advertisement
hp
Setting the SCSI ID with DAT 24 and DLT
VS80 tape drives
Most tape drives are able to take advantage of the remote SCSI ID feature of the 1U Rackmount Tape Enclosure. Exceptions are the
DAT 24 and DLT VS80 tape drives. This is due to the incompatability of the internal connection between the rear panel switch and the tape drive.
For installations of the DAT 24 and DLT VS80 tape drives in the
1U tape enclosure, refer to the documentation that came with your tape drive for details on setting the SCSI ID using jumpers.
© Copyright 2004 Hewlett-Packard Development Company, L.P.
Printed in the U.S.A.
First Edition September 2004
A7443-96008
The information in this document is subject to change without notice.
A7 4 4 3 - 9 6 0 0 8
Login to continue
Close