Mega Lite CIRCA SCOOP XL LED Owner Manual
Mega Lite CIRCA SCOOP XL LED is a high-power LED fixture designed for professional lighting applications. It features 464 RGB LEDs, 108 Warm White LEDs, and 60 Warm White + Amber LEDs, providing a wide range of color options and effects. The fixture has a 140-degree beam angle, making it suitable for illuminating large areas. It also has a built-in dimmer and strobe function, allowing for precise control over the light output. The CIRCA SCOOP XL LED can be controlled via DMX-512, making it compatible with most lighting control systems.
Advertisement
Advertisement
USER MANUAL
Table of Contents
Safety Information……………………………………...………………3
Specifications………………………………………...…………………4
Size………………………………………………………………………5
Main Power Connection…………………………...…………………..6
DMX-512 Connection……………………………..…………………...6
Main Control Menu……………………………………………………..7
Rigging the Fixture……………………………….…………………….9
DMX Profile.....................................................................................9
Cleaning & Maintenance...............................................................13
Parts List.......................................................................................13
Accessories……………………………………………………………13
Check that the unit has not been damaged during transport
Protection Against Fire
1. Maintain a minimum of 1 foot distance from any type of flame.
3. Replace fuse only with the specified type and rating.
4. Do Not install the unit to close to a heat source.
5. Make sure cable are properly secured away from unit movement.
6. Maximum surface operating temperature 104 º.
Protection Against Electrical Damage
1. Disconnect power before lamp replacement or servicing.
2. For connection to main power supply proceed to page 6.
3. This unit must be earthed. (electronically grounded)
4. Do not expose unit to rain or moisture.
5. Unit must not be left on for a long period of time.
Protection Against Mechanical Hazards
1. Use safety chain when hanging unit.
2. Use quality clamps or bolts when positioning unit
3. Do not open unit risk of electrical shock.
3
240V 50/60 HZ
Specifications
Part Numbers
Fixture
5201 – Circa Scoop XL LED
Mechanical Specifications
DMX Connectors:
5-pin XLR Connectors
Power Connectors:
Power Con Type
Mounting Yoke:
Square Yoke
Thermal:
Maximum ambient temperature 110° F
Maximum surface temperature 140° F
Fastening System:
2 Quick Release Clamp Mounts
Electrical Specifications
LED Quantity:
Fuse:
464 RGB 108 Warm White 60 Warm White + Amber
LED Angle:
140° (outer ring)
Power Input Voltage:
110V-240 50/60 Hz
Ballast:
Power Consumption
Electronic auto switching
Watts:
Amps:
528
4.57
LED Lifetime:
Scan Rate:
5x20 F5AL250V
*
7000Hz
60 to 100 thousand hours
Flight Case
CAS 5201 2 Dual Road Case
SMD LEDS Watts:
0.8 Watt each
Control & Programming
DMX 512 Protocol
DMX Modes:
Control Options:
Mode 1 2 Channels
Mode 2 3 Channels
Mode 3 17 Channels
Mode 4 52 Channels
Mode 5 55 Channels
Display Control
Dimmer, Macro
Dimmer, Warm White, Amber
Dimmer, Outer R, G, B, Macro, Macro Speed, Outer Strobe, Inner R, G, B, Macro, Macro Speed, Inner Strobe,
Warm White, Amber, Reflective Center, Center Strobe
Dimmer, Outer, RGB x 8, Inner RGB x 8, Warm White, Amber, Reflective Warm White
Dimmer, Outer, RGB x 8,Outter Strobe, Inner RGB x 8, Inner Strobe, Warm White, Amber, Reflective Warm
White, Center Strobe
4
*
LED Manufactures rated average life span
Size
28”
26.30”
22.25”
14”
5
Fixture Size
28" X 14" X 26.5"
Fixture Weight
27lb
Packaged Size
32.5" X 18.5" X 30"
Packaged Weight
35.5lb
Main Power Connection
Caution!
1. Do not connect fixture to a dimmer system.
2. This unit must be earthed. (electronically grounded)
3. Replace fuse only with the specified type and rating.
4. Power link maximum 3 units at 110V
This device is equipped with a auto switching power supply that will allow you to work from 100V-240V 50/60Hz
The occupation of the connection-cable is as follows:
Cable (USA) Cable (EU) Pin 110V 220V
Black
White
Green
Brown
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
L
L
110V
Connection
220V
Connection
N
L
L
L
DMX-512 Connection
The fixture is equipped with 5 pin XLR Sockets for DMX input and output. The sockets are wired in parallel. Only use a shielded twisted pair cable designed for RS-485 and 5 pin XLR plugs and connectors in order to connect the controller with the fixture or the fixture with another.
