advertisement
OWNER’S MANUAL
LG Wi-Fi
Sound Bar
Please read this manual carefully before operating your set and retain it for future reference.
MODEL
SL8Y (SL8Y, SPL8-W)
2009_Rev02
www.lg.com
Copyright © 2019-2020 LG Electronics Inc. All Rights Reserved.
1 Getting Started
1
2
Getting Started
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING:
Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION:
Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.
CAUTION:
The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION:
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.
The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
CAUTION:
No naked flame sources, such as lighted candles, should be placed on the apparatus.
NOTICE:
For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily
accessible.
Check the specification page of this owner’s manual to be certain of the current requirements.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits
the device.
CAUTION:
Only use the AC adapter supplied with this device. Do not use a power supply from another device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.
Symbols
~
Refers to alternating current (AC).
0
Refers to direct current (DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
Getting Started
3
1
4
Table of Contents
Table of Contents
1 Getting Started
14 Mounting the main unit on a wall
2 Connecting
16 – Installing “Google Home” App
17 – Launch the app to connect Wi-Fi
18 Wireless subwoofer and rear speaker (Sold
18 – Wireless subwoofer connection
20 – Rear speakers connection (Sold
24 – How to Affix the Ferrite Core
27 – ARC (Audio Return Channel) function
28 – Additional information for HDMI
29 Optional equipment connection
Table of Contents
5
3 Operating
35 Works with the Google Assistant
36 – Installing “LG Wi-Fi Speaker” App
37 Using a Bluetooth Wireless Technology
37 – Listening to Music of a Bluetooth Device
40 – Using your TV remote control
4 Troubleshooting
46 – NOTES to release Demo mode
5 Appendix
50 Important Information Relating to Network
1
2
3
4
5
1
6
Getting Started
Introduction
Symbol used in this manual
,
Note
Indicates special notes and operating features.
>
Caution
Indicates cautions for preventing possible damages from abuse.
Front panel
Getting Started
7
1
1
(Standby)
Switches the unit ON or OFF.
-
F
(Function)
Select the function and input source by pressing
F
repeatedly.
A
Input source / Function
Wi-Fi
Bluetooth
Optical
ARC
LG Sound Sync (Wired)
HDMI IN
USB
Display
WI-FI
BT
OPT/HDMI ARC
HDMI
USB
,
You can use
Bluetooth
function after making Wi-Fi network connection by using Google Home
app.
-
o / p
(Volume)
Adjusts volume level.
/
(Wi-Fi)
Selects Wi-Fi function.
B
Remote sensor
C
Display Window
Display window will be darkened automatically if there is no key input for 15 seconds.
When you press any button, the display window will brighten.
1
8
Getting Started
.
,
Precautions in using the touch buttons
y
Use the touch buttons with clean and dry hands.
In a humid environment, wipe out any moisture on the touch buttons before using.
y
Do not press the touch buttons hard to make it work.
If you apply too much strength, it can damage the sensor of the touch buttons.
y
Touch the button that you want to work in order to operate the function correctly.
y
Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions.
This unit will turn itself off to save electric consumption when the main unit is not connected to an external device and is not used for 15 minutes.
Rear panel
Getting Started
9
1
A
B
C
D
E
DC IN
Connect to the AC adapter.
HDMI OUT (TV ARC)
Connect the HDMI OUT (TV ARC) jack on the back of the unit to ARC jack on the TV.
-
HDMI IN
Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the external device.
You can enjoy the sound and picture from HDMI connection on an external device.
-
OPTICAL IN
Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV.
-
USB Port
Connect USB memory device to the USB port on the back of the unit.
1
10
Getting Started
Remote control
Replacement of Battery
Remove the battery cover on the rear of the remote control, and insert the battery with
4
and
5
matched correctly.
a b c d
1
(Standby)
Switches the unit ON or OFF.
y
Networked standby:
It allows the unit to switch to standby mode.
To turn on Networked standby function, Press
1
.
To turn off Networked standby function, press
1
for about 3 seconds.
VOL
(Volume)
o / p
Adjusts speaker volume.
C / V
(Skip)
-
Press
C
or
V
to go to next or previous file.
N
(Play/Pause)
Starts playback. / Pauses playback.
Getting Started
11
e
SOUND EFFECT
Selects a sound effect mode by using
SOUND EFFECT
.
On Display
ASC (Adaptive Sound Control)
BASS BLAST or BASS BLAST+
STANDARD
MOVIE
MUSIC
Description
Analyzes the property of the input sound and provides the sound optimized for the content in real time.
Reinforces the bass and powerful sound.
You can enjoy premium sound with MERIDIAN technology.
You can enjoy more immersive and cinematic surround sound.
You can enjoy more good sound for music source.
,
When this unit detects DOLBY ATMOS or DTS:X stream, you cannot change sound effect to any other. In this case, even though you press
SOUND EFFECT
, this unit does not respond. And you can see only “NOT SUPPORTED” on the display window.
y
TV remote:
It allows you to control the volume of this unit by your TV remote control even by other
To turn on or off the TV Remote function, press and hold
SOUND EFFECT
for about 3 seconds and
press it again.
,
Supported TV brands
LG
Panasonic
Philips
Samsung
Sharp
Sony Toshiba Vizio
f g h
(Sound tuning)
Adjusts sound level of each speaker.
Select the speaker you want to adjust by using and adjust the sound level by using
VOL
o / p
.
,
Adjusting rear speakers level is applied only when the rear speakers are connected.
Speaker Display Range
Sub Woofer
Center
Overhead Volume Control
Rear
Treble
Bass
WF
C
OVC
R
TRE
BAS
-15 ~ 6
-6 ~ 6
-6 ~ 6
-6 ~ 6
-5 ~ 5
-5 ~ 5
y
Surround sound:
It allows you to enjoy surround sound with rear speakers. (Page 21)
To turn on or off the surround sound, press and hold for about 3 seconds and press it again.
F
(Function)
Select the function and input source by pressing
F
repeatedly.
[
(Mute)
-
Press
[
to mute your unit. To cancel it, press
[
again.
1
1
12
Getting Started
i j k
J
(Information)
You can display various information of the input source by pressing
J
.
Wi-Fi: Connected Application name
-
BT (
Bluetooth
): Connected
Bluetooth
device name
OPT (Optical)/ARC/HDMI (HDMI IN): Audio format
USB: File information contained on a USB.
y
Auto Power ON/OFF:
It allows the unit to turn on and off automatically by input signals: Optical
To turn on or off AUTO POWER function, press and hold
J
for about 3 seconds and press it again.
REPEAT
-
Press
REPEAT
to select desired repeat or random mode.
FOLDER
W
/
S
Searches a folder on USB device.
Installing the sound bar
You can hear the sound by connecting the unit to the other device: TV, Blu-ray disc player, DVD player, etc.
Place the unit in front of the TV and connect it to the
device you want. (Pages 25 - 31)
You can place the wireless subwoofer anywhere in your room. But it is better to place the subwoofer near the main unit. Turn it slightly toward the center of the room to reduce the wall reflections.
For the best surround sound, place the speakers as shown below.
Getting Started
13
>
Caution
y
For best performance of wireless connection such as
Bluetooth
or wireless subwoofer, do not install the unit on Metallic furniture because wireless connection communicates through a module positioned on the bottom of the unit.
y
Be careful not to make scratches on the surface of the Unit /Subwoofer when installing or moving them.
