Insignia NS-IP18129GLS Glass Screen Protector for Apple® iPad® Pro 12.9" (3rd Generation 2018) Quick Setup Guide

V1

FINAL

FOR PRINT

QUICK SETUP GUIDE

Glass Screen Protector

PACKAGE CONTENTS

• Screen protector • Polishing cloth

• Dry cloth • Dust removal adhesive

• Wet cloth • Quick Setup Guide

Before using your new product, please read these instructions to prevent any damage.

FEATURES

• Impact resistant glass

• Crystal clear screen without bubbles

• Simple installation with quick setup guide directions

• Compatible with most cases

Final flat size: 10.5 × 2.75 in. (266.7 × 69.85 mm )

Final fold size: 2.625 × 2.75 in. (66.46 × 69.85 mm)

ATTACHING YOUR SCREEN

PROTECTOR

1 Wipe down the surface area you are working on to remove residual dust, and then clean your device screen thoroughly with the wet cloth, then with the superfine dry cloth. Use the dust removal adhesive to clean any remaining debris. Do not use any solvents.

2 Remove the adhesive backing from the screen protector.

3 With the adhesive side of the screen protector facing the device screen, align the top of the screen protector with the top of the device and place one edge onto the screen. It will begin to adhere to the device screen.

4 Push out any bubbles with your finger or the provided polishing cloth. Start from the center of the protector and work your way to the edges.

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

For customer service, call

1-877-467-4289 (U.S. and Canada) or

01-800-926-3000 (Mexico) www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

©2018 Best Buy. All rights reserved.

Made in China

V1 ENGLISH 18-0434