Mazda Demio Owner's Manual

PDF

Document

Mazda2_8CL7-EA-12H_Edition1 Page1

Monday, June 18 2012 1:48 PM

Black plate (1,1)

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page2

Monday, June 18 2012 1:48 PM

Black plate (2,1)

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page3

Monday, June 18 2012 1:48 PM

Black plate (3,1)

A Word to Mazda Owners

Thank you for choosing a Mazda. We at Mazda design and build vehicles with complete customer satisfaction in mind.

To help ensure enjoyable and trouble-free operation of your Mazda, read this manual carefully and follow its recommendations.

An Authorized Mazda Dealer knows your vehicle best. So when maintenance or service is necessary, that's the place to go.

Our nationwide network of Mazda professionals is dedicated to providing you with the best possible service.

We assure you that all of us at Mazda have an ongoing interest in your motoring pleasure and in your full satisfaction with your Mazda product.

Mazda Motor Corporation

Important Notes About This Manual

Keep this manual in the glove box as a handy reference for the safe and enjoyable use of your Mazda. Should you resell the vehicle, leave this manual with it for the next owner.

All specifications and descriptions are accurate at the time of printing. Because improvement is a constant goal at

Mazda, we reserve the right to make changes in specifications at any time without notice and without obligation.

Air Conditioning and the Environment

Your Mazda's genuine air conditioner is filled with HFC134a (R134a), a refrigerant that has been found not to damage the earth's ozone layer. If the air conditioner does not operate properly, consult an Authorized Mazda

Dealer.

Perchlorate

Certain components of this vehicle such as [air bag modules, seat belt pretensioners, lithium batteries, ...] may contain Perchlorate Material

–

Special handling may apply for service or vehicle end of life disposal. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Please be aware that this manual applies to all models, equipment and options. As a result, you may find some explanations for equipment not installed on your vehicle.

Printed in Japan July 2012 (Print1)

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page4

Monday, June 18 2012 1:48 PM

Black plate (4,1)

How to Use This Manual

We want to help you get the most driving pleasure from your vehicle. Your owner's manual, when read from cover to cover, can do that in many ways.

Illustrations complement the words of the manual to best explain how to enjoy your

Mazda. By reading your manual, you can find out about the features, important safety information, and driving under various road conditions.

The symbol below in this manual means

“

Do not do this

” or

“

Do not let this happen

”

NOTE

A NOTE provides information and sometimes suggests how to make better use of your vehicle.

The symbol below, located on some parts of the vehicle, indicates that this manual contains information related to the part.

Please refer to the manual for a detailed explanation.

Index:

A good place to start is the Index, an alphabetical listing of all information in your manual.

You'll find several WARNINGs,

CAUTIONs, and NOTEs in the manual.

WARNING

A WARNING indicates a situation in which serious injury or death could result if the warning is ignored.

CAUTION

A CAUTION indicates a situation in which bodily injury or damage to your vehicle, or both, could result if the caution is ignored.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page5

Monday, June 18 2012 1:48 PM

Black plate (5,1)

Table of Contents

Your Vehicle at a Glance

Interior, exterior views and part identification of your Mazda.

Driving Your Mazda

Explanation of instruments and controls.

1

Essential Safety Equipment

Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags.

Knowing Your Mazda

Explanation of basic operations and controls; opening/closing and adjustment of various parts.

Before Driving Your Mazda

Important information about driving your Mazda.

2

3

4

5

Interior Comfort

Use of various features for drive comfort, including air-conditioning and audio system.

In Case of an Emergency

Helpful information on what to do in an emergency.

6

7

Maintenance and Care

How to keep your Mazda in top condition.

8

Customer Information and Reporting Safety Defects

Important consumer information including warranties and add-on equipment.

Specifications

Technical information about your Mazda.

Index

9

10

11

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page6

Monday, June 18 2012 1:48 PM

Black plate (6,1)

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page7

Monday, June 18 2012 1:48 PM

Black plate (7,1)

Your Vehicle at a Glance

Interior, exterior views and part identification of your Mazda.

Interior Overview .......................................................................... 1-2

Interior Equipment (View A) .................................................... 1-2

Interior Equipment (View B) .................................................... 1-3

Interior Equipment (View C) .................................................... 1-4

Exterior Overview ......................................................................... 1-5

Front .......................................................................................... 1-5

Rear ........................................................................................... 1-6

Downloaded from

Form No.8CL7-EA-12H

1-1

Mazda2_8CL7-EA-12H_Edition1 Page8

Monday, June 18 2012 1:48 PM

Your Vehicle at a Glance

Interior Overview

Interior Equipment (View A)

Black plate (8,1)

Door-lock knob .................................................................................................... page 3-8

DSC OFF switch ............................................................................................... page 5-22

Lighting control ................................................................................................. page 5-50

Turn and lane-change signals ............................................................................ page 5-53

Instrument cluster .............................................................................................. page 5-29

Wiper and washer lever ..................................................................................... page 5-54

Ignition switch ..................................................................................................... page 5-2

Tilt wheel release lever ...................................................................................... page 3-25

Outside mirror switch ........................................................................................ page 3-25

Power window switches .................................................................................... page 3-15

Power window lock switch ................................................................................ page 3-17

1-2

The equipment and installation position varies by vehicle

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page9

Monday, June 18 2012 1:48 PM

Black plate (9,1)

Your Vehicle at a Glance

Interior Overview

Interior Equipment (View B)

Audio control switches ...................................................................................... page 6-37

SRS air bags ...................................................................................................... page 2-36

Cruise control switches ...................................................................................... page 5-16

Rear window defroster switch ........................................................................... page 5-58

Hazard warning flasher switch .......................................................................... page 5-59

Climate control system ........................................................................................ page 6-2

Audio system ..................................................................................................... page 6-10

MT shift lever .................................................................................................... page 5-10

AT shift lever ...................................................................................................... page 5-12

Hood release handle .......................................................................................... page 3-19

Downloaded from

Form No.8CL7-EA-12H

The equipment and installation position varies by vehicle

1-3

Mazda2_8CL7-EA-12H_Edition1 Page10

Monday, June 18 2012 1:48 PM

Your Vehicle at a Glance

Interior Overview

Interior Equipment (View C)

Black plate (10,1)

SRS air bag ........................................................................................................ page 2-36

Seat belt ............................................................................................................... page 2-9

Remote fuel-filler lid release ............................................................................. page 3-18

Bottle holder ...................................................................................................... page 6-52

Vanity mirror ...................................................................................................... page 6-50

Overhead light ................................................................................................... page 6-50

Rearview mirror ................................................................................................. page 3-26

Sunvisor ............................................................................................................. page 6-50

Front seat ............................................................................................................. page 2-2

Power door lock switch ....................................................................................... page 3-8

Cup holders ........................................................................................................ page 6-51

Parking brake ....................................................................................................... page 5-6

Rear seat .............................................................................................................. page 2-4

1-4

The equipment and installation position varies by vehicle

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page11

Monday, June 18 2012 1:48 PM

Front

Black plate (11,1)

Your Vehicle at a Glance

Exterior Overview

Hood .................................................................................................................. page 3-19

Windshield wiper blades .................................................................................... page 8-20

Door lock ............................................................................................................. page 3-7

Fuel-filler lid ...................................................................................................... page 3-18

Tires ................................................................................................................... page 8-27

Light bulbs ......................................................................................................... page 8-32

Downloaded from

Form No.8CL7-EA-12H

The equipment and installation position varies by vehicle

1-5

Mazda2_8CL7-EA-12H_Edition1 Page12

Monday, June 18 2012 1:48 PM

Your Vehicle at a Glance

Exterior Overview

Rear

Black plate (12,1)

Rear wiper blade ................................................................................................ page 8-22

Liftgate .............................................................................................................. page 3-10

Antenna ............................................................................................................... page 6-9

Child safety lock ................................................................................................ page 3-10

Outside mirror .................................................................................................... page 3-25

Tires ................................................................................................................... page 8-27

Light bulbs ......................................................................................................... page 8-32

1-6

The equipment and installation position varies by vehicle

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page13

Monday, June 18 2012 1:48 PM

Black plate (13,1)

Essential Safety Equipment

Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags.

Seats ............................................................................................... 2-2

Front Seats ................................................................................ 2-2

Rear Seat ................................................................................... 2-4

Head Restraints ......................................................................... 2-7

Seat Belt Systems .......................................................................... 2-9

Seat Belt Precautions ................................................................ 2-9

Seat Belt .................................................................................. 2-13

Front Seat Belt Pretensioner and Load Limiting Systems ....... 2-15

Seat Belt Extender ................................................................... 2-17

Seat Belt Warning Light .......................................................... 2-19

Seat Belt Reminder ................................................................. 2-19

Child Restraint ............................................................................ 2-21

Child Restraint Precautions ..................................................... 2-21

Child-Restraint System Installation Position .......................... 2-25

Installing Child-Restraint Systems .......................................... 2-26

LATCH Child-Restraint Systems ............................................ 2-32

SRS Air Bags ............................................................................... 2-36

Supplemental Restraint System (SRS) Precautions ................ 2-36

Supplemental Restraint System Components ......................... 2-41

How the SRS Air Bags Work .................................................. 2-42

SRS Air Bag Deployment Criteria .......................................... 2-47

Limitations to SRS Air Bag .................................................... 2-48

Driver and Front Passenger Occupant Classification

System ..................................................................................... 2-50

Monitoring and Maintenance .................................................. 2-55

2-1

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page14

Monday, June 18 2012 1:48 PM

Black plate (14,1)

Essential Safety Equipment

Seats

Front Seats

WARNING

Do not modify or replace the front seats:

Modifying or replacing the front seats such as replacing the upholstery or loosening any bolts is dangerous. The front seats contain air bag components essential to the supplemental restraint system. Such modifications could damage the supplemental restraint system and result in serious injury. Consult an

Authorized Mazda Dealer if there is any need to remove or reinstall the front seats.

Do not drive with damaged front seats:

Driving with damaged front seats is dangerous. A collision, even one not strong enough to inflate the air bags, could damage the front seats which contain essential air bag components. If there was a subsequent collision, an air bag may not deploy which could lead to injuries. Always have an Authorized

Mazda Dealer inspect the front seats, front seat belt pretensioners and air bags after a collision.

Make sure the adjustable components of a seat are locked in place:

Adjustable seats and seatbacks that are not securely locked are dangerous. In a sudden stop or collision, the seat or seatback could move, causing injury. Make sure the adjustable components of the seat are locked in place by attempting to slide the seat forward and backward and rocking the seatback.

Adjust the driver's seat only when the vehicle is stopped:

Adjusting the driver's seat while the vehicle is moving is dangerous. The driver could lose control of the vehicle and have an accident.

CAUTION

Be careful not to place your hands and fingers around moving parts of the front seat when adjusting the seat positions to prevent injury.

Seat Slide

To move a seat forward or backward, raise the lever and slide the seat to the desired position and release the lever.

Make sure the lever returns to its original position and the seat is locked in place by attempting to push it forward and backward.

2-2

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page15

Monday, June 18 2012 1:48 PM

Black plate (15,1)

Essential Safety Equipment

Seats q

Seat Recline

WARNING

Do not drive with either front seat reclined:

Sitting in a reclined position while the vehicle is moving is dangerous because you do not get the full protection from seat belts. During sudden braking or a collision, you can slide under the lap belt and suffer serious internal injuries. For maximum protection, sit well back and upright.

Always sit in the front passenger seat properly with the seatback upright and feet on the floor:

Your front passenger seat has weight sensors, sitting in the front passenger seat improperly out of position or with the seatback reclined too far while the vehicle is moving is dangerous as it can take off weight from the seat bottom and affect the weight determination of the front passenger sensing system. As a result the front passenger will not have the supplementary protection of the air bag and seat belt pretensioner, which could result in serious injury. Always sit upright against the seatback with your feet on the floor.

Do not drive with the seatback unlocked:

All of the seatbacks play an important role in your protection in a vehicle. Leaving the seatback unlocked is dangerous as it can allow passengers to be ejected or thrown around and baggage to strike occupants in a sudden stop or collision, resulting in severe injury.

After adjusting the seatback at any time, even when there are no other passengers, rock the seatback to make sure it is locked in place.

To change the seatback angle, lean forward slightly while raising the lever.

Then lean back to the desired position and release the lever.

Make sure the lever returns to its original position and the seatback is locked in place by attempting to push it forward and backward.

2-3

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page16

Monday, June 18 2012 1:48 PM

Black plate (16,1)

Essential Safety Equipment

Seats

CAUTION

When returning a rear-reclined seatback to its upright position, make sure you hold onto the seatback with your other hand while operating the lever. If the seatback is not supported, it will flip forward suddenly and could cause injury.

Height Adjustment (Driver's Seat)

To adjust the seat height, move the lever up or down.

Down

Rear Seat

WARNING

Do not stack cargo higher than the seatbacks or place articles on the rear package tray:

Stacking luggage or other cargo higher than the seatbacks, and placing articles on the rear package tray is dangerous. During sudden braking or a collision, objects can fly around and become projectiles that may hit and injure passengers.

Make sure luggage and cargo are secured before driving:

Not securing cargo while driving is dangerous as it could move or be crushed during sudden braking or a collision and cause injury.

Make sure the adjustable components of a seat are locked in place:

Adjustable seats that are not securely locked are dangerous. In a sudden stop or collision, the seat or seatback could move, causing injury.

Do not drive with the seatback unlocked:

After returning the seatback at any time, even when there are no other passengers, rock the seatback to make sure it is locked in place.

2-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page17

Monday, June 18 2012 1:48 PM

Black plate (17,1)

Never allow a passenger to sit or stand on the folded seatback while the vehicle is moving:

Driving with a passenger on the folded seatback is dangerous.

Allowing a child to sit up on the folded seatback while the vehicle is moving is particularly dangerous. In a sudden stop or even a minor collision, a child not in a proper seat or child-restraint system and seat belt could be thrown forward, back or even out of the vehicle resulting in serious injuries or death. The child in the baggage area could be thrown into other occupants and cause serious injury.

CAUTION

Be careful not to place your hands and fingers around moving parts of the rear seat when adjusting the seat positions to prevent injury.

NOTE

When returning a rear seat to its original position, also replace the seat belt to its normal position. Verify that the seat belt pulls out and retracts.

Essential Safety Equipment

Seats q

Split-Folding Rear Seatback

The seatbacks can be folded down to provide more space in the luggage compartment.

To fold the seatbacks

CAUTION

When operating the rear seatback knob, make sure you support the seatback with your hand. If the seatback is not supported with your hand, it will flip forward suddenly and could cause injury to the finger that pushes the rear seatback knob down.

1. Lower the head restraint all the way down (page 2-7).

2. Support the seatback with your hand.

3. Push the rear seatback knob down.

2-5

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page18

Monday, June 18 2012 1:48 PM

Black plate (18,1)

Essential Safety Equipment

Seats

4. Secure the rear seat belt in the belt clip.

Belt clip

To return the seatbacks to the upright position

WARNING

Always make sure the seat belts are fully pulled out from under the seatbacks:

A seat belt caught under a seatback after the seatback is returned to its upright position is dangerous. In a collision or sudden stop, the seat belt cannot provide adequate protection.

When returning the seatback to the upright position, make sure there is no red indication:

A rear seatback not fully returned and locked in the upright position is dangerous. Sudden stops or maneuvering could cause a seatback to flip forward suddenly resulting in injury. If the red indicator is visible on the back of the rear seatback knob, the seatback is not locked in the upright position.

Locked position

Unlocked position

Red indicator

2-6

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page19

Monday, June 18 2012 1:48 PM

Black plate (19,1)

Essential Safety Equipment

Seats

1. Verify that the seat belt is secured in the belt clip.

Belt clip

2. Lift the seatbacks upright.

3. Make sure that the seat belt is neither stuck in the rear seat nor twisted, then remove the seat belt from the belt clip.

Head Restraints

Your vehicle is equipped with head restraints on all outboard seats. The head restraints are intended to help protect you and the passengers from neck injury.

WARNING

Always drive with the head restraints installed when seats are being used and make sure they are properly adjusted. In addition, always raise the head restraints mentioned below when they are being used:

Driving with the head restraints adjusted too low or removed is dangerous. With no support behind your head, your neck could be seriously injured in a collision.

(Head restraints which must be raised for use)

Rear outboard head restraints

2-7

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page20

Monday, June 18 2012 1:48 PM

Essential Safety Equipment

Seats

Height adjustment

To raise a head restraint, pull it up to the desired position.

To lower the head restraint, press the stopcatch release, then push the head restraint down.

Adjust the head restraint so that the center is even with the top of the passenger's ears.

Rear outboard seat

Black plate (20,1)

Front outboard seat

Removal/Installation

To remove the head restraint, pull it up while pressing the stop-catch.

To install the head restraint, press the uprights into the holes while pressing the stop-catch.

WARNING

Always drive with the head restraints set up when seats are being used and make sure they are properly set up:

Driving with the head restraints not set up is dangerous. With no support behind your head, your neck could be seriously injured in a collision.

2-8

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page21

Monday, June 18 2012 1:48 PM

Black plate (21,1)

Essential Safety Equipment

Seat Belt Systems

Seat Belt Precautions

Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and all passengers always wear seat belts.

All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use.

The driver's seat belt has no provisions for child-restraint systems and has only an emergency locking mode. The driver may wear it comfortably, and it will lock during a collision.

However, the front passenger's seat and all rear lap/shoulder belt retractors operate in two modes: emergency locking mode, and for child-restraint systems, automatic locking mode.

While we recommend you put all children in the rear seats, if you must use the front passenger seat for a child, slide the front passenger seat as far back as possible and make sure any child-restraint system is secured properly.

Downloaded from

Form No.8CL7-EA-12H

2-9

Mazda2_8CL7-EA-12H_Edition1 Page22

Monday, June 18 2012 1:48 PM

Black plate (22,1)

Essential Safety Equipment

Seat Belt Systems

WARNING

Always wear your seat belt and make sure all occupants are properly restrained:

Not wearing a seat belt is extremely dangerous. During a collision, occupants not wearing seat belts could hit someone or things inside the vehicle or even be thrown out of the vehicle. They could be seriously injured or even killed. In the same collision, occupants wearing seat belts would be much safer.

Do not wear twisted seat belts:

Twisted seat belts are dangerous. In a collision, the full width of the belt is not available to absorb the impact. This puts more force on the bones beneath the belt, which could cause serious injury or death. So, if your seat belt is twisted, you must straighten the seat belt to remove any twists and to allow the full width of the belt to be used.

Never use one seat belt on more than one person at a time:

Using one seat belt for more than one person at a time is dangerous. A seat belt used in this way cannot spread the impact forces properly and the two passengers could be crushed together and seriously injured or even killed. Never use one belt for more than one person at a time and always operate the vehicle with each occupant properly restrained.

Do not operate a vehicle with a damaged seat belt:

Using a damaged seat belt is dangerous. An accident could damage the belt webbing of the seat belt in use. A damaged seat belt cannot provide adequate protection in a collision. Have an Authorized Mazda Dealer inspect all seat belt systems in use during an accident before they are used again.

Have your seat belts changed immediately if the pretensioner or load limiter has been expended:

Always have an Authorized Mazda Dealer immediately inspect the front seat belt pretensioners and air bags after any collision. Like the air bags, the front seat belt pretensioners and load limiters will only function once and must be replaced after any collision that caused them to deploy. A seat belt with an expended pretensioner or load limiter is still better than wearing no seat belt at all; however, if the front seat belt pretensioners and load limiters are not replaced, the risk of injury in a collision will increase.

2-10

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page23

Monday, June 18 2012 1:48 PM

Black plate (23,1)

Essential Safety Equipment

Seat Belt Systems

CAUTION

Belt retraction may become difficult if the belts and rings are soiled, so try to keep them clean. For more details about cleaning the seat belts, refer to

“

Cleaning the

Lap/Shoulder Belt Webbing

”

(page 8-52).

Pregnant Women and Persons with Serious Medical Conditions

Pregnant women should always wear seat belts. Ask your doctor for specific recommendations.

The lap belt should be worn SNUGLY AND AS LOW AS POSSIBLE OVER THE HIPS.

The shoulder belt should be worn across your shoulder properly, but never across the stomach area.

Persons with serious medical conditions also should wear seat belts. Check with your doctor for any special instructions regarding specific medical conditions.

Emergency Locking Mode

In the emergency locking mode, the belt remains comfortable on the occupant and the retractor will lock in position during a collision. When the seat belt is fastened, it will always be in the emergency locking mode until it is switched to automatic locking mode by pulling it all the way out to its full length. If the belt feels tight and hinders comfortable movement while the vehicle is stopped or in motion, it may be in the automatic locking mode because the belt has been pulled too far out. To return the belt to the more comfortable emergency locking mode, wait until the vehicle has stopped in a safe, level area, retract the belt fully to convert it back to emergency locking mode and then extend it around you again.

If the belt is locked and cannot be pulled out, retract the belt once, and then try pulling it out slowly. If this fails, pull the belt strongly one time and loosen, then pull it out again slowly.

2-11

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page24

Monday, June 18 2012 1:48 PM

Black plate (24,1)

Essential Safety Equipment

Seat Belt Systems q

Automatic Locking Mode

Always use the automatic locking mode to keep the child-restraint system from shifting to an unsafe position in the event of an accident. To enable seat belt automatic locking mode, pull it all the way out and connect it as instructed on the child-restraint system. It will retract down to the child-restraint system and stay locked on it. See the section on child restraint (page 2-21).

2-12

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page25

Monday, June 18 2012 1:48 PM

Black plate (25,1)

Seat Belt

Fastening the Seat Belt

1. Grasp the seat belt tongue.

2. Slowly pull out the lap/shoulder belt.

Lap/shoulder belt

Essential Safety Equipment

Seat Belt Systems

WARNING

Positioning the Shoulder Portion of the

Seat Belt:

Improper positioning of the shoulder portion of the seat belt is dangerous.

Always make sure the shoulder portion of the seat belt is positioned across your shoulder and near your neck, but never under your arm, on your neck, or on your upper arm.

4. Position the lap belt as low as possible, not on the abdominal area, then adjust the shoulder belt so that it fits snugly against your body.

Seat belt tongue

3. Insert the seat belt tongue into the seat belt buckle until you hear a click sound.

Keep low on hip bone

Take up slack

Too high

Seat belt tongue

Seat belt buckle

WARNING

Positioning the Lap Portion of the Seat

Belt:

The lap portion of the seat belt worn too high is dangerous. In a collision, this would concentrate the impact force directly on the abdominal area, causing serious injury. Wear the lap portion of the belt snugly and as low as possible.

2-13

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page26

Monday, June 18 2012 1:48 PM

Black plate (26,1)

Essential Safety Equipment

Seat Belt Systems q

Unfastening the Seat Belt

Depress the button on the seat belt buckle.

If the belt does not fully retract, pull it out and check for kinks or twists. Then make sure it remains untwisted as it retracts.

Shoulder Belt Adjuster

Adjust the height of the shoulder belt if the seat belt touches your neck, or if it crosses your arm instead of your shoulder.

To raise the shoulder belt adjuster, push the adjuster up. To lower the shoulder belt adjuster, pull the adjuster and slide it down. Make sure the adjuster is locked.

To raise To lower

Button

NOTE

If a belt does not fully retract, inspect it for kinks and twists. If it is still not retracting properly, have it inspected at an Authorized

Mazda Dealer.

WARNING

Positioning the Shoulder Portion of the

Seat Belt:

Improper positioning of the shoulder portion of the seat belt is dangerous.

Always make sure the shoulder portion of the seat belt is positioned across your shoulder and near your neck, but never under your arm, on your neck, or on your upper arm.

2-14

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page27

Monday, June 18 2012 1:48 PM

Black plate (27,1)

Essential Safety Equipment

Seat Belt Systems

Front Seat Belt Pretensioner and Load Limiting Systems

For optimum protection, the driver and front passenger seat belts are equipped with pretensioner and load limiting systems. For both these systems to work properly you must wear the seat belt properly.

Pretensioners:

In moderate or severe frontal or nearfrontal accidents, the front air bag and pretensioner systems deploy simultaneously. The front seat belt retractors remove slack quickly as the air bags are expanding. Any time the air bags and front seat belt pretensioners have deployed they must be replaced.

In addition, the pretensioner system for the front passenger, like the front passenger air bag, is designed to only deploy in accordance with the total seated weight on the front passenger seat.

For details, refer to the front passenger seat weight sensors (page 2-50).

Load limiter:

The load limiting system releases belt webbing in a controlled manner to reduce belt force on the occupant's chest. While the most severe load on a seat belt occurs in frontal collisions, the load limiter has an automatic mechanical function and can activate in any accident mode with sufficient occupant movement.

Even if the pretensioners have not deployed, the load limiting function must be checked by an Authorized Mazda

Dealer after any collision.

WARNING

Wear seat belts only as recommended in this owner's manual:

Incorrect positioning of the driver and front passenger seat belts is dangerous. Without proper positioning, the pretensioner and load limiting systems cannot provide adequate protection in an accident and this could result in serious injury.

For more details about wearing seat belts, refer to

“

Fastening the seat belts

”

(page 2-13).

Have your seat belts changed immediately if the pretensioner or load limiter has been expended:

Always have an Authorized Mazda

Dealer immediately inspect the front seat belt pretensioners and air bags after any collision. Like the air bags, the front seat belt pretensioners and load limiters will only function once and must be replaced after any collision that caused them to deploy.

A seat belt with an expended pretensioner or load limiter is still better than wearing no seat belt at all; however, if the front seat belt pretensioners and load limiters are not replaced, the risk of injury in a collision will increase.

2-15

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page28

Monday, June 18 2012 1:48 PM

Black plate (28,1)

Essential Safety Equipment

Seat Belt Systems

Do not modify the components or wiring, or use electronic testing devices on the pretensioner system:

Modifying the components or wiring of the pretensioner system, including the use of electronic testing devices is dangerous. You could accidentally activate it or make it inoperable which would prevent it from activating in an accident. The occupants or repairers could be seriously injured.

Properly dispose of the pretensioner system:

Improper disposal of the pretensioner system or a vehicle with nondeactivated pretensioners is dangerous. Unless all safety procedures are followed, injury could result. Ask an Authorized Mazda

Dealer how to safely dispose of the pretensioner system or how to scrap a pretensioner-equipped vehicle.

NOTE l

The pretensioner system will activate in a moderate or greater frontal or near-frontal collision. It will not activate in most rollovers, side or rear impacts.

In addition, the pretensioner system for the front passenger is designed to only deploy in accordance with the total seated weight on the front passenger seat.

Some smoke (non-toxic gas) will be released when the air bags and pretensioners deploy. This does not indicate a fire. This gas normally has no effect on occupants, however, those with sensitive skin may experience light skin irritation. If residue from the deployment of the air bags or the front pretensioner system gets on the skin or in the eyes, wash it off as soon as possible.

2-16 q

Air Bag/Front Seat Belt

Pretensioner System Warning Light

If the air bag/front seat belt pretensioner system is working properly, the warning light illuminates when the ignition is switched ON or after the engine is cranked. The warning light turns off after a specified period of time.

A system malfunction is indicated if the warning light constantly flashes, constantly illuminates or does not illuminate at all when the ignition is switched ON. If any of these occur, consult an Authorized Mazda Dealer as soon as possible. The system may not operate in an accident.

WARNING

Never tamper with the air bag/ pretensioner systems and always have an Authorized Mazda Dealer perform all servicing and repairs:

Self-servicing or tampering with the systems is dangerous. An air bag/ pretensioner could accidentally activate or become disabled causing serious injury or death.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page29

Monday, June 18 2012 1:48 PM

Black plate (29,1)

Essential Safety Equipment

Seat Belt Systems q

Air Bag/Front Seat Belt

Pretensioner System Warning Beep

If a malfunction is detected in the air bag/ front seat belt pretensioner systems and the warning light, a warning beep sound will be heard for about 5 seconds every minute.

The air bag and seat belt pretensioner system warning beep sound will continue to be heard for approximately 35 minutes.

Have your vehicle inspected at an

Authorized Mazda Dealer as soon as possible.

WARNING

Do not drive the vehicle with the air bag/front seat belt pretensioner system warning beep sounding:

Driving the vehicle with the air bag/ front seat belt pretensioner system warning beep sounding is dangerous.

In a collision, the air bags and the front seat belt pretensioner system will not deploy and this could result in death or serious injury.

Contact an Authorized Mazda Dealer to have the vehicle inspected as soon as possible.

Seat Belt Extender

If your seat belt is not long enough, even when fully extended, a seat belt extender may be available to you at no charge from your Authorized Mazda Dealer.

This extender will be only for you and for the particular vehicle and seat. Even if it plugs into other seat belts, it may not hold in the critical moment of a crash.

When ordering an extender, only order one that provides the necessary additional length to fasten the seat belt properly.

Please contact your Authorized Mazda

Dealer for more information.

WARNING

Do not use a seat belt extender unless it is necessary:

Using a seat belt extender when not necessary is dangerous. The seat belt will be too long and not fit properly.

In an accident, the seat belt will not provide adequate protection and you could be seriously injured. Only use the extender when it is required to fasten the seat belt properly.

2-17

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page30

Monday, June 18 2012 1:48 PM

Black plate (30,1)

Essential Safety Equipment

Seat Belt Systems

Do not use an improper extender:

Using a seat belt extender that is for another person or a different vehicle or seat is dangerous. The seat belt will not provide adequate protection and the user could be seriously injured in an accident. Only use the extender provided for you and for the particular vehicle and seat. NEVER use the extender in a different vehicle or seat. If you sell your Mazda, do not leave your seat belt extender in the vehicle. It could be used accidentally by the new owner of the vehicle. After removing the seat belt extender, discard it. Never use the seat belt extender in any other vehicle you may own in the future.

Do not use an extender that is too long:

Using an extender that is too long is dangerous. The seat belt will not fit properly. In an accident, the seat belt will not provide adequate protection and you could be seriously injured.

Do not use the extender or choose one shorter in length if the distance between the extender's buckle and the center of the user's body is less than 15 cm (6 in).

Do not leave a seat belt extender connected to the buckle:

Leaving a seat belt extender connected to the buckle without using the seat belt is dangerous.

When the seat belt extender is connected to the driver's seat belt buckle (or front passenger) seat, the

SRS driver's (or front passenger's) air bag system will determine that the driver (or front passenger) is wearing the seat belt even if the driver (or front passenger) is not wearing it.

This condition could cause the driver's (or front passenger's) air bag to not activate correctly and result in death or serious injury in the event of collision. Always wear the seat belt with the seat belt extender.

Do not use the seat belt extender when installing a child-restraint system on the front or rear passenger seat:

Using a seat belt extender to fasten a child-restraint system on any seat is dangerous. Always follow the childrestraint system manufacturer's installation instructions and never use a seat belt extender.

NOTE

When not in use, remove the seat belt extender and store it in the vehicle. If the seat belt extender is left connected, the seat belt extender might get damaged as it will not retract with the rest of the seat belt and can easily fall out of the door when not in use and be damaged. In addition, the seat belt warning light will not illuminate and function properly.

2-18

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page31

Monday, June 18 2012 1:48 PM

Black plate (31,1)

Seat Belt Warning Light

Driver's seat

Front passenger's seat

The seat belt warning light illuminates if the driver or front passenger's seat is occupied and the seat belt is not fastened when the ignition switched ON.

Essential Safety Equipment

Seat Belt Systems

Seat Belt Reminder

NOTE

Consult an Authorized Mazda Dealer to deactivate or restore the belt reminder. Though the belt reminder can be deactivated, doing so will defeat the purpose of the system to warn the driver and the front passenger in the event that their seat belts are not fastened. For the safety of the driver and front passenger, Mazda recommends not deactivating the belt reminder.

If the vehicle is driven with the driver or front passenger's seat belt unfastened, the seat belt warning light illuminates and a warning chime sounds.

If the driver or front passenger's seat belt is unfastened (only when the front passenger seat is occupied) and the vehicle is driven at a speed faster than about 20 km/h (12 mph), the warning light will flash and a beep sound will be heard. After a short time, the warning light stops flashing, but remains illuminated, and the beep sound stops.

Until a seat belt is fastened or a given period of time has elapsed, the beep sound will not stop even if the vehicle speed falls below 20 km/h (12 mph).

2-19

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page32

Monday, June 18 2012 1:48 PM

Essential Safety Equipment

Seat Belt Systems

NOTE l l l

The warning light flashes and a beep sound will be heard for about 6 seconds if the driver's seat belt is not fastened when the ignition is switched ON.

If a driver or front passenger's seat belt is unfastened after the beep sound turns off

(warning light remains illuminated), and the vehicle speed exceeds 20 km/h (12 mph), the warning light flashes and beep sound activates again.

Placing items on the front passenger seat may cause the front passenger seat belt l l warning function to operate depending on the weight of the item.

To allow the front passenger seat weight sensor to function properly, do not place and sit on an additional seat cushion on the front passenger seat. The sensor may not function properly because the additional seat cushion could cause sensor interference.

When a small child sits on the front passenger seat, it is possible that the warning light will not operate.

Black plate (32,1)

2-20

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page33

Monday, June 18 2012 1:48 PM

Black plate (33,1)

Essential Safety Equipment

Child Restraint

Child Restraint Precautions

Mazda strongly urges the use of child-restraint systems for children small enough to use them.

You are required by law to use a child-restraint system for children in the U.S. and Canada.

Check your local and state or provincial laws for specific requirements regarding the safety of children riding in your vehicle.

Whatever child-restraint system you consider, please pick the appropriate one for the age and size of the child, obey the law and follow the instructions that come with the individual child-restraint system.

A child who has outgrown child-restraint systems should sit in the rear and use seat belts, both lap and shoulder. If the shoulder belt crosses the neck or face, move the child closer to the center of the vehicle in the outboard seats, and towards the buckle on the right if the child is seated on the center seat.

Statistics confirm that the rear seat is the best place for all children up to 12 years of age, and more so with a supplemental restraint system (air bags).

A rear-facing child-restraint system should NEVER be used on the front seat with the air bag system activated. The front passenger's seat is also the least preferred seat for other child-restraint systems.

To reduce the chance of injuries caused by deployment of the front passenger air bag, the front passenger seat weight sensors work as a part of the supplemental restraint system.

This system deactivates the front passenger front and side air bags and also the front passenger seat belt pretensioner system when the front passenger air bag deactivation indicator light illuminates.

When an infant or small child sits on the front passenger seat, the system shuts off the front passenger front and side air bags and seat belt pretensioner system, so make sure the front passenger air bag deactivation indicator light illuminates.

Even if the front passenger air bag is shut off, Mazda strongly recommends that children be properly restrained and child-restraint systems of all kinds are properly secured on the rear seats which are the best place for children.

For more details, refer to

“

Front passenger seat weight sensors

”

(page 2-50).

2-21

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page34

Monday, June 18 2012 1:48 PM

Black plate (34,1)

Essential Safety Equipment

Child Restraint

WARNING

Use the correct size child-restraint system:

For effective protection in vehicle accidents and sudden stops, a child must be properly restrained using a seat belt or child-restraint system depending on age and size. If not, the child could be seriously injured or even killed in an accident.

Follow the manufacturer's instructions and always keep the child-restraint system buckled down:

An unsecured child-restraint system is dangerous. In a sudden stop or a collision it could move causing serious injury or death to the child or other occupants. Make sure any child-restraint system is properly secured in place according to the childrestraint system manufacturer's instructions. When not in use, remove it from the vehicle or fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH child-restraint systems and the corresponding tether anchor.

Always secure a child in a proper child-restraint system:

Holding a child in your arms while the vehicle is moving is extremely dangerous. No matter how strong the person may be, he or she cannot hold onto a child in a sudden stop or collision and it could result in serious injury or death to the child or other occupants. Even in a moderate accident, the child may be exposed to air bag forces that could result in serious injury or death to the child, or the child may be slammed into an adult, causing injury to both child and adult.

Never use a rear-facing child-restraint system in the front seat with an air bag that could deploy:

Rear-facing child-restraint systems on the front seat are particularly dangerous even though you may feel assured that a front passenger air bag will not deploy based on the fact that the front passenger air bag deactivation indicator light illuminates. The child-restraint system can be hit by a deploying air bag and moved violently backward resulting in serious injury or death to the child.

2-22

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page35

Monday, June 18 2012 1:48 PM

Black plate (35,1)

Essential Safety Equipment

Child Restraint

Do not install a front-facing child-restraint system on the front passenger seat unless it is unavoidable:

In a collision, the force of a deploying air bag could cause serious injury or death to the child. If installing a front-facing child-restraint system on the front passenger seat is unavoidable, move the front passenger seat as far back as possible.

Seating a child in a child-restraint system on the front passenger seat is dangerous under certain conditions:

Your vehicle is equipped with front passenger seat weight sensors. Even with the front passenger seat weight sensors, if you must use the front passenger seat to seat a child, using a child-restraint system on the front passenger seat under the following conditions increases the danger of the front passenger air bag deploying and could result in serious injury or death to the child.

The front passenger air bag deactivation indicator light does not illuminate when seating a child in the child-restraint system.

Luggage or other items are placed on the seat with the child in the child-restraint system.

A rear passenger or luggage pushing or pulling down on the front passenger seatback.

A rear passenger puts their feet on the front seat rails.

Luggage or other items are placed on the seatback or hung on the head restraint.

The seat is washed.

Liquids are spilled on the seat.

The front passenger seat is moved backward, pushing into luggage or other items placed behind it.

The front passenger seatback contacts the rear seat.

Luggage or other items are placed between the front passenger seat and driver seat.

Any accessories, which might increase the total seated weight on the front passenger seat, are attached to the front passenger seat.

The designated positions with seat belts on the rear seats are the safest places for children. Always use seat belts and child restraints.

2-23

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page36

Monday, June 18 2012 1:48 PM

Black plate (36,1)

Essential Safety Equipment

Child Restraint

Do not allow a child or anyone to lean over or against the side window of a vehicle with side and curtain air bags:

It is dangerous to allow anyone to lean over or against the side window, the area of the front passenger seat, the front and rear window pillars and the roof edge along both sides from which the side and curtain air bags deploy, even if a child-restraint system is used. The impact of inflation from a side or curtain air bag could cause serious injury or death to an out of position child. Furthermore, leaning over or against the front door could block the side and curtain air bags and eliminate the advantages of supplemental protection. With the front air bag and the additional side air bag that comes out of the front seat, the rear seat is always a better location for children. Take special care not to allow a child to lean over or against the side window, even if the child is seated in a child-restraint system.

Never use one seat belt on more than one person at a time:

CAUTION

A seat belt or child-restraint system can become very hot in a closed vehicle during warm weather. To avoid burning yourself or a child, check them before you or your child touches them.

NOTE

Your Mazda is equipped with LATCH lower anchors for attachment of specially designed LATCH child-restraint systems in the rear seat. When using these anchors to secure a child-restraint system, refer to

“

LATCH Child-Restraint Systems

”

(page 2-32).

2-24

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page37

Monday, June 18 2012 1:48 PM

Black plate (37,1)

Essential Safety Equipment

Child Restraint

Child-Restraint System

Installation Position

In this owner's manual, explanation of child-restraint systems is provided for the following three types of popular childrestraint systems: infant seat, child seat, booster seat.

NOTE l l

Installation position is determined by the type of child-restraint system. Always read the manufacturer's instructions and this owner's manual carefully.

Due to variations in the design of childrestraint systems, vehicle seats and seat belts, all child-restraint systems may not fit all seating positions. Before purchasing a child-restraint system, it should be tested in the specific vehicle seating position (or positions) where it is intended to be used. If a previously purchased child-restraint system does not fit, you may need to purchase a different one that will.

Infant seat

An infant seat provides restraint by bracing the infant's head, neck and back against the seating surface.

Child seat

A child seat restrains a child's body using the harness.

Booster seat

A booster seat is a child restraint accessory designed to improve the fit of the seat belt system around the child's body.

2-25

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page38

Monday, June 18 2012 1:48 PM

Black plate (38,1)

Essential Safety Equipment

Child Restraint

Installing Child-Restraint

Systems

Accident statistics reveal that a child is safer in the rear seat. The front passenger's seat is clearly the worst choice for any child under 12, and with rear-facing childrestraint systems it is clearly unsafe due to air bags.

NOTE

Even if your vehicle is equipped with front passenger seat weight sensors (page 2-50), which automatically deactivates the front passenger air bag, a rear seat is the safest place for a child of any age or size.

Some child-restraint systems now come with tethers and therefore must be installed on the seats that take tethers to be effective. In your Mazda, tethered child-restraint systems can only be accommodated in the three positions on the rear seat.

Some child-restraint systems also employ specially designed LATCH attachments; refer to

“

LATCH Child-Restraint

Systems

”

(page 2-32).

WARNING

Tethered Child-Restraint Systems Work

Only on Tether-Equipped Rear Seats:

Installation of a tether equipped child-restraint system in the front passenger's seat defeats the safety design of the system and will result in an increased chance of serious injury if the child-restraint system goes forward without benefit of being tethered.

Place tether equipped child-restraint systems where there are tether anchors.

Rear Seat Child-Restraint System

Installation

Follow these instructions when using a child-restraint system, unless you are attaching a LATCH-equipped childrestraint system to the rear LATCH lower anchors. Refer to

“

LATCH Child-

Restraint Systems

”

(page 2-32).

NOTE

Follow the child-restraint system manufacturer's instructions carefully. If you are not sure whether you have a LATCH system or tether, check in the child-restraint system manufacturer's instructions and follow them accordingly. Depending on the type of child-restraint system, it may use LATCH system instead of seat belts or if the belt goes across the child's chest, may recommend against using automatic locking mode.

1. Make sure the seatback is securely latched by pushing it back until it is fully locked.

2. Raise the head restraint to the top locked position (except center seat position).

Refer to Head Restraints on page 2-7.

2-26

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page39

Monday, June 18 2012 1:48 PM

Black plate (39,1)

Essential Safety Equipment

Child Restraint

3. Secure the child-restraint system with the lap portion of the lap/shoulder belt.

See the manufacturer's instructions on the child-restraint system for belt routing instructions.

4. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor.

NOTE

Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the automatic locking mode. When you remove the child-restraint system, be sure the belt fully retracts to return the system to emergency locking mode before occupants use the seat belts.

6. If your child-restraint system requires the use of a tether strap, refer to the manufacturer's instructions to hook and tighten the tether strap after raising the head restraint.

Anchor bracket location (Outboard position)

5. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. A clicking noise from the retractor will be heard during retraction if the system is in the automatic locking mode. If the belt does not lock the seat down tight, repeat this step.

Tether strap position (Outboard position)

Tether strap

Forward

2-27

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page40

Monday, June 18 2012 1:48 PM

Black plate (40,1)

Essential Safety Equipment

Child Restraint

Anchor bracket location (Center position)

Tether strap position (Center position)

WARNING

Use the tether and tether anchor only for a child-restraint system:

Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury.

Always route the tether strap between the head restraint and the seatback

(Except center position):

Routing the tether strap on top of the head restraint is dangerous. In a collision the tether strap could slide off the head restraint and loosen the child-restraint system. The childrestraint system could move which may result in death or injury to the child.

Always attach the tether strap to the correct tether anchor position:

Attaching the tether strap to the incorrect tether anchor position is dangerous. In a collision, the tether strap could come off and loosen the child-restraint system. If the childrestraint system moves it could result in death or injury to the child.

2-28

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page41

Monday, June 18 2012 1:48 PM

Black plate (41,1)

Essential Safety Equipment

Child Restraint q

If You Must Use the Front Seat for Children

If you cannot put all children in the rear seat, at least put the smallest children in the rear and be sure the largest child up front uses the shoulder belt over the shoulder.

NEVER put a rear-facing child-restraint system on the front passenger seat whether your vehicle is equipped with a seat weight sensor or not.

This seat is also not set up for tethered child-restraint systems, put them in one of the rear seat positions set up with tether anchors.

Likewise the LATCH child-restraint system cannot be secured in the front passenger's seat and should be used in the rear seat.

Do not allow anyone to sleep against the side window if you have optional side and curtain air bags, it could cause serious injuries to an out of position occupant. As children more often sleep in cars, it is better to put them in the rear seat. If installing the child-restraint system on the front seat is unavoidable, follow these instructions when using a front-facing child-restraint system in the front passenger's seat.

NOTE l l

To check if your front seats have side air bags:

Mazda vehicles equipped with side air bag will have a

“

SRS AIRBAG

” tag on the outboard shoulder of the front seats.

To check if your vehicle has curtain air bags:

Mazda vehicles equipped with curtain air bag will have an

“

SRS AIRBAG

” marking on the window pillars along the roof edge.

WARNING

Always move the front passenger seat as far back as possible if installing a front-facing child-restraint system on it is unavoidable:

As your vehicle has front air bags and doubly so because your vehicle has side air bags, a front-facing child-restraint system should be put on the front passenger seat only when it is unavoidable.

Even if the front passenger air bag deactivation indicator light illuminates, always move the seat as far back as possible, because the force of a deploying air bag could cause serious injury or death to the child.

Never use a rear-facing child-restraint system in the front seat with an air bag that could deploy:

Rear-facing child-restraint systems on the front seat are particularly dangerous.

Even in a moderate collision, the child-restraint system can be hit by a deploying air bag and moved violently backward resulting in serious injury or death to the child.

Even though you may feel assured that the front passenger air bag will not deploy based on the fact that the front passenger air bag deactivation indicator light illuminates, you should not use a rear-facing childrestraint system in the front seat.

2-29

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page42

Monday, June 18 2012 1:48 PM

Black plate (42,1)

Essential Safety Equipment

Child Restraint

Do not allow a child or anyone to lean over or against the side window of a vehicle with side and curtain air bags:

Furthermore, leaning over or against the front door could block the side and curtain air bags and eliminate the advantages of supplemental protection. With the front air bag and the additional side air bag that comes out of the front seat, the rear seat is always a better location for children. Take special care not to allow a child to lean over or against the side window, even if the child is seated in a child-restraint system.

Front Passenger's Seat Child-

Restraint System Installation

1. Switch the ignition ON.

2. Slide the seat as far back as possible.

3. Place the child-restraint system on the seat without putting your weight on the seat and fasten the seat belt. See the manufacturer's instructions on the child-restraint system for belt routing instructions.

4. To get the retractor into the automatic locking mode, pull the shoulder belt portion of the seat belt until the entire length of the belt is out of the retractor.

5. Push the child-restraint system firmly into the vehicle seat. Be sure the belt retracts as snugly as possible. A clicking noise from the retractor will be heard during retraction if the system is in automatic locking mode. If the belt does not lock the seat down tight, repeat the previous step and also this one.

NOTE l

Inspect this function before each use of the child-restraint system. You should not be able to pull the shoulder belt out of the retractor while the system is in the l automatic locking mode. When you remove the child-restraint system, be sure the belt fully retracts to return the system to emergency locking mode before occupants use the seat belts.

Follow the child-restraint system manufacturer's instructions carefully.

Depending on the type of child-restraint system, it may not employ seat belts which are in automatic locking mode.

6. Seat your child safely in the childrestraint system and secure the child according to the instructions from the child-restraint system manufacturer.

2-30

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page43

Monday, June 18 2012 1:48 PM

Black plate (43,1)

Essential Safety Equipment

Child Restraint

7. Make sure the front passenger air bag deactivation indicator light illuminates after installing a child-restraint system on the front passenger seat.

If the front passenger air bag deactivation indicator light does not illuminate, remove the child-restraint system, switch the ignition to OFF or

ACC, and then re-install the childrestraint system.

Refer to Front Passenger Seat Weight

Sensors on page 2-50.

WARNING

Do not seat a child in a child-restraint system on the front passenger seat if the front passenger air bag deactivation indicator light does not illuminate:

While it is always better to install any child-restraint system on the rear seat, it is imperative that a childrestraint system ONLY be used on the front passenger seat if the deactivation indicator light illuminates when the child is seated in the child-restraint system (page

2-50). Seating a child in a childrestraint system installed on the front passenger seat with the front passenger air bag deactivation indicator light not illuminated is dangerous. If this indicator light does not illuminate, this means that the front passenger front and side air bags, and seat belt pretensioner are ready for deployment. If an accident were to deploy an air bag, a child in a child-restraint system sitting in the front passenger seat could be seriously injured or killed. If the indicator light does not illuminate after seating a child in a childrestraint system on the front passenger seat, seat a child in a child-restraint system on the rear seat and consult an Authorized

Mazda Dealer as soon as possible.

2-31

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page44

Monday, June 18 2012 1:48 PM

Black plate (44,1)

Essential Safety Equipment

Child Restraint

LATCH Child-Restraint Systems

Your Mazda is equipped with LATCH lower anchors for attachment of specially designed

LATCH child-restraint systems in the rear seats. Both anchors must be used, otherwise the seat will bounce around and put the child in danger. Most LATCH child-restraint systems must also be used in conjunction with a tether to be effective. If they have a tether you must use it to better assure your child's safety.

WARNING

Follow the manufacturer's instructions for the use of the child-restraint system:

An unsecured child-restraint system is dangerous. In a sudden stop or a collision it could move causing serious injury or death to the child or other occupants. Make sure the child-restraint system is properly secured in place according to the childrestraint system manufacturer's instructions.

Never attach two child-restraint systems to the same LATCH lower anchor:

Attaching two child-restraint systems to the same LATCH lower anchor is dangerous.

In a collision, one anchor may not be strong enough to hold two child-restraint system attachments, and it may break, causing serious injury or death. If you use the seat position for another child-restraint system when an outboard LATCH position is occupied, use the center seat belts instead, and the tether if tether-equipped.

Make sure the child-restraint system is properly secured:

An unsecured child-restraint system is dangerous. In a sudden stop or a collision it could move causing serious injury or death to the child or other occupants. Follow the child-restraint system manufacturer's instructions on belt routing to secure the seat just as you would with a child in it so that nobody is tempted to put a child in an improperly secured seat later on. When not in use, remove it from the vehicle or fasten it with a seat belt, or latch it down to BOTH LATCH lower anchors for LATCH child-restraint systems.