Installing the additional foot
You can extend the height of the unit by using additional foot (height: 14 mm).
1
,
Note
y
If the sound bar covers the remote sensor of the TV, please separate distance between the sound bar and TV by 10 ~ 15 cm or more.
y
The illustration above may differ from actual units.
y
You can enjoy surround sound by using
Wireless Rear Speaker kit. Wireless Rear
Speakers Kit sold separately (SPK8-S).
1. Turn the unit upside down.
2. Peel off a sticker attached to the additional foot.
Then place it on the existing foot of the unit.
3. Press the additional foot with adequate force to get it firmly fixed.
1
14
Getting Started
Mounting the main unit on a wall
You can mount the main unit on a wall.
1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position.
>
Caution
Because it is difficult to make a connection after installing this unit, you should connect the cables before installation.
Preparation materials
Unit
2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.
Wall bracket install guide
Wall bracket
Screws
(Not supplied)
Screws (
A
)
Wall plug
3. Remove the Wall bracket install guide.
4. Fix the brackets with screws (
A
) as shown in the illustration below.
,
Note
Screws (
A
) and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
5. Put the unit on the brackets to match screw holes on the bottom of the unit.
6. Fix the unit with the screws firmly.
,
Note
To detach the unit, perform it in reverse order.
>
Caution
y
Do not install this unit upside down. It can damage the parts of this unit or be the cause of personal injury.
y
Do not hang onto the installed unit and avoid any impact to the unit.
y
Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product.
y
When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall.
Getting Started
15
1
2 Connecting
2
16
Connecting
Network connection
You can enjoy various functions of this sound bar by connecting to network and your smart device with
“Google Home” app.
Modem
Router
Media Server
Installing “Google Home” App
The “Google Home” app allows you to use various functions of this speaker through your smart device.
Requirements before setup
y
A wireless router must be connected to the internet. A smart device such as Android or iOS devices must be connected to the wireless router via Wi-Fi connection.
y
It needs Google account to use this app. During connect Wi-Fi, this app may request to create
Google account.
Through “Google Play” or “App Store”
1. Tap the“Google Play Store” icon or “App Store” icon on your smart device.
2. Type in “Google Home” in the search bar and tap
“Search” on “Google Play” or “App Store”
3. Select “Google Home” in the search result list to download.
The “Google Home” app is required to connect the sound bar wirelessly to the network.
,
Note
In a network environment (Router, Internet and Internet Service Provider) that supports both IPv4 and IPv6, the network automatically connects to IPv4 or IPv6 when connecting to the network.
You can check the each network status by selecting the settings of My Speakers
([Settings]>[IP Info.]) on the “LG Wi-Fi Speaker”
app.
Google Home
,
Note
y
Depending on the device version, “Google
Home” app may not work.
y
For more information, visit the web site. https://www.google.com/cast/setup/
Connecting
17
Launch the app to connect Wi-Fi
Make sure your smart device Wi-Fi feature is turned on. Once a connecting operation is performed, it does not need to be performed again.
,
Note
In case of iOS devices, it should be turned on
Bluetooth
setting on your smart device.
1. Tap the “Google Home” icon to launch the app.
3. When the speaker is properly connected to Wi-Fi,
“CONNECTED” will appear on the display window with sound.
,
Note
y
Depending on wireless router status, it might not work well Wi-Fi connection.
y
It is recommended that you use Wi-Fi Group
Play with less than 5 speakers.
y
“Google Home” app is provided by Google. It might be revised by a change of Google Policy.
2
2. Follow the screen on app to set speaker. Follow these instructions in order.
,
Note
y
Use the same Wi-Fi connection to set the speaker and your smart device.
y
If the
Bluetooth
setting turned on your smart device, it will be easy to connect Wi-Fi.
y
During installation, you should create a speaker name. It is needed when pairing the
Bluetooth
device. You can check and edit the speaker name. Follow the “Edit speaker
2
18
Connecting
Organizing cables
You can organize the cable with cable ties.
1. Hold the cables together with cable ties as shown below.
2. Tighten cable ties.
,
Note
After all connections are completed, you can
arrange cables as needed.
Connecting the AC
Adapter
Connect the sound bar to the power supply with the supplied AC adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter input.
3. Plug the AC power cord into an AC outlet.
Wireless subwoofer and rear speaker (Sold
Separately) connection
Wireless subwoofer connection
LED indicator of wireless subwoofer
LED Color Status
Green
(Blink)
Green
Red
The connection is trying.
The connection is completed.
The wireless subwoofer is in standby mode or the connection is failed.
The power cord of wireless subwoofer is disconnected.
Off (No
display)
Setting up the wireless subwoofer for the first time
1. Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
2. Turn on the sound bar. The sound bar and the wireless subwoofer will be automatically connected.
Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.
>
Caution
Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty.
Manually pairing wireless subwoofer
When your connection is not completed, you can check red LED on the wireless subwoofer and the wireless subwoofer does not make sound. To solve the problem, follow the steps below.
1. Press
on the rear of the wireless subwoofer.
Pairing
The green LED on the rear of the wireless subwoofer blinks quickly.
(If the green LED does not blink, press and hold
the
Pairing
.)
2. Turn on the sound bar.
Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.
Connecting
19
,
Note
y
It takes a few seconds (and may take longer) for the main unit and the subwoofer to communicate with each other and make sounds.
y
The closer the main unit and the subwoofer, the better sound quality. It is recommended to install the main unit and the subwoofer as close as possible and avoid the cases below.
There is an obstacle between the main unit and the subwoofer.
There is a device using same frequency with this wireless connection such as a medical equipment, a microwave or a wireless LAN device.
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
2
!
1 m
2
20
Connecting
Rear speakers connection (Sold
Separately)
Connecting the rear speakers
1. Connect the black stripe wire to the terminal marked - (minus) and the other end to the terminal marked + (plus).
>
Caution
y
Use the speaker supplied with this unit only. Using any other speaker may cause malfunction.
y
Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass.
LED indicator of wireless receiver
LED Color Status
Yellow - green
(Blink)
The connection is trying.
Yellow - green
The connection is completed.
Red
Off
(No display)
The wireless receiver is in standby mode or the connection is failed.
The power cord of wireless receiver is disconnected.
Setting up the wireless receiver for the first time
1. Connect the power cord to the wireless receiver to the outlet.
2. Turn on the main unit: The sound bar and wireless receiver will be automatically connected.
Yellow - green LED on the wireless receiver turns on.
2. Connect the wireless receiver and the rear speakers (right, left) with the speaker cables.
Color
Grey
Blue
Position
Rear right
Rear left
,
Note
You need to purchase the wireless rear speakers kit (SPK8-S) to enjoy surround sound.
Manually pairing wireless receiver
When your connection is not completed, you can see the red LED on the wireless receiver and rear speakers do not make sound. To solve the problem, follow the below steps.
1. Press
on the rear of the wireless
receiver.
Connecting
21
Surround sound
You can enjoy magnificent surround sound for all the input sound source with rear speakers.
If you turn on the surround function, the whole speaker outputs sound.
When you turn off the surround function, the speakers output sound as an original input sound
channel.
