REFRIGERATOR-

FREEZER

OWNER'S

MANUAL(2~14)

PLEASE

READ THIS OWNER'S MANUAL THOROUGHLY

BEFORE OPERATING AND KEEP IT HANDY

FOR REFERENCE AT ALL TIMES.

FRIGORIFICO-

CONGELADOR

MANUAL

DEL

USUARIO(15~27)

LEA ESTE MANUAL EN SU TOTALIDAD ANTES DE

UTILIZAR EL EQUIPO Y

MANTENGALO

SIEMPRE A

MANO PARA POSIBLES CONSULTAS

FRIGO-CONGELADOR

MANUAL

DE

INSTRUCOES(28~40)

LEIA ESTE MANUAL DE

INSTRUCOES

ANTES DE

OPERAR O SEU FRIGO-CONGELADOR E

MANTENHA-O PERTO PARA QUALQUER

REFERENCIA.

P/NO. 3828JD8216X

CONTENTS

INSTALLATION

.........................................

3

FEATURE CHART

....................................

4

OPERATION

..............................................

5

Starting

Temperature Control

Ice

Making

Chilled Compariment

Deodorizer(option)

F. I. R.

Lamp(option)

SUGGESTIONS ON FOOD STORAGE

....

9

CLEANING

................................................

10

GENERAL INFORMATION

.......................

10

LAMP REPLACEMENT

............................

11

IMPORTANT WARNINGS

.........................

11

REPLACEMENT OF DOOR

OPENING TYPE......................................... 12

BEFORE CALLING FOR SERVICE

.........

14

2

THIS REFRIGERATOR IS MANUFACTURED WITH GREAT

CARE,

AND UTILIZES THE LAT-

EST IN TECHNOLOGY.

WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE

AND RELIABILITY.

BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.

IT PROVIDES EXACT INSTRUCTIONS FOR

INSTALLATION,

OPERATION AND MAINTE-

NANCE,

AND ALSO SUPPLIES SOME USEFUL HINTS.

INSTALLATION

1.

Select a good location.

Place your refrigerator where it is easy to use.

2.

Avoid placing the unit near heat sources, direct sunlight or moisture.

3.

There must be proper air circulation around your refrigerator

If your to refrigerator is keep it operating efficiently.

placed in a recessed area in the wall, allow at least 10 inches or greater clearance above the refrigerator and 2 inches or more from the wall.

The refrigerator should be elevated 1 inch from the floor, especially if it is carpeted.

4.

To avoid

If vibrations, the unit must be level.

required, adjust the leveling screws to compensate for unevenness of the floor.

The front should be slightly higher than the rear to aid in door closing.

Leveling screws can be turned easily by tipping the cabinet slightly.

Turn the the unit, leveling screws clockwise( counterclockwise(

) to raise

) to lower it.

5.

Install this appliance between 10˚C and 43˚C.

If the low or temperature around the high, cooling ability appliance may lessen.

is too

NEXT

1.

Clean your refrigerator thoroughly and wipe off all dust accumulated during shipping.

2.

Install accessories such as ice cube their proper box, etc., in places.They

are packed together to prevent possible damage during shipment.

3.

Connect the power supply cord (or plug) outlet. Don't double up with other to the appliances on the same outlet.

4.

Prior to storing food, leave your refrigerator on for

2 or

3 hours.

Check the flow of cold air in the freezer compartment to ensure proper

Your refrigerator is now cooling.

ready for use.

3

FEATURE CHART

FREEZER

COMPARTMENT

Freezer

Temperature

Control Dial

Freezer Shelf

(Plastic or

Steel)

Twisting

Ice Serve

(Option) or

General

Type

Ice

Making

Deodorizer

(Option)

Chilled

Compariment

Temperature

Control Dial

F.I.R

Lamp

Lamp (Option)

Shelves

(Plastic or

Steel or

Tempered Glass)

Multi Flow Duct

Distributes cold air to each part of refrigerator compartment.

Vegetable

Drawer

Used to keep fruits and vegetables, fresh and etc.

crisp.

NOTE

?If you found some other models.

parts missing from your unit, they may be parts only used in

4

Freezer Door Rack

Egg Storage

Rack

Wine Rack

(Option if steel shelf)

You can use this as

Vodka rack in the Freezer.

Dairy Corner

(Option)

Movable Rack

Bottle Guide

Refrigerator

Door

Rack

Leveling Screw

OPERATION

STARTING

When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures prior to filling it with fresh or frozen foods.

If operation is interrupted, allow

5 minutes delay before restarting.

TEMPERATURE CONTROL

REFRIGERATOR

5 6

4 7

3 8

2

COLD

1

TEMP. CONTROL

9

COLDEST

?