Make sure there are no seat belts or foreign objects near or around the LATCH childrestraint system:

Not following the child-restraint system manufacturer's instructions when installing the child-restraint system is dangerous. If seat belts or a foreign object prevent the child-restraint system from being securely attached to the LATCH lower anchors and the child-restraint system is installed improperly, the child-restraint system could move in a sudden stop or collision causing serious injury or death to the child or other occupants. When installing the child-restraint system, make sure there are no seat belts or foreign objects near or around the LATCH lower anchors. Always follow the child-restraint system manufacturer's instructions.

2-32

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page45

Monday, June 18 2012 1:48 PM

Black plate (45,1) q

LATCH Child-Restraint System

Installation Procedure (Rear

Outboard Seats)

1. First, adjust the front seat to allow clearance between the child-restraint system and the front seat (page 2-2).

2. Make sure the seatback is securely latched by pushing it back until it is fully locked.

3. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LATCH lower anchors.

Essential Safety Equipment

Child Restraint

6. If your child-restraint system came equipped with a tether, that means it is very important to properly secure the tether for child safety. Please carefully follow the child-restraint system manufacturer's instructions when installing tethers.

Anchor bracket location

NOTE

The markings above the LATCH lower anchors indicate the locations of LATCH lower anchors for the attachment of a child-restraint system.

4. Raise the head restraint to the top locked position.

Refer to Head Restraints on page 2-7.

5. Secure the child-restraint system using

BOTH LATCH lower anchors, following the child-restraint system manufacturer's instruction. Pull on the child-restraint to be sure both anchors are engaged.

Tether strap position

Tether strap

Forward

2-33

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page46

Monday, June 18 2012 1:48 PM

Black plate (46,1)

Essential Safety Equipment

Child Restraint

WARNING

Use the tether and tether anchor only for a child-restraint system:

Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury.

Always route the tether strap between the head restraint and the seatback:

Always attach the tether strap to the correct tether anchor position:

LATCH Child-Restraint System

Installation Procedure (Rear

Center Seat)

The LATCH lower anchors at the center of the rear seat are much further apart than the sets of LATCH lower anchors for child-restraint system installation at other seating positions. Child-restraint systems with rigid LATCH attachments cannot be installed on the center seating position.

Some LATCH equipped child-restraint systems can be placed in the center position and will reach the nearest

LATCH lower anchors which are 390 mm

(15.35 in) apart. LATCH compatible child-restraint systems (with attachments on belt webbing) can be used at this seating position only if the child-restraint system manufacturer's instructions state that the child-restraint system can be installed to LATCH lower anchors that are

390 mm (15.35 in) apart. Do not attach two child-restraint systems to the same

LATCH lower anchor. If your childrestraint system has a tether, it must also be used for your child's optimum safety.

2-34

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page47

Monday, June 18 2012 1:48 PM

Black plate (47,1)

Essential Safety Equipment

Child Restraint

WARNING

Use the tether and tether anchor only for a child-restraint system:

Using the tether or tether anchor to secure anything but a child-restraint system is dangerous. This could weaken or damage the tether or tether anchor and result in injury.

Always attach the tether strap to the correct tether anchor position:

1. Make sure the seatback is securely latched by pushing it back until it is fully locked.

2. Expand the area between the seat bottom and the seatback slightly to verify the locations of the LATCH lower anchors.

3. Secure the child-restraint system using

BOTH LATCH lower anchors, following the child-restraint system manufacturer's instructions. Pull on the child-restraint to be sure both anchors are engaged.

4. If your child-restraint system came equipped with a tether, that means it is very important to properly secure the tether for child safety. Please carefully follow the child-restraint system manufacturer's instructions when installing tethers.

Anchor bracket location

Tether strap position

NOTE

The markings above the LATCH lower anchors indicate the locations of LATCH lower anchors for the attachment of a child-restraint system.

Downloaded from

Form No.8CL7-EA-12H

2-35

Mazda2_8CL7-EA-12H_Edition1 Page48

Monday, June 18 2012 1:48 PM

Black plate (48,1)

Essential Safety Equipment

SRS Air Bags

Supplemental Restraint System (SRS) Precautions

The front and side supplemental restraint systems (SRS) include 6 air bags.

Please verify the air bags equipped on your vehicle by locating the

“

SRS AIRBAG

” location indicators.

These indicators are visible in the area where the air bags are installed.

The air bags are installed in the following locations: l l l l

The steering wheel hub (driver air bag)

The front passenger dashboard (front passenger air bag)

The outboard sides of the front seatbacks (side air bags)

The front and rear window pillars, and the roof edge along both sides (curtain air bags)

The air bag supplemental restraint systems are designed to provide supplemental protection in certain situations, so seat belts are always important in the following ways:

Without seat belt usage, the air bags cannot provide adequate protection during an accident.

Seat belt usage is necessary to: l l l l l l

Keep the occupant from being thrown into an inflating air bag.

Reduce the possibility of injuries during an accident that is not designed for air bag inflation, such as roll-over or rear impact.

Reduce the possibility of injuries in frontal, near frontal, side collisions that are not severe enough to activate the air bags.

Reduce the possibility of being thrown from your vehicle.

Reduce the possibility of injuries to lower body and legs during an accident because the air bags provide no protection to these parts of the body.

Hold the driver in a position which allows better control of the vehicle.

2-36

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page49

Monday, June 18 2012 1:48 PM

Black plate (49,1)

Essential Safety Equipment

SRS Air Bags

If your vehicle is also equipped with a driver and front passenger occupant classification system, refer to the Driver and Front Passenger Occupant Classification

System (page 2-50) for details.

If your vehicle is equipped with a driver and front passenger occupant classification system, the front passenger air bag deactivation indicator light illuminates for a specified time after the ignition is switched ON.

Small children must be protected by a child-restraint system as stipulated by law in every state and province. In certain states and provinces, larger children must use a child-restraint system (page 2-21).

Carefully consider which child-restraint system is necessary for your child and follow the installation directions in this Owner's Manual as well as the child-restraint system manufacturer's instructions.

WARNING

Seat belts must be worn in air bag equipped vehicles:

Depending only on the air bags for protection during an accident is dangerous.

Alone, air bags may not prevent serious injuries. The appropriate air bags can be expected to inflate only in the first accident, such as frontal, near frontal, side collisions that are at least moderate. Vehicle occupants should always wear seat belts.

Children should not ride in the front passenger seat:

Placing a child, 12 years or under, in the front seat is dangerous. The child could be hit by a deploying air bag and be seriously injured or even killed. Even if the front passenger air bag deactivation indicator light illuminates, always move the front passenger seat as far back as possible. A sleeping child is more likely to lean against the door and be hit by the side air bag in a moderate collision to the front-passenger side of the vehicle. Whenever possible, always secure a child 12 years and under on the rear seat with an appropriate child-restraint system for the child's age and size.

2-37

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page50

Monday, June 18 2012 1:48 PM

Black plate (50,1)

Essential Safety Equipment

SRS Air Bags

Never use a rear-facing child-restraint system in the front seat with an air bag that could deploy:

Do not sit too close to the driver and front passenger air bags:

Sitting too close to the driver and front passenger air bag modules or placing hands or feet on them is extremely dangerous. The driver and front passenger air bags inflate with great force and speed. Serious injuries could occur if someone is too close. The driver should always hold onto only the rim of the steering wheel. The front seat passenger should keep both feet on the floor. Front seat occupants should adjust their seats as far back as possible and always sit upright against the seatbacks with seat belts worn properly.

Sit in the center of the seat and wear seat belts properly:

Sitting too close to the side air bag modules or placing hands on them, or sleeping up against the door or hanging out the windows is extremely dangerous. The side and curtain air bags inflate with great force and speed directly expanding along the door on the side the car is hit. Serious injury could occur if someone is sitting too close to the door or leaning against a window, or if rear seat occupants grab the sides of the front seatbacks. Give the side and curtain air bags room to work by sitting in the center of the seat while the vehicle is moving with seat belts worn properly.

Do not attach objects on or around the area where driver and front passenger air bags deploy:

Attaching an object to the driver and front passenger air bag modules or placing something in front of them is dangerous. In an accident, an object could interfere with air bag inflation and injure the occupants.

2-38

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page51

Monday, June 18 2012 1:48 PM

Black plate (51,1)

Essential Safety Equipment

SRS Air Bags

Do not attach objects on or around the area where a side air bag deploys:

Attaching objects to the front seat in such a way as to cover the outboard side of the seat in any way is dangerous. In an accident the object could interfere with the side air bag, which inflates from the outboard side of the front seats, impeding the added protection of the side air bag system or redirecting the air bag in a way that is dangerous. Furthermore, the bag could be cut open releasing the gas.

Do not hang net bags, map pouches or backpacks with side straps on the front seats. Never use seat covers on the front seats. Always keep the side air bag modules in your front seats free to deploy in the event of a side collision.

Do not attach objects on or around the area where a curtain air bag deploys:

Attaching objects to the areas where the curtain air bag activates such as on the windshield glass, side door glass, front and rear window pillars and along the roof edge and assist grips is dangerous. In an accident the object could interfere with the curtain air bag, which inflates from the front and rear window pillars and along the roof edge, impeding the added protection of the curtain air bag system or redirecting the air bag in a way that is dangerous. Furthermore, the bag could be cut open releasing the gas.

Do not place hangers or any other objects on the assist grips. When hanging clothes, hang them on the coat hook directly. Always keep the curtain air bag modules free to deploy in the event of a side collision.

Do not place luggage or other objects under the front seats:

Placing luggage or other objects under the front seats is dangerous. The components essential to the supplemental restraint system could be damaged, and in the event of a side collision, the appropriate air bags may not deploy, which could result in death or serious injury. To prevent damage to the components essential to the supplemental restraint system, do not place luggage or other objects under the front seats.

Do not touch the components of the supplemental restraint system after the air bags have inflated:

Touching the components of the supplemental restraint system after the air bags have inflated is dangerous. Immediately after inflation, they are very hot. You could get burned.

Never install any front-end equipment to your vehicle:

Installation of front-end equipment, such as frontal protection bar (kangaroo bar, bull bar, push bar, or other similar devices), snowplow, or winches, is dangerous. The air bag crash sensor system could be affected. This could cause air bags to inflate unexpectedly, or it could prevent the air bags from inflating during an accident.

Front occupants could be seriously injured.

2-39

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page52

Monday, June 18 2012 1:48 PM

Black plate (52,1)

Essential Safety Equipment

SRS Air Bags

Do not modify the suspension:

Modifying the vehicle suspension is dangerous. If the vehicle's height or the suspension is modified, the vehicle will be unable to accurately detect a collision resulting in incorrect or unexpected air bag deployment and the possibility of serious injuries.

Do not modify the supplemental restraint system:

Modifying the components or wiring of the supplemental restraint system is dangerous. You could accidentally activate it or make it inoperable. Do not make any modifications to the supplemental restraint system. This includes installing trim, badges, or anything else over the air bag modules. It also includes installing extra electrical equipment on or near system components or wiring. An Authorized Mazda

Dealer can provide the special care needed in the removal and installation of front seats. It is important to protect the air bag wiring and connections to assure that the bags do not accidentally deploy, the driver seat slide position sensor and front passenger seat weight sensors are not damaged and that the seats retain an undamaged air bag connection.

NOTE l l

When an air bag deploys, a loud inflation noise can be heard and some smoke will be released.

Neither is likely to cause injury, however, the texture of the air bags may cause light skin injuries on body parts not covered with clothing through friction.

Should you sell your Mazda, we urge you to tell the new owner of its air bag systems and that familiarization with all instructions about them, from the Owner's Manual, is important.

2-40

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page53

Monday, June 18 2012 1:48 PM

Black plate (53,1)

Essential Safety Equipment

SRS Air Bags

Supplemental Restraint System Components

Driver/Front passenger inflators and air bags

Crash sensor, and diagnostic module (SAS unit)

Front seat belt pretensioner and load limiting systems (page 2-15)

Front air bag sensor

Side crash sensors

Air bag/front seat belt pretensioner system warning light (page 2-45)

Side and curtain inflators and air bags

Front passenger air bag deactivation indicator light (page 2-50)

Front passenger seat weight sensors (page 2-50)

Front passenger seat weight sensor control module

Driver and front passenger seat belt buckle switches (page 2-54)

Driver seat slide position sensor (page 2-50)

Downloaded from

Form No.8CL7-EA-12H

2-41

Mazda2_8CL7-EA-12H_Edition1 Page54

Monday, June 18 2012 1:48 PM

Black plate (54,1)

Essential Safety Equipment

SRS Air Bags

How the SRS Air Bags Work

Your Mazda is equipped with the following types of SRS air bags. SRS air bags are designed to work together with the seat belts to help to reduce injuries during an accident.

The SRS air bags are designed to provide further protection for passengers in addition to the seat belt functions. Be sure to wear seat belts properly.

Front Seat Belt Pretensioners

The front seat belt pretensioners are designed to deploy in moderate or severe frontal, near frontal collisions.

Driver Air Bag

The driver's air bag is mounted in the steering wheel.

When air bag crash sensors detect a frontal impact of greater than moderate force, the driver's air bag inflates quickly helping to reduce injury mainly to the driver's head or chest caused by directly hitting the steering wheel.

For more details about air bag deployment, refer to

“

SRS Air Bag Deployment Criteria

”

(page 2-47).

The driver's dual-stage air bag controls air bag inflation in two energy stages. During an impact of moderate severity the driver's air bag deploys with lesser energy, whereas during more severe impacts, it deploys with more energy.

2-42

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page55

Monday, June 18 2012 1:48 PM

Black plate (55,1)

Essential Safety Equipment

SRS Air Bags q

Front Passenger Air Bag

The front passenger air bag is mounted in the front passenger dashboard.

The inflation mechanism for the front passenger air bag is the same as the driver's air bag, as mentioned above.

For more details about air bag deployment, refer to

“

SRS Air Bag Deployment Criteria

”

(page 2-47).

In addition, the front passenger air bag is designed to only deploy in accordance with the total seated weight on the front passenger seat. For details, refer to the driver and front passenger occupant classification system (page 2-50).

Downloaded from

Form No.8CL7-EA-12H

2-43

Mazda2_8CL7-EA-12H_Edition1 Page56

Monday, June 18 2012 1:48 PM

Black plate (56,1)

Essential Safety Equipment

SRS Air Bags q

Side Air Bags

The side air bags are mounted in the outboard sides of the front seatbacks.

When the air bag crash sensors detect a side impact of greater than moderate force, the system inflates the side air bag only on the side in which the vehicle was hit. The side air bag inflates quickly to reduce injury to the driver or front passenger's chest caused by directly hitting interior parts such as a door or window.

For more details about air bag deployment, refer to

“

SRS Air Bag Deployment Criteria

”

(page 2-47).

In addition, the front passenger side air bag is designed to only deploy in accordance with the total seated weight on the front passenger seat. For details, refer to the driver and front passenger occupant classification system (page 2-50).

Curtain Air Bags

The curtain air bags are mounted in the front and rear window pillars, and the roof edge along both sides.

When the air bag crash sensors detect a side impact of greater than moderate force, the curtain air bag inflates quickly and helps to reduce injury mainly to the rear outboard passenger's head caused by directly hitting interior parts such as a door or window.

For more details about air bag deployment, refer to

“

SRS Air Bag Deployment Criteria

”

(page 2-47).

2-44

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page57

Monday, June 18 2012 1:48 PM

Black plate (57,1)

Essential Safety Equipment

SRS Air Bags

In a side impact:

Greater than moderate impact to one side of the vehicle will cause the curtain air bag on that side only to inflate.

The side and curtain air bags will deploy only on the side the vehicle receives the force of the impact.

In an angled collision:

During a collision, driver/front passenger air bag and the curtain air bag will deploy.

Air Bag/Front Seat Belt Pretensioner System Warning Light

2-45

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page58

Monday, June 18 2012 1:48 PM

Black plate (58,1)

Essential Safety Equipment

SRS Air Bags

WARNING

Never tamper with the air bag/pretensioner systems and always have an Authorized

Mazda Dealer perform all servicing and repairs:

Self-servicing or tampering with the systems is dangerous. An air bag/pretensioner could accidentally activate or become disabled causing serious injury or death.

Air Bag/Front Seat Belt Pretensioner System Warning Beep

If a malfunction is detected in the air bag/front seat belt pretensioner systems and the warning light, a warning beep sound will be heard for about 5 seconds every minute.

The air bag and seat belt pretensioner system warning beep sound will continue to be heard for approximately 35 minutes.

Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible.

WARNING

Do not drive the vehicle with the air bag/front seat belt pretensioner system warning beep sounding:

Driving the vehicle with the air bag/front seat belt pretensioner system warning beep sounding is dangerous. In a collision, the air bags and the front seat belt pretensioner system will not deploy and this could result in death or serious injury.

Contact an Authorized Mazda Dealer to have the vehicle inspected as soon as possible.

2-46

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page59

Monday, June 18 2012 1:48 PM

Black plate (59,1)

Essential Safety Equipment

SRS Air Bags

SRS Air Bag Deployment Criteria

This chart indicates the applicable SRS equipment that will deploy depending on the type of collision.

(The illustrations are the representative cases of collisions.)

A severe frontal/near frontal collision

Types of collision

A severe side collision A rear collision

SRS equipment

Front seat belt pretensioner

Driver air bag

Front passenger air bag

Side air bag

Curtain air bag

(both sides)

(impact side only)

X (impact side only)

No air bag and front seat belt pretensioner will be activated in a rear collision.

X: The SRS air bag equipment is designed to deploy in a collision.

*1: The front passenger front and side air bags and the seat belt pretensioner are designed to deploy depending on the condition of the total seated weight on the front passenger seat.

*2: In an angled collision, the curtain air bag might deploy.

2-47

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page60

Monday, June 18 2012 1:48 PM

Black plate (60,1)

Essential Safety Equipment

SRS Air Bags

Limitations to SRS Air Bag

In severe collisions such as those described previously in

“

SRS Air Bag Deployment

Criteria

”

, the applicable SRS air bag equipment will deploy. However, in some accidents, the equipment may not deploy depending on the type of collision and its severity.

Limitations to front/near front collision detection:

The following illustrations are examples of front/near front collisions that may not be detected as severe enough to deploy the SRS air bag equipment.

Impacts involving trees or poles Frontal offset impact to the vehicle

Rear-ending or running under a truck's tail gate

Limitations to side collision detection:

The following illustrations are examples of side collisions that may not be detected as severe enough to deploy the SRS air bag equipment.

Side impacts involving trees or poles

Side impacts with two-wheeled vehicles

2-48

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page61

Monday, June 18 2012 1:48 PM

Roll-over

Black plate (61,1)

Essential Safety Equipment

SRS Air Bags

Downloaded from

Form No.8CL7-EA-12H

2-49

Mazda2_8CL7-EA-12H_Edition1 Page62

Monday, June 18 2012 1:48 PM

Black plate (62,1)

Essential Safety Equipment

SRS Air Bags

Driver and Front Passenger Occupant Classification System

First, please read

“

Supplemental Restraint System (SRS) Precautions

”

(page 2-36) carefully.

Driver Seat Slide Position Sensor

Your vehicle is equipped with a driver seat slide position sensor as a part of the supplemental restraint system. The sensor is located under the driver seat. The sensor determines whether the driver seat is fore or aft of a reference position and sends the seat position to the diagnostic module (SAS unit). The SAS unit is designed to control the deployment of the driver air bag depending on how close the driver seat is to the steering wheel.

The air bag/front seat belt pretensioner system warning light flashes if the sensor has a possible malfunction (page 2-45).

Front Passenger Seat Weight Sensors

Your vehicle is equipped with a front passenger seat weight sensors as a part of the supplemental restraint system. These sensors are located under both of the front passenger seat rails. These sensors determine the total seated weight on the front passenger seat and monitor the seat belt buckle for the front passenger seat. The SAS unit is designed to prevent the front passenger front and side air bags and seat belt pretensioner system from deploying if the front passenger air bag deactivation indicator light illuminates.

To reduce the chance of injuries caused by deployment of the front passenger air bag, the system deactivates the front passenger front and side air bags and also the seat belt pretensioner system when the front passenger air bag deactivation indicator light illuminates. Refer to the following table for the front passenger air bag deactivation indicator light illumination conditions.

This system shuts off the front passenger front and side air bags and seat belt pretensioner system, so make sure the front passenger air bag deactivation indicator light illuminates according to the following table.

The air bag/front seat belt pretensioner system warning light flashes and the front passenger air bag deactivation indicator light illuminates if the sensors have a possible malfunction. If this happens, the front passenger front and side air bags and seat belt pretensioner system will not deploy.

2-50

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page63

Monday, June 18 2012 1:48 PM

Black plate (63,1)

Essential Safety Equipment

SRS Air Bags

Front passenger air bag deactivation indicator light

This indicator light illuminates to remind you that the front passenger front and side air bags and seat belt pretensioner will not deploy during a collision.

If the front passenger weight sensors are normal, the indicator light illuminates when the ignition is switched ON. The light turns off after a few seconds.

The front passenger air bag deactivation indicator light illuminates or is off under the following conditions:

Condition detected by the front passenger occupant classification system

Empty (Not occupied)

Child or child-restraint system

Adult

Front passenger air bag deactivation indicator light

Front passenger front and side air bags

Off

Deactivated

Ready

Front passenger seat belt pretensioner system

Deactivated

Ready

*1 : If the front passenger seat belt is buckled, the front passenger air bag deactivation indicator light illuminates, however this does not indicate a malfunction.

*2 : If a larger child sits on the front passenger seat, the sensors might detect the child as being an adult depending on the child's physique.

*3 : If a smaller adult sits on the front passenger seat, the sensors might detect the person as being a child depending on the person's physique.

The curtain air bag is ready for inflating regardless of the chart above.

If the front passenger air bag deactivation indicator light does not illuminate when the ignition is switched ON and does not illuminate as indicated in the above chart, do not allow a child to sit in the front passenger seat and consult an Authorized Mazda Dealer as soon as possible. The system may not work properly in an accident.

2-51

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page64

Monday, June 18 2012 1:48 PM

Black plate (64,1)

Essential Safety Equipment

SRS Air Bags

WARNING

Do not decrease the total seated weight on the front passenger seat:

When an adult or large child sits on the front passenger seat, decreasing the total seated weight on the front passenger seat required for air bag deployment is dangerous. The front passenger seat weight sensors will detect the reduced total seated weight condition and the front passenger front and side air bags and seat belt pretensioner system will not deploy during an accident. The front passenger will not have the supplementary protection of the air bag, which could result in serious injury. Decreasing the total seated weight on the front passenger seat could result in an air bag not deploying under the following conditions, for example:

A rear passenger pushes up on the front passenger seat with their feet.

Luggage or other items placed under the front passenger seat or between the front passenger seat and driver seat that push up the front passenger seat bottom.

The front passenger seat occupant sits in a manner that does not place the entire weight of the occupant on the seat such as by sitting too close to the door, grasping the assist grip and sitting with the seatback reclined too far.

Any accessories which might decrease the total seated weight on the front passenger seat are attached to the front passenger seat.

The front passenger front and side air bags and seat belt pretensioner systems will deactivate if the front passenger air bag deactivation indicator light illuminates.

2-52

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page65

Monday, June 18 2012 1:48 PM

Black plate (65,1)

Essential Safety Equipment

SRS Air Bags

Do not increase the total seated weight on the front passenger seat:

When an infant or small child sits on the front passenger seat, increasing the total seated weight on the front passenger seat is dangerous. The front passenger seat weight sensors will detect the increased total seated weight, which could result in the unexpected deployment of the front passenger front and side air bags and seat belt pretensioner system in an accident and may cause serious injury. Increasing the total seated weight on the front passenger seat could result in the front passenger front and side air bags and seat belt pretensioner system deployment in an accident under the following conditions, for example:

Luggage or other items are placed on the seat with the child in the child-restraint system.

A rear passenger or luggage push or pull down on the front passenger seatback.

A rear passenger steps on the front passenger seat rails with their feet.

Luggage or other items are placed on the seatback or hung on the head restraint.

The seat is washed.

Liquids are spilled on the seat.

The front passenger seat is moved backward, pushing into luggage or other items placed behind it.

The front passenger seatback contacts the rear seat.

Luggage or other items are placed between the front passenger seat and driver seat.

Any accessories which might increase the total seated weight on the front passenger seat are attached to the front passenger seat.

The front passenger front and side air bags and seat belt pretensioner systems will deactivate if the front passenger air bag deactivation indicator light illuminates.

CAUTION

To assure proper deployment of the front air bag and to prevent damage to the sensors in the front seat bottoms:

Do not place sharp objects on the front seat bottoms or leave heavy luggage on them.

Do not spill any liquids on the front seats or under the front seats.

To allow the sensors to function properly, always perform the following:

Adjust the front seats as far back as possible and always sit upright against the

Ø seatbacks with seat belts worn properly.

If you place your child on the front passenger seat, secure the child-restraint system properly and slide the front passenger seat as far back as possible (page

2-30).

2-53

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page66

Monday, June 18 2012 1:48 PM

Black plate (66,1)

Essential Safety Equipment

SRS Air Bags

NOTE l l l l l

The system requires about 10 seconds to alternate between turning the front passenger front and side air bags and seat belt pretensioner system on or off.

The front passenger air bag deactivation indicator light may illuminate repeatedly if luggage or other items are put on the front passenger seat, or if the temperature of the vehicle's interior changes suddenly.

The front passenger air bag deactivation indicator light may illuminate for 10 seconds if the total seated weight on the front passenger seat changes.

The air bag/front seat belt pretensioner system warning light might illuminate if the front passenger seat receives a severe impact.

If the front passenger air bag deactivation indicator light does not illuminate after installing a child-restraint system on the front passenger seat, first, re-install your child-restraint system according to the procedure in this owner's manual. Then, if the front passenger air bag l deactivation indicator light still does not illuminate, install the child-restraint system on the rear seat and consult an Authorized Mazda Dealer as soon as possible.

If the front passenger air bag deactivation indicator light illuminates when an adult is seated in the front passenger seat, have the passenger re-adjust their posture by sitting with their feet on the floor, and then re-fastening the seat belt. If the front passenger air bag deactivation indicator light still illuminates, move the passenger to the rear seat. If sitting in the rear seat is not possible, slide the front passenger seat as far back as possible. Consult an Authorized Mazda Dealer as soon as possible.

Driver and Front Passenger Buckle Switches

The buckle switches on the front seat belts detect whether or not the front seat belts are securely fastened and further control the deployment of the air bags.

2-54

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page67

Monday, June 18 2012 1:48 PM

Black plate (67,1)

Essential Safety Equipment

SRS Air Bags

Monitoring and Maintenance

Constant Monitoring

The following components of the air bag systems are monitored by a diagnostic system: l l l l l l l l l l l l

Crash sensors, and diagnostic module (SAS unit)

Front air bag sensor

Air bag modules

Side crash sensors

Air bag/Front seat belt pretensioner system warning light

Front seat belt pretensioners

Related wiring

Front passenger air bag deactivation indicator light

Driver seat slide position sensor

Front passenger seat weight sensors

Front passenger seat weight sensor control module

Front passenger seat belt buckle switch

The diagnostic module continuously monitors the system's readiness. This begins when the ignition is switched ON and continues while the vehicle is being driven.

Maintenance

The air bag systems do not require regular maintenance. But if any of the following occurs, take your vehicle to an Authorized Mazda Dealer as soon as possible: l

The air bag system warning light flashes.

l l l l l

The air bag system warning light remains illuminated.

The air bag system warning light does not illuminate when the ignition is switched ON.

The air bag system warning beep sound is heard.

The air bags have deployed.

Front passenger air bag deactivation indicator light does not illuminate when the ignition is switched ON or does not illuminate as indicated in the chart. For more details about this indicator light and this chart, refer to

“

Front passenger seat weight sensors

”

(page

2-50).

2-55

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page68

Monday, June 18 2012 1:48 PM

Black plate (68,1)

Essential Safety Equipment

SRS Air Bags

WARNING

Do not operate a vehicle with damaged air bag/seat belt pretensioner system components:

Expended or damaged air bag/seat belt pretensioner system components must be replaced after any collision which caused them to deploy or damage them. Only a trained Authorized Mazda Dealer can fully evaluate these systems to see that they will work in any subsequent accident. Driving with an expended or damaged air bag or pretensioner unit will not afford you the necessary protection in the event of any subsequent accident which could result in serious injury or death.

Do not remove interior air bag parts:

Removing any components such as the front seats, front dashboard, the steering wheel or parts on the front and rear window pillars and along the roof edge, containing air bag parts or sensors is dangerous. These parts contain essential air bag components. The air bag could accidentally activate and cause serious injuries.

Always have an Authorized Mazda Dealer remove these parts.

Dispose of the air bag properly:

Improper disposal of an air bag or a vehicle with live air bags in it can be extremely dangerous. Unless all safety procedures are followed, injury can result. Ask an

Authorized Mazda Dealer how to safely dispose of an air bag or how to scrap an air bag equipped vehicle.

NOTE

If it becomes necessary to have the components or wiring system for the supplementary restraint system modified to accommodate a person with certain medical conditions in accordance with a certified physician, contact an Authorized Mazda Dealer, refer to

“

Customer Assistance (U.S.A.)

”

(page 9-2).

2-56

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page69

Monday, June 18 2012 1:48 PM

Black plate (69,1)

Knowing Your Mazda

Explanation of basic operations and controls; opening/closing and adjustment of various parts.

Doors and Locks ........................................................................... 3-2

Keys .......................................................................................... 3-2

Keyless Entry System

............................................................ 3-3

Door Locks ............................................................................... 3-7

Liftgate .................................................................................... 3-10

Power Windows ...................................................................... 3-15

Fuel-Filler Lid and Cap ........................................................... 3-18

Hood ....................................................................................... 3-19

Security System ........................................................................... 3-22

Immobilizer System ................................................................ 3-22

Steering Wheel and Mirrors ...................................................... 3-25

Steering Wheel ........................................................................ 3-25

Mirrors .................................................................................... 3-25

Downloaded from

Form No.8CL7-EA-12H

Some models.

3-1

Mazda2_8CL7-EA-12H_Edition1 Page70

Monday, June 18 2012 1:48 PM

Black plate (70,1)

Knowing Your Mazda

Doors and Locks

Keys

WARNING

Do not leave the key in your vehicle with children and keep them in a place where your children will not find or play with them:

Leaving children in a vehicle with the key is dangerous. This could result in someone being badly injured or even killed. Children may find these new kinds of keys to be an interesting toy to play with and could cause the power windows or other controls to operate, or even make the vehicle move.

NOTE

Refer to Immobilizer System (page 3-22) for information regarding keys and engine starting.

The keys operate all locks.

With keyless entry system

Retractable type key

Without keyless entry system

Key code number plate

A code number is stamped on the plate attached to the key set; detach this plate and store it in a safe place (not in the vehicle) for use if you need to make a replacement key.

NOTE l l

Write down the code number and keep it in a separate, safe and convenient place, but not in the vehicle.

If your key is lost, consult your Authorized

Mazda Dealer and have your code number ready.

Some types of key chains cannot be attached to the retractable type key. In this case, use the key ring provided with the transmitter which has the key code number plate attached.

Key code number plate

Key ring

3-2

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page71

Monday, June 18 2012 1:48 PM

Black plate (71,1)

Knowing Your Mazda

Doors and Locks

Key extend/retract method (Retractable type key)

To extend the key, press the release button.

To retract the key, rotate it into the holder while pressing the release button.

Keyless Entry System

This system remotely locks and unlocks the doors and the liftgate.

It can also help you signal for attention.

Press the buttons slowly and carefully.

CAUTION

To avoid damage to the transmitter, do not:

Drop the transmitter.

Get the transmitter wet.

Disassemble the transmitter.

Expose the transmitter to any kind of magnetic field.

Expose the transmitter to high temperatures on places such as the dashboard or hood, under direct sunlight.

NOTE l l

The keyless entry system is designed to operate up to about 2.5 m (8 ft) from the center of the vehicle, but this may vary due to local conditions.

The system does not operate when the key is l l in the ignition switch.

If the transmitter does not operate when pressing a button or the operation range becomes too small, the battery may be dead. To install a new battery, refer to

Maintenance (page 3-5).

Additional transmitters can be obtained at an Authorized Mazda Dealer. Up to 3 transmitters can be used with the keyless entry system per vehicle. Bring all transmitters to an Authorized Mazda

Dealer when additional transmitters are required.

Some models.

3-3

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page72

Monday, June 18 2012 1:48 PM

Black plate (72,1)

Knowing Your Mazda

Doors and Locks q

Transmitter

Lock button

Unlock button

Operation indicator light

Panic button

NOTE l l

(U.S.A.)

This device complies with Part 15 of the

FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

(CANADA)

This device complies with RSS-210 of

Industry CANADA. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The operation indicator light flashes when the buttons are pressed.

Lock button

To lock the doors and the liftgate, press the lock button.

To confirm that all doors and the liftgate have been locked, press the lock button again within 5 seconds. If they are closed and locked, the horn will sound.

NOTE l l l

Doors and the liftgate can be locked by pressing the lock button while any other door or the liftgate is open. However, the hazard warning lights will not flash and the horn will not sound.

All doors and the liftgate cannot be locked when any door or the liftgate is open and the key is in the ignition switch.

Confirm that all doors and the liftgate are locked visually or audibly by use of the double click.

Unlock button

To unlock the driver's door, press the unlock button.

To unlock all doors and the liftgate, press the unlock button again within 5 seconds.

NOTE

Auto re-lock function

After unlocking with the transmitter, all doors and the liftgate will automatically lock if one of the doors or the liftgate is not opened within about 30 seconds.

Panic button

If you witness from a distance someone attempting to break into or damage your vehicle, pressing the panic button will activate the vehicle's alarm.

NOTE

The panic button will work whether any door or the liftgate is open or closed.

Turning on the alarm

Pressing the panic button for 1 second or more will trigger the alarm for about 2 minutes and 30 seconds, and the following will occur: l l

The horn sounds intermittently.

The hazard warning lights flash.

3-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page73

Monday, June 18 2012 1:48 PM

Black plate (73,1)

Knowing Your Mazda

Doors and Locks

Turning off the alarm

Press any button on the transmitter.

Transmitter Maintenance

If the buttons on the transmitter are inoperable and the operation indicator light does not flash, the battery may be dead.

Replace with a new battery before the transmitter becomes unusable.

CAUTION

Install the battery with the positive pole ( ) facing down. Battery leakage could occur if it is not installed correctly.

When replacing the battery, be careful not to touch any of the internal circuitry and electrical terminals, bend the electrical terminals, or get dirt in the transmitter as the transmitter could be damaged.

There is the danger of explosion if the battery is not correctly replaced.

Replace only with the same type battery (CR1620 or equivalent).

Dispose of used batteries according to the following instructions.

Insulate the plus and minus

Ø terminals of the battery using cellophane or equivalent tape.

Never disassemble.

Never throw the battery into fire and/or water.

Never deform or crush.

Replacing the transmitter battery

1. Unfold the key (page 3-2).

2. Insert a screwdriver into the slot and push the tab to remove the key from the transmitter.

Tab

3. Insert a screwdriver into the slot and gently pry open the transmitter.

4. Remove the battery.

3-5

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page74

Monday, June 18 2012 1:48 PM

Black plate (74,1)

Knowing Your Mazda

Doors and Locks

5. Put in the new battery (CR1620 or equivalent) with the positive pole ( ) facing down.

6. Align the front and back covers and snap the transmitter shut.

7. Align the key with the transmitter as shown in the figure, and insert the key until a click sound is heard.

Service

If you have a problem with the keyless entry system, consult an Authorized

Mazda Dealer.

If your transmitter is lost or stolen, consult an Authorized Mazda Dealer as soon as possible for a replacement and to make the lost or stolen transmitter inoperative.

CAUTION

Radio equipment like this is governed by laws in the United States.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

CAUTION

Insert the key into the transmitter securely until a click sound is heard.

If it is not inserted securely, it could detach from the transmitter.

3-6

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page75

Monday, June 18 2012 1:48 PM

Black plate (75,1)

Knowing Your Mazda

Doors and Locks

Door Locks

WARNING

Always take all children and pets with you or leave a responsible person with them:

Leaving a child or a pet unattended in a parked vehicle is dangerous. In hot weather, temperatures inside a vehicle can become high enough to cause brain damage or even death.

Do not leave the key in your vehicle with children and keep them in a place where your children will not find or play with them:

Leaving children in a vehicle with the key is dangerous. This could result in someone being badly injured or even killed.

Keep all doors locked when driving:

Unlocked doors in a moving vehicle are dangerous. Passengers can fall out if a door is accidentally opened and can more easily be thrown out in an accident.

Always close all the windows, lock the doors and take the key with you when leaving your vehicle unattended:

Leaving your vehicle unlocked is dangerous as children could lock themselves in a hot vehicle, which could result in death. Also, a vehicle left unlocked becomes an easy target for thieves and intruders.

After closing the doors, always verify that they are securely closed:

Doors not securely closed are dangerous, if the vehicle is driven with a door not securely closed, the door could open unexpectedly resulting in an accident.

Always confirm the safety around the vehicle before opening a door:

Suddenly opening a door is dangerous. A passing vehicle or a pedestrian could be hit and cause an accident.

Locking, Unlocking with Key

The driver's door can be locked/unlocked with the key.

Turn the key toward the front to lock, toward the back to unlock.

Lock

Unlock

NOTE

If your vehicle is equipped with a front passenger door key cylinder, the door can be locked/unlocked with the key.

Locking, Unlocking with Transmitter

The doors can be locked/unlocked by operating the keyless entry system transmitter, refer to Keyless Entry System

(page 3-3).

3-7

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page76

Monday, June 18 2012 1:48 PM

Black plate (76,1)

Knowing Your Mazda

Doors and Locks q

Locking, Unlocking with Door-

Lock Knob

To lock any door from the inside, press the door-lock knob.

To unlock, pull it outward.

This does not operate the other door locks.

Lock

NOTE l l l l

When locking the doors this way, be careful not to leave the key inside the vehicle.

The driver's door cannot be locked using the door-lock knob from the outside if the l key is in the ignition switch.

(Without keyless entry system)

The front door lock knob cannot be used while the front door is open.

The front door can only be locked from the outside using the key.

The red indication can be seen when the door-lock knob is unlocked.

Unlock

Red indication

To lock any door with the door-lock knob from the outside, press the door-lock knob to the lock position and close the door

(holding the door handle pulled is not required).

This does not operate the other door locks.

Door-lock knob q

Power Door Locks

Vehicle lock-out prevention

The vehicle lock-out prevention feature prevents you from locking yourself out of the vehicle. With the key in the ignition switch, all doors and the liftgate will automatically unlock if they are locked using the power door locks with any door or the liftgate open.

3-8

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page77

Monday, June 18 2012 1:48 PM

Black plate (77,1)

Knowing Your Mazda

Doors and Locks

Locking, unlocking with key

All doors and the liftgate lock automatically when the driver's door is locked with the key.

All doors and the liftgate unlock when the driver's door is unlocked and the key is held in the unlock position for one second or longer.

Locking, unlocking with door-lock switch

All doors and the liftgate lock automatically when lock side is pressed.

They all unlock when unlock side is pressed.

Lock

Unlock

Lock

NOTE

Holding the key in the unlocked position in the driver's door lock for about a second unlocks all doors and the liftgate. To unlock only the driver's door, insert the key into the driver's door lock and turn the key briefly to the unlock position and then immediately return it to the center position.

Locking, unlocking with transmitter

(with retractable type key)

All doors and the liftgate can be locked/ unlocked by operating the keyless entry system transmitter, refer to Keyless Entry

System (page 3-3).

3-9

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page78

Monday, June 18 2012 1:48 PM

Black plate (78,1)

Knowing Your Mazda

Doors and Locks q

Rear Door Child Safety Locks

These locks are intended to help prevent children from accidentally opening the rear doors. Use them both whenever a child rides in the vehicle.

If you slide the child safety lock to the lock position before closing that door, the door cannot be opened from the inside.

The door can be opened only by pulling the outside handle.

Unlock

Lock

Liftgate

WARNING

Never allow a person to ride in the luggage compartment:

Allowing a person to ride in the luggage compartment is dangerous.

The person in the luggage compartment could be seriously injured or killed during sudden braking or a collision.

Do not drive with the liftgate open:

Exhaust gas in the cabin of a vehicle is dangerous. An open liftgate in a moving vehicle will cause exhaust gas to be drawn into the cabin. This gas contains CO (carbon monoxide), which is colorless, odorless, and highly poisonous, and it can cause loss of consciousness and death.

Moreover, an open liftgate could cause occupants to fall out in an accident.

3-10

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page79

Monday, June 18 2012 1:48 PM

Black plate (79,1)

Knowing Your Mazda

Doors and Locks

CAUTION

Be careful not to apply excessive force to the damper stay on the liftgate such as by putting your hand on the stay. Otherwise, the damper stay may bend and affect the liftgate operation.

Opening and Closing the Liftgate

Opening the liftgate

Grasp the lower end of the liftgate, press the electric liftgate opener on the liftgate, and then raise the liftgate when the latch releases.

Damper stay q

Locking, Unlocking with Key

The liftgate can be locked/unlocked by inserting the key into the driver's door key cylinder, refer to Power Door Locks (page

3-8).

Locking, Unlocking with Transmitter

(with Retractable Type Key)

The liftgate can be locked/unlocked by operating the keyless entry system transmitter, refer to Keyless Entry System

(page 3-3).

Locking, Unlocking with Door-

Lock Switch

The liftgate can be locked/unlocked by operating the door-lock switch, refer to

Power Door Locks (page 3-8).

Electric liftgate opener

While the ignition is switched ON, the liftgate can be opened only when the vehicle is stopped with the parking brake applied (manual transaxle), or with the selector lever in the P position (automatic transaxle).

3-11

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page80

Monday, June 18 2012 1:48 PM

Black plate (80,1)

Knowing Your Mazda

Doors and Locks

NOTE l

When the liftgate is unlocked by pressing the electric liftgate opener button, the liftgate raises slightly to allow it to be opened. If the liftgate is not operated for a certain period of time after the electric liftgate opener button has been pressed, the liftgate cannot be raised any more from its slightly raised position. Press the electric liftgate opener button again to fully open the liftgate. To close the liftgate from its slightly raised position, open it first by pressing the electric liftgate opener button l and wait for 1 second or longer, then close it.

The door-ajar warning light will illuminate if the liftgate is not fully closed.

The sound of the latch may be heard for a few seconds after the electric liftgate opener has been pressed, however, this does not indicate a malfunction.

When the liftgate cannot be opened

If the vehicle battery is dead or there is a malfunction in the electrical system and the liftgate cannot be unlocked, perform the following procedure as an emergency measure to unlock it:

CAUTION

Perform the procedure using a cloth to cover sharp edges which could injure your hands.

Perform the procedure carefully when using a flathead screwdriver as it could cause damage to the surrounding area or vehicle parts.

Lever

1. Fold down the rear seatbacks.

Refer to Split-Folding Rear Seatback on page 2-5.

3-12

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page81

Monday, June 18 2012 1:48 PM

Black plate (81,1)

Knowing Your Mazda

Doors and Locks

2. Pull the center section of the plastic fastener and remove the fasteners, then remove cover on the interior surface of the liftgate.

Removal

Do not slam it. Pull up on the liftgate to make sure it is secure.

Liftgate grip recess

3. Turn the lever to the right to unlock the liftgate.

Cloth

Lever

After performing this emergency measure, have the vehicle inspected at an

Authorized Mazda Dealer as soon as possible.

Closing the liftgate

To close, lower the liftgate slowly using the liftgate grip recess, and then push the liftgate closed using both hands.

Luggage Compartment

WARNING

Do not place anything on top of the cover:

Placing luggage or other cargo on top of the luggage compartment cover is dangerous. During sudden braking or a collision, the cargo could become a projectile that could hit and injure someone. The vehicle has a light weight luggage compartment cover to keep the contents of your luggage area out of sight; it will not retain heavy objects that are not tied down in an accident such as a rollover. Tie down all heavy objects, whether luggage or cargo, using the tie down hooks.

Make sure luggage and cargo are secured before driving:

Not securing cargo while driving is dangerous as it could move or be crushed during sudden braking or a collision and cause injury.

3-13

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page82

Monday, June 18 2012 1:48 PM

Black plate (82,1)

Knowing Your Mazda

Doors and Locks

CAUTION

Make sure the luggage compartment cover is firmly secured. If it is not firmly secured, it could unexpectedly disengage resulting in injury.

Do not place heavy objects or apply excessive force to the top of the luggage compartment cover

(Maximum weight:2 kg (4 lb)).

Overloading could cause deformation or damage to the luggage compartment cover. Also, the liftgate could drop unexpectedly if it is opened with heavy objects on the luggage compartment cover, resulting in injury.

Luggage compartment cover strap

The luggage compartment can be accessed by opening the liftgate when the straps are attached to the sides of the liftgate.

Hook

2. Lift the end of the luggage compartment cover a little, pull it outward, and remove it from the pins.

3. Lift the front end of the luggage compartment cover and remove it.

Strap

Luggage compartment cover

This cover can be removed for more room.

1. Remove the straps from the hooks.

3-14

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page83

Monday, June 18 2012 1:48 PM

Black plate (83,1)

Power Windows

The ignition must be switched ON for the power windows to operate.

WARNING

Make sure the opening is clear before closing a window:

Closing power windows are dangerous. A person's hands, head, or even neck could be caught by the window and result in serious injury or even death.

This warning applies especially to children.

Never allow children to play with power window switches:

Power window switches that are not locked with the power window lock switch would allow children to operate power windows unintentionally which could result in serious injury if a child's hands, head or neck becomes caught by the window.

CAUTION

To prevent burning out the fuse and damaging the power window system, do not open or close more than three windows at once.

Knowing Your Mazda

Doors and Locks q

Operating the Driver's Side

Power Window

Normal opening/closing

To open the window to the desired position, lightly hold down the switch.

To close the window to the desired position, lightly pull up the switch.

Master control switches

Driver's window

Auto-opening/closing

To fully open the window automatically, press the switch completely down, then release. The window will fully open automatically.

To fully close the window automatically, pull the switch completely up, then release. The window will fully close automatically.

To stop the window partway, pull or press the switch in the opposite direction and then release it.

3-15

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page84

Monday, June 18 2012 1:48 PM

Black plate (84,1)

Knowing Your Mazda

Doors and Locks

Power window system initialization procedure

If the battery was disconnected during vehicle maintenance, or for other reasons

(such as a switch continues to be operated after the window is fully open/closed), the window will not fully open and close automatically. Carry out the following procedure to resume operation:

1. Switch the ignition ON.

2. Press the switch and fully open the window.

3. Pull up the switch to fully close the window and continue holding the switch for about 2 seconds after the window fully closes.

Two-step down function

With the window completely closed, press the switch lightly and the window will open and stop about 3 cm (1 in) from the top.

If you continue to press and hold the switch, the window will resume opening all the way.

NOTE l l l

Pressing the power window switch once when the window is fully closed will only open it about 3 cm (1 in) to allow convenient ventilation of the cabin.

The range in which the window opens can be changed.

Refer to Personalization Features on page

10-8.

The two-step down function can be canceled.

Refer to Personalization Features on page

10-8.

Jam-safe window

If a person's hands, head or an object blocks the window during the autoclosing operation, the window will stop and open halfway.

WARNING

Make sure nothing blocks the window just before it reaches the fully closed position or while holding up the power window switch:

Blocking the power window just before it reaches the fully closed position or while holding up the power window switch is dangerous.

In this case, the jam-safe function cannot prevent the window from closing all the way. If fingers are caught, serious injuries could occur.

NOTE

Depending on driving conditions, a closing power window could stop and start opening when the window feels a shock that is similar to something blocking it.

In the event the jam-safe function activates and the power window cannot be closed automatically, pull and hold the switch and the window will close.

Engine-off power window operation

The power window can be operated for about 40 seconds after the ignition is switched from ON to ACC or OFF with all doors closed. If any door is opened, the power window will be inoperable.

NOTE l

For engine-off operation of the power window, the switch must be held up firmly throughout window closure because the auto-closing function will be inoperable.

The two-step down function is inoperable during engine-off operation.

3-16

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page85

Monday, June 18 2012 1:48 PM

Black plate (85,1) q

Operating the Passenger Power

Windows

The power window may be operated when the power window lock switch on the driver's door is in the unlocked position.

The passenger window may be opened or closed using the master control switches on the driver's door.

Master control switches

Knowing Your Mazda

Doors and Locks q

Power Window Lock Switch

This feature prevents all power windows from operating, except the driver's power window. Keep this switch in the locked position while children are in the vehicle.

Locked position (button depressed):

Only the driver's power window can be operated.

Unlocked position (button not depressed):

All power windows on each door can be operated.

Locked position

Left rear window

Power window lock switch

Front passenger's window

Right rear window

To open the window to the desired position, hold down the switch.

To close the window to the desired position, pull up the switch.

Open

Unlocked position

NOTE

When the power window lock switch is in the locked position, the light on each power window switch, except for the driver's power window switch, turns off. The light may be difficult to see depending on the surrounding brightness.

3-17

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page86

Monday, June 18 2012 1:48 PM

Black plate (86,1)

Knowing Your Mazda

Doors and Locks

Fuel-Filler Lid and Cap

WARNING

When removing the fuel-filler cap, loosen the cap slightly and wait for any hissing to stop. Then remove it:

Fuel spray is dangerous. Fuel can burn skin and eyes and cause illness if ingested. Fuel spray is released when there is pressure in the fuel tank and the fuel-filler cap is removed too quickly.

Before refueling, stop the engine, and always keep sparks and flames away from the filler neck:

Fuel vapor is dangerous. It could be ignited by sparks or flames causing serious burns and injuries.

Additionally, use of the incorrect fuelfiller cap or not using a fuel-filler cap may result in fuel leak, which could result in serious burns or death in an accident.

CAUTION

Always use only a genuine Mazda fuel-filler cap or an approved equivalent, available at an

Authorized Mazda Dealer. The wrong cap can result in a serious malfunction of the fuel and emission control systems. It may also cause the check engine light in the instrument cluster to illuminate.

Fuel-Filler Lid

To open, pull up the remote fuel-filler lid release.