To turn on surround function, press and hold on the remote control for about 3 seconds and press it once again while “OFF - SURROUND” is scrolled.
To turn off surround function, press and hold on the remote control for about 3 seconds and press it once again while “ON - SURROUND” is scrolled.
2
The yellow - green LED on the wireless receiver blinks quickly.
2. Turn on the main unit
Paring is completed. The yellow - green LED on the wireless receiver turns on.
2
22
Connecting
Surround function ON
Sound Effect
ASC
BASS BLAST
or
BASS BLAST+
STANDARD
MOVIE
MUSIC
Input
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
No rear speakers
Output
Rear speakers connected
Connecting
23
Surround function OFF
Sound Effect
ASC
BASS BLAST
or
BASS BLAST+
STANDARD
MOVIE
MUSIC
Input
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
2.0 Ch
5.1 Ch
7.1 Ch or more
No rear speakers
Output
Rear speakers connected
2
2
24
Connecting
How to Affix the Ferrite Core
Ferrite core may not be provided depending on each nation’s regulations.
Affix the Ferrite Core for speaker cables
You must affix a ferrite core in order to reduce or eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the speaker cables around the ferrite core twice.
3. Close the ferrite core until it clicks.
,
Note
y
If there is a strong electromagnetic wave product nearby, interference may occur. Put the main unit and wireless receiver away from
there.
y
The wireless receiver will automatically switch to standby mode in a few minutes after the sound bar is turned off.
When the wireless receiver is in standby mode, the LED will turn on in red.
y
When you turn on the sound bar, the wireless receiver will turn on and the LED will change to yellow - green and then the rear speakers makes sound within a few seconds.
y
It takes a few seconds (and may take longer) for the main unit and Wireless Receiver to communicate with each other.
y
Use the rear speaker at least 30 cm away from either TV screen or PC monitor.
y
When the wireless receiver is being connected or disconnected with the main unit, output sound is maybe interrupted.
y
Set the distance between the sound bar and the wireless receiver as close as possible and keep them away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
!
1 m
Connecting
25
Connecting to your TV
Please connect with this unit and TV using the optical digital cable or HDMI cable considering the state of
the TV.
Using an OPTICAL cable
1. Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Optical cable
2. Select the input source to OPT/HDMI ARC by
pressing
F
repeatedly.
You can see “OPT” on the display window if connecting normally between this unit and your
TV.
,
Note
y
Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover.
y
You can enjoy the TV audio through the speakers of this unit. In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.)
y
Set up the sound output of TV to listen to the sound through this unit:
TV setting menu
[
[Sound]
[
[TV Sound output]
[
[External speaker (Optical)]
y
Details of TV setting menu vary depending on the manufacturers or models of your TV.
y
If this unit is connected by OPTICAL and ARC
at the same time, the ARC signal is a high
priority.
LG Sound Sync
You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with the LG TV that supports LG Sound
Sync. Make sure of the LG Sound Sync logo is on your
TV.
Controllable function by LG TV’s remote control:
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
Make one of the following connections, depending on the capabilities of your equipment.
,
Note
y
You can also use the remote control of this unit while using LG Sound Sync. If you use TV’s remote control again, the unit synchronizes with the TV.
According to TV Specifications, the volume and mute of this unit synchronize with TV.
y
When the connection fails, make sure of the condition of the TV and power.
y
Make sure of the condition of this unit and the connection in the cases below when using
LG Sound Sync.
-
T
he unit is turned off.
Changing to another function.
Disconnecting the optical cable.
y
The amount of time to turn off this unit is different depending on your TV when you set
AUTO POWER function to ON.
2
26
Connecting
LG Sound Sync with wired connection
1. Connect your LG TV to the unit by using an optical cable.
2
Optical cable
2. Set up the sound output of TV to listen to the sound through this unit:
TV setting menu
[
[Sound]
[
[TV Sound output]
[
[LG Sound Sync (Optical)]
3. Turn on the unit by pressing
1
.
4. Select the input source to OPT/HDMI ARC by
pressing
F
repeatedly.
You can see “LGOPT” on the display window if connecting normally between this unit and your
TV.
,
Note
Details of TV setting menu vary depending on the models of your TV.
Using an HDMI cable
If you connect this unit to a TV that supports HDMI
CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable.
1. Connect the HDMI OUT (TV ARC) jack on the back of the unit to ARC jack on the TV using an
HDMI cable.
HDMI cable
Connecting
27
ARC (Audio Return Channel) function
The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit.
To use this function:
Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On.
The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, refer to your TV manual.
You must use the HDMI cable (Type A, High Speed
HDMI™ cable with Ethernet).
You must connect the HDMI OUT on the unit with
HDMI IN of the TV that supports ARC function using an HDMI cable.
You can connect only one Sound bar to TV compatible with ARC.
What is SIMPLINK?
2
2. Select the input source to OPT/HDMI ARC by
pressing
F
repeatedly.
You can see “ARC” on the display window if connecting normally between this unit and your
TV.
,
Note
y
You can enjoy the TV audio through the speakers of this unit. In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.)
y
Set up the sound output of TV to listen to the sound through this unit:
TV setting menu
[
[Sound]
[
[TV Sound output]
[
[External speaker (HDMI ARC)]
y
Details of TV setting menu vary depending on the manufacturers or models of your TV.
y
Depending on your LG TV model, you may need to turn on the SIMPLINK function on your LG TV.
y
When you return to ARC function from another function, you need to select the input source to OPT/HDMI ARC. Then this unit changes to ARC function automatically.
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control:
Power on/off, volume up/down, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as shown above.
,
Note
y
Depending on the state of the unit, some
SIMPLINK operation may differ from your purpose or not work.
y
Depending on a TV or a player which is connected with this unit, SIMPLINK operation may differ from your purpose.
2
28
Connecting
Additional information for HDMI
y
When you connect an HDMI or DVI compatible device make sure of the following:
- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on
this player.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with
720 x 576p (or 480p), 1280 x 720p,
1920 x 1080i, 1920 x 1080p, 4096 x 2160p or 3080 x 2160p video input.
y
Not all HDCP-compatible HDMI or DVI devices will work with this player.
- The picture will not be displayed properly with non-HDCP device.
,
Note
y
If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.
y
Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.
y
When the HDMI connection with HDCP is not verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or disconnect the HDMI cable.
y
If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m.
y
You cannot change the video resolution in the
HDMI mode. Change the video resolution of the connected component.
y
If the video output signal is abnormal when your personal computer is connected to HDMI
IN jack, change the resolution of your personal computer to 576p (or 480p), 720p, 1080i or
1080p.
HDMI cable Checklist
Some HDMI cables have poor signal transmission, which can cause problems with sound and video transmission.
Even after HDMI cable connections, if no sound, sound interrupted, noise occurring from the sound bar and/or no video, no smooth video on your TV, the
HDMI cable may be the problem.
Use the cable marked with the premium HDMI certification logo. Also make sure that the your using cable is a certified Type A, Ethernet high-speed
HDMI™ cable.
STANDARD HDMI CABLE WITH ETHERNET
HIGH SPEED HDMI CABLE
(X)
(X)
(O)
HIGH SPEED HDMI CABLE WITH ETHERNET
Connection through HDMI Cable*
Your television must support the newest HDMI features (HDMI CEC
1)
/ ARC (Audio Return Channel)) to fully enjoy the Live broadcasting channel with audio system through an HDMI cable. Unless your
TV supports these HDMI features, the audio system should be connected through an OPTICAL cable.
