PRIVACY GLASS SCREEN PROTECTOR
TOP
TOP
1.
Take the wet wipe and use it to remove any dirt on the screen.
2. Then take the dry wipe and make sure all dust and liquid has been removed.
BOTTOM
3.
Place the protector guidance frame on top of the phone and mount it on the phone securely. according to the imprinted text on the frame.
BOTTOM
4.
Dab the sticker side of the dust-absorber to remove any amount of debris on the screen.
TO
P
5.
Remove the bottom protective layer by pulling away the top rectangular tab.
6.
Without touching the sticky side of the protector, gently tap the top of the protector to the top side of the frame making sure the protector falls exactly between the frame.
7.
Carefully drop the screen protector onto the screen. Always make sure the top edge of the screen protector is adjacent to the top side of the assistive frame.
TOP
BOTTOM
8.
Tap the center of the screen protector.
The protector will begin to adhere to the screen. If there are any air bubbles, push your finger down and drive the bubbles out towards the closest edge.
9.
Congratulations. Your phone is now protected!
FAQ
Why doesn't it fit my phone?
Please check if the screen protector type you purchased matches the size of your phone.
Please align the top of the frame and size it up carefully.
I see air bubbles. How can I remove them?
Clean the screen very carefully and use the dust-absorber sticker to get rid of the dust. Also, use the sticker to eliminate the dust from the back of the screen protector.
Will this screen protector interfere with my phone’s sensor or facial recognition?
Don’t worry. There will be no interference. This screen protector is compatible with all iPhone features.
Privacy Glass Screen Protector