Remote fuelfiller lid release q

Fuel-Filler Cap

To remove the fuel-filler cap, turn it counterclockwise.

Attach the removed cap to the inner side of the fuel lid.

To close the fuel-filler cap, turn it clockwise until a click is heard.

Open

3-18

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page87

Monday, June 18 2012 1:48 PM

Black plate (87,1)

Knowing Your Mazda

Doors and Locks

CAUTION

If the check fuel cap warning light illuminates, the fuel-filler cap may not be properly installed. If the warning light illuminates, park your vehicle safely off the right-of-way, remove the fuel-filler cap and reinstall it correctly. After the cap has been correctly installed, the fuel cap warning light may continue to illuminate until a number of driving cycles have been completed. A drive cycle consists of starting the engine

(after four or more hours with the engine off) and driving the vehicle on city and highway roads.

Continuing to drive with the check fuel cap warning light illuminated could cause the check engine light to illuminate as well.

Hood

WARNING

Always check that the hood is closed and securely locked:

A hood that is not closed and securely locked is dangerous as it could fly open while the vehicle is moving and block the driver's vision which could result in a serious accident.

Opening the Hood

1. With the vehicle parked, pull the release handle to unlock the hood.

2. Insert your hand into the hood opening, slide the hood latch lever, and lift the hood.

3-19

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page88

Monday, June 18 2012 1:48 PM

Black plate (88,1)

Knowing Your Mazda

Doors and Locks

3. Grasp the support rod in the padded area and secure it in the support rod hole indicated by the arrow to hold the hood open.

Closing the Hood

1. Check under the hood area to make certain all filler caps are in place and all loose items (e.g. tools, oil containers, etc.) have been removed.

2. Lift the hood, grasp the padded area on the support rod, and secure the support rod in the clip. Verify that the support rod is secured in the clip before closing the hood.

3-20

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page89

Monday, June 18 2012 1:48 PM

3. Lower the hood slowly until it rests in the unlocked position, and then remove your hands. Push the front center edge of the hood downward until a latching sound is heard, and the hood closes completely.

Black plate (89,1)

Knowing Your Mazda

Doors and Locks

Downloaded from

Form No.8CL7-EA-12H

3-21

Mazda2_8CL7-EA-12H_Edition1 Page90

Monday, June 18 2012 1:48 PM

Black plate (90,1)

Knowing Your Mazda

Security System

Immobilizer System

The immobilizer system allows the engine to start only with a key the system recognizes.

If someone attempts to start the engine with an unrecognized key, the engine will not start, thereby helping to prevent the theft of your vehicle.

If you have a problem with the immobilizer system or the key, consult an

Authorized Mazda Dealer.

CAUTION

Radio equipment like this is governed by laws in the United

States.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

To avoid damage to the key, do not:

Drop the key.

Get the key wet.

Expose the key to any kind of

Ø magnetic field.

Expose the key to high temperatures on places such as the dashboard or hood, under direct sunlight.

CAUTION

When starting the engine do not allow the following, as the engine may not start due to the electronic signal from the ignition key not being transmitted correctly.

A key ring rests on the key grip.

Metal parts of other keys or metal objects touch the key grip.

Spare keys or keys for other vehicles equipped with an immobilizer system touch or come near the key grip.

Devices for electronic purchases, or security passage which touch or come near the key.

3-22

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page91

Monday, June 18 2012 1:48 PM

Black plate (91,1)

Knowing Your Mazda

Security System

NOTE l

(U.S.A.)

This device complies with Part 15 of the

l l l l

(CANADA)

This device complies with RSS-210 of

The keys carry a unique electronic code.

For this reason, and to assure your safety, obtaining a replacement key requires some waiting time. They are only available through an Authorized Mazda Dealer.

Always keep a spare key, in case one is lost.

If a key is lost, contact an Authorized

Mazda Dealer as soon as possible.

If you lose a key, an Authorized Mazda

Dealer will reset the electronic codes of your remaining keys and immobilizer system. Bring all the remaining keys to an

Authorized Mazda Dealer to reset.

Starting the vehicle with a key that has not been reset is not possible.

Operation

Arming

The system is armed when the ignition is switched from ON to ACC or OFF.

The security indicator light in the instrument cluster flashes every two seconds until the system is disarmed.

Disarming

The system is disarmed when the ignition is switched ON with the correct ignition key.

The security indicator light illuminates for about three seconds and goes out.

If the engine does not start with the correct ignition key, and the security indicator light keeps illuminating or flashing, the system may have a malfunction. Consult an Authorized

Mazda Dealer.

3-23

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page92

Monday, June 18 2012 1:48 PM

Knowing Your Mazda

Security System

NOTE l l

If the security indicator light illuminates and stays on or flashes when the ignition is switched ON, the engine will not start.

Signals from a TV or radio station, or from a transceiver or a mobile telephone, could interfere with your immobilizer system. If you are using the proper key and your engine fails to start, check the security indicator light. If it is flashing, remove the ignition key and wait 2 seconds or more, then reinsert it and try starting the engine again. If it does not start after 3 or more l l tries, contact an Authorized Mazda Dealer.

If the security indicator light flashes continuously while you are driving, do not shut off the engine. Go to an Authorized

Mazda Dealer and have it checked. If you shut off the engine while the light is flashing you will not be able to restart it.

Since the electronic codes are reset when repairing the immobilizer system, the keys are needed. Bring all the existing keys to an

Authorized Mazda Dealer.

Modification and Add-On

Equipment

Mazda cannot guarantee the immobilizer system's operation if the system has been modified or if any add-on equipment has been installed.

CAUTION

To avoid damage to your vehicle, do not modify the system or install any add-on equipment to the immobilizer system or the vehicle.

3-24

Downloaded from

Form No.8CL7-EA-12H

Black plate (92,1)

Mazda2_8CL7-EA-12H_Edition1 Page93

Monday, June 18 2012 1:48 PM

Black plate (93,1)

Knowing Your Mazda

Steering Wheel and Mirrors

Steering Wheel

WARNING

Never adjust the steering wheel while the vehicle is moving:

Adjusting the steering wheel while the vehicle is moving is dangerous.

Moving it can very easily cause the driver to abruptly turn to the left or right. This can lead to loss of control or an accident.

Tilt Steering Wheel

To change the angle of the steering wheel, stop the vehicle, pull the tilt wheel release lever under the steering column up, adjust the wheel, then push the release lever down to lock the column.

Tilt wheel release lever

After adjusting, push the wheel up and down to be certain it's locked before driving.

Mirrors

Outside Mirrors

Check the mirror angles before driving.

Mirror type

Flat type (driver's side)

Flat surface mirror.

Convex type (front passenger side)

The mirror has single curvature on its surface.

WARNING

Be sure to look over your shoulder before changing lanes:

Changing lanes without taking into account the actual distance of the vehicle in the convex mirror is dangerous. You could have a serious accident. What you see in the convex mirror is closer than it appears.

Power mirror

The ignition must be switched to ACC or

ON.

To adjust:

1. Press the left or right side of the selector switch to choose the left or right side mirror.

3-25

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page94

Monday, June 18 2012 1:48 PM

Black plate (94,1)

Knowing Your Mazda

Steering Wheel and Mirrors

2. Depress the mirror switch in the appropriate direction.

Mirror switch q

Rearview Mirror

Rearview mirror adjustment

Before driving, adjust the rearview mirror to center on the scene through the rear window.

Selector switch

Folding the mirror

Fold the outside mirror rearward until it is flush with the vehicle.

Reducing glare from headlights

Adjust the mirror with the day/night lever in the day position.

Push the lever forward for day driving.

Pull it back to reduce glare from headlights.

Day/Night lever

WARNING

Always return the outside mirrors to the driving position before you start driving:

Driving with the outside mirrors folded in is dangerous. Your rear view will be restricted, and you could have an accident.

Day

Night

3-26

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page95

Monday, June 18 2012 1:48 PM

WARNING

Do not stack cargo or objects higher than the seatbacks:

Cargo stacked higher than the seatbacks is dangerous. It can block your view in the rearview mirror, which might cause you to hit another car when changing lanes.

Black plate (95,1)

Knowing Your Mazda

Steering Wheel and Mirrors

Downloaded from

Form No.8CL7-EA-12H

3-27

Mazda2_8CL7-EA-12H_Edition1 Page96

Monday, June 18 2012 1:48 PM

Black plate (96,1)

3-28

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page97

Monday, June 18 2012 1:48 PM

Black plate (97,1)

Before Driving Your Mazda

Important information about driving your Mazda.

Fuel and Engine Exhaust Precautions ........................................ 4-2

Fuel Requirements .................................................................... 4-2

Emission Control System .......................................................... 4-3

Engine Exhaust (Carbon Monoxide) ......................................... 4-4

Before Starting the Engine ........................................................... 4-5

Before Getting In ...................................................................... 4-5

After Getting In ......................................................................... 4-5

Driving Tips ................................................................................... 4-6

Break-In Period ......................................................................... 4-6

Money-Saving Suggestions ...................................................... 4-6

Hazardous Driving .................................................................... 4-7

Floor Mat .................................................................................. 4-7

Rocking the Vehicle .................................................................. 4-8

Winter Driving .......................................................................... 4-8

Driving In Flooded Area ......................................................... 4-10

Overloading ............................................................................ 4-10

Driving on Uneven Road ........................................................ 4-11

Towing ......................................................................................... 4-12

Trailer Towing ......................................................................... 4-12

4-1

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page98

Monday, June 18 2012 1:48 PM

Black plate (98,1)

Before Driving Your Mazda

Fuel and Engine Exhaust Precautions

Fuel Requirements

Vehicles with catalytic converters or oxygen sensors must use ONLY UNLEADED FUEL, which will reduce exhaust emissions and keep spark plug fouling to a minimum.

Your Mazda will perform best with fuel listed in the table.

Fuel

Regular unleaded fuel

Octane Rating

(Anti-knock index)

87 [ (R+M)/2 method] or above (91 RON or above)

* U.S. federal law requires that octane ratings be posted on gasoline station pumps.

Fuel with a rating lower than 87 octane (91 RON) could cause the emission control system to lose effectiveness. It could also cause engine knocking and serious engine damage.

CAUTION

USE ONLY UNLEADED FUEL.

Leaded fuel is harmful to the catalytic converter and oxygen sensors and will lead to deterioration of the emission control system and or failures.

Your vehicle can only use oxygenated fuels containing no more than 10 % ethanol by volume. Damage to your vehicle may occur when ethanol exceeds this recommendation, or if the gasoline contains any methanol. Stop using gasohol of any kind if your vehicle engine is performing poorly.

Never add fuel system additives. Otherwise, the emission control system could be damaged. Consult an Authorized Mazda Dealer for details.

Gasoline blended with oxygenates such as alcohol or ether compounds are generally referred to as oxygenated fuels. The common gasoline blend that can be used with your vehicle is ethanol blended at no more than 10%. Gasoline containing alcohol, such as ethanol or methanol, may be marketed under the name

“

Gasohol

”

Vehicle damage and drivability problems resulting from the use of the following may not be covered by the Mazda warranty.

l l l

Gasohol containing more than 10% ethanol.

Gasoline or gasohol containing methanol.

Leaded fuel or leaded gasohol.

4-2

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page99

Monday, June 18 2012 1:48 PM

Black plate (99,1)

Before Driving Your Mazda

Fuel and Engine Exhaust Precautions

Emission Control System

Your vehicle is equipped with an emission control system (the catalytic converter is part of this system) that enables your vehicle to comply with existing exhaust emissions requirements.

WARNING

Never park over or near anything flammable:

Parking over or near anything flammable, such as dry grass, is dangerous. Even with the engine turned off, the exhaust system remains very hot after normal use and could ignite anything flammable. A resulting fire could cause serious injury or death.

CAUTION

Ignoring the following precautions could cause lead to accumulate on the catalyst inside the converter or cause the converter to get very hot. Either condition will damage the converter and cause poor performance.

USE ONLY UNLEADED FUEL.

Do not drive your Mazda with any sign of engine malfunction.

Do not coast with the ignition switched off.

Do not descend steep grades in gear with the ignition switched off.

Do not operate the engine at high idle for more than 5 minutes.

Do not tamper with the emission control system. All inspections and adjustments must be made by a qualified technician.

Do not push-start or pull-start your vehicle.

NOTE

Under U.S. federal law, any modification to the original-equipment emission control system before the first sale and registration of a vehicle is subject to penalties. In some states, such modification made on a used vehicle is also subject to penalties.

4-3

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page100

Monday, June 18 2012 1:48 PM

Black plate (100,1)

Before Driving Your Mazda

Fuel and Engine Exhaust Precautions

Engine Exhaust (Carbon Monoxide)

WARNING

Do not drive your vehicle if you smell exhaust gas inside the vehicle:

Engine exhaust gas is dangerous. This gas contains carbon monoxide (CO), which is colorless, odorless, and poisonous. When inhaled, it can cause loss of consciousness and death. If you smell exhaust gas inside your vehicle, keep all windows fully open and contact an Authorized Mazda Dealer immediately.

Do not run the engine when inside an enclosed area:

Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaust gas, which contains poisonous carbon monoxide, could easily enter the cabin. Loss of consciousness or even death could occur.

Open the windows or adjust the heating or cooling system to draw fresh air when idling the engine:

Exhaust gas is dangerous. When your vehicle is stopped with the windows closed and the engine running for a long time even in an open area, exhaust gas, which contains poisonous carbon monoxide, could enter the cabin. Loss of consciousness or even death could occur.

Clear snow from underneath and around your vehicle, particularly the tail pipe, before starting the engine:

Running the engine when a vehicle is stopped in deep snow is dangerous. The exhaust pipe could be blocked by the snow, allowing exhaust gas to enter the cabin.

Because exhaust gas contains poisonous carbon monoxide, it could cause loss of consciousness or even death to occupants in the cabin.

4-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page101

Monday, June 18 2012 1:48 PM

Black plate (101,1)

Before Driving Your Mazda

Before Starting the Engine

Before Getting In

l l l l

Be sure the windows, outside mirrors, and outside lights are clean.

Inspect inflation pressures and condition of tires.

Look under the vehicle for any sign of fluid leaks.

If you plan to back up, make sure nothing is in your way.

NOTE

Engine oil, engine coolant, brake/clutch fluid, washer fluid, and other fluid levels should be inspected. See Maintenance, Section 8.

After Getting In

Are all doors closed and locked?

l l l l l l

Is the seat adjusted properly?

Are the inside and outside mirrors adjusted?

Is the steering wheel adjusted properly?

Is everyone's seat belt fastened?

Check all gauges.

Check all warning lights when the ignition is switched ON.

Release the parking brake and make sure the brake warning light goes off.

Always be thoroughly familiar with your

Mazda.

Downloaded from

Form No.8CL7-EA-12H

4-5

Mazda2_8CL7-EA-12H_Edition1 Page102

Monday, June 18 2012 1:48 PM

Black plate (102,1)

Before Driving Your Mazda

Driving Tips

Break-In Period

No special break-in is necessary, but a few precautions in the first 1,000 km (600 miles) may add to the performance, economy, and life of your Mazda.

Do not race the engine.

l l

Do not maintain one constant speed, either slow or fast, for a long period of time.

Do not drive constantly at full-throttle l l or high engine rpm for extended periods of time.

Avoid unnecessary hard stops.

Avoid full-throttle starts.

Money-Saving Suggestions

How you operate your Mazda determines how far it will travel on a tank of fuel. Use these suggestions to help save money on fuel and repairs.

Avoid long warm-ups. Once the engine l l runs smoothly, begin driving.

Avoid fast starts.

Keep the engine tuned. Follow the maintenance schedule (page 8-4) and l l l have an Authorized Mazda Dealer perform inspections and servicing.

Use the air conditioner only when necessary.

Slow down on rough roads.

Keep the tires properly inflated.

l l l l l

Do not carry unnecessary weight.

Do not rest your foot on the brake pedal while driving.

Keep the wheels in correct alignment.

Keep windows closed at high speeds.

Slow down when driving in crosswinds and headwinds.

WARNING

Never stop the engine when going down a hill:

Stopping the engine when going down a hill is dangerous. This causes the loss of power steering and power brake control, and may cause damage to the drivetrain. Any loss of steering or braking control could cause an accident.

4-6

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page103

Monday, June 18 2012 1:48 PM

Black plate (103,1)

Before Driving Your Mazda

Driving Tips

Hazardous Driving

WARNING

Be extremely careful if it is necessary to downshift on slippery surfaces:

Downshifting into lower gear while driving on slippery surfaces is dangerous. The sudden change in tire speed could cause the tires to skid.

This could lead to loss of vehicle control and an accident.

Do not rely on ABS as a substitute for safe driving:

The ABS cannot compensate for unsafe and reckless driving, excessive speed, tailgating (following another vehicle too closely), driving on ice and snow, and hydroplaning (reduced tire friction and road contact because of water on the road surface). You can still have an accident.

When driving on ice or in water, snow, mud, sand, or similar hazards: l

Be cautious and allow extra distance for braking.

l l

Avoid sudden braking and sudden maneuvering.

Do not pump the brakes. Continue to press down on the brake pedal.

Refer to Anti-Lock Brake System

(ABS) on page 5-8.

l l

If you get stuck, select a lower gear and accelerate slowly. Do not spin the front wheels.

For more traction in starting on slippery surfaces such as ice or packed snow, use sand, rock salt, chains, carpeting, or other nonslip material under the front wheels.

NOTE

Use snow chains only on the front wheels.

Floor Mat

WARNING

Make sure the floor mats are hooked on the retention pins to prevent them from bunching up under the foot pedals:

Using a floor mat that is not secured is dangerous as it will interfere with the accelerator and brake pedal operation, which could result in an accident.

Do not install two floor mats, one on top of the other, on the driver's side:

Installing two floor mats, one on top of the other, on the driver's side is dangerous as the retention pins can only keep one floor mat from sliding forward.

In using a heavy duty floor mat for winter use always remove the original floor mat.

Loose floor mat(s) will interfere with the foot pedal and could result in an accident.

When setting a floor mat, position the floor mat so that its eyelets are inserted over the pointed end of the retention posts.

4-7

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page104

Monday, June 18 2012 1:48 PM

Black plate (104,1)

Before Driving Your Mazda

Driving Tips

Rocking the Vehicle

WARNING

Do not spin the wheels at more than 56 km/h (35 mph), and do not allow anyone to stand behind a wheel when pushing the vehicle:

When the vehicle is stuck, spinning the wheels at high speed is dangerous. The spinning tire could overheat and explode. This could cause serious injuries.

CAUTION

Too much rocking may cause engine overheating, transaxle failure, and tire damage.

If you must rock the vehicle to free it from snow, sand or mud, depress the accelerator slightly and slowly move the shift lever from 1 (D) to R.

Winter Driving

l l

Carry emergency gear, including tire chains, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt.

Ask an Authorized Mazda Dealer to perform the following precautions: l

Have the proper ratio of antifreeze in the radiator.

Refer to Engine Coolant on page 8-14.

l l l l

Inspect the battery and its cables. Cold reduces battery capacity.

Inspect the ignition system for damage and loose connections.

Use washer fluid made with antifreeze

― but do not use engine coolant antifreeze for washer fluid

(page 8-19).

Do not use the parking brake in freezing weather as it may freeze.

Instead, shift to P with an automatic l l l transaxle and to 1 or R with a manual transaxle. Block the rear wheels.

Snow left on the windshield is dangerous as it could obstruct vision.

Remove snow before driving.

Do not apply excessive force to a window scraper when removing ice or frozen snow on the mirror glass and windshield.

Never use warm or hot water for removing snow or ice from windows and mirrors as it could result in the glass cracking.

Braking performance can be adversely affected if snow or ice adheres to the brake equipment. If this situation occurs, drive the vehicle slowly, releasing the accelerator pedal and lightly applying the brakes several times until the brake performance returns to normal.

4-8

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page105

Monday, June 18 2012 1:48 PM

Black plate (105,1) q

Snow Tires

Use snow tires on all four wheels

Do not go faster than 120 km/h (75 mph) while driving with snow tires. Inflate snow tires 30 kPa (0.3 kgf/cm

, 4.3 psi) more than recommended on the tire pressure label (driver's door frame), but never more than the maximum cold-tire pressure shown on the tires.

Your vehicle is originally equipped with all season radials designed to be used all year around. In some extreme climates you may find it necessary to replace them with snow tires during the winter months to further improve traction on snow and ice covered roads.

WARNING

Use only the same size and type tires

(snow, radial, or non-radial) on all four wheels:

Using tires different in size or type is dangerous. Your vehicle's handling could be greatly affected and result in an accident.

CAUTION

Check local regulations before using studded tires.

NOTE

If your vehicle is equipped with the tire pressure monitoring system, the system may not function correctly when using tires with steel wire reinforcement in the sidewalls (page

5-27).

Before Driving Your Mazda

Driving Tips q

Tire Chains

Check local regulations before using tire chains.

CAUTION

Chains may affect handling.

Do not go faster than 50 km/h (30 mph) or the chain manufacturer's recommended limit, whichever is lower.

Drive carefully and avoid bumps, holes, and sharp turns.

Avoid locked-wheel braking.

Do not use chains on a temporary spare tire; it may result in damage to the vehicle and to the tire.

Do not use chains on roads that are free of snow or ice. The tires and chains could be damaged.

Chains may scratch or chip aluminum wheels.

NOTE

If your vehicle is equipped with the tire pressure monitoring system, the system may not function correctly when using tire chains.

Install the chains on the front tires.

Do not use chains on the rear tires.

Please consult an Authorized Mazda

Dealer.

Installing the chains

1. If your vehicle is equipped with wheel covers remove them, otherwise the chain bands will scratch them.

2. Secure the chains on the front tires as tightly as possible. Always follow the chain manufacturer's instructions.

3. Retighten the chains after driving 1/2

―

1 km (1/4

―

1/2 mile).

4-9

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page106

Monday, June 18 2012 1:48 PM

Black plate (106,1)

Before Driving Your Mazda

Driving Tips

Driving In Flooded Area

WARNING

Dry wet brakes by driving very slowly and applying the brakes lightly until brake performance returns to normal:

Driving with wet brakes is dangerous. Increased stopping distance or the vehicle pulling to one side when braking could result in a serious accident. Light braking will indicate whether the brakes have been affected.

CAUTION

Do not drive the vehicle on flooded roads as it could cause short circuiting of electrical/electronic parts, or engine damage or stalling from water absorption. If the vehicle has been immersed in water, consult an Authorized Mazda Dealer.

Overloading

WARNING

Be careful not to overload your vehicle:

The gross axle weight rating (GAWR) and the gross vehicle weight rating

(GVWR) of your vehicle are on the

Motor Vehicle Safety Standard Label on the driver's door frame. Exceeding these ratings can cause an accident or vehicle damage. You can estimate the weight of your load by weighing the items (or people) before putting them in the vehicle.

4-10

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page107

Monday, June 18 2012 1:48 PM

Black plate (107,1)

Before Driving Your Mazda

Driving Tips

Driving on Uneven Road

Your vehicle's suspension and underbody can be damaged if driven on rough/uneven roads or over speed bumps at excessive speeds. Use care and reduce speed when traveling on rough/uneven roads or over speed bumps.

Use care not to damage the vehicle's underbody, bumpers or muffler(s) when driving under the following conditions: l l

Ascending or descending a slope with a sharp transition angle

Ascending or descending a driveway or trailer ramp with a sharp transition angle

Your vehicle is equipped with low profile tires allowing class-leading performance and handling. As a result, the sidewall of the tires are very thin and the tires and wheels can be damaged if driven through potholes or on rough/uneven roads at excessive speeds. Use care and reduce speed when traveling on rough/uneven roads or through potholes.

4-11

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page108

Monday, June 18 2012 1:48 PM

Before Driving Your Mazda

Towing

Trailer Towing

The Mazda2 is not designed for towing.

Never tow a trailer with your Mazda2.

Black plate (108,1)

4-12

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page109

Monday, June 18 2012 1:48 PM

Black plate (109,1)

Driving Your Mazda

Explanation of instruments and controls.

Starting and Driving ..................................................................... 5-2

Ignition Switch .......................................................................... 5-2

Starting the Engine .................................................................... 5-3

Turning the Engine Off ............................................................. 5-4

Brake System ............................................................................ 5-5

Manual Transaxle Operation ................................................... 5-10

Automatic Transaxle Controls ................................................ 5-12

Power Steering ........................................................................ 5-15

Cruise Control

...................................................................... 5-16

Traction Control System (TCS) .............................................. 5-20

Dynamic Stability Control (DSC) ........................................... 5-21

Tire Pressure Monitoring System

......................................... 5-23

Instrument Cluster and Indicators ............................................ 5-29

Meters and Gauges .................................................................. 5-29

Warning/Indicator Lights and Beep Sounds ............................ 5-36

Warning/Indicator Lights ........................................................ 5-36

Beep Sounds ........................................................................... 5-48

Switches and Controls ................................................................ 5-50

Lighting Control ..................................................................... 5-50

Turn and Lane-Change Signals ............................................... 5-53

Fog Lights

............................................................................ 5-53

Windshield Wipers and Washer .............................................. 5-54

Rear Window Wiper and Washer ............................................ 5-57

Rear Window Defroster ........................................................... 5-58

Horn ........................................................................................ 5-59

Hazard Warning Flasher .......................................................... 5-59

Some models.

5-1

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page110

Monday, June 18 2012 1:48 PM

Black plate (110,1)

Driving Your Mazda

Starting and Driving

Ignition Switch

Ignition Switch Positions

OFF

The power supply to electrical devices is turned off. Only in this position can the key be removed.

WARNING

Do not stop the engine while the vehicle is moving:

Stopping the engine while the vehicle is moving for any reason other than in an emergency is dangerous.

Stopping the engine while the vehicle is moving will result in reduced braking ability due to the loss of power braking, which could cause an accident and serious injury.

Before leaving the driver's seat, always switch the ignition to OFF, set the parking brake and make sure the shift lever is in P (automatic transaxle) or in

1st gear or R (manual transaxle):

It is important to switch the ignition to OFF even if you are not removing the key from the ignition or leaving the vehicle. Leaving the key in other positions will disable some of the vehicle security systems and run the battery down.

Leaving the driver's seat without switching the ignition to OFF, setting the parking brake and shifting the shift lever to P (automatic transaxle) or to 1st gear or R (manual transaxle) is dangerous. Unexpected vehicle movement could occur. This could cause an accident.

ACC (Accessory)

In this position, some electrical accessories will operate.

This is the normal running position after the engine is started. Some indicator lights/warning lights should be inspected before the engine is started (page 5-36).

5-2

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page111

Monday, June 18 2012 1:48 PM

Black plate (111,1)

Driving Your Mazda

Starting and Driving

NOTE

When the ignition is switched ON, the sound of the fuel pump motor operating near the fuel tank can be heard. This does not indicate an abnormality.

START

The engine is started in this position. It will crank until you release the key. It then returns to the ON position.

Ignition Key Reminder

If the ignition is switched off or the ignition is switched to ACC with the key inserted, a continuous beep sound will be heard when the driver's door is opened.

Starting the Engine

NOTE

Engine-starting is controlled by the spark ignition system.

This system meets all Canadian Interference-

Causing Equipment Standard requirements regulating the impulse electrical field strength of radio noise.

1. Occupants should fasten their seat belts.

2. Make sure the parking brake is on.

3. Depress the brake pedal.

(Manual transaxle)

Depress the clutch pedal all the way and shift into neutral.

Keep the clutch pedal depressed while cranking the engine.

(Automatic transaxle)

Put the vehicle in park (P). If you must restart the engine while the vehicle is moving, shift into neutral (N).

NOTE

(Manual transaxle)

The starter will not operate unless the clutch is depressed sufficiently.

(Automatic transaxle)

The starter will not operate if the shift lever is not in P or N.

5. Switch the ignition to START and hold

(up to 10 seconds at a time) until the engine starts.

CAUTION

Do not try the starter for more than

10 seconds at a time. If the engine stalls or fails to start, wait 10 seconds before trying again. Otherwise, you may damage the starter and drain the battery.

5-3

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page112

Monday, June 18 2012 1:48 PM

Black plate (112,1)

Driving Your Mazda

Starting and Driving

6. After starting the engine, let it idle for about 10 seconds.

NOTE l

In extremely cold weather or after the vehicle has not been driven in several days, let the engine warm up without operating l l the accelerator.

Whether the engine is cold or warm, it should be started without use of the accelerator.

If the engine does not start the first time, refer to Starting a Flooded Engine under

Emergency Starting. If the engine still does not start, have your vehicle inspected by an

Authorized Mazda Dealer (page 7-17).

Turning the Engine Off

WARNING

Do not stop the engine while the vehicle is moving:

Stopping the engine while the vehicle is moving for any reason other than in an emergency is dangerous.

Stopping the engine while the vehicle is moving will result in reduced braking ability due to the loss of power braking, which could cause an accident and serious injury.

1. Stop the vehicle completely.

(Manual transaxle)

Shift into neutral.

(Automatic transaxle)

Shift the shift lever to the P position.

3. Switch the ignition from ON to OFF.

CAUTION

When leaving the vehicle, make sure the ignition is switched off.

5-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page113

Monday, June 18 2012 1:48 PM

Black plate (113,1)

Brake System

Foot Brake

Your Mazda has power-assisted brakes that adjust automatically through normal use.

Should power-assist fail, you can stop by applying greater force than normal to the brake pedal. But the distance required to stop will be greater than usual.

Driving Your Mazda

Starting and Driving

WARNING

Do not coast with the engine stalled or turned off, find a safe place to stop:

Coasting with the engine stalled or turned off is dangerous. Braking will require more effort, and the brake's power-assist could be depleted if you pump the brake. This will cause longer stopping distances or even an accident.

Shift to a lower gear when going down steep hills:

Driving with your foot continuously on the brake pedal or steadily applying the brakes for long distances is dangerous. This causes overheated brakes, resulting in longer stopping distances or even total brake failure. This could cause loss of vehicle control and a serious accident. Avoid continuous application of the brakes.

Dry off brakes that have become wet by driving slowly, releasing the accelerator pedal and lightly applying the brakes several times until the brake performance returns to normal:

5-5

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page114

Monday, June 18 2012 1:48 PM

Black plate (114,1)

Driving Your Mazda

Starting and Driving

CAUTION

Do not drive with your foot held on the clutch pedal or brake pedal, or hold the clutch pedal depressed halfway unnecessarily. Doing so could result in the following:

The clutch and brake parts will

Ø wear out more quickly.

The brakes can overheat and adversely affect brake performance.

Always depress the brake pedal with the right foot. Applying the brakes with the unaccustomed left foot could slow your reaction time to an emergency situation resulting in insufficient braking operation.

Wear shoes appropriate for driving in order to avoid your shoe contacting the brake pedal when depressing the accelerator pedal.

Parking Brake

WARNING

Before leaving the driver's seat, always switch the ignition to OFF, set the parking brake and make sure the shift lever is in P (automatic transaxle) or in

1st gear or R (manual transaxle):

CAUTION

Driving with the parking brake on will cause excessive wear of the brake linings or pads.

NOTE

For parking in snow, refer to Winter Driving

(page 4-8) regarding parking brake use.

5-6

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page115

Monday, June 18 2012 1:48 PM

Black plate (115,1)

Setting the parking brake

Depress the brake pedal and then firmly pull the parking brake lever fully upwards with sufficient force to hold the vehicle in a stationary position.

Driving Your Mazda

Starting and Driving q

Brake System Warning Light

Releasing the parking brake

Depress the brake pedal and pull the parking brake lever upwards, then press the release button. While holding the button, lower the parking brake lever all the way down to the released position.

This warning has the following functions:

Parking brake warning

The light illuminates when the parking brake is applied with the ignition switched to START or ON. It turns off when the parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brake is fully released, you may have a brake problem.

Drive to the side of the road and park off the right-of-way.

You may notice that the pedal is harder to depress or that it may go closer to the floor. In either case, it will take longer to stop the vehicle.

1. With the engine stopped, open the hood and check the brake fluid level immediately, and then add fluid if required (page 8-16).

2. After adding fluid, check the light again.

If the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have it towed to an

Authorized Mazda Dealer.

Even if the light turns off, have your brake system inspected as soon as possible by an Authorized Mazda Dealer.

5-7

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page116

Monday, June 18 2012 1:48 PM

Black plate (116,1)

Driving Your Mazda

Starting and Driving

NOTE

Having to add brake fluid is sometimes an indicator of leakage. Consult an Authorized

Mazda Dealer as soon as possible even if the brake light is no longer illuminated.

WARNING

Do not drive with the brake system warning light illuminated. Contact an

Authorized Mazda Dealer to have the brakes inspected as soon as possible:

Driving with the brake system warning light illuminated is dangerous. It indicates that your brakes may not work at all or that they could completely fail at any time. If this light remains illuminated, after checking that the parking brake is fully released, have the brakes inspected immediately.

Anti-Lock Brake System (ABS)

The ABS control unit continuously monitors the speed of each wheel. If one wheel is about to lock up, the ABS responds by automatically releasing and reapplying that wheel's brake.

The driver will feel a slight vibration in the brake pedal and may hear a chattering noise from the brake system. This is normal ABS system operation. Continue to depress the brake pedal without pumping the brakes.

WARNING

Do not rely on ABS as a substitute for safe driving:

NOTE l

Braking distances may be longer on loose surfaces (snow or gravel, for example) l which usually have a hard foundation. A vehicle with a normal braking system may require less distance to stop under these conditions because the tires will build up a wedge of surface layer when the wheels skid.

The sound of the ABS operating may be heard when starting the engine or immediately after starting the vehicle, however, it does not indicate a malfunction.

ABS Warning Light

The warning light stays on for a few seconds when the ignition is switched

ON.

5-8

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page117

Monday, June 18 2012 1:48 PM

Black plate (117,1)

Driving Your Mazda

Starting and Driving

If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.

Should this happen, consult an Authorized

Mazda Dealer as soon as possible.

NOTE l

When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS warning light may illuminate. If this occurs, it is the result of the weak battery and does not indicate an ABS malfunction.

Recharge the battery.

The brake assist system does not operate while the ABS warning light is illuminated.

Electronic Brake Force

Distribution System Warning

If the electronic brake force distribution control unit determines that some components are operating incorrectly, the control unit may illuminate the brake system warning light and the ABS warning light on simultaneously. The problem is likely to be the electronic brake force distribution system.

WARNING

Do not drive with both the ABS warning light and brake warning light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible:

Driving when the brake system warning light and ABS warning light are illuminated simultaneously is dangerous.

When both lights are illuminated, the rear wheels could lock more quickly in an emergency stop than under normal circumstances.

Brake Assist

During emergency braking situations when it is necessary to depress the brake pedal with greater force, the brake assist system provides braking assistance, thus enhancing braking performance.

When the brake pedal is depressed hard or depressed more quickly, the brakes apply more firmly.

NOTE l

When the brake pedal is depressed hard or depressed more quickly, the pedal will feel softer but the brakes will apply more firmly.

l l

This is a normal effect of the brake assist operation and does not indicate a malfunction.

When the brake pedal is depressed hard or depressed more quickly, a motor/pump operation noise may be heard. This is a normal effect of the brake assist and does not indicate a malfunction.

The brake assist equipment does not supersede the functionality of the vehicle's main braking system.

5-9

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page118

Monday, June 18 2012 1:48 PM

Black plate (118,1)

Driving Your Mazda

Starting and Driving q

Brake Pad Wear Indicator

When the disc brake pads become worn, the built-in wear indicators contact the disc plates. This causes a loud screeching noise to warn that the pads should be replaced.

Manual Transaxle Operation

Manual Transaxle Shift Pattern

Neutral position

When you hear this noise, consult an

Authorized Mazda Dealer as soon as possible.

WARNING

Do not drive with worn disc pads:

Driving with worn disc pads is dangerous. The brakes could fail and cause a serious accident. As soon as you hear a screeching noise consult an Authorized Mazda Dealer.

The shift pattern of the transaxle is conventional, as shown.

Depress the clutch pedal all the way down while shifting; then release it slowly.

A safety feature prevents accidental shifting from 5 to R (reverse). The shift lever must be put in neutral before being shifted to R.

5-10

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page119

Monday, June 18 2012 1:48 PM

Black plate (119,1)

WARNING

Do not use sudden engine braking on slippery road surfaces or at high speeds:

Shifting down while driving on wet, snowy, or frozen roads, or while driving at high speeds causes sudden engine braking, which is dangerous.

The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident.

Be sure to leave the shift lever in 1 or R position and set the parking brake when leaving the vehicle unattended:

Otherwise the vehicle could move and cause an accident.

CAUTION

Keep your foot off the clutch pedal except when shifting gears. Also, do not use the clutch to hold the vehicle on an upgrade. Riding the clutch will cause needless clutch wear and damage.

Do not apply any excessive lateral force to the gear lever when changing from 5th to 4th gear.

This could lead to the accidental selection of 2nd gear, which can result in damage to the transaxle.

Make sure the vehicle comes to a complete stop before shifting to R.

Shifting to R while the vehicle is still moving may damage the transaxle.

NOTE

If shifting to R is difficult, shift back into neutral, release the clutch pedal, and try again.

Driving Your Mazda

Starting and Driving q

Recommendations for Shifting

Upshifting

For normal acceleration, we recommend these shift points.

1 to 2

2 to 3

3 to 4

4 to 5

Gear

For cruising

1 to 2

2 to 3

3 to 4

4 to 5

Gear

Vehicle speed

21 km/h (13 mph)

39 km/h (24 mph)

55 km/h (34 mph)

78 km/h (49 mph)

Vehicle speed

18 km/h (11 mph)

29 km/h (18 mph)

47 km/h (29 mph)

68 km/h (42 mph)

Downshifting

When you must slow down in heavy traffic or on a steep upgrade

, downshift before the engine starts to overwork. This reduces the chance of stalling and gives better acceleration when you need more speed.

On a steep downgrade , downshifting helps maintain safe speed and prolongs brake life.

5-11

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page120

Monday, June 18 2012 1:48 PM

Driving Your Mazda

Starting and Driving

Automatic Transaxle Controls

Lock-release button

Black plate (120,1)

Various Lockouts:

Indicates that you must depress the brake pedal and hold in the lock-release button to shift (The ignition must be switched ACC or ON).

Indicates the shift lever can be shifted freely into any position.

Indicates that you must hold in the lock-release button to shift.

Transaxle Ranges

The shift lever must be in P or N to operate the starter.

P (Park)

P locks the transaxle and prevents the front wheels from rotating.

WARNING

Always set the shift lever to P and set the parking brake:

Only setting the shift lever to the P position without using the parking brake to hold the vehicle is dangerous. If P fails to hold, the vehicle could move and cause an accident.

CAUTION

Shifting into P, N or R while the vehicle is moving can damage your transaxle.

Shifting into a driving gear or reverse when the engine is running faster than idle can damage the transaxle.

R (Reverse)

In position R, the vehicle moves only backward. You must be at a complete stop before shifting to or from R, except under rare circumstances as explained in

Rocking the Vehicle (page 4-8).

5-12

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page121

Monday, June 18 2012 1:48 PM

Black plate (121,1)

Driving Your Mazda

Starting and Driving

N (Neutral)

In N, the wheels and transaxle are not locked. The vehicle will roll freely even on the slightest incline unless the parking brake or brakes are on.

WARNING

If the engine is running faster than idle, do not shift from N or P into a driving gear:

It's dangerous to shift from N or P into a driving gear when the engine is running faster than idle. If this is done, the vehicle could move suddenly, causing an accident or serious injury.

Do not shift into N when driving the vehicle:

Shifting into N while driving is dangerous. Engine braking cannot be applied when decelerating which could lead to an accident or serious injury.

CAUTION

Do not shift into N when driving the vehicle. Doing so can cause transaxle damage.

NOTE

Apply the parking brake or depress the brake pedal before moving the shift lever from N to prevent the vehicle from moving unexpectedly.

D (Drive)

D is the normal driving position. From a stop, the transaxle will automatically shift through a 4-gear sequence.

2 (Second)

The 2 position is helpful when driving in heavy, slow-moving traffic and climbing hills, for engine braking assist when going down hills, or for starting on slick surfaces and other situations where gentle acceleration may be necessary.

Do not exceed 98 km/h (60 mph) in the 2 position.

1 (Low)

Use the 1 position for maximum power in hard-pulling situations, or for climbing and descending very steep grades.

Do not exceed 43 km/h (26 mph) in the 1 position.

WARNING

Do not use sudden engine braking on slippery road surfaces or at high speeds:

Shifting down while driving on wet, snowy, or frozen roads, or while driving at high speeds causes sudden engine braking, which is dangerous.

The sudden change in tire speed could cause the tires to skid. This could lead to loss of vehicle control and an accident.

Shift-Lock System

The shift-lock system prevents shifting out of P unless the brake pedal is depressed.

To shift from P:

1. Depress and hold the brake pedal.

2. Start the engine.

3. Press and hold the lock-release button.

4. Move the shift lever.

5-13

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page122

Monday, June 18 2012 1:48 PM

Black plate (122,1)

Driving Your Mazda

Starting and Driving

NOTE l l

When the ignition is switched off, the shift lever cannot be shifted from P.

To be sure the vehicle is in park, the ignition key cannot be removed unless the shift lever is in P.

Overdrive

Overdrive operation

In D, the transaxle automatically shifts to overdrive, which improves fuel economy and reduces noise.

To allow engine braking when going down a steep grade, make sure the overdrive button is in the off position.

To turn it on, push the button again.

Shift patterns with overdrive:

D = 1st, 2nd, 3rd, 4th

2 = 2nd

1 = 1st

O/D OFF indicator light

Overdrive button

And for a smoother ride with less shifting, don't use it when: l l

Going up a steep grade.

Driving in stop-and-go traffic.

Pulling heavy loads.

To turn off the overdrive, push the button.

The transaxle will then shift through a 3gear sequence in D.

Shift patterns without overdrive:

D = 1st, 2nd, 3rd

2 = 2nd

1 = 1st

5-14

This light illuminates when the overdrive has been turned off.

CAUTION

If the overdrive-off indicator light flashes, the transaxle has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transaxle. Consult an Authorized

Mazda Dealer as soon as possible.

Driving Tips

WARNING

Do not allow the vehicle to move in reverse on an up-slope while the selector lever is in a forward gear position, or move forward on a downslope while the selector lever is in the reverse position.

Otherwise, the engine will stop, causing the loss of the power brake and power steering functions, and make it difficult to control the vehicle which could result in an accident.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page123

Monday, June 18 2012 1:48 PM

Black plate (123,1)

Driving Your Mazda

Starting and Driving

Passing

For extra power when passing another vehicle or climbing steep grades, depress the accelerator fully. The transaxle will shift to a lower gear, depending on vehicle speed.

Climbing steep grades from a stop

To climb a steep grade from a stopped position:

1. Depress the brake pedal.

2. Shift to D or 1, depending on the load weight and grade steepness.

3. Release the brake pedal while gradually accelerating.

Descending steep grades

When descending a steep grade, shift to 2 or 1, depending on load weight and grade steepness. Descend slowly, using the brakes only occasionally to prevent them from overheating.

Power Steering

Power steering is only operable when the engine is running. If the engine is off or if the power steering system is inoperable, you can still steer, but it requires more physical effort.

If the steering feels stiffer than usual during normal driving, consult an

Authorized Mazda Dealer.

Power Steering Malfunction

Indicator Light

This indicator light illuminates or flashes when the ignition is switched ON, and turns off when the engine is started.

If the light remains illuminated or flashing after the engine is started, or illuminates while driving, turn off the engine after parking in a safe place, and then start the engine again.

If the light does not illuminate after restarting the engine, this indicates that the power steering is restored and normal steering is possible.

If the light remains illuminated, the power steering is still inoperable. Consult an

Authorized Mazda Dealer.

5-15

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page124

Monday, June 18 2012 1:48 PM

Black plate (124,1)

Driving Your Mazda

Starting and Driving

NOTE l l

The power steering system is inoperable when the power steering malfunction indicator light illuminates or flashes.

Steering is possible, but requires more physical effort.

Repeatedly jerking the steering wheel left and right while the vehicle is stopped or moving at slow speeds will cause the power steering system to go into protective mode which will make the steering feel heavy, but this does not indicate a malfunction. If this occurs, park the vehicle safely and wait a few minutes for the system to return to normal.

Cruise Control

With cruise control, you can set and automatically maintain any speed of more than about 30 km/h (19 mph).

WARNING

Do not use the cruise control under the following conditions:

Using the cruise control under the following conditions is dangerous and could result in loss of vehicle control.

Hilly terrain

Steep inclines

Heavy or unsteady traffic

Slippery or winding roads

Similar restrictions that require inconsistent speed q

Cruise Main Indicator Light

(Amber)/Cruise Set Indicator

Light (Green)

The indicator light has two colors.

Cruise Main Indicator Light (Amber)

The indicator light illuminates amber when the ON switch is pressed and the cruise control system is activated.

Cruise Set Indicator Light (Green)

The indicator light illuminates green when a cruising speed has been set.

5-16

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page125

Monday, June 18 2012 1:48 PM q

Activation/Deactivation

To activate the system, press the ON switch.

To deactivate the system, press the OFF switch.

Black plate (125,1)

Driving Your Mazda

Starting and Driving

3. Set the cruise control by pressing the cruise control SET /SET - switch up or down at the desired speed. The cruise control is set at the moment the cruise control SET /SET - switch is pressed up or down. Release the accelerator pedal simultaneously.

WARNING

Always turn off the cruise control system when it is not in use:

Leaving the cruise control system in an activation-ready state while the cruise control is not in use is dangerous as the cruise control could unexpectedly activate if the activation button is accidentally pressed, and result in loss of vehicle control and an accident.

To Set Speed

1. Activate the cruise control system by pressing the ON switch.

2. Accelerate to the desired speed, which must be more than 30 km/h (19 mph).

NOTE l

Release the cruise control switch at the desired speed, otherwise the speed will continue increasing while the switch is pressed up, and continue decreasing while it is pressed down (except when the accelerator pedal is depressed).

l l

On a steep grade, the vehicle may momentarily slow down while ascending, or speed up while descending.

Cruise control will turn off if the vehicle speed decreases below 25 km/h (16 mph) when cruise is activated, such as when climbing a steep grade.

5-17

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page126

Monday, June 18 2012 1:48 PM

Black plate (126,1)

Driving Your Mazda

Starting and Driving q

To Increase Cruising Speed

Follow either of these procedures.

To increase speed using cruise control switch

Press up the cruise control SET switch and hold it. Your vehicle will accelerate.

Release the switch at the speed you want.

To increase speed using accelerator pedal

Depress the accelerator pedal to accelerate to the desired speed.

Press down or press up on the cruise control SET /SET - switch and release it immediately.

Your vehicle has a tap-up feature that allows you to increase your current speed in increments of 1.6 km/h (1 mph) by a momentary tap of the cruise control SET switch. Multiple taps will increase your vehicle speed 1.6 km/h (1 mph) for each tap.

NOTE

Accelerate if you want to speed up temporarily when the cruise control is on. Greater speed will not interfere with or change the set speed.

Take your foot off the accelerator to return to the set speed.

To Decrease Cruising Speed

Press down the cruise control SET switch and hold it. The vehicle will gradually slow.

Release the switch at the speed you want.

5-18

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page127

Monday, June 18 2012 1:48 PM

Black plate (127,1)

Driving Your Mazda

Starting and Driving

Your vehicle has a tap-down feature that allows you to decrease your current speed in decrements of 1.6 km/h (1 mph) by a momentary tap of the cruise control SET switch. Multiple taps will decrease your vehicle speed 1.6 km/h (1 mph) for each tap.

To Resume Cruising Speed at

More Than 30 km/h (19 mph)

If some other method besides the OFF switch was used to cancel cruising speed

(such as applying the brake pedal) and the system is still activated, the most recent set speed will automatically resume when the RESUME switch is pressed.

If vehicle speed is below 30 km/h (19 mph), increase the vehicle speed up to 30 km/h (19 mph) or more and press the

RESUME switch.

Press the CANCEL switch.

The system turns off when the ignition is switched off.

NOTE

Cruise control will cancel at about 15 km/h (9 mph) below the preset speed (such as may happen when climbing a long, steep grade).

To Cancel

To cancel the system, use one of these methods: l l

Press the OFF switch.

Slightly depress the brake pedal.

Depress the clutch pedal (Manual transaxle only).

Downloaded from

Form No.8CL7-EA-12H

5-19

Mazda2_8CL7-EA-12H_Edition1 Page128

Monday, June 18 2012 1:48 PM

Black plate (128,1)

Driving Your Mazda

Starting and Driving

Traction Control System

(TCS)

The Traction Control System (TCS) enhances traction and safety by controlling engine torque and braking.

When the TCS detects driving wheel slippage, it lowers engine torque and operates the brakes to prevent loss of traction.

This means that on a slick surface, the engine adjusts automatically to provide optimum power to the drive wheels, limiting wheel spin and loss of traction.

WARNING

Do not rely on the traction control system as a substitute for safe driving:

The traction control system (TCS) cannot compensate for unsafe and reckless driving, excessive speed, tailgating (following another vehicle too closely), and hydroplaning

(reduced tire friction and road contact because of water on the road surface). You can still have an accident.

Use snow tires or tire chains and drive at reduced speeds when roads are covered with ice and/or snow:

Driving without proper traction devices on snow and/or ice-covered roads is dangerous. The traction control system (TCS) alone cannot provide adequate traction and you could still have an accident.

NOTE

To turn off the TCS, press the DSC OFF switch

(page 5-22).

TCS/DSC Indicator Light

This indicator light stays on for a few seconds when the ignition is switched

ON. If the TCS or DSC is operating, the indicator light flashes.

If the light stays on, the TCS or DSC may have a malfunction and they may not operate correctly. Take your vehicle to an

Authorized Mazda Dealer.

NOTE l

In addition to the indicator light flashing, a slight lugging sound will come from the l engine. This indicates that the TCS is operating properly.

On slippery surfaces, such as fresh snow, it will be impossible to achieve high rpm when the TCS is on.