1) HDMI CEC (High-Definition Multimedia Interface
Consumer Electronics Control)
Consumer Electronics Control (CEC) is an HDMI feature designed to allow the user to command and control the CEC-enabled devices, that are connected through HDMI by using only one of their remote controls.
*
Trade names for CEC are SimpLink (LG) , Anynet+
(Samsung), BRAVIA Sync (Sony), EasyLink (Philips),
etc.
Connecting
29
Optional equipment connection
DOLBY ATMOS®
What is DOLBY ATMOS®?
Dolby Atmos gives you amazing experience you’ve never before by overhead sound, and all the richness, clarity, and power of Dolby sound.
DTS:X®
What is DTS:X®
In the real world, sound is all around us, moving freely in any direction. DTS:X® is immersed in this natural, multi-dimensional sound experience as we go about our daily lives.
For using DOLBY ATMOS® and DTS:X®
y
To enjoy content containing Dolby Atmos® and
DTS:X®, the connected device and content must support Dolby Atmos® and DTS:X®.
y
DOLBY ATMOS® is available only in HDMI and ARC mode.
y
DTS:X® is available only in HDMI and ARC mode.
y
It is needed to set up an audio output on external devices (Blu-ray disc player, TV etc.) to “No encoding” such as “Bitstream”, “Auto” or “Bypass”.
If you can select audio output sampling rate, set it to 192 kHz.
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the external device such as
Blu-ray disc player, DVD player, etc.
2. Connect HDMI OUT (TV ARC) jack on the back of the unit to HDMI IN (ARC) jack on the TV.
3. Select the input source to HDMI or OPT/HDMI
ARC by pressing
F
repeatedly.
If you select HDMI, you can hear the sound from the external device. Select it when playing the
external device.
If you select OPT/HDMI ARC, you can hear the sound from your TV. Select it when watching
the TV.
You can see “DOLBY ATMOS” or “DTS:X” on the display window if connecting normally between this sound bar and your TV and the contents is
played.
,
Note
y
DOLBY ATMOS®/DTS:X® supports 3.1.2 channel. (5.1.2 channel when it connected with Rear kit)
y
If the sound bar does not have sound or the video on TV is not smooth, the HDMI cable may be the problem. Refer to the HDMI cable
2
30
Connecting
HDMI IN connection
You can enjoy the sound from the external device which is connected to HDMI IN jack on this unit.
OPTICAL IN connection
Connect an optical output jack of external devices to the OPTICAL IN jack.
2
To the Blu-ray disc player,
DVD player, etc.
1. Connect HDMI IN jack on the back of the unit to
HDMI OUT jack on the audio device such as Blu-
ray disc player, DVD player, etc.
2. Select the input source to HDMI by pressing
F
repeatedly.
To the optical output jack of external device
Optical cable
1. Connect the OPTICAL IN jack on the back of the unit to optical out jack of your external device.
2. Select the input source to OPT/HDMI ARC by
pressing
F
repeatedly.
You can see “OPT” on the display window if connecting normally between this unit and your
device.
,
Note
Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover.
Optional equipment connection
You can enjoy both sound and picture from the external device you connect.
Connecting
31
USB connection
Connect USB memory device to the USB port on the back of the unit.
OR
1. Connect HDMI IN jack of your TV to HDMI OUT jack on the external device such as Blu-ray disc
player, DVD player, etc.
2. Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
Or connect the HDMI OUT (TV ARC) jack on the back of the unit to HDMI IN (ARC) jack on the TV using an HDMI cable.
3. Select the input source to OPT/HDMI ARC by
pressing
F
repeatedly.
,
Note
If the sound bar does not have sound or the video on TV is not smooth, the HDMI cable may be the problem. Refer to the HDMI cable
For more information of playing files on a USB, refer
Removing the USB Device from the unit
1. Choose a different function/mode.
2. Remove the USB device from the unit.
Compatible USB devices
y
MP3 Player: Flash type MP3 player.
y
USB Flash Drive: Devices that support USB 2.0.
y
The USB function of this unit does not support some USB devices.
2
2
32
Connecting
USB device requirement
y
Devices which require additional program installation connected to a computer, are not supported.
y
Do not extract the USB device while in operation.
y
For a large capacity USB, it may take longer than a few minutes to be searched.
y
To prevent data loss, back up all data.
y
The unit’s USB Port cannot be connected to PC.
The unit can not be used as a storage device.
y
The exFAT/NTFS file systems are not supported on this unit. (FAT16/FAT32 systems are available.)
y
Depending on some devices, it may not available to recognize the followings on this unit.
-
External HDD
-
Card readers
Locked devices
-
Hard type USB devices
USB hub
Using USB extension cable
iPhone/iPod/iPad
Android device
Playable file
Sampling Frequency
MP3: within 32 to 48 kHz
OGG: within 32 to 48 kHz
AAC: within 8 to 48 kHz
Bitrate resolution
MP3: within 8 to 320 kbps
OGG: within 64 to 320 kbps
AAC: within 8 to 320 kbps
y
Maximum files: Up to 2,000
y
Maximum directories: Up to 200
y
A protected file by DRM (Digital rights management) cannot be played on the unit.
y
Video files in the USB storage device can not be
played.
y
Depending on the performance of your USB device, playback may not work well.
,
Note
y
Folders and files on the USB are recognized as below.
: Folder
: File
a
C
D
E b
F
G c
H
I d
J
A
B y
If there is no file in a folder, the folder will not
appear.
y
File will be played from file
$
A
to file
$
J
one by one.
y
Files will be played in order recorded and it may be different depending on the record circumstances.
y
This unit can display file or folder names that contain numbers or English characters only.
y
*ROOT: The first screen you can see when a this unit recognize the USB is “ROOT”.
Connecting
33
2
3 Operating
3
34
Operating
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing
F
repeatedly.
To
Playback
Pause
Press
N
.
Do this
During playback, press
N
.
Skip to the next/ previous file
During playback, press
V
on the remote control to go to the next file.
Playing less than 3 seconds,
press
C
on the remote control to go to the previous file.
Playing after 3 seconds, press
C
on the remote control to go to the beginning of the file.
Play repeatedly
or randomly
Search a folder
Press
REPEAT
on the remote control repeatedly. Refer to the note for details about the
display change.
Press
FOLDER
W / S
on the remote control.
,
Note
y
The resume point may be cleared when you pull out the power cord or removing the USB device from the unit.
y
Repeat/Random playback operates as follows.
On Display
OFF
ONE
FOLDER
ALL
SHUFFLE
Description
Plays songs on USB device in order.
Plays a same song
repeatedly.
Plays songs in a folder
repeatedly.
Plays all the songs on USB
device repeatedly.
Plays all the songs once randomly, and stops the playback.
Works with the Google
Assistant
This unit works with the Google Assistant. You can control some functions of this unit: Play and stop music and volume control.
Requirements
y
Google Assistant built-in device (Sold Separately)
y
This unit must be connected to Internet.
y
This unit must be registered in [Google Home]
app.