Your refrigerator has two controls that let you regulate the temperature in the freezer and refrigerator compartments.

?

Initially set the TEMP. CONTROL at "5" and the COLD AIR CONTROL at

"5"(plastic shelf) or

"7"(steel shelf).

Leave it operating for

24 hours(one day) to stabilize.

Then adjust the compartment temperature according to your desire.

FREEZER

COLD AIR CONTROL

1

5

9

REFRIG. MAX

NORMAL

FREEZER. MAX

?TEMP.CONTROL-1,2,3,4,5,6,7,8,9

The higher the number setting, the colder the refrigerator compartment will become.

?COLDAIRCONTROL-1,2,3,4,5,6,7,8,9

Setting at "9", the freezer compartment becomes colder.

But the refrigerator compartment becomes warmer because less cold air flows into the refrigerator compartment.

(PLASTIC SHELF)

COLD AIR CONTROL

FOR STEEL SHELF

REFRIG. MAX 1

7

9

NORMAL

FREEZER. MAX

?

In cold weather the unit operates dency to warm up.

For colder freezer, turn less and the freezer compartment has a tenthe COLD AIR CONTROL to "7"~"9".

(STEEL SHELF)

?

If you take a lot of foods in the freezer or open its door frequently, its temperature is apt to be somewhat higher.

In this case, set the COLD AIR CONTROL dial between

7 and

9 to cool it. Return the COLD AIR CONTROL dial to the original position to cut down the consumption of energy.

?

In hot weather or to put much foods in the refrigerator compartment, the refrigerator compartment has a tendency to warm up.

For colder refrigerator, turn the COLD AIR CONTROL to "2"~"4"to direct more cold air into the refrigerator compartment, and the TEMP. CONTROL to "7"~"9".

Setting at "7"~"9" of the COLD AIR

CONTROL, the refrigerator compartment will not be cold enough.

5

OPERATION

ICE MAKING

Kindly, Find your appliance is using General type or

Twisting ice serve type.

General

Type

To make ice cubes, fill the ice tray with water and place it on the Ice cube box. Then insert the ice cube box in the freezer compartment.

Ice

Trays

Ice Cube Box

To remove ice cubes, hold the tray twist gently.

at its ends and

Twisting

Ice Serve

Type

To make ice cubes, fill the ice tray with insert in its position.

water and

To remove ice turn cubes, hold the knob of the tray and gently.

Then, ice cubes drop in the ice cube box.

Ice Trays

Ice Cube Box

(In case of a steel shelf)

To place a shelf at a higher position, remove the ice cube box, and ice cube box.

place the shelf, and then replace the

Frame

You can remove compartment

Twisting

Ice Serve to use freezer larger.

You should remove

Ice first then

Trays and Ice Cube Box pull the frame out right side.

6

OPERATION

CHILLED COMPARIMENT

When the door is opened, the warmer air doesn't influence in the fresh meat.

So you can keep food fresher in it.

DEFROSTING

Defrosting takes place automatically.

The defrosted water flows down to the evaporating tray which is located in the lower back side of the refrigerator and is evaporated automatically.

DEODORIZER(OPTIONAL)

By using a catalyst, deodorizing performance is guaranteed.

Unpleasant odor of food in fresh food compartment is deodorized with no harm to you and the food.

How to use

As the catalyst is located in cooling air outlet for circulating air in fresh food compartment, there is no need for any handling.

Do not prick the cooling air outlet with a sharp tip because the deodorizing catalyst may be damaged.

When storing food with a strong odor, wrap it or store it in a container with a lid because odor may be passed on to other foods.

To remove the deodorizer, after in the inserting type figure at right.

take down while pulling it forward driver into the inside hole as shown

7

OPERATIONS

F.I.R

LAMP(OPTION)

Feature

Far Infrared

Rays emitted from Far Infrared

Ray Lamp restrains the dryness of the foods and keeps its original form without transforming.

By increasing the nucleic acid,

Far Infrared

Rays also keeps the aroma and the smell of the food for a long time.

More effective food

-

storage.

It is useful to store the food without seasoning such as salt or sugar, and the food needed the raw food uncooked to keep as low temperature with heating or no disinfecting.

(Sliced)

:

Raw Fish, Meat, Poultry and so on

It is useful to keep the original taste of the food by F.I.R's the

restraining excessive fermentation and overripe of the foods.

Vegetable with spices, Yogurt, and so on

It is useful to store the unsuited foods in the Freezer among the cooked foods or that go bad

-

Boiled easily.

Egg,

Bamboo

Shoots, Vegetable for seasoning, and so on

Operating

When the refrigerator begins to operate,

F.I.R

Lamp turns on.