5-20

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page129

Monday, June 18 2012 1:48 PM

Black plate (129,1)

Driving Your Mazda

Starting and Driving

Dynamic Stability Control

(DSC)

The Dynamic Stability Control (DSC) automatically controls braking and engine torque in conjunction with systems such as ABS and TCS to help control side slip when driving on slippery surfaces, or during sudden or evasive maneuvering, enhancing vehicle safety.

Refer to ABS (page 5-8) and TCS (page

5-20).

DSC operation is possible at speeds greater than 20 km/h (12 mph).

WARNING

Do not rely on the dynamic stability control as a substitute for safe driving:

The dynamic stability control (DSC) cannot compensate for unsafe and reckless driving, excessive speed, tailgating (following another vehicle too closely), and hydroplaning

(reduced tire friction and road contact because of water on the road surface). You can still have an accident.

CAUTION

The DSC may not operate correctly unless the following are observed:

Use tires of the correct size specified for your Mazda on all

Ø four wheels.

Use tires of the same manufacturer, brand and tread pattern on all four wheels.

Do not mix worn tires.

The DSC may not operate correctly when tire chains are used or a temporary spare tire is installed because the tire diameter changes.

NOTE

After switching the ignition ON, a clicking sound may be heard behind the dashboard.

This sound is the result of the DSC system selfcheck operation and does not indicate an abnormality.

TCS/DSC Indicator Light

This indicator light stays on for a few seconds when the ignition is switched

ON. If the TCS or DSC is operating, the indicator light flashes.

If the light stays on, the TCS or DSC may have a malfunction and they may not operate correctly. Take your vehicle to an

Authorized Mazda Dealer.

5-21

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page130

Monday, June 18 2012 1:48 PM

Black plate (130,1)

Driving Your Mazda

Starting and Driving q

DSC OFF Indicator Light

This indicator light stays on for a few seconds when the ignition is switched

ON.

It also illuminates when the DSC OFF switch is pressed and TCS/DSC is switched off (page 5-22).

If the light stays on when the TCS/DSC is not switched off, take your vehicle to an

Authorized Mazda Dealer. The dynamic stability control may have a malfunction.

DSC OFF Switch

Press the DSC OFF switch to turn off the

TCS/DSC. The DSC OFF indicator light illuminates.

NOTE l l l

When DSC is on and you attempt to free the vehicle when it is stuck, or drive it out of freshly fallen snow, the TCS (part of the

DSC system) will activate. Depressing the accelerator will not increase engine power and freeing the vehicle may be difficult.

When this happens, turn off the TCS/DSC.

If the TCS/DSC is off when the engine is turned off, it automatically activates when the ignition is switched ON.

Leaving the TCS/DSC on will provide the best stability.

Press the switch again to turn the TCS/

DSC back on. The DSC OFF indicator light turns off.

5-22

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page131

Monday, June 18 2012 1:48 PM

Black plate (131,1)

Driving Your Mazda

Starting and Driving

Tire Pressure Monitoring System

The tire pressure monitoring system (TPMS) monitors the pressure for each tire.

If tire pressure is too low in one or more tires, the system will inform the driver via the warning light in the instrument panel and by the warning beep sound.

The tire pressure sensors installed on each wheel send tire pressure data by radio signal to the receiver unit in the vehicle.

Tire pressure sensors

NOTE

When the ambient temperature is low due to seasonal changes, tire temperatures are also lower.

When the tire temperature decreases, the air pressure decreases as well. The TPMS warning light may illuminate more frequently. Visually inspect the tires daily before driving, and check tire pressures monthly with a tire pressure gauge. When checking tire pressures, use of a digital tire pressure gauge is recommended.

TPMS does not alleviate your need to check the pressure and condition of all four tires regularly.

Downloaded from

Form No.8CL7-EA-12H

Some models.

5-23

Mazda2_8CL7-EA-12H_Edition1 Page132

Monday, June 18 2012 1:48 PM

Black plate (132,1)

Driving Your Mazda

Starting and Driving

CAUTION

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.)

As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly underinflated tire causes the tire to overheat and can lead to tire failure. Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if underinflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.

Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly.

The TPMS malfunction indicator is combined with the low tire pressure telltale.

When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.

When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.

To avoid false readings, the system samples for a little while before indicating a problem. As a result it will not instantaneously register a rapid tire deflation or blow out.

NOTE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

5-24

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page133

Monday, June 18 2012 1:48 PM

Black plate (133,1)

Driving Your Mazda

Starting and Driving q

Tire Pressure Monitoring System

Warning Light

This warning light illuminates for a few seconds when the ignition is switched

ON.

Thereafter, the warning light illuminates and a beep is heard when tire pressure is too low in one or more tires, and flashes when there is a system malfunction.

WARNING

If the tire pressure monitoring system warning light illuminates or flashes, or the tire pressure warning beep sound is heard, decrease vehicle speed immediately and avoid sudden maneuvering and braking:

If the tire pressure monitoring system warning light illuminates or flashes, or the tire pressure warning beep sound is heard, it is dangerous to drive the vehicle at high speeds, or perform sudden maneuvering or braking. Vehicle drivability could worsen and result in an accident.

To determine if you have a slow leak or a flat, pull over to a safe position where you can check the visual condition of the tire and determine if you have enough air to proceed to a place where air may be added and the system monitored again by an

Authorized Mazda Dealer or a tire repair station.

Do not ignore the TPMS Warning Light:

Ignoring the TPMS warning light is dangerous, even if you know why it is illuminated. Have the problem taken care of as soon as possible before it develops into a more serious situation that could lead to tire failure and a dangerous accident.

Warning light illuminates/Warning beep sounds

When the warning light illuminates, and the warning beep sound is heard (about 3 seconds), tire pressure is too low in one or more tires.

5-25

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page134

Monday, June 18 2012 1:48 PM

Black plate (134,1)

Driving Your Mazda

Starting and Driving

Adjust the tire pressure to the correct tire pressure. Refer to the specification charts

(page 10-6).

CAUTION

When replacing/repairing the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensors may be damaged.

NOTE l

Perform tire pressure adjustment when the tires are cold. Tire pressure will vary according to the tire temperature, therefore let the vehicle stand for 1 hour or only drive it 1.6 km (1 mile) or less before adjusting the tire pressures. When pressure is adjusted on hot tires to the cold inflation pressure, the TPMS warning light/beep may turn on after the tires cool and pressure drops below specification.

Also, an illuminated TPMS warning light, resulting from the tire air pressure dropping l l due to cold ambient temperature, may turn off if the ambient temperature rises. In this case, it will also be necessary to adjust the tire air pressures. If the TPMS warning light illuminates due to a drop in tire air pressure, make sure to check and adjust the tire air pressures.

After adjusting the tire air pressures, it may require some time for the TPMS warning light to turn off. If the TPMS warning light remains illuminated, drive the vehicle at a speed of at least 25 km/h (16 mph) for 10 minutes, and then verify that it turns off.

Tires lose air naturally over time and the

TPMS cannot tell if the tires are getting too soft over time or you have a flat. However, when you find one low tire in a set of fourthat is an indication of trouble; you should have someone drive the vehicle slowly forward so you can inspect any low tire for cuts and any metal objects sticking through tread or sidewall. Put a few drops of water in the valve stem to see if it bubbles indicating a bad valve. Leaks need to be addressed by more than simply refilling the trouble tire as leaks are dangerous - take it to an Authorized Mazda Dealer which has all the equipment to fix tires, TPMS systems and order the best replacement tire for your vehicle.

5-26

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page135

Monday, June 18 2012 1:48 PM

Black plate (135,1)

Driving Your Mazda

Starting and Driving

If the warning light illuminates again even after the tire pressures are adjusted, there may be a tire puncture. Replace the punctured tire with the temporary spare tire (page 7-6).

NOTE

A tire pressure sensor is not installed to the temporary spare tire. The warning light will flash continuously while the temporary spare tire is being used.

Warning light flashes

When the warning light flashes, there may be a system malfunction. Consult an

Authorized Mazda Dealer.

System Error Activation

When the warning light flashes, there may be a system malfunction. Consult an

Authorized Mazda Dealer.

A system error activation may occur in the following cases: l

When there is equipment or a device near the vehicle using the same radio l l l l l l frequency as that of the tire pressure sensors.

When using the following devices in the vehicle that may cause radio l l interference with the receiver unit.

A digital device such as a personal computer.

A current converter device such as a

DC-AC converter.

When excess snow or ice adheres to the vehicle, especially around the wheels.

When the tire pressure sensor batteries are exhausted.

When using a wheel with no tire pressure sensor installed.

When using tires with steel wire reinforcement in the side walls.

When using tire chains.

Tires and Wheels

CAUTION

When inspecting or adjusting the tire air pressures, do not apply excessive force to the stem part of the wheel unit. The stem part could be damaged.

Changing tires and wheels

The following procedure allows the

TPMS to recognize a tire pressure sensor's unique ID signal code whenever tires or wheels are changed, such as changing to and from winter tires.

NOTE

Each tire pressure sensor has a unique ID signal code. The signal code must be registered with the TPMS before it can work.

The easiest way to do it is to have an

Authorized Mazda Dealer change your tire and complete ID signal code registration.

When having tires changed at an

Authorized Mazda Dealer

When an Authorized Mazda Dealer changes your vehicle's tires, they will complete the tire pressure sensor ID signal code registration.

When changing tires yourself

If you or someone else changes tires, you or someone else can also undertake the steps for the TPMS to complete the ID signal code registration.

1. After tires have been changed, switch the ignition ON, then back to ACC or

OFF.

2. Wait for about 15 minutes.

5-27

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page136

Monday, June 18 2012 1:48 PM

Black plate (136,1)

Driving Your Mazda

Starting and Driving

3. After about 15 minutes, drive the vehicle at a speed of at least 25 km/h

(16 mph) for 10 minutes and the tire pressure sensor ID signal code will be registered automatically.

NOTE

If the vehicle is driven within about 15 minutes of changing tires, the tire pressure monitoring system warning light will flash because the sensor ID signal code would not have been registered. If this happens, park the vehicle for about 15 minutes, after which the sensor ID signal code will register upon driving the vehicle for 10 minutes.

Replacing tires and wheels

CAUTION

When replacing/repairing the tires or wheels or both, have the work done by an Authorized Mazda

Dealer, or the tire pressure sensors may be damaged.

The wheels equipped on your

Mazda are specially designed for installation of the tire pressure sensors. Do not use non-genuine wheels, otherwise it may not be possible to install the tire pressure sensors.

Be sure to have the tire pressure sensors installed whenever tires or wheels are replaced.

When having a tire or wheel or both replaced, the following types of tire pressure sensor installations are possible.

The tire pressure sensor is removed from the old wheel and installed to the new one.

The same tire pressure sensor is used with the same wheel. Only the tire is replaced.

5-28 l

A new tire pressure sensor is installed to a new wheel.

NOTE l l

The tire pressure sensor ID signal code must be registered when a new tire pressure sensor is purchased. For purchase of a tire pressure sensor and registration of the tire pressure sensor ID signal code, consult an

Authorized Mazda Dealer.

When reinstalling a previously removed tire pressure sensor to a wheel, replace the grommet (seal between valve body/sensor and wheel) for the tire pressure sensor.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page137

Monday, June 18 2012 1:48 PM

Black plate (137,1)

Driving Your Mazda

Instrument Cluster and Indicators

Meters and Gauges

Speedometer ...................................................................................................... page 5-30

Odometer, Trip Meter and Trip Meter Selector .................................................. page 5-30

Tachometer ........................................................................................................ page 5-31

Fuel Gauge ........................................................................................................ page 5-31

Dashboard Illumination ..................................................................................... page 5-32

Trip Computer and INFO Button ...................................................................... page 5-32

5-29

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page138

Monday, June 18 2012 1:48 PM

Black plate (138,1)

Driving Your Mazda

Instrument Cluster and Indicators q

Speedometer

The speedometer indicates the speed of the vehicle.

Odometer, Trip Meter and Trip

Meter Selector

The display mode can be changed from odometer to trip meter A to trip meter B and then back to odometer by pressing the selector while one of them is displayed.

The selected mode will be displayed.

Odometer

Trip meter A

Trip meter B

Press the selector

Selector

Press the selector

NOTE

The odometer and trip meter can be displayed and the selector can be operated as follows even when the ignition is switched to ACC or the ignition is switched off. The trip meter can be switched/reset by pressing the selector.

Displays for approx. 10 minutes after the ignition is switched to ACC or the ignition l is switched off from ON.

Displays for approx. 10 minutes after the driver's door is opened.

Odometer

When this mode is selected, ODO will be displayed.

The odometer records the total distance the vehicle has been driven.

5-30

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page139

Monday, June 18 2012 1:48 PM

Black plate (139,1)

Trip meter

The trip meter can record the total distance of two trips. One is recorded in trip meter A, and the other is recorded in trip meter B.

For instance, trip meter A can record the distance from the point of origin, and trip meter B can record the distance from where the fuel tank is filled.

When trip meter A is selected, pressing the selector again within one second will change to trip meter B mode.

When trip meter A is selected, TRIP A will be displayed. When trip meter B is selected, TRIP B will be displayed.

The trip meter records the total distance the vehicle is driven until the meter is again reset. Return it to

“

0.0

” by holding the selector depressed for 1 second or more. Use this meter to measure trip distances and to compute fuel consumption.

NOTE l

Only the trip meters record tenths of kilometers (miles).

l l l

The trip record will be erased when:

The power supply is interrupted (blown fuse or the battery is disconnected).

The vehicle is driven over 999.9 km

(mile).

Driving Your Mazda

Instrument Cluster and Indicators q

Tachometer

The tachometer shows engine speed in thousands of revolutions per minute

(rpm).

Red zone

CAUTION

Do not run the engine with the tachometer needle in the RED ZONE.

This may cause severe engine damage.

Fuel Gauge

The fuel gauge shows approximately how much fuel is remaining in the tank when the ignition is switched ON.

We recommend keeping the tank over 1/4 full.

5-31

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page140

Monday, June 18 2012 1:48 PM

Black plate (140,1)

Driving Your Mazda

Instrument Cluster and Indicators

If the lowest scale mark and the E are flashing, it indicates the fuel level is low.

Refuel as soon as possible.

Dashboard Illumination

When the headlight switch is in the or position, rotate the knob to adjust the brightness of the dashboard illumination.

Dim

If only the E is flashing, it indicates the fuel tank is nearly empty. Refuel immediately.

Bright

If the gauge indicates that the fuel level is near E, refuel as soon as possible.

NOTE l

After refueling, it may require some time for l the indicator to stabilize. In addition, the indicator may deviate while driving on a slope or curve since the fuel moves in the tank.

The direction of the arrow ( ) indicates that the fuel-filler lid is on the left side of the vehicle.

NOTE

This symbol ( ) indicates the knob to adjust the brightness of the dashboard illumination.

Trip Computer and INFO Button

The trip computer can display the following: l l

The outside temperature.

The current fuel economy.

l l l

The average fuel economy.

The approximate distance you can travel on the available fuel.

The average vehicle speed.

The ignition must be switched ON.

Press the INFO button to change the display mode.

If you have any problems with your trip computer, consult an Authorized Mazda

Dealer.

Outside temperature display

This mode displays the outside temperature.

5-32

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page141

Monday, June 18 2012 1:48 PM

When this mode is selected, will be displayed.

Black plate (141,1)

Driving Your Mazda

Instrument Cluster and Indicators

U.S.A.

CANADA

NOTE l l l l l l

Under the following conditions, the ambient temperature display may differ from the actual ambient temperature depending on the surroundings and vehicle conditions:

Significantly cold or hot temperatures.

Sudden changes in ambient temperature.

The vehicle is parked.

The vehicle is driven at low speeds.

Press the INFO button for a few seconds or more to switch the display from Fahrenheit to Centigrade or vice versa.

Current fuel economy mode

This mode displays the current fuel economy by calculating the amount of fuel consumption and the distance traveled.

Current fuel economy will be calculated and displayed every 2 seconds.

When this mode is selected, CONSUM

CUR will be displayed.

When you've slowed to about 5 km/h (3 mph), - - - L/100 km (- - - mpg) will be displayed.

Average fuel economy mode

This mode displays the average fuel economy by calculating the total fuel consumption and the total traveled distance since purchasing the vehicle, reconnecting the battery after disconnection, or resetting the data. The average fuel economy is calculated and displayed every minute.

When this mode is selected, CONSUM

AV will be displayed.

5-33

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page142

Monday, June 18 2012 1:48 PM

Black plate (142,1)

Driving Your Mazda

Instrument Cluster and Indicators

U.S.A.

When this mode is selected, REMNG will be displayed.

U.S.A.

CANADA

To clear the data being displayed, press the INFO button for more than 1.5

seconds.

After pressing the INFO button, - - - L/

100 km (- - - mpg) will be displayed for about 1 minute before the fuel economy is recalculated and displayed.

Distance-to-empty mode

This mode displays the approximate distance you can travel on the remaining fuel based on the fuel economy.

The distance-to-empty will be calculated and displayed every second.

NOTE l l

Even though the distance-to-empty display may indicate a sufficient amount of remaining mileage before refueling is required, refuel as soon as possible if the

Fuel gauge graduation nears E or When the fuel gauge E-mark flashes.

The display will not change unless you add more than approximately 20 L (5.3 US gal,

4.4 Imp gal) of fuel.

5-34

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page143

Monday, June 18 2012 1:48 PM

Black plate (143,1)

Average vehicle speed mode

This mode displays the average vehicle speed by calculating the distance and the time traveled since connecting the battery or resetting the data.

Average vehicle speed will be calculated and displayed every 10 seconds.

When this mode is selected, AV will be displayed.

U.S.A.

Driving Your Mazda

Instrument Cluster and Indicators

CANADA

To clear the data being displayed, press the INFO button for more than 1.5

seconds. After pressing the INFO button,

- - - km/h (- - - mile/h) will be displayed for about 1 minute before the vehicle speed is recalculated and displayed.

Downloaded from

Form No.8CL7-EA-12H

5-35

Mazda2_8CL7-EA-12H_Edition1 Page144

Monday, June 18 2012 1:48 PM

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

Warning/Indicator Lights

Black plate (144,1)

Warning/Indicator lights will appear in any of the highlighted areas

Signal Warning/Indicator Lights

Brake System Warning Light

Malfunction Warning Light

Charging System Warning Light

Engine Oil Pressure Warning Light

Check Engine Light

High Engine Coolant Temperature Warning Light (Red)

ABS Warning Light

Page

5-38

5-40

5-41

5-39

5-38

5-40

5-36

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page145

Monday, June 18 2012 1:48 PM

Black plate (145,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

Signal Warning/Indicator Lights

Air Bag/Front Seat Belt Pretensioner System Warning Light

Check Fuel Cap Warning Light

Seat Belt Warning Light

Door-Ajar Warning Light

Low Washer Fluid Level Warning Light

Tire Pressure Monitoring System Warning Light

Security Indicator Light

Headlight High-Beam Indicator Light

O/D OFF Indicator Light

Shift Position Indicator Light

Low Engine Coolant Temperature Indicator Light (Blue)

TCS/DSC Indicator Light

DSC OFF Indicator Light

Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green)

Power Steering Malfunction Indicator Light

Turn Signal/Hazard Warning Indicator Lights

5-42

Page

5-41

5-42

5-43

5-45

5-46

5-47

5-37

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page146

Monday, June 18 2012 1:49 PM

Black plate (146,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds q

Brake System Warning Light

This warning has the following functions:

Parking brake warning

The light illuminates when the parking brake is applied with the ignition switched to START or ON. It turns off when the parking brake is fully released.

Low brake fluid level warning

If the light stays on after the parking brake is fully released, you may have a brake problem.

Drive to the side of the road and park off the right-of-way.

You may notice that the pedal is harder to depress or that it may go closer to the floor. In either case, it will take longer to stop the vehicle.

1. With the engine stopped, open the hood and check the brake fluid level immediately, and then add fluid if required (page 8-16).

2. After adding fluid, check the light again.

If the warning light remains on, or if the brakes do not operate properly, do not drive the vehicle. Have it towed to an

Authorized Mazda Dealer.

Even if the light turns off, have your brake system inspected as soon as possible by an Authorized Mazda Dealer.

5-38

NOTE

Having to add brake fluid is sometimes an indicator of leakage. Consult an Authorized

Mazda Dealer as soon as possible even if the brake light is no longer illuminated.

WARNING

Do not drive with the brake system warning light illuminated. Contact an

Authorized Mazda Dealer to have the brakes inspected as soon as possible:

Malfunction Warning Light

When the ignition is switched ON, the malfunction warning light illuminates and then turns off after a few seconds.

The light stays on if the brake switch has a malfunction. Consult an Authorized

Mazda Dealer.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page147

Monday, June 18 2012 1:49 PM

Black plate (147,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

WARNING

Do not drive the vehicle with the malfunction warning light illuminated.

Driving the vehicle with the light illuminated is dangerous as it could result in the loss of brake power and cause an accident. In addition, loss of brake power could occur when stopping the vehicle. Have your vehicle inspected by an Authorized

Mazda Dealer.

ABS Warning Light

The warning light stays on for a few seconds when the ignition is switched

ON.

If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS.

Should this happen, consult an Authorized

Mazda Dealer as soon as possible.

NOTE l l

Recharge the battery.

The brake assist system does not operate while the ABS warning light is illuminated.

Electronic Brake Force

Distribution System Warning

WARNING

Do not drive with both the ABS warning light and brake warning light illuminated. Have the vehicle towed to an Authorized Mazda Dealer to have the brakes inspected as soon as possible:

Driving when the brake system warning light and ABS warning light are illuminated simultaneously is dangerous.

When both lights are illuminated, the rear wheels could lock more quickly in an emergency stop than under normal circumstances.

5-39

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page148

Monday, June 18 2012 1:49 PM

Black plate (148,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds q

Charging System Warning Light

This warning light illuminates when the ignition is switched ON and turns off when the engine is started.

If the warning light illuminates while driving, it indicates a malfunction of the alternator or of the charging system.

Drive to the side of the road and park off the right-of-way. Consult an Authorized

Mazda Dealer.

CAUTION

Do not continue driving when the charging system warning light is illuminated because the engine could stop unexpectedly.

Engine Oil Pressure Warning Light

If the light illuminates while driving:

1. Drive to the side of the road and park off the right-of-way on level ground.

2. Turn off the engine and wait 5 minutes for the oil to drain back into the oil pan.

3. Inspect the engine oil level (page 8-13).

If it's low, add the appropriate amount of engine oil while being careful not to overfill.

4. Start the engine and check the warning light.

If the light remains illuminated even after you add oil, stop the engine immediately and have your vehicle towed to an

Authorized Mazda Dealer.

CAUTION

Do not run the engine if the oil pressure is low. It could result in extensive engine damage.

Check Engine Light

This warning light illuminates when the ignition is switched ON and turns off when the engine is started.

This warning light indicates low engine oil pressure.

This indicator light illuminates when the ignition is switched ON and turns off when the engine is started.

If this light illuminates while driving, the vehicle may have a problem. It is important to note the driving conditions when the light illuminated and consult an

Authorized Mazda Dealer.

5-40

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page149

Monday, June 18 2012 1:49 PM

Black plate (149,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

The check engine light may illuminate in the following cases: l

The fuel tank level being very low or approaching empty.

l l

The engine's electrical system has a problem.

The emission control system has a problem.

If the check engine light remains on or flashes continuously, do not drive at high speeds and consult an Authorized Mazda

Dealer as soon as possible.

High Engine Coolant Temperature

Warning Light (Red)

CAUTION

Do not drive the vehicle with the high engine coolant temperature warning light illuminated. Otherwise, it could result in damage to the engine.

Air Bag/Front Seat Belt

Pretensioner System Warning Light

When the ignition is switched ON, the light illuminates momentarily and then turns off.

The light flashes when the engine coolant temperature is extremely high, and illuminates when the engine coolant temperature increases further.

Handling Procedure

Flashing light

Drive slowly to reduce engine load.

Illuminated light

This indicates the possibility of overheating. Park the vehicle in a safe place immediately and stop the engine.

Refer to Overheating (page 7-15).

WARNING

Never tamper with the air bag/ pretensioner systems and always have an Authorized Mazda Dealer perform all servicing and repairs:

Self-servicing or tampering with the systems is dangerous. An air bag/ pretensioner could accidentally activate or become disabled causing serious injury or death.

5-41

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page150

Monday, June 18 2012 1:49 PM

Black plate (150,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds q

Check Fuel Cap Warning Light

The seat belt warning light illuminates if the driver or front passenger's seat is occupied and the seat belt is not fastened when the ignition switched ON.

Door-Ajar Warning Light

This warning light illuminates for a few seconds when the ignition is switched

ON.

If the check fuel cap warning light illuminates while driving, the fuel-filler cap may not be installed properly. Stop the engine and reinstall the fuel-filler cap.

Refer to Fuel-Filler Cap on page 3-18.

Seat Belt Warning Light

Driver's seat

This warning light illuminates when any door or liftgate is not securely closed.

Close the door or liftgate securely before driving the vehicle.

Low Washer Fluid Level

Warning Light

Front passenger's seat

This warning light indicates that little washer fluid remains. Add fluid (page

8-19).

5-42

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page151

Monday, June 18 2012 1:49 PM

Black plate (151,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds q

Tire Pressure Monitoring System

(TPMS) Warning Light

This warning light illuminates for a few seconds when the ignition is switched

ON.

Thereafter, the warning light illuminates and a beep is heard when tire pressure is too low in one or more tires, and flashes when there is a system malfunction.

WARNING

Authorized Mazda Dealer or a tire repair station.

Do not ignore the TPMS Warning Light:

Warning light illuminates/Warning beep sounds

When the warning light illuminates, and the warning beep sound is heard (about 3 seconds), tire pressure is too low in one or more tires.

Some models.

5-43

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page152

Monday, June 18 2012 1:49 PM

Black plate (152,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

Adjust the tire pressure to the correct tire pressure. Refer to the specification charts

(page 10-6).

CAUTION

When replacing/repairing the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensors may be damaged.

NOTE l

Tires lose air naturally over time and the

5-44

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page153

Monday, June 18 2012 1:49 PM

Black plate (153,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

If the warning light illuminates again even after the tire pressures are adjusted, there may be a tire puncture. Replace the punctured tire with the temporary spare tire (page 7-6).

NOTE

A tire pressure sensor is not installed to the temporary spare tire. The warning light will flash continuously while the temporary spare tire is being used.

Warning light flashes

When the warning light flashes, there may be a system malfunction. Consult an

Authorized Mazda Dealer.

Security Indicator Light

Headlight High-Beam Indicator

Light

This light indicates one of two things: l

The high-beam headlights are on.

The turn signal lever is in the flash-topass position.

O/D OFF Indicator Light

(Automatic Transaxle)

This indicator light starts flashing every 2 seconds when the ignition is switched from ON to ACC and the immobilizer system is armed.

The light stops flashing when the ignition is switched ON with the correct ignition key.

At this time, the immobilizer system is disarmed and the light illuminates for about 3 seconds and then turns off.

If the engine does not start with the correct ignition key, and the security indicator light keeps illuminating or flashing, the system may have a malfunction. Consult an Authorized

Mazda Dealer.

This light illuminates when the overdrive has been turned off.

CAUTION

If the overdrive-off indicator light flashes, the transaxle has an electrical problem. Continuing to drive your Mazda in this condition could cause damage to your transaxle. Consult an Authorized

Mazda Dealer as soon as possible.

5-45

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page154

Monday, June 18 2012 1:49 PM

Black plate (154,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds q

TCS/DSC Indicator Light

Shift Position Indicator Light

(Automatic Transaxle)

This indicates the selected shift position when the ignition is switched to ON.

Shift Position Indicator Light q

Low Engine Coolant Temperature

Indicator Light (Blue)

When the ignition is switched ON, the light illuminates momentarily and then turns off.

The light illuminates continuously when the engine coolant temperature is low and turns off after the engine is warm.

NOTE

If the low engine coolant temperature indicator light remains illuminated after the engine has been sufficiently warmed up, the temperature sensor could have a malfunction. Consult an

Authorized Mazda Dealer.

This indicator light stays on for a few seconds when the ignition is switched

ON. If the TCS or DSC is operating, the indicator light flashes.

If the light stays on, the TCS or DSC may have a malfunction and they may not operate correctly. Take your vehicle to an

Authorized Mazda Dealer.

NOTE l

In addition to the indicator light flashing, a slight lugging sound will come from the l engine. This indicates that the TCS is operating properly.

On slippery surfaces, such as fresh snow, it will be impossible to achieve high rpm when the TCS is on.

DSC OFF Indicator Light

This indicator light stays on for a few seconds when the ignition is switched

ON.

It also illuminates when the DSC OFF switch is pressed and TCS/DSC is switched off (page 5-22).

5-46

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page155

Monday, June 18 2012 1:49 PM

Black plate (155,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

If the light stays on when the TCS/DSC is not switched off, take your vehicle to an

Authorized Mazda Dealer. The dynamic stability control may have a malfunction.

Cruise Main Indicator Light

(Amber)/Cruise Set Indicator

Light (Green)

The indicator light has two colors.

Cruise Main Indicator Light (Amber)

The indicator light illuminates amber when the ON switch is pressed and the cruise control system is activated.

Cruise Set Indicator Light (Green)

The indicator light illuminates green when a cruising speed has been set.

Power Steering Malfunction

Indicator Light

If the light remains illuminated or flashing after the engine is started, or illuminates while driving, turn off the engine after parking in a safe place, and then start the engine again.

If the light does not illuminate after restarting the engine, this indicates that the power steering is restored and normal steering is possible.

If the light remains illuminated, the power steering is still inoperable. Consult an

Authorized Mazda Dealer.

NOTE l

The power steering system is inoperable l when the power steering malfunction indicator light illuminates or flashes.

Steering is possible, but requires more physical effort.

Turn Signal/Hazard Warning

Indicator Lights

This indicator light illuminates or flashes when the ignition is switched ON, and turns off when the engine is started.

When operating the turn signal lights, the left or right turn signal indicator light flashes to indicate which turn signal light is operating (page 5-53).

Some models.

5-47

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page156

Monday, June 18 2012 1:49 PM

Black plate (156,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds

When operating the hazard warning lights, both turn signal indicator lights flash (page 5-59).

NOTE

If an indicator light remains illuminated (does not flash) or if it flashes abnormally, one of the turn signal bulbs may be burned out.

Beep Sounds

Air Bag/Front Seat Belt

Pretensioner System Warning Beep

If a malfunction is detected in the air bag/ front seat belt pretensioner systems and the warning light, a warning beep sound will be heard for about 5 seconds every minute.

The air bag and seat belt pretensioner system warning beep sound will continue to be heard for approximately 35 minutes.

Have your vehicle inspected at an

Authorized Mazda Dealer as soon as possible.

WARNING

Do not drive the vehicle with the air bag/front seat belt pretensioner system warning beep sounding:

Driving the vehicle with the air bag/ front seat belt pretensioner system warning beep sounding is dangerous.

In a collision, the air bags and the front seat belt pretensioner system will not deploy and this could result in death or serious injury.

Contact an Authorized Mazda Dealer to have the vehicle inspected as soon as possible.

5-48

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page157

Monday, June 18 2012 1:49 PM

Black plate (157,1)

Driving Your Mazda

Warning/Indicator Lights and Beep Sounds q

Seat Belt Warning Beep

If the driver's seat belt is not fastened when the ignition is switched ON, a beep sound will be heard for about 6 seconds.

If the driver or the front passenger's seat belt is not fastened and the vehicle is driven at a speed faster than about 20 km/h (12 mph), a beep sound will be heard again for a specified period of time.

Refer to Seat Belt Reminder on page

2-19.

Ignition Key Reminder

If the ignition is switched off or the ignition is switched to ACC with the key inserted, a continuous beep sound will be heard when the driver's door is opened.

Lights-On Reminder

If lights are on and the ignition is switched to ACC or the ignition is switched off, or the key is removed from the ignition switch, a continuous beep sound will be heard when the driver's door is opened.

NOTE

When the ignition is switched to ACC or the ignition is switched off, the

“

Ignition Key

Reminder

”

(page 5-3) overrides the lights-on reminder.

Tire Inflation Pressure Warning

Beep

The warning beep sound will be heard for about 3 seconds when there is any abnormality in tire inflation pressures

(page 5-23).

Some models.

5-49

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page158

Monday, June 18 2012 1:49 PM

Black plate (158,1)

Driving Your Mazda

Switches and Controls

Lighting Control

Headlights

Turn the headlight switch to turn the headlights, other exterior lights and dashboard illumination on or off.

NOTE

To prevent discharging the battery, do not leave the lights on while the engine is off unless safety requires them.

Without AUTO position

With AUTO position

Switch Position

Headlights

Taillights

Parking lights

License lights

Side-marker lights

Dashboard illumination

Off

Switch Position

Headlights

Taillights

Parking lights

License lights

Side-marker lights

Dashboard illumination

Off

Auto

Off

AUTO (Auto-light control)

When the headlight switch is in the

AUTO position and the ignition is switched ON, the light sensor senses the surrounding lightness or darkness and automatically turns the headlights, other exterior lights and dashboard illumination on or off (see chart above).

5-50

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page159

Monday, June 18 2012 1:49 PM

Black plate (159,1)

Driving Your Mazda

Switches and Controls

CAUTION

Do not shade the light sensor by adhering a sticker or a label on the windshield. Otherwise the light sensor will not operate correctly.

Light sensor

The light sensor also works as a rain sensor for the auto-wiper control. Keep hands and scrapers clear of the windshield when the wiper lever is in the AUTO position and the ignition is switched ON as fingers could be pinched or the wipers and wiper blades damaged when the wipers activate automatically. If you are going to clean the windshield, be sure the wipers are turned off completely

― this is particularly important when clearing ice and snow

― when it is particularly tempting to leave the engine running.

NOTE l l

The headlights, other exterior lights and dashboard illumination may not turn off immediately even if the surrounding area becomes well-lit because the light sensor determines that it is nighttime if the surrounding area is continuously dark for several minutes such as inside long tunnels, traffic jams inside tunnels, or in indoor parking lots.

In this case, the light turns off if the light switch is turned to the OFF position.

The dashboard illumination can be l adjusted by rotating the knob in the instrument cluster. Also, the day/night mode can be changed by pressing the knob. To adjust the brightness of the dashboard illumination: Refer to Dashboard

Illumination on page 5-32.

The sensitivity of the AUTO lights may be changed by an Authorized Mazda Dealer.

Refer to Personalization Features on page

10-8.

Lights-On Reminder

NOTE

When the ignition is switched to ACC or the ignition is switched off, the

“

Ignition Key

Reminder

”

(page 5-3) overrides the lights-on reminder.

5-51

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page160

Monday, June 18 2012 1:49 PM

Black plate (160,1)

Driving Your Mazda

Switches and Controls q

Headlight High-Low Beam

Press the lever forward to turn on the high beams.

Pull the lever back to its original position for the low beams.

High beam

Low beam q

Daytime Running Lights (Canada)

In Canada, vehicles must be driven with the headlights on during daytime operation.

For that reason, the daytime running lights automatically turn on when the ignition is switched ON.

NOTE

The Daytime Running Lights turn off when the parking brake is applied.

Flashing the Headlights

To flash the headlights, pull the lever fully towards you (the headlight switch does not need to be on). The lever will return to the normal position when released.

OFF

Flashing

5-52

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page161

Monday, June 18 2012 1:49 PM

Black plate (161,1)

Turn and Lane-Change

Signals

Turn Signals

Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self-cancel after the turn is completed.

If the indicator light continues to flash after a turn, manually return the lever to its original position.

Right turn

Right lane change

OFF

Left lane change

Left turn

Green indicators on the dashboard show which signal is working.

Lane-change signals

Move the lever slightly toward the direction of the change

― until the indicator flashes

― and hold it there. It will return to the off position when released.

NOTE

If an indicator light stays on without flashing or if it flashes abnormally, one of the turn signal bulbs may be burned out.

Driving Your Mazda

Switches and Controls

Fog Lights

Use this switch to turn on the fog lights.

The fog lights will improve visibility at night and during foggy conditions.

To turn the fog lights on, rotate the fog light switch to the position.

The headlight switch must be in the position before turning on the fog lights.

Fog light switch

To turn them off, rotate the fog light switch to the OFF position or turn the headlight switch to the position.

or OFF

NOTE l

The fog lights will turn off when the headlights are set at high beam.

(With auto-light control)

If the fog light switch is in the ON position and the headlight switch is in the AUTO position, the fog lights will be turned on when the headlights, the exterior lights and dashboard illumination are automatically turned on.

Some models.

5-53

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page162

Monday, June 18 2012 1:49 PM

Black plate (162,1)

Driving Your Mazda

Switches and Controls

Windshield Wipers and

Washer

The ignition must be switched ON.

WARNING

Use only windshield washer fluid or plain water in the reservoir:

Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident.

Only use windshield washer fluid mixed with anti-freeze protection in freezing weather conditions:

Using windshield washer fluid without anti-freeze protection in freezing weather conditions is dangerous as it could freeze on the windshield and block your vision which could cause an accident.

In addition, make sure the windshield is sufficiently warmed using the defroster before spraying the washer fluid.

NOTE

Because heavy ice and snow can jam the wiper blades, the wiper motor is protected from motor breakdown, overheating and possible fire by a circuit breaker. This mechanism will automatically stop operation of the blades, but only for about 5 minutes.

If this happens, turn off the wiper switch and park off the right-of-way, and remove the snow and ice.

After 5 minutes, turn on the switch and the blades should operate normally. If they do not resume functioning, consult an Authorized

Mazda Dealer as soon as possible. Drive to the side of the road and park off the right-ofway. Wait until the weather clears before trying to drive with the wipers inoperative.

Windshield Wipers

Turn the wipers on by pressing the lever up or down.

With INT position

5-54

Downloaded from

Form No.8CL7-EA-12H

Switch

Position

Wiper operation

Single wipe cycle (mist)

Intermittent

Low speed

High speed

Mazda2_8CL7-EA-12H_Edition1 Page163

Monday, June 18 2012 1:49 PM

Black plate (163,1)

With AUTO position

Switch

Position

Wiper operation

Single wipe cycle (mist)

Auto control

Low speed

High speed

AUTO (Auto-wiper control)

When the wiper lever is in the AUTO position, the rain sensor senses the amount of rainfall on the windshield and turns the wipers on or off automatically

(off

― intermittent

― low speed

― high speed).

Driving Your Mazda

Switches and Controls

The sensitivity of the rain sensor can be adjusted by turning the switch on the wiper lever.

From the center position (normal), rotate the switch downward for higher sensitivity (faster response) or rotate it upward for less sensitivity (slower response).

Higher sensitivity

Switch

Center position

Less sensitivity

CAUTION

Do not shade the rain sensor by adhering a sticker or a label on the windshield. Otherwise the rain sensor will not operate correctly.

Rain sensor

5-55

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page164

Monday, June 18 2012 1:49 PM

Black plate (164,1)

Driving Your Mazda

Switches and Controls

When the wiper lever is in the

AUTO position and the ignition is switched ON, the wipers may move automatically in the following cases:

If the windshield above the rain

Ø sensor is touched or wiped with a cloth.

If the windshield is struck with a hand or other object from either outside or inside the vehicle.

Keep hands and scrapers clear of the windshield when the wiper lever is in the AUTO position and the ignition is switched ON as fingers could be pinched or the wipers and wiper blades damaged when the wipers activate automatically.

If you are going to clean the windshield, be sure the wipers are turned off completely

― this is particularly important when clearing ice and snow

― when it is most likely that the engine is left running.

NOTE l l l

Switching the auto-wiper lever from the

OFF to the AUTO position while driving at a vehicle speed of 4 km/h (2 mph) or higher

(or after driving the vehicle) activates the windshield wipers once, after which they operate according to the rainfall amount.

The auto-wiper control may not operate when the rain sensor temperature is about

10 °C (14 °F) or lower, or about 85 °C

(185 °F) or higher.

If the windshield is coated with water repellent, the rain sensor may not be able to l l sense the amount of rainfall correctly and auto-wiper control may not operate properly.

If dirt or foreign matter (Such as ice or matter containing salt water) adheres to the windshield above the rain sensor or if the windshield is iced, it could cause the wipers to move automatically. However, if the wipers cannot remove this ice, dirt or foreign matter, the auto-wiper control will stop operation. In this case, set the wiper lever to the low speed position or high speed position for manual operation, or remove the ice, dirt or foreign matter by hand to restore the auto-wiper operation.

If the auto-wiper lever is left in the AUTO position, the wipers could operate automatically from the effect of strong light sources, electromagnetic waves, or infrared light because the rain sensor uses an optical sensor. It is recommended that the auto-wiper lever be switched to the OFF position other than when driving the vehicle under rainy conditions.

5-56

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page165

Monday, June 18 2012 1:49 PM

Black plate (165,1) q

Windshield Washer

Pull the lever toward you and hold it to spray washer fluid.

OFF

Washer

Driving Your Mazda

Switches and Controls

Rear Window Wiper and

Washer

The ignition must be switched ON.

Rear Window Wiper

NOTE

With the wiper lever in the OFF or intermittent position/AUTO position, the wipers will operate continuously until the lever is released.

If the washer does not work, inspect the fluid level (page 8-19). If it's normal, consult an Authorized Mazda Dealer.

Turn the wiper on by turning the rear wiper/washer switch.

Rear Window Washer

To spray washer fluid, turn the rear wiper/ washer switch to the position. After the switch is released, the washer will stop.

If the washer does not work, inspect the fluid level (page 8-19). If it's normal and the washer still does not work, consult an

Authorized Mazda Dealer.

5-57

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page166

Monday, June 18 2012 1:49 PM

Black plate (166,1)

Driving Your Mazda

Switches and Controls

Rear Window Defroster

The rear window defroster clears frost, fog, and thin ice from the rear window.

The ignition must be switched ON.

Press the switch to turn on the rear window defroster. The rear window defroster operates for about 15 minutes and turns off automatically.

The indicator light illuminates during operation.

To turn off the rear window defroster before the 15 minutes has elapsed, press the switch again.

Indicator light q

Mirror Defroster

To turn on the mirror defrosters, switch the ignition ON and press the rear window defroster switch (page 5-58).

CAUTION

Do not use sharp instruments or window cleaners with abrasives to clean the inside of the rear window surface. They may damage the defroster grid inside the window.

NOTE

This defroster is not designed for melting snow.

If there is an accumulation of snow on the rear window, remove it before using the defroster.

5-58

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page167

Monday, June 18 2012 1:49 PM

Black plate (167,1)

Driving Your Mazda

Switches and Controls

Horn

To sound the horn, press the the steering wheel.

mark on

Hazard Warning Flasher

The hazard warning lights should always be used when you stop on or near a roadway in an emergency.

The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.

Depress the hazard warning flasher and all the turn signals will flash.

NOTE l l

The turn signals do not work when the hazard warning lights are on.

Check local regulations about the use of hazard warning lights while the vehicle is being towed to verify that it is not in violation of the law.

5-59

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page168

Monday, June 18 2012 1:49 PM

Black plate (168,1)

5-60

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page169

Monday, June 18 2012 1:49 PM

Black plate (169,1)

Interior Comfort

Use of various features for drive comfort, including air-conditioning and audio system.

Climate Control System ............................................................... 6-2

Operating Tips ........................................................................... 6-2

Vent Operation .......................................................................... 6-3

Control Panel

......................................................................... 6-5

Audio System ................................................................................. 6-9

Antenna ..................................................................................... 6-9

Operating Tips for Audio System ........................................... 6-10

Audio Set ................................................................................ 6-23

Audio Control Switch Operation

......................................... 6-37

AUX/USB/iPod Mode ............................................................ 6-39

Safety Certification ................................................................. 6-49

Interior Equipment ..................................................................... 6-50

Sunvisors ................................................................................. 6-50

Interior Lights ......................................................................... 6-50

Cup Holder .............................................................................. 6-51

Bottle Holder ........................................................................... 6-52

Storage Compartments ............................................................ 6-53

Accessory Socket .................................................................... 6-54

Downloaded from

Form No.8CL7-EA-12H

Some models.

6-1

Mazda2_8CL7-EA-12H_Edition1 Page170

Monday, June 18 2012 1:49 PM

Black plate (170,1)

Interior Comfort

Climate Control System

Operating Tips

Operating the Climate Control

System

Operate the climate control system with the engine running.

NOTE

To prevent the battery from being discharged, do not leave the fan control dial on for a long period of time with the ignition switched ON when the engine is not running.

Clearing the Air Inlet

Clear all obstructions such as leaves, snow and ice from the hood and the air inlet in the cowl grille to improve the system efficiency.

Foggy Windows

The windows may fog up easily in humid weather. Use the climate control system to defog the windows.

To help defog the windows, operate the air conditioner to dehumidify the air.

NOTE

The air conditioner may be used along with the heater to dehumidify the air.

Outside/Recirculated Air Position

Use the outside air position in normal conditions. The recirculated air position should be used only when driving on dusty roads or for quick cooling of the interior.

Parking in Direct Sunlight

If the vehicle has been parked in direct sunlight during hot weather, open the windows to let warm air escape, then run the climate control system.

Not Using for a Long Period

Run the air conditioner about 10 minutes at least once a month to keep internal parts lubricated.

Check the Refrigerant before the

Weather Gets Hot

Have the air conditioner checked before the weather gets hot. Lack of refrigerant may make the air conditioner less efficient. Consult an Authorized Mazda

Dealer for refrigerant inspection.

The air conditioner is filled with

HFC134a (R134a), a refrigerant that will not damage the ozone layer.

If the air conditioner is low on refrigerant or has a malfunction, consult an

Authorized Mazda Dealer.

Replacement of the Cabin Air Filter

Your vehicle is equipped with an air filter for the air conditioner. It is necessary to change the filter periodically as indicated in scheduled maintenance (page 8-4).

Consult an Authorized Mazda Dealer for replacement of the cabin air filter.

6-2

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page171

Monday, June 18 2012 1:49 PM

Black plate (171,1)

Interior Comfort

Climate Control System

Vent Operation

Adjusting the Vents

Directing airflow

1. Press the upper part of the air vent to open it.

2. Rotate the air vent left and right to adjust the direction of airflow.

NOTE

When using the air conditioner under humid ambient temperature conditions, the system may blow fog from the vents. This is not a sign of trouble but a result of humid air being suddenly cooled.

6-3

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page172

Monday, June 18 2012 1:49 PM

Interior Comfort

Climate Control System q

Selecting the Airflow Mode

Dashboard Vents

Black plate (172,1)

Defroster and Floor Vents

Dashboard and Floor Vents Defroster Vents

Floor Vents

6-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page173

Monday, June 18 2012 1:49 PM

Black plate (173,1)

Interior Comfort

Climate Control System

Control Panel

Rear window defroster switch

Temperature control dial Fan control dial

A/C switch

Mode selector dial q

Control Switches

Temperature control dial

Air intake selector

Fan control dial

Some models.

Cold Hot

This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold.

This dial allows variable fan speeds.

―

Fan off

―

Low speed

―

Medium low speed

―

Medium high speed

―

High speed

Some models.

6-5

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page174

Monday, June 18 2012 1:49 PM

Black plate (174,1)

Interior Comfort

Climate Control System

Mode selector dial Press the A/C switch to turn the air conditioner on. The indicator light on the switch will illuminate when the fan control dial is set at position 1, 2, 3, or 4.

Press the switch once again to turn the air conditioner off.

NOTE

The air conditioner may not function when the outside temperature approaches 0 °C (32 °F).

Air intake selector

Turn the mode selector dial to select airflow mode (page 6-4).

NOTE l l l

The mode selector dial can be set at the intermediate positions ( or ) between each mode. Set the dial to an intermediate position if you want to slightly adjust the airflow amount.

For example, when the mode selector dial is at the position between the and positions, airflow from the floor vent is less than that of the position.

When the mode selector dial is in the selector in the mode).

position, use the air intake position (outside air l

The indication is designed to inform the front occupants to switch the air intake selector lever to the position (outside air mode), while the mode selector dial is turned to the or position, to speed defogging of the windshield.

A/C switch

This lever controls the source of air entering the vehicle.

It is recommended that under normal conditions the lever be kept in the outside air position.

Outside air position ( )

Outside air is taken into the vehicle. Use this position for normal ventilation and heating.

Recirculated air position ( )

Outside air is shut off. Air within the vehicle is recirculated.

This position can be used when driving on a dusty road or in similar conditions. It also helps to provide quicker cooling of the interior.

6-6

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page175

Monday, June 18 2012 1:49 PM

Black plate (175,1)

Interior Comfort

Climate Control System

WARNING

Do not use the rainy weather: position in cold or

Using the position in cold or rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.

Heating

1. Set the mode selector dial to the position.

2. Set the air intake selector to the position.

3. Set the temperature control dial to the hot position.

4. Set the fan control dial to the desired speed.

5. If dehumidified heating is desired, turn on the air conditioner.

NOTE l l

If the windshield fogs up easily, set the mode selector dial to the position.

If cooler air is desired at face level, set the mode selector dial at the position and adjust the temperature control dial to maintain maximum comfort.

The air to the floor is warmer than air to the face (except when the temperature control dial is set at the extreme hot or cold position).

Cooling (With Air Conditioner)

1. Set the mode selector dial to the position.

2. Set the temperature control dial to the cold position.

3. Set the fan control dial to the desired speed.

4. Turn on the air conditioner by pressing the A/C switch.

5. Adjust the fan control dial and temperature control dial to maintain maximum comfort.

CAUTION

If the air conditioner is used while driving up long hills or in heavy traffic, monitor the engine coolant temperature warning light to see if it is illuminated or flashing (page 5-41).

The air conditioner may cause engine overheating. If the warning light is illuminated or flashing, turn the air conditioning off (page 7-15).

NOTE l l l

When maximum cooling is desired, set the temperature control dial to the extreme cold position and set the air intake selector to the position, then set the fan control dial to position 4.

If warmer air is desired at floor level, set the mode selector dial at the position and adjust the temperature control dial to maintain maximum comfort.

The air to the floor is warmer than air to the face (except when the temperature control dial is set at the extreme hot or cold position).