Operating
35
3
3
36
Operating
“LG Wi-Fi Speaker”
The “LG Wi-Fi Speaker”app is provided by LG
Electronics. This app allows you to use various functions of this speaker through your smart device:
Requirements before using
You should connect to Wi-Fi by using “Google Home”
app prior using this app. (Page 17)
Enjoying music on your device and home network server
You can listen to the music on your smart device and home network server.
Using Chromecast built-in
You can enjoy music contents through this sound bar with Chromecast enabled apps.
Setting and controlling the sound bar
You can manage the sound bar settings and control the sound bar even without remote control.
Requirements
y
A wireless router
must be connected to the
internet.
y
A smart device
such as a smartphone or tablet must be connected to the wireless router via Wi-
Fi connection.
,
Note
For more informations of “LG Wi-Fi Speaker”, follow the instructions of the application.
Installing “LG Wi-Fi Speaker”
App
Through Apple “App Store” or “Google
Play Store”
1. Tap the Apple “App Store” icon or “Google Play
Store” icon.
2. Type in “LG Wi-Fi Speaker” in the search bar and tap “Search”.
3. Select “LG Wi-Fi Speaker” in the search result list to download.
,
Note
y
“LG Wi-Fi Speaker” app will be available in version of the software as follow;
Android OS: Ver 5.0 (or later) iOS: Ver 10 (or later)
y
Depending on the device, “LG Wi-Fi Speaker” app may not work.
y
You can find the available application of this unit by using “LG Audio” app.
Android OS: Ver 5.0 (or later)
Operating
37
Using a Bluetooth
Wireless Technology
About Bluetooth
Bluetooth
is wireless communication technology for short range connection.
The sound may be interrupted when the connection interfered by the other electronic wave or you connect the
Bluetooth
in the other rooms.
Connecting individual devices under
Bluetooth
wireless technology does not incur any charges. A mobile phone with
Bluetooth
wireless technology can be operated via the Cascade if the connection was made via
Bluetooth
wireless technology.
y
Available Devices: Smart phone, MP3, Notebook,
etc.
y
Version: 5.0
y
Codec: SBC
Bluetooth profiles
In order to use
Bluetooth
wireless technology, devices must be able to interpret certain profiles. This speaker is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to Music of a
Bluetooth Device
Before you start the pairing procedure, make sure
that the
Bluetooth
feature on your smart device is turned on. Refer to your
Bluetooth
device’s user guide. Once a pairing operation is performed, it does not need to be performed again.
1. Turn on the speaker and connect Wi-Fi. Follow
“Network connection”. (Page 16-17)
2. Select the
Bluetooth
function by pressing
F
repeatedly.
“BT” and then “READY” appears in the display window.
3. Operate the
Bluetooth
device and perform the pairing operation. When searching for this speaker on your
Bluetooth
device, a list of the devices found may appear in the
Bluetooth
device display depending on the type of
Bluetooth
device.
Your speaker appears as “Speaker name (App setup)”.
4. Select the “Speaker name (App setup)”.
,
Note
y
Speaker name was setup on “Google
Home” app. For example, if the speaker name is set to “Living Room” in the
“Google Home” app, you will see “Living
Room” on your
Bluetooth
device.
y
You may check and edit the speaker name
on “Google Home” app (Page 39)
y
Depending on the
Bluetooth
device type,
some devices have a different pairing way.
For details about
Bluetooth
pairing, refer to your
Bluetooth
device manual.
3
3
38
Operating
5. When this unit is successfully connected with your
Bluetooth
device,
“PAIRED”
[
your device’s name
[
“BT” appears on the display window.
,
Note
y
If it is unavailable to display device name on the unit, “-” will be displayed.
y
To check the connected device’s name,
press
J
on the remote control. The connected
Bluetooth
device’s name is
displayed.
6. Listen to music.
To play music in your
Bluetooth
device, refer to your
Bluetooth
device’s user guide.
According to your
Bluetooth
device’s volume level, the volume level of
Bluetooth
will be adjusted.
,
Note
y
When using
Bluetooth
technology, you have to make a connection between the unit and
the
Bluetooth
device as close as possible and keep the distance.
However it may not work well in the case below:
There is an obstacle between the unit and
the
Bluetooth
device.
There is a device using same frequency with
Bluetooth
technology such as a medical equipment, a microwave or a wireless LAN device.
y
If last connected device is LG TV, this sound bar will connect to the TV automatically when you restart the sound bar.
y
If the LG TV is turned off, this sound bar will enter “READY” (
Bluetooth
ready) mode.
When the TV is turned back on, the Sound
Bar will not reconnect automatically. To connect the Sound Bar and the TV:
Turn the Sound Bar off and back on.
Then follow the TV’s on screen instructions.
y
Available TV: LG TV models released after
2016 and some TVs may not work well.
,
Note
y
This unit supports
Bluetooth
auto pairing.
However it does not operate in the case below:
When you restart this unit.
When you disconnect this unit by yourself.
When you disconnect this unit on the connected
Bluetooth
device.
y
The sound may be interrupted when the connection is interfered with by the some other electronic wave.
y
Pairing is limited to “One”
Bluetooth
device.
Multi-Pairing is not supported.
y
Depending on the type of the device, you may not be able to use the
Bluetooth
function.
y
You can enjoy using
Bluetooth
when using
Phone, MP3, Notebook, etc..
y
The more distance between the unit and the
Bluetooth
device, the lower the sound quality becomes.
y
Bluetooth
connection will be disconnected when the unit is turned off or the
Bluetooth
device gets to far from the unit.
y
If the
Bluetooth
connection is disconnected, connect the
Bluetooth
device again.
y
When a
Bluetooth
device is not connected,
“READY” appears on the display window.
y
If you change to another function after connecting
Bluetooth
device,
Bluetooth
connection will be disconnected. When you return to
Bluetooth
function,
Bluetooth
connection will be connected automatically.
y
When one
Bluetooth
device has connected to this unit, another device cannot find and connect to this unit. If you want to connect another device, disconnect the current device
and try again.
Controls connected Bluetooth device
You can control the connected
Bluetooth
device
from the unit; play, pause, skip, volume.
,
Note
y
Only Android OS and iOS is available to use this function.
y
This function may not be supported depending on the
Bluetooth
device or some of TV operated differently.
Edit speaker name
You can check and edit the speaker name on the
“Google Home” app.
Operating
39
3
3
40
Operating
Other operations
Using your TV remote control
You can control some functions of this unit by your
TV remote control even by other company’s product.
Controllable functions are volume up/down and mute.
Press and hold
SOUND EFFECT
on the remote control for about 3 seconds. “ON - TV REMOTE” appears and you can control this unit by your TV remote control.
To check the status of this function, press and hold
SOUND EFFECT
on the remote control.
To turn off this function, press and hold
SOUND
EFFECT
on the remote control and press it once again while “ON - TV REMOTE” is scrolled.
,
Note
y
Make sure that the sound output of your TV is set to [External speaker].
y
This function does not operate on LG TV’s magic remote control.
y
This function may not work well when some
TV control functions such as HDMI CEC,
SIMPLINK and LG Sound Sync set to ON.
y
Some remote control may not be supported.
AUTO POWER On/Off
This sound bar automatically turns on and off by an input source: Optical
To turn on this function, press and hold
J
on the remote control for about 3 seconds and press it once again while “OFF - AUTO POWER” is scrolled.
