Yashica ZOOMATE 110W Instruction manual

The Yashica ZOOMATE 110W is a 35mm film camera with a built-in zoom lens. It offers features like multi-auto focus, Spot AF, programmed electronic shutter, and built-in flash. The camera can capture photos with the date and time imprinted, and includes self-timer/remote control functionality. It's a versatile camera suitable for capturing a wide range of photography subjects.

PDF
Document
Yashica ZOOMATE 110W Instruction Manual | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • 35mm film camera

  • Built-in zoom lens

  • Multi-auto focus

  • Spot AF

  • Programmed electronic shutter

  • Built-in flash

  • Date & time imprinting

  • Self-timer/Remote control

Frequently asked questions

It uses standard 135 film.

Yes, it has a built-in flash with various modes like Auto-Flash, Red-eye Reduction, Flash-off, Night Portrait, Fill-in Flash, and Landscape.

Yes, this model has a built-in date imprinting feature. You can choose from different date and time formats.

The maximum flash range depends on the film speed and zoom settings. For ISO 400 film, the range is up to 6 meters at wide-angle and 1.8m at telephoto.

User questions

J G

John J.

What is the procedure for installing film into the camera?

Press the Camera Back Release Knob to open the cover (avoiding bright light). Tilt and insert the film cassette bottom first. Pull the film leader out to the "I+FILM" mark and place it carefully over the spool top. Close the cover firmly. The film will automatically advance until the exposure counter displays “1.”

J G

John J.

What are the common causes preventing the shutter from releasing or the film from advancing automatically?

The issue is often related to exposure failure or a camera lock state. Potential causes include: 1. A flashing battery warning, requiring replacement. 2. The flash is charging (green LED blinking); wait until the LED is off. 3. The camera is locked in self-timer or remote mode; wait for the operation to complete or reset the mode. 4. Electronic failure due to electromagnetic interference; reset the circuit by removing and reinserting the battery (Time and Date must be reset afterward).

Preparing document for printing…
0%