DMX—Input
1
2
3
5
4
1. Shield
2. Signal (-)
3. Signal (+)
4. N/A
5. N/A
DMX—Output
5
4
3
1
2
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a
120 Ohm resistor between the (-) and the (+) signal into a 5 pin XLR plug and plug it in to the last fixture on the signal run. Pre-manufactured terminator plugs are available for purchase from your Mega-Lite dealer (P-DMX-T).
6
Display Control
Mega Lite
Circa XL Scoop
V1.2
Address
001
DMX On
ESC DOWN UP ENTER
DMX Address
Press
Enter
to select the DMX start channel. Use the
up/down
keys (001 to 512) , Press
Enter
to confirm the setting. Press
ESC
to return to Main Menu.
(Notes: Display must be on Main Menu for fixture to operate on DMX Mode)
Main Menu
>Channel Mode
LED Dimmer
LED Strobe
Channel Mode
Press
Enter
to select the DMX Channel mode of operation. Use the
up/down
keys to select Channel mode from
2 CH Dimmer, Macro
3 CH Dimmer, Warm White, Amber
17 CH Dimmer, Outer R,G,B, Macro, Macro Speed, Outer Strobe, Inner R,G,B, Macro, Macro Speed, Inner Strobe, Warm White, Amber ,Reflective Center, Center Strobe
52 CH Dimmer, Outer RGBx8, Inner RGBx8,Warm White, Amber, Reflective Warm White
55 CH Dimmer, Outer RGBx8, Outer Strobe, Inner RGBx8, Inner Strobe, Warm White, Amber, Reflective Center, Center Strobe
Press
Enter
to confirm the setting. Press
ESC
to return to Main Menu.
LED Dimmer
Main Menu
Channel Mode
>LED Dimmer
LED Strobe
For LED Dimmer control press
Enter.
Select from 255 steps. Of the 52 ch. Press
ESC
to return to Main Menu.
Main Menu
Channel Mode
LED Dimmer
>LED Strobe
Strobe
This function allows you to select a preprogrammed strobe sequences. Press
Enter
use the
up/down
keys to select desired strobe program (15 options). Press
Enter
to set the desired sped use the
up/down
keys (15 options). Press
Enter
to confirm the settings.
(note; Dimmer of selected intensity must be dimmed prior in Dimmer option)
Main Menu
>Fan Test
Auto Mode
Auto Speed
Fan Test
Press
Up Or Down.
Select from Center Fan Test or Ring Fan Test
7
Main Menu
>Auto Mode
Auto Speed
Temperature
Main Menu
Auto Mode
>Auto Speed
Temperature
Main Menu
Auto Mode
Auto Speed
>Temperature
Auto Mode
Press
Enter.
Select from 6 modes Press
ESC
to return to Main Menu.
(Note: If you want to have fixture remain on Auto Test do not press ESC and just power off and on fixture to return to last setting)
Auto Speed
Press
Enter.
Select from 6 modes Press
ESC
to return to Main Menu.
(Note: If you want to have fixture remain on Auto Test do not press ESC and just power off and on fixture to return to last setting)
Temperature
This fixture is equipped with internal temperature sensors. Once head reaches a temperature of 96°the IP rated fan will engage
Main Menu
Dimmer Speed
Temperature
>Setting
Setting
Setting Control Options
Config Menu
>Oled Back Light
DMX Fail
Dimmer Setting
To turn off display screen after 2 minutes of no use select
Disable
. To enable screen to remain on when in use select
Enable
.
Config Menu
LCD Back Light
>DMX Fail
Dimmer Setting
To hold the last DMX command is case of DMX Signal loss select
Enable
. To have the fixture DMX Setting at 0 if DMX signal is loss use
Disable
option.
Config Menu
LCD Back Light
DMX Fail
>Dimmer Setting
Select Dimmer Setting to be used for dimming type when used in Ch3 mode.
Linear
Square Law
Inv. Square Law
S Type
Restore fixture to original factory display settings
Config Menu
DMX Fail
Dimmer Setting
>Factory Reset
8
Caution!