To check the status of this function, press and hold
J
on the remote control.
To turn off this function, press and hold
J
on the remote control for about 3 seconds and press it once again while “ON - AUTO POWER” is scrolled.
Turning on
When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and selects the suitable function. You can hear the sound from your device.
Turning off
When the TV is off, this sound bar switches to the
Networked standby mode.
,
Note
y
After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the TV connected by LG Sound Sync
(Optical).
y
After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the external device.
y
If you turned off the unit directly, it cannot be turned on automatically by AUTO POWER function. However the unit can be turned on by AUTO POWER function when optical signal comes in after 5 seconds of no signal.
y
Depending on the connected device, this function may not operate.
y
When you turn on this unit for the first time, status of Auto Power function is turned on.
y
You can set the AUTO POWER function only when this unit is turned on.
Auto function change
This sound bar recognizes input signals such as
Optical, HDMI ARC,
Bluetooth
, and “LG Wi-Fi
Speaker” app and then changes suitable function automatically.
When you turn on your TV or an external device
When you turn on your TV or an external device connected by the one among Optical, LG Sound Sync
(Optical), or HDMI ARC, this sound bar will change to a suitable function so you can listen to the sound through it.
When you try to connect a Bluetooth device
When you try to connect your
Bluetooth
device to this unit,
Bluetooth
function is selected. Play your music on the
Bluetooth
device.
When you play music by “LG Wi-Fi
Speaker” app
When you play music by “LG Wi-Fi Speaker” app on your smart device, this sound bar changes the function to WI-FI and you can listen to the music through it.
,
Note
This unit does not change the function to optical if SIMPLINK of the connected TV, Bluray disc player, set-top box or etc. device set to on or connected CEC supported device is turned on.
If you want to use the auto function change, turn off SIMPLINK function on your LG TV. It takes for about 30 seconds to turn off SIMPLINK.
Operating
41
3
3
42
Operating
Standby mode
The speaker switches to the standby mode if there is no music playback or no button operation.
Standby mode
If you press and hold
1
for about 3 seconds, the speaker switches to the standby mode. Then “GOOD-
BYE” appears on the display window. And all wireless network ports are deactivated.
Networked standby mode
Option 1.
When music is not played and buttons are not pressed for 15 minutes, the speaker switches to the Networked standby mode. Then “GOOD-BYE” appears on the display window.
Option 2.
If you press
1
, the speaker switches to the
Networked standby mode. Then “GOOD-BYE” appears on the display window.
Reset the Speaker
If the speaker doesn’t respond, reset the speaker.
Press and hold the
/
until you hear the beep sound once. You can see “RESET” on the display window.
Then all the stored wireless network information is
deleted.
4 Troubleshooting
Troubleshooting
43
Troubleshooting
General
Symptoms
The unit does not work properly.
The power does not turn on.
Sound is not produced.
No woofer sound
The remote control does not work properly.
The AUTO POWER
function does not work.
LG Sound Sync does not work.
Cause & Solution
y
Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
y
Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
y
Previous setting may not be saved when device power is shut off.
Is the power cord plugged into the outlet?
y
Connect the power plug to the outlet.
Is the volume set to minimum?
y
Adjust the volume.
y
When you are using connection with a external device (set top box,
Bluetooth
device etc.), adjust volume level of the device.
Is the mute function activated?
y
Press
[
or adjust the volume level to cancel the mute function.
Is the function selected properly?
y
Check the input source and select the correct input source.
Is the subwoofer plugged in?
y
Plug the power cord of subwoofer into the wall outlet securely.
Is pairing between the unit and the subwoofer disconnected?
y
Connect the unit and the subwoofer. (Page 18)
Is the remote control too far from the unit?
y
Operate the remote control within about 7 m.
Is there an obstacle in the path of the remote control and the unit?
y
Remove the obstacle.
Are the batteries in the remote control exhausted?
y
Replace the batteries with new one.
y
Check connection of the external device such as TV, DVD/Blu-Ray player.
y
Check the state of SIMPLINK on your LG TV and turn off SIMPLINK.
y
Depending on the connected device, this function may not operate.
y
Check whether your LG TV supports LG Sound Sync (Wired).
y
Check connection of LG Sound Sync (Wired).
y
Check sound setting of your TV and this unit.
4
4
44
Troubleshooting
Symptoms
When you feel the output sound of the unit is low.
USB is not recognized
Bluetooth
pairing does not work well.
The unit does not connect with
Bluetooth
device.
Cause & Solution
Check the details below and adjust the unit according to them.
y
Switch the state of DRC function to [OFF] by using “LG Wi-Fi Speaker”.
y
With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
y
With the sound bar connected with Player, change the AUDIO DIGITAL OUT setting on Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or
[BITSTREAM].
y
Change Audio DRC setting on connected device setup menu to [OFF] state.
y
Make sure that Night Time mode is not On. Turn off Night Time mode.
y
Format the USB device and connect it again.
When formatting the USB device, select file system as FAT16 or FAT32.
y
Be sure your
Bluetooth
device is on.
y
Switch
Bluetooth
off and on again on your
Bluetooth
device, then try pairing again.
y
Remove the obstacle in the path of the
Bluetooth
device and the unit.
y
Depending on the type of the
Bluetooth
device or surrounding environment, your device may not be paired with the unit.
y
Make sure the speaker connects to Wi-Fi by using “Google Home” app.
Troubleshooting
45
Network
Symptoms
Cannot connect the speaker to your home network.
Wi-Fi connection does not work well.
Cause & Solution
y
The wireless communication may be interrupted from household devices that are using radio frequencies. Move the speaker away from them.
y
Check your router. Try turning it off and back on.
y
Check that the Wi-Fi feature is turned on in your smart device.
y
Check that the speaker and your smart device are connected to same Wi-Fi.
If you restart the router?
y
You need to turn the speaker’s power off and on again.
If you install new router.
y
You need to perform a factory set and setup the network connection for speaker.
Application
Symptoms
The application doesn’t work properly.
Cause & Solution
Does an error occur when accessing the app?
y
Make sure that your smart device is compatible with the app.
y
Make sure that the application is the latest version.
y
Make sure that the connected unit turns on.
4
46
Troubleshooting
NOTES to use wireless
Symptoms
This device may have
wireless interference.
Bluetooth
device may
malfunction or make noise in the following
cases.
Cause & Solution
y
Wireless may not operate normally in weak signal area.
y
Please install the device close enough to wireless subwoofer.
y
Do not install the device on metal furniture for optimum performance.
y
When any part of your body contact the transceiver of the
Bluetooth
device
or sound bar.
y
When there is an obstacle or wall or the device is installed in a secluded spot.
y
When there is a device (a wireless LAN, a medical equipment or a microwave) using same frequency, make the distance between the products as far away as possible each other.
y
When connecting the device to the
Bluetooth
device, make the distance between the products as close as possible each other.
y
When the device gets too far from the
Bluetooth
device, the connection is disconnected and also malfunction may occur.
4
NOTES to release Demo mode
Symptoms
Can not change input source with
F
such as BT
(
Bluetooth
), HDMI etc. and only [DEMO] indication is showing in the front display.
Remote Control does not work. (No response)
Cause & Solution
Unplug the power cord and plug it in again.
If that doesn’t work, press and hold
F
(About 5 seconds) on the main unit until the display indicates current selected function.
