Lenco 3807 Owner Manual

L-3807

replacing the needle

Replacing the needle.

1. Press with a finger on point A and press with a finger on point B.

2. Carefully pull the needle (orange part) with your other hand into the direction of arrow 1 to disconnect it from the cartridge (make sure there is enough counter pressure with finger A+B).

3. Remove the plastic protection cover from the new cartridge and carefully remove the needle.

4. Press with a finger on point A and press with a finger on point B.

5. Carefully push the needle (orange part) with your other hand into the opposite direction of arrow 1 to connect it with the cartridge (make sure there is enough counter pressure with finger A+B).

A

1

B

For information and support, www.lenco.eu

Or contact us by e-mail: [email protected]

by phone: +31 77 323 71 36