1. The installations must be carried out by an authorized dealer or trained professional.
2. Unit may cause severe injures if you have doubts concerning the safety do not install.
3. Unit is to be 24inches away from flammable materials (decoration material)
4. Use high quality installation equipment to hang unit.
When rigging a unit it is very important that you follow common safety procedures. Rigging requires extensive experience including but not limited to calculating working loads, material being used and periodic safety inspections. If you lack these qualifications, do not attempt the installation yourself, instead use a professional structural rigger.
When rigging the unit always be secured with a secondary safety attachment. The installation location of the projector has got to be built in the way that it can hold 10 times the weight for 1 hour with out any harming. Installation should be checked at least one time a year by a skilled person.
DMX Profile
Circa XL Scoop LED 2 Ch Mode
DMX Channel Function Description
1 Dimmer
2 Macro
Dimmer Off to Full
No Function
Macro 1 (slow to fast)
Macro 2 (slow to fast)
Macro 3 (slow to fast)
Macro 4 (slow to fast)
Macro 5 (slow to fast)
Circa XL Scoop LED 3 Ch Mode
DMX Channel
1
2
3
Function
Dimmer
LED Color
LED Color
Description
Dimmer Off to Full
Center & Back Warm White
Center Amber
Value
0-255
0-41
42-83
84-125
126-167
168-209
210-255
Value
0-255
0-255
0-255
Init
255
0
Init
255
255
255
9
Circa XL Scoop LED 17 Ch Mode
DMX Channel Function Description
1 Dimmer Master Dimmer Off to Full
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
LED Color
LED Color
LED Color
Outer Ring
Macro
(Select Color)
Macro Speed
Outer Ring
Strobe
LED Color
LED Color
LED Color
Inner Ring
Macro
(Select Color)
Macro Speed
Inner Ring
Strobe
Warm White
Amber
Warm White
Center Strobe
Outer Red LED intensity
Outer Green LED Intensity
Outer Blue LED Intensity
No Function
Fade Clockwise
Fade Counter Clockwise
Snap Clockwise
Snap Counter Clockwise
2468 then 1357 Fade
2468 then 1357 Snap
Bounce Fade 12345678765432
Bounce Snap 12345678765432
Top to Bottom 18,27,34,56,34,27
Side to Side 23,14,85,76
Outer Ring Macro Speed
No Function
Strobe (slow to fast)
Strobe Pulse (slow to fast)
Random Strobe All (slow to fast)
Random 1-8 Strobe (slow to fast)
Inner Red LED intensity
Inner Green LED Intensity
Inner Blue LED Intensity
No Function
Fade Clockwise
Fade Counter Clockwise
Snap Clockwise
Snap Counter Clockwise
2468 then 1357 Fade
2468 then 1357 Snap
Bounce Fade 12345678765432
Bounce Snap 12345678765432
Top to Bottom 18,27,34,56,34,27
Side to Side 23,14,85,76
Inner Ring Macro Speed
No Function
Strobe (slow to fast)
Strobe Pulse (slow to fast)
Random Strobe All (slow to fast)
Random 1-8 Strobe (slow to fast)
Center Warm White
Center Amber
Center Reflective Warm White
No Function
Strobe (slow to fast)
Strobe Pulse (slow to fast)
Random Strobe All (slow to fast)
Random Strobe 1-3 (slow to fast)
10
Value
0-255
0-255
0-255
0-255
0-1
2-24
25-49
50-74
75-99
100-124
125-149
150-174
175-199
200-224
225-255
0-255
0-1
1-127
128-170
171-213
214-255
0-255
0-255
0-255
0-1
2-24
25-49
50-74
75-99
100-124
125-149
150-174
175-199
200-224
225-255
0-255
0-1
2-127
128-170
171-213
214-255
0-255
0-255
0-255
0-1
2-127
128-170
171-213
214-255
0
Init
255
255
255
255
0
0
255
255
255
0
0
0
255
255
255
0
25
26
27
40
41
42
43
36
37
38
39
32
33
34
35
28
29
30
31
48
49
50
51
52
44
45
46
47
Circa XL Scoop LED 52 Ch Mode
DMX Channel
1
2
3
4
5
6
7
12
13
14
15
8
9
10
11
20
21
22
23
24
16
17
18
19
Function
Dimmer
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
Description
Master Dimmer Off to Full
Outer 1 Red LED intensity
Outer 1 Green LED intensity
Outer 1 Blue LED intensity
Outer 2 Red LED intensity
Outer 2 Green LED intensity
Outer 2 Blue LED intensity
Outer 3 Red LED intensity
Outer 3 Green LED intensity
Outer 3 Blue LED intensity
Outer 4 Red LED intensity
Outer 4 Green LED intensity
Outer 4 Blue LED intensity
Outer 5 Red LED intensity