During the refrigerator's operating, the on and off of the F. I. R

Lamp is automatically controlled by the refrigerator inner temperature.

Therefore it is not necessary to handle F.I.R

Lamp.

F.I.R

Lamp is coated with special materials for the vest results of F.I.R

Lamp's effect decreases.

If F.I.R

Lamp is veiled or covered, the F.I.R

Lamp's effect decreases.

If you store the foods effective F.I.R results.

wrapped in the vinyl or wrapper, not in the vessel with lid, the foods will get more

If you want to with the high check the F.I.R

temperature

Lamp operation, of its surface.

don't touch F.I.R

Lamp because you may burn your fingers

CAUTION

During

F.I.R

Lamp operation, don't touch F.I.R

Lamp because you may burn your fingers with the high temperature of its surface.

8

SUGGESTIONS ON FOOD STORAGE

STORING FOOD

Store fresh food in the in refrigerator compartment.

How food is frozen and defrosted is an important factor maintaining freshness and flavor.

Do not store food which goes bad easily at low temperatures, such as bananas, pineapples, and melons.

Allow hot food to cool prior to storing. Placing hot food in the refrigerator could spoil other food, and lead to high electric bills!

When storing, wrap food in vinyl, or place in a covered container. This prevents moisture from evaporating, and helps food to keep its taste and nutritional valve.

Do not block air vents with food. Smooth circulation of chilled air keeps refrigerator temperatures even.

Do not tures to open the door rise.

frequently. Opening the door lets warm air enter the refrigerator, causing tempera-

To adjust the temperature control easily, do not store food near the temperature control dial.

FREEZER COMPARTMENT

Do not store bottles in the freezer compartment

they may break when frozen.

Do not refreeze food that has been defrosted. This causes loss of taste and nutritional valve.

When storing frozen food like ice cream for a long period, place it on the freezer shelf, not in the door rack.

REFRIGERATOR COMPARTMENT

Avoid placing moist food on deep interior refrigerator shelves, it could freeze upon direct contact with chilled air. To avoid this it is better to store food in the covered container.

Always clean food prior to refrigeration. Vegetables and fruits should be washed and wiped, and packed food should be wiped clean, to prevent adjacent food from spoiling.

When storing eggs in their storage rack, ensure position, which keeps them fresh longer.

that they are fresh, and always store them in a up-right

NOTE

If you keep the refrigerator in a hot, and humid place, frequently open its door or put a lot of vegetables in it, dew may form in it, which has no effect on its cloth free from care.

performance.

Remove the dew with dust

If droplets form beneath the cover of the vegetable drawer, keep vegetables or fruits wrapped by plastic wrap.

9

CLEANING

It is important that your refrigerator be kept clean to prevent undesirable odors.

Spilled food should be wiped up immediately, since it may acidify and stain plastic surfaces if allowed to settle.

Never use metallic scouring pads, brushes, coarse abrasive cleaners or strong alkaline solutions on any surface.

Before you clean, however, remember that damp objects will stick or adhere to extremely cold surfaces. Do not touch frozen surfaces with wet or damp hands.

EXTERIOR

-

Use a lukewarm solution of mild soap or detergent to clean the durable finish of your refrigerator. Wipe with a clean, damp cloth and then dry.

INTERIOR

-

Regular cleaning of the interior and interior parts is recommended. If you have the

Wash all compartments with a baking soda solution. Rinse and dry.

INTERIOR PARTS

-

Wash door compartment shelves, racks, storage trays and magnetic door seals etc.

with a baking soda solution or a mild detergent and warm water.

Rinse and dry.

WARNING

Always remove power cord from the wall outlet prior to cleaning in the vicinity of electrical parts (lamps, switches, controls, etc.).

Wipe up excess moisture with a sponge or cloth to prevent water or liquid from getting into any electrical part and causing a electric short circuit. Do not use flammable or toxic cleaning liquids.

GENERAL INFORMATION

VACATION TIME

During average length vacations, you will probably find it best to leave the refrigerator in operation.

Place freezable items in freezer for

When you remove all longer life.

plan to be away for an extended period, food, disconnect the power cord, clean the interior to prevent thoroughly, and leave each door OPEN odor formation.

POWER FAILURE

Most power failures are and will not affect your corrected in an hour or two refrigerator temperatures.

However, you should minimize the number of door openings while the power is off.

During power failures of longer duration, place a block of dry ice on top of your frozen packages.

IF

YOU MOVE

Remove or inside the securely fasten down all loose items refrigerator.

To avoid damaging the leveling screws, turn them all the way into the base.

ANTI-CONDENSATION PIPE

The outside wall of the refrigerator cabinet may sometimes get warm, especially just after installation. Don't be alarmed.

