PRODUCT INFORMATION

Pick it S2 MM

MM phono cartrige

MSRP 119 € (incl. VAT)

� Moving Magnet principle

� Split pole pins enables frequency responses that com-

pares very well to MC cartridges

� Strong cantilever based on high-end DJ cantilevers

� Suitable for low to medium tonearm masses

� 1/2 inch mounting standard

� High trackability

� Pick it S2 MM should be connected to phono MM inputs

� As with most MM cartridges, stylus may be exchanged

Output voltage at 1000 Hz, 5cm/sec: 7 mV

Frequency response: 20 - 20 000 Hz, +3/-1 dB

Tracking ability at 315 Hz at recommended tracking force: 70 µm

Stylus type: Special Elliptical

Tracking force, recommended: 1,8 g (mN)

Cartriddge weight: 7,2 g

Recommended load resistance: 47 kΩ

Recommended load capacitance: 150 - 300 pF

PRO-JECT AUDIO SYSTEMS www.project-audio.com

Technical data and price changes reserved.

Page 1/2

PRODUCT INFORMATION

The Pro-Ject Pick it S2 MM is manufactured by the car tridge experts at Ortofon and voiced by the design team at Pro-Ject. It is equipped with a special elliptical stylus tip. It provides detailed sound reproduction and expansi ve imaging. It is a no-nonsense performer with fascina ting musical resources. Attached to a strong cantilever, used in DJ cartridges, this cartridge will not just sound great, it is also very strong.

The cartridge is made from a unique combination of technologies. Among others Ortofon‘s well known split pole pins. This enables it to have a flat frequency response, which compares with MC cartridges. The superior treble output provides a dynamic and warm sound.

Inspired by the diamond found on the stylus, the Pick it

S2 MM is a beautiful design featuring a new and unique semi-transparent grey color. It goes perfectly with most

Pro-Ject record players.

PRO-JECT AUDIO SYSTEMS www.project-audio.com

Technical data and price changes reserved.

Page 2/2