Ventilation

1. Set the mode selector dial to the position.

2. Set the air intake selector to the position.

3. Set the temperature control dial to the desired position.

Some models.

6-7

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page176

Monday, June 18 2012 1:49 PM

Black plate (176,1)

Interior Comfort

Climate Control System

4. Set the fan control dial to the desired speed.

Windshield Defrosting and Defogging

1. Set the mode selector dial to the position.

2. Set the air intake selector to the position.

3. Set the temperature control dial to the desired position.

4. Set the fan control dial to the desired speed.

5. If dehumidified heating is desired, turn on the air conditioner.

WARNING

Do not defog the windshield using the position with the temperature control set to the cold position:

Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windshield to fog up. Your vision will be hampered, which could lead to a serious accident. Set the temperature control to the hot or warm position when using the position.

NOTE l

For maximum defrosting, turn on the air conditioner, set the temperature control dial to the extreme hot position and the fan l control dial to position 4.

If warm air is desired at the floor, set the mode selector dial to the position.

Dehumidifying (With Air

Conditioner)

Operate the air conditioner in cool or cold weather to help defog the windshield and side windows.

1. Set the mode selector dial to the desired position.

2. Set the air intake selector to the position.

3. Set the temperature control dial to the desired position.

4. Set the fan control dial to the desired speed.

5. Turn on the air conditioner by pressing the A/C switch.

NOTE

One of the functions of the air conditioner is dehumidifying the air and, to use this function, the temperature does not have to be set to cold.

Therefore, set the temperature control dial to the desired position (hot or cold) and turn on the air conditioner when you want to dehumidify the cabin air.

6-8

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page177

Monday, June 18 2012 1:49 PM

Black plate (177,1)

Antenna

Detachable/Collapsible Type

When using the radio, move the antenna to the position indicated in the figure.

To remove the antenna, turn it counterclockwise.

To install the antenna, turn it clockwise.

Make sure the antenna is securely installed.

Remove

Install

Interior Comfort

Audio System

CAUTION

When entering a garage or other area with a low clearance where the antenna could be hit, lower the antenna to prevent it being damaged.

When tilting the antenna down, hold its base and make sure that the antenna does not contact the roof. Otherwise, it could cause damage to the roof.

Do not drive the vehicle with the antenna tilted down, as it could vibrate against the roof resulting in damage to the roof.

When using an automatic car wash facility, also remove the antenna.

Be careful around the antenna when removing snow from the roof. Otherwise the antenna could be damaged.

NOTE

When leaving your vehicle unattended, we recommend that you remove the antenna and store it inside the vehicle.

6-9

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page178

Monday, June 18 2012 1:49 PM

Black plate (178,1)

Interior Comfort

Audio System

Operating Tips for Audio

System

WARNING

Do not adjust the audio control switches while driving the vehicle:

Adjusting the audio while driving the vehicle is dangerous as it could distract your attention from the vehicle operation which could lead to a serious accident. Always adjust the audio while the vehicle is stopped.

Even if the audio control switches are equipped on the steering wheel, learn to use the switches without looking down at them so that you can keep your maximum attention on the road while driving the vehicle.

CAUTION

For the purposes of safe driving, adjust the audio volume to a level that allows you to hear sounds outside of the vehicle including car horns and particularly emergency vehicle sirens.

NOTE l l

To prevent the battery from being discharged, do not leave the audio system on for a long period of time when the engine is not running.

If a cellular phone or CB radio is used in or near the vehicle, it could cause noise to occur from the audio system, however, this does not indicate that the system has been damaged.

Radio Reception

AM characteristics

AM signals bend around such things as buildings or mountains and bounce off the ionosphere. Therefore, they can reach longer distances than FM signals. Because of this, two stations may sometimes be picked up on the same frequency at the same time.

Ionosphere

Station 1 Station 2

FM characteristics

An FM broadcast range is usually about

―

50 km (25

―

30 miles) from the source. Because of extra coding needed to break the sound into two channels, stereo

FM has even less range than monaural

(non-stereo) FM.

FM Station

40—50km

(25—30 miles)

6-10

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page179

Monday, June 18 2012 1:49 PM

Black plate (179,1)

Interior Comfort

Audio System

Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect.

Unlike AM signals, FM signals cannot travel beyond the horizon. Therefore, FM stations cannot be received at the great distances possible with AM reception.

Ionosphere

FM wave

AM wave

FM wave

100—200 km (60—120 miles)

Atmospheric conditions can also affect

FM reception. High humidity will cause poor reception. However, cloudy days may provide better reception than clear days.

Multipath noise

Since FM signals can be reflected by obstructions, it is possible to receive both the direct signal and the reflected signal at the same time. This causes a slight delay in reception and may be heard as a broken sound or a distortion. This problem may also be encountered when in close proximity to the transmitter.

Flutter/Skip noise

Signals from an FM transmitter move in straight lines and become weak in valleys between tall buildings, mountains, and other obstacles. When a vehicle passes through such an area, the reception conditions may change suddenly, resulting in annoying noise.

Weak signal noise

In suburban areas, broadcast signals become weak because of distance from the transmitter. Reception in such fringe areas is characterized by sound breakup.

Reflected wave

Direct

6-11

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page180

Monday, June 18 2012 1:49 PM

Black plate (180,1)

Interior Comfort

Audio System

Strong signal noise

This occurs very close to a transmitter tower. The broadcast signals are extremely strong, so the result is noise and sound breakup at the radio receiver.

Station drift noise

When a vehicle reaches the area of two strong stations broadcasting at similar frequencies, the original station may be temporarily lost and the second station picked up. At this time there will be some noise from this disturbance.

Station 1

88.1 MHz

Station 2

88.3 MHz q

Operating Tips for CD Player

Condensation phenomenon

Immediately after turning on the heater when the vehicle is cold, the CD or optical components (prism and lens) in the

CD player may become clouded with condensation. At this time, the CD will eject immediately when placed in the unit.

A clouded CD can be corrected simply by wiping it with a soft cloth. Clouded optical components will clear naturally in about an hour. Wait for normal operation to return before attempting to use the unit.

Handling the CD player

The following precautions should be observed.

Do not spill any liquid on the audio system.

Do not insert any objects, other than

CDs, into the slot.

6-12

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page181

Monday, June 18 2012 1:49 PM

Black plate (181,1) l

The CD revolves at high speed within the unit. Defective (cracked or badly bent) CDs should never be used.

Interior Comfort

Audio System l

A new CD may have rough edges on its inner and outer perimeters. If a disc with rough edges is used, the CD player will not play the CD properly. In addition, the disc may not eject resulting in a malfunction. Remove the rough edges in advance by using a ballpoint pen or pencil as shown below. To remove the rough edges, rub the side of the pen or pencil against the inner and outer perimeter of the CD.

Do not use non-conventional discs such as heart-shaped, octagonal discs, etc. The disc may not eject resulting in a malfunction.

When driving over uneven surfaces, the sound may jump.

If the memory portion of the CD is transparent or translucent, do not use the disc.

Transparent l

The CD player has been designed to play CDs bearing the identification logo as shown below. No other discs can be played.

6-13

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page182

Monday, June 18 2012 1:49 PM

Black plate (182,1)

Interior Comfort

Audio System l l

Use discs that have been legitimately produced. If illegally-copied discs such as pirated discs are used, the system may not operate properly.

Be sure never to touch the signal surface when handling the CDs. Pick up a CD by grasping the outer edge or the edge of the hole and the outer edge.

l l l l l l

Do not stick paper or tape on the CD.

Avoid scratching the reverse side (the side without a label). The disc may not eject resulting in a malfunction.

Dust, finger smudges, and dirt can decrease the amount of light reflected from the signal surface, thus affecting sound quality. If the CD should become soiled, gently wipe it with a soft cloth from the center of the CD to the edge.

Do not use record sprays, antistatic agents, or household spray cleaners.

Volatile chemicals such as benzine and thinner can also damage the surface of the CD and must not be used. Anything that can damage, warp, or fog plastic should never be used to clean CDs.

Insert discs one by one. If two discs are inserted at the same time, the system may not operate properly.

The CD player ejects the CD if the CD is inserted upside down. Also dirty and/or defective CDs may be ejected.

Do not insert cleaning discs in the CD player.

l l l l l l l l l

Do not insert any disc with a peel-off seal affixed to it.

This unit may not be able to play certain CD-R/CD-RWs made using a computer or music CD recorder due to disc characteristics, scratches, smudges, dirt, etc., or due to dust or condensation on the lens inside the unit.

Storing CDs in the vehicle exposed to direct sunlight or high temperature may damage the CD-R/CD-RWs, and make them unplayable.

CD-R/CD-RW exceeding 700 MB cannot be played.

This unit may not be able to play certain discs made using a computer due to the application (writing software) setting used. (For details, consult the store where the application was purchased.)

It is possible that certain text data, such as titles, recorded on a CD-R/CD-RW may not be displayed when musical data (CD-DA) is playing.

The period from when a CD-RW is inserted to when it begins playing is longer than a normal CD or CD-R.

Completely read the instruction manual and cautions for CD-R/CD-RWs.

Do not use discs with cellophane tape adhering, partially peeled off labels, or adhesive material exuding from the edges of the CD label. Also, do not use discs with a commercially-available

CD-R label affixed. The disc may not eject resulting in a malfunction.

6-14

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page183

Monday, June 18 2012 1:49 PM

Black plate (183,1)

Interior Comfort

Audio System q

Operating tips for MP3

NOTE

Supply of this product only conveys a license for private, non-commercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegenerating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via the Internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications.

An independent license for such use is required. For details, please visit http://www.mp3licensing.com.

l l l l l

This audio system handles MP3 files l l l l that have been recorded on CD-R/CD-

RW/CD-ROMs. Discs that have been recorded using the following formats can be played:

ISO 9660 level 1

ISO 9660 level 2

Joliet extended format

Romeo extended format

This unit handles MP3 files conforming to the MP3 format containing both header frames and data frames.

This unit can play multi-session recorded discs that have up to 40 sessions.

This unit can play MP3s with sampling frequencies of 8/11.025/12/16/22.05/

24/32/44.1/48 kHz.

This unit can play MP3 files that have been recorded in bit rates of 8 kbps to

320 kbps. Nonetheless, to insure enjoyment of music with consistent sound quality, it is recommended to use discs that have been recorded at a bit rate of 128 kbps or more.

l l l

If a disc has both music data (CD-DA) and MP3 files, playback of the two file types differs depending on how the disc was recorded.

Packet written discs cannot be played on this unit.

This unit does not play CDs recorded using MP3i (MP3 interactive), MP3

PRO and RIFF MP3 formats.

About folders and files l l

The order of hierarchy for MP3 files and folders during playback or other functions is from shallow to deep. The arrangement and playing order of a l recorded disc containing MP3 files is as follows:

File number

A numerical file number is assigned to each file in a folder in the order of hierarchy from shallow to deep.

Folder number

A numerical folder number is assigned to each folder in the order of hierarchy from shallow to deep.

NOTE

Folders and tracks (files) within the same hierarchy play in the order they were written to the disc depending on the write software.

6-15

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page184

Monday, June 18 2012 1:49 PM

Black plate (184,1)

Interior Comfort

Audio System

Folder

No.

: Folder

: Track (File)

Level1

Level3

Level2 Level4

Playback may not occur in the above hierarchy depending on the audio unit.

l l l l l l

The folder order is automatically assigned and this order cannot be optionally set.

Any folder without an MP3 file will be ignored. (It will be skipped and the folder number will not be displayed.)

MP3 files not conforming to the MP3 format containing both header frames and data frames will be skipped and not played.

This unit will play MP3 files that have up to eight levels. However, the more levels a disc has, the longer it will take to initially start playing. It is recommended to record discs with two levels or less.

A single disc with up to 512 files can be played and a single folder with up to

255 files can be played.

When naming an MP3 file, be sure to add an MP3 file extension (.mp3) after the file name.

6-16 l

The number of characters which can be displayed is restricted.

CAUTION

This unit can only play MP3 files that have an MP3 file extension (.mp3) attached. Do not attach an MP3 file extension to any other type file as it could cause noise to be emitted or a malfunction in the unit.

About ID3 Tag display l l

This unit can only display ID3 Tag album, track and artist names that have been input using Ver.1.0/1.1/2.2/2.3/2.4

formats. Any other data that may have been input cannot be displayed.

This unit cannot display some characters. Characters which cannot be displayed are indicated by an asterisk

( ).

Specialized glossary

MP3

Abbreviation for

“

MPEG Audio Layer 3

”

A technical standard for audio compression as decided by the ISO

MPEG working group. Use of MP3 allows for audio data to be compressed to approximately a tenth of the source data size.

*1 International Organization for

Standardization

ISO 9660

An international standard for logical formatting of CD-ROM files and folders.

It is divided into three separate levels based on differences in file naming procedures, data configuration and other characteristics.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page185

Monday, June 18 2012 1:49 PM

Black plate (185,1)

Interior Comfort

Audio System

Multi-session

A session is the complete amount of data recorded from the beginning to the end of a single period of CD-ROM, CD-R/CD-

RW data recording. Multi-session refers to the existence of data from two or more sessions on a single disc.

Sampling

Refers to the process of encoding analog audio data at regular intervals and converting it to digital data. The sampling rate refers to the number of times a sample is taken in one second and is expressed in Hz units. Increasing the sampling rate improves the sound quality but also increases the data size.

Bit rate

Refers to the volume of data per second, expressed in bps (bits per second).

Generally, the larger the number of the transfer bit rate when compressing an

MP3 file, the more information regarding musical reproduction it carries, and therefore the better the sound quality.

Packet writing

A general term for the method, similar to that used for floppy discs or hard drives, of recording the required file in a single increment on a CD-R and similar.

ID3 Tag

ID3 tag is a method for storing information related to the music in an

MP3 file. Information such as track, artist and album name can be stored. This content can be freely edited using ID3 editing function software.

VBR

Abbreviation for Variable Bit Rate. While

CBR (Constant Bit Rate) is generally used, VBR varies the bit rate for audio compression according to compression conditions and this allows for compression with preference given to sound quality.

Operating Tips for WMA

WMA is short for Windows Media Audio and is the audio compression format used by Microsoft.

Audio data can be created and stored at a higher compression ratio than MP3.

* Microsoft and Windows Media are registered trademarks of Microsoft

Corporation U.S. in the United States and other countries.

Playable WMA files are as follows:

Item

Specification

Sampling rate

Bit rate

Content

Windows Media Audio Version

7.0, 8.0, 9.0

22.05 kHz (MID)

44.1/48/32 kHz (HI)

―

192 kbps (Version 7.0, 8.0)

―

320 kbps (Version 9.0)

CAUTION

This unit plays files with the (.wma) file extension as a WMA file. Do not use the WMA file extension for files other than WMA files. Otherwise, it could result in noise or a malfunction.

Track, artist and album name information is recorded as data termed

“

WMA-Tag

”

, and this information is displayable.

6-17

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page186

Monday, June 18 2012 1:49 PM

Black plate (186,1)

Interior Comfort

Audio System l l

WMA files written under specifications other than the indicated specification may not play normally or files or folder names may not display correctly.

The file extension may not be provided depending on the computer operating system, version, software, or settings.

In this case, add the file extension

“

.wma

” to the end of the file name, and then write it to the disc.

Operating Tips for AAC

Advanced Audio Coding (AAC) is standardized voice compression established by the ISO

*1 working group

(MPEG). Audio data can be created and stored at a higher compression ratio than

MP3.

*1 International Organization for

Standardization

Playable AAC file specifications

This unit supports playback of AAC files recorded in CD-R and CD-RW.

Playable AAC files are as follows:

Item

Specification

Sampling rate

Bit rate

Content

MPEG-4 AAC-LC

8/11.025/12 kHz

16/22.05/24 kHz

32/44.1/48 kHz

―

320 kbps

CAUTION

This unit plays files with the file extension (.aac/.m4a) as an AAC file.

Do not use the AAC file extension for files other than AAC files. Otherwise, it could result in noise or a malfunction.

l l l

Song, artist, and album name information in the AAC file is recorded as data termed

“ iTunes, m4a, Meta-Data applicable

”

, and this information is displayable.

AAC files written under specifications other than the indicated specification may not play normally or files or folder names may not display correctly.

The file extension may not be provided depending on the computer operating system, version, software, or settings.

In this case, add the file extension

“

.aac/.m4a

” to the end of the file name, then write it to the disc.

6-18

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page187

Monday, June 18 2012 1:49 PM

Black plate (187,1)

Interior Comfort

Audio System q

Operating Tips for USB memory

This unit supports playback of MP3/

WMA/AAC files recorded to USB memory.

NOTE l l

Music data (MP3/WMA/AAC (.aac/.m4a) format) stored in a USB mass-storage class compliant device (such as USB flash memory) can be played.

Playback may not be possible depending on the type and condition of the USB flash memory even if the audio file complies with the standard above.

l l l l l l

A copyright protected WMA/AAC file cannot be played in this unit.

The order of the music data stored in the device may differ from the playback order.

To prevent loss or damage of stored data, we recommend that you always back up your data.

If a device exceeds the maximum electric current value of 500 mA, it may not operate or recharge when connected.

Do not pull out the USB memory while in the USB mode (only pull it out while in FM/

AM radio or CD mode).

The device will not operate if the data is password protected.

Playable MP3 file specifications

Playable MP3 files are as follows:

Bit rate

Item

Specification

Sampling rate

Content

MPEG1 AUDIO LAYER III

MPEG2 AUDIO LAYER III

MPEG2.5

44.1/48/32 kHz (MPEG1)

22.05/24/16 kHz (MPEG2)

11.025/12/8 kHz (MPEG2.5)

―

320 kbps (MPEG1)

―

160 kbps (MPEG2)

―

160 kbps (MPEG2.5)

CAUTION

This unit plays files with the file extension (mp3) as an MP3 file. Do not use the MP3 file extension for files other than MP3 files. Otherwise, it could result in noise or a malfunction.

l l

MP3 files written under specifications other than the indicated specification may not play normally or files or folder names may not display correctly.

The file extension may not be provided depending on the computer operating system, version, software, or settings.

In this case, add the file extension

“

.mp3

” to the end of the file name, and then write it to the memory.

Playable WMA file specification

Playable WMA files are as follows:

Bit rate

Item

Specification

Sampling rate

Content

Windows Media Audio Version

7.0, 8.0, 9.0 (standard)

22.05 kHz (MID)

44.1/48/32 kHz (HI)

―

192 kbps (Version 7.0, 8.0)

―

320 kbps (Version 9.0)

CAUTION

This unit plays files with the file extension (wma) as a WMA file. Do not use the WMA file extension for files other than WMA files.

Otherwise, it could result in noise or a malfunction.

WMA files written under specifications other than the indicated specification may not play normally or files or folder names may not display correctly.

6-19

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page188

Monday, June 18 2012 1:49 PM

Black plate (188,1)

Interior Comfort

Audio System l

The file extension may not be provided depending on the computer operating system, version, software, or settings.

In this case, add the file extension

“

.wma

” to the end of the file name, and then write it to the memory.

Playable AAC file specification

Playable AAC files are as follows:

Item

Specification

Sampling rate

Bit rate

Content

MPEG4 AAC-LC

8/11.025/12 kHz

16/22.05/24 kHz

32/44.1/48 kHz

―

320 kbps

CAUTION

This unit plays files with the file extension (.aac/.m4a) as an AAC file.

Do not use the AAC file extension for files other than AAC files. Otherwise, it could result in noise or a malfunction.

l l

AAC files written under specifications other than the indicated specification may not play normally or files or folder names may not display correctly.

The file extension may not be provided depending on the computer operating system, version, software, or settings.

In this case, add the file extension

“

.aac

” or

“

.m4a

” to the end of the file name, and then write it to the memory.

Operating Tips for iPod

“ iPod

” is a registered trademark of Apple

Inc. in the United States and other countries.

This unit supports playback of music files recorded to an iPod.

l l l l l

“ iPod

” is a registered trademark of

Apple Inc. in the United States and other countries.

“ iPod classic

” is a registered trademark of Apple Inc. in the United States and other countries.

“ iPod nano

” is a registered trademark of Apple Inc. in the United States and other countries.

“ iPod touch

” is a registered trademark of Apple Inc. in the United States and other countries.

“ iPhone

” is a registered trademark of

Apple Inc. in the United States and other countries.

Connectable iPods are as follows: l iPod: 5G l l l l iPod classic iPod nano: 1/2/3/4/5/6G iPod touch

*1 iPhone

: 3G/3GS/4

*1 Only iPod function

6-20

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page189

Monday, June 18 2012 1:49 PM

CAUTION

Remove the iPod when it is not in use. Because the iPod is not designed to withstand excessive changes in temperature inside the cabin, it could be damaged or the battery may deteriorate due to the excessive temperature or humidity inside the cabin if it is left in the vehicle.

If data in the iPod is lost while it is connected to the unit, Mazda cannot guarantee recovery of any lost data.

If the iPod battery is deteriorated, the iPod may not recharge and playback may not be possible when it is connected to the unit.

Replace the iPod battery immediately.

For the details on using the iPod, refer to the iPod instruction manual.

When connecting the iPod to a

USB port, all commands are made from the audio unit. Control on the iPod side is impossible.

NOTE l l

This unit cannot display the images and video in an iPod.

The iPod functions on the iPod cannot be operated while it is connected to the USB port because the audio unit controls the iPod functions.

Black plate (189,1)

Interior Comfort

Audio System

6-21

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page190

Monday, June 18 2012 1:49 PM

MEMO

Black plate (190,1)

6-22

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page191

Monday, June 18 2012 1:49 PM

Audio Set

Black plate (191,1)

Interior Comfort

Audio System

Power/Volume/Sound Controls .............................................................................. page 6-24

Clock ...................................................................................................................... page 6-28

Operating the Radio ............................................................................................... page 6-30

Operating the Compact Disc (CD) Player .............................................................. page 6-32

Operating the Auxiliary jack/USB port .................................................................. page 6-35

Error Indications ..................................................................................................... page 6-36

6-23

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page192

Monday, June 18 2012 1:49 PM

Interior Comfort

Audio System q

Power/Volume/Sound Controls

Menu button Display

Black plate (192,1)

Power ON/OFF

Power/Volume/Audio control dial

Switch the ignition to ACC or ON.

Press the power/volume dial to turn the audio system on.

Press the power/volume dial again to turn the audio system off.

NOTE

To prevent the battery from being discharged, do not leave the audio system on for a long period of time when the engine is not running.

Volume adjustment

To adjust the volume, turn the power/ volume dial.

Turn the power/volume dial to the right to increase volume, to the left to decrease it.

Audio sound adjustment

1. Press the menu button ( select the function.

) to

6-24

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page193

Monday, June 18 2012 1:49 PM

Black plate (193,1)

*1*2

*1 Depending on the mode selected, the indication changes.

*2 RPT and RDM are displayed only during CD/USB/iPod playback.

*3 If your vehicle is not equipped with rear speakers, adjust the power/ volume dial so the level is even.

Interior Comfort

Audio System

2. Turn the audio control dial to adjust the selected functions as follows:

Indication Turn Left Turn Right

Select mode

Decrease bass

Decrease treble

Increase bass

Increase treble

Shift the sound to the front

Shift the sound to the rear

Shift the sound to the left

Shift the sound to the right

OFF ON

12Hr

(Flashing)

24Hr

(Flashing)

*1 Refer to Operating the Compact Disc (CD)

Player on page 6-32.

Refer to How to use USB mode on page 6-42.

Refer to How to use iPod mode on page 6-46.

NOTE

About 5 seconds after selecting any mode, the volume function will be automatically selected.

To reset bass, treble, fade, and balance, press the menu button ( ) for 2 seconds. The unit will beep and

“

CLEAR

” will be displayed.

Automatic Level Control (ALC)

The automatic level control (ALC) is a feature that automatically adjusts audio volume and sound quality according to the vehicle speed.

The volume increases in accordance with the increase in vehicle speed, and decreases as vehicle speed decreases.

6-25

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page194

Monday, June 18 2012 1:49 PM

Black plate (194,1)

Interior Comfort

Audio System

Select the desired ALC mode.

Mode Volume change

No change

Minimum

Medium

Maximum

Turn the audio control dial to select ALC

OFF or ALC LEVEL1

―

7 modes. The selected mode will be indicated.

Setting RPT (CD/USB/iPod Repeat

Play)

Repeated playback of the track currently being played can be set on or off during playback of the CD/USB/iPod.

Refer to Operating the Compact Disc

(CD) Player on page 6-32.

Refer to How to use USB mode on page

6-42.

Refer to How to use iPod mode on page

6-46.

Setting RDM (CD/USB/iPod Random

Play)

Random playback of tracks on a CD/

USB/iPod can be set on or off during playback of the CD/USB/iPod.

Refer to Operating the Compact Disc

(CD) Player on page 6-32.

Refer to How to use USB mode on page

6-42.

Refer to How to use iPod mode on page

6-46.

BEEP setting

The beep-sound when operating the audio system can be set on or off.

Time adjustment

Rotating the audio control dial switches the display between 12 and 24-hour clock time (page 6-28).

6-26

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page195

Monday, June 18 2012 1:49 PM

MEMO

Black plate (195,1)

Downloaded from

Form No.8CL7-EA-12H

6-27

Mazda2_8CL7-EA-12H_Edition1 Page196

Monday, June 18 2012 1:49 PM

Interior Comfort

Audio System q

Clock

Clock button Menu button Display

Black plate (196,1)

Hour/Minute set switch Audio control dial

Setting the time

The clock can be set at any time when the ignition is switched to ACC or ON.

1. To adjust the time, press the clock button ( ) for about 2 seconds until a beep is heard.

2. The currently set time and hour setting display flashes.

Time adjustment

To adjust the time, press the hour/ minute set switch ( , ) while the clock's current time is flashing.

The hours advance while the upper side of the switch is pressed. The minutes advance while the lower side of the switch is pressed.

3. Press the clock button ( to start the clock.

) again

NOTE

Switching between 12 and 24-hour clock time:

Press the menu button ( ) several times until 12 and 24-hour clock time are displayed.

Turn the audio control dial in either direction, select the desired clock setting while the preferred clock time is flashing.

Changing the display mode

The display on the unit can be changed by pressing the clock button ( ). This alternates the display between clock mode and normal mode. When the clock mode has been selected, the time will be displayed.

NOTE

The displays differ when using the audio in clock mode and normal mode.

6-28

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page197

Monday, June 18 2012 1:49 PM

MEMO

Black plate (197,1)

Downloaded from

Form No.8CL7-EA-12H

6-29

Mazda2_8CL7-EA-12H_Edition1 Page198

Monday, June 18 2012 1:49 PM

Interior Comfort

Audio System q

Operating the Radio

Scan button Display Auto memory button

Black plate (198,1)

Band selector button

Tuning button Power/Volume/Audio control dial Channel preset buttons

Radio ON

Press a band selector button ( turn the radio on.

) to

Band selection

Successively pressing the band selector button ( ) switches the bands as follows: FM1

→

FM2

→

AM.

The selected mode will be indicated. If

FM stereo is being received,

“

” will be displayed.

NOTE

If the FM broadcast signal becomes weak, reception automatically changes from

STEREO to MONO for reduced noise, and the

“

” indicator will go out.

Tuning

The radio has the following tuning methods: Manual, Seek, Scan, Preset channel, and Auto memory tuning. The easiest way to tune stations is to set them on preset channels.

NOTE

If the power supply is interrupted (fuse blows or the battery is disconnected), the preset channels will be erased.

Manual tuning

Select the station by pressing the tuning button ( , ) lightly.

Seek tuning

Automatic search for radio stations starts when the tuning button ( , ) is pressed until a beep sound is heard. The search stops when a station is found.

6-30

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page199

Monday, June 18 2012 1:49 PM

Black plate (199,1)

Interior Comfort

Audio System

NOTE

If you continue to press and hold the button the frequency will continue changing without stopping.

Scan tuning

Press the scan button ( ) to automatically sample stations with a strong frequency. Scanning stops at each station for about five seconds. To hold a station, press the scan button ( again during this interval.

)

Preset channel tuning

The six preset channels can be used to store 6 AM and 12 FM stations.

1. To set a channel first select AM, FM1, or FM2. Tune to the desired station.

2. Depress a channel preset button for about two seconds until a beep sound is heard. The preset channel number and station frequency will be displayed.

The station is now held in the memory.

3. Repeat this operation for the other stations and bands you want to store.

To tune one in the memory, select AM,

FM1, or FM2 and then press its channel preset button. The station frequency and the channel number will be displayed.

NOTE

If the power supply is interrupted (fuse blows or the battery is disconnected), the preset channels will be erased.

Auto memory tuning

This is especially useful when driving in an area where the local stations are not known. Additional AM/FM stations can be stored without disturbing the previously set channels.

(

Press and hold the auto memory button

) for about two seconds until a beep sound is heard; the system will automatically scan and temporarily store up to six stations with the strongest frequencies in each selected band in that area.

After scanning is completed, the station with the strongest frequency will be tuned and its frequency displayed.

Press and release the auto memory button

( ) to recall stations from the autostored stations. One stored station will be selected each time; its frequency and channel number will be displayed.

NOTE

If no stations can be tuned after scanning operations,

“

” will be displayed.

6-31

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page200

Monday, June 18 2012 1:49 PM

Black plate (200,1)

Interior Comfort

Audio System q

Operating the Compact Disc (CD) Player

Menu button Display CD slot CD eject button

Track up/Fast-forward button

Scan button Folder up button

Text button

CD play button

Track down/Reverse button

Type

Music/MP3/WMA/

AAC CD player

Playable data l l

Music data (CD-DA)

MP3/WMA/AAC file

NOTE

If a disc has both music data (CD-DA) and

MP3/WMA/AAC files, playback of the two or three file types differs depending on how the disc was recorded.

Inserting the CD

Insert the CD into the slot, label-side up.

The auto-loading mechanism will set the

CD and begin play.

NOTE

There will be a short lapse before play begins while the player reads the digital signals on the CD.

Folder down button

Scroll button Audio control dial

Ejecting the CD

Press the CD eject button ( ) to eject the

CD.

Playback

Press the CD play button ( ) to start play when a CD is in the unit.

If a CD is not in the unit when the CD play button ( ) is pressed,

“

NO DISC

” will flash on and off.

Fast-forward/Reverse

Press and hold the fast-forward button

( ) to advance through a track at high speed.

Press and hold the reverse button ( ) to reverse through a track at high speed.

6-32

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page201

Monday, June 18 2012 1:49 PM

Black plate (201,1)

Interior Comfort

Audio System

Track search

Press the track up button ( ) once to skip forward to the beginning of the next track.

Press the track down button ( ) once to skip back to the beginning of the current track.

Folder search (during MP3/WMA/AAC

CD playback)

To change to the previous folder, press the folder down button ( ), or press the folder up button ( ) to advance to the next folder.

Music scan

During music CD playback

This function scans the titles on a CD and plays ten seconds of each song to aid you in finding a song you want to listen to.

During MP3/WMA/AAC CD playback

This function scans the titles in a folder currently being played and plays ten seconds of each song to aid you in finding a song you want to listen to.

Press the scan button ( ) during playback to start the scan play operation

(the track number will flash).

Press the scan button ( ) again to cancel scan playback.

NOTE

If the unit is left in scan, normal playback will resume where scan was selected.

Repeat playback

During music CD playback

1. Press the menu button ( ), select the repeat mode and

“

RPT

” will be displayed.

2. Turn the audio control dial and select

“

”

3. Turn the audio control dial and select

“

OFF

” to cancel the repeat play.

During MP3/WMA/AAC CD playback

(Track repeat)

1. Press the menu button ( ), select the repeat mode and

“

RPT

” will be displayed.

2. Turn the audio control dial and select

“

TRACK

”

3. Turn the audio control dial and select

“

OFF

” to cancel the repeat play.

(Folder repeat)

1. Press the menu button ( ), select the repeat mode and

“

RPT

” will be displayed.

2. Turn the audio control dial and select

“

FOLDER

”

3. Turn the audio control dial and select

“

OFF

” to cancel the repeat play.

Random playback

Tracks are randomly selected and played.

During music CD playback

1. Press the menu button ( ), select the random mode and

“

RDM

” will be displayed.

2. Turn the audio control dial and select

“

”

3. Turn the audio control dial and select

“

OFF

” to cancel the random play.

6-33

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page202

Monday, June 18 2012 1:49 PM

Black plate (202,1)

Interior Comfort

Audio System

During MP3/WMA/AAC CD playback

(Folder random)

1. Press the menu button ( ), select the random mode and

“

RDM

” will be displayed.

2. Turn the audio control dial and select

“

FOLDER

”

3. Turn the audio control dial and select

“

OFF

” to cancel the random play.

(CD random)

1. Press the menu button ( ), select the random mode and

“

RDM

” will be displayed.

2. Turn the audio control dial and select

“

DISC

”

3. Turn the audio control dial and select

“

OFF

” to cancel the random play.

Switching the display

For files with a file name and other information that have been input, the display switches between display of the file name and other information each time the text button ( playback.

Music CD

) is pressed during

Track number

Track number /Elapsed time

Track name

Album name

Artist name

MP3/WMA/AAC CD

Folder number/File number

File number /Elapsed time

File name

Folder name

Album name (ID3 Tag)

Song name (ID3 Tag)

Artist name (ID3 Tag)

*1 Does not display while the clock is displayed.

NOTE l

The information viewable in the display is only CD information (such as artist name, song title) which has been recorded to the

CD.

This unit cannot display some characters.

Characters which cannot be displayed are indicated by an asterisk ( ).

Display scroll

Only 12 characters can be displayed at one time. To display the rest of the characters of a long title, press the scroll button ( ). The display scrolls the next 12 characters. Press the scroll button

( ) again after the last 12 characters have been displayed to return to the beginning of the title.

6-34

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page203

Monday, June 18 2012 1:49 PM

NOTE

The number of characters which can be displayed is restricted.

Message display

If there is a CD-related problem,

“

CHECK CD

” is displayed repeatedly.

Turn the audio unit on again, check the

CD for damage, soiling or whether the

CD has been inserted upside down, and then properly reinsert it. If the message reappears, have the unit inspected by an

Authorized Mazda Dealer.

Operating the Auxiliary jack/

USB port

Audio can be heard from the vehicle's speakers by connecting a commerciallyavailable portable audio unit to the auxiliary jack.

Use a commercially-available, nonimpedance (3.5 ) stereo mini plug cable.

Contact an Authorized Mazda Dealer for details.

In addition, audio can be played from the vehicle's audio unit by connecting USB memory or an iPod to the USB port.

Refer to AUX/USB/iPod Mode on page

6-39.

Black plate (203,1)

Interior Comfort

Audio System

6-35

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page204

Monday, June 18 2012 1:49 PM

Black plate (204,1)

Interior Comfort

Audio System q

Error Indications

If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer.

Indication

CHECK CD

Cause

CD is defective

Solution

CD is inserted upside down

Insert the CD properly. If the error indication continues to display, consult an Authorized Mazda Dealer.

Insert another CD properly. If the error indication continues to display, consult an Authorized Mazda

Dealer.

6-36

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page205

Monday, June 18 2012 1:49 PM

Black plate (205,1)

Audio Control Switch

Operation

When the audio unit is turned on, operation of the audio unit from the steering wheel is possible.

NOTE

Because the audio unit will be turned off under the following conditions, the switches will be inoperable.

When the ignition is switched off.

l l

When the power button on the audio unit is pressed and the audio unit is turned off.

When the CD being played is ejected and the audio unit is turned off.

Interior Comfort

Audio System q

Adjusting the Volume

To increase the volume, press up the volume switch.

To decrease the volume, press down the volume switch.

Changing the Source

Press the mode switch ( ) to change the audio source (FM1 radio

→

FM2 radio

→

AM radio

→

CD player

→

AUX

→

USB/iPod

→ cyclical).

Downloaded from

Form No.8CL7-EA-12H

Some models.

6-37

Mazda2_8CL7-EA-12H_Edition1 Page206

Monday, June 18 2012 1:49 PM

Black plate (206,1)

Interior Comfort

Audio System

NOTE l l

The CD mode cannot be selected if a CD has not been inserted.

The AUX mode is unavailable unless you connect a commercially available portable audio unit (such as an MP3 player) to the auxiliary jack. Connect a portable audio unit or similar product on the market to the auxiliary jack to listen to music or audio over the vehicle's speakers. Change the audio source to AUX mode (page 6-39).

Seek Switch

Mute Switch

Press the mute switch ( ) once to mute audio, press it again to resume audio output.

NOTE

If the ignition is switched off with the audio muted, the mute will be canceled.

Therefore, when the engine is restarted, the audio is not muted. To mute the audio again, press the mute switch ( ).

When listening to the radio

Press the seek switch ( , ), the radio switches to the next/previous stored station in the order that it was stored

―

6).

Press and hold the seek switch ( , ) to seek all usable stations at a higher or lower frequency whether programmed or not.

When playing a CD

Press the seek switch ( ) to skip to the next track.

Press the seek switch ( ) to repeat the current track.

6-38

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page207

Monday, June 18 2012 1:49 PM

Black plate (207,1)

Interior Comfort

Audio System

AUX/USB/iPod Mode

Audio can be heard from the vehicle's speakers by connecting a commerciallyavailable portable audio unit to the auxiliary jack.

A commercially-available, non-impedance

(3.5 ) stereo mini plug cable is required.

Contact an Authorized Mazda Dealer for details.

In addition, audio can be played from the vehicle audio device by connecting USB memory or an iPod to the USB port.

To use the auxiliary jack/USB port, pull up its cover.

USB port

Auxiliary jack

How to use AUX mode ....... page 6-40

How to use USB mode ........ page 6-42

How to use iPod mode ......... page 6-46

Error Indications .................. page 6-48

WARNING

Do not adjust the portable audio unit or a similar product while driving the vehicle:

Adjusting the portable audio unit or a similar product while driving the vehicle is dangerous as it could distract your attention from the vehicle operation which could lead to a serious accident. Always adjust the portable audio unit or a similar product while the vehicle is stopped.

Do not allow the connection plug cord to get tangled with the parking brake or the shift lever:

Allowing the plug cord to become tangled with the parking brake or the shift lever is dangerous as it could interfere with driving, resulting in an accident.

CAUTION

Always close the auxiliary jack/

USB port lid when it is not in use.

If foreign matter or liquid penetrate the auxiliary jack/USB port, it may cause a malfunction.

Depending on the portable audio device, noise may occur when the device is connected to the vehicle accessory socket. (If noise occurs, do not use the accessory socket.)

Do not place objects or apply force to the auxiliary jack with the plug connected.

6-39

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page208

Monday, June 18 2012 1:49 PM

Black plate (208,1)

Interior Comfort

Audio System

NOTE l l l

Before using the auxiliary jack/USB port, refer to the instruction manual for the portable audio device.

Use a commercially-available, nonimpedance (3.5

) stereo mini plug for connecting the portable audio unit to the auxiliary jack. Before using the auxiliary jack, read the manufacturer's instructions for connecting a portable audio unit to the auxiliary jack.

To prevent discharging of the battery, do not use the auxiliary input for long periods l l l l with the engine off or idling.

When connecting a device to the auxiliary jack or USB port, noise may occur depending on the connected device. If the device is connected to the vehicle's accessory socket, the noise can be reduced by unplugging it from the accessory socket.

Insert the plug to the auxiliary jack/USB port securely.

Insert or pull out the plug with the plug perpendicular to the auxiliary jack/USB port hole.

Insert or remove the plug by holding its base.

How to use AUX mode

Audio Unit Audio Control

Switches

1. Switch the ignition to ACC or ON.

2. Press the power/volume dial to turn the audio system on.

3. Press the source change button

( ) of the audio unit or the mode switch ( ) of the audio control switches on the steering wheel to change to the AUX mode.

NOTE l l

When the device is not connected to the auxiliary jack, the mode does not switch to the AUX mode.

Set the volume of the portable audio unit to the maximum within the range that the sound does not become distorted, then l l adjust the volume using the power/volume dial of the audio unit or the up/down switch of the audio control switch.

Audio adjustments other than audio volume can only be done using the portable audio device.

If the connection plug is pulled out from the auxiliary jack while in AUX mode, noise may occur.

6-40

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page209

Monday, June 18 2012 1:49 PM

MEMO

Black plate (209,1)

Downloaded from

Form No.8CL7-EA-12H

6-41

Mazda2_8CL7-EA-12H_Edition1 Page210

Monday, June 18 2012 1:49 PM

Black plate (210,1)

Interior Comfort

Audio System q

How to use USB mode

Track up/Fast-forward button

Menu button

Scan button

Display

Folder up button

Type

USB mode

Text button

Source change button

Audio control dial

Track down/Reverse button

Scroll button

Folder down button

Playable data

MP3/WMA/AAC file

Playback

1. Switch the ignition to ACC or ON.

2. Press the power/volume dial to turn the audio system on.

3. Press the source change button

( ) of the audio unit or the mode switch ( ) of the audio control switches on the steering wheel to switch to the USB mode and start playback.

NOTE l l l l

When the USB memory is not connected, the mode does not switch to USB mode.

When there is no playable data in the USB memory,

“

NO CONTENTS

” is indicated.

Playback of the USB memory is in the order of the folder numbers. Folders which have no MP3/WMA/AAC files are skipped.

Do not remove the USB memory while in the USB mode. The data may be damaged.

Fast-forward/Reverse

Press and hold the fast-forward button

( ) to advance through a track at high speed.

Press and hold the reverse button ( ) to reverse through a track at high speed.

Track search

Press the track up button ( ) once to skip forward to the beginning of the next track.

Press the track down button ( ) within a few seconds after playback begins to track down to the beginning of the previous track.

Press the track down button ( ) after a few seconds have elapsed to start playback from the beginning of the current track.

Folder search

To change to the previous folder, press the folder down button ( ), or press the folder up button ( ) to advance to the next folder.

Music Scan

This function scans the titles in a folder currently being played and plays ten seconds of each song to aid you in finding a song you want to listen to.

6-42

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page211

Monday, June 18 2012 1:49 PM

Black plate (211,1)

Press the scan button ( ) during playback to start the scan play operation

(the track number will flash). Press the scan button ( ) again to cancel scan playback.

NOTE

If the unit is left in scan, normal playback will resume where scan was selected.

Repeat playback

Track repeat

1. Press the menu button ( ), select the repeat mode and

“

RPT

” will be displayed.

2. Turn the audio control dial and select

“

TRACK

”

3. Turn the audio control dial and select

“

OFF

” to cancel the repeat play.

Folder repeat

1. Press the menu button ( ), select the repeat mode and

“

RPT

” will be displayed.

2. Turn the audio control dial and select

“

FOLDER

”

3. Turn the audio control dial and select

“

OFF

” to cancel the repeat play.

Random playback

Tracks are randomly selected and played.

Folder random

1. Press the menu button ( ), select the random mode and

“

RDM

” will be displayed.

2. Turn the audio control dial and select

“

FOLDER

”

3. Turn the audio control dial and select

“

OFF

” to cancel the random play.

Interior Comfort

Audio System

All random

1. Press the menu button ( ), select the random mode and

“

RDM

” will be displayed.

2. Turn the audio control dial and select

“

ALL

”

3. Turn the audio control dial and select

“

OFF

” to cancel the random play.

Switching the display

For files with a file name and other information that have been input, the display switches between display of the file name and other information each time the text button ( playback.

) is pressed during

Folder number/File number

File number /Elapsed time

File name

Folder name

Album name

Song name

Artist name

*1 Does not display while the clock is displayed.

6-43

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page212

Monday, June 18 2012 1:49 PM

Interior Comfort

Audio System

NOTE l l

The information (artist name, music name) is displayed only when the USB memory information in the USB memory has information which can be displayed on the screen.

This unit cannot display some characters.

Characters which cannot be displayed are indicated by an asterisk ( ).

Display scroll

Only 12 characters can be displayed at one time. To display the rest of the characters of a long title, press the scroll button ( ). The display scrolls the

( next 12 characters. Press the scroll button

) again after the last 12 characters have been displayed to return to the beginning of the title.

NOTE

The number of characters which can be displayed is restricted.

Error Messages

When the message

“

CHECK USB

” is displayed, it indicates that there is some error in the USB memory. Verify that the content recorded in the USB memory has

MP3/WMA/AAC files and re-connect correctly. If the message reappears, have the unit checked by an Authorized Mazda

Dealer.

Black plate (212,1)

6-44

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page213

Monday, June 18 2012 1:49 PM

MEMO

Black plate (213,1)

Downloaded from

Form No.8CL7-EA-12H

6-45

Mazda2_8CL7-EA-12H_Edition1 Page214

Monday, June 18 2012 1:49 PM

Black plate (214,1)

Interior Comfort

Audio System q

How to use iPod mode

Track up/Fast-forward button

Menu button

Scan button

Display

List up button

Text button

Source change button

Audio control dial

Track down/Reverse button

Scroll button

List down button

Category button

Connectable iPod is as follows: l iPod: 5G l l l l iPod classic iPod nano: 1/2/3/4/5/6G iPod touch

*1 iPhone

: 3G/3GS/4

*1 For only iPod functions

NOTE

The iPod functions on the iPod cannot be operated while it is connected to the unit because the unit controls the iPod functions.

Playback

1. Switch the ignition to ACC or ON.

2. Press the power/volume dial to turn the audio system on.

3. Press the source change button

( ) of the audio unit or the mode switch ( ) of the audio control switches on the steering wheel to switch to the iPod mode and start playback.

NOTE l l l

When an iPod is not connected, the mode does not switch to the iPod mode.

When there is no playable data in the iPod,

“

NO CONTENTS

” is flashed.

Do not remove the iPod while in the iPod mode. Otherwise, the data could be damaged.

Fast-forward/Reverse

Press and hold the fast-forward button

( ) to advance through a track at high speed.

Press and hold the reverse button ( ) to reverse through a track at high speed.

Track search

Press the track up button ( ) once to skip forward to the beginning of the next track.

Press the track down button ( ) within a few seconds after playback begins to track down.

Press the track down button ( ) after a few seconds have elapsed to start playback from the beginning of the track.

The time required to track down/start playback from the beginning of a track varies depending on iPod software version.

6-46

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page215

Monday, June 18 2012 1:49 PM

Black plate (215,1)

Interior Comfort

Audio System

Category search

Press the category up button ( select the next category.

) to

NOTE

The types of categories include Playlist, Artist,

Album, Song, Podcast, Genre, Composer, and

Audio book.

List search

Press the list down button ( ) to select the previous list and press the list up button ( ) to select the next list.

NOTE

When the selected category is Song or Audio book, there is no list.

Music Scan

This function scans the titles in a list currently being played and plays ten seconds of each song to aid you in finding a song you want to listen to.

Press the scan button ( ) during playback to start the scan play operation

(the track number will flash). Press the scan button ( ) again to cancel scan playback.

NOTE

If the unit is left in scan, normal playback will resume where scan was selected.

Repeat playback

1. Press the repeat button ( ), select the repeat mode and

“

RPT

” will be displayed.

2. Turn the audio control dial and select

“

”

3. Turn the audio control dial and select

“

OFF

” to cancel the repeat play.

Random playback

Tracks are randomly selected and played.

Song random

1. Press the menu button ( ), select the random mode and

“

RDM

” will be displayed.

2. Turn the audio control dial and select

“

SONG

”

3. Turn the audio control dial and select

“

OFF

” to cancel the random play.

Album random

1. Press the menu button ( ), select the random mode and

“

RDM

” will be displayed.

2. Turn the audio control dial and select

“

ALBUM

”

3. Turn the audio control dial and select

“

OFF

” to cancel the random play.

NOTE

The track number being played randomly is in the order of the iPod shuffle table.

6-47

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page216

Monday, June 18 2012 1:49 PM

Black plate (216,1)

Interior Comfort

Audio System

Switching the display

For files with a file name and other information that have been input, the display switches between display of the file name and other information each time the text button ( ) is pressed during playback.

File number

File number /Elapsed time

Category (Playlist title/Genre title/Composer title/Podcast title)

Artist name

Album name

Song name

*1 Does not display while the clock is displayed.

NOTE l l

The information (artist name, music name) is displayed only when the iPod has information which can be displayed.

This unit cannot display some characters.

Characters which cannot be displayed are indicated by an asterisk ( ).

Display scroll

( ) again after the last 12 characters have been displayed to return to the beginning of the title.

NOTE

The number of characters which can be displayed is restricted.

Error Messages

If the message

“

CHECK iPod

” is displayed, it indicates that there is a malfunction in the iPod. Verify that the content recorded in the iPod has playable files and connect correctly. If the message reappears, have the unit checked by an

Authorized Mazda Dealer.

Error Indications

If you see an error indication on the display, find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer.

Indication

CHECK USB

CHECK iPod

Cause

USB memory malfunction iPod malfunction

Solution

Connect other USB memory correctly.

If the error indication continues to display, consult an Authorized

Mazda Dealer.

Connect other iPod correctly.

If the error indication continues to display, consult an Authorized

Mazda Dealer.

6-48

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page217

Monday, June 18 2012 1:49 PM

Black plate (217,1)

Interior Comfort

Audio System

Safety Certification

This CD player is made and tested to meet exacting safety standards. It meets FCC requirements and complies with safety performance standards of the U.S. Department of

Health and Human Services.

CAUTION

This CD player should not be adjusted or repaired by anyone except qualified service personnel.

If servicing is required, contact an Authorized Mazda Dealer.

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser exposure. Never operate the CD player with the top case of the unit removed.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

NOTE

For CD player section:

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

6-49

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page218

Monday, June 18 2012 1:49 PM

Black plate (218,1)

Interior Comfort

Interior Equipment

Sunvisors

When you need a sunvisor, lower it for use in front or swing it to the side.

Sunvisor q

Vanity Mirrors

To use the vanity mirror, lower the sunvisor.

Interior Lights

Illuminated Entry System

When the illuminated entry system operates, the overhead light (switch is in the DOOR position) turns on for: l

About 30 seconds after the driver's door is unlocked and the ignition is l l switched off (with the ignition key removed).

About 15 seconds after all doors are closed.

About 15 seconds after the ignition is switched off (with the ignition key removed) with all doors closed.

The light also turns off when: l

The ignition is switched ON and all l doors are closed.