This is due to the anticondensation pumps hot pipe, which refrigerant to prevent outer

"sweating" cabinet wall.

on the

Anti-Condensation

Pipe

10

LAMP

REPLACEMENT

1.

Unplug the power cord from the outlet.

2.

3.

4.

5.

Remove refrigerator shelves.

To remove the of the lamp cover, insert type lamp cover and pull it out forwards.

Turn the lamp counterclockwise.

driver at the one of under hole

Assemble in reverse order of disassembly. Replacement bulb must be the same specification as original.

IMPORTANT WARNINGS

DO NOT USE AN EXTENSION CORD

If possible, connect the refrigerator to its own individual electrical outlet to ances or household prevent it and other applilights from causing an overload that could cause a power outage.

ACCESSIBILITY OF SUPPLY PLUG

The refrigerator-freezer should be so positioned that the supply plug is accessible for quick disconnection when accident happens.

ABOUT

GROUNDING(EARTHING)

In the event of an electric short circuit, grounding

(earthing) reduces the risk of electric shock by providing an escape wire for the electric current.

In order to prevent possible electric appliance must be grounded.

shock, this

Improper use of the grounding plug can result in an electric shock. Consult a qualified electrician or service person if the grounding instructions are not completely understood, or if you have doubts on whether the appliance is properly grounded.

SUPPLY CORD REPLACEMENT

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

VERY DANGEROUS ATTRACTION

An empty refrigerator can be a attraction to children. Remove dangerous gaskets, latches, lids or the entire door from your unused appliance,or take some other action to make it harmless.

This appliance must be grounded(earthed).

DON'T WAIT! DO IT NOW!

NEVER STORE EXPLOSIVES AND CHEMICALS

11

REPLACEMENT OF DOOR OPENING

TYPE

-

Converting

Door is

Optional

PRECAUTION

1.

Before replacing the door opening type, first of all, you should take out foodstuffs and accessories like shelves or trays, and so on which are not fixed in the refrigerator.

2.

Use the '+' Driver, Bolt Driver, or remove the bolt.

Torque Wrench or

Spanner to fix

3.

Be careful not to fall down the refrigerator in disassembling or assembling the

Hinge

Lower and the

Adjustable

Screw Asm.

Don't lay the refrigerator down in working with it, it will cause to get out of order.

4.

Be careful not to the freezer or the drop the door in disassembling or assembling refrigerator door.

5.

This the refrigerator, according to the install position or user's liking, can be used as the type of opening from right or the left.

HOW TO REPLACE THE DOOR OPENING TYPE

(when converting

from the

left-opening type

to

right opening type)

1

Separate the

Cap and

Hinge Upper

.

2

Separating the Freezer Door .

3

2

1

4

Separating the Hinge

Lower .

3

Separating the Hinge-C and the

Refrigerator

Door .

5

4

6

12

REPLACEMENT OF DOOR OPENING

TYPE

5

Move the Position of

Assembly .

Adjustable Screw

6

Assemble the Hinge Lower

.

7

6

7

Move the

Cap ,

Bracket of the

Refrigerator

Door.

8

8

Move the

Cap and Assemble the

Hinge-C

.

10

4

9

9

Assembe the Door

Opening Type

Stopper-F e for

Right

3

10

Move the Cap e and Assemble the

Freezer Door

.

3

12

11

11

Move the Pin Position e of the

Upper.

Hinge

13

5

12

Assemble the

Cap .

Hinge Upper and the

2

1

13

BEFORE CALLING FOR SERVICE

SERVICE CALLS CAN OFTEN BE AVOIDED!

IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING

CAUSES FIRST

:

PROPERLY,

CHECK THESE POSSIBLE

PROBLEM

REFRIGERATOR DOES

NOT OPERATE

REFRIGERATOR OR FREEZER

COMPARTMENT TEMPERATURE

TOO WARM

ABNORMAL

NOISE(S)

REFRIGERATOR

HAS ODOR

DEW FORMS ON THE

CABINET SURFACE

POSSIBLE CAUSES

Has a house fuse blown or circuit breaker tripped?

Has the power cord plug been removed from the electrical wall outlet?

or loosened

Temperature control not set on proper position.

Appliance is placed close to wall or heat source.

Warm weather-frequent door openings.

Door is not closed

Door left open for a entirely.

long time.

Large amount of foods are kept in the refrigerator.

Refrigerator is installed in a weak or uneven place or leveling screw needs adjusting.

Unnecessary objects placed in the back side of the refrigerator.

Foods with or wrapped.

strong odors should be tightly covered

Interior needs cleaning.

Not unusual during periods of high humidity.

Door may have been left ajar.

14