Outer 5 Green LED intensity
Outer 5 Blue LED intensity
Outer 6 Red LED intensity
Outer 6 Green LED intensity
Outer 6 Blue LED intensity
Outer 7 Red LED intensity
Outer 7 Green LED intensity
Outer 7 Blue LED intensity
Outer 8 Red LED intensity
Outer 8 Green LED intensity
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
Outer 8 Blue LED intensity
Inner 1 Red LED intensity
Inner 1 Green LED intensity
Inner 1 Blue LED intensity
Inner 2 Red LED intensity
Inner 2 Green LED intensity
Inner 2 Blue LED intensity
Inner 3 Red LED intensity
Inner 3 Green LED intensity
Inner 3 Blue LED intensity
Inner 4 Red LED intensity
Inner 4 Green LED intensity
Inner 4 Blue LED intensity
Inner 5 Red LED intensity
Inner 5 Green LED intensity
Inner 5 Blue LED intensity
Inner 6 Red LED intensity
Inner 6 Green LED intensity
Inner 6 Blue LED intensity
Inner 7 Red LED intensity
Inner 7 Green LED intensity
Inner 7 Blue LED intensity
Inner 8 Red LED intensity
Inner 8 Green LED intensity
Inner 8 Blue LED intensity
Center Warm White
Center Amber
Reflective Warm White
11
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
Value
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0
0
0
0
0
0
0
0
0
0
0
0
Init
255
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
26
34
35
36
37
38
39
40
27
28
29
30
31
32
33
45
46
47
48
41
42
43
44
49
50
Circa XL Scoop LED 55 Ch Mode
DMX Channel Function Description
13
14
15
16
9
10
11
12
5
6
7
8
1
2
3
4
21
22
23
24
25
17
18
19
20
Dimmer
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
51
52
53
54
55
Outer Strobe
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
LED Color
Inner Strobe
LED Color
LED Color
LED Color
Center Strobe
Master Dimmer Off to Full
Outer 1 Red LED intensity
Outer 1 Green LED intensity
Outer 1 Blue LED intensity
Outer 2 Red LED intensity
Outer 2 Green LED intensity
Outer 2 Blue LED intensity
Outer 3 Red LED intensity
Outer 3 Green LED intensity
Outer 3 Blue LED intensity
Outer 4 Red LED intensity
Outer 4 Green LED intensity
Outer 4 Blue LED intensity
Outer 5 Red LED intensity
Outer 5 Green LED intensity
Outer 5 Blue LED intensity
Outer 6 Red LED intensity
Outer 6 Green LED intensity
Outer 6 Blue LED intensity
Outer 7 Red LED intensity
Outer 7 Green LED intensity
Outer 7 Blue LED intensity
Outer 8 Red LED intensity
Outer 8 Green LED intensity
Outer 8 Blue LED intensity
No Function
Strobe (slow to fast)
Strobe Pulse (slow to fast)
Random Strobe All (slow to fast)
Random Strobe 1-3 (slow to fast)
Inner 1 Red LED intensity
Inner 1 Green LED intensity
Inner 1 Blue LED intensity
Inner 2 Red LED intensity
Inner 2 Green LED intensity
Inner 2 Blue LED intensity
Inner 3 Red LED intensity
Inner 3 Green LED intensity
Inner 3 Blue LED intensity
Inner 4 Red LED intensity
Inner 4 Green LED intensity
Inner 4 Blue LED intensity
Inner 5 Red LED intensity
Inner 5 Green LED intensity
Inner 5 Blue LED intensity
Inner 6 Red LED intensity
Inner 6 Green LED intensity
Inner 6 Blue LED intensity
Inner 7 Red LED intensity
Inner 7 Green LED intensity
Inner 7 Blue LED intensity
Inner 8 Red LED intensity
Inner 8 Green LED intensity
Inner 8 Blue LED intensity
No Function
Strobe (slow to fast)
Strobe Pulse (slow to fast)
Random Strobe All (slow to fast)
Random Strobe 1-8 (slow to fast)
Center Warm White
Center Amber
Reflective Warm White
No Function
Strobe (slow to fast)
Strobe Pulse (slow to fast)
Random Strobe All (slow to fast)
Random Strobe 1-3 (slow to fast)
12
0-255
0-255
0-255
0-255
0-255
0-255
0-1
2-127
128-170
171-213
214-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-1
2-127
128-170
171-213
214-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-1
2-127
128-170
171-213
214-255
Value
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Init
255
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Cleaning and Maintenance
Installation Maintenance:
The operator has to make sure that the unit is operating safely and has the installations and electronics checked by an expert every 2 years.