The driver's door is locked.

NOTE

Battery saver

If any door is left opened, the light turns off after about 30 minutes to save the battery.

The light turns on again when the ignition is switched ON, or when any door is opened after all doors have been closed.

Overhead Light

6-50

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page219

Monday, June 18 2012 1:49 PM

Black plate (219,1)

Interior Comfort

Interior Equipment

Switch

Position

Overhead Light

Light off l l

Light is on when any door is open

Light is on or off when the illuminated entry system is on

Light on q

Luggage Compartment Light

Switch

Position

Luggage Compartment Light

Light off

Light on when the liftgate is open

Cup Holder

WARNING

Never use a cup holder to hold hot liquids while the vehicle is moving:

Using a cup holder to hold hot liquids while the vehicle is moving is dangerous. If the contents spill, you could be scalded.

Do not put anything other than cups or drink cans in cup holders:

Putting objects other than cups or drink cans in a cup holder is dangerous.

During sudden braking or maneuvering, occupants could be hit and injured, or objects could be thrown around the vehicle, causing interference with the driver and the possibility of an accident. Only use a cup holder for cups or drink cans.

The cup holder is in the center console.

6-51

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page220

Monday, June 18 2012 1:49 PM

Black plate (220,1)

Interior Comfort

Interior Equipment

Use the center console divider to place a cup or canned drink on the center console tray.

Center console divider

Bottle Holder

Bottle holders are on the inside of the front doors.

Bottle holder

NOTE

A 567 g (20 oz) cup can be placed in each of the cup holders indicated by the arrows. If a cup exceeding 567 g (20 oz) is placed in one of the cup holders, the cup could tip over because it cannot be held firmly, and moreover, the cup may interfere with the operation of the seats.

CAUTION

Do not use the bottle holders for containers without caps. The contents may spill when the door is opened or closed.

6-52

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page221

Monday, June 18 2012 1:49 PM

Black plate (221,1)

Interior Comfort

Interior Equipment

Storage Compartments

WARNING

Keep storage boxes closed when driving:

Driving with the storage boxes open is dangerous. To reduce the possibility of injury in an accident or a sudden stop, keep the storage boxes closed when driving.

CAUTION

Do not leave lighters or eyeglasses in the storage boxes while parked under the sun. A lighter could explode or the plastic material in eyeglasses could deform and crack from high temperature.

Glove Compartment

To open the glove compartment, pull the latch toward you.

Center Console Tray

WARNING

Never use a cup holder to hold hot liquids while the vehicle is moving:

Using a cup holder to hold hot liquids while the vehicle is moving is dangerous. If the contents spill, you could be scalded.

A cup or small items can be placed on the center console tray using the center console divider.

The center console tray is large enough to place a small item when the center console divider is not in use.

To close the glove compartment, firmly press in the center of the glove compartment lid.

Downloaded from

Form No.8CL7-EA-12H

6-53

Mazda2_8CL7-EA-12H_Edition1 Page222

Monday, June 18 2012 1:49 PM

Black plate (222,1)

Interior Comfort

Interior Equipment

Accessory Socket

Switch the ignition to ACC or ON.

Only use genuine Mazda accessories or the equivalent requiring no greater than

120 W (DC 12 V, 10 A).

CAUTION

To prevent accessory socket damage or electrical failure, pay attention to the following:

Do not use accessories that

Ø require more than 120 W (DC 12

V, 10 A).

Do not use accessories that are not genuine Mazda accessories or the equivalent.

Close the cover when the accessory socket is not in use to prevent foreign objects and liquids from getting into the accessory socket.

Correctly insert the plug into the accessory socket.

Do not insert the cigarette lighter into the accessory socket.

Noise may occur on the audio playback depending on the device connected to the accessory socket.

Depending on the device connected to the accessory socket, the vehicle's electrical system may be affected, which could cause the warning light to illuminate.

Disconnect the connected device and make sure that the problem is resolved. If the problem is resolved, disconnect the device from the socket and switch the ignition off. If the problem is not resolved, consult an Authorized

Mazda Dealer.

NOTE

To prevent discharging of the battery, do not use the socket for long periods with the engine off or idling.

6-54

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page223

Monday, June 18 2012 1:49 PM

Black plate (223,1)

In Case of an Emergency

Helpful information on what to do in an emergency.

Parking in an Emergency ............................................................. 7-2

Parking in an Emergency .......................................................... 7-2

Flat Tire ......................................................................................... 7-3

Spare Tire and Tool Storage ...................................................... 7-3

Changing a Flat Tire ................................................................. 7-6

Overheating ................................................................................. 7-15

Overheating ............................................................................. 7-15

Emergency Starting .................................................................... 7-17

Starting a Flooded Engine ....................................................... 7-17

Jump-Starting .......................................................................... 7-18

Push-Starting ........................................................................... 7-21

Emergency Towing ..................................................................... 7-22

Towing Description ................................................................. 7-22

Tiedown Hooks ....................................................................... 7-23

Recreational Towing ............................................................... 7-24

7-1

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page224

Monday, June 18 2012 1:49 PM

In Case of an Emergency

Parking in an Emergency

The hazard warning lights should always be used when you stop on or near a roadway in an emergency.

The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.

Black plate (224,1)

Depress the hazard warning flasher and all the turn signals will flash.

NOTE l l

The turn signals do not work when the hazard warning lights are on.

Check local regulations about the use of hazard warning lights while the vehicle is being towed to verify that it is not in violation of the law.

7-2

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page225

Monday, June 18 2012 1:49 PM

Black plate (225,1)

In Case of an Emergency

Flat Tire

Spare Tire and Tool Storage

Spare tire and tools are stored in the locations illustrated in the diagram.

Lug wrench

Towing eyelet

Jack lever

Flat tire belt

Spare tire

Tool bag Jack

7-3

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page226

Monday, June 18 2012 1:49 PM

In Case of an Emergency

Flat Tire q

Jack

To remove the jack

1. Remove the cover.

Black plate (226,1)

To secure the jack

1. Insert the wing bolt into the jack with the jack screw pointing down and turn the wing bolt clockwise to temporarily tighten it.

2. Turn the jack screw in the direction shown in the figure.

2. Turn the wing bolt and jack screw counterclockwise.

Wing bolt

Jack screw

Wing bolt

Jack screw

3. Turn the wing bolt completely to secure the jack.

NOTE

If the jack is not completely secured, it could rattle while driving. Make sure the jack screw is sufficiently tightened.

l l

Maintenance l

Always keep the jack clean.

Make sure the moving parts are kept free from dirt or rust.

Make sure the screw thread is adequately lubricated.

7-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page227

Monday, June 18 2012 1:49 PM

Black plate (227,1)

In Case of an Emergency

Flat Tire q

Spare Tire

Your Mazda has a temporary spare tire.

The temporary spare tire is lighter and smaller than a conventional tire, and is designed only for emergency use and should be used only for VERY short periods. Temporary spare tires should

NEVER be used for long drives or extended periods.

WARNING

Do not install the temporary spare tire on the front wheels (driving wheels):

Driving with the temporary spare tire on one of the front driving wheels is dangerous. Handling will be affected.

You could lose control of the vehicle, especially on ice or snow bound roads, and have an accident. Move a regular tire to the front wheel and install the temporary spare tire to the rear.

CAUTION

When using the temporary spare tire, driving stability may decrease compared to when using only the conventional tire. Drive carefully.

To avoid damage to the temporary spare tire or to the vehicle, observe the following precautions:

Do not exceed 80 km/h (50

Ø mph).

Avoid driving over obstacles.

Also, do not drive through an automatic car wash. This tire's diameter is smaller than a conventional tire, so the ground clearance is reduced about

10 mm (0.4 in).

Do not use a tire chain on this tire because it will not fit

Ø properly.

Do not use your temporary spare tire on any other vehicle, it has been designed only for your Mazda.

Use only one temporary spare tire on your vehicle at the same time.

NOTE

(With Tire Pressure Monitoring System)

A tire pressure sensor is not installed to the temporary spare tire. The warning light will flash continuously while the temporary spare tire is being used (page 5-25).

7-5

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page228

Monday, June 18 2012 1:49 PM

Black plate (228,1)

In Case of an Emergency

Flat Tire

To remove the spare tire

1. Remove the trunk mat.

Trunk mat

2. Turn the tire hold-down bolt counterclockwise using the lug wrench.

To secure the spare tire

Perform the removal procedure in reverse.

Changing a Flat Tire

NOTE

If the following occurs while driving, it could indicate a flat tire.

l l l

Steering becomes difficult.

The vehicle begins to vibrate excessively.

The vehicle pulls in one direction.

If you have a flat tire, drive slowly to a level spot that is well off the road and out of the way of traffic to change the tire.

Stopping in traffic or on the shoulder of a busy road is dangerous.

WARNING

Be sure to follow the directions for changing a tire:

Changing a tire is dangerous if not done properly. The vehicle can slip off the jack and seriously injure someone. No person should place any portion of their body under a vehicle that is supported by a jack.

Never allow anyone inside a vehicle supported by a jack:

Allowing someone to remain in a vehicle supported by a jack is dangerous. The occupant could cause the vehicle to fall resulting in serious injury.

CAUTION

(With Tire Pressure Monitoring

System)

The wheels equipped on your Mazda are specially designed for installation of the tire pressure sensors. Do not use non-genuine wheels, otherwise it may not be possible to install the tire pressure sensors.

7-6

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page229

Monday, June 18 2012 1:49 PM

Black plate (229,1)

In Case of an Emergency

Flat Tire

NOTE l

Make sure the jack is well lubricated before using it.

(With Tire Pressure Monitoring System) l

Be sure to register the tire pressure sensor

ID signal code whenever tires or wheels are changed (page 5-27).

1. Park on a level surface off the right-ofway and firmly set the parking brake.

2. Put a vehicle with an automatic transaxle in Park (P), a manual transaxle in Reverse (R) or 1, and turn off the engine.

3. Turn on the hazard warning flasher.

4. Have everyone get out of the vehicle and away from the vehicle and traffic.

5. Remove the jack, tool bag, and spare tire (page 7-3).

6. Block the wheel diagonally opposite the flat tire. When blocking a wheel, place a tire block both in front and behind the tire.

Removing a Flat Tire

1. If your vehicle is equipped with a wheel cover, pry off the wheel cover with the beveled end of the jack lever.

NOTE

Force the end of the jack lever firmly between wheel and cover, or removal will be difficult.

CAUTION

There is a valve-stem mark inside the wheel cover. When installing the wheel cover, align this mark with the tire's valve stem.

Damage could occur during installation if the wheel cover is not properly aligned.

NOTE

When blocking a tire, use rocks or wood blocks of sufficient size if possible to hold the tire in place.

7-7

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page230

Monday, June 18 2012 1:49 PM

Black plate (230,1)

In Case of an Emergency

Flat Tire

2. Loosen the lug nuts by turning them counterclockwise one turn each, but do not remove any lug nuts until the tire has been raised off the ground.

5. Place the jack under the jack-up position closest to the tire being changed with the jack head squarely under the jack-up point.

3. Place the jack on the ground.

4. Turn the jack screw in the direction shown in the figure and adjust the jack head so that it is close to the jack-up position.

Jack head

Jacking position

6. Continue raising the jack head gradually by rotating the screw with your hand until the jack head is inserted into the jack-up position.

Tire blocks

Jacking position

7-8

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page231

Monday, June 18 2012 1:49 PM

Black plate (231,1)

In Case of an Emergency

Flat Tire

WARNING

Use only the front and rear jacking positions recommended in this manual:

Attempting to jack the vehicle in positions other than those recommended in this manual is dangerous. The vehicle could slip off the jack and seriously injure or even kill someone. Use only the front and rear jacking positions recommended in this manual.

Do not jack up the vehicle in a position other than the designated jack-up position or place any objects on or under the jack:

Jacking up the vehicle in a position other than the designated jack-up position or placing objects on or under the jack is dangerous as it could deform the vehicle body or the vehicle could fall off the jack resulting in an accident.

Use only the jack provided with your

Mazda:

Using a jack that is not designed for your Mazda is dangerous. The vehicle could slip off the jack and seriously injure someone.

Never place objects under the jack:

Jacking the vehicle with an object under the jack is dangerous. The jack could slip and someone could be seriously injured by the jack or the falling vehicle.

7. Insert the jack lever and attach the lug wrench to tire jack.

8. Turn the lug wrench clockwise and raise the vehicle high enough so that the spare tire can be installed. Before removing the lug nuts, make sure your

Mazda is firmly in position and that it cannot slip or move.

7-9

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page232

Monday, June 18 2012 1:49 PM

Black plate (232,1)

In Case of an Emergency

Flat Tire

WARNING

Do not jack up the vehicle higher than is necessary:

Jacking up the vehicle higher than is necessary is dangerous as it could destabilize the vehicle resulting in an accident.

Do not start the engine or shake the vehicle while it is jacked up:

Starting the engine or shaking the vehicle while it is jacked up is dangerous as it could cause the vehicle to fall off the jack resulting in an accident.

Never go under the vehicle while it is jacked up:

Going under the vehicle while it is jacked up is dangerous as it could result in death or serious injury if the vehicle were to fall off the jack.

9. Remove the lug nuts by turning them counterclockwise; then remove the wheel and center cap.

Locking Lug Nuts

If your vehicle has optional antitheft wheel lug nuts, one on each wheel will lock the tires and you must use a special key to unlock them. This key is attached to the lug wrench and is stored with the spare tire. Register them with the lock manufacturer by filling out the card provided in the glove compartment and mailing it in the accompanying envelope.

If you lose this key, consult an Authorized

Mazda Dealer or use the lock manufacturer's order form, which is with the registration card.

Antitheft lug nut Special key

To remove an antitheft lug nut

1. Obtain the key for the antitheft lug nut.

2. Place the key on top of the nut, and be sure to hold the key square to it. If you hold the key at an angle, you may damage both key and nut. Do not use a power impact wrench.

3. Place the lug wrench on top of the key and apply pressure. Turn the wrench counterclockwise.

7-10

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page233

Monday, June 18 2012 1:49 PM

Black plate (233,1)

In Case of an Emergency

Flat Tire

To install the nut

1. Place the key on top of the nut, and be sure to hold the key square to it. If you hold the key at an angle, you may damage both key and nut. Do not use a power impact wrench.

2. Place the lug wrench on top of the key, apply pressure, and turn it clockwise.

Mounting the Spare Tire

1. Remove dirt and grime from the mounting surfaces of the wheel and hub, including the hub bolts, with a cloth.

3. Install the lug nuts with the beveled edge inward; tighten them by hand.

WARNING

Make sure the mounting surfaces of the wheel, hub and lug nuts are clean before changing or replacing tires:

When changing or replacing a tire, not removing dirt and grime from the mounting surfaces of the wheel, hub and hub bolts is dangerous. The lug nuts could loosen while driving and cause the tire to come off, resulting in an accident.

2. Mount the spare tire.

WARNING

Do not apply oil or grease to lug nuts and bolts and do not tighten the lug nuts beyond the recommended tightening torque:

Applying oil or grease to lug nuts and bolts is dangerous. The lug nuts could loosen while driving and cause the tire to come off, resulting in an accident. In addition, lug nuts and bolts could be damaged if tightened more than necessary.

4. Turn the lug wrench counterclockwise and lower the vehicle. Use the lug wrench to tighten the nuts in the order shown.

7-11

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page234

Monday, June 18 2012 1:49 PM

Black plate (234,1)

In Case of an Emergency

Flat Tire

If you are unsure of how tight the nuts should be, have them inspected at an

Authorized Mazda Dealer.

Nut tightening torque

N·m (kgf·m, ft·lbf) 88

―

118 (9

―

12, 65

―

87)

WARNING

Always securely and correctly tighten the lug nuts:

Improperly or loosely tightened lug nuts are dangerous. The wheel could wobble or come off. This could result in loss of vehicle control and cause a serious accident.

Be sure to reinstall the same nuts you removed or replace them with metric nuts of the same configuration:

Because the wheel studs and lug nuts on your Mazda have metric threads, using a non-metric nut is dangerous.

On a metric stud, it would not secure the wheel and would damage the stud, which could cause the wheel to slip off and cause an accident.

5. Remove the luggage compartment cover. Refer to Luggage Compartment on page 3-13.

6. Remove the belt for securing the flat tire.

7. Return the rear seatback to its original position. Refer to Split-Folding Rear

Seatback on page 2-5.

8. Remove the tire blocks and store the tools and jack.

9. Remove the center cap by tapping it with the lug wrench.

10. Thread the belt through the rear seat as shown in the figure.

7-12

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page235

Monday, June 18 2012 1:49 PM

Black plate (235,1)

In Case of an Emergency

Flat Tire

13. Thread the belt through the buckle while pressing the tire to the seatback.

11. Place the flat tire in the luggage compartment.

14. Pull the belt end to secure the flat tire.

12. Thread the buckle through the wheel as shown in the figure.

7-13

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page236

Monday, June 18 2012 1:49 PM

Black plate (236,1)

In Case of an Emergency

Flat Tire

15. Insert the luggage compartment cover from the top of the luggage compartment opening with the cloth side of the cover facing outward, and slide it between the flat tire and the inside perimeter of the luggage compartment opening.

NOTE

To prevent the jack and tool from rattling, store them properly.

16. Check the tire inflation pressure.

Refer to Tires on page 10-6.

17. Have the flat tire repaired or replaced as soon as possible.

WARNING

Do not drive with any tires that have incorrect air pressure:

Driving on tires with incorrect air pressure is dangerous. Tires with incorrect pressure could affect handling and result in an accident.

When you check the regular tires' air pressure, check the spare tire, too.

NOTE

(With Tire Pressure Monitoring System)

A tire pressure sensor is not installed to the temporary spare tire. The warning light will flash continuously while the temporary spare tire is being used (page 5-25).

7-14

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page237

Monday, June 18 2012 1:49 PM

Black plate (237,1)

In Case of an Emergency

Overheating

If the High engine coolant temperature warning light illuminates, the vehicle loses power, or you hear a loud knocking or pinging noise, the engine is probably too hot.

WARNING

Switch the ignition to off and make sure the fan is not running before attempting to work near the cooling fan:

Working near the cooling fan when it is running is dangerous. The fan could continue running indefinitely even if the engine has stopped and the engine compartment temperature is high. You could be hit by the fan and seriously injured.

Do not remove the cooling system cap when the engine and radiator are hot:

When the engine and radiator are hot, scalding coolant and steam may shoot out under pressure and cause serious injury.

Open the hood ONLY after steam is no longer escaping from the engine:

Steam from an overheated engine is dangerous. The escaping steam could seriously burn you.

If the High engine coolant temperature warning light illuminates:

1. Drive safely to the side of the road and park off the right-of-way.

2. Put a vehicle with an automatic transaxle in park (P), a manual transaxle in neutral.

3. Apply the parking brake.

4. Turn off the air conditioner.

5. Check whether coolant or steam is escaping from under the hood or from the engine compartment.

If steam is coming from the engine compartment:

Do not go near the front of the vehicle.

Stop the engine.

Wait until the steam dissipates, then open the hood and start the engine.

If neither coolant nor steam is escaping:

Open the hood and idle the engine until it cools.

CAUTION

If the cooling fan does not operate while the engine is running, the engine temperature will increase.

Stop the engine and call an

Authorized Mazda Dealer.

6. Make sure the cooling fan is operating, then turn off the engine after the temperature has decreased.

7. When cool, check the coolant reservoir level.

If it's low, look for coolant leaks from the radiator and hoses.

7-15

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page238

Monday, June 18 2012 1:49 PM

In Case of an Emergency

Overheating

If you find a leak or other damage, or if coolant is still leaking:

Stop the engine and call an Authorized

Mazda Dealer.

Cooling fan

If you find no problems, the engine is cool, and no leaks are obvious:

Carefully add coolant as required (page

8-14).

CAUTION

If the engine continues to overheat or frequently overheats, have the cooling system inspected. The engine could be seriously damaged unless repairs are made. Consult an

Authorized Mazda Dealer.

Black plate (238,1)

7-16

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page239

Monday, June 18 2012 1:49 PM

Starting a Flooded Engine

If the engine fails to start, it may be flooded (excessive fuel in the engine).

Follow this procedure:

1. If the engine does not start within five seconds on the first try, switch the ignition off, wait ten seconds and try again.

2. Make sure the parking brake is on.

3. Depress the accelerator all the way and hold it there.

4. Depress the clutch pedal (Manual transaxle) or the brake pedal

(Automatic transaxle).

5. Switch the ignition to START and hold it there

― for up to ten seconds. If the engine starts, release the key and accelerator immediately because the engine will suddenly rev up.

6. If the engine fails to start, crank it without depressing the accelerator

― for up to ten seconds.

If the engine still does not start using the above procedure, have your vehicle inspected by an Authorized Mazda

Dealer.

Black plate (239,1)

In Case of an Emergency

Emergency Starting

7-17

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page240

Monday, June 18 2012 1:49 PM

Black plate (240,1)

In Case of an Emergency

Emergency Starting

Jump-Starting

Jump-starting is dangerous if done incorrectly. So follow the procedure carefully. If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work.

WARNING

Follow These Precautions Carefully:

To ensure safe and correct handling of the battery, read the following precautions carefully before using the battery or inspecting it.

Always wear eye protection when working near the battery:

Working without eye protection is dangerous. Battery fluid contains SULFURIC ACID which could cause blindness if splashed into your eyes. Also, hydrogen gas produced during normal battery operation, could ignite and cause the battery to explode.

Wear eye protection and protective gloves to prevent contact with battery fluid:

Spilled battery fluid is dangerous.

Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets in eyes, skin or clothing. If this happens, immediately flush your eyes with water for 15 minutes or wash your skin thoroughly and get medical attention.

Always keep batteries out of the reach of children:

Allowing children to play near batteries is dangerous. Battery fluid could cause serious injuries if it gets in the eyes or on the skin.

Do not allow the positive ( ) terminal to contact any other metal object that could cause sparks:

Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode. An exploding battery can cause serious burns and injuries. When working near a battery, do not allow metal tools to contact the positive ( ) or negative ( ) terminal of the battery.

7-18

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page241

Monday, June 18 2012 1:49 PM

Black plate (241,1)

In Case of an Emergency

Emergency Starting

Keep all flames, including cigarettes, and sparks away from open battery cells:

Do not jump-start a frozen battery or one with a low fluid level:

Jump-starting a frozen battery or one with a low fluid level is dangerous. It may rupture or explode, causing serious injury.

Connect the negative cable to a good ground point away from the battery:

Connecting the end of the second jumper cable to the negative ( ) terminal of the discharged battery is dangerous.

A spark could cause the gas around the battery to explode and injure someone.

Route the jumper cables away from parts that will be moving:

Connecting a jumper cable near or to moving parts (cooling fans, belts) is dangerous.

The cable could get caught when the engine starts and cause serious injury.

CAUTION

Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and other electrical parts beyond repair with a 24 V power supply (two 12 V batteries in series or a 24 V motor generator set).

Connect cables in numerical order and disconnect in reverse order.

Discharged battery

Booster battery

Jumper cables

7-19

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page242

Monday, June 18 2012 1:49 PM

Black plate (242,1)

In Case of an Emergency

Emergency Starting

1. Remove the battery cover from its rear side.

6. When finished, carefully disconnect the cables in the reverse order described in the illustration.

7. If the battery cover has been removed, install it in the reverse order of removal.

NOTE

Verify that the covers are securely installed.

2. Make sure the booster battery is 12 V and that its negative terminal is grounded.

3. If the booster battery is in another vehicle, don't allow both vehicles to touch. Turn off the engine of the vehicle with the booster battery and all unnecessary electrical loads in both vehicles.

4. Connect the jumper cables in the exact sequence as in the illustration.

l l l l

Connect one end of a cable to the positive terminal on the discharged battery (1).

Attach the other end to the positive terminal on the booster battery (2).

Connect one end of the other cable to the negative terminal of the booster battery (3).

Connect the other end to the ground point indicated in the illustration away from the discharged battery

(4).

5. Start the engine of the booster vehicle and run it a few minutes. Then start the engine of the other vehicle.

7-20

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page243

Monday, June 18 2012 1:49 PM

Push-Starting

Do not push-start your Mazda.

WARNING

Never tow a vehicle to start it:

Towing a vehicle to start it is dangerous. The vehicle being towed could surge forward when its engine starts, causing the two vehicles to collide. The occupants could be injured.

CAUTION

Do not push-start a vehicle that has a manual transaxle. It can damage the emission control system.

NOTE

You can't start a vehicle with an automatic transaxle by pushing it.

Black plate (243,1)

In Case of an Emergency

Emergency Starting

Downloaded from

Form No.8CL7-EA-12H

7-21

Mazda2_8CL7-EA-12H_Edition1 Page244

Monday, June 18 2012 1:49 PM

In Case of an Emergency

Emergency Towing

Towing Description

We recommend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service.

Proper lifting and towing are necessary to prevent damage to the vehicle.

Government and local laws must be followed.

A towed vehicle usually should have its drive wheels (front wheels) off the ground. If excessive damage or other conditions prevent this, use wheel dollies.

Black plate (244,1)

CAUTION

Do not tow the vehicle pointed backward with driving wheels on the ground. This may cause internal damage to the transaxle.

Wheel dollies

CAUTION

Do not tow with sling-type equipment. This could damage your vehicle. Use wheel-lift or flatbed equipment.

When towing with the rear wheels on the ground, release the parking brake.

7-22

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page245

Monday, June 18 2012 1:49 PM

Black plate (245,1)

In Case of an Emergency

Emergency Towing

3. Securely install the tiedown eyelet using the lug wrench.

Tiedown Hooks

CAUTION

Do not use the front and rear tiedown eyelets for towing the vehicle.

They have been designed only for securing the vehicle to a transport vessel during shipping.

Using the eyelets for any other purpose could result in the vehicle being damaged.

Tiedown Hook-Front

1. Remove the tiedown eyelet, lug wrench, and jack lever from the trunk

(page 7-3).

2. Wrap the jack lever with a soft cloth to prevent damage to the bumper and open the cap located on the front bumper.

Lug wrench

Tiedown eyelet

4. Hook the tying rope to the tiedown eyelet.

Tiedown eyelet

CAUTION

If the tiedown eyelet is not securely tightened, it may loosen or disengage from the bumper when tying down the vehicle. Make sure that the tiedown eyelet is securely tightened to the bumper.

CAUTION

The cap cannot be completely removed. Do not use excessive force as it may damage the cap or scratch the painted bumper surface.

7-23

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page246

Monday, June 18 2012 1:49 PM

In Case of an Emergency

Emergency Towing q

Tiedown Hook-Rear

Black plate (246,1)

Recreational Towing

An example of

“ recreational towing

” is towing your vehicle behind a motorhome.

The transaxle is not designed for towing this vehicle on all 4 wheels.

When doing recreational towing refer to

“

Towing Description

”

(page 7-22) and

“

Tiedown Hook

”

(page 7-23) and carefully follow the instructions.

CAUTION

The rear tiedown hook is designed only for lashing the vehicle during overseas transport. Do not use the rear tiedown hook for any other use such as transporting the vehicle on trucks or railway.

7-24

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page247

Monday, June 18 2012 1:49 PM

Black plate (247,1)

Maintenance and Care

How to keep your Mazda in top condition.

Introduction .................................................................................. 8-2

Introduction ............................................................................... 8-2

Scheduled Maintenance ................................................................ 8-4

Scheduled Maintenance (USA, Canada, and Puerto Rico) ....... 8-4

Owner Maintenance ..................................................................... 8-9

Owner Maintenance Schedule .................................................. 8-9

Owner Maintenance Precautions ............................................. 8-10

Engine Compartment Overview .............................................. 8-12

Engine Oil ............................................................................... 8-13

Engine Coolant ....................................................................... 8-14

Brake/Clutch Fluid .................................................................. 8-16

Automatic transaxle Fluid (ATF)

......................................... 8-17

Washer Fluid ........................................................................... 8-19

Body Lubrication .................................................................... 8-20

Wiper Blades ........................................................................... 8-20

Battery ..................................................................................... 8-24

Tires ........................................................................................ 8-27

Light Bulbs ............................................................................. 8-32

Fuses ....................................................................................... 8-39

Appearance Care ........................................................................ 8-45

How to Minimize Environmental Paint Damage .................... 8-45

Exterior Care ........................................................................... 8-47

Interior Care ............................................................................ 8-51

Some models.

8-1

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page248

Monday, June 18 2012 1:49 PM

Black plate (248,1)

Maintenance and Care

Introduction

Be extremely careful and prevent injury to yourself and others or damage to your vehicle when using this manual for inspection and maintenance.

If you are unsure about any procedure it describes, we strongly urge you to have a reliable and qualified service shop perform the work, preferably an Authorized Mazda Dealer.

Factory-trained Mazda technicians and genuine Mazda parts are best for your vehicle.

Without this expertise and the parts that have been designed and made especially for your

Mazda, inadequate, incomplete, and insufficient servicing may result in problems. This could lead to vehicle damage or an accident and injuries.

For expert advice and quality service, consult an Authorized Mazda Dealer.

To continue warranty eligibility and to protect your investment, it is your responsibility to properly maintain your vehicle according to factory recommended schedules outlined in this manual. As part of this you must keep your maintenance records, receipts, repair orders and any other documents as evidence this maintenance was performed. You must present these documents, should any warranty coverage disagreement occur. Failure to do so can result in your warranty being voided either in whole or in part.

This evidence may consist of the following: l

The Mazda Scheduled Maintenance Record, refer to the Warranty Booklet, must be completely filled out showing mileage, repair order number, date for each service, and signed by a qualified automotive service technician who service vehicles.

l l

Original copies of repair orders or other receipts that include the mileage and date the vehicle was serviced. Each receipt should be signed by a qualified automotive service technician.

For self maintenance, a statement that you completed the maintenance yourself, displaying mileage and the date the work was performed. Also, receipts for the replacement parts (fluid, filters, etc.) indicating the date and mileage must accompany this statement.

NOTE

If you elect to perform maintenance yourself or have your vehicle serviced at a location other than an

Authorized Mazda Dealer, Mazda requires that all fluids, parts and materials must meet Mazda standards for durability and performance as described in this manual.

Claims against the warranty resulting from lack of maintenance, as opposed to defective materials or authorized Mazda workmanship, will not be honored.

8-2

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page249

Monday, June 18 2012 1:49 PM

Black plate (249,1)

Maintenance and Care

Introduction

Any auto repair shop using parts equivalent to your Mazda's original equipment may perform maintenance.

But we recommend that it always be done by an Authorized

Mazda Dealer using genuine Mazda parts.

Downloaded from

Form No.8CL7-EA-12H

8-3

Mazda2_8CL7-EA-12H_Edition1 Page250

Monday, June 18 2012 1:49 PM

Black plate (250,1)

Maintenance and Care

Scheduled Maintenance

Scheduled Maintenance (USA, Canada, and Puerto Rico)

Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions apply.

Repeated short-distance driving l l

Driving in dusty conditions

Driving with extended use of brakes l l l l

Driving in areas where salt or other corrosive materials are used

Driving on rough or muddy roads

Extended periods of idling or low-speed operation

Driving for long periods in cold temperatures or extremely humid climates l l

Driving in extremely hot conditions

Driving in mountainous conditions continually

If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).

NOTE

After the prescribed period, continue to follow the described maintenance at the recommended intervals.

8-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page251

Monday, June 18 2012 1:49 PM

Black plate (251,1)

Maintenance and Care

Scheduled Maintenance q

Schedule 1

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months 6 12 18 24 30 36 42

×1000 km 12

×1000 miles 7.5

22.5

37.5

52.5

ENGINE

Engine valve clearance

Drive belts

Engine oil

Engine oil filter

COOLING SYSTEM

FL22 type

Engine coolant

Others

FUEL SYSTEM

Air filter

Fuel lines and hoses

Hoses and tubes for emission

IGNITION SYSTEM

Spark plugs

CHASSIS and BODY

Brake lines, hoses and connections

Disc brakes

Drum brakes

Tire (Rotation)

Steering operation and linkages

Front and rear suspension, ball joints and wheel bearing axial play

Driveshaft dust boots

Bolts and nuts on chassis and body

Exhaust system and heat shields

All locks and hinges

Audibly inspect every 120,000 km (75,000 miles), if noisy,

R adjust

Replace at first 192,000 km (120,000 miles) or 10 years; after that, every 96,000 km (60,000 miles) or 5 years

Replace at first 96,000 km (60,000 miles) or 4 years; after that, every 2 years

C C

R C

Replace every 120,000 km (75,000 miles)

Rotate every 12,000 km (7,500 miles)

Inspect every 72,000 km (45,000 miles) or 5 years

L L L L L L

8-5

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page252

Monday, June 18 2012 1:49 PM

Black plate (252,1)

Maintenance and Care

Scheduled Maintenance

Maintenance Interval

AIR CONDITIONER SYSTEM

Cabin air filter

Number of months or kilometers (miles), whichever comes first

Months 6 12 18 24 30 36 42

×1000 km 12

×1000 miles 7.5

22.5

37.5

52.5

R R

Chart symbols:

Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.

R: Replace

C: Clean

Lubricate

T: Tighten

Remarks:

*1 Use FL22 type coolant in vehicles with the inscription

“

FL22

” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.

*2 According to state/provincial and federal regulations, failure to perform maintenance on these items will not void your emissions warranties. However, Mazda recommends that all maintenance services be performed at the recommended time or mileage/kilometer period to ensure long-term reliability.

8-6

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page253

Monday, June 18 2012 1:49 PM

Black plate (253,1)

Maintenance and Care

Scheduled Maintenance q

Schedule 2

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months 4 8 12 16 20 24 28 32 36 40 44 48

×1000 km 8 16 24 32 40 48 56 64 72 80 88 96

×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60

ENGINE

Engine valve clearance

Drive belts

Engine oil

Engine oil filter

COOLING SYSTEM

Puerto Rico

Others

FL22 type

Engine coolant

Others

Engine coolant level

FUEL SYSTEM

Air filter

Fuel lines and hoses

Hoses and tubes for emission

IGNITION SYSTEM

Spark plugs

ELECTRICAL SYSTEM

Function of all lights

Puerto Rico

Others

Audibly inspect every 120,000 km (75,000 miles), if noisy,

R R

I adjust

Replace every 5,000 km (3,000 miles) or 3 months

R R R R R R R R R R R R

Replace at first 192,000 km (120,000 miles) or 10 years; after that, every 96,000 km (60,000 miles) or 5 years

Replace at first 96,000 km (60,000 miles) or 4 years; after that, every 2 years

Replace every 120,000 km (75,000 miles)

8-7

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page254

Monday, June 18 2012 1:49 PM

Black plate (254,1)

Maintenance and Care

Scheduled Maintenance

Maintenance Interval

Number of months or kilometers (miles), whichever comes first

Months 4 8 12 16 20 24 28 32 36 40 44 48

×1000 km 8 16 24 32 40 48 56 64 72 80 88 96

×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60

CHASSIS and BODY

Brake lines, hoses and connections

Brake fluid level

Disc brakes

Drum brakes

Tire (Rotation)

Tire inflation pressure and tire wear

Steering operation and linkages

Power steering fluid level

Front and rear suspension, ball joints and wheel bearing axial play

Driveshaft dust boots

Bolts and nuts on chassis and body

Exhaust system and heat shields

All locks and hinges

Washer fluid level

AIR CONDITIONER SYSTEM

Cabin air filter

Inspect every 72,000 km (45,000 miles) or 5 years

Rotate every 8,000 km (5,000 miles)

I I I I I I I

I I I

I I I I

Replace every 40,000 km (25,000 miles) or 2 years

L L L L L L L L L L L L

Chart symbols:

I: Inspect: Inspect and clean, repair, adjust, fill up, or replace if necessary.

Replace

C: Clean

Lubricate

T: Tighten

Remarks:

*1 Use FL22 type coolant in vehicles with the inscription

“

FL22

” on the radiator cap itself or the surrounding area. Use FL22 when replacing the coolant.

8-8

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page255

Monday, June 18 2012 1:49 PM

Black plate (255,1)

Maintenance and Care

Owner Maintenance

Owner Maintenance Schedule

The owner or a qualified service technician should make these vehicle inspections at the indicated intervals to ensure safe and dependable operation.

Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.

When Refueling

l l l l

Brake and clutch fluid level (page 8-16)

Engine coolant level (page 8-14)

Engine oil level (page 8-13)

Washer fluid level (page 8-19) q

At Least Monthly

Tire inflation pressures (page 8-27) q

At Least Twice a Year (For Example, Every Spring and Fall)

Automatic transaxle fluid level (page 8-17)

You can do the following scheduled maintenance items if you have some mechanical ability and a few basic tools and if you closely follow the directions in this manual.

Engine coolant (page 8-14) l

Engine oil (page 8-13)

8-9

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page256

Monday, June 18 2012 1:49 PM

Black plate (256,1)

Maintenance and Care

Owner Maintenance

Owner Maintenance Precautions

Improper or incomplete service may result in problems. This section gives instructions only for items that are easy to perform.

As explained in the Introduction (page 8-2), several procedures can be done only by a qualified service technician with special tools.

Improper owner maintenance during the warranty period may affect warranty coverage.

Refer to Introduction (page 8-2) for owner's responsibility in protecting your investment.

For details, read the separate Mazda Warranty statement provided with the vehicle. If you are unsure about any servicing or maintenance procedure, have it done by an Authorized

Mazda Dealer.

There are strict environmental laws regarding the disposal of waste oil and fluids. Please dispose of your waste properly and with due regard to the environment.

We recommend that you entrust the oil and fluid changes of your vehicle to an Authorized

Mazda Dealer.

8-10

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page257

Monday, June 18 2012 1:49 PM

Black plate (257,1)

Maintenance and Care

Owner Maintenance

WARNING

Do not perform maintenance work if you lack sufficient knowledge and experience or the proper tools and equipment to do the work. Have maintenance work done by a qualified technician:

Performing maintenance work on a vehicle is dangerous if not done properly. You can be seriously injured while performing some maintenance procedures.

If you must run the engine while working under the hood, make certain that you remove all jewelry (especially rings, bracelets, watches, and necklaces) and all neckties, scarves, and similar loose clothing before getting near the engine or cooling fan which may turn on unexpectedly:

Working under the hood with the engine running is dangerous. It becomes even more dangerous when you wear jewelry or loose clothing.

Either can become entangled in moving parts and result in injury.

Switch the ignition to off and make sure the fan is not running before attempting to work near the cooling fan:

Do not leave items in the engine compartment:

After you have finished checking or doing servicing in the engine compartment, do not forget and leave items such as tools or rags in the engine compartment.

Tools or other items left in the engine compartment could cause engine damage or a fire leading to an unexpected accident.

8-11

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page258

Monday, June 18 2012 1:49 PM

Maintenance and Care

Owner Maintenance

Engine Compartment Overview

Black plate (258,1)

Engine oil dipstick

Automatic transaxle fluid-level dipstick (only for automatic transaxle)

Brake/Clutch fluid reservoir

Battery Fuse block

Engine oil-filler cap

Cooling system cap

Engine coolant reservoir

Windshield washer fluid reservoir

8-12

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page259

Monday, June 18 2012 1:49 PM

Black plate (259,1)

Maintenance and Care

Owner Maintenance

Engine Oil

NOTE

Changing the engine oil should be performed by an Authorized Mazda Dealer.

Refer to Introduction (page 8-2) for owner's responsibility in protecting your investment.

Recommended Oil

U.S.A. and CANADA

0W-20 full synthetic recommended:

Mazda Genuine Oil is used in your Mazda vehicle and is the recommended 0W-20 lubricant. Mazda Genuine 0W-20 Oil is required to achieve optimum fuel economy.

Recommended viscosity: SAE 0W-20

For maintenance service, Mazda recommends Mazda Genuine Parts and

Castrol

(U.S.A. only).

Only use SAE 0W-20 oil with the

American Petroleum Institute (API) symbol and ILSAC GF-4/GF-5.

Oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International

Lubricant Standardization and Approval

Committee (ILSAC), comprised of U.S.

and Japanese automobile manufacturers.

–40

–30

–20

–10

30 40 50

–40 –20

40 60

80 100

120 q

Inspecting Engine Oil Level

1. Be sure the vehicle is on a level surface.

2. Warm up the engine to normal operating temperature.

3. Turn it off and wait at least 5 minutes for the oil to return to the oil pan.

(ILSAC)

8-13

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page260

Monday, June 18 2012 1:49 PM

Black plate (260,1)

Maintenance and Care

Owner Maintenance

4. Pull out the dipstick, wipe it clean, and reinsert it fully.

Full

Low

Engine Coolant

Inspecting Coolant Level

WARNING

Do not use a match or live flame in the engine compartment. DO NOT ADD

COOLANT WHEN THE ENGINE IS HOT:

A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot. You could be burned.

Carefully inspect the engine coolant in the coolant reservoir, but do not open it.

5. Pull it out again and examine the level.

The level is normal if it is between

Low and Full.

If it is near or below Low, add enough oil to bring the level to Full.

CAUTION

Do not add engine oil over Full. This may cause engine damage.

6. Make sure the O-ring on the dipstick is positioned properly before reinserting the dipstick.

Switch the ignition to off and make sure the fan is not running before attempting to work near the cooling fan:

Do not remove the cooling system cap when the engine and radiator are hot:

When the engine and radiator are hot, scalding coolant and steam may shoot out under pressure and cause serious injury.

NOTE

Changing the coolant should be done by an

Authorized Mazda Dealer.

8-14

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page261

Monday, June 18 2012 1:49 PM

Inspect the antifreeze protection and coolant level in the coolant reservoir at least once a year

― at the beginning of the winter season

― and before traveling where temperatures may drop below freezing.

Inspect the condition and connections of all cooling system and heater hoses.

Replace any that are swollen or deteriorated.

The coolant should be at full in the radiator and between the FULL and LOW marks on the coolant reservoir when the engine is cool.

Cooling fan

Black plate (261,1)

Maintenance and Care

Owner Maintenance

CAUTION

Radiator coolant will damage paint.

Rinse it off quickly if spilled.

Use only soft (demineralized) water in the coolant mixture.

Water that contains minerals will cut down on the coolant's effectiveness.

Do not add only water. Always add a proper coolant mixture.

The engine has aluminum parts and must be protected by an ethylene-glycol-based coolant to prevent corrosion and freezing.

DO NOT USE coolants Containing

Alcohol, methanol, Borate or

Silicate.

These coolants could damage the cooling system.

DO NOT MIX alcohol or methanol with the coolant. This could damage the cooling system.

Do not use a solution that contains more than 60% antifreeze.

This would reduce effectiveness.

If it is at or near LOW, add enough coolant to the coolant reservoir to provide freezing and corrosion protection and to bring the level to FULL.

Securely tighten the coolant reservoir tank cap after adding coolant.

8-15

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page262

Monday, June 18 2012 1:49 PM

Black plate (262,1)

Maintenance and Care

Owner Maintenance

NOTE

If the

“

FL22

” mark is shown on or near the cooling system cap, it is recommended to use

Mazda Genuine FL22 engine coolant (page

8-4).

Brake/Clutch Fluid

Inspecting Brake/Clutch Fluid Level

The brakes and clutch draw fluid from the same reservoir.

Inspect the fluid level in the reservoir regularly. It should be kept at MAX.

The level normally drops with accumulated distance, a condition associated with wear of brake and clutch linings. If it is excessively low, have the brake/clutch system inspected by an

Authorized Mazda Dealer.

MAX fill line

If the coolant reservoir is empty or new coolant is required frequently, consult an

Authorized Mazda Dealer.

MIN fill line

8-16

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page263

Monday, June 18 2012 1:49 PM

Black plate (263,1)

Maintenance and Care

Owner Maintenance q

Adding Brake/Clutch Fluid

WARNING

Be careful not to spill brake fluid on yourself or on the engine:

Spilled brake fluid is dangerous. If it gets in your eyes, they could be seriously injured. If this happens, immediately flush your eyes with water and get medical attention.

Brake fluid spilled on a hot engine could cause a fire.

If the brake/clutch fluid level is low, have the brakes and clutch inspected:

Low brake/clutch fluid levels are dangerous. Low levels could signal brake lining wear or a brake system leak. Your brakes could fail and cause an accident.

If the fluid level is low, add fluid until it reaches MAX.

Before adding fluid, thoroughly clean the area around the cap.

CAUTION

Brake and clutch fluid will damage painted surfaces. If brake or clutch fluid does get on a painted surface, wash it off with water immediately.

Using nonspecified brake and clutch fluids (page 10-4) will damage the systems. Mixing different fluids will also damage them.

If the brake/clutch system frequently requires new fluid, consult an Authorized Mazda

Dealer.

Automatic transaxle Fluid

(ATF)

í q

Inspecting Automatic transaxle

Fluid Level

The automatic transaxle fluid level should be inspected regularly. Measure it as described below.

The volume of fluid changes with temperature. Fluid must be checked while idling the engine without driving at normal operating temperature.

CAUTION

Low fluid level causes transaxle slippage. Overfilling can cause foaming, loss of fluid, and transaxle malfunction.

Use specified fluid (page 10-4). A nonspecified fluid could result in transaxle malfunction and failure.

1. Park on a level surface and set the parking brake firmly.

2. Start the engine and depress the brake pedal.

3. Move the shift lever through all ranges and set it at P.

WARNING

Make sure the brake pedal is applied before shifting the shift lever:

Shifting the shift lever without first depressing the brake pedal is dangerous. The vehicle could move suddenly and cause an accident.

4. With the engine still idling, pull out the dipstick, wipe it clean, and put it back.

Some models.

8-17

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page264

Monday, June 18 2012 1:49 PM

Black plate (264,1)

Maintenance and Care

Owner Maintenance

5. Pull it out again.

The proper fluid level is marked on the dipstick as follows.

Full

Low

Full

Low

Fully insert the dipstick. When adding fluid, inspect with the dipstick to make sure it doesn't pass full.

NOTE

Inspect the fluid on both sides of the dipstick in a well lit area for an accurate reading.

Fluid hot scale A

When the vehicle has been driven and the fluid is at normal operating temperature, about 65°C (150°F), the level must be between Full and Low.

Fluid cold scale B

When the engine has not been running and the outside temperature is about 20°C

(70°F), the level must be between Full and Low.

CAUTION

Use the cold scale only as a reference.

If outside temperature is lower than about 20°C (70°F), start the engine and inspect the fluid level after the engine reaches operating temperature.

If the vehicle has been driven for an extended period at high speeds or in city traffic in hot weather, inspect the level only after stopping the engine and allowing the fluid to cool for 30 minutes.

8-18

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page265

Monday, June 18 2012 1:49 PM

Black plate (265,1)

Maintenance and Care

Owner Maintenance

Washer Fluid

Inspecting Washer Fluid Level

WARNING

Use only windshield washer fluid or plain water in the reservoir:

Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibility, and could result in an accident.

Using Washer Fluid Without Anti-freeze

Protection in Cold Weather:

Operating your vehicle in temperatures below 4 degrees C (40 degrees F) using washer fluid without anti-freeze protection is dangerous as it could cause impaired windshield vision and result in an accident. In cold weather, always use washer fluid with anti-freeze protection.

NOTE

State or local regulations may restrict the use of volatile organic compounds (VOCs), which are commonly used as anti-freeze agents in washer fluid. A washer fluid with limited VOC content should be used only if it provides adequate freeze resistance for all regions and climates in which the vehicle will be operated.

Inspect fluid level in the washer fluid reservoir; add fluid if necessary.

The top of the float should be between F and E.

Use plain water if washer fluid is unavailable.

But use only washer fluid in cold weather to prevent it from freezing.

NOTE

Front and rear washer fluid is supplied from the same reservoir.

8-19

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page266

Monday, June 18 2012 1:49 PM

Black plate (266,1)

Maintenance and Care

Owner Maintenance

Body Lubrication

All moving points of the body, such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather.

Make sure the hood's secondary latch keeps the hood from opening when the primary latch is released.

Wiper Blades

CAUTION

Hot waxes applied by automatic car washers have been known to affect the wiper's ability to clean windows.

To prevent damage to the wiper blades, do not use gasoline, kerosene, paint thinner, or other solvents on or near them.

When the wiper lever is in the

AUTO position and the ignition is switched ON, the wipers may move automatically in the following cases:

If the windshield above the rain

Ø sensor is touched.

If the windshield above the rain sensor is wiped with a cloth.

If the windshield is struck with

Ø a hand or other object.

If the rain sensor is struck with a hand or other object from inside the vehicle.

Be careful not to pinch hands or fingers as it may cause injury, or damage the wipers. When washing or servicing your Mazda, make sure the wiper lever is in the

OFF position.

Contamination of either the windshield or the blades with foreign matter can reduce wiper effectiveness. Common sources are insects, tree sap, and hot wax treatments used by some commercial car washes.

If the blades are not wiping properly, clean the window and blades with a good cleaner or mild detergent; then rinse thoroughly with clean water. Repeat if necessary.

8-20

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page267

Monday, June 18 2012 1:49 PM

Black plate (267,1)

Maintenance and Care

Owner Maintenance q

Replacing Windshield Wiper Blades

When the wipers no longer clean well, the blades are probably worn or cracked.

Replace them.

CAUTION

To prevent damage to the wiper arms and other components, don't try to sweep the wiper arm by hand.

1. Raise the wiper arm and turn the blade assembly to expose the plastic locking clip.

Compress the clip and slide the assembly downward; then lift it off the arm.

2. Hold the end of the rubber and pull until the tabs are free of the metal support.

Tab

Metal support

3. Remove the metal stiffeners from each blade rubber and install them in the new blade.

Plastic locking clip

CAUTION

To prevent damage to the windshield let the wiper arm down easily, don't let it slap down on the windshield.

8-21

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page268

Monday, June 18 2012 1:49 PM

Black plate (268,1)

Maintenance and Care

Owner Maintenance

CAUTION

Don't bend or discard the stiffeners. You need to use them again.

If the metal stiffeners are switched, the blade's wiping efficiency could be reduced.

So don't use the driver's side metal stiffeners on the passenger's side, or vice versa.

Be sure to reinstall the metal stiffeners in the new blade rubber so that the curve is the same as it was in the old blade rubber.

