K
X CLEAR
GALAXY Note
Screen Protector
User Manual
QR CODE
QR CODE
Open camera and enable Bixby
Vision to scan the QR Code.
For installation video, please scan this QR
Code to direct you to the Video URL.
WHAT'S IN THE BOX
Scraper
PLEASE read the installation instruction
carefully BEFORE applying the film.
Alignment Mount
)
)
eo
Stopper
Screen Protector
У x
XK K |
X CLEAR X CLEAR Cleaning
WET DRY | "pes
WIPES WIPES
Dust Absorber
Sticker
INSTALLATION
IMPORTANT! Please Remove Case
Before Installation.
1. Use the wet wipe to remove any dirt or
liquid from the screen.
2. Use the dry wipe to guarantee any
remaining debris has been removed.
INSTALLATION
3. Dab the sticker side of the dust-absorber
to eliminate any amount of debris from the
screen.
INSTALLATION
4. Tear off tape on Stopper and stick it
down onto a desk or table. Place edge of
smartphone up against the Stopper.
Peel off
——
O Flip and stick to the table
X WO LA
Za MIA
-
© Align your phone to the Stopper
Lie
Note: Make sure Stopper is attached
firmly to a solid flat surface and the
phone cannot slip.
INSTALLATION
5. Insert the Alignment Mount at the
bottom of the phone and ensure it fits
snugly.
rer
Note: Guarantee there is no gap
between your phone and the Alignment
Mount. You will hear a “clicking” sound
when attached properly.
INSTALLATION
6. Align the three holes on the screen
protector into the three grooves of the
Alignment Mount. Align the hole at the
top of the screen protector to the Galaxy
Note camera.
—F—
| INSTALLATION
PART 1
/Nerrennon
PLEASE read the installation instruction
carefully BEFORE applying the film.
| INSTALLATION
PART 2
INSTALLATION PART 1
7. Press down on “Paste Start Line”, then lift
up tab 1, and use the scraper to press
down and away to attach screen protector.
© ( J. Tap 7
-
-
-
<
>
Top of the
ne < TU
A
<
>
Scraper
Stopper
о
INSTALLATION PART 2
Now that Installation Part 1 is complete,
let's move on to Part 2.
8. Lift up Tab 2 and detach Alignment
Mount.
Lift Up С
petach
9. Rotate your phone.
Stopper
| INSTALLATION
PART 2
‘wy ays buiddde 340439 А|пуэлеэ
UO]PNA3SU! UONE|EISU! Y peas 35VTTd
4
dull Mes 33sed
| | 5
INSTALLATION PART 2
10. Lift up Tab 2, press down on “Paste
Start Line” and use the scraper to press
down and away to attach the last half of
the screen protector.
Bottom of
the Phone
Scraper
Stopper
INSTALLATION
11. Peel off the top film.
7 E
INSTALLATION
12. Press down on your screen so protector
forms to your screen. You must align the
screen protector to the curved edges of
your phone by using the scraper and push
from the center of the screen to the edges
horizontally. For air bubbles, use the
scraper to press down and towards the
sides of the screen.
Note: Do not use the scraper in a
vertical direction when applying the
screen protector to the curved surfaces
of your phone.
USER FAQ
Q: Should 1 tear off the layer of film that
surrounds the screen protector? Which
layer of film should | remove?
A: Every screen protector is comprised of
three layers. Do not remove either of the
layers of film by hand. Use the scraper to
push the film off and do not remove the
film by hand.
Q: I see several air bubbles across my
screen. How do | remove them?
A: Use the scraper to push the air bubbles
towards the edge of the screen in a
horizontal fashion. If you still see air
bubbles, there is dirt under your screen
protector. Please remove the screen
protector and use the dirt/dust absorber
sticker properly.
Q: Does my screen protector guarantee
it will protector my screen from drops
and falls?
A: No. This screen protector will not
provide support from accidental drops or
falls. Instead, it will provide support by
preventing scratches and eliminating
smudges from fingerprints and oils.
USER FAQ
Q: The screen protector is emitting a
faint chemical-like smell. What is it and
how long does it take to go away?
A:The smell comes from the glue of the
protector and is normal for the attachment
process. The smell will fade after a few
days.
Q: Can I manually peel off the protective
film instead of using the scraper?
A: No. You cannot peel off the layers of
protective film by hand. Instead, you must
use the scraper as detailed within the user
manual. (WARNING: IF YOU PEEL BY HAND,
IT WILL CAUSE PERMANENT AIR BUBBLES).
Q: How many screen protectors come
inside the box?
A: There are three screen protectors that
come in the box. Each protector is made
up of three layers. The top and bottom
layer are the protective film, while the
middle layer holds the screen protector.
A
\
X CLEAR
LIFETIME WARRANTY
DATE OF PURCHASE
A
Need Help? Email us:
[email protected]
">