The following points have to be considered during the inspection:
1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.
2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).
3) Mechanically moved parts like axles and other must not show any traces of wearing and must not rotate with unbalances.
4) The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation!
Caution Danger to life!
We recommend a frequent cleaning of the device. Please use a moist, lint free cloth. Never use alcohol or solvents!
1) The objective lens will require periodic cleaning on usage and environment. Environment with foggers will require more periodic cleaning as fog fluid tends to build up residues, reducing the light output.
2) The cooling-fans should be cleaned monthly. DO NOT blow high pressure air into fans as incorrect rotation can damage the fans operation.
3) The gobos, dichroic color filters and internal lenses may be cleaned with soft brush using soapy water.
4) The interior of the fixture should be cleaned using a vacuum.
5) We recommend proper lubrication of the motor wheel. The quantity of the oil must not be excessive in order to avoid oil run outs when motor wheel rotate
Note:
There is no serviceable parts inside the device except for the fuse. Maintenance and service operations are to be carried out by authorized dealers.
Replacing the fuse:
Only replace the fuse with the same type and rating.
Replacing the power cable:
If the power cable of this device becomes damaged, it has to be replaced by authorized dealers only
Should you have further questions , please contact your dealer.
Parts List
5201-LED-MOD-O
5201-LED-MOD-I
LED Module Outer Ring (half)
LED Module Inner (segment)
5201-LED-MOD-C
5201-LED-MOD-R
LED Module Center
LED Module Reflective Ring (half)
5201-LED-MOD-RC LED Module Reflective Center (1/3)
5201-POW
5201-PCB-DRI-A
5201-PCB-DRI-B
5201-PCB-MAI-DIS
Power Supply
PCB Driver A
PCB Driver B
Display and Main PCB
Accessories
5201-PCB-POW
5201-BEZ-RIN
5200-BEZ-CEN
5200-FAN-HW5
5200-FAN-X.W
5200-HOU-NET
5200-HOU-KNO
5200-KNO
5200-HOU-QUI
PCB for Power Distribution
Outer Ring Milky Diffusion Plastic
Center Globe Filter Plastic
HW5020B Fan
X.W-6010M24B Fan
Housing Net
Housing base for Knob
Knob
Quick Release Clamp Mount
5201-ACC-BAS
5201-ACC-SMO
CAS-5201-2
Removable Floor Base
Smoke Ring Filter
2 Unit Road Case
13
Warranty Information
Warranty Conditions
-
Unless otherwise stated in writing, your product is covered by a one year parts and labor limited warranty.
-
LED’s or Lamp’s are not guaranteed to match in color temperature or output.
-
It is the owner’s responsibility to furnish receipts or invoices for verification of purchase, date, and reseller or distributor.
If purchase date cannot be provided, date of manufacture will be used to determine warranty period.
-
Goods returned under warranty must follow the proper authorization procedure and must be accompanied by a copy of the original invoice.
-
Goods repaired under warranty will be returned to the owner with the freight prepaid by MSI via the most economical means of shipment.
-
Repair or replacement as provided for under this warranty is the exclusive remedy of the consumer. MEGA SYSTEMS
INC. makes no warranties, express or implied, with respect to any product, and Mega Systems specifically disclaims any warranty of merchantability or fitness for a particular purpose. Mega Systems shall not be liable for any indirect, incidental or consequential damage, including lost profit, sustained or incurred in connection with any product or caused by product defect or the partial or total failure of any product regardless of the form of action, weather in contract, tort
(including negligence), strict liability or otherwise, and weather or not such damage was foreseen or unforeseen.
-
Warranty is void if the product is misused, damaged, modified in any way, or for unauthorized repairs or parts. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Customer Support
Mega Lite has a customer support line to provide set up help and to answer any question should you encounter a problem. Please visit our website for any other related technical documents. For service related issue please contact our service dept.
Monday—Friday 9am to 6pm CST
Voice: 210-684-2600
E-mail: [email protected]
Specifications in this manual are subject to change.
Mega-Lite
18668 Highway 16N
Helotes, TX 78023
Ph 210-684-2600 Fax 210-855-6279 www.mega.lighting / [email protected]
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