4. Carefully insert the new blade rubber.

Then install the blade assembly in the reverse order of removal.

CAUTION

To prevent damage to the wiper arm and other components, do not try to sweep the wiper arm by hand.

1. Raise the wiper arm.

NOTE

The wiper arm will not remain lifted off the rear window after being pulled up.

When replacing the wiper blade, continue holding the wiper arm with one hand during the work.

2. Firmly rotate the wiper blade to the right until it unlocks, then remove the blade.

NOTE

Install the blade so that the tabs are toward the bottom of the wiper arm.

Replacing Rear Window Wiper

Blade

When the wiper no longer cleans well, the blade is probably worn or cracked.

Replace it.

8-22

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page269

Monday, June 18 2012 1:49 PM

Black plate (269,1)

CAUTION

To prevent damage to the rear window let the wiper arm down easily, do not let it slap down on the rear window.

3. Pull down the blade rubber and slide it out of the blade holder.

Maintenance and Care

Owner Maintenance

5. Carefully insert the new blade rubber.

Then install the blade assembly in the reverse order of removal.

4. Remove the metal stiffeners from each blade rubber and install them in the new blade.

CAUTION

Do not bend or discard the stiffeners.

You need to use them again.

Downloaded from

Form No.8CL7-EA-12H

8-23

Mazda2_8CL7-EA-12H_Edition1 Page270

Monday, June 18 2012 1:49 PM

Black plate (270,1)

Maintenance and Care

Owner Maintenance

Battery

WARNING

Wash hands after handling the battery and related accessories:

Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm.

Read the following precautions carefully before using the battery or inspecting to ensure safe and correct handling:

Always wear eye protection when working near the battery:

Wear eye protection and protective gloves to prevent contact with battery fluid:

Spilled battery fluid is dangerous.

Battery fluid contains SULFURIC ACID which could cause serious injuries if it gets in eyes, or on the skin or clothing. If this happens, immediately flush your eyes with water for 15 minutes or wash your skin thoroughly and get medical attention.

Always keep batteries out of the reach of children:

Allowing children to play near batteries is dangerous. Battery fluid could cause serious injuries if it gets in the eyes or on the skin.

Keep flames and sparks away from open battery cells and do not allow metal tools to contact the positive ( ) or negative ( ) terminal of the battery when working near a battery. Do not allow the positive ( ) terminal to contact the vehicle body:

Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode. An exploding battery can cause serious burns and injuries. Keep all flames including cigarettes and sparks away from open battery cells.

8-24

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page271

Monday, June 18 2012 1:49 PM

Black plate (271,1)

Maintenance and Care

Owner Maintenance

Keep all flames, including cigarettes, and sparks away from open battery cells:

Downloaded from

Form No.8CL7-EA-12H

8-25

Mazda2_8CL7-EA-12H_Edition1 Page272

Monday, June 18 2012 1:49 PM

Black plate (272,1)

Maintenance and Care

Owner Maintenance

NOTE

Remove the battery cover before performing battery maintenance.

Inspecting Electrolyte Level

A low level of electrolyte fluid will cause the battery to discharge quickly.

Battery Maintenance

To get the best service from a battery: l

Keep it securely mounted.

l l

Keep the top clean and dry.

Keep terminals and connections clean, l tight, and coated with petroleum jelly or terminal grease.

Rinse off spilled electrolyte immediately with a solution of water l and baking soda.

If the vehicle will not be used for an extended time, disconnect the battery cables.

When replacing the battery, refer to the specification charts (page 10-4).

8-26

Downloaded from

Form No.8CL7-EA-12H

Upper level

Lower level

Inspect the electrolyte level at least once a week. If it's low, remove the caps and add enough distilled water to bring the level between the upper and lower level

(illustration).

Don't overfill.

Examine the specific gravity of the electrolyte with a hydrometer, especially during cold weather. If it's low, recharge the battery.

Mazda2_8CL7-EA-12H_Edition1 Page273

Monday, June 18 2012 1:50 PM

Black plate (273,1)

Tires

For reasons of proper performance, safety, and better fuel economy, always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribution.

WARNING

Using Different Tire Types:

Driving your vehicle with different types of tires is dangerous. It could cause poor handling and poor braking; leading to loss of control.

Except for the limited use of the temporary spare tire, use only the same type tires (radial, bias-belted, bias-type) on all four wheels.

Using Wrong-Sized Tires:

Using any other tire size than what is specified for your Mazda (page 10-6) is dangerous. It could seriously affect ride, handling, ground clearance, tire clearance, and speedometer calibration. This could cause you to have an accident. Use only tires that are the correct size specified for your

Mazda.

Maintenance and Care

Owner Maintenance q

Tire Inflation Pressure

WARNING

Always inflate the tires to the correct pressure:

Overinflation or underinflation of tires is dangerous. Adverse handling or unexpected tire failure could result in a serious accident.

Refer to Tires on page 10-6.

Use only a Mazda-genuine tire valve cap:

Use of a non-genuine part is dangerous as the correct tire air pressure cannot be maintained if the tire valve becomes damaged. If the vehicle is driven under this condition, the tire air pressure will decrease which could result in a serious accident. Do not use any part for the tire valve cap that is not a Mazdagenuine part.

8-27

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page274

Monday, June 18 2012 1:50 PM

Black plate (274,1)

Maintenance and Care

Owner Maintenance

The Tire Pressure Monitoring System

í does not alleviate the need to check the tire condition every day, including whether the tires all look inflated properly.

Inspect all tire pressure monthly

(including the spare) when the tires are cold. Maintain recommended pressures for the best ride, handling, and minimum tire wear.

When checking the tire pressures, use of a digital tire pressure gauge is recommended.

Refer to the specification charts (page

10-6).

NOTE l l l l

Always check tire pressure when tires are cold.

Warm tires normally exceed recommended pressures. Don't release air from warm tires to adjust the pressure.

Underinflation can cause reduced fuel economy, uneven and accelerated tire wear, and poor sealing of the tire bead, which will deform the wheel and cause separation of tire from rim.

Overinflation can produce a harsh ride, uneven and accelerated tire wear, and a greater possibility of damage from road hazards.

Keep your tire pressure at the correct levels. If one frequently needs inflating, have it inspected.

Tire Rotation

WARNING

Rotate tires periodically:

Irregular tire wear is dangerous. To equalize tread wear for maintaining good performance in handling and braking, rotate the tires according to the scheduled maintenance charts.

Refer to Scheduled Maintenance on page 8-4.

8-28

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page275

Monday, June 18 2012 1:50 PM

Black plate (275,1)

Maintenance and Care

Owner Maintenance

During rotation, inspect them for correct balance.

Forward

Do not include (TEMPORARY USE ONLY) spare tire in rotation.

Also, inspect them for uneven wear and damage. Abnormal wear is usually caused by one or a combination of the following: l l l l

Incorrect tire pressure

Improper wheel alignment

Out-of-balance wheel

Severe braking

After rotation, inflate all tire pressures to specification (page 10-6) and inspect the lug nuts for tightness.

CAUTION

Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or studs only from front to rear, not from side to side. Tire performance will be reduced if rotated from side to side.

Replacing a Tire

WARNING

Always use tires that are in good condition:

Driving with worn tires is dangerous.

Reduced braking, steering, and traction could result in an accident.

Replace all four tires at the same time:

Replacing just one tire is dangerous.

It could cause poor handling and poor braking resulting in loss of vehicle control. Mazda strongly recommends that you replace all four tires at the same time.

CAUTION

(With Tire Pressure Monitoring

System)

When replacing/repairing the tires or wheels or both, have the work done by an Authorized Mazda Dealer, or the tire pressure sensors may be damaged.

NOTE

(With Tire Pressure Monitoring System) l

When tires with steel wire reinforcement in the sidewalls are used, the system may not function correctly even with a genuine l wheel.

Refer to System Error Activation on page

5-27.

Be sure to install the tire pressure sensors whenever tires or wheels are replaced.

Refer to Tires and Wheels on page 5-27.

8-29

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page276

Monday, June 18 2012 1:50 PM

Black plate (276,1)

Maintenance and Care

Owner Maintenance

If a tire wears evenly, a wear indicator will appear as a solid band across the tread.

Replace the tire when this happens.

Tread wear indicator

New tread Worn tread

You should replace the tire before the band crosses the entire tread.

NOTE

Tires degrade over time, even when they are not being used on the road. It is recommended that tires generally be replaced when they are

6 years or older. Heat caused by hot climates or frequent high loading conditions can accelerate the aging process. You should replace the spare tire when you replace the other road tires due to the aging of the spare tire. The period in which the tire was manufactured (both week and year) is indicated by a 4-digit number.

Refer to Tire Labeling on page 9-22.

Temporary Spare Tire

Inspect the temporary spare tire at least monthly to make sure it's properly inflated and stored.

NOTE

The temporary spare tire condition gradually deteriorates even if it has not been used.

The temporary spare tire is easier to handle because of its construction which is lighter and smaller than a conventional tire. This tire should be used only for an emergency and only for a short distance.

Use the temporary spare tire only until the conventional tire is repaired, which should be as soon as possible.

Maintain its pressure at 420 kPa (4.2

kgf/cm

2 or bar, 60 psi).

CAUTION

Do not use your temporary spare tire rim with a snow tire or a conventional tire. Neither will properly fit and could damage both tire and rim.

The temporary spare tire has a tread life of less than 5,000 km

(3,000 miles). The tread life may be shorter depending on driving conditions.

The temporary spare tire is for limited use, however, if the tread wear solid-band indicator appears, replace the tire with the same type of temporary spare

(page 8-29).

NOTE

Tires degrade over time, even when they are not being used on the road. It is recommended that tires generally be replaced when they are

Refer to Tire Labeling on page 9-22.

8-30

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page277

Monday, June 18 2012 1:50 PM

Black plate (277,1)

Maintenance and Care

Owner Maintenance q

Replacing a Wheel

WARNING

Always use wheels of the correct size on your vehicle:

Using a wrong-sized wheel is dangerous. Braking and handling could be affected, leading to loss of control and an accident.

CAUTION

A wrong-sized wheel may adversely affect:

Tire fit

Wheel and bearing life

Ground clearance

Snow-chain clearance

Speedometer calibration

Headlight aim

Bumper height

Tire Pressure Monitoring

System

(With Tire Pressure Monitoring

System)

When replacing/repairing the tires or wheels or both, have the work done by an Authorized

Mazda Dealer, or the tire pressure sensors may be damaged.

The wheels equipped on your

Mazda are specially designed for installation of the tire pressure sensors. Do not use non-genuine wheels, otherwise it may not be possible to install the tire pressure sensors.

NOTE

Be sure to install the tire pressure sensors whenever tires or wheels are replaced. Refer to

Tires and Wheels on page 5-27.

When replacing a wheel, make sure the new one is the same as the original factory wheel in diameter, rim width, and offset

(inset/outset).

Proper tire balancing provides the best riding comfort and helps reduce tread wear. Out-of-balance tires can cause vibration and uneven wear, such as cupping and flat spots.

8-31

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page278

Monday, June 18 2012 1:50 PM

Maintenance and Care

Owner Maintenance

Light Bulbs

Headlights

Front turn signal lights

Black plate (278,1)

Overhead light

Side turn signal lights

Parking lights/Front sidemarker lights

Fog lights

High-mount brake light

Brake lights/Taillights

(Rear side-marker lights)

License plate light

Reverse lights

8-32

Downloaded from

Form No.8CL7-EA-12H

Luggage compartment light

Rear turn signal lights

Some models.

Mazda2_8CL7-EA-12H_Edition1 Page279

Monday, June 18 2012 1:50 PM

Black plate (279,1)

Maintenance and Care

Owner Maintenance

WARNING

Never touch the glass portion of a halogen bulb with your bare hands and always wear eye protection when handling or working around the bulbs:

When a halogen bulb breaks, it is dangerous. These bulbs contain pressurized gas. If one is broken, it will explode and serious injuries could be caused by the flying glass.

If the glass portion is touched with bare hands, body oil could cause the bulb to overheat and explode when lit.

Always keep halogen bulbs out of the reach of children:

Playing with a halogen bulb is dangerous. Serious injuries could be caused by dropping a halogen bulb or breaking it some other way.

Replacing Exterior Light Bulbs

Headlight bulbs

1. Make sure the headlight switch is off.

2. If you are changing the right bulb, start the engine, turn the steering wheel all the way to the left, and turn off the engine. If you are changing the left bulb, turn the steering wheel to the right.

3. Turn the screws and the center section of the plastic retainers counterclockwise and remove them, then partially peel back the mudguard.

Removal

Installation

4. Detach the electrical connector from the sealing cover by pulling it to the rear.

8-33

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page280

Monday, June 18 2012 1:50 PM

Black plate (280,1)

Maintenance and Care

Owner Maintenance

5. Detach the sealing cover from the bulb.

Sealing cover

6. Unhook the bulb retaining spring.

7. Swing the retaining spring out and away to free the headlight bulb.

9. Replace the bulb.

10. Install the new bulb in the reverse order of removal.

NOTE l l l l

To replace the bulb, contact an Authorized

Mazda Dealer.

If the halogen bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used.

Use the protective cover and carton of the replacement bulb to dispose of the old bulb promptly out of the reach of children.

When reinstalling the sealing cover, make sure it fitted correctly.

Fog light bulbs

1. Make sure the ignition is switched off, and the headlight switch is off.

2. Turn the screw counterclockwise and remove it, then partially peel back the mudguard.

8. Carefully remove the headlight bulb from the socket by pulling it straight back.

8-34

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page281

Monday, June 18 2012 1:50 PM

3. Disconnect the electrical connector from the bulb by pressing the tab on the connector with your finger and pulling the connector.

Black plate (281,1)

Maintenance and Care

Owner Maintenance

Front turn signal lights

1. Make sure the ignition is switched off and the headlight switch is off.

2. Lift the hood.

3. Turn the socket and bulb assembly counterclockwise and remove it.

4. Remove the bulb by pushing it in slightly and turning it counterclockwise.

4. Turn the bulb assembly counterclockwise and remove it.

5. Install the new bulb in the reverse order of removal.

NOTE l l

To replace the bulb, contact an Authorized

Mazda Dealer.

If the halogen bulb is accidentally touched, l it should be cleaned with rubbing alcohol before being used.

Use the protective cover and carton of the replacement bulb to dispose of the old bulb promptly out of the reach of children.

5. Install the new bulb in the reverse order of removal.

Parking lights/Front side-marker lights

1. Make sure the headlight switch is off.

8-35

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page282

Monday, June 18 2012 1:50 PM

Black plate (282,1)

Maintenance and Care

Owner Maintenance

3. Turn the screws and the center section of the plastic retainers counterclockwise and remove them, then partially peel back the mudguard.

Removal

Side turn signal lights

1. Make sure the ignition is switched off and the headlight switch is off.

2. Slide the unit as shown in the figure to remove it.

Installation

4. Turn the socket and bulb assembly counterclockwise and remove it.

5. Disconnect the bulb from the socket.

3. Detach the electrical connector from the unit by pulling it outward.

6. Install the new bulb in the reverse order of removal.

4. Install the new side turn signal unit in the reverse order of removal.

NOTE

Bulb replacement is not possible because it is built into the unit. Replace the unit.

8-36

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page283

Monday, June 18 2012 1:50 PM

Black plate (283,1)

Brake lights/Taillights (Rear side marker lights)/Rear turn signal lights/

Reverse lights

1. Make sure the ignition is switched off and the headlight switch is off.

2. Turn the bolts counterclockwise and remove them.

Maintenance and Care

Owner Maintenance

Brake lights/Taillights (Rear side marker lights)

Rear turn signal lights

3. Pull the unit rearward to remove it.

Reverse lights

4. Turn the socket and bulb assembly counterclockwise and remove it.

5. Disconnect the bulb from the socket.

6. Install the new bulb in the reverse order of removal.

8-37

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page284

Monday, June 18 2012 1:50 PM

Black plate (284,1)

Maintenance and Care

Owner Maintenance

High-mount brake light

Due to the complexity and difficulty of the procedure, the LED bulbs must be replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible because it is built into the unit. Replace the unit.

License plate light

1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the flathead screwdriver.

2. Disconnect the bulb by pulling it out.

Replacing Interior Light Bulbs

Overhead light

1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the flathead screwdriver.

2. Disconnect the bulb by pulling it out.

Edge

3. Install the new bulb in the reverse order of the removal procedure.

Edge

3. Install the new bulb in the reverse order of removal.

8-38

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page285

Monday, June 18 2012 1:50 PM

Black plate (285,1)

Maintenance and Care

Owner Maintenance

Luggage compartment light

1. Wrap a small flathead screwdriver with a soft cloth to prevent damage to the lens and remove the lens by carefully prying on the edge of the lens with the flathead screwdriver.

2. Disconnect the bulb by pulling it out.

3. Install the new bulb in the reverse order of the removal procedure.

Fuses

Your vehicle's electrical system is protected by fuses.

If any lights, accessories, or controls don't work, inspect the appropriate circuit protector. If a fuse has blown, the inside element will be melted.

If the same fuse blows again, avoid using that system and consult an Authorized

Mazda Dealer as soon as possible.

Fuse Replacement

Replacing the fuses on the vehicle's left side

If the electrical system does not work, first inspect the fuses on the vehicle's left side.

1. Make sure the ignition is switched off, and other switches are off.

2. Remove the cover.

8-39

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page286

Monday, June 18 2012 1:50 PM

Black plate (286,1)

Maintenance and Care

Owner Maintenance

3. Pull the fuse straight out with the fuse puller provided on the inside of the engine compartment fuse block cover.

Fuse block (Engine compartment)

6. Reinstall the cover and make sure that it is securely installed.

Replacing the fuses under the hood

If the headlights or other electrical components do not work and the fuses in the cabin are normal, inspect the fuse block under the hood. If a fuse is blown, it must be replaced. Follow these steps:

1. Make sure the ignition is switched off, and other switches are off.

2. Remove the fuse block cover.

4. Inspect the fuse and replace it if it's blown.

Normal Blown

5. Insert a new fuse of the same amperage rating, and make sure it fits tightly. If it does not fit tightly, have an expert install it. We recommend an

Authorized Mazda Dealer.

If you have no spare fuses, borrow one of the same rating from a circuit not essential to vehicle operation, such as the MIRROR or CIGAR circuit.

CAUTION

Always replace a fuse with one of the same rating. Otherwise you may damage the electric system.

8-40

3. If any fuse but the MAIN fuse is blown, replace it with a new one of the same amperage rating

Normal

Blown

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page287

Monday, June 18 2012 1:50 PM

WARNING

Do not replace the main fuse by yourself. Have an Authorized Mazda

Dealer perform the replacement:

Replacing the fuse by yourself is dangerous because the MAIN fuse is a high current fuse. Incorrect replacement could cause an electrical shock or a short circuit resulting in a fire.

Main fuse

Black plate (287,1)

Maintenance and Care

Owner Maintenance

4. Reinstall the cover and make sure that it is securely installed.

8-41

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page288

Monday, June 18 2012 1:50 PM

Maintenance and Care

Owner Maintenance q

Fuse Panel Description

Fuse block (Engine compartment)

Black plate (288,1)

DESCRIPTION

FUEL HEAT

FUEL PUMP

F.FOG

P/W

HORN

EGI

DSC-P

DSC-V

MAG

TAIL

STOP

SWS

R.DEF

HAZARD

D/L

EOP

ENG BAR

8-42

Some models.

FUSE

RATING

―

15 A

PROTECTED COMPONENT

15 A

20 A

10 A

30 A

20 A

Fuel pump

Fog lights

Power windows

Horn

Engine control system

DSC

7.5 A Air conditioner

―

15 A

10 A

Taillights, Parking lights, License plate lights

Brake lights

7.5 A Air bag

20 A Rear window defroster

10 A

20 A

―

15 A

Hazard warning flashers, Turn signal lights

Power door locks

―

Engine control system

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page289

Monday, June 18 2012 1:50 PM

Black plate (289,1)

Maintenance and Care

Owner Maintenance

DESCRIPTION

ENG INJ

ENG INJ2

H/L HI RH

H/L HI LH

DCDC3

H/L LO RH

H/L LO LH

AUDIO2

DSC-V2

HORN2

METER

ROOM

GLOW

EVVT

IG KEY 1

FAN 3

FAN 2

FAN 1

INJ

IG KEY 2

ABS

DSC-P2

BLOWER

FUSE

RATING

40 A

―

30 A

―

15 A

―

15 A

―

30 A

―

15 A

―

15 A

―

PROTECTED COMPONENT

Engine control system

Headlight (RH)

Headlight (LH)

Overhead light

For protection of various circuits

―

Cooling fan

―

For protection of various circuits

―

30 A Air conditioner

8-43

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page290

Monday, June 18 2012 1:50 PM

Maintenance and Care

Owner Maintenance

Fuse block (Left side)

Black plate (290,1)

DESCRIPTION

TCM

ILLUMI

CIGAR

MIRROR

M.DEF

S.WARM

A/C

F.WIP

R.WIP

STARTER

METER 2

ENG

METER

SAS

AUDIO 3

P/W

FUSE

RATING

―

PROTECTED COMPONENT

7.5 A Dashboard illumination

―

15 A Accessory Socket

7.5 A Power control mirror

7.5 A Mirror defroster

― ―

7.5 A Air conditioner

20 A Front window wiper and washer

10 A

―

10 A

Rear window wiper and washer

―

Engine control system

Instrument cluster

Air bag 10 A

―

30 A Power windows

―

8-44

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page291

Monday, June 18 2012 1:50 PM

Black plate (291,1)

Maintenance and Care

Appearance Care

How to Minimize

Environmental Paint Damage

The paintwork on your Mazda represents the latest technical developments in composition and methods of application.

Environmental hazards, however, can harm the paint's protective properties, if proper care is not taken.

Here are some examples of possible damage, with tips on how to prevent them.

Etching Caused by Acid Rain or

Industrial Fallout

Occurrence

Industrial pollutants and vehicle emissions drift into the air and mix with rain or dew to form acids. These acids can settle on a vehicle's finish. As the water evaporates, the acid becomes concentrated and can damage the finish.

And the longer the acid remains on the surface, the greater the chance is for damage.

Prevention

It is necessary to wash and wax your vehicle to preserve its finish according to the instructions in this section. These steps should be taken immediately after you suspect that acid rain has settled on your vehicle's finish.

Damage Caused by Bird

Dropping, Insects, or Tree Sap

Occurrence

Bird droppings contain acids. If these aren't removed they can eat away the clear and color base coat of the vehicle's paintwork.

When insects stick to the paint surface and decompose, corrosive compounds form. These can erode the clear and color base coat of the vehicle's paintwork if they are not removed.

Tree sap will harden and adhere permanently to the paint finish. If you scratch the sap off while it is hard, some vehicle paint could come off with it.

Prevention

It is necessary to have your Mazda washed and waxed to preserve its finish according to the instructions in this section. This should be done as soon as possible.

Bird droppings can be removed with a soft sponge and water. If you are traveling and these are not available, a moistened tissue may also take care of the problem.

The cleaned area should be waxed according to the instructions in this section.

Insects and tree sap are best removed with a soft sponge and water or a commercially available chemical cleaner.

Another method is to cover the affected area with dampened newspaper for one to two hours. After removing the newspaper, rinse off the loosened debris with water.

8-45

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page292

Monday, June 18 2012 1:50 PM

Black plate (292,1)

Maintenance and Care

Appearance Care q

Water Marks

Occurrence

Rain, fog, dew, and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicle and evaporates, the minerals will concentrate and harden to form white rings. The rings can damage your vehicle's finish.

Prevention

It is necessary to wash and wax your vehicle to preserve its finish according to the instructions in this section. These steps should be taken immediately after you find water marks on your vehicle's finish.

Paint Chipping

Occurrence

Paint chipping occurs when gravel thrown in the air by another vehicle's tires hits your vehicle.

How to avoid paint chipping

Keeping a safe distance between you and the vehicle ahead reduces the chances of having your paint chipped by flying gravel.

NOTE l l l

The paint chipping zone varies with the speed of the vehicle. For example, when traveling at 90 km/h (56 mph), the paint chipping zone is 50 m (164 ft).

In low temperatures a vehicle's finish hardens. This increases the chance of paint chipping.

Chipped paint can lead to rust forming on your Mazda. Before this happens, repair the damage by using Mazda touch-up paint according to the instructions in this section.

Failure to repair the affected area could lead to serious rusting and expensive repairs.

8-46

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page293

Monday, June 18 2012 1:50 PM

Black plate (293,1)

Maintenance and Care

Appearance Care

Exterior Care

Follow all label and container directions when using a chemical cleaner or polish.

Read all warnings and cautions.

Maintaining the Finish

Washing

CAUTION

When the wiper lever is in the

AUTO position and the ignition is switched ON, the wipers may move automatically in the following cases:

If the windshield above the rain

Ø sensor is touched or wiped with a cloth.

If the windshield is struck with a hand or other object from either outside or inside the vehicle.

If you are going to clean the windshield, be sure the wipers are turned off completely

― this is particularly important when clearing ice and snow

― when it is most likely that the engine is left running.

Do not spray water in the engine compartment. Otherwise, it could result in engine-starting problems or damage to electrical parts.

To help protect the finish from rust and deterioration, wash your Mazda thoroughly and frequently, at least once a month, with lukewarm or cold water.

If the vehicle is washed improperly, the paint surface could be scratched. Here are some examples of how scratching could occur.

Scratches occur on the paint surface when: l

The vehicle is washed without first rinsing off dirt and other foreign matter.

l l l

The vehicle is washed with a rough, dry, or dirty cloth.

The vehicle is washed at a car wash that uses brushes that are dirty or too stiff.

Cleansers or wax containing abrasives are used.

NOTE l l

Mazda is not responsible for scratches caused by automatic car washes or improper washing.

Scratches are more noticeable on vehicles with darker paint finishes.

To minimize scratches on the vehicle's paint finish: l

Rinse off any dirt or other foreign matter using lukewarm or cold water l before washing.

Use plenty of lukewarm or cold water and a soft cloth when washing the l l l vehicle. Do not use a nylon cloth.

Rub gently when washing or drying the vehicle.

Take your vehicle only to a car wash that keeps its brushes well maintained.

Do not use abrasive cleansers or wax that contain abrasives.

8-47

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page294

Monday, June 18 2012 1:50 PM

Black plate (294,1)

Maintenance and Care

Appearance Care

CAUTION

Do not use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts. This may damage the protective coating; also, cleaners and detergents may discolor or deteriorate the paint.

To prevent damaging the antenna, remove it before entering a car wash facility or passing beneath a low overhead clearance.

Pay special attention to removing salt, dirt, mud, and other foreign material from the underside of the fenders, and make sure the drain holes in the lower edges of the doors and rocker panels are clean.

Insects, tar, tree sap, bird droppings, industrial fallout, and similar deposits can damage the finish if not removed immediately. When prompt washing with plain water is ineffective, use a mild soap made for use on vehicles.

Thoroughly rinse off all soap with lukewarm or cold water. Do not allow soap to dry on the finish.

After washing the vehicle, dry it with a clean chamois to prevent water spots from forming.

WARNING

Dry off brakes that have become wet by driving slowly, releasing the accelerator pedal and lightly applying the brakes several times until the brake performance returns to normal:

When using a high water pressure car wash

High water temperature and high water pressure car washers are available depending on the type of car wash machine. If the car washer nozzle is put too close to the vehicle, the force of the spray could damage or deform the molding, affect the sealability of parts, and allow water to penetrate the interior.

Keep a sufficient space (30 cm or more) between the nozzle and the vehicle. In addition, do not spend too much time spraying the same area of the vehicle, and be very careful when spraying between gaps in doors and around windows.

Waxing

Your vehicle needs to be waxed when water no longer beads on the finish.

Always wash and dry the vehicle before waxing it. In addition to the vehicle body, wax the metal trim to maintain its luster.

1. Use wax which contains no abrasives.

Waxes containing abrasive will remove paint and could damage bright metal parts.

8-48

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page295

Monday, June 18 2012 1:50 PM

Black plate (295,1)

Maintenance and Care

Appearance Care

2. Use a good grade of natural wax for metallic, mica, and solid colors.

3. When waxing, coat evenly with the sponge supplied or a soft cloth.

4. Wipe off the wax with a soft cloth.

NOTE

A spot remover to remove oil, tar, and similar materials will usually also take off the wax.

Rewax these areas even if the rest of the vehicle does not need it.

Repairing Damage to the Finish

Deep scratches or chips on the finish should be repaired promptly. Exposed metal quickly rusts and can lead to major repairs.

CAUTION

If your Mazda is damaged and needs metal parts repaired or replaced, make sure the body shop applies anti-corrosion materials to all parts, both repaired and new. This will prevent them from rusting.

Underbody Maintenance

Road chemicals and salt used for ice and snow removal and solvents used for dust control may collect on the underbody. If not removed, they will speed up rusting and deterioration of such underbody parts as fuel lines, frame, floor pan, and exhaust system, even though these parts may be coated with anti-corrosive material.

Thoroughly flush the underbody and wheel housings with lukewarm or cold water at the end of each winter. Try also to do this every month.

Pay special attention to these areas because they easily hide mud and dirt.

It will do more harm than good to wet down the road grime without removing it.

The lower edges of doors, rocker panels, and frame members have drain holes that should not be clogged. Water trapped there will cause rusting.

WARNING

Dry wet brakes by driving very slowly and applying the brakes lightly until brake performance is normal:

Aluminum Wheel Maintenance

A protective coating is provided over the aluminum wheels. Special care is needed to protect this coating.

CAUTION

Do not use any detergent other than mild detergent. Before using any detergent, verify the ingredients.

Otherwise, the product could discolor or stain the aluminum wheels.

Some models.

8-49

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page296

Monday, June 18 2012 1:50 PM

Black plate (296,1)

Maintenance and Care

Appearance Care

NOTE l l l

Do not use a wire brush or any abrasive cleaner, polishing compound, or solvent on aluminum wheels. They may damage the coating.

Always use a sponge or soft cloth to clean the wheels.

Rinse the wheels thoroughly with lukewarm or cold water. Also, be sure to clean the wheels after driving on dusty or salted roads to help prevent corrosion.

Avoid washing your vehicle in an automatic car wash that uses high-speed or hard l brushes.

If your aluminum wheels lose luster, wax the wheels.

(With Tire Pressure Monitoring System)

Check special requirements for Tire Pressure

Monitoring System.

Refer to Tires and Wheels on page 5-27.

Plastic Part Maintenance

l l

When cleaning the plastic lenses of the lights, do not use gasoline, kerosene, rectified spirit, paint, thinner, highly acidic detergents, or strongly alkaline detergents. Otherwise, these chemical agents can discolor or damage the surfaces resulting in a significant loss in functionality. If plastic parts become inadvertently exposed to any of these chemical agents, flush with water immediately.

If plastic parts such as the bumpers become inadvertently exposed to chemical agents or fluids such as gasoline, oil, engine coolant, or battery fluid, it could cause discoloration, staining, or paint peeling. Wipe off any such chemical agents or fluids using a soft cloth immediately.

l l l

High water temperature and high water pressure car washers are available depending on the type of high pressure car washer device. If the car washer nozzle is put too close to the vehicle or aimed at one area for an extended period of time, it could deform plastic parts or damage the paint.

Do not use wax containing compounds

(polish). Otherwise, it could result in paint damage.

In addition, do not use an electrical or air tool to apply wax. Otherwise, the frictional heat generated could result in deformation of plastic parts or paint damage.

8-50

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page297

Monday, June 18 2012 1:50 PM

Black plate (297,1)

Interior Care

WARNING

Do not spray water in the cabin:

Splashing water on electrical parts such as the audio unit and switches is dangerous as it could cause a malfunction or a fire.

Dashboard Precautions

Prevent caustic solutions such as perfume and cosmetic oils from contacting the dashboard. They'll damage and discolor the dashboard. If these solutions get on the dashboard, wipe them off immediately.

CAUTION

Do not use glazing agents.

Glazing agents contain ingredients which may cause discoloration, wrinkling, cracks and peeling.

Cleaning the Upholstery and

Interior Trim

Vinyl

Remove dust and loose dirt from vinyl with a whisk broom or vacuum cleaner.

Clean vinyl with a leather-and-vinyl cleaner.

Maintenance and Care

Appearance Care

Leather

Remove dust and sand first using a vacuum cleaner or other means, then wipe dirt off using a soft cloth with a leather cleaner or a soft cloth soaked in mild soap.

Wipe off the remaining cleaner or soap using a cloth soaked in clean water and wrung out well.

Remove moisture with a dry, soft cloth and allow the leather to further dry in a well-ventilated, shaded area. If the leather gets wet such as from rain, also remove moisture and dry it as soon as possible.

Some models.

8-51

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page298

Monday, June 18 2012 1:50 PM

Black plate (298,1)

Maintenance and Care

Appearance Care

NOTE l l l l

Because genuine leather is a natural material, its surface is not uniform and it may have natural scars, scratches, and wrinkles.

To maintain the quality for as long as possible, periodical maintenance, about twice a year, is recommended.

Sand and dust on the seat surface may damage the overcoat of the genuine leather surfaces and accelerate wear.

Greasy soiling on genuine leather may cause molding and stains.

l l l l l

Rubbing hard with a stiff brush or cloth may cause damage.

Do not wipe the leather using alcohol, chlorine bleach, or organic solvents such as thinner, benzene, or gasoline. Otherwise, it may cause discoloration or stains.

If the seats get wet, promptly remove moisture with a dry cloth. Remaining moisture on the surface may cause deterioration such as hardening and shrinkage.

Exposure to direct sunlight for long periods may cause deterioration and shrinkage.

When parking the car under direct sunlight for long periods, shade the interior using sunshades.

Do not leave vinyl products on the seats for long periods as they may affect the leather quality and coloring. If the cabin temperature becomes hot, the vinyl may deteriorate and adhere to the genuine leather.

Fabric

Remove dust and loose dirt from fabric with a whisk broom or vacuum cleaner.

Clean it with a mild soap solution good for upholstery and carpets. Remove fresh spots immediately with a fabric spot cleaner.

To keep the fabric looking clean and fresh, take care of it. Otherwise its color will be affected, it can be stained easily, and its fire-resistance may be reduced.

CAUTION

Use only recommended cleaners and procedures. Others may affect appearance and fire-resistance.

Piano black panel

The following parts are fitted with panels that have been treated with a special coating that resists scratching.

· Center panel

When the panel needs to be cleaned, use a soft cloth to wipe off dirt from the surface.

NOTE

Scratches or nicks on the panels resulting from the use of a hard brush or cloth may not be repairable.

Cleaning the Lap/Shoulder Belt

Webbing

Clean the webbing with a mild soap solution recommended for upholstery or carpets. Follow instructions. Don't bleach or dye the webbing; this may weaken it.

After cleaning the belts, thoroughly dry the belt webbing and make sure there is no remaining moisture before retracting them.

WARNING

Have an Authorized Mazda Dealer replace damaged seat belts immediately:

Using damaged seat belts is dangerous. In a collision, damaged belts cannot provide adequate protection.

8-52

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page299

Monday, June 18 2012 1:50 PM q

Cleaning the Window Interiors

If the windows become covered with an oily, greasy, or waxy film, clean them with glass cleaner. Follow the directions on the container.

CAUTION

Do not scrape or scratch the inside of the window glass. It could damage the thermal filaments.

When washing the inside of the window glass, use a soft cloth dampened in lukewarm water, gently wiping the thermal filaments.

Use of glass cleaning products could damage the thermal filaments.

Cleaning the Floor Mats

Rubber floor mats should be cleaned with mild soap and water only.

WARNING

Do not use rubber cleaners, such as tire cleaner or tire shine, when cleaning rubber floor mats:

Cleaning the rubber floor mats with rubber cleaning products makes the floor mats slippery.

This may cause an accident when depressing the accelerator, brake, or clutch (Manual transaxle) pedal or when getting in or out of the vehicle.

After removing the floor mats for cleaning, always reinstall them securely.Refer to Floor Mat on page 4-7.

Black plate (299,1)

Maintenance and Care

Appearance Care

8-53

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page300

Monday, June 18 2012 1:50 PM

Black plate (300,1)

8-54

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page301

Monday, June 18 2012 1:50 PM

Black plate (301,1)

Customer Information and Reporting

Safety Defects

Important consumer information including warranties and add-on equipment.

Customer Assistance ............................... 9-2

Customer Assistance (U.S.A.) ............ 9-2

Customer Assistance (Canada) ........... 9-7

Customer Assistance (Puerto Rico) ... 9-10

Mazda Importer/Distributors ............... 9-11

Importer/Distributor .......................... 9-11

Distributor in Each Area ................... 9-11

Warranty ................................................ 9-12

Warranties for Your Mazda ............... 9-12

Outside the United States and

Canada .............................................. 9-13

Outside the United States .................. 9-14

Outside Canada ................................. 9-15

Registering Your Vehicle in A Foreign

Country (Except United States and

Canada) ............................................. 9-16

Add-On Non-Genuine Parts and

Accessories ....................................... 9-17

Cell Phones ............................................. 9-18

Cell Phones Warning ......................... 9-18

Event Data Recorder ............................. 9-19

Event Data Recorder ......................... 9-19

Uniform Tire Quality Grading System

(UTQGS) ................................................ 9-20

Uniform Tire Quality Grading System

(UTQGS) .......................................... 9-20

Tire Information (except Canada) ....... 9-22

Tire Labeling ..................................... 9-22

Location of the Tire Label

(Placard) ............................................ 9-28

Tire Maintenance .............................. 9-31

Vehicle Loading ................................ 9-34

Steps for Determining the Correct Load

Limit ................................................. 9-40

Reporting Safety Defects ....................... 9-41

Reporting Safety Defects (U.S.A.) .... 9-41

Reporting Safety Defects (Canada) ... 9-42

Service Publications .............................. 9-43

Service Publications .......................... 9-43

9-1

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page302

Monday, June 18 2012 1:50 PM

Black plate (302,1)

Customer Information and Reporting Safety Defects

Customer Assistance

Customer Assistance (U.S.A.)

Your complete and permanent satisfaction is our business. We are here to serve you. All

Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.

If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take the following steps:

NOTE

STEP 1: Contact Your Mazda Dealer

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue.

If your concern has not been resolved by the CUSTOMER RELATIONS, SALES,

SERVICE, or PARTS MANAGER, then please contact the GENERAL MANAGER of l the dealership or the OWNER.

STEP 2: Contact Mazda North American Operations

If for any reason you feel the need for further assistance after contacting your dealership management or it becomes necessary to have the components or wiring system for the supplementary restraint system modified to accommodate a person with certain medical conditions in accordance with a certified physician, you can reach Mazda North American

Operations by one of the following ways.

Log on: at www.mazdaUSA.com

Answers to many questions, including how to locate or contact a local Mazda dealership in the U.S., can be found here.

E-mail: click on

“

” located on the

“

Inside Mazda

” tab, or at the bottom of the page at www.mazdaUSA.com

By phone at: 1 (800) 222-5500

9-2

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page303

Monday, June 18 2012 1:50 PM

Black plate (303,1)

Customer Information and Reporting Safety Defects

Customer Assistance

By letter at:

Attn: Customer Assistance

Mazda North American Operations

7755 Irvine Center Drive

Irvine, CA 92618-2922

P.O. Box 19734

Irvine, CA 92623-9734

In order to serve you efficiently and effectively, please help us by providing the following information:

1. Your name, address, and telephone number

2. Year and model of vehicle

3. Vehicle Identification Number (17 digits, noted on your registration or title or located on the upper driver's side corner of the dash)

4. Purchase date and current mileage

5. Your dealer's name and location

6. Your question(s)

If you live outside the U.S.A., please contact your nearest Mazda Distributor.

STEP 3: Contact Better Business Bureau (BBB)

Mazda North American Operations realizes that mutual agreement on some issues may not be possible. As a final step to ensure that your concerns are being fairly considered, Mazda

North American Operations has agreed to participate in a dispute settlement program administered by the Better Business Bureau (BBB) system, at no cost to you the consumer.

BBB AUTO LINE works with consumers and the manufacturer in an attempt to reach a mutually acceptable resolution of any warranty related concerns. If the BBB is not able to facilitate a settlement they will provide an informal hearing before an arbitrator.

You are required to resort to BBB AUTO LINE before exercising rights or seeking remedies under the Federal Magnuson-Moss Warranty Act, 15 U.S.C. § 2301 et seq. To the extent permitted by the applicable state

“

Lemon Law

”

, you are also required to resort to

BBB AUTO LINE before exercising any rights or seeking remedies under the

“

Lemon

Law

”

. If you choose to seek remedies that are not created by the Magnuson-Moss Warranty

Act or the applicable state

“

Lemon Law

”

, you are not required to first use BBB AUTO

LINE.

9-3

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page304

Monday, June 18 2012 1:50 PM

Black plate (304,1)

Customer Information and Reporting Safety Defects

Customer Assistance

The whole process normally takes 40 days or less. The arbitration decision is not binding on you or Mazda unless you accept the decision. For more information about BBB AUTO

LINE, including current eligibility standards, please call 1-800-955-5100 or visit the BBB website at www.lemonlaw.bbb.org.

Being truly committed to customer satisfaction is more than a phrase with Mazda. We hope to satisfy every customer directly, but if there is ever a question about our decision, Mazda believes in providing a fast, fair and free method such as the BBB AUTO LINE to ensure

Mazda delivers on our commitment to do the right thing for our customers!

California Customers

1. Mazda North American Operations participates in BBB AUTO LINE, a mediation/ arbitration program administered by the Council of Better Business Bureaus [4200

Wilson Boulevard, Arlington, Virginia 22203] through local Better Business Bureaus.

BBB AUTO LINE and Mazda have been certified by the Arbitration Certification

Program of the California Department of Consumer Affairs.

2. If you have a problem arising under a Mazda written warranty, we encourage you to bring it to our attention. If we are unable to resolve it, you may file a claim with BBB

AUTO LINE. Claims must be filed with BBB AUTO LINE within six (6) months after the expiration of the warranty.

3. To file a claim with BBB AUTO LINE, call 1-800-955-5100. There is no charge for the call.

4. In order to file a claim with BBB AUTO LINE, you will have to provide your name and address, the brand name and vehicle identification number (VIN) of your vehicle, and a statement of the nature of your problem or complaint. You will also be asked to provide: the approximate date of your acquisition of the vehicle, the vehicle's current mileage, the approximate date and mileage at the time any problem(s) were first brought to the attention of Mazda or one of our dealers, and a statement of the relief you are seeking.

5. BBB AUTO LINE staff may try to help resolve your dispute through mediation. If mediation is not successful, or if you do not wish to participate in mediation, claims within the program's jurisdiction may be presented to an arbitrator at an informal hearing. The arbitrator's decision should ordinarily be issued within 40 days from the time your complaint is filed; there may be a delay of 7 days if you did not first contact

Mazda about your problem, or a delay of up to 30 days if the arbitrator requests an inspection/report by an impartial technical expert or further investigation and report by

BBB AUTO LINE.

9-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page305

Monday, June 18 2012 1:50 PM

Black plate (305,1)

Customer Information and Reporting Safety Defects

Customer Assistance

6. You are required to use BBB AUTO LINE before asserting in court any rights or remedies conferred by California Civil Code Section 1793.22. You are also required to use BBB AUTO LINE before exercising rights or seeking remedies created by Title I of the Magnuson-Moss Warranty Act, 15 U.S.C. sec. 2301 et seq. If you choose to seek redress by pursuing rights and remedies not created by California Civil Code Section

1793.22 or Title I of the Magnuson-Moss Warranty Act, resort to BBB AUTO LINE is not required by those statutes.

7. California Civil Code Section 1793.2 (d) requires that, if Mazda or its representative is unable to repair a new motor vehicle to conform to the vehicle's applicable express warranty after a reasonable number of attempts, Mazda may be required to replace or repurchase the vehicle. California Civil Code Section 1793.22 (b) creates a presumption that Mazda has had a reasonable number of attempts to conform the vehicle to its applicable express warranties if, within 18 months from delivery to the buyer or 18,000 miles on the vehicle's odometer, whichever occurs first, one or more of the following occurs: l

The same nonconformity [a failure to conform to the written warranty that l substantially impairs the use, value or safety of the vehicle] results in a condition that is likely to cause death or serious bodily injury if the vehicle is driven

AND the nonconformity has been subject to repair two or more times by Mazda or its agents

AND the buyer or lessee has directly notified Mazda of the need for the repair of the nonconformity; OR

The same nonconformity has been subject to repair 4 or more times by Mazda or its agents

AND the buyer has notified Mazda of the need for the repair of the nonconformity; OR l

The vehicle is out of service by reason of repair of nonconformities by Mazda or its agents for a cumulative total of more than 30 calendar days after delivery of the vehicle to the buyer.

NOTICE TO Mazda AS REQUIRED ABOVE SHALL BE SENT TO THE

FOLLOWING ADDRESS:

Mazda North American Operations

7755 Irvine Center Drive

Irvine, CA 92618

ATTN: Customer Mediation

8. The following remedies may be sought in BBB AUTO LINE: repairs, reimbursement for money paid to repair a vehicle or other expenses incurred as result of a vehicle nonconformity, repurchase or replacement of your vehicle, and compensation for damages and remedies available under Mazda's written warranty or applicable law.

9. The following remedies may not be sought in BBB AUTO LINE: punitive or multiple damages, attorneys' fees, or consequential damages other than as provided in California

Civil Code Section 1794 (a) and (b).

9-5

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page306

Monday, June 18 2012 1:50 PM

Black plate (306,1)

Customer Information and Reporting Safety Defects

Customer Assistance

10. You may reject the decision issued by a BBB AUTO LINE arbitrator. If you reject the decision, you will be free to pursue further legal action. The arbitrator's decision and any findings will be admissible in a court action.

11. If you accept the arbitrator's decision, Mazda will be bound by the decision, and will comply with the decision within a reasonable time not to exceed 30 days after we receive notice of your acceptance of the decision.

12. Please call BBB AUTO LINE at 1-800-955-5100 for further details about the program.

9-6

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page307

Monday, June 18 2012 1:50 PM

Black plate (307,1)

Customer Information and Reporting Safety Defects

Customer Assistance

Customer Assistance (Canada)

Satisfaction Review Process

Your complete and permanent satisfaction is of primary concern to Mazda. All Authorized

Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition. In our experience, any questions, problems, or complaints regarding the operation of your

Mazda or any other general service transactions are most effectively resolved by your dealer. If the cause of your dissatisfaction cannot adequately be addressed by normal dealership procedures, we recommend that you take the following steps: q

STEP 1: Contact the Mazda Dealer

Discuss the matter with a member of dealership management. If the Service Manager has already reviewed your concerns, contact the owner of the dealership or its General

Manager.

STEP 2: Contact the Mazda Regional Office

If you feel that you still require assistance, ask the dealer Service Manager to arrange for you to meet the local Mazda Service Representative. If more expedient, contact Mazda

Canada Inc.Regional Office nearest you for such arrangements. Regional Office address and phone numbers are shown (page 9-9).

STEP 3: Contact the Mazda Customer Relations Department

If still not substantially satisfied, contact the Customer Relations Department, Mazda

Canada Inc., 55 Vogell Road, Richmond Hill, Ontario, L4B 3K5 Canada TEL: 1 (800)

263-4680.

Provide the Department with the following information:

1. Your name, address and telephone number

2. Year and model of vehicle

3. Vehicle Identification Number (VIN). Refer to the

“

Vehicle Identification Labels

” page of section 10 of this manual for the location of the VIN.

4. Purchase date

5. Present odometer reading

6. Your dealer's name and location

7. The nature of your problem and/or cause of dissatisfaction

The Department, in cooperation with the local Mazda Service Representative, will review the case to determine if everything possible has been done to ensure your satisfaction.

9-7

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page308

Monday, June 18 2012 1:50 PM

Black plate (308,1)

Customer Information and Reporting Safety Defects

Customer Assistance

Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealer's service facilities, personnel and equipment. We urge you to follow the above three steps in sequence for most effective results.

Mediation/Arbitration Program

Occasionally a customer concern cannot be resolved through Mazda's Customer

Satisfaction Program. If after exhausting the procedures in this manual your concern is still not resolved, you have another option.

Mazda Canada Inc. participates in an arbitration program administered by the

Canadian Motor Vehicle Arbitration Plan (CAMVAP). CAMVAP will advise you about how your concern may be reviewed and resolved by an independent third party through binding arbitration.

Your complete satisfaction is the goal of Mazda Canada Inc. and our dealers.

Mazda's participation in CAMVAP makes a valuable contribution to our achieving that goal. There is no charge for using CAMVAP. CAMVAP results are fast, fair and final as the award is binding on both you and Mazda Canada Inc.

Canadian Motor Vehicle Arbitration Plan (CAMVAP)

If a specific item of concern arises, where a solution cannot be reached between an owner,

Mazda, and/or one of its dealers (that all parties cannot agree upon), the owner may wish to use the services offered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).

CAMVAP uses the services of Provincial Administrators to assist consumers in scheduling and preparing for their arbitration hearings. However, before you can proceed with

CAMVAP you must follow your Mazda dispute resolution process as outlined previously.

9-8

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page309

Monday, June 18 2012 1:50 PM

Black plate (309,1)

Customer Information and Reporting Safety Defects

Customer Assistance

CAMVAP is fully implemented in all provinces and territories.

Consumers wishing to obtain further information about the Program should contact the

Provincial Administrator at 1 (800) 207-0685, or by contacting the

Canadian Motor Vehicle Arbitration Plan Office at:

Canadian Motor Vehicle Arbitration Plan

235 Yorkland Boulevard, suite 300

North York, Ontario

M2J 4Y8 http://camvap.ca

Provincial Administrators may be reached locally as listed below:

Province/Territory

British Columbia & Yukon Territories

Alberta & Northwest Territories

Saskatchewan

Manitoba

Ontario

Atlantic Canada

Quebec q

Regional Offices

REGIONAL OFFICES

MAZDA CANADA INC.

WESTERN REGION

8171 ACKROYD ROAD

SUITE 2000

RICHMOND B.C.

