when the monitor is turned on.
The Power Indicator is turned On.
The Power Indicator is turned Off.
NOTE
Turn Off the Power Indicator when you are bothered by the light.
Auto Pow. Off
On
Off
Enable the Auto Pow. Off function.
Auto Pow. Off function is turned Off.
NOTE
The Auto Pow. Off function is enabled as default setting. Monitor will turn off automatically after 3 hours without any key operation.
If you prefer to use the monitor over 3 hours continuously, please disable The Auto Pow.
Off function.
Memory Recall
Information
Yes
No
Factory-preset data is restored.
Return to Menu.
Displays information regarding the current input signal coming from the graphic card in your computer.
<Example>
NOTE
PICTURE DP FORMAT
XB3288UHSU
RESOLUTION :
COLOR
HDMI
RGB
HDMI RGB RANGE
PIP/PBP
INPUT SELECT
AUDIO
LANGUAGE
OSD SETTINGS
HDR
FREE
SYNC
HDR
FREESYNC
OPENING LOGO
LED
AUTO POW. OFF
3840x2160@60Hz
H.FREQUENCY : 135 KHz
V.FREQUENCY : 60 Hz
See your graphic card user guide for more information about changing the resolution and refresh.
SETUP MENU MEMORY RECALL
INFORMATION
: Exit Select : PUSH
18 OPERATING THE MONITOR
*
1
*
2
To display 3840 x 2160 at 60Hz, the DisplayPort setting must be enabled as 1.2, and the source graphic card must be capable of supporting 3840 x 2160 resolution at 60Hz.
Available for HDMI input only.
Function Correlation Matrix
Adv. Contrast
Item activated
ECO Mode i-Style Color
Blue Light
Reducer
: Available
–
: Not available
Adv.
Contrast
–
–
–
ECO
Mode
–
–
–
Item to be selected i-Style
Color
Blue Light
Reducer Brightness Contrast Overdrive
– –
–
–
–
–
–
–
–
● Lock Mode
<OSD Menu>
1. The OSD lock will be activated by pressing the button for 5 seconds. If you try to access the
OSD by pressing any of the buttons, message "OSD Locked" will appear on the screen.
2. The OSD lock will be deactivated by pressing the button again for 5 seconds.
<Power Switch>
1. The power switch lock will be activated by pressing the button for 5 seconds. Locking the power switch means that won't be able to turn off the Monitor while the power switch is locked. If you press the power switch, message "Power Button Locked" will appear on the screen.
2. The power switch lock will be deactivated by pressing the button again for 5 seconds.
OPERATING THE MONITOR 19
POWER MANAGEMENT FEATURE
The power management feature of this product complies with power saving requirement of VESA
DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer.
There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by the operating system. Check your operating system manual for information on how this can be configured.
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor enters into Power Management Mode which reduces the power consumption to less than 0.5W. The screen becomes dark, and the power indicator turns to orange. From Power
Management Mode, the image reappears in several seconds when either the keyboard or the mouse are touched again.
Power Indicator
NORMAL MODE Blue
POWER MANAGEMENT MODE
Orange
POWER 0
CONSUMPTION
0.5W
* USB peripheral and audio equipment are not connected.
NOTE
100% off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.
signal is missing. In this instance, the POWER MANAGEMENT feature may not work properly.
20 OPERATING THE MONITOR
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the problem, discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Check Problem
The picture does not appear.
(Power indicator does not light up.)
(Power indicator is blue.)
(Power indicator is orange.)
The screen is not synchronized.
The screen position is not in the center.
The screen is too bright or too dark.
The screen is shaking.
No sound.
monitor.
The sound is too loud or too quiet.
the monitor.
the monitor.
TROUBLE SHOOTING 21
RECYCLING INFORMATION
For better environment protection please don't dispose your monitor.
Please visit our web site: www.iiyama.com for monitor recycling.
22 RECYCLING INFORMATION
APPENDIX
Design and specifications are subject to change without prior notice.
