Titan Fitness Single Vertical Mount Barbell Holder for T-3 Power Rack Manual
Add to My manuals4 Pages
Titan Fitness Single Vertical Mount Barbell Holder for T-3 Power Rack
The Titan Fitness Single Vertical Mount Barbell Holder for T-3 Power Rack is a convenient and space-saving way to store your barbells. It can be mounted on the exterior of your Power Rack using the included hardware. The Barbell Holder is made of durable steel and can hold up to 1000 pounds. It is compatible with barbells with a diameter of 1 inch or 2 inches.
Here are some of the features and benefits of the Titan Fitness Single Vertical Mount Barbell Holder for T-3 Power Rack:
- Durable steel construction: The Barbell Holder is made of durable steel that can withstand heavy use.
advertisement
![Titan Fitness Single Vertical Mount Barbell Holder for T-3 Power Rack Manual | Manualzz Titan Fitness Single Vertical Mount Barbell Holder for T-3 Power Rack Manual | Manualzz](http://s3.manualzz.com/store/data/054411806_1-e1239800645858fc717631fc62174d84-360x466.png)
-
MPN(s): T2VBARHLD.2, 1T2VBARHLD.2, 1X3VBARHLD.2, 1X3HBARHLD.2,
1VBARHLD.2
SKU(s): 400397.2, 400380.2, 400381.2, 400382.2,
UPC(s): 719318385043, 719318385715, 719318385760, 719318385753,
719318366585
KEY
1
4
5
6
2
3
BOX
1
1
1
1
1
1
DESCRIPTION
BARBELL HOLDER
SHIM
M12x90 HEX BOLT
M12 FLAT WASHER
M12 SPRING WASHER
M12 HEX NUT
5
6
3
4
KEY BOX
1 1
2 1
1
1
1
1
DESCRIPTION
BARBELL HOLDER
SHIM
M12x90 HEX BOLT
M12 FLAT WASHER
M12 SPRING WASHER
M12 HEX NUT
KEY
1
4
5
2
3
BOX
1
1
1
1
1
DESCRIPTION
VERTICAL BARBELL HOLDER
M12x110 HEX BOLT
M16 FLAT WASHER
M16 SPRING WASHER
M16 HEX NUT
QTY
1
2
2
2
2
2
2
2
1
QTY
1
2
QTY
2
4
4
4
4
4
2
KEY
1
2
3
4
5
BOX
1
1
1
1
1
DESCRIPTION
HORIZONTAL BARBELL HOLDER
M12x110 HEX BOLT
M16 FLAT WASHER
M16 SPRING WASHER
M16 HEX NUT
QTY
1
2
2
2
2
3
4
5
KEY
1
2
1
1
1
BOX
1
1
DESCRIPTION
VERTICAL BARBELL HOLDER
M12x110 HEX BOLT
M16 FLAT WASHER
M16 SPRING WASHER
M16 HEX NUT
2
2
2
QTY
1
2
− Attach the Barbell Holder (1) to your Power Rack
− Attach the Barbell Holder (1) to the uprights of your Power Rack using Hex
Bolt (3), Flat Washer (4), Spring Washer (5), and Hex Nut (6). o The order of assembly is Hex Bolt (3), Flat Washer (4), then insert the bolt through the Barbell Holder (1) and your Power Rack, Spring
Washer (5), and then place the Hex Nut (6) onto the end of the bolt then tighten it down until the Barbell Holder (1) is secure.
− Repeat this process for the remaining side of the Barbell Holder (1).
NOTE: Titan recommends ONLY mounting on the exterior of the Power Rack.
NEVER under a pull-up bar.
3
This concludes the BARHLD Owner’s Manual.
If applicable to your product, make sure to tighten all nut-and-bolt combinations before use.
Enjoy!
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any fitness equipment, including this one, involves the potential risk of injury. You accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 (800) 605 8241 [email protected]
/
Business Hours: Monday – Friday • 8:00 a.m.
– 5:00 p.m. (CT)
4
advertisement
Related manuals
advertisement