V6X 3K1

(604) 303-5670

MAZDA CANADA INC.

CENTRAL/ATLANTIC REGION

55 VOGELL ROAD,

RICHMOND HILL,

ONTARIO, L4B 3K5

(905) 787-7000

MAZDA CANADA INC.

QUEBEC REGION

6111 ROUTE TRANS

CANADIENNE

POINTE CLAIRE, QUEBEC

H9R 5A5

(514) 694-6390

CAMVAP Number

1 (800) 207-0685

AREAS COVERED

ALBERTA,

BRITISH COLUMBIA,

MANITOBA,

SASKATCHEWAN,

YUKON

ONTARIO

QUEBEC,

NEW BRUNSWICK,

NOVA SCOTIA,

PRINCE EDWARD ISLAND,

NEWFOUNDLAND

9-9

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page310

Monday, June 18 2012 1:50 PM

Black plate (310,1)

Customer Information and Reporting Safety Defects

Customer Assistance

Customer Assistance (Puerto Rico)

Your complete and permanent satisfaction is our business. That is why all Authorized

Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.

If you have any questions or recommendations for improvement regarding the service of your Mazda vehicle or servicing by Mazda Dealer personnel, we recommend that you take the following steps: q

STEP 1

Discuss the matter with an Authorized Mazda Dealer. This is the quickest and best way to address the issue. If your concern has not been resolved by the CUSTOMER RELATIONS,

SALES, SERVICE, or PARTS MANAGER, then please contact the GENERAL

MANAGER of the dealership or the OWNER.

STEP 2

If, after following STEP 1, you feel the need for further assistance, please contact your area's Mazda representative (Indicated on the next page).

Please help us by providing the following information:

1. Your name, address, and telephone number

2. Year and model of vehicle

3. Vehicle Identification Number (17 digits, noted on your registration or title or located on the upper driver's side corner of the dash)

4. Purchase date and current mileage

5. Your dealer's name and location

6. Your question(s)

9-10

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page311

Monday, June 18 2012 1:50 PM

Importer/Distributor

U.S.A.

Mazda North American Operations

7755 Irvine Center Drive

Irvine, CA 92618-2922 U.S.A.

P.O. Box 19734

Irvine, CA 92623-9734 U.S.A.

TEL: 1 (800) 222-5500 (in U.S.A.)

(949) 727-1990 (outside U.S.A.)

Black plate (311,1)

Customer Information and Reporting Safety Defects

Mazda Importer/Distributors

Distributor in Each Area

CANADA

Mazda Canada Inc.

55 Vogell Road, Richmond Hill,

Ontario, L4B 3K5 Canada

TEL: 1 (800) 263-4680 (in Canada)

(905) 787-7000 (outside Canada) q

PUERTO RICO/U.S. Virgin Island

Plaza Motors Corp. (Mazda de Puerto

Rico)

P.O. Box 362722, San Juan, Puerto Rico

00936-2722

TEL: (787) 641-9300 q

GUAM

Triple J Motors

157 South Marine Drive, Tamuning,

GUAM 96911 USA

P.O. Box 6066 Tamuning, Guam 96931

TEL: (671) 649-6555 q

SAIPAN

Pacific International Marianas, Inc.

(d.b.a. Midway Motors)

P.O. Box 887 Saipan, MP 96950

TEL: (670) 234-7524

Triple J Saipan, Inc.

(d.b.a. Triple J Motors)

P.O. Box 500487 Saipan, MP 96950-0487

TEL: (670) 234-7133/3051

9-11

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page312

Monday, June 18 2012 1:50 PM

Black plate (312,1)

Customer Information and Reporting Safety Defects

Warranty

Warranties for Your Mazda

l l l l l l l l

New Vehicle Limited Warranty

Powertrain Limited Warranty

Safety Restraint System Limited Warranty

Anti-perforation Limited Warranty

Federal Emission Control Warranty/California Emission Control Warranty l l

Emission Defect Warranty

Emission Performance Warranty

Emission Control Warranty

Replacement Parts and Accessories Limited Warranty

Tire Warranty

NOTE

Warranty information varies depending on the country. Refer to the Warranty Booklet for detailed warranty information.

9-12

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page313

Monday, June 18 2012 1:50 PM

Black plate (313,1)

Customer Information and Reporting Safety Defects

Warranty

Outside the United States and Canada

Government regulations in the United States and Canada require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the

United States, its territories, and Canada may differ from those sold in other countries.

The differences may make it difficult or even impossible for your vehicle to receive satisfactory servicing in other countries. We strongly recommend that you NOT take your

Mazda outside these areas.

You may have these problems if you do: l l

Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will affect vehicle performance and damage the emission controls and engine.

Proper repair facilities, tools, testing equipment, and replacement parts may not be available.

The Mazda warranty applies only to Mazda vehicles registered and normally operated in the United States, its territories, and Canada.

Downloaded from

Form No.8CL7-EA-12H

9-13

Mazda2_8CL7-EA-12H_Edition1 Page314

Monday, June 18 2012 1:50 PM

Black plate (314,1)

Customer Information and Reporting Safety Defects

Warranty

Outside the United States

Government regulations in the United States require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the United

States may differ from those sold in other countries.

The differences may make it difficult or even impossible for your vehicle to receive satisfactory servicing in other countries. We strongly recommend that you NOT take your

Mazda outside the United States. However, in the event that you are moving to Canada permanently, Mazda vehicles built for use in the United States could be eligible for exportation to Canada with specific vehicle modifications to comply with the Canadian

Motor Vehicle Safety Standards (CMVSS).

NOTE

The above is applicable for a permanent import/export situation and not related to travelers on vacation.

You may have the following problems if you do take your vehicle outside of the United

States: l

Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will affect vehicle performance and damage the emission controls and engine.

Proper repair facilities, tools, testing equipment, and replacement parts may not be available.

Please refer to your Manufacturer's Warranty Booklet for more information.

9-14

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page315

Monday, June 18 2012 1:50 PM

Black plate (315,1)

Customer Information and Reporting Safety Defects

Warranty

Outside Canada

Government regulations in Canada require that automobiles meet specific emission regulations and safety regulations. Therefore, vehicles built for use in Canada may differ from those sold in other countries.

The differences may make it difficult or even impossible for your vehicle to receive satisfactory servicing in other countries. We strongly recommend that you NOT take your

Mazda outside Canada. However, in the event that you are moving to the United States permanently, Mazda vehicles built for use in Canada could be eligible for exportation to the

United States with specific vehicle modifications to comply with the United States Federal

Motor Vehicle Safety Standards (FMVSS).

NOTE

The above is applicable for a permanent import/export situation and not related to travelers on vacation.

You may have the following problems if you do take your vehicle outside of Canada: l

Recommended fuel may be unavailable. Any kind of leaded fuel or low-octane fuel will l affect vehicle performance and damage the emission controls and engine.

Proper repair facilities, tools, testing equipment, and replacement parts may not be available.

Please refer to your Manufacturer's Warranty Booklet for more information.

Downloaded from

Form No.8CL7-EA-12H

9-15

Mazda2_8CL7-EA-12H_Edition1 Page316

Monday, June 18 2012 1:50 PM

Black plate (316,1)

Customer Information and Reporting Safety Defects

Warranty

Registering Your Vehicle in A Foreign Country (Except

United States and Canada)

Registering your vehicle in a foreign country may be problematic depending on whether it meets the specific emission and safety standards of the country in which the vehicle will be driven. Consequently, your vehicle may require modifications at personal expense in order to meet the regulations.

In addition, you should be aware of the following issues:

Satisfactory vehicle servicing may be difficult or impossible in another country.

The fuel specified for your vehicle may be unavailable.

Parts, servicing techniques, and tools necessary to maintain and repair your vehicle may be unavailable.

There might not be an Authorized Mazda Dealer in the country you plan to take your vehicle.

The Mazda warranty is valid only in certain countries.

9-16

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page317

Monday, June 18 2012 1:50 PM

Black plate (317,1)

Customer Information and Reporting Safety Defects

Warranty

Add-On Non-Genuine Parts and Accessories

Non-genuine parts and accessories for Mazda vehicles can be found in stores.

These may fit your vehicle, but they are not approved by Mazda for use with Mazda vehicles. When you install non-genuine parts or accessories, they could affect your vehicle's performance or safety systems; the Mazda warranty doesn't cover this. Before you install any non-genuine parts or accessories, consult an Authorized Mazda Dealer.

WARNING

Always consult an Authorized Mazda Dealer before you install non-genuine parts or accessories:

Installation of non-genuine parts or accessories is dangerous. Improperly designed parts or accessories could seriously affect your vehicle's performance or safety systems. This could cause you to have an accident or increase your chances of injuries in an accident.

Be very careful in choosing and installing add-on electrical equipment, such as mobile telephones, two-way radios, stereo systems, and car alarm systems:

Incorrectly choosing or installing improper add-on equipment or choosing an improper installer is dangerous. Essential systems could be damaged, causing engine stalling, air-bag (SRS) activation, ABS/TCS/DSC inactivation, or a fire in the vehicle.

Mazda assumes no responsibility for death, injury, or expenses that may result from the installation of add-on non-genuine parts or accessories.

9-17

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page318

Monday, June 18 2012 1:50 PM

Black plate (318,1)

Customer Information and Reporting Safety Defects

Cell Phones

Cell Phones Warning

WARNING

Please comply with the legal regulations concerning the use of communication equipment in vehicles in your State or Province:

Use of any electrical devices such as cell phones, computers, portable radios, vehicle navigation or other devices by the driver while the vehicle is moving is dangerous.

Dialing a number on a cell phone while driving also ties-up the driver's hands. Use of these devices will cause the driver to be distracted and could lead to a serious accident. If a passenger is unable to use the device, pull off the right-of-way to a safe area before use. If use of a cell phone is necessary despite this warning, use a handsfree system to at least leave the hands free to drive the vehicle. Never use a cell phone or other electrical devices while the vehicle is moving and, instead, concentrate on the full-time job of driving.

9-18

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page319

Monday, June 18 2012 1:50 PM

Black plate (319,1)

Customer Information and Reporting Safety Defects

Event Data Recorder

This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: l

How various systems in your vehicle were operating; l l

Whether or not the driver and passenger safety belts were buckled/fastened;

How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, l

How fast the vehicle was traveling.

These data can help provide a better understanding of the circumstances in which crashes and injuries occur.

NOTE

EDR data are recorded by your vehicle only if a non-trivial crash or near crash-like situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.

To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR.

Mazda will not disclose any of the data recorded in an EDR to a third party unless: l

A written agreement from the vehicle owner or the lessee is obtained l l

Officially requested by the police or other law enforcement authorities

Used as a defense for Mazda in a law suit, claim, or arbitration l

Ordered by a judge or court

However, if necessary Mazda will: l l

Use the data for research on Mazda vehicle performance, including safety.

Disclose the data or the summarized data to a third party for research purposes without disclosing vehicle or owner identification information.

9-19

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page320

Monday, June 18 2012 1:50 PM

Black plate (320,1)

Customer Information and Reporting Safety Defects

Uniform Tire Quality Grading System (UTQGS)

This information relates to the tire grading system developed by the U.S. National

Highway Traffic Safety Administration for grading tires by tread wear, traction, and temperature performance.

Tread Wear

The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course.

For example, a tire graded 150 would wear one-and-a-half times as well on the government course as a tire graded 100.

The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm because of variations in driving habits, service practices and differences in road characteristics and climate.

Traction-AA, A, B, C

The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.

WARNING

The traction grade assigned to this tire is based on braking (straight ahead) traction tests and does not include acceleration cornering (turning), hydroplaning, or peak traction characteristics.

Temperature-A, B, C

The temperature grades A (the highest), B, and C, represent the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.

Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperatures can lead to sudden tire failure.

Grade C corresponds to a level of performance which all passenger vehicle tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.

9-20

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page321

Monday, June 18 2012 1:50 PM

Black plate (321,1)

Customer Information and Reporting Safety Defects

Uniform Tire Quality Grading System (UTQGS)

WARNING

Keep your vehicle's tires properly inflated and not overloaded:

Driving with improperly inflated or overloaded tires is dangerous. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. The temperature grade for this tire is established for a tire that is properly inflated and not overloaded.

These grades will be added to the sidewalls of passenger vehicle tires over the next several years according to a schedule established by the NHTSA and the tire manufacturers.

The grade of tires available as standard or optional equipment on Mazda vehicles may vary with respect to grade.

ALL PASSENGER VEHICLE TIRES MUST CONFORM TO THESE GRADES AND

TO ALL OTHER FEDERAL TIRE-SAFETY REQUIREMENTS.

UNIFORM TIRE QUALITY GRADING

Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.

For example:

TREADWEAR 200 TRACTION AA TEMPERATURE A

UTQGS MARK (example)

TREADWEAR 200 TRACTION AA

TEMPERATURE A

9-21

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page322

Monday, June 18 2012 1:50 PM

Black plate (322,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

Tire Labeling

Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a tire identification number for safety standard certification and in case of a recall.

Information on Passenger Vehicle Tires

Please refer to the sample below.

1. TIN: U.S. DOT tire identification number

2. Passenger car tire

3. Nominal width of tire in millimeters

4. Ratio of height to width (aspect ratio)

5. Radial

6. Run-flat tire

7. Rim diameter code

8. Load index & speed symbol

9. Severe snow conditions

10. Tire ply composition and materials used

9-22

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page323

Monday, June 18 2012 1:50 PM

Black plate (323,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

11. Max. load rating

12. Tread wear, traction and temperature grades

13. Max. permissible inflation pressure

14. SAFETY WARNING

P215/65R15 95H is an example of a tire size and load index rating. Here is an explanation of the various components of that tire size and load index rating. Note that the tire size and load index rating may be different from the example.

Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated by the Tire and Rim Association (T&RA).

NOTE

If your tire size does not begin with a letter this may mean it is designated by either ETRTO

(European Tire and Rim Technical Organization) or JATMA (Japan Tire Manufacturing Association).

215

“

215

” is the nominal width of the tire in millimeters. This three-digit number gives the width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger the number, the wider the tire.

“

” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.

“

” is the tire construction symbol. R indicates

“

Radial ply construction

”

“

” is the wheel rim diameter in inches.

“

” is the Load Index. This two-or three-digit number indicates how much weight each tire can support.

9-23

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page324

Monday, June 18 2012 1:50 PM

Black plate (324,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

“

” is the speed rating. The speed rating denotes the maximum speed for which the use of the tire is rated.

Letter Rating

Speed Rating

99 mph

106 mph

112 mph

118 mph

124 mph

130 mph

149 mph

168

* mph

186

* mph

* For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. For tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.

M S or M/S: Mud and Snow

AT: All Terrain.

AS: All Season. The

“

M S

” or

“

M/S

” indicates that the tire has some functional use in mud and snow.

U.S. DOT Tire Identification Number (TIN)

This begins with the letters

“

DOT

” which indicates the tire meets all federal standards. The next two numbers or letters are the plant code where it was manufactured, and the last four numbers represent the week and year the tire was manufactured. For example, the numbers

457 means the 45st week of 1997. After 2000 the numbers go to four digits. For example, the number 2102 means the 21th week of 2002. The other numbers are marketing codes used at the manufacturer's discretion. This information is used to contact consumers if a tire defect requires a recall.

Tire Ply Composition and Materials Used

The number of plies indicates the number of layers of rubber-coated fabric in the tire. In general, the greater the number of plies, the more weight a tire can support. Tire manufacturers also must indicate the tire materials, which include steel, nylon, polyester, and other.

Maximum Load Rating

This number indicates the maximum load in kilograms and pounds that can be carried by the tire.

Maximum Permissible Inflation Pressure

This number is the greatest amount of air pressure that should ever be put in the tire under normal driving conditions.

9-24

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page325

Monday, June 18 2012 1:50 PM

Black plate (325,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

Tread Wear, Traction and Temperature Grades

Tread wear:

The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100.

Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.

Temperature:

The temperature grades are A (the highest), B and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.

Snow Tires

In some heavy snow areas, local governments may require true snow tires, those with very deeply cut tread. These tires should only be used in pairs or placed on all four wheels.

Make sure you purchase snow tires that are the same size and construction type as the other tires on your vehicle.

SAFETY WARNING

The following safety warning appears on the tire's sidewall.

SERIOUS INJURY MAY RESULT FROM: l l

EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER MOUNTING-

MATCH TIRE DIAMETER TO RIM DIAMETER; NEVER EXCEED 40 psi (275 kPa)

TO SEAT BEADS-ONLY SPECIALLY TRAINED PERSONS SHOULD MOUNT

TIRES.

TIRE FAILURE DUE TO UNDER-INFLATION/OVERLOADING/DAMAGE-

FOLLOW OWNER'S MANUAL AND PLACARD IN VEHICLE-FREQUENTLY

CHECK INFLATION PRESSURE AND INSPECT FOR DAMAGE.

9-25

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page326

Monday, June 18 2012 1:50 PM

Customer Information and Reporting Safety Defects

Tire Information (except Canada) q

Information on Temporary Tires

Please refer to the sample below.

Black plate (326,1)

1. Temporary tires

2. Nominal width of tire in millimeters

3. Ratio of height to width (aspect ratio)

4. Diagonal

5. Rim diameter code

6. Load index & speed symbol

T115/70D 16 90M is an example of a tire size and load index rating. Here is an explanation of the various components of that tire size and load index rating. Note that the tire size and load index rating may be different from the example.

Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated by the Tire and Rim Association (T&RA).

115

“

115

9-26

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page327

Monday, June 18 2012 1:50 PM

Black plate (327,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

“

” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.

“

” is the tire construction symbol. D indicates

“ diagonal ply construction

”

“

” is the wheel rim diameter in inches.

“

” is the Load Index. This two-or three-digit number indicates how much weight each tire can support.

“

” is the speed rating. The speed rating denotes the maximum speed for which the use of the tire is rated.

Letter Rating

Speed Rating

81 mph

Downloaded from

Form No.8CL7-EA-12H

9-27

Mazda2_8CL7-EA-12H_Edition1 Page328

Monday, June 18 2012 1:50 PM

Black plate (328,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

Location of the Tire Label (Placard)

You will find the tire label containing tire inflation pressure by tire size and other important information on the driver's side B-pillar or on the edge of the driver's door frame.

SAMPLE q

Recommended Tire Inflation Pressure

On the tire label you will find the recommended tire inflation pressure in both kPa and psi for the tires installed as original equipment on the vehicle. It is very important that the inflation pressure of the tires on your vehicle is maintained at the recommended pressure.

You should check the tire pressure regularly to insure that the proper inflation pressure is maintained.

Refer to Tires on page 10-6.

NOTE

Tire pressures listed on the vehicle placard or tire information label indicate the recommended cold tire inflation pressure, measured when the tires are cold, after the vehicle has been parked for at least

3 hours. As you drive, the temperature in the tire warms up, increasing the tire pressure.

9-28

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page329

Monday, June 18 2012 1:50 PM

Black plate (329,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

WARNING

Always check the tire inflation pressures on a regular basis according to the recommended tire inflation pressure on the tire label and in conjunction with the information in this owner's manual:

Driving your vehicle with under-inflated tires is dangerous.

Under-inflation is the most common cause of failures in any kind of tire and may result in severe cracking, tread separation or

“ blowout

”

, with unexpected loss of vehicle control and increased risk of injury. Under-inflation increases sidewall flexing and rolling resistance, resulting in heat buildup and internal damage to the tire. It results in unnecessary tire stress, irregular wear, loss of control and accidents. A tire can lose up to half of its air pressure and not appear to be flat!

It is impossible to determine whether or not tires are properly inflated just by looking at them.

Checking Tire Pressure

1. When you check the air pressure, make sure the tires are cold

― meaning they are not hot from driving even a mile.

2. Remove the cap from the valve on one tire.

3. Firmly press a tire gauge onto the valve.

4. Add air to achieve recommended air pressure.

5. If you overfill the tire, release air by pushing on the metal stem in the center of the valve. Then recheck the pressure with your tire gauge.

6. Replace the valve cap.

7. Repeat with each tire, including the spare.

NOTE

Some spare tires require higher inflation pressure.

8. Visually inspect the tires to make sure there are no nails or other objects embedded that could poke a hole in the tire and cause an air leak.

9. Check the sidewalls to make sure there are no gouges, cuts, bulges, cracks or other irregularities.

NOTE

Warm tires normally exceed recommended pressures. Don't release air from warm tires to adjust the pressure.

Under-inflation can cause serious failures and accidents.

Over-inflation can produce a harsh ride and the greater possibility of damage from road hazards.

9-29

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page330

Monday, June 18 2012 1:50 PM

Black plate (330,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada) q

Glossary of Terms

Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicle can carry.

Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size, and date of manufacture.

Inflation Pressure:

A measure of the amount of air in a tire.

kPa:

Kilopascal, the metric unit for air pressure.

psi:

Pounds per square inch, the English unit for air pressure.

B-pillar:

The structural member at the side of the vehicle behind the front door.

Original Equipment (OE):

Describes components originally equipped on the vehicle.

Vehicle Load Limit:

The maximum value of the combination weight of occupants and cargo.

Bead Area of the Tire: Area of the tire next to the rim.

Sidewall Area of the Tire: Area between the bead area and the tread.

Tread Area of the Tire: Area on the perimeter of the tire that contacts the road when it's mounted on the vehicle.

Seating capacity means the total allowable number of vehicle occupants. Seating capacity is described on the tire label.

Production options weight is the combination weight of installed regular production options weighing over 2.3 kilograms in excess of the standard items which they replace, and not previously considered in the curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim.

Rim is the metal support (wheel) for a tire or a tire and tube assembly upon which the tire beads are seated.

9-30

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page331

Monday, June 18 2012 1:50 PM

Black plate (331,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

Tire Maintenance

Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Here are some important maintenance points: q

Tire Inflation Pressure

Inspect all tire pressure monthly (including the spare) when the tires are cold. Maintain recommended pressures for the best ride, top handling, and minimum tire wear. Use the pressures specified on the vehicle tire information placard or tire label for optimum service.

Tire Rotation

To equalize tread wear, rotate the tires every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, inspect them for correct balance.

Forward

Do not include (TEMPORARY USE ONLY) spare tire in rotation.

Inspect the tires for uneven wear and damage. Abnormal wear is usually caused by one or a combination of the following: l l

Incorrect tire pressure

Improper wheel alignment l l

Out-of-balance wheel

Severe braking

After rotation, inflate all tire pressures to specification (page 10-6) and inspect the lug nuts for tightness.

CAUTION

Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or studs only from front to rear, not from side to side. Tire performance will be weakened if rotated from side to side.

9-31

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page332

Monday, June 18 2012 1:50 PM

Black plate (332,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada) q

Replacing a Tire

WARNING

Always use tires that are in good condition:

Driving with worn tires is dangerous. Reduced braking, steering, and traction could result in an accident.

If a tire wears evenly, a wear indicator will appear as a solid band across the tread.

Replace the tire when this happens.

Tread wear indicator

New tread Worn tread

You should replace the tire before the band crosses the entire tread.

NOTE

Tires degrade over time, even when they are not being used on the road. It is recommended that tires generally be replaced when they are 6 years or older. Heat caused by hot climates or frequent high loading conditions can accelerate the aging process. You should replace the spare tire when you replace the other road tires due to the aging of the spare tire. The period in which the tire was manufactured (both week and year) is indicated by a 4-digit number.

Refer to Tire Labeling on page 9-22.

Safety Practices

The way you drive has a great deal to do with your tire mileage and safety. So cultivate good driving habits for your own benefit.

l l l

Observe posted speed limits

Avoid fast starts, stops and turns

Avoid potholes and objects on the road l

Do not run over curbs or hit the tire against the curb when parking

9-32

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page333

Monday, June 18 2012 1:50 PM

Black plate (333,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

CAUTION

If you feel a sudden vibration or ride disturbance while driving or you suspect your tire or vehicle has been damaged, immediately reduce your speed. Drive with caution until you can safely pull off the road. Stop and inspect the tire for damage. If the tire is under-inflated or damaged, deflate it, remove the tire and rim and replace it with your spare tire. If you cannot detect a cause, have the vehicle towed to the nearest vehicle or tire dealer to have the vehicle inspected.

Downloaded from

Form No.8CL7-EA-12H

9-33

Mazda2_8CL7-EA-12H_Edition1 Page334

Monday, June 18 2012 1:50 PM

Black plate (334,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

Vehicle Loading

WARNING

Do not tow a trailer with this vehicle:

Towing a trailer with this vehicle is dangerous because it has not been designed to tow a trailer and doing so will affect the drive system which could result in vehicle damage.

This section will guide you in the proper loading of your vehicle, to keep your loaded vehicle weight within its design rating capability. Properly loading your vehicle will provide maximum return of vehicle design performance. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle's weight ratings, from the vehicle's Safety Certification Label and Tire and Load Information Label:

WARNING

Overloaded Vehicle:

Overloading a vehicle is dangerous. The results of overloading can have serious consequences in terms of passenger safety. Too much weight on a vehicle's suspension system can cause spring or shock absorber failure, brake failure, handling or steering problems, irregular tire wear, tire failure or other damage.

Overloading makes a vehicle harder to drive and control. It also increases the distance required for stopping. In cases of serious overloading, brakes can fail completely, particularly on steep grades. The load a tire will carry safely is a combination of the size of the tire, its load range, and corresponding inflation pressure.

Never overload the vehicle and always observe the vehicle's weight ratings from the vehicle's Safety Certification and Tire and Load Information labels.

9-34

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page335

Monday, June 18 2012 1:50 PM

Black plate (335,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

Base Curb Weight is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment.

Vehicle Curb Weight is the weight of your new vehicle when you picked it up from your dealer plus any aftermarket equipment.

PAYLOAD

Payload is the combination weight of cargo and passengers that the vehicle is designed to carry. The maximum payload for your vehicle can be found on the Tire and Load

Information label on the driver's door frame or door pillar. Look for

“

THE

COMBINATION WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER

EXCEED XXX kg or XXX lbs

” for your maximum payload. The payload listed on the tire label is the maximum payload for the vehicle as built by the assembly plant. If any aftermarket or dealer installed equipment has been installed on the vehicle, the weight of the equipment must be subtracted from the payload listed on the tire label in order to be accurate.

9-35

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page336

Monday, June 18 2012 1:50 PM

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

SAMPLE

Black plate (336,1)

CARGO

Cargo Weight includes all weight added to the Base Curb Weight, including cargo and optional equipment.

The cargo weight limit decreases depending on the number of vehicle occupants. The cargo weight limit can be calculated by subtracting the total weight of the vehicle occupants from the

“ combination weight of occupants and cargo should never exceed

” value on the tire label.

9-36

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page337

Monday, June 18 2012 1:50 PM

Black plate (337,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg

(849 lbs) for the

“ combination weight of occupants and cargo should never exceed

”

The cargo weight limit with one occupant is 385 kg (849 lbs) _ 68 kg (150 lbs) = 317 kg

(699 lbs)

The cargo weight limit with two occupants is 385 kg (849 lbs) _ (68 × 2) kg ( (150 × 2) lbs) = 249 kg (549 lbs)

If the weight of the occupant increases, the cargo weight limit decreases by that much.

GAW (Gross Axle Weight) is the total weight placed on each axle (front and rear) including vehicle curb weight and all payload.

GAWR (Gross Axle Weight Rating) is the maximum allowable weight that can be carried by a single axle (front or rear).

These numbers are shown on the Safety Compliance

Certification Label located on the driver's door frame or door pillar. The total load on each axle must never exceed its GAWR.

GVW

GVW (Gross Vehicle Weight) is the Vehicle Curb Weight cargo passengers.

GVWR (Gross Vehicle Weight Rating) is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo).

The GVWR is shown on the Safety Compliance Certification Label located on the driver's door frame or door pillar. The GVW must never exceed the GVWR.

9-37

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page338

Monday, June 18 2012 1:50 PM

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

SAMPLE

Black plate (338,1)

WARNING

Exceeding Axle Weight Rating Limits:

Exceeding the Safety Certification Label axle weight rating limits is dangerous and could result in death or serious injury as a result of substandard vehicle handling, performance, engine, transmission and/or structural damage, serious damage to the vehicle, or loss of control.

Always keep the vehicle within the axle weight rating limits.

Do not tow a trailer with this vehicle:

Towing a trailer with this vehicle is dangerous because it has not been designed to tow a trailer and doing so will affect the drive system which could result in vehicle damage.

9-38

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page339

Monday, June 18 2012 1:50 PM

Black plate (339,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

GCW

GCW (Gross Combination Weight) is the weight of the loaded vehicle (GVW).

GCWR (Gross Combination Weight Rating) is the maximum allowable weight of the vehicle - including all cargo and passengers - that the vehicle can handle without risking damage.

The GCW must never exceed the GCWR.

WARNING

Exceeding GVWR or GAWR Specifications:

Exceeding the GVWR or the GAWR specified on the certification label is dangerous.

Exceeding any vehicle rating limitation could result in a serious accident, injury, or damage to the vehicle.

Do not use replacement tires with lower load carrying capacities than the originals because they may lower the vehicle's GVWR and GAWR limitations. Replacement tires with a higher limit than the originals do not increase the GVWR and GAWR limitations.

Never exceed the GVWR or the GAWR specified on the certification label.

9-39

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page340

Monday, June 18 2012 1:50 PM

Black plate (340,1)

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

Steps for Determining the Correct Load Limit

Steps for Determining Correct Load Limit-

(1) Locate the statement

“

The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs

”

on your vehicle's placard.

(2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.

(3) Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.

(4) The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the

“

XXX

”

amount equals 1400 lbs. and there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400 _ 750 (5 × 150) = 650 lbs.)

(5) Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.

(6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.

9-40

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page341

Monday, June 18 2012 1:50 PM

Black plate (341,1)

Customer Information and Reporting Safety Defects

Reporting Safety Defects

Reporting Safety Defects (U.S.A.)

If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway

Traffic Safety Administration (NHTSA) in addition to notifying Mazda Motor

Corporation (Your Mazda Importer/Distributor).

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Mazda Motor Corporation (Your Mazda

Importer/Distributor).

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-

327-4236 (TTY:1-800-424-9153) ; go to http://www.safercar.gov; or write to:

Administrator, NHTSA, 1200 New Jersey Avenue, SE., Washington, DC,

20590. You can also obtain other information about motor vehicle safety from http://www.safercar.gov.

NOTE

If you live in the U.S.A., all correspondence to Mazda Motor Corporation should be forwarded to:

Mazda North American Operations

7755 Irvine Center Drive

Irvine, California 92618-2922 or

P.O. Box 19734

Irvine, CA 92623-9734

Customer Assistance Center or toll free at 1 (800) 222-5500

If you live outside of the U.S.A., please contact the nearest Mazda Distributor shown (page 9-11) in this booklet.

9-41

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page342

Monday, June 18 2012 1:50 PM

Black plate (342,1)

Customer Information and Reporting Safety Defects

Reporting Safety Defects

Reporting Safety Defects (Canada)

Canadian customers who wish to report a safety-related defect to Transport Canada, Defect

Investigations and Recalls, may telephone the toll free hotline 1-800-333-0510, or contact

Transport Canada by mail at: Transport Canada, ASFAD, Place de Ville Tower C, 330

Sparks Street, Ottawa ON K1A 0N5.

For additional road safety information, please visit the Road Safety website at: http://www.tc.gc.ca/roadsafety/menu.htm

9-42

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page343

Monday, June 18 2012 1:50 PM

Black plate (343,1)

Customer Information and Reporting Safety Defects

Service Publications

Factory-authorized Mazda service publications are available for owners who wish to do some of their own maintenance and repair.

When requesting any of our publications through an Authorized Mazda Dealer, refer to the chart below.

If they do not have what you need in stock, they can order it for you.

PUBLICATION ORDER NUMBER

9999-95-026B-13

9999-95-077G-13

9999-95-002C-13

9999-EC-002C-13

9999-PR-002C-13

9999-95-MODL-13

PUBLICATION DESCRIPTION

2013 WORKSHOP MANUAL (English)

2013 WIRING DIAGRAM (English)

2013 OWNER'S MANUAL (English)

2013 OWNER'S MANUAL (English and French)

2013 OWNER'S MANUAL (Spanish)

2013 SERVICE HIGHLIGHTS q

WORKSHOP MANUAL:

Covers recommended maintenance and repair procedures of the drive train, body and chassis.

WIRING DIAGRAM:

Provides electrical schematics as well as component location for the entire electrical system.

OWNER'S MANUAL:

This booklet contains information regarding the proper care and operation of your vehicle.

This is not a technician's manual.

SERVICE HIGHLIGHTS:

Provides description and operation of the many systems of your Mazda.

9-43

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page344

Monday, June 18 2012 1:50 PM

Black plate (344,1)

9-44

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page345

Monday, June 18 2012 1:50 PM

Black plate (345,1)

Specifications

Technical information about your Mazda.

Identification Numbers ............................................................... 10-2

Vehicle Information Labels ..................................................... 10-2

Specifications ............................................................................... 10-4

Specifications .......................................................................... 10-4

Personalization Features ............................................................ 10-8

Personalization Features .......................................................... 10-8

Downloaded from

Form No.8CL7-EA-12H

10-1

Mazda2_8CL7-EA-12H_Edition1 Page346

Monday, June 18 2012 1:50 PM

Black plate (346,1)

Identification Numbers

Vehicle Information Labels

Vehicle Identification Number

The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the cowl panel located on the left corner of the dashboard. This plate can easily be seen through the windshield.

Chassis Number

Open the cover shown in the figure to check the chassis number.

Vehicle Emission Control

Information Label

Motor Vehicle Safety Standard Label

10-2

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page347

Monday, June 18 2012 1:50 PM q

Tire Pressure Label

Black plate (347,1)

Identification Numbers q

Engine Number

Forward

Downloaded from

Form No.8CL7-EA-12H

10-3

Mazda2_8CL7-EA-12H_Edition1 Page348

Monday, June 18 2012 1:50 PM

Black plate (348,1)

Specifications

Engine

Item

Type

Bore × Stroke

Displacement

Compression ratio

Specification

DOHC-16V in-line, 4-cylinder

78.0 × 78.4 mm (3.07 × 3.09 in)

1,498 ml (1,498 cc, 91.4 cu in)

10.0

Electrical System

Item

Battery

Spark-plug number

Classification

12V-50Ah/20HR, 12V-65Ah/20HR

Mazda Genuine spark plug ZJY6-18-110, Z6B7-18-110

CAUTION

When cleaning the iridium plugs, do not use a wire brush. The fine particulate coating on the iridium alloy and platinum tips could be damaged.

Lubricant Quality

Engine oil

Manual transaxle oil

Automatic transaxle fluid

Brake/Clutch fluid

Lubricant type and classification

Refer to Recommended Oil on page 8-13.

API Service GL-4

SAE 75W-80

Mazda Genuine ATF M-V

SAE J1703 or FMVSS116 DOT-3

NOTE

Refer to Introduction on (page 8-2) for owner's responsibility in protecting your investment.

10-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page349

Monday, June 18 2012 1:50 PM

Black plate (349,1)

Specifications q

Capacities

(Approximate Quantities)

Item

Engine oil

Coolant

Manual transaxle oil

Automatic transaxle fluid

Fuel tank

With oil filter replacement

Without oil filter replacement

Manual transaxle

Automatic transaxle

Check oil and fluid levels with dipsticks or reservoir gauges.

Dimensions

Overall length

Item

With front license plate mount cover

Without front license plate mount cover

Overall width

Overall height

Front tread

Rear tread

Wheelbase q

Weights

Item

GVWR (Gross Vehicle Weight Rating)

GAWR

(Gross Axle Weight Rating)

Front

Rear q

Air Conditioner

Item

Refrigerant Type

Capacity

3.9 L (4.1 US qt, 3.4 Imp qt)

3.7 L (3.9 US qt, 3.3 Imp qt)

5.1 L (5.4 US qt, 4.5 Imp qt)

5.4 L (5.7 US qt, 4.8 Imp qt)

2.91 L (3.07 US qt, 2.56 Imp qt)

7.0 L (7.4 US qt, 6.2 Imp qt)

42.8 L (11.3 US gal, 9.41 Imp gal)

Vehicle specification

3,965 mm (156.1 in)

3,955 mm (155.7 in)

1,695 mm (66.7 in)

1,475 mm (58.1 in)

1,476 mm (58.1 in)

1,466 mm (57.7 in)

2,490 mm (98 in)

Manual transaxle

1,480 kg (3,263 lbs)

774 kg (1,706 lbs)

706 kg (1,556 lbs)

Weight

Automatic transaxle

1,502 kg (3,311 lbs)

799 kg (1,761 lbs)

703 kg (1,550 lbs)

Classification

HFC134a (R-134a)

10-5

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page350

Monday, June 18 2012 1:50 PM

Black plate (350,1)

Specifications q

Light Bulbs

Exterior light

Headlights

Light bulb

Front turn signal lights

Parking lights (Front side-marker lights)

Fog lights

Side turn signal lights

Rear turn signal lights

Reverse lights

License plate light

High-mount brake light

Brake lights/Taillights (Rear side-marker lights)

Wattage

60/55

LED

21/5

Tires

NOTE

The tires have been optimally matched with the chassis of your vehicle.

When replacing tires, Mazda recommends that you replace tires of the same type originally fitted to your vehicle. For details, contact an Authorized Mazda Dealer.

Check the tire pressure label for tire size and inflation pressure. Refer to Tire Inflation

Pressure on page 8-27.

Standard tire

Inflation pressure

Tire size

185/55R15 82V

Front

220 kPa (32 psi)

Rear

210 kPa (30 psi)

Temporary spare tire

Tire size

T115/70D14 88M

Inflation pressure

420 kPa (60 psi)

10-6

Some models.

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page351

Monday, June 18 2012 1:50 PM q

Fuses

Refer to Fuses on page 8-39.

Black plate (351,1)

Specifications

Downloaded from

Form No.8CL7-EA-12H

10-7

Mazda2_8CL7-EA-12H_Edition1 Page352

Monday, June 18 2012 1:50 PM

Black plate (352,1)

Personalization Features

The following

“

Personalization Features

” are available. These settings can only be changed by an Authorized

Mazda Dealer.

Item Feature

Auto headlight on/off

The headlight illumination on/off timing based on surrounding lightness/darkness can be changed

Factory Setting Available Settings

Standard

(Illuminates under average levels of darkness)

Earlier/

Somewhat earlier/

Somewhat later/

Later

Two-step down power window

The two-step down power window function can be changed

Adjusts the window opening range

Activated

3 cm (1 in) 2

―

Deactivated

10 cm (0.8

―

3.9 in)

10-8

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page353

Monday, June 18 2012 1:50 PM

Index

Black plate (353,1)

Downloaded from

Form No.8CL7-EA-12H

11-1

Mazda2_8CL7-EA-12H_Edition1 Page354

Monday, June 18 2012 1:50 PM

Black plate (354,1)

Index

Accessory Socket .............................. 6-54

Add-On Non-Genuine Parts and

Accessories ....................................... 9-17

Air Bag Systems ............................... 2-36

Antenna ............................................... 6-9

Anti-Lock Brake System (ABS) ......... 5-8

Warning light ............................... 5-8

Appearance Care ............................... 8-45

Audio System ..................................... 6-9

Audio control switch .................. 6-37

Audio set .................................... 6-23

AUX/USB/iPod mode ................ 6-39

Operating tips for audio system ........................................ 6-10

Safety certification ..................... 6-49

Automatic Transaxle ......................... 5-12

Driving tips ................................ 5-14

Fluid ........................................... 8-17

Overdrive ................................... 5-14

Shift-lock system ....................... 5-13

Transaxle ranges ........................ 5-12

Battery

Emergency starting .................... 7-17

Maintenance ............................... 8-24

Specifications ............................. 10-4

Beep Sounds

Ignition key reminder ................. 5-49

Lights-on reminder ..................... 5-49

Seat belt warning ........................ 5-49

Tire inflation pressure warning ... 5-49

Before Starting the Engine .................. 4-5

After getting in ............................. 4-5

Before getting in .......................... 4-5

Body Lubrication .............................. 8-20

Bottle Holder ..................................... 6-52

11-2

Brake/Clutch

Fluid ........................................... 8-16

Brakes

Anti-lock brake system (ABS) ..... 5-8

Brakes assist ................................. 5-9

Foot brake .................................... 5-5

Pad wear indicator ...................... 5-10

Parking brake ............................... 5-6

Warning light ............................... 5-7

Break-In Period ................................... 4-6

Bulb Replacement ............................. 8-32

Capacities .......................................... 10-5

Carbon Monoxide ............................... 4-4

Catalytic Converter ............................. 4-3

Cell Phones ....................................... 9-18

Center Console Tray ......................... 6-53

Child Restraint

Child restraint precautions ......... 2-21

Child-restraint system installation position ...................................... 2-25

Installing child-restraint systems ....................................... 2-26

LATCH child-restraint systems ....................................... 2-32

Child Safety Locks for Rear Doors ... 3-10

Climate Control System ...................... 6-2

Gas specifications ...................... 10-5

Cruise Control ................................... 5-16

Cup Holder ........................................ 6-51

Customer Assistance ........................... 9-2

Dashboard Illumination .................... 5-32

Daytime Running Lights ................... 5-52

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page355

Monday, June 18 2012 1:50 PM

Black plate (355,1)

Index

Defroster

Mirror ......................................... 5-58

Rear window .............................. 5-58

Dimensions ....................................... 10-5

Door Locks ......................................... 3-7

Driving In Flooded Area ................... 4-10

Driving on Uneven Road .................. 4-11

Driving Tips ........................................ 4-6

Automatic transaxle ................... 5-14

Break-in period ............................ 4-6

Driving in flooded area .............. 4-10

Driving on uneven road .............. 4-11

Hazardous driving ........................ 4-7

Money-saving suggestions ........... 4-6

Rocking the vehicle ...................... 4-8

Winter driving .............................. 4-8

Dynamic Stability Control (DSC) ..... 5-21

DSC OFF indicator light ............ 5-22

DSC OFF switch ........................ 5-22

TCS/DSC indicator light ............ 5-21

Emergency Starting ........................... 7-17

Flooded engine ........................... 7-17

Jump-starting .............................. 7-18

Push-starting .............................. 7-21

Emergency Towing ........................... 7-22

Emission Control System .................... 4-3

Engine

Coolant ....................................... 8-14

Exhaust gas .................................. 4-4

Hood release .............................. 3-19

Oil .............................................. 8-13

Overheating ................................ 7-15

Starting ......................................... 5-3

Engine Compartment Overview ........ 8-12

Engine Coolant

Overheating ................................ 7-15

Event Data Recorder ......................... 9-19

Exhaust Gas ........................................ 4-4

Exterior Care ..................................... 8-47

Flasher

Hazard warning .......................... 5-59

Headlights .................................. 5-50

Flat Tire ............................................... 7-3

Changing ...................................... 7-6

Spare tire and tool storage ............ 7-3

Fluids

Classification .............................. 10-4

Owner maintenance ..................... 8-9

Fog Lights ......................................... 5-53

Foot Brake .......................................... 5-5

Front Seats .......................................... 2-2

Fuel

Filler lid and cap ........................ 3-18

Gauge ......................................... 5-31

Requirements ............................... 4-2

Tank capacity ............................. 10-5

Fuses ................................................. 8-39

Panel description ........................ 8-42

Replacement ............................... 8-39

Gauges .............................................. 5-29

Glove Compartment .......................... 6-53

Hazard Warning Flasher .................... 5-59

Hazardous Driving .............................. 4-7

11-3

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page356

Monday, June 18 2012 1:50 PM

Black plate (356,1)

Index

Head Restraint .................................... 2-7

Headlights

Control ....................................... 5-50

Flashing ...................................... 5-52

High-low beam .......................... 5-52

On reminder ............................... 5-51

Hood Release .................................... 3-19

Horn .................................................. 5-59

Ignition

Keys ............................................. 3-2

Switch .......................................... 5-2

Illuminated Entry System ................. 6-50

Immobilizer System .......................... 3-22

Indicator Lights ................................. 5-36

Cruise ......................................... 5-47

DSC OFF .................................... 5-46

Headlight high-beam .................. 5-45

Low engine coolant temperature ................................ 5-46

O/D OFF .................................... 5-45

Power steering malfunction ........ 5-47

Security ...................................... 5-45

Shift position .............................. 5-46

TCS/DSC ................................... 5-46

Turn signal/hazard warning ........ 5-47

Instrument Cluster ............................. 5-29

Interior Care ...................................... 8-51

Interior Lights ................................... 6-50

Jump-Starting .................................... 7-18

Keyless Entry System ......................... 3-3

Keys .................................................... 3-2

Label Information ............................. 10-2

Lane-Change Signals ........................ 5-53

Liftgate .............................................. 3-10

Luggage compartment ............... 3-13

Light Bulbs

Replacement ............................... 8-32

Specifications ............................. 10-6

Lighting Control ............................... 5-50

Lubricant Quality .............................. 10-4

Luggage Compartment Light ............ 6-51

Maintenance

Introduction .................................. 8-2

Owner maintenance schedule ....... 8-9

Scheduled ..................................... 8-4

Manual Transaxle Operation ............. 5-10

Recommendations for shifting.... 5-11

Meters and Gauges ........................... 5-29

Mirror Defroster ................................ 5-58

Mirrors

Outside mirrors .......................... 3-25

Rearview mirror ......................... 3-26

Money-Saving Suggestions ................ 4-6

Odometer and Trip Meter .................. 5-30

Outside Mirrors ................................. 3-25

Overhead Light ................................. 6-50

Overheating ....................................... 7-15

Overloading ...................................... 4-10

11-4

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page357

Monday, June 18 2012 1:50 PM

Black plate (357,1)

Index

Paint Damage .................................... 8-45

Parking Brake ..................................... 5-6

Parking in an Emergency .................... 7-2

Personalization Features ................... 10-8

Power Door Locks .............................. 3-8

Power Steering .................................. 5-15

Power steering malfunction indicator light ............................................ 5-15

Power Windows ................................ 3-15

Push-Starting ..................................... 7-21

Rear Door Child Safety Locks .......... 3-10

Rear Seat ............................................. 2-4

Rear Window Defroster .................... 5-58

Rear Window Washer ....................... 5-57

Rear Window Wiper .......................... 5-57

Rearview Mirror ................................ 3-26

Recreational Towing ......................... 7-24

Registering Your Vehicle in A Foreign

Country ............................................. 9-16

Rocking the Vehicle ............................ 4-8

Safety Defects, Reporting ................. 9-41

Seat Belt System

3-point type ................................ 2-13

Automatic locking ...................... 2-12

Emergency locking .................... 2-11

Extender ..................................... 2-17

Pregnant women ......................... 2-11

Pretensioner and load limiting .... 2-15

Seat belt precautions .................... 2-9

Seat belt reminder ....................... 2-19

Warning light ............................. 2-19

Seats

Front seat ...................................... 2-2

Head restraint ............................... 2-7

Rear seat ....................................... 2-4

Security System

Immobilizer system .................... 3-22

Service Publications .......................... 9-43

Spare Tire and Tool Storage ................ 7-3

Specifications .................................... 10-4

Speedometer ...................................... 5-30

SRS Air Bags

Driver and front passenger occupant classification system .................. 2-50

How the SRS air bags work ....... 2-42

Limitations to SRS air bag ......... 2-48

Monitoring and maintenance ..... 2-55

SRS air bag deployment criteria ........................................ 2-47

Supplemental restraint system

(SRS) precautions ...................... 2-36

Supplemental restraint system components ................................ 2-41

Starting the Engine .............................. 5-3

Steering Wheel .................................. 3-25

Horn ........................................... 5-59

Storage Compartments ...................... 6-53

Center Console Tray ................... 6-53

Glove Compartment ................... 6-53

Sunvisors .......................................... 6-50

Tachometer ........................................ 5-31

Temporary Spare Tire ....................... 8-30

Tiedown

Hook .......................................... 7-23

Tire Information ................................ 9-22

11-5

Downloaded from

Form No.8CL7-EA-12H

Mazda2_8CL7-EA-12H_Edition1 Page358

Monday, June 18 2012 1:50 PM

Black plate (358,1)

Index

Tire Pressure Monitoring System ...... 5-23

System error activation .............. 5-27

Tire pressure monitoring system warning light .............................. 5-25

Tires and wheels ......................... 5-27

Tires

Flat Tire ........................................ 7-3

Inflation pressure ........................ 8-27

Replacement ............................... 8-29

Rotation ...................................... 8-28

Snow tires .................................... 4-9

Spare tire and tool storage ............ 7-3

Specifications ............................. 10-6

Tire chains .................................... 4-9

Uniform tire quality grading system

(UTQGS) ................................... 9-20

Tool ..................................................... 7-3

Towing

Description ................................. 7-22

Emergency towing ..................... 7-22

Hook .......................................... 7-23

Recreational towing ................... 7-24

Trailer towing ............................. 4-12

Traction Control System (TCS) ........ 5-20

TCS/DSC indicator light ............ 5-20

Trailer Towing .................................. 4-12

Trip Computer ................................... 5-32

Trip Meter ......................................... 5-30

Turn and Lane-Change Signals ......... 5-53

Vanity Mirrors ................................... 6-50

Vehicle Information Labels ............... 10-2

Warning Lights ................................. 5-36

ABS ............................................ 5-39

Air bag system ........................... 5-41

Brake system .............................. 5-38

Charging system ......................... 5-40

Check engine .............................. 5-40

Check fuel cap ........................... 5-42

Door-ajar .................................... 5-42

Engine oil pressure ..................... 5-40

Front seat belt pretensioner system ........................................ 5-41

High engine coolant temperature ................................ 5-41

Low washer fluid level ............... 5-42

Malfunction ................................ 5-38

Seat belt ...................................... 5-42

Tire pressure monitoring system ........................................ 5-43

Warranty ............................................ 9-12

Washer Fluid ..................................... 8-19

Weights ............................................. 10-5

Wheel Replacement .......................... 8-31

Windows

Power windows .......................... 3-15

Windshield Washer ........................... 5-57

Windshield Wipers ............................ 5-54

Blades replacement .................... 8-20

Winter Driving .................................... 4-8

11-6

Downloaded from

Form No.8CL7-EA-12H