SPECIFICATIONS
Size Category
Panel technology
Size
Pixel pitch
LCD
Panel
Brightness
Contrast ratio
Viewable angle
Response time
Display Colors
Sync Frequency
Native Resolution
Supported max. resolution
Input Connector
Plug & Play
Input Video Signal
USB Standard
Number of USB Ports
Connector shape
Headphone Connector
Speakers
Maximum Screen Size
Power Source
Power Consumption*
Dimensions / Net Weight
Angle
Environmental Considerations
Approvals
32"
VA
Diagonal: 31.5" (80cm)
0.181mm H × 0.181mm V
300cd/m 2 (Typical)
3000 : 1 (Typical), Adv. Contrast Function Available
Right / Left : 89 degrees each, Up / Down: 89 degrees each
(Typical)
3ms (Gray to Gray)
Approx. 1.07B
HDMI (without FreeSync) :
Horizontal: 30.0-135.0kHz, Vertical: 55-75Hz
HDMI (with FreeSync) :
Horizontal: 30.0-135.0kHz, Vertical: 38-60Hz
DisplayPort (without FreeSync) :
Horizontal: 30.0-135.0kHz, Vertical: 55-75Hz
DisplayPort (with FreeSync) :
Horizontal: 30.0-135.0kHz, Vertical: 38-60Hz
3840 × 2160, 8.3 MegaPixels
3840 × 2160, 60Hz
HDMI × 2, DisplayPort
VESA DDC2B
TM
HDMI, DisplayPort
USB3.0
1 Upstream : Series B
2 Downstream : Series A
ø 3.5mm mini jack (Stereo)
3W × 2 (Stereo speakers)
698.4mm W × 392.9mm H / 27.5" W × 15.5" H
100-240VAC, 50/60Hz, 1.2A
47W typical, Power management mode: 0.5W maximum
Energy Efficiency Class: B
730.0 × 458.5 - 578.5 × 230.0mm / 28.7 × 18.1 - 22.8 × 9.1" (W×H×D)
8.9kg / 19.6lbs
Tilt: Upward: 22 degrees, Downward: 3 degrees
Swivel: Left/Right: 45 degrees each
Operating:
Storage:
Temperature
Humidity
Temperature
Humidity
5 to 35°C / 41 to 95°F
10 to 80% (No condensation)
-20 to 60°C / -4 to 140°F
5 to 85% (No condensation)
CE, TÜV-Bauart, VCCI, PSE, EAC
NOTE
* USB peripheral and audio equipment are not connected.
APPENDIX 23
DIMENSIONS
730.0mm/28.7”
700.5mm/27.6”
53.5mm/2.1”
300.0mm/11.8”
( ) : Maximum adjustment range
COMPLIANT TIMING
Video Mode
640 × 480
800 × 600
1024 × 768
1280 × 1024
1920 × 1080
1920 × 2160
3840 × 2160
NOTE
Horizontal
Frequency
31.469kHz
37.500kHz
37.879kHz
46.875kHz
48.363kHz
60.023kHz
63.981kHz
79.976kHz
67.500kHz
135.000kHz
67.430kHz
133.313kHz
135.000kHz
Vertical
Frequency
59.940Hz
75.000Hz
60.317Hz
75.000Hz
60.004Hz
75.029Hz
60.020Hz
75.025Hz
60.000Hz
60.000Hz
29.970Hz
59.997Hz
60.000Hz
* Recommended to use on PbP Mode.
Dot Clock
25.175MHz
31.500MHz
40.000MHz
49.500MHz
65.000MHz
78.750MHz
108.000MHz
135.000MHz
148.500MHz
297.000MHz
*
296.700MHz
533.250MHz
594.000MHz
24 APPENDIX
M230D21
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 FOR YOUR SAFETY
- 5 SAFETY PRECAUTIONS
- 7 SPECIAL NOTES ON LCD MONITORS
- 7 CUSTOMER SERVICE
- 7 CLEANING
- 8 BEFORE YOU OPERATE THE MONITOR
- 8 FEATURES
- 8 CHECKING THE CONTENTS OF THE PACKAGE
- 9 INSTALLATION
- 10 FITTING AND REMOVAL OF BASE
- 11 CONTROLS AND CONNECTORS
- 12 CONNECTING YOUR MONITOR
- 13 COMPUTER SETTING
- 13 ADJUSTING THE HEIGHT AND THE VIEWING ANGLE
- 14 OPERATING THE MONITOR
- 15 ADJUSTMENT MENU CONTENTS
- 24 POWER MANAGEMENT FEATURE
- 25 TROUBLE SHOOTING
- 26 RECYCLING INFORMATION
- 27 APPENDIX
- 27 SPECIFICATIONS
- 28 DIMENSIONS
- 28 COMPLIANT TIMING