Jlab Audio Studio Owner's Manual

We love that you are rocking JLab Audio!

We take pride in our products and fully stand behind them.

M

ITE

D TWO YE

AR

U.S

. BASED

U

ST

OM

ER SU

PP

O

YOUR WARRANTY

All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

CONTACT US

Reach out to us at [email protected]

or visit jlabaudio.com/contact

REGISTER TODAY

jlabaudio.com/register

Product updates | How-to tips

FAQs & more

FIRST TIME SETUP: BLUETOOTH PAIRING

1

Turn on the Bluetooth in your device settings.

Settings

2

When the Studio Wireless

Headphones are powered off, press and hold the

Power Button for approximately

8 seconds.

Bluetooth Fast blinking red and blue

light indicates searching for

Bluetooth device.

3

Select “JLab Studio” in your device settings to connect.

Settings

Bluetooth

JLab Studio

When the headphones are paired, voice prompts

“You are connected” and

blue light will flash slowly.

PAIRING NEW / ADDITIONAL DEVICES:

Turn OFF Bluetooth on your previously paired device and turn ON Bluetooth on new device.

Repeat FIRST TIME STEUP process for new devices.

Notes:

• Bluetooth is a wireless radio technology, which means it is sensitive to objects between the headphone and the connected device.

The headphone is designed to be used within 33 feet (10 meters) of a connected device, with no major objects in between (walls, etc.).

• Once successfully connected, the headphone will memorize your device and automatically pair when turned on in the future.

Only one device may be connected at a time. To pair a different device, first unpair the current one through its Bluetooth settings.

• If for any reason Bluetooth connection is lost, manually reconnect your Bluetooth device.

BUTTON FUNCTIONS

VOLUME UP: Click once

TRACK FORWARD:

Click & hold 2+ seconds

VOLUME DOWN: Click once

TRACK BACKWARD:

Click & hold 2+ seconds

POWER ON / OFF:

Click & hold 2+ seconds

PLAY / PAUSE / ANSWER /

REJECT INCOMING CALL:

Click & hold 1 second

“OK GOOGLE” (ANDROID):

Click twice

CHANGE EQ:

Press both buttons simultaneously

(Studio will cycle 3 EQ settings)

JLab SIGNATURE

(One Beep)

JLab C3™ signature sound with amplified vocals and bass

BALANCED

(Two Beeps)

Even sound with no additional sound enhancements

BASS BOOST

(Three Beeps)

Amplified bass and sub-bass

CHARGING

Note: For optimum performance, charge overnight with Micro

USB cable prior to using. Allow about 3 hours to fully charge.

Connect the Micro USB (included) to the headphone and connect the USB into a computer or AC adaptor (not included). Make sure the USB connection has a power output source.

Solid red light indicates the headphone is charging.

Solid blue light indicates charging is complete.

Note: Studio Bluetooth can still be used while charging.

Power on and connect to device after charging occurs.

CHARGING

OR

CAUTIONS

• Avoid getting moisture or liquids on the headphone cups.

• Avoid extreme heat, cold, and humidity.

• Avoid dropping or crushing headphones, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.

• Wax may build up in headphone cups, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to

improve the sound quality.

• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.

• If you experience regular discomfort while using this product, discontinue use and consult your physician.

• We recommend you treat your headphones as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products | Product alerts | Burn-in your headphones

JLab Audio + Burn-in Tool

JLABAUDIO.COM