5 Appendix
Appendix
47
File requirement
Available File extensions:
“.mp3”, “.aac”, “.ogg”
Sampling Frequency:
MP3: within 32 to 48 kHz
OGG: within 32 to 48 kHz
AAC: within 8 to 48 kHz
Bitrate resolution:
MP3: within 8 to 320 kbps
OGG: within 64 to 320 kbps
AAC: within 8 to 320 kbps
y
The file requirements are not always compatible.
There may have some restrictions by file features and media server’s ability.
y
Some wav files are not supported on this speaker.
y
Depending on the types of file or ways of recording, it may not play back.
y
Some DRM-loaded files are not supported on this speaker.
y
The types of supported files may differ depending on the operating system and/or the manufacturer of the smart device and PC.
Trademarks and licenses
All other trademarks are trademarks of their respective owners.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol together, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the
United States and/or other countries. © DTS, Inc.
All Rights Reserved.
The
Bluetooth®
word mark and logos are registered trademarks owned by the
Bluetooth
SIG, Inc. and any use of such marks by LG
Electronics is under license.
Other trademarks and trade names are those of their respective owners.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Atmos, and the double-D symbol are Trademarks of dolby Laboratories.
5
5
48
Appendix
Specifications
General
Power consumption
AC adapter
Dimensions (W x H x D)
Operating temperature
Refer to the main label on the unit.
Model: DA-50F25
Manufacturer: Asian Power Devices Inc.
Input: 100 - 240 V ~ 50 - 60 Hz
Output: 25 V
0
2 A
Approx. 1060.0 mm x 57.0 mm x 119.0 mm (with foot)
5 °C to 35 °C
Operating humidity
Bus Power Supply (USB)
5 % to 90 %
5 V
0
500 mA
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 192 kHz
Available Digital Input Audio format Dolby Atmos, Dolby Audio, DTS:X, DTS-HD, PCM
Input/Output
OPTICAL IN
HDMI IN
HDMI OUT
3 V (p-p), Optical jack x 1
19 Pin (Type A, HDMI™ connector) x 1
19 Pin (Type A, HDMI™ connector) x 1
1080p, 1080i, 720p, 576p, 480p
2160p@24/25/30 Hz 4:4:4
2160p@60/50 Hz 4:2:0
4K Sources dependent on HDCP 2.2 are supported at 4K resolutions.
Amplifier (RMS Output)
Total
Front
Center
Top
Subwoofer
440 W RMS
50 W RMS x 2 (4
Ω
at 1 kHz, THD 10 %)
40 W RMS (4
Ω
at 1 kHz, THD 10 %)
40 W RMS x 2 (4
Ω
at 1 kHz, THD 10 %)
220 W RMS (3
Ω
at 80 Hz, THD 10 %)
Wireless subwoofer
Power requirements
Power consumption
Type
Impedance
Rated Input Power
Max. Input Power
Dimensions (W x H x D)
Refer to the main label on the subwoofer.
Refer to the main label on the subwoofer.
1 Way 1 Speaker
3
Ω
220 W RMS
440 W RMS
Approx. 221.0 mm x 390.0 mm x 312.8 mm
System
Wireless LAN (Internal antenna)
802.11a/b/g/n Wi-Fi networks
SPK8-S (SPK8-S, S78S1-S), Sold Separately
Wireless receiver
Power requirements
Power consumption
Rear
Dimensions (W x H x D)
Refer to the main label on the wireless receiver.
Refer to the main label on the wireless receiver.
70 W RMS x 2 (3
Ω
at 1 kHz, THD 10 %)
Approx. 60.0 mm x 220.0 mm x 175.0 mm
Rear speakers (Each)
Type
Impedance
Rated Input Power
Max. Input Power
Dimensions (W x H x D)
1 Way 1 Speaker
3
Ω
70 W RMS
140 W RMS
Approx. 100.0 mm x 140.0 mm x 100.0 mm
y
Designs and specifications are subject to change without prior notice.
Appendix
49
5
5
50
Appendix
Handling the Speaker
When shipping the speaker
Please save the original shipping carton and packing materials. If you need to ship the speaker, for maximum protection, re-pack the speaker as it was originally packed at the factory.
Keeping the exterior surfaces clean
y
Do not use volatile liquids such as insecticide spray near the speaker.
y
Wiping with strong pressure may damage the surface.
y
Do not leave rubber or plastic products in contact with the speaker for a long period of time.
Cleaning the speaker
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the speaker.
Important Information
Relating to Network
Services
All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the
Service Provider from whom it originated.
The availability of and access to Content and
Services furnished by the Service Provider through the LGE Device are subject to change at any time, without prior notice, including, but not limited to the suspension, removal or cessation of all or any part of the Content or Services.
Should you have any inquiry or problem related to the Content or Services, you may refer to the
Service Provider’s website for the most up-to-date information. LGE is neither responsible nor liable for customer service related to the Content and Services.
Any question or request for service relating to the
Content or Services should be made directly to the respective Content and Service Providers.
Please note that LGE is not responsible for any
Content or Services provided by the Service Provider or any changes to, removal of, or cessation of such Content or Services and does not warrant or guaranty the availability of or access to such Content or Services.
Appendix
51
TERMS OF USE
These Terms of Use apply to those individuals and groups who use LG’s Wi-Fi speaker, any software(s) associated with LG Wi-Fi speaker, this application and any services associated this application (collectively
“LG Software”). They set out LGE’s responsibilities to you as well as identifying the “dos” and “don’ts” that you should be aware of when you use the
LG Software. LG Software is proprietary software owned by LG Electronics Inc., a corporation registered in Korea with its registered office at Yeouido-dong
20, Yeoungdeungpo-gu, Seoul, Korea. LGE, and its licensors (“LGE”, “us” or “we”).
By accessing or using LG Software, you confirm that you accept these Terms of Use and that you agree to comply with them. If you do not agree to these Terms of Use, you may not access or use the LG Software.
To the extent that any conflict arises between these
Terms of Use and any other document referred to in these Terms of Use, these Terms of Use will take precedence, unless clearly stated otherwise in the relevant document.
We grant you a non-exclusive license to use the preinstalled copy of LG Software solely to the extent necessary for you to use your LG Wi-Fi speaker personally and for no other purpose.
You acknowledge that all ownership rights in LG
Software anywhere in the world belong exclusively to us and that no ownership rights in LG Software are transferred to you. You are only entitled to the limited use of LG Software as is granted in these license
terms.
You may not copy, modify, decompile or reverse engineer our software in any way unless you are allowed to do so by law. We reserve the right to suspend, withdraw or discontinue all or part of the
Services without notice if we consider that you are in breach of these Terms of Use.
You acknowledge that LG Software has not been developed to meet your individual requirements. We make no promises or guarantees that LG Software is free from bugs or errors or that it will always be available. We use commercially reasonable efforts to provide LG Software on a continuous, high quality basis but cannot guarantee that they will always be available, uninterrupted or error free. It is possible that we may have to interrupt or discontinue the LG
Software or suspend or restrict your use of all or any part of the Services where we consider it reasonably necessary for technical, operational, security, legal or regulatory reasons.
We do not accept any responsibility if for any reason the Services or any part of them are unavailable at any time or for any period.
Although you may use LG Software to download and access content or applications made available by third parties on your LG Software, we make no promises or guarantees that you will always be able to access such content or applications. So far as we are legally able to do so, we exclude any warranties, conditions or other terms which may be implied into these license terms by law.
So far as we are legally able to do so, we exclude any liability for any loss or damage incurred by you or any other person in connection with your use of LG
Software. We are only responsible for loss or damage suffered that is a foreseeable result of our breach of these license terms or our negligence up to the amount specified below, but we are not responsible for any loss or damage that is not foreseeable .
Loss or damage is foreseeable if it is an obvious consequence of our breach or if it was contemplated by you and us when you starting using LG Software.
For any loss or damage that is not excluded under these license terms, whether in contract, tort (including negligence) or otherwise, the total liability of us and our group of companies to you is limited to the amount that you paid for your LG
Software service. To the extent permissible under the applicable laws, some jurisdictions do not allow the limitation or exclusion of liability for incidental or consequential damages, or have legislation that restricts the limitation or exclusion of liability, so the above limitation may not apply to you.
Nothing is these license terms shall limit or exclude our liability for death or personal injury relating from our negligence, fraud or fraudulent misrepresentation or any other liability that cannot be excluded or limited by law.
LG Software provides access to “apps” and link to other services owned and operated by third parties, such as content providers. Any third party apps, services and content that you access via the Services are made available to you by these third party providers and are outside the scope of these Terms of
Use.
Your dealings with any third party providers are solely between you and the relevant provider and may be subject to the provider’s own terms and conditions and privacy policy. We encourage you to read these documents, although we are not responsible for their content. We do not accept any responsibility for apps, services or content provided by third party providers.
5
5
52
Appendix
We may impose limits on the use of or access to certain third party content, application or services, in any case without notice or liability. We expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content, application or service made available through this LG Software. We are neither responsible nor liable for customer service related to the content, application and services. Any question or request for service relating to third party’s content, application or services should be made directly to the respective content and service providers or application developers, as appropriate.
These terms do not affect your statutory rights as a consumer.
Suitability of the Services for children and parental control tools
Modify this accordingly to suit if appropriate: The
Services are not directed at children under the age of 13 and are not structured specifically to attract children under 13. Further, certain content that you may access through your use of the Services may contain material that you consider indecent, objectionable or which may not be suitable for
children.
If you permit a child to use your LG Smart TV to access the Services, you are solely responsible for deciding whether or not the relevant Services are appropriate for access by that child.
[Your Smart TV offers a parental control tool (by way of a 4 digit PIN). If you have enabled the 4-digit
PIN, your LG Smart TV will not be able to display restricted content unless you type in the PIN. You are responsible for setting up and maintaining the parental control tool and any other controls that are available, and we will not be responsible for any harm, loss or damage you suffer or any other user of your
LG Smart TV suffers as a result of your failure to do so. Depending on the models of your LG Smart TV, these features may not be available.
Viruses and Security
Modify this accordingly to suit if appropriate: We use commercially reasonable efforts to ensure that the
Services are secure and virus free, but those efforts cannot and do not guarantee that the Services will be free from bugs, viruses, or other vulnerabilities.
Further, we do not accept responsibility for any loss or damage caused by a virus, distributed denialof-service attack, or other technologically harmful material that may infect your LG Smart TV, data or other material belonging to you, during your use of
the Services.
Modify as you think appropriate: Complaints
If you have any queries, concerns or complaints about the Services, please contact [include reference to non-personal LG email address].
Modify as you think appropriate: Miscellaneous
Unless expressly stated otherwise, these Terms of
Use and the documents referred to in them contain the entire agreement between us and you relating to your use of the Services and supersede any previous agreements, arrangements, undertakings or proposals, written or oral, between us and you relating to your use of the Services.
We may assign, sub-contract or otherwise transfer any or all of our rights and obligations under these
Terms of Use to any company, firm or person. We can only do this if it does not materially affect your rights under these Terms of Use. You may not assign, sub-contract or otherwise transfer your rights or obligations under these Terms to anyone else (except where you dispose of your LG Smart TV to a third party) unless you first agree this with us in writing.
If we decide not to exercise or enforce any right that we have against you at a particular time, then this does not prevent us from later deciding to exercise or enforce that right.
If any part of these Terms of Use is found to be illegal, invalid or otherwise unenforceable by a court or regulator, then, where required, that part shall be deleted and the remaining parts of the Terms of Use will continue to be enforceable.
These Terms of Use do not create or infer any rights that are enforceable by any person who is not party to them.
These Terms of Use are governed by the laws of the country where your LG Smart TV is sold and both you and LGE agree to submit to the exclusive jurisdiction of the courts of the country where your LG Smart TV is sold in connection with the same
This Agreement shall be governed by the laws of the
Republic of Korea, excluding their conflicts of laws provisions.
If you have any questions or comments about these
Terms of Use please contact www.lg.com.
These Terms of Use may be updated by LGE from time to time. If we make a material change to our Terms of Use, we will update you via your LG
Software or other means.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com
.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [email protected]
.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
Appendix
53
5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 3.1.2 channels 440 W DTS
- Audio Return Channel (ARC)
- Soundbar speaker RMS power: 200 W
- Grey Built-in display
- Wired & Wireless Bluetooth 5.0 Wi-Fi
Related manuals
advertisement
Table of contents
- 2 Safety Information
- 6 Introduction
- 7 Front panel
- 9 Rear panel
- 10 Remote control
- 13 Installing the sound bar
- 14 Mounting the main unit on a wall
- 16 Network connection
- 16 Installing “Google Home” App
- 17 Launch the app to connect Wi-Fi
- 18 Organizing cables
- 18 Connecting the AC Adapter
- 18 Wireless subwoofer and rear speaker (Sold Separately) connection
- 18 Wireless subwoofer connection
- 20 Rear speakers connection (Sold Separately)
- 21 Surround sound
- 24 How to Affix the Ferrite Core
- 25 Connecting to your TV
- 25 Using an OPTICAL cable
- 25 LG Sound Sync
- 27 Using an HDMI cable
- 27 ARC (Audio Return Channel) function
- 27 What is SIMPLINK?
- 28 Additional information for HDMI
- 29 Optional equipment connection
- 29 DOLBY ATMOS®
- 29 DTS:X™
- 30 HDMI IN connection
- 30 OPTICAL IN connection
- 31 USB connection
- 34 USB operation
- 35 Works with the Google Assistant
- 36 “LG Wi-Fi Speaker”
- 36 Installing “LG Wi-Fi Speaker” App
- 37 Using a Bluetooth Wireless Technology
- 37 About Bluetooth
- 37 Bluetooth profiles
- 37 Listening to Music of a Bluetooth Device
- 40 Other operations
- 40 Using your TV remote control
- 40 AUTO POWER On/Off
- 41 Auto function change
- 42 Standby mode
- 42 Standby mode
- 42 Networked standby mode
- 42 Reset the Speaker
- 43 Troubleshooting
- 43 General
- 45 Network
- 45 Application
- 46 NOTES to use wireless
- 46 NOTES to release Demo mode
- 47 File requirement
- 47 Trademarks and licenses
- 48 Specifications
- 50 Handling the Speaker
- 50 Important Information Relating to Network Services
- 51 TERMS OF USE